Related
To somebody that wants it, i've paid 10 dollars to have this link, Saved my phone after 20 days of bricking.
If you mod your build.prop to another model, you will have problems to use KDZ, then, never do it, but if do, this TOT can save you,
The DLL to use in Flash Tool is in the atachment
https://mega.co.nz/#!7wBnkCKR!zT19XISIhlrP3-ZN24TF5RFeFVOt1vOlOHdPl-lYE4o
Is so good to see it back, i thought i would need to use to hold paper.
Hi everybody,
i try these files but my phone is LG D958 and now is my phone brick situation. when i tried theese files i seen
" CrossDL [] to [D958]. SWversion[] "
i need dll files for save my phone
- DLL files-LGD958_20131202_LGFLASHv160.zip
or who can give me information how can i change dll file for my d958 ??
Thanks everybody
Maikeu,
Did you happen to notice where you got this from if the D959 (TMobile Version) was available? I would pay for others to have this as I screwed up my phone and couldn't get the kdz to work and without a TOT i was pretty much SOL. I ended up sending the phone back to LG and luckly they repaired it for free.
I swore there was a Korean or Chinese website that was selling the D959 TOT file but I didn't know how to go about paying for it. If you have access to this PM and I'll gladly pay to help out the community.
Thanks!
I don't know how you managed to find TOT d958 file when 958 uses Kdz files!?
Is this some other version of 958 or what?
As I know there's only one and it uses Kdz files!?
please re share tot file of d958. i really need it urgently.
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
An3ru said:
Hello everyone,
Im new at Rooting, but I'm good at following instruction from videos, forums, and whatever I get my hands on. I have an LG G4, that I recently rooted. There are some issue with Root, and some applications I cant run (like snapchat- I had tried with Rootswitcher and Magisk but failed).
I followed instructions from several videos and forums here at Xda-Devs. But nothing seems to work. I have download multiple firmwares but everytime i get an error. the lgflashtool14 goes up to 9 % and there is some logs in my phone, but everything stops.
Also I want to mentioned that this are the steps that i rooted
Please any help will be appreciated, I want to go back to stock. :fingers-crossed:
Edit : I have tried all variants of the firmware, some they not even get stuck they say " contact administrator "
Click to expand...
Click to collapse
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
raptorddd said:
why flash other variants? what phone you have,?? why use flashtools and not LGUP try LGUP.
Click to expand...
Click to collapse
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
An3ru said:
Hey Raptorddd,
I have a LG G4 h811. And i been trying using LGUp but when i plug my phone under model it says "unlnown". I been trying to fix with but with no solution. Well other t mobile variants i meant there are like 4 out there and i have different errors.
Click to expand...
Click to collapse
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
An3ru said:
Hey man, I followed your instructions, and in one side of the motherboard says, EAX #####501_h810_main_1.0. Would that be the firmware im looking for.??
*edit : its weird since I look up the H810 is a ATT, but I got this Phone in Tmobile
*edit 2: by dialing *#*#244773825625#*#* it gives me this - HW version Rev1.0 - Factory Version LGH811AT-01-V20r-310-260-jan-11-2017-arb03-SW ORIGINAL VERSION *same as the factory version*- Anti rollback version 3-
Click to expand...
Click to collapse
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
raptorddd said:
then i think its not a h811. open up phone and take motherborad out see what it says on the actual motherboard in your hand, what ever it says flash that, maybe is not a h811
Click to expand...
Click to collapse
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
raptorddd said:
go by what the motherboard says.. if you got it from tmobile return it.
yes seems yours its a att 810
motherboard is what determines your variant other things can be edited but not that number and printing on mitherboard
yes weird they might be refurbishing phone using other motherboards
Click to expand...
Click to collapse
Ok, but i might not be able to return it since its past the year. And with LGup I open the software and states that MODEL "unknown" and gets the COM port and the software im runing in a small window. Is there any fix for it, that you know of?.
An3ru said:
Well I got it more than a year, unfortunately. Also I tried LGup and it gets the port and what software Im using, But model says unknown. I want to select the phone, but first i have to select the model, is there any fix in this situation?!
Click to expand...
Click to collapse
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
raptorddd said:
do you have the h810 KDZ .? not sure i can help much more.. maybe try in the KDZ go back to stock thread or do search..
or try updating this files
https://forum.xda-developers.com/showpost.php?p=73631178&postcount=931
Click to expand...
Click to collapse
I have it, but I attempt to flash it with lgflashtools and still stuck at 9%. Also tried LGup, and still im unable to do anything with that program
hi guys
i have g4 h811 20r just flash stock kdz 20r by lgup but now my phone is hard bricked !! " No charging / No download mode / Nothing at all " , is there any way to fix it?? i just flash kdz
plz help my phone is dead
Sounds like you had the same issue as someone else. Try this thread out and make sure you read through the posts. Seems to work for some and not for others, but mostly for those with this type of brick it will at least get you back up to where LGup should work, and from there you can get fixes.
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629
So this is not my work but it works for cricket stylo 2
https://forum.xda-developers.com/lg-g5/how-to/unlocking-lgup-features-fun-profit-t3634650
Gives you the basics
Get lg up version------------------------------------LGUP_1.14.0.3 Can be downloaded at
https://mega.nz/#!x9YTHITI!kg4_zZLubILUywZKri5HgWDlUUUsP_z8OcOmNw6oEos
Get common dll msi---------------------------------------LGUP_Common_DLL_Ver_1_0_28_5 Can be downloaded at
https://mega.nz/#!TwNwUYwJ!ZTBcxmEkerLcp-2Ri66TOsZBf8LQl7qwoD2fmoJSCsc
The lgup patch and thank this man here.....
https://forum.xda-developers.com/showpost.php?p=73051003&postcount=32
And lastly we need the 8994 dll here-------------------
https://mega.nz/#!VhpDxKoI!Mo0LcQOVOjcM337Vs2X87KoEMvE3HApYgpFNMYEl4XU
So install lgup and all the .dlls
and open the patch and navigate it to wherever LGup is installed......
Run the patch.....
And like the thread says Profit.......
But I am in the process of dumping my k540 rite now.....
There is currently no way to flash dump partitions back.... As LGup crashes.....
Also the dump files are in a com# format to even think about using them they need to be in a .MBN format
But its a start boys and girls.....
Also as a side note Be carefule as this can brick your device if you go flashing PRLs and chip erases and such....
Some assistance is needed.
TheMadScientist said:
So this is not my work but it works for cricket stylo 2
https://forum.xda-developers.com/lg-g5/how-to/unlocking-lgup-features-fun-profit-t3634650
Gives you the basics
Get lg up version------------------------------------LGUP_1.14.0.3 Can be downloaded at
https://mega.nz/#!x9YTHITI!kg4_zZLubILUywZKri5HgWDlUUUsP_z8OcOmNw6oEos
Get common dll msi---------------------------------------LGUP_Common_DLL_Ver_1_0_28_5 Can be downloaded at
https://mega.nz/#!TwNwUYwJ!ZTBcxmEkerLcp-2Ri66TOsZBf8LQl7qwoD2fmoJSCsc
The lgup patch and thank this man here.....
https://forum.xda-developers.com/showpost.php?p=73051003&postcount=32
And lastly we need the 8994 dll here-------------------
https://mega.nz/#!VhpDxKoI!Mo0LcQOVOjcM337Vs2X87KoEMvE3HApYgpFNMYEl4XU
So install lgup and all the .dlls
and open the patch and navigate it to wherever LGup is installed......
Run the patch.....
And like the thread says Profit.......
But I am in the process of dumping my k540 rite now.....
There is currently no way to flash dump partitions back.... As LGup crashes.....
Also the dump files are in a com# format to even think about using them they need to be in a .MBN format
But its a start boys and girls.....
Also as a side note Be careful as this can brick your device if you go flashing PRLs and chip erases and such....
Click to expand...
Click to collapse
Hey, how do you get this to work? I've installed everything as indicated and the tool shows my LG-K450 (Cricket) phone as an unknown model so it wont let me proceed.
Did you run the patch and junk
hugoBOSS1981 said:
Hey, how do you get this to work? I've installed everything as indicated and the tool shows my LG-K450 (Cricket) phone as an unknown model so it wont let me proceed.
Click to expand...
Click to collapse
Get uppercut and lgup 1.4 it will find your phone and allow u to flash kdz and tots
Hello guys,
I bought new (open box) v40 on ebay and it stated V405UA unlocked. It came with Android 10 v30d.
All is working good except vibration. It doesn't vibrate at all. I tried factory reset, safe mode, application to test vibration and checking battery saver. And it doesn't work for notifications or keyboard feedback.
I contacted seller and he suggested i try to flash V40UA US android 9. I tried flashing V405UA020g_00_USC_US_OP_0424.kdz with LGUP from this forum and it showed me crossflash error (US>EU).
I then tried V405EBW android 10 V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz and it showed me different crossflash error (jadypn_lao_eea>@judypn_la).
Can you please help me identify problem with vibration or recommend what file to flash, as I cannot find any EU V405UA fw.
Thanks in advance
sojkaCZ said:
Hello guys,
I bought new (open box) v40 on ebay and it stated V405UA unlocked. It came with Android 10 v30d.
All is working good except vibration. It doesn't vibrate at all. I tried factory reset, safe mode, application to test vibration and checking battery saver. And it doesn't work for notifications or keyboard feedback.
I contacted seller and he suggested i try to flash V40UA US android 9. I tried flashing V405UA020g_00_USC_US_OP_0424.kdz with LGUP from this forum and it showed me crossflash error (US>EU).
I then tried V405EBW android 10 V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz and it showed me different crossflash error (jadypn_lao_eea>@judypn_la).
Can you please help me identify problem with vibration or recommend what file to flash, as I cannot find any EU V405UA fw.
Thanks in advance
Click to expand...
Click to collapse
whoa boy, what a mess. Well, how big of a mess depends on some unknown things, but there's potential there
First, you say u were on 30d. Which 30d? At&t? vzw? Euro version? There are a lot of 30d's.
Second, the version you were on u may not be able to get back to, if they were at&t or sprint, as they don't make thieir kdz available. No one has one, anywhere. What should have been done, if on one of those firmwares, was to use a special too (bkerler edl) to back up all your partitions first.
Third, the issues you're running into with crossflashing are pretty easily overcome. You just have to use the correct lg up version and matching dll. Also, to crossflash u have to do a partition d/l, none of the other options will work.
Fourth, vibration issue is almost certainly a hardware issue. Probably why it was an 'open box'. Personally, if that doesn't work when I buy it, I return it. It's unfortunate the seller told you to modify the phone, as that usually is the reason they will refuse a return, if it's been modified?
I'd guess the vibration thing is a hw issue, unfortunately.
So what firmware do you WANT to be on? 9 or 10? Which carrier do u use? U need firmware that has those bands. If u can't return and have to live with the no vibration, to me anyway, not end of world.
cheers
Hi,
Thanks for quick reply. I apologise for chaotic first post.
I was on european 30d, there was no further info in system menu i can recall sadly.
I solved issues with crossflashing and successfully flashed these firmwares:
V405UA21c_00_USC_US_OP_1028.kdz
V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz
but none of them solved the issue. (first one recommended by seller, second to get back to european)
Seller offered me that I can return the phone and they will solve the issue, as there is 30 day return policy and 12 month warranty. They even would pay for shipping.
I am now considering returning the phone, but I have smart bracelet which I mainly use for notifications, so I do not depend on vibrations so much. And seller is half of europe apart.
The reason I was thinking that it was software issue was that I found on xda and elsewhere that android recoverry from google backup can be corrupted and then vibrations do not work and my previous phone Xiaomi Mi A2 Lite has occasional problems with vibrations, which is odd coincidence.
Phone was sold as open-box, but the phone itself was sealed. But i think seller flashed the firmware, because it is US version with EU fw and android 10 out of the box. Seller even helped me to get right version of LGUP.
My last question would be if there is a way to tell what causes the issue, if it is hardware.
sojkaCZ said:
Hi,
Thanks for quick reply. I apologise for chaotic first post.
I was on european 30d, there was no further info in system menu i can recall sadly.
I solved issues with crossflashing and successfully flashed these firmwares:
V405UA21c_00_USC_US_OP_1028.kdz
V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz
but none of them solved the issue. (first one recommended by seller, second to get back to european)
Seller offered me that I can return the phone and they will solve the issue, as there is 30 day return policy and 12 month warranty. They even would pay for shipping.
I am now considering returning the phone, but I have smart bracelet which I mainly use for notifications, so I do not depend on vibrations so much. And seller is half of europe apart.
The reason I was thinking that it was software issue was that I found on xda and elsewhere that android recoverry from google backup can be corrupted and then vibrations do not work and my previous phone Xiaomi Mi A2 Lite has occasional problems with vibrations, which is odd coincidence.
Phone was sold as open-box, but the phone itself was sealed. But i think seller flashed the firmware, because it is US version with EU fw and android 10 out of the box. Seller even helped me to get right version of LGUP.
My last question would be if there is a way to tell what causes the issue, if it is hardware.
Click to expand...
Click to collapse
Interesting, good that your seller sounds pretty responsible. Have never used android recovery from google backup, so no help there. The only thing I can thing of to help determine what the no vibration issue is, other than opening the phone, would be to use a logcat and see if there's any error info in it.
Start the logcat just before doing something that would cause the vibration to go on, then shut the logcat. Look for errors...
Additionally, as you've experienced one significant issue, fully check everything else; camera, flash, speakers, anything and everything hw related. that's what I'd do anyway.
cheers
Nothing else seems to be defective.
I tried capturing vibrations on logcat, screenshot attached
sojkaCZ said:
Nothing else seems to be defective.
I tried capturing vibrations on logcat, screenshot attached
Click to expand...
Click to collapse
I'm no expert but from that output, seems to me the software thinks it did it's job. No indications of any problem, but it may be the software tell's it to 'vibrate' and whether it does or not, doesn't matter, as it may not have any checks for errors of any kind.
Additionally, it seems pretty unlikely LG is going to put out an OS version where something as common as the vibrate function doesn't work? Have not heard of any version doing that anyway.
cheers
sojkaCZ said:
Hello guys,
I bought new (open box) v40 on ebay and it stated V405UA unlocked. It came with Android 10 v30d.
All is working good except vibration. It doesn't vibrate at all. I tried factory reset, safe mode, application to test vibration and checking battery saver. And it doesn't work for notifications or keyboard feedback.
I contacted seller and he suggested i try to flash V40UA US android 9. I tried flashing V405UA020g_00_USC_US_OP_0424.kdz with LGUP from this forum and it showed me crossflash error (US>EU).
I then tried V405EBW android 10 V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz and it showed me different crossflash error (jadypn_lao_eea>@judypn_la).
Can you please help me identify problem with vibration or recommend what file to flash, as I cannot find any EU V405UA fw.
Thanks in advanceI
Click to expand...
Click to collapse
sojkaCZ said:
Hello guys,
I bought new (open box) v40 on ebay and it stated V405UA unlocked. It came with Android 10 v30d.
All is working good except vibration. It doesn't vibrate at all. I tried factory reset, safe mode, application to test vibration and checking battery saver. And it doesn't work for notifications or keyboard feedback.
I contacted seller and he suggested i try to flash V40UA US android 9. I tried flashing V405UA020g_00_USC_US_OP_0424.kdz with LGUP from this forum and it showed me crossflash error (US>EU).
I then tried V405EBW android 10 V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz and it showed me different crossflash error (jadypn_lao_eea>@judypn_la).
Can you please help me identify problem with vibration or recommend what file to flash, as I cannot find any EU V405UA fw.
Thanks in advance
Click to expand...
Click to collapse
You need use LGUP Dual i
sojkaCZ said:
Hello guys,
I bought new (open box) v40 on ebay and it stated V405UA unlocked. It came with Android 10 v30d.
All is working good except vibration. It doesn't vibrate at all. I tried factory reset, safe mode, application to test vibration and checking battery saver. And it doesn't work for notifications or keyboard feedback.
I contacted seller and he suggested i try to flash V40UA US android 9. I tried flashing V405UA020g_00_USC_US_OP_0424.kdz with LGUP from this forum and it showed me crossflash error (US>EU).
I then tried V405EBW android 10 V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz and it showed me different crossflash error (jadypn_lao_eea>@judypn_la).
Can you please help me identify problem with vibration or recommend what file to flash, as I cannot find any EU V405UA fw.
Thanks in advance
Click to expand...
Click to collapse
You need install lgup dualmode.
AsItLies said:
I'm no expert but from that output, seems to me the software thinks it did it's job. No indications of any problem, but it may be the software tell's it to 'vibrate' and whether it does or not, doesn't matter, as it may not have any checks for errors of any kind.
Additionally, it seems pretty unlikely LG is going to put out an OS version where something as common as the vibrate function doesn't work? Have not heard of any version doing that anyway.
cheers
Click to expand...
Click to collapse
Yeah, I have similar thoughts. Thanks for help
hoangan102 said:
You need use LGUP Dual i
You need install lgup dualmode.
Click to expand...
Click to collapse
Hi,
I have already solved flashing complications.
Do I need Dual Mode for flashing or for testing in "PHONESETTING"?