Note 9 | Cert Patch, Root and Update ... Help - Samsung Galaxy Note 9 Questions & Answers

Hello,
I need help and guidance on some things regarding N960F/DS.
My phone was rooted with magisk on android pie, so when i flashed the android 10 Q rom via odin and everything was fine except i didn't have any network and my IMEI status was NG. While the IMEI number was ok for both sims. I knw that you have to patch certificates in order to fix the network. I didn't have the tools so i got it fixed from a shop.
Now i want to know a few things.
1) can i somehow update the firmware without having to go through all the root process and having to patch certificate ??
I found this video where this guy patched the AP file with magisk manager and just flashed the files via odin ??
will this method work with note 9 ?? and do i need to do any other extra steps ?? i also read about fireflash in the S7 forum, will that method work ??
2) if i backup this rom and incase i get a IMEI NG problem will i be able to just restore the rom ?? or will i have to patch the certificates again ??
3) is there any other workaround of patching certificate ?? are there patched modems available for note 9 ??? can i backup certificates ?? is there a permanent solution to this ??
4) which is the best tool to patch certificate ?? chimera ?? Z3X?? or any other ?? and do they support the latest android 10 security patch ??
Thanks

I'm facing Same problem n960f and set of questions.

snanahmd said:
Hello,
I need help and guidance on some things regarding N960F/DS.
My phone was rooted with magisk on android pie, so when i flashed the android 10 Q rom via odin and everything was fine except i didn't have any network and my IMEI status was NG. While the IMEI number was ok for both sims. I knw that you have to patch certificates in order to fix the network. I didn't have the tools so i got it fixed from a shop.
Now i want to know a few things.
1) can i somehow update the firmware without having to go through all the root process and having to patch certificate ??
I found this video where this guy patched the AP file with magisk manager and just flashed the files via odin ??
will this method work with note 9 ?? and do i need to do any other extra steps ?? i also read about fireflash in the S7 forum, will that method work ??
2) if i backup this rom and incase i get a IMEI NG problem will i be able to just restore the rom ?? or will i have to patch the certificates again ??
3) is there any other workaround of patching certificate ?? are there patched modems available for note 9 ??? can i backup certificates ?? is there a permanent solution to this ??
4) which is the best tool to patch certificate ?? chimera ?? Z3X?? or any other ?? and do they support the latest android 10 security patch ??
Thanks
Click to expand...
Click to collapse
Have you got any answer to those questions yet? I have same phone and same questions.

s
oqaab said:
Have you got any answer to those questions yet? I have same phone and same questions.
Click to expand...
Click to collapse
Same here!?

Related

[Q&A] [GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat

[Q&A] [GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat
Q&A for [GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
guys please help me out.
i've unlock the bootloader of my H30-U10 ,after that when i install the new custom rom the phone doesnt launch anymore....no pulse of vibration or screen light.....when i connect it to pc actually windows doesnt detect it at all methods not fastboot mode or flashmode or....... .... my phone doesnt start at all
plz plz plz plz help
Plz help me my honor 3c doesnt launch at all with no pulse of vibration
guys please help me out.plz plz plz :crying:
i've unlock the bootloader of my H30-U10 ,after that when i install the new custom rom [6pack by flufy tendo] with TWRP recovery.... the phone doesnt launch anymore....no pulse of vibration or screen light.....when i connect it to pc actually windows doesnt detect it at all methods not fastboot mode or flashmode or....... .... my phone doesnt start at all
plz plz plz plz help :crying: :crying: :crying:
Huawei Honor 3C
My phone not recharging
can I get the circuit diagram for Huawei Honor 3C
http://forum.xda-developers.com/showthread.php?t=2910441
hi i new twrap cant load sdcard and i dont flah modem patch i move this faile to internal memory and instal modem patch but not work gaps please help me to finde a recovery
tanks tanks
New build number 4.10.16
@codelover, LIve recovery not working with New build number 4.10.16. Pls help
Cannot boot to recovery after flash k.k based
Hi there,
I had flashed K.K based with emui2.3 from previousB115 international set with unlock bootloader.
after flashed the new K.K rom and flashed CWM carliv, then try boot to recovery to wipe data, but why nothing's happen? it stuck on 1st honor logo and can't boot to recovery
something's going wrong with my steps?
please help, i want to wipe data then root the K.K based
both confirmed here wih ver. 4.10.16,LiveTWRP seems not to be working anymore
here is the log file
thanks
Restore ROM for Honor 3C (H30-U10) to Stock JB Firmware (V100R001C900B110)
Respectable Sir,
My Dad's Honor 3c LCD had some hardware issue to troubleshoot i tried to upgrade to KITKat but the problems with the screen was persistent, i sent it to the service center but they said the warranty is void unless i restore it to the stock version (Picture for the version i need to restore is attached).
1. I restored back to Honor 3C (H30-U10) to B108 Stock JB Firmware (V100R001C900B108) but they said i need to restore back to the version it came in ...
2. " Honor 3C (H30-U10) to JB Firmware (V100R001C900B110) THIS IS THE FIRMWARE VERSION I NEED BUT I CANT FIND IT ANYWHERE "
Kindly treat my email as an SOS .
yasan1367 said:
hi i new twrap cant load sdcard and i dont flah modem patch i move this faile to internal memory and instal modem patch but not work gaps please help me to finde a recovery
tanks tanks
Click to expand...
Click to collapse
ModemFix can't be use to get IMEIs back in B108, it was made for EMUI 2.3 dev.
horlaworey said:
@codelover, LIve recovery not working with New build number 4.10.16. Pls help
Click to expand...
Click to collapse
Yes, indeed, LiveTWRP will no longer work on newer builds, i am afraid you will need to flash the recovery to device if you want to use it.
After all, the 'Live' version is a bonus, and without source i have no idea what they did that caused it failed to boot.
Rayquaza said:
I had flashed K.K based with emui2.3 from previousB115 international set with unlock bootloader.
after flashed the new K.K rom and flashed CWM carliv, then try boot to recovery to wipe data, but why nothing's happen? it stuck on 1st honor logo and can't boot to recovery
something's going wrong with my steps?
please help, i want to wipe data then root the K.K based
Click to expand...
Click to collapse
Hi, please refer to the main guide for updated button sequence to be used to boot recovery. (Will be updated shortly)
elysianz said:
both confirmed here wih ver. 4.10.16,LiveTWRP seems not to be working anymore
here is the log file
Click to expand...
Click to collapse
Live TWRP part confirmed, it can no longer be used with newer EMUI version.
For sdcard problem, can you confirm your device is H3C H30-U10? Not H3W or other variant? Intl. or China set?
I would suggest you to try the following:
1) Reset TWRP settings
2) Try other SD card, different brand if possible.
3) Smaller storage size, eg: If you are using 16GB now, try one with lower size like 8GB, 4GB.
4) Format the SD card with android, remove any extra feature such as sdcard encryption.
adeelahmad967 said:
1. I restored back to Honor 3C (H30-U10) to B108 Stock JB Firmware (V100R001C900B108) but they said i need to restore back to the version it came in ...
2. " Honor 3C (H30-U10) to JB Firmware (V100R001C900B110) THIS IS THE FIRMWARE VERSION I NEED BUT I CANT FIND IT ANYWHERE ".
Click to expand...
Click to collapse
I believed you have it connected to internet and checked for update and there is no OTA available for your device, correct?
Unfortunely HW has removed the download link for B110, i do not have any backup for B110 either, i didn't download it earlier.
For now i think what you can do it ask your friend or some else with B110 to do a TWRP backup and use the backup to restore.
You need to restore /system & /cust partitions only, once you have done that do a factory data reset from a booted system.
I wish i could help more but i have the slowest internet on the planet so nothing i can do here.
EDIT:
xperia_rebel said:
@codelover bro , I think I have.... Confirm whether the B110 international version would be fine
Click to expand...
Click to collapse
TWRP B110 backup from your country? Yea, that would be fine too, but if you have the B110 UPDATE.APP that would be better.
I am not sure if B108 locked BL could survive TWRP restore without first soft-bricking it, i didn't try that, or i tried but forgot ...
codelover said:
ModemFix can't be use to get IMEIs back in B108, it was made for EMUI 2.3 dev.
Yes, indeed, LiveTWRP will no longer work on newer builds, i am afraid you will need to flash the recovery to device if you want to use it.
After all, the 'Live' version is a bonus, and without source i have no idea what they did that caused it failed to boot.
Hi, please refer to the main guide for updated button sequence to be used to boot recovery. (Will be updated shortly)
Live TWRP part confirmed, it can no longer be used with newer EMUI version.
For sdcard problem, can you confirm your device is H3C H30-U10? Not H3W or other variant? Intl. or China set?
I would suggest you to try the following:
1) Reset TWRP settings
2) Try other SD card, different brand if possible.
3) Format the SD card with android, remove any extra feature such as encryption.
I believed you have it connected to internet and checked for update and there is no OTA available for your device, correct?
Unfortunely HW has removed the download link for B110, i do not have any backup for B110 either, i didn't download it earlier.
For now i think what you can do it ask your friend or some else with B110 to do a TWRP backup and use the backup to restore.
You need to restore /system & /cust partitions only, once you have done that do a factory data reset from a booted system.
I wish i could help more but i have the slowest internet on the planet so nothing i can do here.
Click to expand...
Click to collapse
@codelover bro , I think I have.... Confirm whether the B110 international version would be fine
Sent from my H30-U10
yes bro b11o is what i need
yes Bro B110 international will be a huge help .
asking for help
- Phone model: h30-u10
- Phone Version: international boot unlocked
- Initial Build Number: v100r001c900b110
- Last Build Number: v100r001c900b110
- Current Status: bootloop logo
- Problem/Question:unable to use xposed installer
my mobile is rooted successfully i tried all the versions of xposed installer all failed to install framework on my mobile it seems as if there is not enough permission on file system even root explorer unable to delete any file system
Zip instalation failed
Hi there,
I have follow the steps to flash emui 3.0 beta using TWRP, but the installation failed.
Any suggestion?
Thanks a lot
hi ,
just because of your guide, i was able to get back my honor 3c from soft brick to original international B115 image. thanks a lot for supporting.
@codelover
I had checked all steps you've been explained, but it goes failed when i flashed the rom through TWRP
anyway, I'll try your suggestion later, because i had flashed Emui 2.3 currently.
By the way, i had root emui 2.3 and verify by root checker, but i had problem with busybox. I cannot install it.
my system memory remains 34mb, does the memory space too small to instal busybox?
Help please
Hello! I downloaded the firmware EMUI2.3_H30-U10_4.9.1 and did everything you wrote, but after extracting the firmware by HuaweiUpdateExtractor_0.9.8.0 I did found in the folder the file '_PrepareFiles.exe' (item 13 of your post)! What is wrong? Thank you!!!
suggestion
dear sir,
it is great to have your guide with me, i just wanted to make a suggestion, at the point where you have summarize the steps for installing kit kat on international hand sets, please write an instruction that all international users must have unlocked their phones, before rom update, so after upgrading they could run live TWRP easily.
Thanks and regards once again.
Hello! I downloaded the firmware EMUI2.3_H30-U10_4.9.1 to flash the phone by Flash Tool. According the guide "Restoring Official Stock ROM using SPFT" (http://forum.xda-developers.com/show...809&postcount=) after extracting the firmware by HuaweiUpdateExtractor_0.9.8.0 the file "_PrepareFiles.exe" must be appear in the folder with extracted firmware. But in my case when I extracted the file "update.app" I did'nt find the file "_PrepareFiles.exe" in the folder (((( What is wrong? The NET.framework v.4.5.1. is instastalled. Thank you!

G925A - Root 6.0.1

Hi guys, Tested and worked on
Model : G925A
Build number : MMB29K.G925AUCS5DPJ1
Baseband Version : G925AUCS5DPJ1
Android Version : 6.0.1
If you want my firmware you can find it here
Flash Via Odin.
If dont work for you than when i have time i will modify to work for you you send me build and baseband than we will see.
PS : I dont take any responsibility for anything.
If i help you just hit thanks nothing more.
has anyone try this?
No funciona
No funciona yo lo prbe y mi telefono no encendio mas.
MOD EDIT:
Per the forum rules, all posts must be made in the English language.
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
zogu said:
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
Click to expand...
Click to collapse
How did you do ? i can not use adb
zogu said:
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
Click to expand...
Click to collapse
@zogu what do you mean using adb? Can you describe your step? Here what I try but still cannot root the phone.
1. Odin @diart firmware
2. Odin diar-uca_root.zip
3. Recovery mode & adb sideload supersu, both fail (verification blablabla issue)
I got same "unauthorized actions has been detected" notice like you, but fail to add root with chainfire supersu. Trying all one click root fail too. Can you help to describe your step?
noestradamus said:
@zogu what do you mean using adb? Can you describe your step? Here what I try but still cannot root the phone.
1. Odin @diart firmware
2. Odin diar-uca_root.zip
3. Recovery mode & adb sideload supersu, both fail (verification blablabla issue)
I got same "unauthorized actions has been detected" notice like you, but fail to add root with chainfire supersu. Trying all one click root fail too. Can you help to describe your step?
Click to expand...
Click to collapse
hi, well he want to say to use fourious gold chimera i use it and it workd but it workd with trying a lot with wondershare,kingroot some root that i found until you find the precise time to use it because the patch image is to let your device take some more libs and others via program you dont have a restriction and without patch you have restriction so in my case i use chimera and and it worked hmm i have bad english sory try it one more time if no contact with one that worked my method like zogu ask him he can help you out.
zogu said:
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
Click to expand...
Click to collapse
hello, i am glad that helped you can you tell the others how you do that which program they are having problems with that, thank you
caastab said:
No funciona yo lo prbe y mi telefono no encendio mas.
Click to expand...
Click to collapse
english and it work you just havr to work with it to work my friend
adh1907 said:
How did you do ? i can not use adb
Click to expand...
Click to collapse
ehy you cant use it ? he mean to root with program that are like kingo root
@diart can you make flashable g925f bootloader for g925a? I want to install twrp and then check all nice international roms (even lineage is coming to our devices), but with this at&t bootloader this can never be possible....
zogu said:
@diart can you make flashable g925f bootloader for g925a? I want to install twrp and then check all nice international roms (even lineage is coming to our devices), but with this at&t bootloader this can never be possible....
Click to expand...
Click to collapse
well i try out but i dont own that device anymore i work on mobilshop so when a device like that come here i try it i needet root so i made it and i post it but i will try i need someone to test them without device i work blind
diart said:
hi, well he want to say to use fourious gold chimera i use it and it workd but it workd with trying a lot with wondershare,kingroot some root that i found until you find the precise time to use it because the patch image is to let your device take some more libs and others via program you dont have a restriction and without patch you have restriction so in my case i use chimera and and it worked hmm i have bad english sory try it one more time if no contact with one that worked my method like zogu ask him he can help you out.
Click to expand...
Click to collapse
Ah, ic.
Still cannot root my phone even with other rooting tools (not try furious gold chimera yet, doesn't have it). But thanks for you @diart & @zogu anyway. you two give us hope that there's any possibility to root our AT&T S6 Edge phone.
Can someone tell me how to do it, please?
Boot image from first post is engineering boot image and it should works with all 6.0 firmwares.
I'm new to samsung, but i read that with this image is possible to remount system rw. Well on AT&T is impossible.
It is impossible to root phone with this image, but we can do a lot of useful things using adb, disable aps with pm disable, we have full access to data partition, making backups etc...
Actually i don't need root at all, i hate branding (specially if that includes some services, like at&t mail, phonebook...) on any device and i want to change firmware to some international.
All this is maybe possible with eng sboot. There is online available for 12 usd and this is not expensive, but i'm still not shure will i be able to change sboot to 925f.
Theoretically it should boot any kernel and recovery without even tripping knox, and maybe with this image is possible to install twrp, kernel, root and everything else. But also sometimes everything does not work (i read that with eng sboot fingerprint sensor does not work, it probably skip keys reading, without keys no fingerprint).
If someone is able to get sboot pj1 or pf1, please send me PM
P.S. One good thing with this eng boot is that my network selection menu has much more bands, even when i restored stock kernel. Don;t konow how, but it is there
diart said:
Hi guys, Tested and worked on
Model : G925A
Build number : MMB29K.G925AUCS5DPJ1
Baseband Version : G925AUCS5DPJ1
Android Version : 6.0.1
If you want my firmware you can find it here
Flash Via Odin.
If dont work for you than when i have time i will modify to work for you you send me build and baseband than we will see.
PS : I dont take any responsibility for anything.
If i help you just hit thanks nothing more.
Click to expand...
Click to collapse
my friend im flashing this file but odin md5 error binary is invalid ? how to fix ?
Just rename from md5 to tar. File name should be sm-g925a_uca_601.tar, flash it using odin (AP) and that's it.
zogu said:
Boot image from first post is engineering boot image and it should works with all 6.0 firmwares.
I'm new to samsung, but i read that with this image is possible to remount system rw. Well on AT&T is impossible.
It is impossible to root phone with this image, but we can do a lot of useful things using adb, disable aps with pm disable, we have full access to data partition, making backups etc...
Actually i don't need root at all, i hate branding (specially if that includes some services, like at&t mail, phonebook...) on any device and i want to change firmware to some international.
All this is maybe possible with eng sboot. There is online available for 12 usd and this is not expensive, but i'm still not shure will i be able to change sboot to 925f.
Theoretically it should boot any kernel and recovery without even tripping knox, and maybe with this image is possible to install twrp, kernel, root and everything else. But also sometimes everything does not work (i read that with eng sboot fingerprint sensor does not work, it probably skip keys reading, without keys no fingerprint).
If someone is able to get sboot pj1 or pf1, please send me PM
P.S. One good thing with this eng boot is that my network selection menu has much more bands, even when i restored stock kernel. Don;t konow how, but it is there
Click to expand...
Click to collapse
you need g925A pj1 or pf1 sboot ?
Engineering sboot pj1.
Thanks
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Prashanth
Build number: G925AUCUBOI2, can i root any other build number stock firmware to get updated with marshmallow. because with build number last update was lollipop 5.1.1, please help me with once. i want my S6 Edge with Marshmallow. this S6 edge is using in India was taken from USA At&T unlocked.

Huawei P9 - Android 6 to 7 Firmware

Hi all,
Ive been a fair while out of flashing ROMs since Note 4 Edge / HTC M7 and have today unlocked bootloader and rooted my P9.
It is currently Australian Vodafone release EVA-L09CC346B160 (Android 6) but I want Nougat.
There is no local carrier updates available but I understand that there is Android 7 available in Australia on 'international' branded handsets.
How can I identify what this firmware is for international Nougat? Can some one assist me. Or can someone advise what would be a suitable equivalent firmware that I can use in place of.
I am unsure how this device goes in flashing ROMs of higher or lower android versions on the current firmware and dont really want to brick it.
Thanks for any tips / suggestions
Umm, just found a thread mentioning L09C636B361 - will check this out, but is there any more recent? And still how does fl;ashing other premade ROMs on 7 go on top of the current Android 6 firmware go?.. Ta
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
using this guide you can update to the latest nougat release
Thank yuo Xtcislove
I have completed the steps suggested and now have Nougat. Though it is a newer version being .383 which was updated via OTA to .378 and then zip to .383.
Thank you for the help
I'm trying to flash firmware on my P9, now I have EVA-L09C40B181, but it stuck on 5% and HiSuite shows Recovery failed! I tried custom firmware, same problem. What can I do ?
Dfani511 - just follow the instructions in the thread provided by Xtcislove, it works but took me a long time.
I found the steps concerning the update to be added in dload was a little not clear, in the update zip that's downloaded, you need to open it until you get the dload folder, extract that and copy to the SD card.
Throughout my updating, o never ended up on the firmware you have
This N seems to be working fine, nicer looking.
I do have 1 issue, no matter what I do I can not get root to work. I'm on .383, can this one be rooted or not currently? If it can, how do I root .383? I have TWRP 3.1.0.3 as current recovery..
Or, is that ok to flash on my current P9 L09C432B383 ? from this thread - https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
twerg said:
This N seems to be working fine, nicer looking.
I do have 1 issue, no matter what I do I can not get root to work. I'm on .383, can this one be rooted or not currently? If it can, how do I root .383? I have TWRP 3.1.0.3 as current recovery..
Or, is that ok to flash on my current P9 L09C432B383 ? from this thread - https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
Click to expand...
Click to collapse
This is what I did to root my Huawei P9 on Nougat L09C432B383:
Use the SuperSU-v.27.9-201612051815EMUI5.0.zip file flash via custom recovery and it should root your device no problem.
twerg said:
This N seems to be working fine, nicer looking.
I do have 1 issue, no matter what I do I can not get root to work. I'm on .383, can this one be rooted or not currently? If it can, how do I root .383? I have TWRP 3.1.0.3 as current recovery..
Or, is that ok to flash on my current P9 L09C432B383 ? from this thread - https://forum.xda-developers.com/p9/development/root-pre-rooted-boot-img-p9-nougat-b378-t3574548
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
Click to expand...
Click to collapse
Use this
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
xtcislove said:
Use this
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
Click to expand...
Click to collapse
Hey xtcislove - is there a preferred version? 1, 2 or 3 do you recommend? Thanks mate
--------------
EDIT - Nevermind, Xtcislove, your the best man, appreciate your help with your guides etc. I went with option 1 and the handset is now rooted on Nougat. Thanks so much
twerg said:
Hey xtcislove - is there a preferred version? 1, 2 or 3 do you recommend? Thanks mate
--------------
EDIT - Nevermind, Xtcislove, your the best man, appreciate your help with your guides etc. I went with option 1 and the handset is now rooted on Nougat. Thanks so much
Click to expand...
Click to collapse
3 is the version i preffer, you cant freeze apps with v1 but most things should work fine.
btw you can flash v3 over v1.
Ive flashed v3 over 1 and all appears good, root working fine. Thanks again.
Though I have noticed on both v1 and v3 that SuperSU binary needs to be updated, ob both v1 and v3. The phone fails to update both, states unsuccessful and to reboot, which also does not update the binary.
Only other thing I have done is to get BusyBox.
What can be done about the failing binary update? Will it be fine to leave as is, just getting rid of the prompt when it appears, or does it really need to have the update done sometime?

Pixel Platform / Huawei P Smart 2018 / 14th April 2019

Pixel platform​OEM software redesigned to be closer towards Android's default interface with inspiration from Pixel​
Huawei P Smart 2018 - FIG-LX1​ Models supported​ C432 | C782 | C106
Pixel platform for the Huawei P Smart is a version of Huawei's EMUI based on Android 8.0 that has been modified to look and feel more like a pure Android/Pixel experience by:
replacing the default EMUI skin with a custom skin created by Livitech specifically for EMUI 8.0 that resembles Android 9.0
removing 98% of Huawei applications and replacing them with Google alternatives
Adding extra Google apps such as Wallpapers and Live wallpapers
Usually switching to a custom ROM to get a more pure Android or pixel like experience means sacrificing optimisations made by the manufacturer for your device ranging from display drivers to camera sensors, by building on top of the default OEM software all of this is kept:
The default Camera app so you don't miss a shot
Device specific features like double touch to turn screen on/off
Battery life settings tuned for your device
Best performance to provide efficient and fast work​
Latest version
Pixel platform: 2.4.1
Released: April 14th 2019
If you are not running Pixel Platform then follow instructions on this page
Instructions
If you are running Pixel Platform 2.3.x then follow update instructions on this page
Instructions
If you are running Pixel platform 2.4 already then there is no need to update​
Learn more​
cool !! so how do we install this??
looks interesting ..gonna give it a shot ...just a question ..womt replacing stock gallery cause problems with intergrated camera functions
Hello! Could you please provide some install instructions? Can it be installed on a device that hasn't been unlocked yet. Thanks
the download is 2GB so I'm pretty certain it is a stock system.img file that you can flash with .img compatible recovery or with fastboot ...
you would need to be on stock ...unrooted ...i imagine if you are rooted you should flash stock boot.img and then flash system ..then reflash magisk if you want root ..
I'm just guessing here since I haven't downloaded it yet cos 2GB is big and I'm already on stock rooted that I modded myself using magisk & twrp ...
i think he too a stock system.img that he made the modifications he lists ..
problem is he should indicate build number and security patch so people can ensure they are on the same security patch EDIT HE LISTS JANUARY , radio ( baseband) , region , build number to avoid problems with imei or cellular reception or boot looping due to a newer version of stock rom installed ...
the OP doesn't say much though and his website looks a site where he sells IT services ...
KevMetal said:
the download is 2GB so I'm pretty certain it is a stock system.img file that you can flash with .img compatible recovery or with fastboot ...
you would need to be on stock ...unrooted ...i imagine if you are rooted you should flash stock boot.img and then flash system ..then reflash magisk if you want root ..
I'm just guessing here since I haven't downloaded it yet cos 2GB is big and I'm already on stock rooted that I modded myself using magisk & twrp ...
i think he too a stock system.img that he made the modifications he lists ..
problem is he should indicate build number and security patch so people can ensure they are on the same security patch EDIT HE LISTS JANUARY , radio ( baseband) , region , build number to avoid problems with imei or cellular reception or boot looping due to a newer version of stock rom installed ...
the OP doesn't say much though and his website looks a site where he sells IT services ...
Click to expand...
Click to collapse
Download zip file and flash with TWRP
KevMetal said:
the download is 2GB so I'm pretty certain it is a stock system.img file that you can flash with .img compatible recovery or with fastboot ...
you would need to be on stock ...unrooted ...i imagine if you are rooted you should flash stock boot.img and then flash system ..then reflash magisk if you want root ..
I'm just guessing here since I haven't downloaded it yet cos 2GB is big and I'm already on stock rooted that I modded myself using magisk & twrp ...
i think he too a stock system.img that he made the modifications he lists ..
problem is he should indicate build number and security patch so people can ensure they are on the same security patch EDIT HE LISTS JANUARY , radio ( baseband) , region , build number to avoid problems with imei or cellular reception or boot looping due to a newer version of stock rom installed ...
the OP doesn't say much though and his website looks a site where he sells IT services ...
Click to expand...
Click to collapse
Download EMUI Pixelized from bottom of website
www.livitech-development.co.uk/pixelized-platform-huawei
Flash file with TWRP
Bootloader must be unlocked
Models supported are C782, C432, C16B
No need to format or erase data as the TWRP zip file does it for you without deleting content on internal storage
Security patch ( Google ) is January 2019
Kernel security patches do not change as TWRP does not like the kernel IMG being flashed through a zip file otherwise I would have included an updated kernel as well.
The only two partitions on the phone changed are
/System
/Version
These two partitions do not cause any problems with basebands, region, IMEI numbers since the files and coding are in their own separate partitions
KevMetal said:
looks interesting ..gonna give it a shot ...just a question ..womt replacing stock gallery cause problems with intergrated camera functions
Click to expand...
Click to collapse
Download EMUI Pixelized from bottom of website
www.livitech-development.co.uk/pixelized-platform-huawei
Flash file with TWRP
Bootloader must be unlocked
Models supported are C782, C432, C16B
lfom said:
Hello! Could you please provide some install instructions? Can it be installed on a device that hasn't been unlocked yet. Thanks
Click to expand...
Click to collapse
Download EMUI Pixelized from bottom of website
www.livitech-development.co.uk/pixelized-platform-huawei
Flash file with TWRP
Bootloader must be unlocked
Models supported are C782, C432, C16B
No need to format or erase data as the TWRP zip file does it for you without deleting content on internal storage
Security patch ( Google ) is January 2019
Kernel security patches do not change as TWRP does not like the kernel IMG being flashed through a zip file otherwise I would have included an updated kernel as well.
The only two partitions on the phone changed are
/System
/Version
These two partitions do not cause any problems with basebands, region, IMEI numbers since the files and coding are in their own separate partitions
going to try this and give feedback soon
installed succesfully and have not experinced any issues so far, but the system is prerooted.
so don't use if you don't want root.
enjac said:
going to try this and give feedback soon
installed succesfully and have not experinced any issues so far, but the system is prerooted.
so don't use if you don't want root.
Click to expand...
Click to collapse
Could you take a screenshot of the:
Homescreen
App drawer
Lockscreen
Thanks, just want to confirm it is working as it should
The rooted problem is due to Huawei not giving the option to decrypt the phone in the settings
If I try with encrypted folders, everything doesn't install as it should
Livi-Tech said:
Could you take a screenshot of the:
Homescreen
App drawer
Lockscreen
Thanks, just want to confirm it is working as it should
The rooted problem is due to Huawei not giving the option to decrypt the phone in the settings
If I try with encrypted folders, everything doesn't install as it should
Click to expand...
Click to collapse
sorry am back to stock
enjac said:
sorry am back to stock
Click to expand...
Click to collapse
Okay
Was magazine unlock working ( changing lockscreen wallpaper )
And was pixel launcher ( homescreen ) working?
Livi-Tech said:
Okay
Was magazine unlock working ( changing lockscreen wallpaper )
And was pixel launcher ( homescreen ) working?
Click to expand...
Click to collapse
everything was fine. only changed to stock because of root,
you did a great job :good:
enjac said:
everything was fine. only changed to stock because of root,
you did a great job :good:
Click to expand...
Click to collapse
i'm looking into a way around the root issue
This software was ready 6 months ago under the name EMUI-Pixelized
The reason it was pulled/discontinued was because I created the software on the C782 model P smart so when flashed on another model
the Wallpaper would reset
Google apps would get removed
Pixel launcher would switch back to EMUI's launcher
Working with this user who had the C432 model for the first half of those 6 months we were able to find the files responsible for these compatibility issues, The second half of those 6 months, this user had been given 3 updates to update security patches ( all created from scratch ) and the compatibility issue is no longer anywhere to be found and is confirmed working for C782, C432 and my cousin has the C16B model which also works
If another model was to be added, in the past the software had to be recreated from scratch but certain modifications were made to allow new model support to only require a small change to one file ( other models apart from C782, C432 and C16B should still work anyway without needing to have official support added )
Livi-Tech said:
i'm looking into a way around the root issue
This software was ready 6 months ago under the name EMUI-Pixelized
The reason it was pulled/discontinued was because I created the software on the C782 model P smart so when flashed on another model
the Wallpaper would reset
Google apps would get removed
Pixel launcher would switch back to EMUI's launcher
Working with this user who had the C432 model for the first half of those 6 months we were able to find the files responsible for these compatibility issues, The second half of those 6 months, this user had been given 3 updates to update security patches ( all created from scratch ) and the compatibility issue is no longer anywhere to be found and is confirmed working for C782, C432 and my cousin has the C16B model which also works
If another model was to be added, in the past the software had to be recreated from scratch but certain modifications were made to allow new model support to only require a small change to one file ( other models apart from C782, C432 and C16B should still work anyway without needing to have official support added )
Click to expand...
Click to collapse
would be glad to have this Rom witout root. hope you find a way to fix it.looking forward to next update. :good:
enjac said:
would be glad to have this Rom witout root. hope you find a way to fix it.looking forward to next update. :good:
Click to expand...
Click to collapse
i've had a look into it, The device isn't actually rooted like I suspected ( I got a 2nd opinion ) the message pops up when the boot file has been modified ( even if decompiled and recompiled with no actual modifications )
The boot file is modified by the decrypt.zip file to prevent files on phone storage getting encrypted
When I was updating to a newer version of this software before or switching from full stock EMUI, all my folders and file would encrypt and become random letters and numbers making accessing them impossible
Currently looking into a way around this
enjac said:
would be glad to have this Rom witout root. hope you find a way to fix it.looking forward to next update. :good:
Click to expand...
Click to collapse
Found the root issue and fixed it
Phone isn't actually rooted like I suspected
Huawei looks for a certain line of code in the /version partition
If this line is taken out then Huawei's services detect the phone as modified
Issue is no longer appearing and currently rebuilding the software with the fix intact
Livi-Tech said:
Found the root issue and fixed it
Phone isn't actually rooted like I suspected
Huawei looks for a certain line of code in the /version partition
If this line is taken out then Huawei's services detect the phone as modified
Issue is no longer appearing and currently rebuilding the software with the fix intact
Click to expand...
Click to collapse
Yeah good to know . Waiting for the update
enjac said:
Yeah good to know . Waiting for the update
Click to expand...
Click to collapse
Here you go
https://drive.google.com/file/d/1VRm0aUgdwtjk_TQxLhxbMoYCvhrWIs7S/view?usp=sharing
Backup any important files on internal storage
Flash TWRP
Install rom
Install decrypt.zip file ( placed in internal storage after installing rom )
Wipe internal storage
Reboot

Rooting redmi 9 eea version with magisk without twrp

I've been trying to root my redmi9 for a couple of days now, with no luck. Downloaded the relevant firmware for my version to my pc, extracted it and copied the boot img over to my phone and copied over magisk manager APK too. On my phone I opened and installed magisk manager and proceeded to the install process then selected patch file and clicked install. Unfortunately each time that I do this I get the same outcome the message reads-
-Device platform: arm64-v8a
-Copying images to cache
! Process error
! Installation failed
I've uninstalled magisk and reinstalled, with the same outcome. Then I've downloaded my phone's firmware directly to my phone and tried to patch the boot IMG like that, but exactly the same outcome. Re-checked that I have the correct firmware for my version and it is, so I can't really understand what is going wrong and why I can't select a patch to send back to pc? Points of note, I haven't got my sim inserted and wondered if this could be a problem as I can't select the other two debugging settings on my phone without my sim inserted ( install via USB and usb debugging (security settings) options) but USB debugging is selected to on. My miui version is Miui global 11.0.7 stable 11.0.7.0(QJCEUXM)
If any body has an already patched IMG file that I can use, or can help me achieve this myself it would be very much appreciated.
Philtyj said:
I've been trying to root my redmi9 for a couple of days now, with no luck. Downloaded the relevant firmware for my version to my pc, extracted it and copied the boot img over to my phone and copied over magisk manager APK too. On my phone I opened and installed magisk manager and proceeded to the install process then selected patch file and clicked install. Unfortunately each time that I do this I get the same outcome the message reads-
-Device platform: arm64-v8a
-Copying images to cache
! Process error
! Installation failed
I've uninstalled magisk and reinstalled, with the same outcome. Then I've downloaded my phone's firmware directly to my phone and tried to patch the boot IMG like that, but exactly the same outcome. Re-checked that I have the correct firmware for my version and it is, so I can't really understand what is going wrong and why I can't select a patch to send back to pc? Points of note, I haven't got my sim inserted and wondered if this could be a problem as I can't select the other two debugging settings on my phone without my sim inserted ( install via USB and usb debugging (security settings) options) but USB debugging is selected to on. My miui version is Miui global 11.0.7 stable 11.0.7.0(QJCEUXM)
If any body has an already patched IMG file that I can use, or can help me achieve this myself it would be very much appreciated.
Click to expand...
Click to collapse
New version of magisk has this error.if you have another phone then you use it to patch your boot.img..it will work...I am also doing this...for a unknown error magisk manager cannot patch boot.img in redmi 9....then I try to patch my boot.img on another phone and it can patch....follow the link.....
https://forum.xda-developers.com/showpost.php?p=83419803&postcount=1
Hi, thanks for the reply. I'm not fully understanding what you're saying. How do I do this using another phone? Do I download magisk onto my other phone, then copy the boot IMG to the phone and patch the image? Then send the patch back to my pc to then flash the patch onto my redmi 9 via fastboot?
In your link, are these steps to follow to flash my redmi9 after creating the patch on my other phone?
Sorry for all of the questions, I'm new to this, it's my first attempt to root a phone and it seems that I've picked the hardest one to unlock and root!!
Philtyj said:
Hi, thanks for the reply. I'm not fully understanding what you're saying. How do I do this using another phone? Do I download magisk onto my other phone, then copy the boot IMG to the phone and patch the image? Then send the patch back to my pc to then flash the patch onto my redmi 9 via fastboot?
In your link, are these steps to follow to flash my redmi9 after creating the patch on my other phone?
Sorry for all of the questions, I'm new to this, it's my first attempt to root a phone and it seems that I've picked the hardest one to unlock and root!!
Click to expand...
Click to collapse
Yes...you can use any device to patch your boot.img file...there is no problem to do so....you can patch any boot.img in any device.....this new version of magisk manager has some issue with our redmi 9 ..so use another device and patch it..then flash patched boot.img via fastboot and follow the tutorial which I give you....
Shas45558 said:
Yes...you can use any device to patch your boot.img file...there is no problem to do so....you can patch any boot.img in any device.....this new version of magisk manager has some issue with our redmi 9 ..so use another device and patch it..then flash patched boot.img via fastboot and follow the tutorial which I give you....
Click to expand...
Click to collapse
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Philtyj said:
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Click to expand...
Click to collapse
You do not need to install any custom ROM your stock ROM is ok. But you can try the gsi ROM...
Follow the link you can install GSI without any problem...
https://forum.xda-developers.com/showpost.php?p=83533901&postcount=1
EEA version have call recorder or not? i try global version not have call recorder
adiyanto said:
EEA version have call recorder or not? i try global version not have call recorder
Click to expand...
Click to collapse
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
aasiaasi said:
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
Click to expand...
Click to collapse
maybe u can try Indonesia version. this version have call recorder. but i need for recorder my whatsapp phone.... ill try Any Call Recorder
aasiaasi said:
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
Click to expand...
Click to collapse
Hi Qasim,
Would you please share the complete process of rooting and new img file restoration as I am new to this redmi9 am using this device in pakistan. Looking forward for your kind response
Regards nauman
Philtyj said:
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Click to expand...
Click to collapse
Can you share your magisk_patched.img ? Cause I tried to patch the image on another device, but the created image boot-loops only
Tried patching the image on the redmi directly, but the resulting patched image is only 10MB and obviously boot-loops.
Thanks.
naumanakram said:
Hi Qasim,
Would you please share the complete process of rooting and new img file restoration as I am new to this redmi9 am using this device in pakistan. Looking forward for your kind response
Regards nauman
Click to expand...
Click to collapse
Dear Nauman,
Greetings !!!
For Rooting Your Device Please Refer To This LINK. Or If You Just Want Call Recording Feature Then Flash Redmi 9 Prime ROM To Your Mobile.
Thanks,
MUHAMMAD Asif Qasim

Categories

Resources