Related
https://drive.google.com/open?id=1QkXY-SdEbkRRj8DXJL2btxLKXkN7fH6g
File is currently uploading (I made this thread in case someone is digging around.
I couldn't install it from TWRP for some reason, kept getting error 1. I went to the stock updater, picked "local install" with this zip file on the root of my storage, then it updated.
Right after updating, but prior to rebooting, I flashed the TWRP Installer as a Magisk Module, rebooted into recovery, and flashed Magisk in there.
I know you can flash Magisk right after an OTA then flash TWRP after it reboots, but if you called my luck bad, you'd be giving me too much credit.
Regardless, file is on it's way to the drive and I hope it was worth the time!
ready for download!
Thanks, I was testing.
---------- Post added at 03:53 AM ---------- Previous post was at 03:16 AM ----------
สุรินทร์ พลโธา said:
Thanks, I was testing.
Click to expand...
Click to collapse
From testing hours than typical usage, better 0.2 overview and notifications improved. The battery cannot be dictated at this time.
I can't install from twrp, too. Same error.
=。= said:
I can't install from twrp, too. Same error.
Click to expand...
Click to collapse
True... It's not possible to install it via TWRP. Maybe it has something to do with Android sec. patch 2019.11.
rage302 said:
True... It's not possible to install it via TWRP. Maybe it has something to do with Android sec. patch 2019.11.
Click to expand...
Click to collapse
I installed through an app system. I tested it now, it's better to use a stable battery enough to say it's saving
aNGERY said:
https://drive.google.com/open?id=1QkXY-SdEbkRRj8DXJL2btxLKXkN7fH6g
File is currently uploading (I made this thread in case someone is digging around.
I couldn't install it from TWRP for some reason, kept getting error 1. I went to the stock updater, picked "local install" with this zip file on the root of my storage, then it updated.
Right after updating, but prior to rebooting, I flashed the TWRP Installer as a Magisk Module, rebooted into recovery, and flashed Magisk in there.
I know you can flash Magisk right after an OTA then flash TWRP after it reboots, but if you called my luck bad, you'd be giving me too much credit.
Regardless, file is on it's way to the drive and I hope it was worth the time!
ready for download!
Click to expand...
Click to collapse
After activating magisk modules my device is not booting. continuously booting to twrp and showing Rescueparty. i had tried magisk untinstaller but nothing happen.
rage302 said:
True... It's not possible to install it via TWRP. Maybe it has something to do with Android sec. patch 2019.11.
Click to expand...
Click to collapse
The only ones that can be installed from TWRP are the ones from Oneplusfirmware webpage. The downloaded ones from Updater app are marked as OTA , thus can only be installed with official updater app due to verification keys and all the stuff.
I'm wondering if there is any advantage to installing the update twice, so that it's on both slots?
This Walkthrough works with me perfectly
Updating from open beta 5 to open Beta 6 successfully
Rooted 20.1 & Twrp 72 no issues
Thanks a lot
1- uninstall Magisk modules.
2- install Oos stable/open beta with Settings > Local upgrade . DON'T reboot! (Must be newer than actual Oos you have installed allready on the phone)
3- open Magisk > downloads. Install TWRP A/B Retention Script. DON'T reboot.
4- go back in Magisk. Touch install. Choose (Install to inactive slot after' OTA)
5- reboot to system.
I was on 10.0.2 stable with Magisk Canary, twrp 3.3.1-72
null0seven said:
1- uninstall Magisk modules.
2- install Oos stable/open beta with Settings > Local upgrade . DON'T reboot! (Must be newer than actual Oos you have installed allready on the phone)
3- open Magisk > downloads. Install TWRP A/B Retention Script. DON'T reboot.
4- go back in Magisk. Touch install. Choose (Install to inactive slot after' OTA)
5- reboot to system.
I was on 10.0.2 stable with Magisk Canary, twrp 3.3.1-72
Click to expand...
Click to collapse
This works like a charm. Just did it to install it to the other slot being slot a. I'm ocd so I like both slots flashed. Easy solution to not being able to flash it in twrp. I'm kind of curious why it won't flash in twrp though. Maybe something to do with the security patch
I'm getting OnePlus cloud storage and OnePlus account login in my settings now. Never had that before. Anyone have this with beta 6?
Account login in settings:
I was able to flash in TWRP using version -74, downloading OB6 using oxygen updater
Gordietm said:
I'm getting OnePlus cloud storage and OnePlus account login in my settings now. Never had that before. Anyone have this with beta 6?
Click to expand...
Click to collapse
Not up at the top but yes can add in through settings.View attachment 4883201
Aporzio said:
Not up at the top but yes can add in through settings.
Click to expand...
Click to collapse
So why do I have in the main settings and others don't?
Gordietm said:
So why do I have in the main settings and others don't?
Click to expand...
Click to collapse
Not really sure
If anybody wants official download link for OB6 Global:
https://otafsg1.h2os.com/patch/amaz...13.W.17_OTA_017_all_1911152150_5b8908ba7b.zip
ZoiraP said:
The only ones that can be installed from TWRP are the ones from Oneplusfirmware webpage. The downloaded ones from Updater app are marked as OTA , thus can only be installed with official updater app due to verification keys and all the stuff.
Click to expand...
Click to collapse
this is the first one i couldn't flash in TWRP
Gordietm said:
So why do I have in the main settings and others don't?
Click to expand...
Click to collapse
I updated from twrp and got the same popup in my settings. Also, xXx has been affected, the debloat doesn't work properly on ob6. Hopefully things will get figured out soon.
Just to match the other threads for issues and discussion :
Official links :
Incremental : https://otafsg1.h2os.com/patch/amaz...OTA_024-025_patch_2003270113_ad17667b654b.zip
Full : https://otafsg1.h2os.com/patch/amaz....25_OTA_025_all_2003270113_4588ebe57af551.zip
Mirror links (AFH) :
Incremental : https://www.androidfilehost.com/?w=files&flid=307735
Full : https://www.androidfilehost.com/?w=files&flid=307737
Oxygen Updater also listing both the incremental update and the full update.
Installing :
For the uninitiated, Download either package and copy it to the root folder of your phone's storage, then go to the following location on your phone :
Settings > System (at the bottom) > System Updates (at the bottom) > Tap on the cog icon on the top right > Tap on local upgrade
The build available in your root folder should be listed, tap that and follow the instructions.
If you are coming from the beta release ring back to the main release ring you will most likely be prompted to wipe your data, ensure you have backed up all data you want to keep beforehand.
If you are upgrading from one release ring build to the next then you may want to clear your cache.
My Android 10 repo :
https://www.androidfilehost.com/?w=files&flid=296897
XDA page updated with official links :
https://www.xda-developers.com/onep...t-pro-5g-oxygenos-updates-march-2020-patches/
(Edit : Fixed the links, helps if you copy it properly :/ )
(Edit : Added official links and re-formatted )
Some users who already received the update previously had reported overheating and higher battery usage, tests on the official forum have shown better benchmark results compared to previous builds, so the heat and battery usage might be caused by this. No confirmation from OnePlus as to whether this was why the update was obviously being delayed.
Post any relevant improvements or reports of heating/battery differences below.
Remember to allow adequate time to gauge any difference in battery usage though.
Would flashing this over Beta 11 wipe my phone? I'm also rooted with TWRP.
Sent from my GM1915 using Tapatalk
How to update from OB11 to STABLE and keeping root and twrp
BACKUP all you want to keep safe.
I was on ob11 with latest Magisk Canary and twrp 3.3.1-79
Update from OB11 to STABLE 10.0.5 :
1- uninstall ALL Magisk modules. Reboot to System.
2- install Oos 10.0.5 stable with Settings > Local upgrade . DON'T reboot!!!
3- open Magisk > Downloads. Install TWRP A/B Retention Script. DON'T reboot!!!
4- back in Magisk. Touch install. Choose (Install to inactive slot after' OTA)
5- reboot to system.
Let the phone start. Mine at first start to twrp then to system.
This CLEAN istalls 10.05. It ERASES apps messages...
Done. Installed over 10.0.4 with TWRP and Magisk. WORKING.
I was hoping to not lose apps and messages.
Sent from my GM1915 using Tapatalk
Hi Guys,
I have downloaded full OTA update 10.0.5 from above link.
Flashed rom using TWRP, flashed TWRP image (3.3.1-79 by mauronofrio), rebooted to recovery and flashed Magisk 20.4.zip file.
After system reboot it is still showing OOS 10.0.4 with january 2020 security patch....
Did the same three times, initially twice with OTA zip file taken from Oxygen Updater later with ROM from this thead, same outcome - still on 10.0.4.
Is there something I'm doing wrong?? Can you please advice.
Thanks...
Yanoosh_GA said:
Hi Guys,
I have downloaded full OTA update 10.0.5 from above link.
Flashed rom using TWRP, flashed TWRP image (3.3.1-79 by mauronofrio), rebooted to recovery and flashed Magisk 20.4.zip file.
After system reboot it is still showing OOS 10.0.4 with january 2020 security patch....
Did the same three times, initially twice with OTA zip file taken from Oxygen Updater later with ROM from this thead, same outcome - still on 10.0.4.
Is there something I'm doing wrong?? Can you please advice.
Thanks...
Click to expand...
Click to collapse
You've only installed on one slot, use TWRP to change the slot and flash rom, TWRP and Magisk again.
Either that or just use TWRP to change the boot slot.
djsubterrain said:
You've only installed on one slot, use TWRP to change the slot and flash rom, TWRP and Magisk again.
Either that or just use TWRP to change the boot slot.
Click to expand...
Click to collapse
Great, changing the boot slot worked. Thanks.:good:
Hi guys, just updated to this 10.0.5, reinstalled twrp, but when starts WiFi won't stay on & network icons are a mess as in aren't showing correctly, would this be due to twrp needing an update as I've tried several versions & same result, returning to stock everything works perfectly again, any help would be great thanks
NHNXDA said:
Hi guys, just updated to this 10.0.5, reinstalled twrp, but when starts WiFi won't stay on & network icons are a mess as in aren't showing correctly, would this be due to twrp needing an update as I've tried several versions & same result, returning to stock everything works perfectly again, any help would be great thanks
Click to expand...
Click to collapse
Remove all Magisk modules first, restart then added it back, it's call recording module!
Up and running with TWRP 3.3.1-79 and Magisk 20.4.
Only one day of usage, so too early to draw conclusions, but I have seen no overheating or high battery drain.
If anything, it actually looks to have improved from 10.0.4:
BTW, SOT was 2h57
Why does this update wipes, makes factory defaults?
BoroZG said:
Why does this update wipes, makes factory defaults?
Click to expand...
Click to collapse
Did you install from Open Beta?
Hirs_E_Fruit said:
Did you install from Open Beta?
Click to expand...
Click to collapse
Yes beta 11.
BoroZG said:
Yes beta 11.
Click to expand...
Click to collapse
That's why
hoseth0711 said:
That's why
Click to expand...
Click to collapse
So, no way to avoid factory reset?
BoroZG said:
So, no way to avoid factory reset?
Click to expand...
Click to collapse
It's a different release ring so no, that's the way it's always been tbh
metzo32 said:
Remove all Magisk modules first, restart then added it back, it's call recording module!
Click to expand...
Click to collapse
Its the idiot, being me, I was using the wrong command line for twrp, instead of boot, I used flash boot, which of course flashed twrp as my boot.img & messed it up, I blame covid & isolation, realistically it was my silliness.
Flashed on T-Mobile 7pro, then xXx, no issues so far, great battery life.
Changelog
System
• Brand new UI design brings light and fluid experience
• Updated to Android 10
Instructions
• Download the appropriate package - OnePlus 5
• Open the File Manager and move the downloaded .zip package from the Downloads folder to the root directory.
• Open Settings - System - System updates, press the cogwheel on the top right corner, choose the Local upgrade option, and select the rollback file.
Users who are still on OBT builds for 5/5T can update to this build only via update from recovery. For those, PLEASE NOTE, your entire data will be wiped.
• Turn off the device -> Press power and volume up key simultaneously until the device enters the Fastboot Mode
• Navigate to Recovery option using volume and power button -> Choose English -> Install from Internal storage -> Select the downloaded zip file -> Select 'Yes'
• Wait until the installation is complete -> Reboot
Note:
• Please keep in mind that this is beta software. These builds are not as stable as our official OTAs. By installing this update, you accept the potential risks.
https://forums.oneplus.com/threads/android-10-open-beta-1-for-oneplus-5-5t.1218721/
OnePlus 5 : https://oxygenos.oneplus.net/OnePlus5Oxygen_23_OTA_063_all_2004201835_a1de28fd0bda4c8b.zip
OnePlus 5T : https://oxygenos.oneplus.net/OnePlus5TOxygen_43_OTA_063_all_2004201837_eca63aa919a1477a.zip
Anyone dirty flashed the full zip through twrp and after that installed magisk for root? Does that work?
Im on latest stable.
PhoenixNLx said:
Anyone dirty flashed the full zip through twrp and after that installed magisk for root? Does that work?
Im on latest stable.
Click to expand...
Click to collapse
I don't think so... It's better to perform a clean install
Astur_Torque said:
I don't think so... It's better to perform a clean install
Click to expand...
Click to collapse
Offcourse its better. But just want to know if it works... If i dont have to install all of my apps again. I'll take a chance. So if anybody tried it allready.
Or clean install full zip and magisk after that maybe?
PhoenixNLx said:
Offcourse its better. But just want to know if it works... If i dont have to install all of my apps again. I'll take a chance. So if anybody tried it allready.
Or clean install full zip and magisk after that maybe?
Click to expand...
Click to collapse
I came here looking for this too. I guess I'll have to do a full backup just in case before updating.
Hi, I come from OOS Stable 9.0.11 root, I just uninstalled MAGISK via TWRP then I restarted and I went through settings then system and I did update locally and everything is fine past. I reflashed TWRP via Fastboot then root with Magisk the last via TWRP and it's all good !!!
Ssmiles said:
Hi, I come from OOS Stable 9.0.11 root, I just uninstalled MAGISK via TWRP then I restarted and I went through settings then system and I did update locally and everything is fine past. I reflashed TWRP via Fastboot then root with Magisk the last via TWRP and it's all good !!!
Click to expand...
Click to collapse
Did you dirty flash or?
yes dirty flash
kernel BluSpark OOS v193 error in TWRP
Recovery TWRP 3.3.1-x blu_spark v9.110
ctsProfil Magisk 20.4 false
Astur_Torque said:
I don't think so... It's better to perform a clean install
Click to expand...
Click to collapse
Yes it worked, for me except duo calls not working when google hotword is enabled, everything is working
duo it's desactived
I tried this method https://droidholic.com/fix-cts-profile-mismatch-errors/ but CHROME doesn't work afterwards so I uninstalled everything
I just dirty flashed it in bluspark.
Full zip install
Magisk 20.4
Clear cache
Done
@PierreVicquery02 Request you to please remove the "[OFFICIAL]" from the thread title. The official thread already exists (it is stickied). Thanks for understanding!
shadowstep said:
@PierreVicquery02 Request you to please remove the "[OFFICIAL]" from the thread title. The official thread already exists (it is stickied). Thanks for understanding!
Click to expand...
Click to collapse
My thread was published before the other one, but as you wish
PierreVicquery02 said:
My thread was published before the other one, but as you wish
Click to expand...
Click to collapse
The other one (official thread) was created on 25th November 2017 by Funk Wizard, when the first Open Beta was released. Ever since then, it has been used for announcing all subsequent Open Beta releases as well as gather feedback on them. Nonetheless, thanks for changing the thread title, I appreciate it!
Does any one have any idea how I can enable full screen gestures for OnePlus 5?
I flashed the open beta build and tries enabling on screen navigation buttons but it's giving me the old buttons
I tried using
adb shell settings put secure swipe_up_to_switch_apps_enabled 1
as it used to work on OOS 9, but this has no effect on the current open beta build
Thanks in advance
The wifi is randomly dropping for me then reconnecting. That happens quite often,anyone else experiencing it? I'm full stock with locked bootloader,haven't done a factory reset though.
this beta ROM can pass safety net with magisk?
fedex_742 said:
this beta ROM can pass safety net with magisk?
Click to expand...
Click to collapse
Somebody passes, somebody not. I don't know why.
OxygenOS 10.3.5
System
• Newly added user assistance feature to help user master usage skills quickly(Route: Settings>OnePlus Tips&Support)
• Optimized the power consumption performance of the system and improve user experience
• Fixed the flashback issue with some third-party apps
• Fixed known issues and improved system stability
• Updated Android Security Patch to 2020.09
Full Package
https://www.androidfilehost.com/?fid=8889791610682949950
I have root
I have rooted my op 7 pro,If I update it, will root work if I reinstall it?
MephoxSlam said:
I have rooted my op 7 pro,If I update it, will root work if I reinstall it?
Click to expand...
Click to collapse
U will have to root again.
Reboot to TWRP
Install update -- DONT REBOOT!
Install TWRP Installer
Reboot to recovery
Install Magisk
Done!
Thats the way it do it every time.
Psfanboy88 said:
Reboot to TWRP
Install update -- DONT REBOOT!
Install TWRP Installer
Reboot to recovery
Install Magisk
Done!
Thats the way it do it every time.
Click to expand...
Click to collapse
Can vouch for this method. I've used it every time to upgrade full OTA while rooted with magisk. 10/10
Only thing I would add is, when you install magisk, make sure to choose the 'inactive slot' option
Does someone have the EU version??
10.3.5 is working with data decrypted.
10.3.5 full OTA for gm21aa is up on oxygen updater
almightysiman said:
10.3.5 is working with data decrypted.
Click to expand...
Click to collapse
I don't do this since my OP5T days what procedure for OP7 PRO?
Mervingio said:
I don't do this since my OP5T days what procedure for OP7 PRO?
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
EU version is now live
Android 10.0.8 - EU now on Oxygen Updater.
Mirrors :
Oxygen OS - Android 10.3.5 - Global - OnePlus 7 Pro (GM21AA) : https://www.androidfilehost.com/?fid=8889791610682950702
Oxygen OS - Android 10.0.8 - EU - OnePlus 7 Pro (GM21BA) : https://www.androidfilehost.com/?fid=8889791610682950715
My Android 10 Folder : https://www.androidfilehost.com/?w=files&flid=296897
(TWRP recovery 3.4.0-0 and Magisk 20.4 Superuser still working without issue)
Psfanboy88 said:
Reboot to TWRP
Install update -- DONT REBOOT!
Install TWRP Installer
Reboot to recovery
Install Magisk
Done!
Thats the way it do it every time.
Click to expand...
Click to collapse
With deactivated magisk modules?
Or does it matter if you update via twrp?
How can I switch from Beta 18 to 10.3.5 for 7 pro by keeping root and TWRP?
ghost323 said:
With deactivated magisk modules?
Or does it matter if you update via twrp?
Click to expand...
Click to collapse
I dont deinstall Magisk or any modules before doing it. So far no complications.
Psfanboy88 said:
I dont deinstall Magisk or any modules before doing it. So far no complications.
Click to expand...
Click to collapse
Cool, thx
Abdülcelil said:
How can I switch from Beta 18 to 10.3.5 for 7 pro by keeping root and TWRP?
Click to expand...
Click to collapse
Just the usual process :
Ensure you have all files on storage before you start
Reboot to TWRP
Flash the FULL rom package
Immediately (without reboot) flash TWRP again
Reboot back into TWRP recovery
Flash Magisk
Reboot back into recovery
Clear cache because you're moving between release rings
Reboot into System
If you notice root missing then reboot back into recovery and flash Magisk again as you might be on the other slot.
I have this as an emergency backup with a USB-C to USB-B converter to transfer from PC.
Anyone else having issue with alarm clock not working ? Vibration works but not audio
farhan20 said:
U will have to root again.
Click to expand...
Click to collapse
Hehe sorry im new,is run so good
dave2775 said:
Anyone else having issue with alarm clock not working ? Vibration works but not audio
Click to expand...
Click to collapse
Same here
OxygenOS 11 OP7TPro_ O2_BETA_02
Magisk v21.4 Manager 8.0.7 Patched Root Boot Image
https://www.androidfilehost.com/?fid=17248734326145729690
Stock Boot Image
https://www.androidfilehost.com/?fid=17248734326145729691
ADB Enabled Recovery Image
https://www.androidfilehost.com/?fid=17248734326145729692
Stock Recovery Image
https://www.androidfilehost.com/?fid=17248734326145729693
Combined Folder
https://www.androidfilehost.com/?w=files&flid=322771
OxygenOS 11 OP7TPro_ O2_BETA_01
Magisk v21.4 Manager 8.0.7 Patched Root Boot Image
https://www.androidfilehost.com/?fid=17248734326145719958
Stock Boot Image
https://www.androidfilehost.com/?fid=17248734326145719959
ADB Enabled Recovery Image
https://www.androidfilehost.com/?fid=17248734326145719960
Stock Recovery Image
https://www.androidfilehost.com/?fid=17248734326145719961
Full ZIP OxygenOS HD01BA 11 Open Beta
https://androidfilehost.com/?fid=17248734326145719998
Combined Folder
https://www.androidfilehost.com/?w=files&flid=322187
May need to install Magisk Manager manually
OxygenOS 10.0.4 EU was kindly picked up by @t-ryder Linked Below
https://forum.xda-developers.com/t/...-rom-oxygen-os-10-0-14.4236633/#post-84539771
OxygenOS 10.0.13 HD01BA Magisk/Stock Boot Images, ADB/Stock Recovery
Magisk v21.1 Manager 8.0.3 Patched Root Boot Image
https://www.androidfilehost.com/?fid=10763459528675591459
May need to install Magisk Manager manually
Full ZIP OxygenOS HD01BA 10.0.13
https://www.androidfilehost.com/?fid=10763459528675591484
Stock Boot Image
https://www.androidfilehost.com/?fid=10763459528675591455
ADB Enabled Recovery Image
https://www.androidfilehost.com/?fid=10763459528675591468
Stock Recovery Image
https://www.androidfilehost.com/?fid=10763459528675591462
Combined Folders
https://www.androidfilehost.com/?w=files&flid=320311
Usage (Unlocked Bootloader)
adb devices (give permission on device)
adb reboot fastboot
fastboot devices (to confirm that device is being detected)
fastboot flash boot path/to/patched_boot.img or fastboot flash recovery path/to/patched_recovery.img
fastboot reboothttps://www.androidfilehost.com/?fid=17248734326145729693
Thanks for posting these very useful resources... much appreciated...
How's the full zip upload coming along?
I thought I was clever and used the patched magisk image for 10.0.13 HD01BA on my firmware (updated OTA) version 10.0.13 HD01AA... all seems to be working fine barring one crucial function, that being wifi which is greyed out...
I'm assuming the broken wifi radio is symptomatic of the differing firmware versions?
sand_man said:
How's the full zip upload coming along?
I thought I was clever and used the patched magisk image for 10.0.13 HD01BA on my firmware (updated OTA) version 10.0.13 HD01AA... all seems to be working fine barring one crucial function, that being wifi which is greyed out...
I'm assuming the broken wifi radio is symptomatic of the differing firmware versions?
Click to expand...
Click to collapse
I'm grabbing what I think is the HD01AA Full ZIP from Oxygen Updater, I'll grab the stock boot and try making a magisk patched img for you as well, If they work I might add HD01AA to my supported devices manifest.
digidude512 said:
I'm grabbing what I think is the HD01AA Full ZIP from Oxygen Updater, I'll grab the stock boot and try making a magisk patched img for you as well, If they work I might add HD01AA to my supported devices manifest.
Click to expand...
Click to collapse
That's very kind of you sir! I've flashed BA and WiFi is working now. I think my device, as are many others, are impartial to firmware version. BA/AA/global/European, seems to all be the same barring 1 or 2 minor differences. Using the right patched magisk boot image is critical though.
Having said that I'm yet to flash boot the patched image so let's see what effect it has on WiFi (it any)...
Once again thank you for providing these resources. [emoji1303]
sand_man said:
That's very kind of you sir! I've flashed BA and WiFi is working now. I think my device, as are many others, are impartial to firmware version. BA/AA/global/European, seems to all be the same barring 1 or 2 minor differences. Using the right patched magisk boot image is critical though.
Having said that I'm yet to flash boot the patched image so let's see what effect it has on WiFi (it any)...
Once again thank you for providing these resources. [emoji1303]
Click to expand...
Click to collapse
Hope this helps
https://forum.xda-developers.com/7t-pro/how-to/oos-10-0-13-hd01aa-t4195159
@digidude512 Every Update needs a new Thread... interesting.
Stop this sh!t.
K3V1991 said:
@digidude512 Every Update needs a new Thread... interesting.
Stop this sh!t.
Click to expand...
Click to collapse
Your feedback has been taken.
Original Post has been updated for OxygenOS 11 Open Beta.
OOS 10.0.13 is still in original post but moved to spoiler.
Thanks for the update. Will probably stay on 10.0.13 for now though, as it is super stable and practically bug free.
Hello,
I just want to confirm is it really that simple to get Magisk & Root Access just by flashing patched boot image? Won't I need to full system & data wipe? I have stock OOS 10.0.13.
Athum said:
Hello,
I just want to confirm is it really that simple to get Magisk & Root Access just by flashing patched boot image? Won't I need to full system & data wipe? I have stock OOS 10.0.13.
Click to expand...
Click to collapse
yes
Thread updated with Open Beta 2
In the beta 2 A11 i have problem with magisk. Update and bootloop. All steps install correct and finnaly bootloop.
Any steps to fix it?
Magisk 21.4
chudy34 said:
In the beta 2 A11 i have problem with magisk. Update and bootloop. All steps install correct and finnaly bootloop.
Any steps to fix it?
Magisk 21.4
Click to expand...
Click to collapse
Just to confirm are you using a OnePlus 7T Pro EU Model.
HD01BA is for EU, I will be updating my second thread for 7T Global (HD01AA) and India models later.
digidude512 said:
Just to confirm are you using a OnePlus 7T Pro EU Model.
HD01BA is for EU, I will be updating my second thread for 7T Global (HD01AA) and India models later.
Click to expand...
Click to collapse
yes my model is EU.
I updated ota and install magisk unactive slot and the same boot to recovery and bootloop. Maybe problem is in magisk?
Flashing via OTA full ROM works great. After installation was completed I installed magisk to inactive slot and rebooted my device after this and my device is still rooted! Automatic brightness works much better with Beta 2
kaplatz said:
Flashing via OTA full ROM works great. After installation was completed I installed magisk to inactive slot and rebooted my device after this and my device is still rooted! Automatic brightness works much better with Beta 2
Click to expand...
Click to collapse
I get an error. And what version of magisk do you use? I used the latest 21407 and unfortunately bootloop after uploading.
I use 21.4 (21400) and it works like a charm.
Do we get patched boot image or diy instructions for Beta 3?
I see the release candidate for Android 11 has dropped! Anyone have access to the full download file? All I can find is the open_beta 4 which isn't going to work patched and flashed running the RC...
Have anyone can upload the last oos A11 adb recovery please