Database Develop

ROM: Sony AOSP 8.1 (H3113) (unofficial)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sony AOSP project​
Disclaimer
I'm not liable for anything YOU do to YOUR device, YOU are doing it and it's YOUR device.
What is it?
It's a project developed and maintained by Sony Xperia Developers team.
You can get more informations here: https://developer.sony.com/develop/open-devices/
Can I build it by myself?
Sure, just follow these instructions and have patience!
What works and what doesn't?
According to this official page, almost everything seems to be fine.
How can I flash it?
Follow these steps:
Unlock the bootloader (this will erase your data and will void warranty): https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/
Setup fastboot on your PC (there are many guides for this step)
Download and unpack the zip archive
Open a shell into the folder containing unpacked files
Run these commands:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img (it’s not necessary to flash userdata every time)
Download and unpack the corresponding vendor image from here: https://developer.sony.com/develop/open-devices/downloads/software-binaries
Open a shell into the folder containing unpacked image
Run this command:
fastboot flash oem SW_binaries_for_Xperia_xxxxx.img (where "xxxxx" varies depending on the file)
(optional) In case you want to flash GApps, Magisk or other mods, you can use TWRP: https://forum.xda-developers.com/xa2-ultra/development/recovery-twrp-3-2-1-0-touch-recovery-t3774193
Reboot the device and enjoy!
Download link
You can get the builds from my AFH folder: https://androidfilehost.com/?w=files&flid=269497.
I haven't done any change to Sony's source code, these are vanilla builds.
Credits
All credits go to Sony and Google.
XDA:DevDB Information
Sony AOSP, ROM for the Sony XA2 Ultra
Contributors
axxx007xxxz
Source Code: https://github.com/sonyxperiadev
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Testing
Created 2018-05-08
Last Updated 2018-05-08

Reserved
NOTE: I'm in no way associated with Sony, these are unofficial builds and are made for pesonal usage.
Also, these builds are untested so I can't assure they're going to work!

Reserved 2
Post reserved for future usage.

Reserved 3
Post reserved for future usage.

Reserved 4
Post reserved for future usage.

New build
Build informations:
Build type: userdebug
Android revision: android-8.1.0_r20
CAF revision: LA.UM.6.4.r1
Last commit of sonyxperiadev/local_manifests: 81032020581dd636ab9d7f8414609bad07332288
Last commit of sonyxperiadev/kernel: 1df958f2943c6c5cae31018e42d2f42e8a55c4b3
Last commit of sonyxperiadev/device-sony-nile: c775da101d57377979cdcb79b1ba1b5bbd3739a4
Last commit of sonyxperiadev/device-sony-pioneer: 5b804c4aa86ca13653d2d692120437fa76f61ae9.
Download link: https://androidfilehost.com/?fid=818222786056029296.

It always says "There's an internal problem with your device" after booting up. It's kinda annoying.
And it also does not accept my Samsung microSD card formatted on stock ROM and wants me to format it. I'm backing it up, and will try to format it later.
Fingerprint aslo does not work, but I'm fine with that at the moment.
If someone needs to know, I have H4113 (dual-sim variant of regular XA2).

Casserole said:
It always says "There's an internal problem with your device" after booting up. It's kinda annoying. And it also does not accept my Samsung microSD card formatted on stock ROM and wants me to format it.
Click to expand...
Click to collapse
Just information: I have the H3223 not H3213, and haven't tried to flash this, but on the Google Pixel (8.1) with at least some custom kernels and some versions of Magisk, the same "There's an internal problem with your device" when you boot up, but other than possibly having your phone screen on longer than it should, there are no actual problems on the Pixel. Could be for the same reason(s), whatever those reasons are. I'm not positive but I think that more recent versions of Magisk might not cause that message anymore. I use an old version of Magisk, but in my case the Pixel custom kernel I use causes that, too.

roirraW "edor" ehT said:
I'm not positive but I think that more recent versions of Magisk might not cause that message anymore. I use an old version of Magisk, but in my case the Pixel custom kernel I use causes that, too.
Click to expand...
Click to collapse
I haven't flashed any magisks at the moment, so I don't think the problem are caused by it. But thanks anyway for the reply.

Casserole said:
I haven't flashed any magisks at the moment, so I don't think the problem are caused by it. But thanks anyway for the reply.
Click to expand...
Click to collapse
You're welcome! I'm not suggesting that you flashing Magisk or anything is the cause of this on this ROM, it's just related to changes in Android 8.1 and that it doesn't really necessarily mean there's something wrong. I'm sure there are ways around it, but since I'm not a developer and I don't know what triggers it, I don't know.

Is fingerprint scanner not working for everyone or it is not working only for those with a fingerprint scanner made by a a different hardware maker?

tombassi said:
cool down dude !! XDA is not the correct please for these bad words. if you don't know what you are doing that is not the Developer fault and if you need no bugs stay with the stock ROM.
Click to expand...
Click to collapse
Thanks! With "almost everything seems to be fine", I meant that most of the main parts (should) work.
Camera is a known problem on Sony devices due to DRM keys getting erased on bootloader unlock.
Casserole said:
It always says "There's an internal problem with your device" after booting up. It's kinda annoying.
And it also does not accept my Samsung microSD card formatted on stock ROM and wants me to format it. I'm backing it up, and will try to format it later.
Fingerprint aslo does not work, but I'm fine with that at the moment.
If someone needs to know, I have H4113 (dual-sim variant of regular XA2).
Click to expand...
Click to collapse
The SD card problem could be related to your phone being dual SIM: as the title says, these builds are for H3113 (single SIM variant).
You can try to set dual SIM properties in build.prop (you can do it with an app like this or a text editor if you have root access, otherwise I think it's doable through TWRP too):
Code:
persist.multisim.config=dsds
persist.radio.multisim.config=dsds
ro.telephony.default_network=9,1
then reboot the phone and test.
These come directly from H4113 makefile, I can't assure you everything will be fine after this, but you can give it a try.
As per the fingerprint, it's currently broken on all variants, I'm sorry.
mirco_pa said:
Is fingerprint scanner not working for everyone or it is not working only for those with a fingerprint scanner made by a a different hardware maker?
Click to expand...
Click to collapse
Sony website reports it as currently not working on AOSP, I'm sorry.

axxx007xxxz said:
The SD card problem could be related to your phone being dual SIM: as the title says, these builds are for H3113 (single SIM variant).
You can try to set dual SIM properties in build.prop (you can do it with an app like this or a text editor if you have root access, otherwise I think it's doable through TWRP too):
Click to expand...
Click to collapse
I think SD card problem was related to something else, because it started working after reformatting.
But there were also problems with SIM card, it worked on first boot, but after removing and inserting it again device shown that there were no signal, so your solution may be helpful in this situation. I can't test it due to limited amount of time, though.

New build
Build informations:
Build type: userdebug
Android revision: android-8.1.0_r26
CAF revision: LA.UM.6.4.r1
Last commit of sonyxperiadev/local_manifests: 1c992d7f3f2ef8d0b53397e23227e10489e40bec
Last commit of sonyxperiadev/kernel: ab6fd5b1a4126cfdd4391eefe8eba17eb6626781
Last commit of sonyxperiadev/device-sony-nile: 7d57c76da9ce47849429347e77e013781e63db2f
Last commit of sonyxperiadev/device-sony-pioneer: 5b804c4aa86ca13653d2d692120437fa76f61ae9.
Download link: https://androidfilehost.com/?fid=890278863836285554.

Can you build one for H4113? You shood have files for it too

Thanks axxx007xxxz for sharing these builds! They helped me recover Android on my completely wiped h3113 pioneer. Both the 8.0 and 8.1 build work for me. Downloading them to my PC was the hardest part, for some reason the download often fails.
I still have a couple of questions about these Sony AOSP builds that maybe you can answer:
1. Do you know what the Sony software binaries* do? I have flashed them on my device a couple of times, but I don't see anything added.
2. What is the difference between build type "userdebug" and "eng"?
3. If I use this build, how would you recommed I update it? Is the only way to flash in fastboot? (Like step 6 in Sony's guide**?)
Thank you!
roirraW "edor" ehT said:
Just information: I have the H3223 not H3213, and haven't tried to flash this, but on the Google Pixel (8.1) with at least some custom kernels and some versions of Magisk, the same "There's an internal problem with your device" when you boot up, but other than possibly having your phone screen on longer than it should, there are no actual problems on the Pixel. Could be for the same reason(s), whatever those reasons are. I'm not positive but I think that more recent versions of Magisk might not cause that message anymore. I use an old version of Magisk, but in my case the Pixel custom kernel I use causes that, too.
Click to expand...
Click to collapse
I get the same error message right after booting, also without root. It's annoying, but I guess I can live with it.
P.S. As I'm a new user, I cannot use links yet. Please use these footnotes instead:
*: https[colon]//developer[dot]sony[dot]com/develop/open-devices/downloads/software-binaries
**: https[colon]//developer[dot]sony[dot]com/develop/open-devices/guides/aosp-build-instructions/build-aosp-nougat-8-1-oreo-4-4/#tutorial-step-6

1. parts of android which are closed source, graphics driver for example. you won't see them.
2. eng should give you more debugging options, like working adb logcat without enabling developer options which is sometimes needed while you're porting android to new device and there's just black screen on the phone for example. correct me if i'm wrong.
3. flashing worked through twrp for me but i had to build unsingned zip.
regarding the internal problem message, just ignore it.

davidhozic said:
Can you build one for H4113? You shood have files for it too
Click to expand...
Click to collapse
Checking H4113 makefile, I don't see big differences except for a few properties: https://github.com/sonyxperiadev/device-sony-pioneer/blob/master/aosp_h4113.mk#L18-L22; you can try to set them (you can use an app like this) and check if you can get dual SIM to work.
I can make a H4113 build if you want to test it though.
Nonstop decay said:
Downloading them to my PC was the hardest part, for some reason the download often fails.
Click to expand...
Click to collapse
Unfortunately, Android File Host is problematic sometime.
Nonstop decay said:
I still have a couple of questions about these Sony AOSP builds that maybe you can answer:
1. Do you know what the Sony software binaries* do? I have flashed them on my device a couple of times, but I don't see anything added.
2. What is the difference between build type "userdebug" and "eng"?
3. If I use this build, how would you recommed I update it? Is the only way to flash in fastboot? (Like step 6 in Sony's guide**?)
Click to expand...
Click to collapse
Basically, what @frantisheq said.
I think you can flash IMG files through TWRP too if you extract the ZIP into your phone's memory.

axxx007xxxz said:
I can make a H4113 build if you want to test it though.
Click to expand...
Click to collapse
Just wondering aside from not being supported in Sony's open device program what exactly is needed to get the H3223 from getting AOSP 8.1 built for it? I can't imagine the kernel being much different on the H3223 from any of the other XA2 Ultra single sim models, right?

axxx007xxxz said:
Checking H4113 makefile, I don't see big differences except for a few properties: https://github.com/sonyxperiadev/device-sony-pioneer/blob/master/aosp_h4113.mk#L18-L22; you can try to set them (you can use an app like this) and check if you can get dual SIM to work.
I can make a H4113 build if you want to test it though.
Unfortunately, Android File Host is problematic sometime.
Basically, what @frantisheq said.
I think you can flash IMG files through TWRP too if you extract the ZIP into your phone's memory.
Click to expand...
Click to collapse
Yes plese make a build for H4413, i get so many random errors and every time i fix an error there appears another. And is the build for this model supposed to work with h4113? Aren't the boot images incompatible?

[OFFICIAL] [NIGHTLIES] LineageOS 16.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Moto Z2 Force
Code:
- Your warrenty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 16.0 thread for the Motorola Moto Z2 Force, codename nash.
Join our Moto Z2 Force Development Discord server!
How to Install:
Please follow the instructions on our Official LineageOS Wiki page here.
If you don't follow these instructions, please don't expect support here. We also don't support 3rd party addons (Magisk/XPosed/Dolby/Viper/etc.), so please don't seek support if you use these.
Known Bugs:
Camera Mods don't work
Official Lineage OS builds will not ever allow Moto's Battery Mod "Efficiency Mode" to work.
The EQ Apps for Audio Mods (eg. JBL2 App) won't work, and will crash.
Ultrasonic Proximity Sensor doesn't work -- No support present in the OSS Audio HAL. If it was written in, it wouldn't be used by anything in Lineage, as the normal proximity sensor works fine.
Notes:
Official Lineage OS builds for nash ship with full Project Treble compatibility! Flash GSI's to your heart's content after flashing Lineage. Please don't report GSI bugs here, report them instead to the GSI's maker.
Technical details on our Treble implementation:
Treble is enabled with VNDK runtime enforcement. VNDK runtime enforcement means that unlike most "ported treble" you'll see, ours is just as it would be from the OEM, and can run GSIs. without need for hacks or additional flashable zips. We relabeled /oem to /vendor (as /oem isn't wasn't used in custom ROMs anyway). To use a GSI, flash official Lineage, then flash your GSI, it's that simple! Flashing a factory image will likely write over /oem and remove the mock vendor image.
Download:
LineageOS Updater
npjohnson's Personal Updater -- These are experimental, likely to break/eat your cat/destroy your data, and include GApps -- you'll only find support for these in the Discord linked above.
XDA:DevDB Information
[OFFICIAL] [NIGHTLIES] LineageOS 16.0, ROM for the Moto Z2 Force
Contributors
npjohnson, erfanoabdi, invisiblek
Source Code: https://github.com/LineageOS/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Oreo Firmware
Based On: LineageOS
Version Information
Status: Nightly
Created 2019-03-03
Last Updated 2020-01-12

Reserved

Reserved

Thank you， ota ：）

How to get root on LOS 16?
There's no official root binary for LOS 16: https://download.lineageos.org/extras

7bob said:
How to get root on LOS 16?
There's no official root binary for LOS 16: https://download.lineageos.org/extras
Click to expand...
Click to collapse
Check again.

Just finished installing Lineage 16 on my moto z2 force, I cannot find the option for locking the screen by using the fingerprint that came originally with the phone. Is this feature available on lineage 16?

zidemizar said:
Just finished installing Lineage 16 on my moto z2 force, I cannot find the option for locking the screen by using the fingerprint that came originally with the phone. Is this feature available on lineage 16?
Click to expand...
Click to collapse
Yes. If you aren't seeing it, I'd suspect you're using an unsupported addon, or your hardware is failing.
It shows up/works fine here.

npjohnson said:
Check again.
Click to expand...
Click to collapse
Thanks, now I see it.
Is there something I have to consider when updating a Z2 Force from 15.1 to 16? Or can I just follow the general update guidelines?

7bob said:
Thanks, now I see it.
Is there something I have to consider when updating a Z2 Force from 15.1 to 16? Or can I just follow the general update guidelines?
Click to expand...
Click to collapse
Just follow general guidelines. We already had testers and upgrading from 15.1 to 16.0 didn't cause any issues. Obviously, if you do run into an issue, it is suggested to clean flash first to see if it was a borked update

npjohnson said:
Yes. If you aren't seeing it, I'd suspect you're using an unsupported addon, or your hardware is failing.
It shows up/works fine here.
Click to expand...
Click to collapse
Do you have a screenshot showing that it shows under screenlock settings?
Also what gaaps did you use when installing, I used the reccomended mindthegaaps and it kept giving me errors related to pixel apks.

link if image does not work
https://imgur.com/a/1eoVcgk
This is what shows under my screenlock setting, I do not have the setting that allows me to lock the phone using the fingerprint reader, this is from a fresh Lineage 15.1 installation with mindthegaaps, nothing else is installed on it. Had the same issue with lineage 16

Am I able to install Lineage 16 on Sprint Moto Z2 Force? I will get the phone next week, so I don't know if it's nash or what? Thanks.

Now I have installed los 16 and it was instructive for me. Learning by doing. After I have get working TWPR on both slots, data area of los 16 was suddenly encoded and requires a passwort for it on TWRP start to use it. So backup of intern data fails. Ok so far, we have two slots and that's anyway the backup. But how will work the update process? Just over the updater-function in settings/system or over TWRP? I'm on slot b now and on system_a is nothing. If I want update later, I have to do just flash the zip over TWRP and then reboot it and then maybe flash gapps again, because it's the first update on slot_a? Hope that's works because the encoding problem. Don't have the key.

AmazerG said:
Am I able to install Lineage 16 on Sprint Moto Z2 Force? I will get the phone next week, so I don't know if it's nash or what? Thanks.
Click to expand...
Click to collapse
Sure. It works on TMO and SPR, just no VZ and ATT for obvious reasons. Nash is the internal name for the Z2.
allrightlite said:
After I have get working TWPR on both slots, data area of los 16 was suddenly encoded and requires a passwort for it on TWRP start to use it. So backup of intern data fails. Ok so far, we have two slots and that's anyway the backup. But how will work the update process? Just over the updater-function in settings/system or over TWRP?.
Click to expand...
Click to collapse
Remove your fingerprint and screen lock method prior to entering TWRP. If you came from a stock ROM you must format data before flashing LOS. Updates can be done automatically with the updater, or manually thru recovery. The latter requires more time with no added benefits. Also encryption is enabled with custom ROMs.

So I was able to successfully update from 15.1 to 16.0. Here's what I did:
Backup my data
Boot into bootloader
Code:
fastboot boot twrp-3.2.3-2-nash.img
In TWRP, wipe System partition, then start sideload
Code:
adb sideload lineage-16.0-20190305-nightly-nash-signed.zip
reboot into bootloader
Code:
fastboot boot twrp-3.2.3-2-nash.img
In TWRP, start sideload
Code:
adb sideload MindTheGapps-9.0.0-arm64-20190216_211116.zip
Code:
adb sideload addonsu-16.0-arm64-signed.zip
reboot
done

I have tries at this moment to update over the lineage updater in settings and it's stopping with installation error. After try to reboot to TWRP it's endet up in reboots. But LOS16 stats normally again after press power button a little bit. Now I try again to update. Presumably it isn't working again. I think I will reflash twrp first and try then over this to update. Good idea or what's going wrong on my phone?
I must do new install. All broken. Holy crap. Hope this time I get it working.

7bob said:
So I was able to successfully update from 15.1 to 16.0. Here's what I did:
Backup my data
Boot into bootloader
Code:
fastboot boot twrp-3.2.3-2-nash.img
In TWRP, wipe System partition, then start sideload
Code:
adb sideload lineage-16.0-20190305-nightly-nash-signed.zip
reboot into bootloader
Code:
fastboot boot twrp-3.2.3-2-nash.img
In TWRP, start sideload
Code:
adb sideload MindTheGapps-9.0.0-arm64-20190216_211116.zip
Code:
adb sideload addonsu-16.0-arm64-signed.zip
reboot
done
Click to expand...
Click to collapse
what are the steps to update from firmware 8.0 to LineageOS 15.1 or 16, please
unlock bootloader, twrp, magisk (no problem),
My phone locks the boot loader again when I try to install a custom ROM
my firmware (TWRP, magisk)
RETAIL/NASH_RETAIL_8.0.0_OPXS27.109-34-19_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
in any way I thank you :good:

Ok, I have found out how get it working. Updater app not working here, always installation error after end of update process. Don't know why. So now I have a way found out, which seems to be working every update. Go to TWRP, flash los16 new zip and, this is very important (understand it very late xD) don't forget to flash twrp installer zip directly after los 16, because otherwise on the other slot is the stock recovery again. So, after this boot to the other slot with twrp directly from your phone and flash gapps every time, every update. Here I forgot it and nothing of the play store and co. was working anymore. Android Framework ID was away, too. Is there an easier way to update over TWRP or do I have to do so? And what happend to, backup wasn't possible to restore, maybe cause thought encoding?
The new update process with A/B is not easy to understand directly But the rom is a beast, very very good. Why I update and switch to los16? That's easy, because the bluetooth bugs on stock oreo was terrible (and no 8.1-batterie icon ) and lags on few drm videos and here and there. Speed of the UFS-flash going slower and slower, no its 3 times faster again. This phone works really great with LOS16. Very good work! It's not easy to understand all, but I will get it in my brain
Edit: There is another point, which could be interesting. Netflix shows error on start up (15001) and this even though safety net is passed. Hm.. Have downloaded from play store. Maybe older version does do this job, don't know.

Ace42 said:
Sure. It works on TMO and SPR, just no VZ and ATT for obvious reasons. Nash is the internal name for the Z2.
Click to expand...
Click to collapse
Is there anything different between Sprint Z2 force and Tmo ones in terms of hardware such as lack some band or what?

[ROM][UNOFFICIAL][jd2019][9 Pie] LineageOS 16.0 for the Lenovo Z5s L78071

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 Pie, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Known issues: (as of May 19, 2020)
- FM Radio app doesn't work; It actually works, just once every two attempts: If it crashes the first time, select close app, clear apps from background and try again; I'll find a definite fix soon;
- Wi-Fi signal strength doesn't show on status bar, only in the wireless screen;
- Fingerprint reader doesn't work;
- SELinux is currently set to permissive;
Instructions:
- This is a FULL ROM build, meaning your BOOT, DTBO, SYSTEM and VENDOR partitions will be overwritten. Backup first!
- You need firmware version 11.x.y (preferably 11.3.169 - recovery encryption only tested with that version), any will do. 10.5 will not work
- Download TWRP from the files section, fastboot flash it (if you don't have custom recovery yet)
- Download patched vbmeta.img
- Download the latest build
- (Optional) Download Gapps (arm64 9.0, any flavor) and Magisk
- Boot to recovery (whichever you have), flash the new recovery
- Reboot to recovery, now your data is decrypted, flash vbmeta, latest build, magisk and gapps
- Format DATA completely to start from scratch since encryption is different
- Reboot
Downloads:
Builds: https://sourceforge.net/projects/lineageos-lenovo-z5s/files/
Source code:
LineageOS: https://github.com/LineageOS
Kernel and Device Tree: https://github.com/jacoghi
Reporting Bugs:
DO NOT Report bugs if you're not following the instructions!
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.

Changelog:
May 19, 2020:
- Initital release, everything working except for FM and fingerprint reader;
- Kernel is completely overhauled and updated to LA.UM.7.8.r1-08500-SDM710.0;
- Audio drivers are stock 11.3.169 (we don't have the sources);
- Wifi is open-source, with MAC randomization currently being tested;
- Call recording already works;
- BT Audio works for calls and everything else, HD codecs being optimized;
- Wifi Display works perfectly on my cheap chinese Android TV Box. Please test with a Chromecast / Google Cast / SmartTVs, since I don't have any of those;
- Camera2API is active, RAW pictures are also enabled;
- Build will automatically encrypt your device, I had to fool Lenovo's BS keymaster to make it work, so it has to be enabled;
- As of now, I don't care if your apps work or not, that's not my problem, just let me know about hardware issues;

jacoghi said:
Please test with a Chromecast / Google Cast / SmartTVs, since I don't have any of those;
Click to expand...
Click to collapse
I can confirm that this works.
It's great to have a ROM that works and doesn't have audio problems or auto brightness issues compared to GSIs. I've been using this for two days without any problems aside from the bugs already mentioned. I am holding off on using Magisk like I normally do so as not to introduce complications.
Overall, a great first effort. Thank you very much!

carlshark said:
I can confirm that this works.
It's great to have a ROM that works and doesn't have audio problems or auto brightness issues compared to GSIs. I've been using this for two days without any problems aside from the bugs already mentioned. I am holding off on using Magisk like I normally do so as not to introduce complications.
Overall, a great first effort. Thank you very much!
Click to expand...
Click to collapse
Thanks for confirming that to me, great to know. Would you happen to have any of those fancy hi Def Bluetooth headphones so we can test aptx and aptxhd? And you can use magisk without any issues, I'm using it here right now, no problems.

jacoghi said:
Would you happen to have any of those fancy hi Def Bluetooth headphones so we can test aptx and aptxhd?
Click to expand...
Click to collapse
No, sorry. If that changes, I will let you know
I can imagine most of the users that are here are currently using a GSI. The stock 11.3.169 from here can actually be installed via TWRP. Flashing it would revert to stock recovery so users need to reinstall the TWRP recovery image during the same session. That's how I ensured that I was running an 11.x firmware after using all those GSIs from 4PDA. Hopefully this helps others to revert to stock so they can use your LOS build.

Some more good news, we now have a TWRP that decrypts data even from this updated Lineage 16 build. It actually should work for any ROM flashed atop firmware 11.3.169. That's the one I'm using and probably the majority of people who wanna stick to "the latest and greatest" speech, so here we go, now we can enable OTAs without any issues and flash anything. This recovery can decrypt any data regardless of password type, so you can use PATTERN, PIN, or whatever, it will work, I tested them all.
https://sourceforge.net/projects/lineageos-lenovo-z5s/files/twrp-3310-jd2019-recovery.img/download

And what is apparently massive news for us, our phone will get an Android 10 official update, meaning we'll be able to boot lineage 17.1 with the updated audio drivers (in theory). Anybody in China or who knows how to trick their system and able to get ahold of these files?
https://club.lenovo.com.cn/thread-5849244-1-1.html

jacoghi said:
Some more good news, we now have a TWRP that decrypts data even from this updated Lineage 16 build. It actually should work for any ROM flashed atop firmware 11.3.169. That's the one I'm using and probably the majority of people who wanna stick to "the latest and greatest" speech, so here we go, now we can enable OTAs without any issues and flash anything. This recovery can decrypt any data regardless of password type, so you can use PATTERN, PIN, or whatever, it will work, I tested them all.
https://sourceforge.net/projects/lineageos-lenovo-z5s/files/twrp-3310-jd2019-recovery.img/download
Click to expand...
Click to collapse
Hi, I used your recovery to try and create a full backup of your ROM before I go back to stock. I encounter an error when it tries to backup the system partition - the backup fails. When I tried to install the Full OTA ROM from Lenovo, it also fails. I flashed the other TWRP and both the backup and install worked.
I'm going back to stock to get the 11.5 update available only if the phone has a locked bootloader.

carlshark said:
Hi, I used your recovery to try and create a full backup of your ROM before I go back to stock. I encounter an error when it tries to backup the system partition - the backup fails. When I tried to install the Full OTA ROM from Lenovo, it also fails. I flashed the other TWRP and both the backup and install worked.
I'm going back to stock to get the 11.5 update available only if the phone has a locked bootloader.
Click to expand...
Click to collapse
Hey man, thanks for the report. I just rebooted to recovery and backed up the system partition without a hitch, so no clue what happened with you. Regarding the Lenovo Ota it probably doesn't work since they use different manifests from the ones I'm using with lineage. Nevertheless I'll make it universal now that I know about it. Let me know if you can get 11.5 and we can make a dump of all partitions. Thanks man

jacoghi said:
Hey man, thanks for the report. I just rebooted to recovery and backed up the system partition without a hitch, so no clue what happened with you. Regarding the Lenovo Ota it probably doesn't work since they use different manifests from the ones I'm using with lineage. Nevertheless I'll make it universal now that I know about it. Let me know if you can get 11.5 and we can make a dump of all partitions. Thanks man
Click to expand...
Click to collapse
The only thing I can think about was that I was trying to save to a microSD instead of internal storage.
Anyhow, I'm back on LOS. I went back to stock, relocked the bootloader, got the update notification but the downloaded update fails on install. I "read" in the Chinese forums that access to 11.5 is some sort of closed beta; some users also encounter failed updates.
@wzsx150 published a new TWRP based on Android 10, probably with the partition file info of 11.5. It doesn't work for me when I flashed it on top of 11.3 (Android 9). Thought it might help you further.

carlshark said:
The only thing I can think about was that I was trying to save to a microSD instead of internal storage.
Anyhow, I'm back on LOS. I went back to stock, relocked the bootloader, got the update notification but the downloaded update fails on install. I "read" in the Chinese forums that access to 11.5 is some sort of closed beta; some users also encounter failed updates.
@wzsx150 published a new TWRP based on Android 10, probably with the partition file info of 11.5. It doesn't work for me when I flashed it on top of 11.3 (Android 9). Thought it might help you further.
Click to expand...
Click to collapse
hey man could you please help out, was trying to revert to the stock rom but getting a blank screen after i'm done and it shows lenovo

carlshark said:
The only thing I can think about was that I was trying to save to a microSD instead of internal storage.
Anyhow, I'm back on LOS. I went back to stock, relocked the bootloader, got the update notification but the downloaded update fails on install. I "read" in the Chinese forums that access to 11.5 is some sort of closed beta; some users also encounter failed updates.
@wzsx150 published a new TWRP based on Android 10, probably with the partition file info of 11.5. It doesn't work for me when I flashed it on top of 11.3 (Android 9). Thought it might help you further.
Click to expand...
Click to collapse
That's why it failed, system partition is 5.1 GB, your sdcard is probably formatted in FAT32 which DOESN'T ALLOW files over 4GB, that's a filesystem limitation.
I'll wait for somebody getting us 11.5 firmware files and release a new twrp for Android 10, (partitions won't change and AFAIK, wsx's twrp doesn't decrypt and is full of extra non open source stuff) and Lineage 17.1, until then makes little sense to me update this knowing it won't last long anyways.

jacoghi said:
That's why it failed, system partition is 5.1 GB, your sdcard is probably formatted in FAT32 which DOESN'T ALLOW files over 4GB, that's a filesystem limitation.
Click to expand...
Click to collapse
Oh, right, I totally forgot all about that. Should have tried enabling compression or saving to internal storage.
I'll wait for somebody getting us 11.5 firmware files and release a new twrp for Android 10, (partitions won't change and AFAIK, wsx's twrp doesn't decrypt and is full of extra non open source stuff) and Lineage 17.1, until then makes little sense to me update this knowing it won't last long anyways.
Click to expand...
Click to collapse
I've found a 4PDA post regarding updating to 11.5 and reposted the good stuff here. Hope it helps. Thanks for your good work!
---------- Post added at 06:38 AM ---------- Previous post was at 06:35 AM ----------
seisa said:
hey man could you please help out, was trying to revert to the stock rom but getting a blank screen after i'm done and it shows lenovo
Click to expand...
Click to collapse
I know this is the wrong thread to answer this, but we can't really help you out without some more details. Were you trying to install through recovery? Through QFIL?
From the looks of it, sounds like you have a bootloop. Try doing QFIL again and unlocking bootloader, or the other way around - sometimes it works for me that way.

I have Z5s 6GB/128GB model, sold as Global Version & Global ROM.
It does have EU LTE bands, so it probably is somewhat "global".
The downside: I am at 10.5 version with no updates available. Seller also told that there are no updates.
Two questions:
1. Is it absolutely necessary to have 11.3+ to install this LineageOS ROM? What is blocking installation if I have 10.5? Can I brick it?
-- EDIT: I will answer myself: Yes it is needed. LineageOS did not flash over 10.5 and gave an error. That was validation error before flashing, so no harm done.
2. Is it safe to install Chinese ROM on this device? Is it possible to loose something in the process? Like LTE bands or something else important?
-- EDIT: Seems to be ok.
I really want to install LineageOS or some other google free AOSP ROM. But I do not want to loose important features or brick it in the process.
Thanks.
EDIT: I installed Arrow OS GSI at the moment over 10.5 and it seems to work. But still looking forward to get pure LineageOS installed.

I have one problem that is hardware related:
Microphone level is quite low compared to my previous phone and people are complaining about low volume when I call.
Is there any way to add more gain? I tried to search but did not find easy and straightforward answer. Most solutions refer to methods/files that do not exist on this ROM.
What I found was complaint that there is still no way to easily manage audio stuff in android...
Mic Test (lauresprojects.com.mictest) app confirms that recording levels are considerably lower in both direct sound and communication mode when comparing to my other phone.
Otherwise seems to working quite nicely. Thanks for your good work.

I can't use face unlock with this ROM.

Is there still some active development at this project?
Is there some active development at this project?

[ROM][RAV*/SOFIA*][11][UNOFFICIAL] PixelExperience (Plus) [AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for [RAV*/SOFIA*]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Face unlock
Lights
Sound/vibration
Known issues
FM Radio
You tell me
Downloads
Link to Post
Installation
Link to Post
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog​
Android OS version: 11
Security patch level: November 2021
Build author/Device Maintainer: AbsoluteZeroEdge
Kernel Source: https://github.com/S4muel007/kernel_motorola_trinket
Device Source: https://github.com/ph4n70m-404/device_motorola_sofiar
Vendor Source: https://github.com/ph4n70m-404/vendor_motorola_sofiar
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Contributors
Vache for initial device and vendor sources + TWRP
ph4n70m & Beetle84 for tons of building help
S4muel007 for kernel
Thanks awesome peeps
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2021-11-20
Last Updated 2021-11-21

Download Links
TWRP
TWRP - Credit to Vache
https://drive.google.com/file/d/1SwiiptkODqLTnDF1GRknYrF2g2yPxdJY/view
Pixel Experience
11/20/2021 Build - Initial Build
https://drive.google.com/drive/folders/1pdStP6Rnph19wIu_plpDwjRa124yJvNK?usp=sharing
11/21/2021 Build - Added Moto Camera 2
https://drive.google.com/drive/folders/1dSnZUiuK5TlOEtZU8oQIbjjV-TxJgFyr?usp=sharing

Installation
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
FastbootD
1) Extract rom zip and open cmd prompt in the extracted folder
2) Reboot into fastbootd
Code:
fastboot reboot fastboot
3) Flash images
Code:
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.img
fastboot flash product product.img
fastboot flash system system.img
4) Format data
Code:
fastboot -w
5) Reboot, profit.
TWRP
1) Boot to bootloader
2) Flash TWRP (included download above)
Code:
fastboot flash recovery_a twrpfile.img
fastboot flash recovery_b twrpfile.img
3) Flash the rom
4) Format Data (not factory reset)
5) Reboot, Profit
5.1) (Optional) If magisk is desired flash it in TWRP after first boot

Reserved

I would like to try this but I have a question:
Is this rom for sofia or sofiar? The title of the post says sofia but the download link says sofiar.
which is it? I have the U.S. retail version of the Moto G Power, which is sofia.

classic757 said:
I would like to try this but I have a question:
Is this rom for sofia or sofiar? The title of the post says sofia but the download link says sofiar.
which is it? I have the U.S. retail version of the Moto G Power, which is sofia.
Click to expand...
Click to collapse
Yes it should work,
In the title it shows rav*/sofia* for wildcards meaning any rav*, or sofia* device

AbsoluteZeroEdge said:
Yes it should work,
In the title it shows rav*/sofia* for wildcards meaning any rav*, or sofia* device
Click to expand...
Click to collapse
Okay thank you. If I give it a try I will let you know how it goes.

I originally installed Beetle84's Havoc Rom, which he/she no longer supports, on my Moto G Power 2020 XT2041-4 using FlashbootD, but, soon, my battery life diminished until it barely lasted a day. So, I tried to flash the new Lineage 18.1, but it failed and I had to Rescue my device. It's now running the stock Android 11 (A!11) Rom. Other Cooks have suggested that I can't flash another Rom until I downgrade the device to A10, which I haven't been able to do. I wanted to try Vache's Moto Flash Tool, but I can't find instructions online. Do I have to downgrade to A10 to flash this Rom? If not, can I just follow the above instructions which are similar to Beetle84's instructions I successfully followed when I flashed his Havoc A11 Rom? Also, how does this Rom compare to Havoc?
Thanks

jhford said:
I originally installed Beetle84's Havoc Rom, which he/she no longer supports, on my Moto G Power 2020 XT2041-4 using FlashbootD, but, soon, my battery life diminished until it barely lasted a day. So, I tried to flash the new Lineage 18.1, but it failed and I had to Rescue my device. It's now running the stock Android 11 (A!11) Rom. Other Cooks have suggested that I can't flash another Rom until I downgrade the device to A10, which I haven't been able to do. I wanted to try Vache's Moto Flash Tool, but I can't find instructions online. Do I have to downgrade to A10 to flash this Rom? If not, can I just follow the above instructions which are similar to Beetle84's instructions I successfully followed when I flashed his Havoc A11 Rom? Also, how does this Rom compare to Havoc?
Thanks
Click to expand...
Click to collapse
unfortunately yes you have to downgrade to a10 for the rom to boot
for downgrade instructions it's rather self explanatory. just drop ur stock 10 firmware zip in the firmware folder and start the flash
after u downgraded just use the installation guide above
And for how it compares, Not sure. It's basically AOSP but with google apps, It's like havoc but more bare and made for pixel fans that want the pure pixel experience
if u want more features I would definitely point u towards ph4n70m's havoc build

AbsoluteZeroEdge said:
unfortunately yes you have to downgrade to a10 for the rom to boot
for downgrade instructions it's rather self explanatory. just drop ur stock 10 firmware zip in the firmware folder and start the flash
after u downgraded just use the installation guide above
And for how it compares, Not sure. It's basically AOSP but with google apps, It's like havoc but more bare and made for pixel fans that want the pure pixel experience
if u want more features I would definitely point u towards ph4n70m's havoc build
Click to expand...
Click to collapse
Thank you, but I don't understand this: "just drop ur stock 10 firmware zip in the firmware folder and start the flash." So, can you please give me specific downgrade instructions. I've tried and failed at least 6 times.

jhford said:
Thank you, but I don't understand this: "just drop ur stock 10 firmware zip in the firmware folder and start the flash." So, can you please give me specific downgrade instructions. I've tried and failed at least 6 times.
Click to expand...
Click to collapse
Well, in moto flash tool's root directory it has a firmware folder to place your device's stock firmware for it to flash, after that is done open up the tool and select the stock 10 package u placed

AbsoluteZeroEdge said:
Well, in moto flash tool's root directory it has a firmware folder to place your device's stock firmware for it to flash, after that is done open up the tool and select the stock 10 package u placed
Click to expand...
Click to collapse
I have done that both zipped and unzipped several times and it has always failed. Maybe I downloaded the wrong firmware. I got it from lolinet. Do you have a link for the correct A10 firmware for Moto G Power 2020 XT2041-4?
BTW, since I'm now stock A11, I used Nova Launcher v6.x - new.version 7.x is incompatible with many of my widgets - today.to make the UI look identical to my rooted and rommed Nexus 7 2013 deb tablets, and it's pretty livable. Plus, Android Auto now works perfectly and never did when the phone was rooted and rommed. Food for thought.
[Edit] I flashed Vache's TWRP. I'd be pretty happy if I could make a Nandroid backup of my current stock setup. Have you done that?
Thanks again

jhford said:
I have done that both zipped and unzipped several times and it has always failed. Maybe I downloaded the wrong firmware. I got it from lolinet. Do you have a link for the correct A10 firmware for Moto G Power 2020 XT2041-4?
BTW, since I'm now stock A11, I used Nova Launcher v6.x - new.version 7.x is incompatible with many of my widgets - today.to make the UI look identical to my rooted and rommed Nexus 7 2013 deb tablets, and it's pretty livable. Plus, Android Auto now works perfectly and never did when the phone was rooted and rommed. Food for thought.
[Edit] I flashed Vache's TWRP. I'd be pretty happy if I could make a Nandroid backup of my current stock setup. Have you done that?
Thanks again
Click to expand...
Click to collapse
What's Moto Flash Tool's output? And I can't really decide the correct firmware for you phone, u need to see what software channel your phone is and select it here: https://mirrors.lolinet.com/firmware/motorola/sofia/official/
for nandroid backup well I'm not really sure, haven't done one before. a quick google search should do something for you.

AbsoluteZeroEdge said:
What's Moto Flash Tool's output? And I can't really decide the correct firmware for you phone, u need to see what software channel your phone is and select it here: https://mirrors.lolinet.com/firmware/motorola/sofia/official/
for nandroid backup well I'm not really sure, haven't done one before. a quick google search should do something for you.
Click to expand...
Click to collapse
Here's how I used Moto Flash Tool (MFT). Pasted A10 firmware in firmware folder. Connected phone in bootloader mode. Double clicked the MFT exe. A blank DOS window popped up and disappeared. That's it.

jhford said:
Here's how I used Moto Flash Tool (MFT). Pasted A10 firmware in firmware folder. Connected phone in bootloader mode. Double clicked the MFT exe. A blank DOS window popped up and disappeared. That's it.
Click to expand...
Click to collapse
make sure it's in a path with no spaces, i recommend putting it in a folder with of course no spaces again on any drive's root

AbsoluteZeroEdge said:
make sure it's in a path with no spaces, i recommend putting it in a folder with of course no spaces again on any drive's root
Click to expand...
Click to collapse
I followed you suggestion and only moved the folder to the root of C:\ that hosts the exe and the firmware, etc. folders. I double clicked the exe and for the first time, a usable batch file DOS window opened. So, it appears that I have a working setup. However, I'm going to think about rooting/romming this phone again, because I don't want to lose Android Auto (AA) again. But AA only works with a USB wired connection in my car, and I ordered an AAWireless device which should obviate the wired connection and allow my rooted/rommed phone to connect. I'll test it, and, if so, I'll flash your Rom Immediately.
Thanks for putting up with me.

I flashed this rom to my retail Moto G Power (2020) that was purchased from Google Fi. I make it to the Google logo screen on boot and it just sits there with the progress bar perpetually scrolling. Any advice?

NobleX13 said:
I flashed this rom to my retail Moto G Power (2020) that was purchased from Google Fi. I make it to the Google logo screen on boot and it just sits there with the progress bar perpetually scrolling. Any advice?
Click to expand...
Click to collapse
First boot usually takes a while, if it hasn't booted within 10 minutes it's stuck. Make sure you did a Format and not only a Wipe as well

Thanks. Upon further inspection when I executed a fastboot -w it wiped the data partition but did not format it. I'll try this again as time permits.
AbsoluteZeroEdge said:
First boot usually takes a while, if it hasn't booted within 10 minutes it's stuck. Make sure you did a Format and not only a Wipe as well
Click to expand...
Click to collapse

NobleX13 said:
Thanks. Upon further inspection when I executed a fastboot -w it wiped the data partition but did not format it. I'll try this again as time permits.
Click to expand...
Click to collapse
Yeah, fastboot -w usually has problems. Good luck!

Development [CLOSED][ABANDONED] [OFFICIAL] [Rosemary/Secret/Maltose] Project Kasumi 1.x for Redmi Note 10S

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Another weebified custom ROM aiming to be a home for weebs - Based on Project Materium, an optimized LineageOS-based Android aftermarket firmware with extra features, developed by people all over the world.
Quoting the LineageOS description:
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Click to expand...
Click to collapse
We offer vanilla, GApps and AuroraOSS variants. If you install a vanilla variant, the only supported GApps package is MindTheGapps (GApps/AuroraOSS builds are not available for a few devices due to space issues).
Download & instructions:
Install MIUI 12.5 if you have updated to anything Android 12.
Fully install custom recovery of your choice.
Flash the ROM. You can also sideload it with ADB if you want to.
!!! If you'll flash Magisk, you'll need to enable "Reflash (recovery) after installing a ROM" after choosing the ZIP as well !!!
After flashing, reboot to recovery.
Format data.
Flash Magisk if you want to.
Reboot to system and enjoy!
Download (Taken down due to discontinuation)
IMPORTANT: If you are coming from another ROM, you need to format data (TWRP > Wipe > Format Data > *type "yes"*).
IMPORTANT: If you want to keep Magisk after each OTA, you need to make it flash to inactive slot **right before rebooting** (Magisk > Install (In "Magisk" card) > Install to inactive slot)
About:
Features:
Latest security patches merged from LineageOS
SafetyNet passing unconditionally without Magisk/with kdrag0n's SafetyNet fix
Many optimizations coming from Stellar OS/Project Materium/droid-ng
New wallpapers & bootanimation
QS customization (tint, rows customizer, data usage)
Status bar customization (4G/LTE toggle, new NFC & VoLTE icons)
Kill app from notification
Notification pulse
KitKat-style notification ticker
Screenshot sound toggle
Per-app volume
WiFi & Bluetooth timeout
Smart Charging & Cutoff
Sensor, Wakelock and Alarm blocker
Battery info on lockscreen
Improved microG support (signature spoofing, location support)
...and more! (We accept suggestions!)
What's working:
Almost everything
Bugs:
Microphone doesn't work when speaker is enabled during calls.
You tell me.
Sources are available at https://github.com/ProjectKasumi and https://github.com/Kasumi-Devices
Full list of device sources used;
Device tree
Linux kernel tree used
Vendor tree for proprietary blobs
ROM Founded By: Yuki (AITEx64)
ROM Developed By: Beru Hinode
ROM Designed By: Ayuko, Qirkl and UsiF.
ROM OS Version: 1.3 "PoPiPa" R2
ROM Kernel: Customized Linux 4.14.186 from MiCode
ROM Firmware Required: MIUI 12.5.16.0.RKLMIXM (Global)
Based On: Project Materium 1.0 (LineageOS 18.1)
Version Information
Status: Discontinued
Last Stable Version: 1.4 "PoPiPa"
SELinux Status: Permissive
Initial Release Date: July 20, 2022

poggers! atleast some buildbot didn't post it this time

J6idot said:
poggers! atleast some buildbot didn't post it this time
Click to expand...
Click to collapse
It wasn't even their build, they just took my build and posted it away! XD

Let's goo. Very awesome work here

Amazing work!! Im a little disapointed with the note 10s
Hope to get the most out of it with a costum rom!
Miui on the 10s is a complete disaster... What the hell happened...

solidamage said:
Amazing work!! Im a little disapointed with the note 10s
Hope to get the most out of it with a costum rom!
Miui on the 10s is a complete disaster... What the hell happened...
Click to expand...
Click to collapse
I could never get used to MIUI myself so I feel you. For custom ROMs, there are quite a lot built (buildbotted) with practically the same bugs as well; you can check them out in respective Telegram groups/channels!

Hey there,
First of all, thx for bringing this
what about fast charging in these?
Would it work as expected?
Or as in every other GSI custom build i tested it doesn't work, and was kinda disappointing :/
Will the fix module be merged in the rom, making possible the avoid of magisk installing? Actually don't Care bout su and want m'y banking app to work
Hope to get your opinion soon

i followed the instructions to flash it down to the letter but cannot get it to boot. the phone will show the kasumi logo for a couple of minutes then just boots to fastboot. i am using orangefox recovery if that helps.

nintendobuster420 said:
i followed the instructions to flash it down to the letter but cannot get it to boot. the phone will show the kasumi logo for a couple of minutes then just boots to fastboot. i am using orangefox recovery if that helps.
Click to expand...
Click to collapse
It happens to me too ... Any advice?

Is this available on Android 12?

nintendobuster420 said:
i followed the instructions to flash it down to the letter but cannot get it to boot. the phone will show the kasumi logo for a couple of minutes then just boots to fastboot. i am using orangefox recovery if that helps.
Click to expand...
Click to collapse
Are you coming from 12.5.16 GLOBAL?
Do you format data before restarting?

Oxydeme said:
Are you coming from 12.5.16 GLOBAL?
Do you format data before restarting?
Click to expand...
Click to collapse
yup did all the steps in the thread

nintendobuster420 said:
yup did all the steps in the thread
Click to expand...
Click to collapse
Please, could you describe exactly the step you did?
As I didn't yet reinstalled all my apps, gonna try it out,
So i'll do as OP said to flash, probably tonight.
Are you really sure to come from Global version?
Have you tried with TWRP from Woomy?
All my previous tests were made with TWRP and appart i sometimes forget to format data After flash, once i did, it worked

Oxydeme said:
Please, could you describe exactly the step you did?
As I didn't yet reinstalled all my apps, gonna try it out,
So i'll do as OP said to flash, probably tonight.
Are you really sure to come from Global version?
Have you tried with TWRP from Woomy?
All my previous tests were made with TWRP and appart i sometimes forget to format data After flash, once i did, it worked
Click to expand...
Click to collapse
first I installed MIUI 12.5.16 global and completely erased the phone it had MIUI 13 before
then I installed orangefox by woomy
then I switched to slot B and installed the rom (gapps variant) also enabled reflash orangefox after installing rom
after installing I formatted data and installed magisk
then i rebooted and it bootlooped
i have a rosemary 10s with nfc

nintendobuster420 said:
first I installed MIUI 12.5.16 global and completely erased the phone it had MIUI 13 before
then I installed orangefox by woomy
then I switched to slot B and installed the rom (gapps variant) also enabled reflash orangefox after installing rom
after installing I formatted data and installed magisk
then i rebooted and it bootlooped
i have a rosemary 10s with nfc
Click to expand...
Click to collapse
Did you installed Magisk into the right slot?
@windowz414 is there any kind of vbmeta file to flash in order to be sure it would boot? An alternative boot IMG maybe? Or even a check disabler?
@nintendobuster420 finally gonna try flash tomorrow,
Did smtg else this evening, worked on a project, that isn't related at all to Android flashing x)
I also got a RN10S with NFC, maybe something related to variants?
Edit1: gonna try flashing Kasumi 1.3 PoPiPa Auroraoos 20220721; will update the post soon
Edit2: Kasumi auroraoos bootloop actually, reflashed auroraoos boot.img still bootlooping;
Gonna try with Kasumi classic, latest build to see
Edit3: Kasumi official 20220721 boolooping as well
Edit4: Will do a last attempt with Kasumi 20220716
Last attempt worked, I successfully booted up Kasumi, but with several differences
1- Backed up Pics and other important things for me;
2- Unlocked BL - Mi Unlock BL Tool latest version;
3- Switched Rom from 12.5.18EU to 12.5.16G with Mi Flash version 2018.5.28.0 (select fastboot rom, refresh, clean all, flash);
4- Booted once to get system settled
5- Installed TWRP from Womymy, booted on it
6- Switched Slot to B, Reflashed current recovery and rebooted from inside TWRP
NO I didn't, I switched to Slot B, reflashed recovery, got plenty errors, didn't rebooted in the end.
7- MTP mounted Storage and passed the zip rom
8- Flashed Kasumi, flashed again TWRP with the toggler while flashing rom, then directly formated format data,
9- Booted rom successfully!
still no fast charge, will keep it tough
@windowz414
Well done porting LOS dude!
Completely debloated
But still 13Go system
Little problem on CPU info
Battery seems good, phone is responsive, all the things that can be tweaked my god , bushido! Notification makes me smile
One word, net!
@HistoriaXV @nintendobuster420 hope you could success flash in the next days

Oxydeme said:
Hey there,
First of all, thx for bringing this
what about fast charging in these?
Would it work as expected?
Or as in every other GSI custom build i tested it doesn't work, and was kinda disappointing :/
Will the fix module be merged in the rom, making possible the avoid of magisk installing? Actually don't Care bout su and want m'y banking app to work
Hope to get your opinion soon
Click to expand...
Click to collapse
System reports "Charging slowly" but my battery fully charges from ~10% in just 1.5~2 hours.

nintendobuster420 said:
i followed the instructions to flash it down to the letter but cannot get it to boot. the phone will show the kasumi logo for a couple of minutes then just boots to fastboot. i am using orangefox recovery if that helps.
Click to expand...
Click to collapse
I have recently pushed a boot fix about this, you can flash it and format data to get it fixed.

Oxydeme said:
Please, could you describe exactly the step you did?
As I didn't yet reinstalled all my apps, gonna try it out,
So i'll do as OP said to flash, probably tonight.
Are you really sure to come from Global version?
Have you tried with TWRP from Woomy?
All my previous tests were made with TWRP and appart i sometimes forget to format data After flash, once i did, it worked
Click to expand...
Click to collapse
I use the OFOX from Woomy and it works with it too, so it's not recovery fault.
You mentioned firmware requirement there, good shot! Glad to see someone that's not from the development team finally noticing it!

Oxydeme said:
Did you installed Magisk into the right slot?
@windowz414 is there any kind of vbmeta file to flash in order to be sure it would boot? An alternative boot IMG maybe? Or even a check disabler?
Click to expand...
Click to collapse
The vbmeta required is shipped along with the ZIP itself, so whether if you disable it or not, you can always keep verity enabled AS LONG AS YOU DON'T MODIFY ANYTHING INCLUDING INSTALLATION OF TWRP. The boot problem was due to some missing permissions required with Lawnchair 12.0, which was platform-specific issue. I have mitigated it as the lead developer of Kasumi and now just waiting for LineageOS to merge August '22 ASB on their Lineage 18.1 branches to ship newer builds. Until then, I have placed a little flashable that you can slap in on the recovery. It's global (means will work on all devices with latest Kasumi build installed). In fact, all it does is just putting the new permission XML file.
Oxydeme said:
@nintendobuster420 finally gonna try flash tomorrow,
Did smtg else this evening, worked on a project, that isn't related at all to Android flashing x)
I also got a RN10S with NFC, maybe something related to variants?
Click to expand...
Click to collapse
Not at all. Even though I have Secret, everything should be around the same across all variants, given that Woomy also tested it only for NFC during initial bringup before.
Oxydeme said:
Edit1: gonna try flashing Kasumi 1.3 PoPiPa Auroraoos 20220721; will update the post soon
Edit2: Kasumi auroraoos bootloop actually, reflashed auroraoos boot.img still bootlooping;
Gonna try with Kasumi classic, latest build to see
Edit3: Kasumi official 20220721 boolooping as well
Edit4: Will do a last attempt with Kasumi 20220716
Last attempt worked, I successfully booted up Kasumi, but with several differences
1- Backed up Pics and other important things for me;
2- Unlocked BL - Mi Unlock BL Tool latest version;
3- Switched Rom from 12.5.18EU to 12.5.16G with Mi Flash version 2018.5.28.0 (select fastboot rom, refresh, clean all, flash);
4- Booted once to get system settled
5- Installed TWRP from Womymy, booted on it
6- Switched Slot to B, Reflashed current recovery and rebooted from inside TWRP
NO I didn't, I switched to Slot B, reflashed recovery, got plenty errors, didn't rebooted in the end.
7- MTP mounted Storage and passed the zip rom
8- Flashed Kasumi, flashed again TWRP with the toggler while flashing rom, then directly formated format data,
9- Booted rom successfully!
Click to expand...
Click to collapse
The dedication and the hassle... My God, it's just pure inspiration to me. XD
Oxydeme said:
still no fast charge, will keep it tough
Click to expand...
Click to collapse
As I said previously, it's what system reports presumably due to some SEL denials. I tried to get as many as possible sorted out, still no luck. But just as a fact, it actually is fast charging.
Oxydeme said:
@windowz414
Well done porting LOS dude!
Completely debloated
But still 13Go system
Little problem on CPU info
Battery seems good, phone is responsive, all the things that can be tweaked my god , bushido! Notification makes me smile
One word, net!
Click to expand...
Click to collapse
Well, thank you I guess. ^^;
Before I begin with replies to these, just referring to "dude", I'm a girl so I would prefer you calling me with "dudess" or "dudette" instead. Again, all up to you. No forces here.
The debloat is rather Lineage talent, I really just based on Materium and added things on top.
That 13 GB system partition is something that's coming from partition values from source, so whatever you do unless you flash GSI, it will always be 13 GB. See GitHub:Kasumi-Devices/[email protected]/BoardConfig.mk (Partitions section, BOARD_SYSTEMIMAGE_PARTITION_SIZE flag) for more info.
Eh, I still can't find a way to get CPU info properly, I guess it's related to kernel? Unsure though.
And some more tweaks will come as well, just stay tight! I'm working hard on another update! ;3

Sambit0789 said:
Is this available on Android 12?
Click to expand...
Click to collapse
Unfortunately no. Kasumi 1.x.x are all Android 11. Android 12 Kasumi will be possible only once our internal tests will be done and I finally finish working on Kasumi v2. Hundreds hyped, gradually widening audience, looking into the release of it. xD