Ota won't work - Xiaomi Black Shark Helo Questions & Answers

Hello
I got a Black Shark (SKR-H0) I did a factory reset, but now it won't upgrade anymore.
When I look if there are updates it says there is a update. I downloaded it then it says it is updating. But when it is done it hasn't updated.
Is there any way to update it?

Related

[Q] Custom ROM - 'We want ICS' OTA?

There was a system update yesterday but I didnt know whether to flash it. It was a mere 5.36 MB so I decided to flash it anyway. The phone rebooted and took me straight to the android exclamation screen and stayed there for a while. I had to hard reset my phone in order to get it up. No problem since then but when I checked for software updates again in settings it shows me that an install is pending. Do I install it again. Anyone else faced a similar issue? Also how did I get this OTA. Obviously I am on a custom ROM and it clearly shows OTAs disabled in the final update as shown in the link below
http://forum.xda-developers.com/showthread.php?t=1686583
OTA is not disabled in the v3 rom, I also I have received the update, is an official update one S which is the basis of the nik ROM when flashing the update that damages everything so you do not have to do

How to get back OTA update on N7 2012 mobile

Hi all, yesterday i got an ota notification for 5.1 on my N7 2012 mobile version, but coz i rooted before, the update was not successful. I tried to make a search in the internet for the download but strangely, there is no image uploaded for nakasig over there. Now i already did a full clean install on 5.0.2, and tried to push Check for update many times, but no ota ever happened again. How can i get it back? Anyone knows it, pls let me know. Many thanks!
Also in exactly the same boat. Fresh install of 5.0.2 on N7 2012, rooted. OTA update to 5.1 fails every time. Any advice?
The OTA will fail if you use a custom recovery (twrp or cwm). If you fastboot flash the stock recovery image, the OTA should work. The factory image is available for the wifi version, so you could update to 5.1 using it with fastboot. I don't know if the mobile factory image version has been released, but if not, it should be soon.

[Q] Moto X XT1092: 5.0.2 System update getting failed.

I am not sure why it is happening with but i am not able to install 5.0.1 (12 MB) update on my Moto X 2014. I have unlocked bootloader and phone is rooted running on 5.0 Lollipop firmware.
Baseband Version:
MSM8974BP_4125.184.08.27.01R
VICTARA_EMEA_CUST
System Version
22.21.19.victara_reteu.retailuall.en.EU retin
It downloads the update file.
Reboot the device.
Goes into recovery and show me that it's installing the update. Half way on the progress bar the phone reboots.
After booting I see message which tells me that System update installation is failed. It does not give an error message or reason.
I tried installing it multiple times but same results. Any help will be appreciated.
To add Motorola Device Software updater shows me that my firmware doesn't have any available updates. Whereas i am getting regular notifications to run system update.
I attached screenshot of Motorola Device Software updater.
You should be happy, i had exact same config, and had soft brick when trying to upgrade. I believe you can't do the update if you are rooted. So you must flash stock back and then update.
Sent from my XT1092 using Tapatalk
remma said:
You should be happy, i had exact same config, and had soft brick when trying to upgrade. I believe you can't do the update if you are rooted. So you must flash stock back and then update.
Sent from my XT1092 using Tapatalk
Click to expand...
Click to collapse
My phone keeps displaying that i have pending system update. What is the right way to get the update without bricking your phone?
After your update i am not going to try any workaround methods to force upgrade. But this is something that should be well explained by Motorola or Android community somewhere on internet. I think need to wait till the time more helpful resources are available.
gaggid said:
My phone keeps displaying that i have pending system update. What is the right way to get the update without bricking your phone?
After your update i am not going to try any workaround methods to force upgrade. But this is something that should be well explained by Motorola or Android community somewhere on internet. I think need to wait till the time more helpful resources are available.
Click to expand...
Click to collapse
i think just flashing back the stock system partition using fastbot should do it. I haven't done this myself though, i needed to completely reflash stock
gaggid said:
To add Motorola Device Software updater shows me that my firmware doesn't have any available updates. Whereas i am getting regular notifications to run system update.
I attached screenshot of Motorola Device Software updater.
Click to expand...
Click to collapse
I am facing the exact same problem.
I am currently on 22.21.19.victara_reteu.retailuall.en.EU and the update notification I am getting is for 22.121.1
I have an unlocked bootloader but the phone is not rooted.
I do not agree that OTA update doesn't work when phone has an unlocked bootloader and is rooted. The Android 5.0 update got installed on my phone when it was already rooted (I lost root access after the update).
Still looking for solution for "OTA installation failed" problem though...
gaggid said:
I am not sure why it is happening with but i am not able to install 5.0.1 (12 MB) update on my Moto X 2014. I have unlocked bootloader and phone is rooted running on 5.0 Lollipop firmware.
Baseband Version:
MSM8974BP_4125.184.08.27.01R
VICTARA_EMEA_CUST
System Version
22.21.19.victara_reteu.retailuall.en.EU retin
It downloads the update file.
Reboot the device.
Goes into recovery and show me that it's installing the update. Half way on the progress bar the phone reboots.
After booting I see message which tells me that System update installation is failed. It does not give an error message or reason.
I tried installing it multiple times but same results. Any help will be appreciated.
Click to expand...
Click to collapse
please post link of xt1092 5.0.2 en.EU ota zip (+/-12MB) tnx
Please for the love of god be a legend and post a link of this OTA i cannot find it anywhere! Copy paste it off of your phone when it downloads and upload it to dropbox or something. Please. Without this I cannot update to 5.1 :'(
aleckz999 said:
Please for the love of god be a legend and post a link of this OTA i cannot find it anywhere! Copy paste it off of your phone when it downloads and upload it to dropbox or something. Please. Without this I cannot update to 5.1 :'(
Click to expand...
Click to collapse
So far My 5.0.1 update never got downloaded and i was not able to update the phone using Motorola update. Therefore i flashed Cyanogenmod 12.1 which has latest Android build. This way i stopped annoying alerts of system update on my phone.

Failed updating to 23.21.44.en.US

I have a rooted turbo. I wanted to update to the new system and then unlock the phone (I read I had to be on the latest version to unlock, is that true?). The update keeps failing. I have tried several times, including doing a factory reset to try, but the update keeps failing. Does anyone have any help/direction on getting the update pushed through?
The pictures attached shows the current phone information and the failed update.
JON123123 said:
I have a rooted turbo. I wanted to update to the new system and then unlock the phone (I read I had to be on the latest version to unlock, is that true?). The update keeps failing. I have tried several times, including doing a factory reset to try, but the update keeps failing. Does anyone have any help/direction on getting the update pushed through?
The pictures attached shows the current phone information and the failed update.
Click to expand...
Click to collapse
Edit: Deleted
JON123123 said:
I have a rooted turbo. I wanted to update to the new system and then unlock the phone (I read I had to be on the latest version to unlock, is that true?). The update keeps failing. I have tried several times, including doing a factory reset to try, but the update keeps failing. Does anyone have any help/direction on getting the update pushed through?
The pictures attached shows the current phone information and the failed update.
Click to expand...
Click to collapse
Phones that are rooted cannot take OTA updates. You have 3 options:
1. Use Fastboot to flash the stock system image of whatever firmware you're on, then take the OTA.
2. Use Fastboot to flash every image contained in the full SU4TL-44 firmware and perform a factory reset.
3. Plug your phone into a PC and install the Verizon Upgrade Assistant that pops up. Accept the upgrade to SU4TL-44.

[HELP NEEDED] PRA-LX1C432B170 currently, no update found after debranding

Hi all,
I have a PRA-LX1 that had a Vodafone customization. The suddendly it just factory resetted itself (I SWEAR, I had it in my pocket) only to find it with a NRD90M firmware. Sick of this customization, I unlocked the bootloader and flashed a C432 oeminfo. I then tried to flash PRA-LX1C432B212 downloaded via FirmwareFinder, but went in bootloop. Well, no panic: fired up eRecovery, it installs PRA-LX1C432B170. I installed it and after the factory reset I now have a working phone. My only question is: is B170 really the latest available version I can get via OTA? I'd like not to lose the OTA feature so I don't have to rely on Firmware Finder to get updates every time... is there anything I can do?
A slightly related question: one thing I tried is to download B212 with FirmwareFinder. I managed to use the in-app proxy and actually found an update, but once it downloaded it didn't apply because of some failed verification (I don't have the phone with me now, but it was something AFTER the integrity check, so it's not something related to the download. I also verified the availability of B212 in FF by clicking the "Check Firmware Access" button and it's actually not available, like any other version I tried. Does this mean I won't get any OTA in the future?
Here is a discussion, probably related to your problem. Are you using TWRP Recovery when installing the OTA update or the stock recovery?
I read somewhere that Huawei OTA updates won't install on custom recoveries.

Categories

Resources