Related
Changes¬The video recording in the camera has been fixed (so far ha1, without camera2api - hal3, as it should be at 7, because the proprietary of 6, the third party also works)!
¬Fixed voice recording in recorders and instant messengers
¬New Nosgoth 3.18.31 kernel is used (by Anomalchik, I'm on the hook)
Bugs¬Hearing on calls with active pop-up notifications (disinfected in settings - screen - pop-up notifications)
¬Stock camera green on video recording in the dark
¬Small Battery Drain caused by System?!
The ROM won't be updated frequently so keep that in mind.
Download From GDrive
Installation
¬Go to TWRP
¬Wipe and then Click on Advanced Wipe
¬Check the followings if you want a clean Installation:
[*]Davlik Cache,
[*]Cache,
[*]Data,
[*]System
¬Go back and click on Install
¬Find the ROM in the destination you saved it and Install it
¬then Install the GAPPS which can be found here ARM64->7.1->pico(recommended)
¬Reboot and Proceed
Kernel source: https://github.com/anomalchik/android_kernel_xiaomi_msm8953
Contributors
Razziell
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.2.*
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-08-04
P.S. Made a thread cause none did, if Razziell does not approve it I'll take it down, We could also post it in Jacoghi's thread but none would update the thread, so I made one just in case.
All Credits go to @Razziell
wow another work by @Razziell ????
the rom overall so smooth no lags, but as mentioned above, the battery a little bit fast drain
mikey000 said:
the rom overall so smooth no lags, but as mentioned above, the battery a little bit fast drain
Click to expand...
Click to collapse
This problem is also present in CrDroid
Sent from my Redmi 4 Prime using XDA-Developers Legacy app
psykkuno said:
This problem is also present in CrDroid
Sent from my Redmi 4 Prime using XDA-Developers Legacy app
Click to expand...
Click to collapse
RR doesnt... strange...
thomasginn said:
RR doesnt... strange...
Click to expand...
Click to collapse
Yeah exactly that's strange cause RR uses the same sources.
psykkuno said:
Yeah exactly that's strange cause RR uses the same sources.
Click to expand...
Click to collapse
that what I was thinking... if they use the same sources, why doesn't work?
thomasginn said:
that what I was thinking... if they use the same sources, why doesn't work?
Click to expand...
Click to collapse
My guess would be changes in the System itself meaning that Razziell edits the RR first then applies the changes in LOS,CrDroid so maybe the code would be a lil different causing that bug to persist.
I have switced to this ROM and seems overall ok. But why there's no FP option??
I can't find Fingerprint settings anywhere. Can anybody help?
I've found a problem. Whenever I exit an app, music volume of connected bluetooth headset goes to high automatically. Haven't tested with 3.5mm earphone. Anybody found this problem too?
abhi281 said:
I have switced to this ROM and seems overall ok. But why there's no FP option??
I can't find Fingerprint settings anywhere. Can anybody help?
Click to expand...
Click to collapse
Hmmm did you clean install it?
kibria.mgk said:
I've found a problem. Whenever I exit an app, music volume of connected bluetooth headset goes to high automatically. Haven't tested with 3.5mm earphone. Anybody found this problem too?
Click to expand...
Click to collapse
I don't have a Bluetooth headset to reproduce it so... wait for others to confirm it.
psykkuno said:
Hmmm did you clean install it?
Click to expand...
Click to collapse
yes, clean install. btw problem is solved now. I have found FP settings after 3-4 random reboot of the phone. Don't know why it didn't come before. ROM is good, but missing extra customization options like RR or CrDroid.
abhi281 said:
yes, clean install. btw problem is solved now. I have found FP settings after 3-4 random reboot of the phone. Don't know why it didn't come before. ROM is good, but missing extra customization options like RR or CrDroid.
Click to expand...
Click to collapse
Heck I know what you're saying I could use Lineage but without a navbar it feels very weird.
There is an update version of this rom on 4PDA. Someone who wants the LOS can try that rom.
although i am using miui, but thank you so much！
Yes, that's @Razziell version from 28.08
Here is link: https://drive.google.com/file/d/0B_aCJyAhJEOxQmN4d1J3Ym10QW8/view
Here is the 4pda post.
https://4pda.ru/forum/index.php?showtopic=794653&st=5580
Doesn't look like much has changed from previous version?
Well I have been using it all morning. 100% smooth and no problems so far I'm happy to report, except the USB disconnect bug that this phone seems to have on every ROM except MIUI. Even advanced reboot working. Great job, @Razziell and I hope this last problem will get fixed sometime too!
DryEagle said:
Well I have been using it all morning. 100% smooth and no problems so far I'm happy to report, except the USB disconnect bug that this phone seems to have on every ROM except MIUI. Even advanced reboot working. Great job, @Razziell and I hope this last problem will get fixed sometime too!
Click to expand...
Click to collapse
Let's hope for official one day
TOOLS:
TWRP 3.1.1-0 https://drive.google.com/file/d/0B7E...E5aEhob2M/view
ROOT: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
DOWNLOAD:
08.09: https://drive.google.com/drive/folders/0B17qQbSTGvxtYmxZNUQzM0NfYkE
GAPPS: http://opengapps.org/ (choose ARM64 - 7.1 - pico)
BUGS:
Tried to translate, so here goes:
Since hal3 is active, there's gonna be a problem with camera using 3rd party apps.
Battery % stays at 100, to fix it, soft reboot your phone.
Sources from @Razziell and kernel by @Anomalchik.
SOURCE:
4pda: https://4pda.ru/forum/index.php?showtopic=794653&st=5840#entry64834189
Wow. Thanks
Screen shoot.?
hendy_ said:
Screen shoot.?
Click to expand...
Click to collapse
I didn't installed, but check some reviews on YT.
hendy_ said:
Screen shoot.?
Click to expand...
Click to collapse
Some screenshots...
I am using the rom, and found the items grouped very ugly, could change this.
BJumperBR said:
Some screenshots...
Click to expand...
Click to collapse
Thanks mate
just flash this rom & its awesome :good:
it has lots customization, & it has built in dark theme.
also its so fluid
Awesome ROM!! Just a question, is it normal that the calling UI becomes gray color every time? There is a way to change this? I actually try with the new Google dialer APK, but seems to have the same gray color always no matter what app I'm using for calls.
EDIT: Also is has the bar/line for the split view in blue color, when in all the others ROM it's black and here looks some weird. Is it normal? Or I have changed something?
Mangel79 said:
Awesome ROM!! Just a question, is it normal that the calling UI becomes gray color every time? There is a way to change this? I actually try with the new Google dialer APK, but seems to have the same gray color always no matter what app I'm using for calls.
EDIT: Also is has the bar/line for the split view in blue color, when in all the others ROM it's black and here looks some weird. Is it normal? Or I have changed something?
Click to expand...
Click to collapse
would be better if you provide screenshot of your problems
This is my battery result, i am using hrafninn RR kernel in this rom, 8 hours 43 minutes, estimated still powered untill 9h sot
Viper os + hrafninn RR kernel
mikey000 said:
Viper os + hrafninn RR kernel
Click to expand...
Click to collapse
How to have RR kernel?
N1ck474 said:
How to have RR kernel?
Click to expand...
Click to collapse
Just extract the RR rom by hrafninn, then you'll find boot.img file, all you have to do is just flash it via twrp
Shame this version is kind of outdated.
Hello everybody! I use this firmware ROM since its publication and noticed such a moment that I have never failed to fill the charging percentage by 100%, or when connecting a cable from a PC. On all other custom firmware Android 7.1 ... (well, except for closed versions) based on the sources from Razziell, I always had sticking. Like and source codes one, but the fact remains the fact. Does anyone else use this firmware and can confirm this or just me so lucky?
Legioner78 said:
Hello everybody! I use this firmware ROM since its publication and noticed such a moment that I have never failed to fill the charging percentage by 100%, or when connecting a cable from a PC. On all other custom firmware Android 7.1 ... (well, except for closed versions) based on the sources from Razziell, I always had sticking. Like and source codes one, but the fact remains the fact. Does anyone else use this firmware and can confirm this or just me so lucky?
Click to expand...
Click to collapse
confirmed, using this rom for 3 days, & i have no problem with battery stat while charging all works just fine
mikey000 said:
confirmed, using this rom for 3 days, & i have no problem with battery stat while charging all works just fine
Click to expand...
Click to collapse
Nice bro
any update forecast?
soon updates will not be,the source code ViperOS is closed
Hi Everyone
Since los15.1 was officially released our device kernel did not get any security update and was left with an outdated version (LOS15.1 at 3.18.76 & LOS16 at 3.18.120) while the latest update is (3.18.136)
The aim of this release to keep our kernel updated every time a new update is available.
Why Updating kernel to latest linux stable is important ?
Here is the good overview explaining why
The kernel is the same as LOS16 kernel (Ordin sources) with updated linux updates up to 3.18.136 so the performance , battery life , features , etc should be the same as los15/16.
The kernel was tested in both aosp android 8.1 & 9.0 so it should work in all custom ROMs
This kernel will also get rid of the "internal error .... " message when using none los/mokee vendors with GSI ROMs
Download
3.18.136
Instructions :
Flash the .zip in twrp then reboot
Credits
@OrdenKrieger
@Unjustified Dev
@SaintZ93
@nathanchance
Linux Stable Team
TG Testing Group
Kernel Source
Source
Thanks man!
Sorry friend, just flashed and my phone still boots with the error.
Liquid GSI latest
ibphantom said:
Sorry friend, just flashed and my phone still boots with the error.
Liquid GSI latest
Click to expand...
Click to collapse
That error is ROM problem, the kernel wont fix it
If you used other GSI ROMs or older build of liquid with nfound vendor you will get another message "internal error .. " that message will be fixed with this kernel
king1990 said:
That error is ROM problem, the kernel wont fix it
If you used other GSI ROMs or older build of liquid with nfound vendor you will get another message "internal message .. "
Click to expand...
Click to collapse
So... Do I need to go back to stock and then reflash the GSI to get rid of that?
ibphantom said:
So... Do I need to go back to stock and then reflash the GSI to get rid of that?
Click to expand...
Click to collapse
No you don't. It should be solved with next release of the ROM.
Thanks man! AEX 6.3 work good.
No issues with the latest DescendantOS. Thanks mate.
Doesnt work on aex5.7 oreo non treble
Thanks for this. Your work is greatly appreciated
Will this work with dotOS?
Predatorhaze said:
Doesnt work on aex5.7 oreo non treble
Click to expand...
Click to collapse
Never tried Non-treble ROM, will check back later
HTC55555 said:
Will this work with dotOS?
Click to expand...
Click to collapse
if it is non treble ROM then it might not work, you can try it
Can i use this updated kernel with the liquid remix gsi?
king1990 said:
on latest los16 it works but it have the cluster bug.I cant set minimal on 307mhz,it automaticly jumps back to 1036mhz
Click to expand...
Click to collapse
BaamAlex said:
Can i use this updated kernel with the liquid remix gsi?
Click to expand...
Click to collapse
Yes it should work
Predatorhaze said:
on latest los16 it works but it have the cluster bug.I cant set minimal on 307mhz,it automatically jumps back to 1036mhz
Click to expand...
Click to collapse
You don't need to change the minimum frequency , the minimum frequency and other governor parameters already defined in the vendor.
don't touch the screen and you can see the frequency will go back to the minimum value after few seconds for both cluster.
king1990 said:
Yes it should work
You don't need to change the minimum frequency , the minimum frequency and other governor parameters already defined in the vendor.
don't touch the screen and you can see the frequency will go back to the minimum value after few seconds for both cluster.
Click to expand...
Click to collapse
That is true,but on any touch the CPU goes to 1036mhz.That should not happen if I'm not wrong
Predatorhaze said:
That is true,but on any touch the CPU goes to 1036mhz.That should not happen if I'm not wrong
Click to expand...
Click to collapse
you are wrong.
Predatorhaze said:
That is true,but on any touch the CPU goes to 1036mhz.That should not happen if I'm not wrong
Click to expand...
Click to collapse
That because of the CPU input boost feature , if you want to customize interactive governor try to use AKT profiles, they have many profiles for battery, balanced & performance all should work fine with our SD820
atakan33 said:
you are wrong.
Click to expand...
Click to collapse
I deleted the perf folder from vendor and now it does not happen.
Now its not forced to 1036mhz on any single touch
Predatorhaze said:
I deleted the perf folder from vendor and now it does not happen.
Now its not forced to 1036mhz on any single touch
Click to expand...
Click to collapse
you should not do that , so if you get any problem it is not kernel issue
Who are we?YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
DownloadsMi A1Flashing ProcedureInstall Latest Custom Recovery (This is recommended)
Coming from a different rom / OS you'll need to clean flash:
1. Wipe data (Factory reset)
(1.1.) If coming from stock OS you may need to format internal storage
2. Flash rom
(2.1.) After Flashing rom Flash Twrp (dont reboot without installing it)
(2.2)After Flashing Twrp go back to main menu and go to Reboot menu and select Reboot to Recovery Again
(2.2)Flash Gapps (This Recommended) For Root We Suggest Use Magisk Canay Builds (check below for download link)
3. Rejoice
For dirty flash just skip step 1, 1.1
and possibly 2.1 if your mods support addon.d (ex: Magisk)
It does not matter when you flash the firmware zip, and you only need to flash it once per firmware version
XDA:DevDB Information
Yet another AOSP project, ROM for the Mi A1
Contributors
murtaza1326
Source Code: [url]https://github.com/yaap[/URL]
Device Tree: [url]https://github.com/yaap/device_xiaomi_tissot[/URL]
Common Device Tree: [url]https://github.com/yaap/device_xiaomi_msm8953-common[/URL]
Vendor Tree: [url]https://github.com/yaap/vendor_xiaomi[/URL]
Kernel Source Code: [url]https://github.com/yaap/kernel_xiaomi_tissot[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: v10.0.24.0 (Pie) (August)
Based On: AOSP
Version Information
Status: Alpha
Created 2020-09-20
Last Updated 2020-10-06
Working:
Camera/Video/Mic
Fingerprint
GPS
IMS (VoLTE)
RIL
Video playback
Wi-Fi
NightLight
CTS
Broken:
WFD
Bubbles
Switching back to wifi after using hotspot
(need to reboot to use wifi again)
Note: The ROM Does Not Include Gapps Feel Free to flash any gapps of your likings Nik Gapps are Recommended
For Root Magisk Canary Build(Compatible with R Only) is Working Fine This Works Perfectly (Do Not Update it)
Here
Credits Section
I am not alone to bring it up to you guys alone there are many many and many people who helped me to achive this
and i would like to mention them
First I would like to thanks
@abhinavagrd_1129 even tho me and him started bringing up trees differently he was always there to guide me
& i would like to tell you that his Aosp Beta 3 Rom Inspired me to try to bringup trees
@poad42 (Our Lead Dev of Project Yaap is the one who helped me alot to fix many bugs including the lags we were facing he pointed out fix to me
@SagarMakhar he is the one who fixed my noobish mistake i made everytime (also helped me to fix ril in the previous version)
@gotenksIN a guy who also stucked with his own bringup as well i was, we disscussed about bugs and different things together
@shivatejapeddi thanks to him VNDK29 issues were solved
@Lostark13 pointing and hinting me out for diffrent smaller things
Vince Device Devs (i picked there fixes thanks alot guys )
my mates in tissot maintainer TG group
also my testers ( i uslly do my own testing but at some point they helped me to too thanks alot guys)
if i miss anyone from the list do let me know :laugh:
New Changelogs :-
Code:
Device Side:-
Enforcing Now
CTS Passes Without Root(Tissot FP No More Pixel Props)
Fixed USB Teathering
Source Side:-
Merged Latest ASB (October)patch r5
Added Q/S Customisations
Added Clocks In Styles & wallpaper app
Added DT2W & DT2Sleep Gestures
Added Brightness Slider Customization
Added Custom Footer Text Support
Old Changelogs :-
Code:
Fixed Night Light
Fixed 3rd Party Apps Not Detecting Fingerprint
Fixed Wifi & Wifi Hotspot Toogle
Fixed CTS (With Root (No More Pixel Props Needed))
Xiaomi Parts Removed Vibration Controls Completly
Xiaomi Parts (New Adaptive Icons will match other android R icons)
Source side features will be added soon
Piru?
Congratulations ??
Harvey_Spectar said:
Piru
Congratulations ??
Click to expand...
Click to collapse
tnq sar
Good to See on 11 too..
Weww.. A11 going lit ??
Pro!!!! Nice work bruh!
Gawd
Sent from my Mi A1 using Tapatalk
What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions
sergiobh said:
What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions
Click to expand...
Click to collapse
sorry for inconvenience updated info
edit: i have added links for required firmware there shouldnt be a issue to find it somewhere else
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
?
KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
it could be different sensor like fpc ? i will see and i will fix it thanks for informing about magisk
KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.
murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Hello prosur!
KaaMyA said:
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.
Click to expand...
Click to collapse
You can still check which fingerprint sensor your device have
Takeshiro04 said:
You can still check which fingerprint sensor your device have
Click to expand...
Click to collapse
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.
KaaMyA said:
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.
Click to expand...
Click to collapse
Install Device info apk and check the fingerprint sensor
murtaza1326 said:
i need more details on your sensor type if you can provide me
Click to expand...
Click to collapse
Mr Magneto said:
Install Device info apk and check the fingerprint sensor
Click to expand...
Click to collapse
I have installed "Device Info HW" app and it tells that my sensor variant is "goodix".
DISCLAIMER
I am not responsible for bricked devices, dead SD or any damage made by this rom. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will just laugh at you!
I've put a huge amount of time and effort in this project. Enjoy it and if experience any bugs pls report it directly to me.
FEATURES
OneUI 2.0 ported from the SM-J600F
WITH TREBLE SUPPORT
- TWO UI 2.0
- Kernel ARES6.0 is included
- Highly Debloated
- Multi-Csc
-Stable Magisk Root
- Game Stuffs Working Fine
- Well Camera Features
- App Lock[ PATTERN, FINGERPRINT AND FACELOCK is available]
- Native ScreenRecording
- Dolby On-Speaker
- Dynamic Lockscreen Stories and Locscreen stories
- Tons of CSC Tweaks[like real time network speed,data icon on power menue,LTE icon and LTE only network mode etc]
- High Performance Mode with three resolutions(HD FHD and WQHD)
- Fingerprint & Facelock Working
-Latest Samsung ui, ringtone and notification sounds added
-Apps can be moved to SD-CARD
- play games smoothly even in Q
- And Many More...
KNOWN BUGS
-3rd party camera like footej[which uses Cam2api] wont run.
-Fm radio
DOWNLOAD
Link:CrypticOs/wowrom3.123
INSTALLATION:
-Need to flash repartition script if not have it already(system size 2.8 max) if have it, just Wipe system, data , vendor, dalvik cache and cache...
-As System is a part of treble, DO flash create vendor 2.0
-Flash Rom
-Reboot
-First boot may take several mins. so have patience.
Kernel Source:Here
SUPPORT
MY TG ACC (@GEMMIES_BJ)
Telegram group
https://t.me/wowgroupsupport
NOTICE:
ITS THE LAST RELEASE. Which means i wont be pushing roms Often or actually never.You guys can leave ISSUES faced with proper logs to me at TELEGRAM (@GEMMIES_BJ) i will later help u solve ISSUES/BUGS. THANKS...
CREDITS
Me, for infinite hours spent with this project
Special thanks to:
@Astrako for bt fix, repart script and cam patch. Huge respects to him without him no Q would be introduced in 7870.
@SPARTANICUS for his kernel who also deserves huge respect and really a great contributor of 7870 thru his amazing kernels.
@soulr344 TOTSUKA_OS for the root related fix.(Stable magisk). Also huge thanks to his contribution to 7870.
@ganeekusaa for helping me with csc related things wallpaper design and giving me tips and suggestions for making rom better.
-Samsung Mods t/g,Samsung and google.
DONATIONS
I dont need it. Donate money or simply help people who really need it. If you like this rom you can just show love by pushing THANKS[Like].
Nice rom!!!
Screenshot??
Maaaan
Finger print donut work g610f ☹☹☹☹
I need fix it how?
I'mFriendly said:
Nice rom!!!
Click to expand...
Click to collapse
Finger print work with u in g610f
H MOUD said:
Finger print work with u in g610f
Click to expand...
Click to collapse
The J6 where this rom was based on has the fingerprint sensor on the back while on the J7P the sensor is on the home button...
Wifi speed very slowly
Mightx said:
The J6 where this rom was based on has the fingerprint sensor on the back while on the J7P the sensor is on the home button...
Click to expand...
Click to collapse
When I want to put a fingerprint in my device, he gets out of it immediately. What is the solution to this problem? Face lock is working, but the fingerprint lock does not work
H MOUD said:
When I want to put a fingerprint in my device, he gets out of it immediately. What is the solution to this problem? Face lock is working, but the fingerprint lock does not work
Click to expand...
Click to collapse
Then don't use this ROM simple as that... Don't expect all ROMS to have all features work as expected....
it is the same as wow j6 final port .....
you only changed the name of the rom since it is the same as wow j6 final port .....
H MOUD said:
When I want to put a fingerprint in my device, he gets out of it immediately. What is the solution to this problem? Face lock is working, but the fingerprint lock does not work
Click to expand...
Click to collapse
I guess its fixed by Somedays earlier. You can check the Fixed version of The Rom. THANKS!
Padrino25 said:
you only changed the name of the rom since it is the same as wow j6 final port .....
Click to expand...
Click to collapse
Uhmmm.. Its more stable than the Previous version.
Bijaya Bhandari said:
I guess its fixed by Somedays earlier. You can check the Fixed version of The Rom. THANKS!
Click to expand...
Click to collapse
How can I check the update that has occurred on my software and ware .... Thanks for the note❤
Mightx said:
Then don't use this ROM simple as that... Don't expect all ROMS to have all features work as expected....
Click to expand...
Click to collapse
Didn't I understand you?
Mightx said:
The J6 where this rom was based on has the fingerprint sensor on the back while on the J7P the sensor is on the home button...
Click to expand...
Click to collapse
My friend should work because it is based on reading a fingerprint from anywhere, but he gets out of it when I want a position
Give me a way to install the software step by step, and you did not face any problems in all respects Thank you ❤❤
H MOUD said:
Give me a way to install the software step by step, and you did not face any problems in all respects Thank you ❤❤
Click to expand...
Click to collapse
It may very well be a rom bug then sadly since this ROM hasn't been tested well enough and the dev has no intentions for further development.... So that's why I suggest you switch roms....
H MOUD said:
How can I check the update that has occurred on my software and ware .... Thanks for the note❤
Click to expand...
Click to collapse
download the Rom again from the download link, new updated rom has been uploaded and fingerprint should work now.
Mightx said:
It may very well be a rom bug then sadly since this ROM hasn't been tested well enough and the dev has no intentions for further development.... So that's why I suggest you switch roms....
Click to expand...
Click to collapse
All love and many thanks