Related
OK, I'm guessing its not just me, but when my G1 is in my pocket, and I have the headphones connected(this only happens with the headphones in), it will randomly jump to different tracks, pause, stop, and pretty much be useless. I didn't have a clue my G1 could even do this, so how do I stop it? I genuinely had no idea what was happening until I started flicking my phone and realised it was controlled by the a motion sensor. It makes my music player pretty much useless though!
Thanks.
I am having the same problem. first Tmo rep replaced the phone thinking that the usb connection was compromised, but the same thing is happening with the replacement phone. tried several pair of headphones, and I have two adapters that both do it. Its the adapter. the wires must be cheap... its under HTC warranty, so the tmo rep is sending me another.
Yeah is a problem with your headphones if you got the phone before tmo started to include the adapters or the adapter if you just recently bought th ephone. I had it happen with the original headset I had and an adapter that i was using for a while. havent' had any trouble wth the new adapter that i have. My brother bought the phone and doesn't use the wired headset so he gave me his new headphones and now it works great.
I have the same problem both with my headphones and when using the 3 in 1 connector in my car, really frustrating, no issues with Tune Wiki but can't use that as the player will just randomly start anyway, tried 2 hard resets. Phone didn't do this for the 1st month or so, I don't see how it can be the connector.
Does it work?
I am new to this phone, however i tried turning the phone in all direction, plus shaking it, my music player would not change song. May i know is there a option to activate the motion sensor?
hazeline said:
I am new to this phone, however i tried turning the phone in all direction, plus shaking it, my music player would not change song. May i know is there a option to activate the motion sensor?
Click to expand...
Click to collapse
no. not untill someone develops an app that can handle using the motion sensor to change track, which i'm sure is very possible. It is not an option in the standard player, or any player available atm. (as far as i know)
I use to have a droid 2 and I used it with the car dock with out any problems at all, My car had the aux input for the audio cable from the dock, so when ever my phone would ring or I would make a call, it would go through the cars speakers, Ok so now I have the D3 and the new D3 car dock, same car. Here's the problem, when ever the phone is in the car dock and you place or receive a call, by default the phone switches to speaker phone, and when in speaker phone mode it will not play through the speakers, and yes I can just hit the speaker phone button on the dial pad to turn the speaker off and then it will play through the cars speakers but I really dont like having to do this every . time,I NEVER had to do this with my D2. I have tried other car dock apps to see if this would go away but it don't. Any help or thought would be great.
stephendowney said:
I use to have a droid 2 and I used it with the car dock with out any problems at all, My car had the aux input for the audio cable from the dock, so when ever my phone would ring or I would make a call, it would go through the cars speakers, Ok so now I have the D3 and the new D3 car dock, same car. Here's the problem, when ever the phone is in the car dock and you place or receive a call, by default the phone switches to speaker phone, and when in speaker phone mode it will not play through the speakers, and yes I can just hit the speaker phone button on the dial pad to turn the speaker off and then it will play through the cars speakers but I really dont like having to do this every . time,I NEVER had to do this with my D2. I have tried other car dock apps to see if this would go away but it don't. Any help or thought would be great.
Click to expand...
Click to collapse
Sorry man, but I've dug through and have not found any settings pertaining to that. It may be an automatic feature that has not been developed into an adjustable setting in Android 2.3.4 (Since its a new Car Dock App)
However, this may help you out.
http://ig88.cwfk.net/?page_id=96
It's a third party app that might work.
Actually, I think I found something pertaining to it.
In here: http://static.googleusercontent.com...lp/hc/pdfs/mobile/AndroidUsersGuide-2.3.4.pdf
On page 333.
Not sure yet if it applies to our Droid 3 completely, but it might. I don't have an AUX in port in my car to test it out at the moment.
Edit: It appears Motorola/Verizon left out the "Dock" settings under the general settings menu. Unless, it shows up when docked - idk yet.
If it doesn't, I'd try going into applications, "all" applications, select cardock or car home app, and clear data. This may restore the question that it supposedly asks you when you connect to the dock for the first time.
I found the problem and the solution.
Without any setting to change and all the apps I tried did not help, I decided to take a look at the dock and by that I mean take it apart and see whats going on inside. What I found was that where the usb car charger attached there was a circuit board, I am not an electronics guy but I figured that was whats causing the phone to automatic go in to speaker phone when connected to the dock, and I was right. That was the problem, and now for the solution, I had a car dock for a droid x handy so I took it apart as well, and I found that it did not have the circuit board, it was just a straight through put, from the usb connection on one end to the micro usb on the other end, the end that sticks up in the car dock that the phone connects to. So with a little bit of modification and I do mean little, I was able to swap them out, and now all is well again. Pretty ****ty that MOTO would do this and not give an option to change it in the setting though.
The phone rocks, but it does have some flaws. Right now I can't seem to pause and play without pressing the button on the headphones like 2 or 3 times. I tested out a few headphones that I know worked on my old Focus and my iPhone and they don't work consistently either.
I also tried the Focus S headphones on my iPhone and it works perfectly. Anyone experience this?
you know i have, i've been posting (*****ing) about this since sunday I'm suspecting a major flaw in the design of the jack itself, but we'll see. The next track/previous track doesn't seem to work at all, and the pause/play seems to take some manipulation to work
this happens to me as well, kind of really annoying, and really my only gripe with the phone.
I get a popping sound through the speakers in my car (AUX plug) when I change from track to track. I am using the same cord I used to use with my Focus and I've checked my Focus S in both of my cars that have an AUX input.
Has anyone else tried this?
Plug your phone into your car using a male-to-male 3.5 cord and play your music through it. When you change from one track to the next you'll hear a popping sound. It's much louder in my Lexus vs my Impala but it's obvious in both cars.
I am also having both the controller issue and the "popping" sound through the speakers of my car.
The volume buttons seem to work, but the play/pause button only works when I hold the button for a second or two before letting it go. Because you have to hold it for a second before it registers, you can't use it to go back or forward through songs. I tried the controller from my Venue Pro in the Focus S with the same results, so the problem is probably with the phone itself and not the controller.
Whenever I have an AUX cable plugged into my car with the engine on, I can here a loud whining noise that I assume is the cable acting as an antenna and picking up noise. When I plug in the DVP, it seems to sort of ground the cable and stop picking up noise even when music isn't playing. With the Focus S, the noise continues when the phone is plugged in and only stops when music is playing. During the short time between songs, music is not playing and there seems to be a sort of noise spike that makes a "popping" sound.
I suspect both of these problems are related and have to do with the jack as jmerrey suggests.
I have been having the same issues with both the Car playback and the controls on headsets. I really hope they fix this major flaw. This phone will go back if not.
Sent from my SGH-i937 using XDA Windows Phone 7 App
FYI I am using a stereo Bluetooth headset from Motorola and do not see any of the above issues.
Volume up/down, pause/play and skip forward and back all work as expected.
Sent from my Focus S using XDA Windows Phone 7 App
jfreiman said:
FYI I am using a stereo Bluetooth headset from Motorola and do not see any of the above issues.
Volume up/down, pause/play and skip forward and back all work as expected.
Sent from my Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
that's because the issue stems from the actual headphone jack, it's not a software or firmware problem, but a hardware issue.
Okay I figured out how to get the controller to work pretty much 100% of the time. You can't just press the button, you have to hold it down for about half a second for it to pause and play consistently. Any more or any less than half a second and it won't work. I've been doing this for pretty much the entire day and it seems to be working now. Little annoying that it works on a delayed press but its better than not working at all.
Yes, but you still don't get the double press for next track, or triple for previous track. I've been able to get the double press to work a few times, but that's it. I've also noticed that with aftermarket sets, like a beats headset, it's incredibly inconsistent. I really hope this is fixable with a software patch, but I'm not holding my breath.
Sent from my SGH-i937 using Board Express
I have only volume up on all type of press button.
anyone hear if this is going to be addressed or if it has been acknowledged?
thanks
I have the same problem with my Focus S. The volume buttons are working fine, the problem occurs only with the play / pause button.
If you want to play / pause you have to hold the button longer than just the usual
short click. If you know the trick it works most of the time for play / pause, switching songs with a double click is almost impossible and very hard to time.
I tried it with the original headset from my Focus S and with the Nokia purity all have the same problems.
I also tried the all headsets with my Lumia 800 and a Omnia W all working fine.
It seems to be a Focus S only problem, not sure if it is hardware or software related.
I'm on 8107 using 2103.11.10.1 Firmware would a hard reset solve the problem??
firmware issue
I have experienced all of these problems above and here are a few tips/fixes and ideas. First with the headset controller on the ear buds, I noticed if you press harder it picks it up easier. If you get it down just right you can time it for going forward and backwards. Still not a real fix. Its definitely the phone because it works on my focus, iPhone, and mac. Also, I think it may be firmware related because the popping occurs between songs for the aux cable in the car only when audio isn't playing, so I would assume it had something to do with the firmware, not the hardware. It distinctly gets quieter when music plays, even if the music is silent (just knowing something is playing is enough for it to shut up). Also I noticed that when I plug in my phone for battery, it connects, disconnects and then reconnects. I noticed this with the vibration (should only be once, actually is 2-3 times). And when battery is low you notice because you plug in, it disconnects and you get a notice of critically low battery, and then it connects. I think this may be the firmware that all the ports seem to turn on and off whenever given any form of stimulus (data or power sent through them).
The phone rocks The phone rocks
Tango and the new Samsung Firmware fixed this issue!!!
Now i can listen to my music how it is meant to be!!!
:victory::victory::victory:
i got tango, but no new firmware. Which update updated the firmware?
I got Tango, but I had to hard reset my Focus S to get the Firmwareupdate.
Maybe because I InterOP unlocked my Focus S, I'm not sure why it worked after a Hard Reset.
My Software is now:
OS: 7.10.8773.98
Firmware: 2103.12.05.2
yes but didnt the LE2 software update disable your ability to interop unlock your device?
if we can get the phone accept our own signed cabs we can extract the driver updates, fixes and patches and ignore the diagnostic tool updates that disable our interop unlock method.
in short make a backup BEFORE applying any samsung OEM updates, when you need to interop unlock again, you can revert to your pre OEM update, apply the interop unlock again, then re apply the OEM update. from what i gather you are best doing this every time you have an OS update as there have been issues with restoring backups that cross OS versions...
Oh course you lose any unbacked up txts etc, but i think the benifit outweighs the hassle.
Ikkari said:
Tango and the new Samsung Firmware fixed this issue!!!
Now i can listen to my music how it is meant to be!!!
:victory::victory::victory:
Click to expand...
Click to collapse
I got the firmware update, but it didn't fix my headphone issues. It is still incredibly unresponsive, and the annoying clicking that is head better via aux cable is still present. Anyone have the same issue?
Hello everyone! I picked up a Nexus 6 the other day, and I have ran into a very interesting audio problem with it. I like to use it in my car to listen to Spotify. However, for some reason, when I plug in the cable, it does not always detect that the cable is plugged in, and still outputs sound through the phone speakers. I originally thought this was the aux cable I was using, and I replaced it, but it was still happening. I was messing with it a bit more today and it seems that if I plug it in slowly, it will play out of my car just fine. However, if I plug it in normally, it is like it doesn't see the cable at all. This does not happen at all with other systems at all, be it other cars or home audio gear. It also does not happen with my deck and a different phone (I tested it with my old One M8). Currently, I am using SoundAbout to force it to output to the headphone jack before getting in the car, but this is getting to be a bit of a pain to remember to disable it each time I take my phone out. Has anyone else ran into a similar issue? Does anyone have any suggestions?
My phone seems to have touchy connection with the 3.5mm Jack. When I plug it in in my truck it won't hold a connection. If I'm using headphones when I bump the phone or set it down it pauses and if I tap the back near the top again it'll play. Sometimes with the cord in Google Now opens when the back gets tapped. I hear a small rattle around the area too. Not sure if it's related. Is this some stupid accessibility feature? Help? I just got this phone yesterday
smithy31698 said:
My phone seems to have touchy connection with the 3.5mm Jack. When I plug it in in my truck it won't hold a connection. If I'm using headphones when I bump the phone or set it down it pauses and if I tap the back near the top again it'll play. Sometimes with the cord in Google Now opens when the back gets tapped. I hear a small rattle around the area too. Not sure if it's related. Is this some stupid accessibility feature? Help? I just got this phone yesterday
Click to expand...
Click to collapse
I know this thread is kind of old but did you ever get this issue figured out? I'm experiencing the same thing. I even disabled the Google search app hoping it would fix it, and the Google voice search prompt no longer pops up, but it still pauses and skips tracks with any light bump (at least while using Spotify).
It's very annoying and even kind of dangerous that I have to keep messing with it while I drive. Thanks for your time.
Sent from my HTC Desire 626s using Tapatalk
Surj138 said:
I know this thread is kind of old but did you ever get this issue figured out? I'm experiencing the same thing. I even disabled the Google search app hoping it would fix it, and the Google voice search prompt no longer pops up, but it still pauses and skips tracks with any light bump (at least while using Spotify).
It's very annoying and even kind of dangerous that I have to keep messing with it while I drive. Thanks for your time.
Sent from my HTC Desire 626s using Tapatalk
Click to expand...
Click to collapse
It is very annoying and no I really haven't found a solution. I now only use headphones when I'm sitting still. I have found that some cords seem not to be effected by this problem but I'm not sure why. I have tried different brands and styles to no avail. The only thing I ever read about this was that on M8s people put rubber o- rings on their headphone jacks because it was shorting on the metal housing. Obviously not the issue here because the 626s is plastic, but perhaps worth a try? Let me know if you find a solution
I can tell you I don't have this issue. I am using some headphones that came with my LG 8 years ago lol and an aux from the dollar store. Haven't tried anything else.
I have some trouble with my headphone/aux port too, but not quite like what you all are describing. I'm also using one of the AdvancedStock images from Sandix, so I wasn't certain if that had something to do with it (although I doubted it). I have a cheap but sturdy aux cable in my car that connects to my phone (this cable worked flawlessly with my last phone). When I plug it in, the phone recognizes a cable is plugged in, displays the right icon in the notification bar on the top and the sound works properly (going to the car) for a few seconds. During this time I hear some clicks passed through from the phone. After a few seconds the clicks stop and the phone changes back to as if no cable is plugged in (no icon, sound goes out phone speakers). I then have to unplug the cable and re-plug it back in to repeat the process. Finally after 2-4 tries it sticks and the aux cable stays working. At no point is the connection touchy; in that if I move the phone, shake the cable, whatever, the connection stays the same. I recently learned if I plug the cable in slowly, the phone things I have a headset with a microphone plugged in (this is not that kind of cable; it does not have the third microphone connection). It still does the clicks thing, but when it stops, the aux connection is still working fine, every time. I have not tried it with a normal set of headphones/earbuds yet or an actual earbud-with-mic set.
Noticed with case seems to not do it as much. With mine I have to twist cable to get it to work. There seems to be certain spots that it stays playing but sometimes finicky