Related
In need to know the voltage across the diamond standard battery (900mAh) when the battery is fully charged and when the battery is fully discharged (the phone automatically switched off)
Could someone give me this information?
When my battery is low I read 3.2V
When my battery i high I read 4.1V
Is this correct?
That's about right, +-.1
Thanks, I've a lot of problems with the charging and discharging cicles, this information could help me to understand
While which is the charge current when the battery is fully discharged?
For my Diamond it can be very high, up to 800mA (I know it from BatteryStatus), it is a normal value?
wasm said:
While which is the charge current when the battery is fully discharged?
For my Diamond it can be very high, up to 800mA (I know it from BatteryStatus), it is a normal value?
Click to expand...
Click to collapse
Try a program, "PowerGuard", it's a very nice (and free) program developed by Muyz that will give you current and temp info, including graphs with a lot of flexibility in settings. You can get a good feel of where the current draws are. I think charge current is in the area of 700-800mA on initial charge.
Or another called Battlog. It,s better because it logs the measurements - on Powerguard it's difficult to see the actual (current, not in electrical, but in time sense ) measurement.
Thanks I'm going to try them
For now I'm testing Batlog...
This evening I'm going to make a full charging log, so I could post it tomorrow
Could you do the same? This could give me the possibility to compare them
I'm experimenting some problems with the charging circuit
mjaxa said:
Or another called Battlog. It,s better because it logs the measurements - on Powerguard it's difficult to see the actual (current, not in electrical, but in time sense ) measurement.
Click to expand...
Click to collapse
I agree with mjaxa, since your post I've found and installed Battlog. Works great on my Diamond. Very robust program and easy to read the log file or import into excel for analysis.
I have no idea why I didn't find this software when searching for a good battery monitor for my Diamond except I must have not used "log" in my searchs.
Thanx mjaxa.......
JRMX said:
Works great on my Diamond. Very robust program and easy to read the log file or import into excel for analysis.
Thanx mjaxa.......
Click to expand...
Click to collapse
I should, of course, also thank Palladium TD now that I've found the source for this fine program.
I'll also add that while the data logging is very good, I found that some of the functions do not work on my Diamond (US ROM 1.93). I know it's a beta program or maybe I just haven't figured it out yet. Using 0.2.3.130 beta I have noted:
No response on the help and other icon on the left side, battery temp read is off by a factor of 10 (noted on the Battlog thread) and cum use (mAh) does not display.
I'll post the comments on the correct thread.
In the following I reported the log of my battery charging cycle in txt and graphic format
If you can post comments or other logs, I'll appreciate
P.s. another bug in Battlog (I'think) is related to the sampling interval, as you can note observing the X axis on my plots: it is not constant in time
No one want help me with a charge/discharge log?
With the holidays I haven't had too much time to work with battlog and the phone use is not typical. I did run about 16 hrs of data and it does give some insight.
Charging overnight looked normal with current draw cycles at 2hr intervals for mail checks.
I was going to upload the excel file, but the format isn't permitted. The txt file is too large. I'll mess with it some more, but I didn't see anything that was unlike your data. 800ma on initial charges, -200ma on using various applications and phone calls, as much as -800ma on internet use and -9 to -20ma on locked standby. I did not see what I'm looking for which is an unexplainable deep discharge, overnight or during the day, I'll keep monitoring.
Hi guys, from a couple of weeks now I have a problem with the battery life on my Mi 9t Pro, it's just not like it was before, I'm guessing because of the MIUI 12, or maybe the Android version.I have the phone like almost a year, and today for example, from a full charge from 100 to 55% I have like 2 hours of SOT.I saw on forums that other users have the same problem, does anyone now how to fix this? Tried with battery saver, MIUI Optimization off, Vault app off, etc. Thanks in advance
Vladt93 said:
Hi guys, from a couple of weeks now I have a problem with the battery life on my Mi 9t Pro, it's just not like it was before, I'm guessing because of the MIUI 12, or maybe the Android version.I have the phone like almost a year, and today for example, from a full charge from 100 to 55% I have like 2 hours of SOT.I saw on forums that other users have the same problem, does anyone now how to fix this? Tried with battery saver, MIUI Optimization off, Vault app off, etc. Thanks in advance
Click to expand...
Click to collapse
What are the apps that consume the most ?
Vladt93 said:
Hi guys, from a couple of weeks now I have a problem with the battery life on my Mi 9t Pro, it's just not like it was before, I'm guessing because of the MIUI 12, or maybe the Android version.I have the phone like almost a year, and today for example, from a full charge from 100 to 55% I have like 2 hours of SOT.I saw on forums that other users have the same problem, does anyone now how to fix this? Tried with battery saver, MIUI Optimization off, Vault app off, etc. Thanks in advance
Click to expand...
Click to collapse
I made rollback from the latest Miui Global v12.0.3 to EU Rom 20.7.2 now works well.
Some versions have a problem with deep sleep.
Ref. https://xiaomi.eu/community/threads/20-7-16.56640/post-553875
If do you rollback, is mandatory make format data by twrp.
Hey I'm wondering if anyone is able to help me I have flashed the global ROM onto my phone but I've tried every ROM I could find but I'm having a major overheating issue with my mi 11 ultra. The battery sets usually at 42° c, my CPU sits a little of 100 degrees Fahrenheit and when not in use it will reboot due to overheating. I'm not sure if anyone would be able to help or help me diagnose the issue currently I'm thinking it is a battery issue. Any insights would be appreciated and thank you. P.s I added photos of my phone sitting idle connected to my car without the screen on.
hi, a question, after updating to Miui 14, the battery in your Xiaomi Redmi Note 10 Pro discharges very quickly (at night it is 20 to 30%).
Dulik54 said:
hi, a question, after updating to Miui 14, the battery in your Xiaomi Redmi Note 10 Pro discharges very quickly (at night it is 20 to 30%).
Click to expand...
Click to collapse
No. There is no discernible change from the previous version (EEA ROM).
On a seperate note I see that Xiaomi have now removed (hidden?) "cell standby" from battery stats to stop people, like me, moaning about it!
Dulik54 said:
hi, a question, after updating to Miui 14, the battery in your Xiaomi Redmi Note 10 Pro discharges very quickly (at night it is 20 to 30%)
Click to expand...
Click to collapse
Dulik54 said:
hi, a question, after updating to Miui 14, the battery in your Xiaomi Redmi Note 10 Pro discharges very quickly (at night it is 20 to 30%).
Click to expand...
Click to collapse
I noticed the same, before the update it discharged like 10% at night, and now it's like 20%
Try to reflash miui 14.0.2 EEA with Miflash tool and check option : clean all to be relax because your phone will be very clean and like new after that if the issue of battery drain stay you should try plan B and i think the problem will be resolved plan B is calibrat your batterie try to using your phone until it turns off completely and wait 3 hours while it is turned off after that plug in without turn it on until you see 100% icon battery in the dark page and try to give it another 3 hours after that plug out and power on your phone and use it until 15% ..and voilà your batterie is fresh and calibrate and happy
Ziritsu said:
Try to reflash miui 14.0.2 EEA with Miflash tool and check option : clean all to be relax because your phone will be very clean and like new after that if the issue of battery drain stay you should try plan B and i think the problem will be resolved plan B is calibrat your batterie try to using your phone until it turns off completely and wait 3 hours while it is turned off after that plug in without turn it on until you see 100% icon battery in the dark page and try to give it another 3 hours after that plug out and power on your phone and use it until 15% ..and voilà your batterie is fresh and calibrate and happy
Thank you, I will try it and I hope it works. If I still face any issue, I will message you. You made my day. Today, I am so happy because when I was looking for your post online on google search, I also discovered https://studyclerk.com/thesis-writing website where I found essay writers who will help me with my thesis writing assignments. Now, I don't have to worry about my homework because I can simply take help from that website.
Click to expand...
Click to collapse
Thank you, I will try it and I hope it works. If I still face any issue, I will message you.
Good evening
it's been a few days since I noticed on my redmi note 10 pro that my battery is discharging a little quickly
when i look in the battery statitic it says system android 20%
then I have screen at 9% and device in standby 6%
seems like a lot to me for android system
especially this unloading occurred all at once because I did not change anything in my abtitude
in general I hold 3 4 days and I hold 1 day a day and a half
my system is up to date i am on miui 13.0.16
and all my apps are up to date
thank you in advance mathieu89
Same issue Here, but no solution...
try factory reset or update to latest miui 14.0.2 then factory reset
Not help, i do it 2 times
mathieu89 said:
Good evening
it's been a few days since I noticed on my redmi note 10 pro that my battery is discharging a little quickly
when i look in the battery statitic it says system android 20%
then I have screen at 9% and device in standby 6%
seems like a lot to me for android system
especially this unloading occurred all at once because I did not change anything in my abtitude
in general I hold 3 4 days and I hold 1 day a day and a half
my system is up to date i am on miui 13.0.16
and all my apps are up to date
thank you in advance mathieu89
Click to expand...
Click to collapse
S-Cobar said:
Not help, i do it 2 times
Click to expand...
Click to collapse
What's about these commands?
Try and feedback
Laptapper said:
What's about these commands?
Try and feedback
Click to expand...
Click to collapse
I Know this command, i tryed moretimes, doesnt help bro, i think its a miui issue. I installed gsm monitor, its says wakelocks of: NetworkStats, accSyncLoop, telephony-radio etc ... This phone has bad optimization because xiaomi install one Software on all phones...im never buy a xiaomi again, after 1 year of use i have so many bugs ( sometimes itself restarts, bad wlan signal, 120hz drops to 60hz, bad battery for 5k mha, i can tell you a lot of more but time is important
I have exactly the same problem on both my phones, RN9Pro and RN10 Pro - both on MIUI 14 EEA.
It has occurred since a recent update - but I do not closely monitor so cannot point the finger at exactly which one.
Also, the battery usage graph shows the guilty "android system" seems to have a couple of busy periods each day (ie not a constant steady drain) one of which is in the early morning hours when the phone should be asleep (just like me!) and not busy for a couple of hours.
What the heck is it doing?
S-Cobar said:
I Know this command, i tryed moretimes, doesnt help bro, i think its a miui issue. I installed gsm monitor, its says wakelocks of: NetworkStats, accSyncLoop, telephony-radio etc ... This phone has bad optimization because xiaomi install one Software on all phones...im never buy a xiaomi again, after 1 year of use i have so many bugs ( sometimes itself restarts, bad wlan signal, 120hz drops to 60hz, bad battery for 5k mha, i can tell you a lot of more but time is important
Click to expand...
Click to collapse
HiQual said:
I have exactly the same problem on both my phones, RN9Pro and RN10 Pro - both on MIUI 14 EEA.
It has occurred since a recent update - but I do not closely monitor so cannot point the finger at exactly which one.
Also, the battery usage graph shows the guilty "android system" seems to have a couple of busy periods each day (ie not a constant steady drain) one of which is in the early morning hours when the phone should be asleep (just like me!) and not busy for a couple of hours.
What the heck is it doing?
Click to expand...
Click to collapse
I'm on cherishos with kernelsu, Agishna kernel, aghisna app and all is fine......
Laptapper said:
I'm on cherishos with kernelsu, Agishna kernel, aghisna app and all is fine......
Click to expand...
Click to collapse
Its not a solution for me, i hate custom roms. I think xiaomi must give us a fix update for it
S-Cobar said:
Its not a solution for me, i hate custom roms. I think xiaomi must give us a fix update for it
Click to expand...
Click to collapse
Then probably a long waiting time....
Good evening
thank you for your answers I have downloaded the latest update package and now the android system module has dropped to 4% use but on the other hand the update module is at 60 70% use
FWWI, I once had a similar problem on a RN8...
After a while, by running the 'top' utility in a root terminal, I found out a borked startup script was invoking a non-existent utility -- not only was this causing so much log spam it was impossible to figure anything from it, it made the systemUI consume unbelievable amounts of battery and heat up the device.
After disabling the rogue script, the problem immediately went away.
pnin said:
FWWI, I once had a similar problem on a RN8...
After a while, by running the 'top' utility in a root terminal, I found out a borked startup script was invoking a non-existent utility -- not only was this causing so much log spam it was impossible to figure anything from it, it made the systemUI consume unbelievable amounts of battery and heat up the device.
After disabling the rogue script, the problem immediately went away.
Click to expand...
Click to collapse
Can you explain explicit what you do? I want give a try for it
Hello
Laptapper: I'm on an official rom I can't do the command that you show in the picture
pnin: how did you do I am a solution taker
mathieu89 said:
Hello
Laptapper: I'm on an official rom I can't do the command that you show in the picture
pnin: how did you do I am a solution taker
Click to expand...
Click to collapse
Only if rooted
You can root temporary and try the commands, then unroot and see what you get....
S-Cobar said:
Can you explain explicit what you do? I want give a try for it
Click to expand...
Click to collapse
It's simple, really.
Have a terminal running with root privileges so you can see all system processes -- either by running it elevated in the first place or by issuing 'su -';
Then (install and) run the top console utility -- as I use Termux, it's available from the main repos -- and look at the top processes by resource usage, they will be the suspects that you need to be checking to see if everything is in order with;
BTW, better have the device in landscape mode so you can easily see all columns...