LG V40 wifi lag - LG V40 Questions & Answers

Hello everyone, I just acquired this cell phone, my problem is when playing via wifi it throws me some ping ups which makes it unplayable. when I switch to using mobile data this doesn't happen.
I emphasize that I already tried this on another cell phone at the same time and it does not happen, only on my V40 and I don't understand why.
If someone had the solution I would be very grateful.
P.S. I already did the factory reset and the problem persists

I see this too.
It's an additional part of my problem I'm looking for a solution for in this thread: https://forum.xda-developers.com/lg-v40/help/lg-v40-start-to-connect-to-cell-wifi-t4160391
Hope to see an answer for us. I'm betting they're somehow connected through the system not being able to decide what service to connect to ... and maybe in that answer will be a "why" and "solutions".

Related

TYTN II WiFI would not activate

Friends,
I've been proud of my TYTN II for the last thre months that I've owned it... until recently though.
Last week, my WiFi connection stopped getting activated/swichted on. Howsoever, I may try, it would not get activated, leave alone discover the network.
I tried re-flashing it, soft-resetting, hard-resetting, I mean practically everything I could, but to no avail.
Has anyone faced this problem before, and found a solution to the same. Would appreciate if you could share the same with me. I really do not want to take it for servicing, as I fear it would take me easily a week to get it back if I take it to the Workshop.
Thanks in advance,
Atul
Let me ask a couple of questions.
Can you turn wifi on or do you get an error?
If wifi turns on does it see any access points?
have you flashed your rom on your phone?
have you tried another access point for wifi?
do you have any wifi applications installed like wififofum?
Hi Chumley,
thanks for the prompt response...
I do not get any error, not even any message hen I try to activate the WiFi. Just that the rainbow circle keeps rotating (hour-glass equivalent of indows), and then shows the WiFi is still inactive (small x near the WiFi icon).
I tried re-flashig with the latest ROM available on the HTC website, but to no avail.
Trying another access point does not help either, neither would it, I guess, since its not a problem of signal strength, as much as it seems to be of the Wireless on the Kaiser not getting activated.
No 3rd party applications installed either, after the last re-flashing, still no luck.
Anything from the above, that rings a bell?
If it does it after a flash I would think you have a defective wireless adapater. Sorry.
Guess it should not be a problem as mine is still under warranty... just abt. 3 months old. But my only worry is, as I mentioned in the original post, the time it would tk. to get it fixed by the Service Centre, or if at all it is a correctible problem... I think time to ask for a favour from a friend... a standby mobile while I await mine back
If you let it go free and it comes back, then it's yours forever.
Hello, same problem here:
two days ago my wifi connection stopped suddenly and cannot activate it from the comm manager. When I click in the WIFI Icon, rainbow circle keeps rotating and PDA perfomance goes down.
any ideas :?
Hueznar,
I've already given mine for repair at Service Centre two days back, and am still awaiting it back.
Shall let you know how it goes once I get it back
WiFi would not activate: Motherboard concked off
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Oh My God !!
iatul4u said:
My PDA motherboard conked off... and it wud take 3 weeks to get it back with a new motherboard !!
Click to expand...
Click to collapse
@ Iatul
Are you sure this is the only reason & solution, for I have an IDENTICAL matter of the problem, but I never thought something was wrong with the HardWare..., damn I love HTC
I know I saw this thread too late (and finally) but if you please could respond with any news?
thanx
I'm not sure what is wrong with my Wifi...need help
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Harkadenn said:
I don't know why...really.
The comm manager stays on good, but when I try an access point it starts with the Connecting... then after a few seconds it stops and goes Unavailable.
My router works good with my bros and sis MAC books.
So I have no idea why.
Can anyone help?
Click to expand...
Click to collapse
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
gelf said:
mmm I have had the same issue... i changed the ssid and the password of the network and havn't had the prob scince.... not really an answer to the problem but it got me going.... havn't had the problem on other networks yet either
Click to expand...
Click to collapse
ssid? is this in the router menu?
So.. I tried what you said and didn't worked.
I think it has to be something set in the edit options...
Could you help me?
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
gelf said:
yeah ssid is the id for the wireless network
i'm not sure why it worked for me... should'nt have made a difference.
have you tried different wireless channels on the router?
increase the power output?
sorry man i don't really know enough about it but happy to try.. pm me if i can answer your question i will
Click to expand...
Click to collapse
By changing it to channel 1 in my router, it kinda worked..
It says Available now. Nothing else... The connect option it still there button left.
That's my update.
just in case letting you know that I disabled all MEdia net and ISP GPRS so I won't get charged because I'm not paying for my onlince services or any mobile plan with internet.
My brother told me that all WIFI connects directly to internet and it won't matter if I don't have a plan for mobile.
Correct me here, if im wrong.
Thanks.
gelf said:
looks like this guy had a similar problem... have you tried what he did?
scowltura
Junior Member
Wifi access point problem
I had a problem where suddenly after months of use with my home wifi router, it suddenly would not connect with the router anymore. Would show that it was trying to connect, and then would suddenly not connect and try another router on the list.
I tried reseting and everything. Tried re-entering the password for my router as I thought that was the problem. finally the only fix i found to work was to actually delete the access point from the phone... then reset and then let it find it all over again from scratch. And miraculously that time it worked.
I know this is not exactly your problem, but hope it helps.
Click to expand...
Click to collapse
Thank you... already tried that... I think my problem is different.

Installed and Uninstalled "WeFI" and now my WiFi won't auto connect.

Hello Everyone.
I'm new to the forum and this is my first post, although have been reading and applying a lot of knowledge you guys have! the forum is great!
Anyway, I have an unlocked HTC TyTN II, everything worked fine and I overall very satisfied with the device...
I made a foolish thing! I installed the "Wefi" utility and after playing with it for a little while, I didn't like the thing.. so, I decided to uninstall it.. however, now I find that my kaiser cannot longer connect automatically to my wireless networks after resume.. Now I only get the notification that it has found available wireless networks and, even though I chose not to show the message anymore, it does it every time, and when it does not, the phone doesn't connect to my WiFi.. so I need to do it manually... which is very annoying..
I already restored original registry keys under HLM\Comm\TNETW12511\Parms with no luck so far...
What can I do?... I'm still on the original WM 6.0, have not loaded any ROM changes yet..
Your help would be highly appreciated.
Thanks!
Oscar
Fix for auto connect problem after removing WeFi
My name is Galia Finkelstein and I work at the support desk at WeFi. This doesn't happen anymore on the new version that's been released so for the older version we have a version fix for the problem with the automatic connection, just run this file and you should be good to go http://wefi.com/static/RestoreZCAutoConnect.exe
If I can assist with anything else please drop me a line at [email protected].
WeFi post-uninstall problems
Hi!
I am sufferring from the same problems as "obadillo" - see above.
I downloaded and installed the latest version of WeFi, but after a couple of days of use, I found that I didn't like it, and it also took up too much of my valuable "today" screen space.
After uninstalling, I found that firstly, all my previous wi-fi settings had been lost (WEP keys for my home network, my work network etc etc), and secondly, even after re-enterring these details, my device (HTC Touch UK Version - Orange UK) - (running WM6 Pro) refused to auto-connect when I switch the WiFi on.
After reading the reply from Galia (directly above my post), I downloaded and ran the executable, but found that it made no difference.
Any ideas anyone? I did email Wefi's support email address, but as yet have received no reply.
Thanks in advance!
I have also tried this fix with no success (running WM5). I have also sent an email to wefi support. No response. I would recommend you stay away from this software.
We-Fi Latest Version
I have found a (kind of) solution! I have installed the latest version of We-Fi (downloaded from their website), and then DEselected it in my Today programs. So even though its not in use, its wifi parameters still overrule the PPCs local params. This seems to allow me to switch on and off WiFi WITHOUT using the WeFi software, and it now autoconnects, even with the several wireless networks I have stored, whenever I switch WiFi on, it may take a few seconds to connect, but it now does every time.
Not the greatest "solution", but at least the problem is partially solved.
But as the good man above says, unless you're VERY sure you want to install WeFi, do not install, because you will lose ALL preexisiting WiFi connections and settings etc..
Have a good one!
-=namwollem=-
Hello again, XDA devs!
I also had the problem and I'm struggling with Amir, some guy from the WeFi staff, to get the problem solved or at least recognized.
I left a complete description on my blog with links to people having problems. Here's the article (without links):
Before you consider installing WeFi on your Windows Mobile device, you might want to read this cautiously and save yourself some problems.
If you have not yet tried it, you're not missing much. Although promising, the app takes over your device. It controls your today screen, messes up your wi-fi parameters and some rarer stability issues were also reported.
First, the app needs .Net CF v.2.0, something that takes space and puts more useless crap on your device. Then the app doesn't just find networks and connect to them. Instead it overrides your wi-fi parameters and inserts its own code, thus the uninstallation problems. WeFi also takes a lot of your today screen's estate for basically nothing. How much screen space? Take a look.
Upon uninstalling it, many noticed their devices stopped automatically connecting to wireless networks, among other, rarer problems. The only known fix to the problem is to hard-reset your device and to stay the **** away from this app. We also saw a link to a .exe file somewhere but no one left feedback about it so we assume it's just as good as WeFi. You might also reinstall it, hide it and use it to take care of the wi-fi stuff or go in Settings>Connections>Wi-Fi everytime to select a network to connect to.
The developers were quick to comment about the problem and said they are working on it (see the first comment to this post). However their product page doesn't mention the problem yet and people still get caught. I left them feedback about *some* of the concerned device, assuming it's not all of them, hoping for a change. Feel free to do the same and put some pressure on these guys too.
You might also read one of those threads and see for yourself.
-Nico
Click to expand...
Click to collapse
Full article: http://nicbou.com/2008/07/09/do-not-install…-you-pocket-pcdo-not-install-wefi-on-you-pocket-pc/
I'm trying to get the warning to reach all the download spots, if you guys feel like helping. This is just unacceptable, let's do something about it!
Haim head of WeFi Windows Mobile development team here
Hello all,
First, let me assure you all that we are doing our best to solve any user problem as quickly as possible.
Out of the thousands of mobile users we have, there are really only a few users who complained about this problem.
We released a fix that you can find in: http://www.wefi.com/download/client/RestoreZCAutoConnect.exe
which after executing and doing soft reset should solve the problem.
As our support team explained to “primemaps” via e-mails (sent in 08/07) this fix only works if you uninstall WeFi first.
What you are all describing is that ZeroConfig stopped auto connecting.
By avoiding the manipulation of ZeroConfig default timeouts in our next version (which should be released in about 2 weeks from now), this should not happen anymore.
If this does not help you or you have encountered any other problem – please send me an email to [email protected] and I promise a fast response,
it would help if you mentioned your WeFi version, Device model and ActiveSync version.
I hope you would all choose to install our next version and enjoy the many benefits it can bring you.
Haim
Can't work with it and can't work without it
With my HTC TyTN II I had similar problems as others have described, or maybe even worse: I could no longer work to any wireless networks. It would disconnect in less than one second every time.
I did a hard reset and that didn't work!
I also tried the "fix" the WeFi representative suggested but that didn't help at all either.
What finally helped me was Namwollem's solution: Install WeFi again and removed it from the Today screen (but kept it installed).
I can't help wonder if WeFi changes something in the ROM since a hard reset didn't even fix it.
One of these days I will have to install the ROM all over and see if it makes a difference, but I wish I could avoid that!
I hope others won't be stupid like me and install this #$%[email protected]#&$ software!
Nothing helps for my Diamond to restore Wifi signal
I have Htc diamond with newest Rom downloaded from htc.com.
My problem is that since i installed aplication WEFI(older version) and uninstalled it, i cannot see ANY available wifi networks.. I tried alot of things. I tried soft reset, hard reset, i installed WEFI (newest version) , in moments wifi works and shows available networks and i can connect, but after it doesnt work again.. I would say it shows networks only ocasionally(even if im always surrounded by at least 10 hotspots). I installed newest Rom again, i installed old official ROM, i always put mamximum performance instead of battery, and still i have no results/cannot see ANY available networks). I have a feeling like i really have a hardware problem with wifi now..But again i think whatever it is its caused by this aplication WEFI. Does anylone have any ideas? i saw some Rafael radio ROM , maybe i can try to install that?
Thanks
AArrrggghh!
This god-awful program rears its ugly head again! I have solved the problem totally now by getting a new handset!! Now I have my Touch HD (Blackstone), one thing I WILL NOT do is install this garbage!! A quick search thru the forums here will reveal a small and very useful program which will with one click switch-on WiFi (and auto connect to the signal it finds if stored in your preferred networks) and with another click will switch WiFi off! Its called AKWifiToggle, and while no where near as fancy as WeFi, IT WORKS and DOESN'T MUCK UP YOUR PHONE!!!

Phone cutting off after call or internet usage

I have a tilt and recently it started just shutting down when I had been on a call for about 4 minutes or when I was looking around on the internet for about 4 minutes. This was a std. tilt not flashed with HTC home installed. I hard reset it and hoped that would fix the problem, but it never did. So finally I decded to flash the ROM and see if that may make it better. alas it did not. I have tried everything I know, but everytime I get online or on the phone it just shuts off. Then it takes a few times before it will ever come back on normally. Does anyone know what is going on or what I can try to fix the problem. It seems as though my data is limited and cuts off after a certain point. I would really appreciate anyones help
Anyone have anything? It also cuts off whenever I connect to Facebook app. It tells me to check my internet conection
non of my wm phones ever had that issue
read up on it on google once it's it's an operator end hardware thing
not much you can do if the hardware they use don't support it
I was having the same issue with my tilt
I was having the exact same issue.
Check my thread :
http://forum.xda-developers.com/showthread.php?t=534732
I just solve the problem replacing the battery.
I got one of this
http://www.smavtronics.com/1600mah-li-ion-replacement-battery-fits-at-and-t-8925-tilt-series.html
and it has been working like a champ.

[Q] Milestone X720 problem with network.

I've purchased a Milestone X720 for my wife, but I found the internal WiFi to work erratically at best.
It seems like it has no problem connecting to Google.com webpage (also it can sync mails and contacts), but when trying to access any other webpages (bbc.co.uk, espn.com, etc.) using the browser, it's always timing out. I know it's not a problem with my WiFi / internal network / router /internet connection, because I can navigate just fine using my HTC Desire or home laptops.
It worked for a while yesterday afternoon, then this morning wasn't able to connect to any website.
The wifi connection is using DHCP, and it shows a correct internal IP address and an excellent signal level. I don't think there's much more things I can tweak in the phone configuration, or isn't there?
Maybe it is a defective phone? Did someone experienced something like this? Should I return it and exchange it for a new one?
I'd appreciate any help.
Alex.
Actually, I've been having problems with my wifi. My wifi will stop working on any webpage at seemingly random intervals (I used to think it was when it went into sleep, but it happens when it's not in sleep now also). Eventually after restarting wifi so many times it'll glitch up and I have to restart the phone.
Providing your phone's stock (as in you haven't rooted it or the like) I'd recommend going to your carrier about the problem.
EDIT: I just checked through the posts on this board and some guy was having another problem with his wifi (different from both of ours though), he suggested getting WifiPowerSavingOff off the market, I'll try it and tell you if it fixes my problem. The only problem is it requires root access, I don't even know if it will fix your problem so you're better off sending the phone back (especially since rooting voids your warrenty). One other thing you could try is just a factory reset, it sounds like a software problem so that might work wonders, you might have to reactivate your phone afterwards though.
Well, thank you for your response.
WiFi was working OK when I came back from work, but is not working now.
The phone is unbranded unlocked, so I'll probably have to talk to the seller.
I tried to see if there was an update from Motorola, but every time I go to the System Updates it says that it is unable to connect to the server, so there's probably no available update for this phone yet.
lovecraft said:
Well, thank you for your response.
WiFi was working OK when I came back from work, but is not working now.
The phone is unbranded unlocked, so I'll probably have to talk to the seller.
I tried to see if there was an update from Motorola, but every time I go to the System Updates it says that it is unable to connect to the server, so there's probably no available update for this phone yet.
Click to expand...
Click to collapse
If it's unlocked OTA updates (updating through the settings) are probably disabled, because installing OTA updates will make you lose root (I'm assuming your phone also is rooted if it was unlocked by the seller). do you know what baseband your using right now? Also, have you installed rom manager or anything that can make nandroid backups?
I might be wrong, but I don't think it's rooted, I think it's just the way it's sold, SIM free and unlocked from factory, not by the seller.
Baseband is 3GSMEPU91A_U_91.07.56I
Well if you wanna double check, just look to see if a superuser permissions app is installed (if you don't find one it's not rooted), I never knew they sold them unlocked (although I'm in the US... so I doubt they do here). All I can say is to try a factory reset then, if that doesn't work then talk to the seller. It sounds like more of a software problem since Google works.
In the end it seems there is some kind of incompatibility between the phone and my WiFi router (a Belkin G). Yesterday I managed to borrow another WiFi router (Netgear) and it works flawlessly when connected to this AP.
I will keep testing during the weekend but I'm pretty sure this was the cause.
Thanks Shiny for your help.
Hi. I picked up a milestone via Ebay two days ago and had similar wi-fi issues. After reading a number of forums I discovered that the problem lay with my router - Siemans Gigaset SE587 (Tiscali). The wireless channel or regulatory domain was set to auto channel 1. I think this confuses the phone so with the help of the router manual I disabled auto and reset it to channel 13.
Wi-fi works flawlessly now and it hasn't affected my other devices. The link below might help.

[Q] Internet connection doesn't work at times

At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
I've found that if I do not reboot my phone at least once a day I get random problems like that.
untogether said:
At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
Click to expand...
Click to collapse
I don't reboot my phone all that often. I've never seen it lose ALL data connection capability tho...
A regular power cycle doesn't hurt tho...
Can this be the issue?
I'm experiencing the same thing, but mainly when I'm connected to 3G. My phone shows it has full bars and 3G or 4G availability but I find 60% of the time my phone has little to no data going to my phone, so none of my apps or news feeds get updated or they get updated slowly. When I'm on wifi the phone works flawlessly.
I read this article,
http://pocketnow.com/windows-phone/hack-fixes-mms-on-unlocked-samsung-wp7-handsets
One of the odder quirks of Windows Phone 7 to appear since the platform's launch has been the absence of Automatic Data Configuration for users who swap SIM chips and network-hop with their unlocked handsets.
ADC should let the phone communicate with the network it's connected to in order to retrieve all the settings it needs in order to use the network's services. Samsung defended disabling ADC by saying that its phones are intended to only be used with a specific carrier
Now I know this is talking about MMS, but does anyone think it's related to 3G connectivity from a different service provider?
i am having the same problem, it started 2 days ago after i unlocked my phone, at&t gave me the unlock code, i had to enable hot spot & de brand by loading a file, i don't have problem with WiFi just 4G, it will be fixed if i re start the phone.
problem for me with wifi+3G
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
mlekas said:
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
Click to expand...
Click to collapse
I have the EXACT same issue as you state here. The problem has existed since day one with this phone. I updated through to 8107 and the issues still exist.
So now for some interesting/good news... my dad works for a large company that has direct access to AT&T Wireless Engineers, so he got in contact with an an engineer and explained this issue as both him and I experience the same issues. The engineer was able to get a hold of a Samsung Focus S and experienced the same problems for himself. He then escalated the issue directly to Samsung who in-turn escalated this to Microsoft. Apparently Microsoft claimed the issue was theirs and they are now working on an update to rectify the problem. Samsung also apparently has some updates that they were going to push but have since held off on pushing them until Microsoft has the fix for this data issue fixed.
I've been so frustrated by these issues and the lack of information regarding them that I thought you might be interested in knowing that Samsung, Microsoft, and AT&T ARE working to get the problem resolved.
Wow! This is really great news as I am having the exact same problem. I usually just on and back off Airplane mode and that fixes it, but its a real hassle. So, the word is that Samsung is, possibly, combining all the current issues like this data, the extra settings/quirky display, and the 8107/disappearing keyboard all in to one?
matt
The AT&T engineer didn't say what was going to be included in the Samsung update, just that Samsung was holding off on releasing the update until after Microsoft supplied a fix for the data issues. Hopefully Samsung's update fixes all of the Focus S quirks (data issues, delayed keyboard sounds, quirky display/auto brightness) in one shot.
Thanks for posting this, i feel better that Microsoft & Samsung are working on fixing this issue.
Any updates/news about this specific issue? I have the exact issue with my Focus S since I got my phone
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
trupajay said:
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
Click to expand...
Click to collapse
Am I mistaken...but the majority of people posting in this thread, have the problem after installing something non standard?
8107 is not released by Samsung/AT&T, so the possibility that an associated file is not included, does exist.
Was the hotspot patch and official release, or was it intended for sideload or something?
I'm just curious. I had the luxary to have my Dell Venue Pro sent to Microsoft and examined by the Test and OEM team for WP. This was several months ago. They were able to determine I had used the force update trick to update my Device. From pieces of various emails, I was able determine the update included multiple files. The multiple files consisted of Device specific instructions and additional files needed for the that operator, in addition to the Update provided by MS.
If this is the case, forcing an update into place may indeed load the update, but it might not include other needed files.
Now, I'm not an expert, a dev or anything else important. I cannot validate that what I said is true. But, i do have the benefit of having my older device looked at by MS several months ago. This does not prove 2+2=4. But it does raise enough doubt in my mind that I won't be foruce updating my devices until alot more people get a look at this methodology and perhaps come up with some answers, or at least explanations.
Does the internet connection issue appear only after the forced 8107 update?
I had been using a Chevron-unlocked Samsung Focus S on the 7720 and had experienced no issues. Just updated to 8107 following Heathcliff74's method so I hope this issue doesn't start to plague me.
Also, has anyone had success with voluptuary's wifi internet connection sharing and interop-unlock method? I am hesitant to apply that hack exactly because of worries about issues with internet...
I'm a big chicken. I am just going to wait for AT&T to release the update. I just have this funny feeling that there's a little something extra included with the at&t update. I've done plenty of customizing over the years, but just have a feeling about this. I do wish they would step on it, though.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for a camera firmware upgrade.....
armodons said:
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for to get a camera firmware upgrade.....
Click to expand...
Click to collapse
when I said extra, I meant a focus s specific file that might act as a customization or configuration file. I don't think a block file of any sort might be included. But I do know that at&t is proprietary enough to want a unique identifier of some sort. In Gen 1, at&t had special builds just for them, turning on or off features. I know the hd7 had a specific 'config' type file, as did the venue pro. Would I call these extra files? No. I would call them required files. Build 8107 was a single build for WP. Do you think that all phones with mango had the same needs, samex files, same configs? Or is it possible that a related file acted as a config or control.
I'm not smart enough to know for sure. My gut says...maybe. .
Same Problem
Any news on this? I am having the same issue on my Focus S
gravitynoise said:
Any news on this? I am having the same issue on my Focus S
Click to expand...
Click to collapse
We just need AT&T to release the update. That's all. Rumor is all comes with the Tango update.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
I hope so. Thanks for the fast response

Categories

Resources