Good Day! After an unsuccessful attempt to install the Moto X4 rom stock, Now my smartphone does not work the SIM2, only SIM1 and when I start bootloader mod show the message "Baseband <not found>. I know I screwed up using a command at the wrong time, but any command I try to run on fastboot doesn't work. It just says "sending" without finishing the procedure. Several times I execute the commands to try to repair modem1 or modem2 but only an error message appears. The same messages that appeared when I tried to return with the rom stock. can anybody help me? I also tried to install twrp, but I also can't, this device only works with lineage recovery?
wmazoni said:
Good Day! After an unsuccessful attempt to install the Moto X4 rom stock, Now my smartphone does not work the SIM2, only SIM1 and when I start bootloader mod show the message "Baseband <not found>. I know I screwed up using a command at the wrong time, but any command I try to run on fastboot doesn't work. It just says "sending" without finishing the procedure. Several times I execute the commands to try to repair modem1 or modem2 but only an error message appears. The same messages that appeared when I tried to return with the rom stock. can anybody help me? I also tried to install twrp, but I also can't, this device only works with lineage recovery?
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-payton_retail-a5ca046-190905
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: 0043770743
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: E2812B5D
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 359552086827919
(bootloader) meid:
(bootloader) date: 02-02-2018
(bootloader) sku: XT1900-6
(bootloader) carrier_sku:
(bootloader) battid: SNN5995A
(bootloader) battery-voltage: 4347
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:9/PPW29.69-
(bootloader) ro.build.fingerprint[1]: 40-4/4ca2a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.421.17.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g8668f45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Sep 5 02:21:39 CDT 2019
(bootloader) git:abl: MBM-3.0-payton_retail-a5ca046-190905
(bootloader) git:xbl: MBM-3.0-payton_retail-d45d20b-190905
(bootloader) git:pmic: MBM-3.0-payton_retail-d45d20b-190905
(bootloader) git:rpm: MBM-3.0-payton_retail-b0c6622-190905
(bootloader) git:tz: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:hyp: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:devcfg: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:cmnlib: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:cmnlib64: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:keymaster: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:prov: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:storsec: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 6
all: listed above
Finished. Total time: 0.092s
Hi!!This is the message after you type the command
wmazoni said:
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-payton_retail-a5ca046-190905
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: 0043770743
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: E2812B5D
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 359552086827919
(bootloader) meid:
(bootloader) date: 02-02-2018
(bootloader) sku: XT1900-6
(bootloader) carrier_sku:
(bootloader) battid: SNN5995A
(bootloader) battery-voltage: 4347
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:9/PPW29.69-
(bootloader) ro.build.fingerprint[1]: 40-4/4ca2a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.421.17.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g8668f45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Sep 5 02:21:39 CDT 2019
(bootloader) git:abl: MBM-3.0-payton_retail-a5ca046-190905
(bootloader) git:xbl: MBM-3.0-payton_retail-d45d20b-190905
(bootloader) git:pmic: MBM-3.0-payton_retail-d45d20b-190905
(bootloader) git:rpm: MBM-3.0-payton_retail-b0c6622-190905
(bootloader) git:tz: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:hyp: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:devcfg: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:cmnlib: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:cmnlib64: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:keymaster: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:prov: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) git:storsec: MBM-3.0-payton_retail-e7821e0-190905
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 6
all: listed above
Finished. Total time: 0.092s
Hi!!This is the message after you type the command
Click to expand...
Click to collapse
You are using this firmware?
https://mirrors.lolinet.com/firmware/moto/payton/official/RETBR/
XT1900-6_PAYTON_RETBR_9.0_PPWS29.69-26-6_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I am using Lineage OS 17.1. I can t install stock rom on my device. Do you think its work if i try install this firmware?
Enviado de meu Moto X4 usando o Tapatalk
wmazoni said:
I am using Lineage OS 17.1. I can t install stock rom on my device. Do you think its work if i try install this firmware?
Enviado de meu Moto X4 usando o Tapatalk
Click to expand...
Click to collapse
Try just theses from stock version you were using.
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Sent from my jerry_cheets using XDA Labs
sd_shadow said:
Try just theses from stock version you were using.
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Sent from my jerry_cheets using XDA Labs
Click to expand...
Click to collapse
In the first command I already get an error message:
https://www.dropbox.com/s/om4mz3us0ers85q/Anotação 2020-09-08 191819.jpg?dl=0
wmazoni said:
Try just theses from stock version you were using.
In the first command I already get an error message:
https://www.dropbox.com/s/om4mz3us0ers85q/Anotação 2020-09-08 191819.jpg?dl=0
Click to expand...
Click to collapse
You may need to change active slot.
Flash
Then change back
Try this to see if slot changes.
Code:
fastboot getvar current-slot
fastboot set_active other
fastboot getvar current-slot
Sent from my ocean using XDA Labs
sd_shadow said:
You may need to change active slot.
Flash
Then change back
Try this to see if slot changes.
Code:
fastboot getvar current-slot
fastboot set_active other
fastboot getvar current-slot
Sent from my ocean using XDA Labs
Click to expand...
Click to collapse
The command show active b see the command below pls:
https://www.dropbox.com/s/kebh9oot54o8jqj/Anotação 2020-09-08 224144.jpg?dl=0
wmazoni said:
The command show active b see the command below pls:
https://www.dropbox.com/s/kebh9oot54o8jqj/Anotação 2020-09-08 224144.jpg?dl=0
Click to expand...
Click to collapse
Try changing it to slot a using these commands
https://forum.xda-developers.com/showpost.php?p=71987324&postcount=8
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
Try changing it to slot a using these commands
https://forum.xda-developers.com/showpost.php?p=71987324&postcount=8
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Hi. Now I got to change slot to a.
https://www.dropbox.com/s/2kxb77p5g2...13749.jpg?dl=0
However, I still find an error when I type the following commands, the command does not end:
https://www.dropbox.com/s/e00igqsicq...14453.jpg?dl=0
@sd_shadow, I am running LOS 18.1, without major issue, but my cell signal isn't fantastic. Could just be the chips in the phone, I don't know. I was thinking of flashing the modem from the latest RETUS firmware using your directions from #6. But 1) I think I started off with the stock ROM from a few months earlier and 2) I'd like to not totally screw up my LOS installation. Of course, I can try a backup, but I've never really gotten one restored successfully. Is trying to do this likely to break things?
JimDandy68 said:
@sd_shadow, I am running LOS 18.1, without major issue, but my cell signal isn't fantastic. Could just be the chips in the phone, I don't know. I was thinking of flashing the modem from the latest RETUS firmware using your directions from #6. But 1) I think I started off with the stock ROM from a few months earlier and 2) I'd like to not totally screw up my LOS installation. Of course, I can try a backup, but I've never really gotten one restored successfully. Is trying to do this likely to break things?
Click to expand...
Click to collapse
Just flashing the radio is pretty safe.
sd_shadow said:
Just flashing the radio is pretty safe.
Click to expand...
Click to collapse
Thanks. I suppose I can also reflash from the earlier stock if the most recent causes problems. I'll also be sure to check my slots. Do you flash to both slots or only one?
Related
Dear Members,
My friend Have Moto X4 (Out of Warranty) this phone popup always says "Close App". So he cannot use the phone.
We tried to repair the phone 2-3 shops. No one able to solve the issue.
I am new to Android, So I thought to watch some youtube videos and downgrade the OS.
So I tried to reduce the Android version to "PAYTON_RETAIL_9.0_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".
My bad, I watched only some Youtube videos (munchy) and started the procedure from that video.
After those steps My phone Locked. I tried to get help from him but he says the following.
"your bootloader is locked ..nothing i can do to help". sorry.
I have product vairiant : payton XT1900-2 64GB P4.
Power ok, then "oem_locked".
I am using Windows 10.
Some more information
--------
C:\adb>fastboot devices
ZY224GVR4R fastboot
--------
Fastboot recognize the device. adb not working. I have the Unlock Code from Motorola. But I cannot use it.
C:\adb>fastboot oem unlock WDEJJDCG2WPXNSWBGRT7
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
OKAY [ 0.012s]
finished. total time: 0.013s
mobile network not detected.
Tried with Wi-fi, the device search progress bar keeps on running. Didn't find the Hotspots/Wifi Router. There is no next button to proceed.
please advise me the next step. Thanks for the reply and your help.
I have the logs while the first attempt fails and erase everything.
Please help to use the phone. Thanks
patrickjjs said:
Dear Members,
My friend Have Moto X4 (Out of Warranty) this phone popup always says "Close App". So he cannot use the phone.
We tried to repair the phone 2-3 shops. No one able to solve the issue.
I am new to Android, So I thought to watch some youtube videos and downgrade the OS.
So I tried to reduce the Android version to "PAYTON_RETAIL_9.0_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip".
My bad, I watched only some Youtube videos (munchy) and started the procedure from that video.
After those steps My phone Locked. I tried to get help from him but he says the following.
"your bootloader is locked ..nothing i can do to help". sorry.
I have product vairiant : payton XT1900-2 64GB P4.
Power ok, then "oem_locked".
I am using Windows 10.
Some more information
--------
C:\adb>fastboot devices
ZY224GVR4R fastboot
--------
Fastboot recognize the device. adb not working. I have the Unlock Code from Motorola. But I cannot use it.
C:\adb>fastboot oem unlock WDEJJDCG2WPXNSWBGRT7
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
OKAY [ 0.012s]
finished. total time: 0.013s
mobile network not detected.
Tried with Wi-fi, the device search progress bar keeps on running. Didn't find the Hotspots/Wifi Router. There is no next button to proceed.
please advise me the next step. Thanks for the reply and your help.
I have the logs while the first attempt fails and erase everything.
Please help to use the phone. Thanks
Click to expand...
Click to collapse
Run
Code:
fastboot getvar all
Please post it here, and remove IMEI line
Sent from my Moto E (4) using Tapatalk
Thanks Shadow
sd_shadow said:
Run
Code:
fastboot getvar all
Please post it here, and remove IMEI line
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
C:\adb>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-payton_retail-0e6e7ce-190409
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: APAC
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (0)
(bootloader) serialno: ZY224GVR4R
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: A1A80AC4
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: ---------------
(bootloader) meid:
(bootloader) date: 12-16-2017
(bootloader) sku: XT1900-2
(bootloader) carrier_sku:
(bootloader) battid: SNN5995A
(bootloader) battery-voltage: 4270
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:9/PPW29.69-
(bootloader) ro.build.fingerprint[1]: 40-4/4ca2a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.421.17.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g8668f45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Sep 5 02:21:39 CDT 2019
(bootloader) git:abl: MBM-3.0-payton_retail-0e6e7ce-190409
(bootloader) git:xbl: MBM-3.0-payton_retail-6b0c3d7-190409
(bootloader) gitmic: MBM-3.0-payton_retail-6b0c3d7-190409
(bootloader) git:rpm: MBM-3.0-payton_retail-b0c6622-190409
(bootloader) git:tz: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:hyp: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:devcfg: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:cmnlib: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:cmnlib64: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:keymaster: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) gitrov: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:storsec: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: retin
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.176s
C:\adb>
patrickjjs said:
C:\adb>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-payton_retail-0e6e7ce-190409
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: APAC
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (0)
(bootloader) serialno: ZY224GVR4R
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: A1A80AC4
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: ---------------
(bootloader) meid:
(bootloader) date: 12-16-2017
(bootloader) sku: XT1900-2
(bootloader) carrier_sku:
(bootloader) battid: SNN5995A
(bootloader) battery-voltage: 4270
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:9/PPW29.69-
(bootloader) ro.build.fingerprint[1]: 40-4/4ca2a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.421.17.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g8668f45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Sep 5 02:21:39 CDT 2019
(bootloader) git:abl: MBM-3.0-payton_retail-0e6e7ce-190409
(bootloader) git:xbl: MBM-3.0-payton_retail-6b0c3d7-190409
(bootloader) gitmic: MBM-3.0-payton_retail-6b0c3d7-190409
(bootloader) git:rpm: MBM-3.0-payton_retail-b0c6622-190409
(bootloader) git:tz: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:hyp: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:devcfg: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:cmnlib: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:cmnlib64: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:keymaster: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) gitrov: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) git:storsec: MBM-3.0-payton_retail-4adda86-dirty-190409
(bootloader) frp-state: protected (144)
(bootloader) ro.carrier: retin
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.176s
C:\adb>
Click to expand...
Click to collapse
You cannot unlocked the bootloader unless
Oem unlock is allowed in dev options
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Help through remote screen
sd_shadow said:
You cannot unlocked the bootloader unless
Oem unlock is allowed in dev options
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Hi Shadow, Can you help through Team viewer or Anydesk, if possible.
Thanks
Process device information screen
patrickjjs said:
Hi Shadow, Can you help through Team viewer or Anydesk, if possible.
Thanks
Click to expand...
Click to collapse
Hi Shadow,
It pops up "Process device information screen " for more than 10 mins. It never returned anything.
Progress bar going on and going on.....
Tested with two times with Admin mode.
Any ideas.
Thanks
hello, could you solve your problem, for my adb if it works, that's why it returns the serial number in the command window, I think you are only trying to flash the wrong firmware, since it is not necessary to have the bootloader unlocked to flash via adb, you have to download a firmware xt1900-2 retail, regards
Solved?
patrickjjs said:
Hi Shadow,
It pops up "Process device information screen " for more than 10 mins. It never returned anything.
Progress bar going on and going on.....
Tested with two times with Admin mode.
Any ideas.
Thanks
Click to expand...
Click to collapse
Did you ever got it working? i'm probably on the same Scenario, tried a lot of stuff, but no sucess.
Hey everyone!
So after having some problems with my phone i decided to flash the android 9 stock firmware on my XT1925-5 which worked wonderful, except the sim card wasn't detected anymore... Then i thought maybe flashing revengeOS on it would fix the problem, but well, it didnt . Does anyone here know a fix for this?
The stock firmware i flashed: The one from motostockrom and then the one for the 1925-5 and then the android 9 one.
The RevengeOS ROM i use: The latest for ali
Edit: i suspect it has something to do with an error i made in manually flashing the stock firmware
Simcard not detect
Hello, I have this Moto g6 XT1925-5.
I would install RevenngeOS, but the Simcard not detect (both slots)
I have also tried to install back to stock, Lineage 16, Lineage 17.1 GSI - all the same. What can I do to fix this issue?
Can anyone help with a solution?
Other User has the same isue.
Many thanks
Sorry for this "survival english" ))
PlsHelpXDA said:
Hello, I have this Moto g6 XT1925-5.
I would install RevenngeOS, but the Simcard not detect (both slots)
I have also tried to install back to stock, Lineage 16, Lineage 17.1 GSI - all the same. What can I do to fix this issue?
Can anyone help with a solution?
Other User has the same isue.
Many thanks
Sorry for this "survival english" ))
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my payton_sprout using XDA Labs
Hello thank you for your anserwer.
Today I try install RenegenOS Agein and org Stockrom Android 9, them issue.
output
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ali_retail-e4c1135-190316
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) serialno: ZY322QCVBW
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: C7D2F5B500000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351865091956194
(bootloader) meid:
(bootloader) date: 05-07-2018
(bootloader) sku: XT1925-5
(bootloader) carrier_sku: XT1925-5
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Sep 21 16:41:41 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/ali_dteu_n/ali_n:9/PPS29.
(bootloader) ro.build.fingerprint[1]: 55-37/58b35:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.40.ali_dteu.dt
(bootloader) ro.build.version.full[1]: eu.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-g3e480e1-042
(bootloader) kernel.version[1]: 12-g667231b ([email protected]) (gcc v
(bootloader) kernel.version[2]: ersion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Sat Mar 16 16:22:49 CD
(bootloader) kernel.version[4]: T 2019
(bootloader) sbl1.git: MBM-2.1-ali_retail-0d2031d-190316
(bootloader) rpm.git: MBM-2.1-ali_retail-576a4d4-190316
(bootloader) tz.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) devcfg.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) keymaster.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) cmnlib.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) cmnlib64.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) prov.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) aboot.git: MBM-2.1-ali_retail-e4c1135-190316
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.013s
When I try to install stockrom, I get a error by flashfile.bat from stockrom (Android 9)
motostockrom.com/motorola-moto-g6-xt1925-5
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Thank you!
PlsHelpXDA said:
Hello thank you for your anserwer.
Today I try install RenegenOS Agein and org Stockrom Android 9, them issue.
output
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ali_retail-e4c1135-190316
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) serialno: ZY322QCVBW
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: C7D2F5B500000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351865091956194
(bootloader) meid:
(bootloader) date: 05-07-2018
(bootloader) sku: XT1925-5
(bootloader) carrier_sku: XT1925-5
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Sep 21 16:41:41 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/ali_dteu_n/ali_n:9/PPS29.
(bootloader) ro.build.fingerprint[1]: 55-37/58b35:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.40.ali_dteu.dt
(bootloader) ro.build.version.full[1]: eu.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-g3e480e1-042
(bootloader) kernel.version[1]: 12-g667231b ([email protected]) (gcc v
(bootloader) kernel.version[2]: ersion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Sat Mar 16 16:22:49 CD
(bootloader) kernel.version[4]: T 2019
(bootloader) sbl1.git: MBM-2.1-ali_retail-0d2031d-190316
(bootloader) rpm.git: MBM-2.1-ali_retail-576a4d4-190316
(bootloader) tz.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) devcfg.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) keymaster.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) cmnlib.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) cmnlib64.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) prov.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) aboot.git: MBM-2.1-ali_retail-e4c1135-190316
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.013s
When I try to install stockrom, I get a error by flashfile.bat from stockrom (Android 9)
motostockrom.com/motorola-moto-g6-xt1925-5
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Thank you!
Click to expand...
Click to collapse
You shouldn't use a flashfile.bat created by someone else unless it's created by Root junkie's xml converter.
Looks like this is the firmware you need
https://mirrors.lolinet.com/firmware/moto/ali/official/RETEU/
XT1925-5_ALI_RETEU_9.0_PPSS29.55-37-7-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
You could try Lmsa flash rescue but it may not recognize your device in it's current condition.
RSD lite is the next best if you have a Windows 7 pc not 10.
Next option is fastboot.exe
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my payton_sprout using XDA Labs
Hello and thank you for your answer.
I've installed the correct stock rom and suddenly the sim/sd-card work fine.
But I used the latest rom i found:
mirrors.lolinet.com/firmware/moto/ali/official/RETEU/
XT1925-5_ALI_RETEU_9.0_PPSS29.55-37-7-10_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
I installed this with flashfile.bat, without any issues. Now every problem is solve and RenvengeOS works fine too.
Thank you very much.
Wishing you all the best!
PlsHelpXDA said:
Hello thank you for your anserwer.
Today I try install RenegenOS Agein and org Stockrom Android 9, them issue.
output
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ali_retail-e4c1135-190316
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) serialno: ZY322QCVBW
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: C7D2F5B500000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351865091956194
(bootloader) meid:
(bootloader) date: 05-07-2018
(bootloader) sku: XT1925-5
(bootloader) carrier_sku: XT1925-5
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Sep 21 16:41:41 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/ali_dteu_n/ali_n:9/PPS29.
(bootloader) ro.build.fingerprint[1]: 55-37/58b35:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.11.40.ali_dteu.dt
(bootloader) ro.build.version.full[1]: eu.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.6.r1-03700-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.120-perf-g3e480e1-042
(bootloader) kernel.version[1]: 12-g667231b ([email protected]) (gcc v
(bootloader) kernel.version[2]: ersion 4.9.x 20150123 (prerelease) (GCC)
(bootloader) kernel.version[3]: ) #1 SMP PREEMPT Sat Mar 16 16:22:49 CD
(bootloader) kernel.version[4]: T 2019
(bootloader) sbl1.git: MBM-2.1-ali_retail-0d2031d-190316
(bootloader) rpm.git: MBM-2.1-ali_retail-576a4d4-190316
(bootloader) tz.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) devcfg.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) keymaster.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) cmnlib.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) cmnlib64.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) prov.git: MBM-2.1-ali_retail-4636043-190316
(bootloader) aboot.git: MBM-2.1-ali_retail-e4c1135-190316
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.013s
When I try to install stockrom, I get a error by flashfile.bat from stockrom (Android 9)
motostockrom.com/motorola-moto-g6-xt1925-5
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Thank you!
Click to expand...
Click to collapse
me too
I have tried 5 different firmware image downloads to get the stock rom fixed on a soft-bricked XT1900-1, but ALWAYS get:
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
Which firmware do I need? Bootloader screen says:
Product/Variant: payton XT1900-1 64GB P4
and I already tried the firmware provided by thread:
https://forum.xda-developers.com/showthread.php?t=3918675
Cheers.
Der_CraftMeister said:
I have tried 5 different firmware image downloads to get the stock rom fixed on a soft-bricked XT1900-1, but ALWAYS get:
writing 'boot_a'...
(bootloader) Preflash validation failed
FAILED (remote failure)
Which firmware do I need? Bootloader screen says:
Product/Variant: payton XT1900-1 64GB P4
and I already tried the firmware provided by thread:
https://forum.xda-developers.com/showthread.php?t=3918675
Cheers.
Click to expand...
Click to collapse
To find correct firmware check getvar all
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Or LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
https://www.motorola.com/us/rescue-and-smart-assistant/p
sd_shadow said:
To find correct firmware check getvar all
Code:
fastboot getvar all
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Or LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
Thanks, I got the info from "getvar":
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-payton_fi-0e6e7ce-181231
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: NA
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SKHYNIX HCG8a4 RV=08 PV=A2 FV=00000000000000A2
(bootloader) ufs: N/A
(bootloader) ram: 4GB SKHYNIX LP4x DIE=16Gb M5=06 M6=04 M7=00 M8=11
(bootloader) cpu: SDM630 1.0 (2)
(bootloader) serialno: <<ELIDED>>
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) uid: 9C3D2B91
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: <<ELIDED>>
(bootloader) meid:
(bootloader) date: 08-28-2018
(bootloader) sku: XT1900-1
(bootloader) carrier_sku: XT1900-1
(bootloader) battid: SNN5994A
(bootloader) battery-voltage: 4083
(bootloader) iccid: <<ELIDED>>
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton_fi/payton_sprout:9
(bootloader) ro.build.fingerprint[1]: /PPWS29.69-39-6-9/b16e4a:user/rele
(bootloader) ro.build.fingerprint[2]: ase-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.491.46.payton_fi.
(bootloader) ro.build.version.full[1]: google_fi.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g946d6d55f443
(bootloader) kernel.version[1]: -02533-g44f8cfac145a ([email protected]
(bootloader) kernel.version[2]: ) (gcc version 4.9.x 20150123 (prereleas
(bootloader) kernel.version[3]: e) (GCC) ) #1 SMP PREEMPT Tue May 19 02:
(bootloader) kernel.version[4]: 41:47 CDT 2020
(bootloader) git:abl: MBM-3.0-payton_fi-0e6e7ce-181231
(bootloader) git:xbl: MBM-3.0-payton_fi-6b0c3d7-181231
(bootloader) git:pmic: MBM-3.0-payton_fi-6b0c3d7-181231
(bootloader) git:rpm: MBM-3.0-payton_fi-b0c6622-181231
(bootloader) git:tz: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:hyp: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:devcfg: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:cmnlib: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:cmnlib64: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:keymaster: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:prov: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) git:storsec: MBM-3.0-payton_fi-c593123-dirty-181231
(bootloader) frp-state: protected (409)
(bootloader) ro.carrier: retus
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.045s
...upon which I downloaded:
XT1900-1_PAYTON_FI_9.0_PPWS29.69-26-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
from the mirrors site, and still got (remote failure) upon trying to flash the boot_a partition with boot.img.
Any hints/helps?
Regards,
Chris.
Der_CraftMeister said:
To find correct firmware check getvar all
Thanks, I got the info from "getvar":
...upon which I downloaded:
XT1900-1_PAYTON_FI_9.0_PPWS29.69-26-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
from the mirrors site, and still got (remote failure) upon trying to flash the boot_a partition with boot.img.
Any hints/helps?
Regards,
Chris.
Click to expand...
Click to collapse
Bootloader is locked, manual flashing rarely works.
Use LMSA Flash Rescue or RSD Lite
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ali using XDA Labs
sd_shadow said:
Bootloader is locked, manual flashing rarely works.
Use LMSA Flash Rescue or RSD Lite
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
RSDlite can't see pie on x4.
Hello!, i have a big problem with this phone, i can only see on my pc as "Motorola ADB Interface" under "Android Device".. i have fastboot with flashing locked, i cant unlock oem... so cant install any rom, i tried with adb, rsd lite, it get message: (bootloader) flash permission denied. this is my getvar all... i tried blank flash and EDL, but nothing, please help me
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-uefi-9bb8842-180814
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY224WXFZP
(bootloader) cid: 0x0032
(bootloader) channelid: 0x28
(bootloader) uid: 73C99517
(bootloader) securestate: flashing_locked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 356486081385834
(bootloader) meid:
(bootloader) date: 03-26-2018
(bootloader) sku: XT1900-4
(bootloader) carrier_sku:
(bootloader) battid: SNN5994A
(bootloader) battery-voltage: 3228
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:8.0.0/OPWS2
(bootloader) ro.build.fingerprint[1]: 7.57-40-22/28:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.281.28.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband: M660_7036.16.01.69.01R PAYTON_LATAM_CUST
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g755d0b4 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Aug 14 12:39:24 CDT 2018
(bootloader) git:abl: MBM-3.0-uefi-9bb8842-180814
(bootloader) git:xbl: MBM-3.0-uefi-dfccc3a-180814
(bootloader) gitmic: MBM-3.0-uefi-dfccc3a-180814
(bootloader) git:rpm: MBM-3.0-uefi-245b046-180814
(bootloader) git:tz: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:hyp: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:devcfg: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:cmnlib: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:cmnlib64: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:keymaster: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) gitrov: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:storsec: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) qe: "qe 1/1"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: opencl
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
monxdio said:
Hello!, i have a big problem with this phone, i can only see on my pc as "Motorola ADB Interface" under "Android Device".. i have fastboot with flashing locked, i cant unlock oem... so cant install any rom, i tried with adb, rsd lite, it get message: (bootloader) flash permission denied. this is my getvar all... i tried blank flash and EDL, but nothing, please help me
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-uefi-9bb8842-180814
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SAMSUNG DD68MB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 3GB SAMSUNG LP4x DIE=12Gb M5=01 M6=06 M7=00 M8=0E
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY224WXFZP
(bootloader) cid: 0x0032
(bootloader) channelid: 0x28
(bootloader) uid: 73C99517
(bootloader) securestate: flashing_locked
(bootloader) verity-state: logging (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 356486081385834
(bootloader) meid:
(bootloader) date: 03-26-2018
(bootloader) sku: XT1900-4
(bootloader) carrier_sku:
(bootloader) battid: SNN5994A
(bootloader) battery-voltage: 3228
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:8.0.0/OPWS2
(bootloader) ro.build.fingerprint[1]: 7.57-40-22/28:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.281.28.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband: M660_7036.16.01.69.01R PAYTON_LATAM_CUST
(bootloader) kernel.version[0]: Linux version 4.4.78-perf-g755d0b4 (huds
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 20150
(bootloader) kernel.version[2]: 123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Tue Aug 14 12:39:24 CDT 2018
(bootloader) git:abl: MBM-3.0-uefi-9bb8842-180814
(bootloader) git:xbl: MBM-3.0-uefi-dfccc3a-180814
(bootloader) gitmic: MBM-3.0-uefi-dfccc3a-180814
(bootloader) git:rpm: MBM-3.0-uefi-245b046-180814
(bootloader) git:tz: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:hyp: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:devcfg: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:cmnlib: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:cmnlib64: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:keymaster: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) gitrov: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) git:storsec: MBM-3.0-uefi-eee7f2d-dirty-180814
(bootloader) qe: "qe 1/1"
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: opencl
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
Click to expand...
Click to collapse
Try LMSA's Flash Rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
You can't use a blankflash unless device is in EDL mode
Rsd lite doesn't work with windows 10
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Manual flashing often doesn't work with locked bootloader.
Bootloader was unlocked?
You tried unlock code again?
Sent from my Moto E (4) using Tapatalk
Bootloader Is locked, i have the code but when i enter in fastboot cmd it said i need to be in developer mode...
monxdio said:
Bootloader Is locked, i have the code but when i enter in fastboot cmd it said i need to be in developer mode...
Click to expand...
Click to collapse
Could try
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
Reboot bootloader
Then flash recommended flash commands from flashfile.xml
Sent from my Moto E (4) using Tapatalk
---------- Post added at 10:25 PM ---------- Previous post was at 10:21 PM ----------
Is this the firmware you tried?
https://mirrors.lolinet.com/firmware/moto/payton/official/OPENCL/
Sent from my Moto E (4) using Tapatalk
no, i'll try with that firmware...
http://prntscr.com/tzbsep
with your firmware
And LMSA Failed too
monxdio said:
http://prntscr.com/tzbsep
with your firmware
Click to expand...
Click to collapse
You ran?
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
Reboot bootloader
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img fastboot flash modem NON-HLOS.bin fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot bluetooth flash BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
And the rest.
Sent from my Moto E (4) using Tapatalk
i type all those command and when enter in bootloader.img said the same error with flash permission denied
Moto X4 shows your device is corrupt it cant be trusted and will not boot. pls help I tried few methods but not worked.
arunyesudas03 said:
Moto X4 shows your device is corrupt it cant be trusted and will not boot. pls help I tried few methods but not worked.
Click to expand...
Click to collapse
Try LMSA's Rescue
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
I tried rescue app first but it doesn't work.
I tried rescue app first but it doesn't work.
sd_shadow said:
Try LMSA's Rescue
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
arunyesudas03 said:
I tried rescue app first but it doesn't work.
Click to expand...
Click to collapse
What error did you get?
What does getvar all say?
Code:
fastboot getvar all
sd_shadow said:
What error did you get?
What does getvar all say?
Code:
fastboot getvar all
Click to expand...
Click to collapse
Bro can you check the 3rd image
arunyesudas03 said:
Bro can you check the 3rd image
Click to expand...
Click to collapse
No the error with LMSA
sd_shadow said:
No the error with LMSA
Click to expand...
Click to collapse
sd_shadow said:
What error did you get?
What does getvar all say?
Code:
fastboot getvar all
Click to expand...
Click to collapse
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-uefi-641a15b-180328
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: APAC
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (0)
(bootloader) serialno: ZY224FMS7V
(bootloader) cid: 0x00FF
(bootloader) channelid: 0x00
(bootloader) uid: 00000000
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 351899080443617
(bootloader) meid:
(bootloader) date: 10-17-2017
(bootloader) sku: XT1900-2
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) battery-voltage: 3775
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:9/PPW29.69-
(bootloader) ro.build.fingerprint[1]: 40-4/4ca2a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.421.17.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: M660_7045.36.01.100R PAYTON_APACDSDS_CUST
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g8668f45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Sep 5 02:21:39 CDT 2019
(bootloader) git:abl: MBM-3.0-uefi-641a15b-180328
(bootloader) git:xbl: MBM-3.0-uefi-dfccc3a-180328
(bootloader) gitmic: MBM-3.0-uefi-dfccc3a-180328
(bootloader) git:rpm: MBM-3.0-uefi-245b046-180328
(bootloader) git:tz: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:hyp: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:devcfg: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:cmnlib: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:cmnlib64: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:keymaster: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) gitrov: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:storsec: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier: retin
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.205s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
arunyesudas03 said:
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-uefi-641a15b-180328
(bootloader) product: payton
(bootloader) board: payton
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: APAC
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (0)
(bootloader) serialno: ZY224FMS7V
(bootloader) cid: 0x00FF
(bootloader) channelid: 0x00
(bootloader) uid: 00000000
(bootloader) securestate: oem_locked
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 351899080443617
(bootloader) meid:
(bootloader) date: 10-17-2017
(bootloader) sku: XT1900-2
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) battery-voltage: 3775
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/payton/payton:9/PPW29.69-
(bootloader) ro.build.fingerprint[1]: 40-4/4ca2a:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.421.17.payton.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-04900-sdm660.0
(bootloader) version-baseband: M660_7045.36.01.100R PAYTON_APACDSDS_CUST
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-g8668f45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Thu Sep 5 02:21:39 CDT 2019
(bootloader) git:abl: MBM-3.0-uefi-641a15b-180328
(bootloader) git:xbl: MBM-3.0-uefi-dfccc3a-180328
(bootloader) gitmic: MBM-3.0-uefi-dfccc3a-180328
(bootloader) git:rpm: MBM-3.0-uefi-245b046-180328
(bootloader) git:tz: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:hyp: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:devcfg: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:cmnlib: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:cmnlib64: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:keymaster: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) gitrov: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) git:storsec: MBM-3.0-uefi-eee7f2d-dirty-180328
(bootloader) qe: "qe 0/0"
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier: retin
(bootloader) current-slot: _a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 7
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.205s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
Click to expand...
Click to collapse
I believe your only option is booting into EDL Mode and using a blankflash
Is my device in EDL Mode?
How to boot into EDL Mode
You will need to find a blankflash for "payton"
https://forum.xda-developers.com/c/moto-x4.6912/
sd_shadow said:
I believe your only option is booting into EDL Mode and using a blankflash
Is my device in EDL Mode?
How to boot into EDL Mode
You will need to find a blankflash for "payton"
https://forum.xda-developers.com/c/moto-x4.6912/
Click to expand...
Click to collapse
Ok let me check
Hi
While connecting my device it detect as usb controllers as unknown usb device(device descriptor request failed).
Not detecting under port as qd loader
arunyesudas03 said:
Moto X4 shows your device is corrupt it cant be trusted and will not boot. pls help I tried few methods but not worked.
Click to expand...
Click to collapse
Managed to solve?