[TREBLE][AOSP][Q/R] riseTreble for A5 and A7 2017! - Samsung Galaxy A3, A5, A7 (2017) ROMs, Kernels, Re

[TREBLE][AOSP][Q/R] riseTreble for A5 and A7 2017! - Samsung Galaxy A3, A5, A7 (2017) ROMs, Kernels, Re

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
I am NOT responsible for bricked devices, destroyed SD cards or any
damage that may happen to your device.
Features
Vendor ported from official Galaxy Note10 Lite R release (N770FXXU7EUC6) (v2.0/v2.1) / A7 2018 Q release (A750FNXXU4CTE3) (v1.0/v1.1)
Kernel built from A720SKSU5CUJ2 (v2.0/v2.1) / A720SKSU3CSH1 (v1.0/v1.1) sources with Linux 3.18.140 (v2.0/v2.1) / 3.18.91 (v1.0, v1.1)
Ready for a lot of Android 11/10 GSIs
Its recommended to use riseKernel for Treble from here
General bugs
Selinux is, and will remain, Permissive
Spoiler: Android 10 bugs
Double tap to wake
Camera flash doesn't work in stock camera. Use Footej, Gcam, or any other camera app
AOD sometimes doesn't turn back on again after going off. (e.g. when pulling the phone out of your pocket)
Installation
Just in case, make a backup of all your partitions in case something goes wrong.
Download and install the repartition script from here if you haven't done yet.
Make sure to have the latest version of TWRP/SHRP/Orangefox installed.
Wipe /system, /vendor, /data and /cache in recovery.
Spoiler: Android 11 installation
Download any Android 11 GSI. Choose arm64 and A/B. (A only will NOT boot!)
Make sure the GSI has "vndklite", "RW" or "lite" in its name.
Make sure the downloaded GSI is a .img file. If it's a .zip or .xz file you need to extract it first.
Download riseTreble-11-v2.1-a57y17lte.zip. from the downloads section below.
Copy the GSI you chose and downloaded earlier and the riseTreble ZIP to your phone (preferably to SD card)
In recovery, go to "Install", choose "Install Image" and select the GSI you just downloaded. (This can be different depending on the recovery used)
Choose "System Image" and flash it. (Flashing GSIs can sometimes take >2mins depending on which GSI you flash.)
Flash riseTreble-11-v2.1-a57y17lte.zip.
Optionally, if not already included in the GSI, flash Opengapps AFTER the first boot. Choose arm64 and 11.0.
Spoiler: Android 10 installation
Download any Android 10 GSI. Choose arm64 and A/B. (A only will NOT boot!)
Make sure the downloaded GSI is a .img file. If it's a .zip or .xz file you need to extract it first.
Download riseTreble-v1.1-a57y17lte.zip. from the downloads section below.
Copy the GSI you chose and downloaded earlier and the riseTreble ZIP to your phone (preferably to SD card)
In recovery, go to "Install", choose "Install Image" and select the GSI you just downloaded. (This can be different depending on the recovery used)
Choose "System Image" and flash it. (Flashing GSIs can sometimes take >2mins depending on which GSI you flash.)
Flash riseTreble-v1.1-a57y17lte.zip.
Optionally, if not already included in the GSI, flash Opengapps AFTER the first boot. Choose arm64 and 10.0.
I highly recommend flashing a GSI that has Gapps already included!
Optionally, flash Magisk after first boot (You may need to remove built-in root first, check out the FAQ down below for that)
You are done!
From where can I get GSIs?
You can find a lot of GSIs on pHH's Github and on XDA.
Remember to always choose A/B and arm64. (And make sure it contains "vndklite", "RW" or "lite" if you're flashing an android 11 GSI)
Please note that most OEM GSIs (such as OxygenOS, MIUI, OneUI, ...) will NOT work since this vendor is/was made for AOSP GSIs!
Also, see a list of GSIs we have already tested in post #2.
How do I update a GSI?
If there is an update for your GSI, make sure to make a backup of /system and /vendor in case something goes wrong.
Wipe /system and install the GSI.
Flash the riseTreble zip again after updating the GSI. Otherwise you'll probably end up in a bootloop.
If you had Gapps and/or Magisk installed before, you will likely need to reflash them too.
Done.
Downloads
Spoiler: Android 11
riseTreble v2.1: Google drive | Androidfilehost | MEGA
Spoiler: Android 10
riseTreble v1.1: Google drive | Androidfilehost
navbar/gesture enabler: Google Drive | Androidfilehost
Donations
If you like my work feel free to send me a donation.
Support and FAQ
Telegram Group
FAQ (Frequently asked questions)
Changelogs
Spoiler
Spoiler: v2.1
*Updated kernel to A720SKSU5CUJ2 and merged latest changes from LineageOS
*Fixed dual SIM that accidentally broke
*Fixed NFC HCE and extended length support
*Fixed microphone not working in third-party apps
*Fixed vulkan
Spoiler: v2.0
*Updated for android 11
*Fixed various issues on dual SIM devices
*Updated kernel to latest A720SKSU5CTL2 release
*Updated kernel to Linux 3.18.140
*Enabled navigation bar/gestures by default (Can be disabled in Phh settings)
*Switched to A720S Pie bluetooth
*Enabled ZRAM with 1.5GB
*Switched to opensource NFC HAL from LineageOS
*Added libLifevibe blobs for audio enhancements
*Switched to N770F R RIL
*Included all other fixes from LineageOS, thanks to @Option58 !
Spoiler: v1.1
*Fixed some OMX issues (screen recorder, sometimes video issues)
*SIM detection on dual SIM devices with only one SIM in use should be fixed
*In-app fingerprint authentication should be fixed
Spoiler: v1.0
*Initial release
Credits
@corsicanu for his work on the A720S kernel
@Astrako for helping me getting Treble initially working on 7880
@Option58 for initially bringing android 11 to our devices
All telegram testers
PM me if I missed someone!
Me for spending my free time on this
Contributors
Simon1511
Source Code (v1.0/v1.1): https://github.com/Simon1511/android_kernel_samsung_universal7880/tree/10.0-treble
Source Code (v2.0/v2.1): https://github.com/Simon1511/android_kernel_samsung_universal7880/tree/11.0-treble
Version Information
Status: Stable
Stable Release Date: 2020-09-08
Created 2020-09-08
Last Updated 2020-09-10

List of GSIs which have been tested so far
Please note that most OEM GSIs (such as OxygenOS, MIUI, OneUI, ...) will NOT work!
Spoiler: Android 12 GSIs
Working GSIs:
PHH AOSP 12 v400.d: General bugs, can't set a lockscreen, probably more -- see post #81 by @YusufOzmen01 for more information.
Spoiler: Android 11 GSIs
Working GSIs:
PHH AOSP v310: General bugs
Bless v306: General bugs, button lights
CAOS v310: General bugs
crDroid R Mod (crDRom): General bugs
HavocOS v4.5 official: General bugs
LeOS July: General bugs
LineageOS 18.1: General bugs
LineageOS R Mod (LiR): General bugs
PixelExperience Plus v310: General bugs
Google AOSP 11: General bugs, no exfat support, button lights, ...
Pixel 11 ErfanGSI: General bugs, no exfat support, wifi dies after rebooting, ...
CorvusOS v16.6, v16.5, v15: sim card not detected, general bugs
dotOS 5.1.1: general bugs, hardware back and app list buttons dont work out of the box (Read FAQ on how to disable navigation bar to fix this issue)
NusantaraOS v2.5: general bugs, button lights don't work, hotspot can't be turned on
And many more!
Broken/Not booting GSIs:
AncientOS: Reboots on bootloader splash
CherishOS: Reboots on bootloader splash
CorvusOS v14.5, 9.0: Doesn't boot
Spoiler: Android 10 GSIs
Working/Usable GSIs:
PHH AOSP v221: General bugs
Havoc v3.7 official: General bugs (except for DT2W), Hardware button backlight, ADB/USB debugging
caos-v222-200808-arm64-bvN: General bugs
descendant-X-OFFICIAL-arm64-ab-20200615: General bugs
aosp_arm64-exp-QJR1.191112.001-6004257: General bugs, extSD card access broken, button backlight, MTP
lineage-17.1-20200808-UNOFFICIAL-treble_arm64_bvN: General bugs
DirtyUnicorns-14.0_111119-ARM64-AB: General bugs
PixelExperienceQ-28102019-ARM64-AB: General bugs
PixelExperience_ARM64AB-10.0-20200118-2138-GSI: General Bugs
AospExtended-v7.0-20191017-2132-ALPHA-treble_arm64_bvS: General bugs
EvolutionX_4.0_ARM64AB-10.0-20200112-2300-GSI: General bugs
RROS-Q-8.5.8-20200815-ARM64_AB-GSI: General bugs
bless-v221-200725-arm64-bvN: General bugs
bliss-v217-200602-arm64ab-vanilla: General bugs
MiMax3EU-AB-10-20200815-nippongsi (MIUI): General bugs, booting either takes >5 minutes or only boots on second try, ADB/USB debugging, screen brightness cant be changed, NFC, flashlight, hardware button backlight, fingerprint, setting lockscreen, hotspot, probably more
EmperorMiLavender-AB-10-20200525-ErfanGSI: Same as MiMax3EU-AB-10-20200815-nippongsi
LavenderMiHellas-AB-10-20200801-nippongsi: Same as MiMax3EU-AB-10-20200815-nippongsi
PocoF1EU-AB-10-20200813-nippongsi: Same as MiMax3EU-AB-10-20200815-nippongsi
MortalOS-AB-10-20200612-nippongsi: Same as MiMax3EU-AB-10-20200815-nippongsi
MIUI-AB-10-20200601-ErfanGSI: Same as MiMax3EU-AB-10-20200815-nippongsi(?)
BootleggersROM-Queque-5.0-arm64_ab-GSI: General bugs
ZenX-OS-v1.9-arm64-ab-vanilla: General bugs
RROS-Q-8.5.8-20200815-ARM64_AB-GSI: General bugs
Generic-AB-11-20200611-ErfanGSI.img-0323: Bootable, but has too much stuff broken to list here.
Broken/Not booting GSIs:
OxygenOS-AB-10-20190903-ErfanGSI: Bootloop
HydrogenOS-AB-10-20191102-ErfanGSI: Bootloop
POSP-AB-10-20190910-ErfanGSI: Bootloops on bootloader splash
ExtendedUI_1.0.2_ARM64AB-10.0-20200207-2204-GSI: Bootloops on bootloader splash
MIUI12_AB-20200427-ErfanGSI-tunasahinn: Bootloops on bootloader splash
OP8-AB-10-20200814-nippongsi: Bootloop
OxygenOS-AB-10-20191108-ErfanGSI: Bootloops on bootloader splash
DavinciEU-AB-10-20200814-nippongsi: Bootloops on bootloader splash
Mi8SEEU-AB-10-20200814-nippongsi: Boots, but gives a blackscreen after boot
ColorOS-AB-10-20200609-nippongsi: Bootloops on bootloader splash
MIUI-AB-10-20190828-ErfanGSI: booting either takes >5 minutes or only boots on second try, blackscreen after setup, ADB/USB debugging
Flyme-AB-10-20200808-nippongsi: Boots, but freezes in setup when trying to add a WiFi network
GinkgoMasik-AB-10-20200809-nippongsi: Bootloop
JoyUI-AB-10-20200529-ErfanGSI: Bootloop
OP5T-AB-10-20200809-nippongsi: Bootloop
violetMiNovo-AB-10-20200727-nippongsi: Boots, but gives a blackscreen after boot
RogUI-AB-10-20200804-nippongsi: Bootloops on bootloader splash
RaphaelMoD-AB-10-20200825-nippongsi with and without DFE: Bootloop
Mi10UltraCN-AB-10-20200823-nippongsi with and without DFE: Bootloops on bootloader splash
Derpfest-AB-10-20200821-nippongsi: Bootloops on bootloader splash
DU-AB-10-20200821-nippongsi: Bootloops on bootloader splash
HentaiOS-AB-10-20200822-nippongsi: Bootloops on bootloader splash
DandelionGlobal-AB-10-20200907-nippongsi: Bootloop
dipperMMX-AB-10-20200908-nippongsi: Bootloops on bootloader splash

FAQ (Frequently asked questions)
1: I can't pass SafetyNet on some GSIs!
->Go to Settings, pHH settings, Misc and tap "Securize". This will remove in-built root. To completely pass Safetynet, make sure to have MagiskHide enabled in Magisk's settings
and install the MagiskHide PropsConfig module and set the fingerprint to A5 2017 or A7 2017.
2: How do I disable the navigation bar?
->Go to Settings, pHH settings, Misc and Choose "Force navigation bar disabled" and reboot.
3: Installing Gapps in recovery gives me a "not enough space left" error!
->In recovery, go to "Wipe", "Advanced Wipe", select "System", then tap "Repair or Change File System", then tap "Resize File System" and confirm by swiping. Reboot to recovery
and install Gapps. The procedure may be different in SHRP and OrangeFox recovery.
4: Magisk shows "API error" when I check for safetynet!
->First, enable MagiskHide in Magisk's settings. Then follow the instructions in step 1.
5: Help, my phone spams "Play protect not enabled" notifications!
->First, enable MagiskHide in Magisk's settings. Then follow the instructions in step 1.
6: How do I remove built-in root?
->Go to Settings, pHH settings, Misc and tap "Securize". This will remove in-built root.
Maybe more, feel free to tell me.

So it's ready to get released now. Good job, Simon!

Nice

Glad for this news

Good to see this finally available to everyone now, good job

Nice to finally see Treble on our device. Great Work, Keep it up!

Thank You very very much for your work: D
---------- Post added at 11:26 PM ---------- Previous post was at 11:04 PM ----------
Can I install android 11 gsi?

Really nice work , i tested it on my SM-A520F with phhusson's AOSP v222, some noticed bugs:
Single sim on dual sim models like mine need force disabling second sim with persist.radio.multisim.config=none in file /vendor/build.prop to make sim recognized at all.
/data encryption can be fixed by adding encryptable=footer to mount options of /data in /vendor/etc/fstab.samsungexynos7880

Treble for A5 2017, that's some great news. Maybe we can except OneUI with Android 10 a little bit sooner.

brightness fix for MIUI gsi
https://sourceforge.net/projects/vegadatagsis/files/other-tools/
Use Generic 2

Fire58 said:
brightness fix for MIUI roms
Click to expand...
Click to collapse
It was fix??

TioLord said:
It was fix??
Click to expand...
Click to collapse
This Is the fix
https://sourceforge.net/projects/vegadatagsis/files/other-tools/
Use Generic 2

Fire58 said:
This Is the fix
https://sourceforge.net/projects/vegadatagsis/files/other-tools/
Use Generic 2
Click to expand...
Click to collapse
Allright, try it
---------- Post added at 05:04 PM ---------- Previous post was at 04:58 PM ----------
Fire58 said:
This Is the fix
https://sourceforge.net/projects/vegadatagsis/files/other-tools/
Use Generic 2
Click to expand...
Click to collapse
Why i can't download it from my device?

TioLord said:
Allright, try it
---------- Post added at 05:04 PM ---------- Previous post was at 04:58 PM ----------
Why i can't download it from my device?
Click to expand...
Click to collapse
Enable desktop mode

TioLord said:
Allright, try it
---------- Post added at 05:04 PM ---------- Previous post was at 04:58 PM ----------
Why i can't download it from my device?
Click to expand...
Click to collapse
You can press a try download anyway button if it's sourceforge, more the question is why are you using miui given that it's so buggy lol

Has anyone been able to pass safetynet? I'm stuck on the ctsProfile: false.
I tried to change the device fingerprint to a known a5y17lte fingerprint using magisk and the hide props module to no avail.
Thanks in advance!

Jmackley said:
You can press a try download anyway button if it's sourceforge, more the question is why are you using miui given that it's so buggy lol
Click to expand...
Click to collapse
MIUI Is stable
---------- Post added at 11:13 AM ---------- Previous post was at 11:09 AM ----------
I have tested MIUI12EU-AB-10-20200519-ErfanGSI and apparently it is more stable than the other gsi the bugs are the same, I found a fix for the brightness, @ Simon1511 could you add it in the working gsi list?

Fire58 said:
MIUI Is stable
---------- Post added at 11:13 AM ---------- Previous post was at 11:09 AM ----------
I have tested MIUI12EU-AB-10-20200519-ErfanGSI and apparently it is more stable than the other gsi the bugs are the same, I found a fix for the brightness, @ Simon1511 could you add it in the working gsi list?
Click to expand...
Click to collapse
Try pm to he in telegram

Related

[ABANDONED] crDroid v5.3 [Tissot][4.9][26/04/2019]

-BUGLIST-
Rom Specific Bugs:
Code:
You tell me!
Device Specific Bugs:
Code:
You tell me!
-GUIDES-
Firmware Update
If you are on Nov firmware :
1) Backup ur efs , modem , persist , boot from twrp.
2) Flash December firmware
3)Reboot to system
4) Flash January firmware.
If you are on December firmware :
1) Flash Jan firmware.
If you have already flashed Jan over November and broke your volte then :
BACKUP YOUR EFS , BOOT , MODEM AND PERSIST in TWRP.
1) Restore the Joey's efs backup from twrp and boot to system .
2) Flash Dec firmware and reboot to system.
3 Flash Jan firmware and reboot to system.
OR If you lose imei following the above method , restore your Jan backup and follow the procedure below:
1) Backup ur internal storage and data
2) Flash the twrp flashable fastboot rom zips from xda.(Stock pie jan)
Rebooting to system is important.
If you loose your imei and hadn't backed up your efs then pls don't contact me.
This method won't break your volte but if you flash Jan firmware over November firmware then volte will be broken.
Joeys' EFS Backup
NOV Firmware
DEC Firmware
JAN Firmware
Stock to Custom
1) Make sure your bootloader is unlocked.
2) Boot to fastboot mode by holding volume down & power button.
3) Connect Phone to pc and HOTBOOT the given twrp. (fastboot boot recovername.img)(NOT Cosmic Dan's)
4) While in twrp , FLASH twrp installer by cosmic dan.
5) Reboot to TWRP & you have installed permanent TWRP.
6) Now Flash any custom rom the usual way.
Hot boot TWRP
Cosmic Dan's TWRP Insatller

-CHANGELOGS-
Changelog(25/12/2108)
Initial Build
Changelog(31/12/2108)
Support for Dual LTE with december firmware.
All LTE bands include - With November Firmware.
Network issues fixed with improved network stability.
Added 4G+ Indication.
Added new volte icon.
Added ARCORE Support.
Inline with crDroid Changes.
Support added for FPC and Goodix fingerprint Sensors.
Included Gcam by default - Gcam-5.1.018-Pixel2Mod-Arnova8G2-V8.3b1
Improved Vibration Patter.
Improvements in system smoothness.
Battery life should be improved - Yet to be tested.
Auto Brightness Values fixed - Taken from pie stock.
Increase volume step levels - Gives more precise control now.
Added changes from kushika's and flex's kernel tree.
Dropped Enforcing Selinux From this build onwards. (FP fixes)
Many more under the hood changes for smoothness, performance and usability that will take long enough to write.
Changelog(07/01/2109)
Added two Gcams - pixel 3 and pixel 2.
Added Partial ScreenShot In Qs tiles.
Added Pixel Sounds.
Rounded Edges Added with custom settings.
Removed Sluggishness and jerks.(Rom is smoother now)
Fixed Disable Hardware keys option.
Yet again changed Volte icon.
Carbon Gestures for Three finger ScreenShot
Iniline with crDroid Changes.
Upstreamed Kernel to 4.9.148(Battery backup seems improved)
Under the hood changes for Battery Backup.
Few Under the hood optimizations.
(I have added user requested featutre , left features will be added in future builds)
Changelog(13/01/2109)
Bumped Kernel to 4.9.150
Security Patch Level 5 january
Update overlays of config from tissot PKQ1.180917.001
Update power profile from tissot PKQ1.180917.001
Fixed fpc again.
Inline with crDroid chnages
Changelog(18/01/2109)
--KERNEL SIDE CHANGES--
INFINITY Kernel
Upstreamed to 4.9.151
Added Blu Schedutil Governor
Added Boeffla Wakelock Blocker
Enforcing
Optimizations for Added smoothness and performance
--ROM SIDE CHANGES
Inline with CRDroid changes
QS Styles added
Fixed translations
Fixed FMRadio crash on saving stations
--DEVICE SIDE CHNAGES--
Rebased sources - Better stability
Fixed Double tap to wake toggle
Configs and Power profile updated from stock pie
Update Ims.apk from stock pie
Tweaked for improved smoothness
Changelog(21/01/2109)
New kernel in collaboration with Cheewaca - Extreme Infinity
Cpu overclocked slightly : 625-2323 MHz (Feel the added smoothness)
Gpu overclocked slightly : 133-700 Mhz
Undervolted for increased battery backup (You will really feel the diff.)
Fsync control
The kernel is specifically optimized for crDroid builds of tissot.
Changelog(12/02/2109)
First OFFICIAL Build
In line with crdroid v5.1 changes
Brought back battery profiles
Fixed Whatsapp Camera Bug
Removed Gcam3 for stability
Added Dirac and Mi sound enhancer
Added Wifi DIsplay
Many new customizations
Upstreamed kernel to v4.9.155
Added Battery optimizations
Added Memory optimizations
Changelog(02/03/2019)
--DEVICE SPECIFIC CHANGES--
Improved boot times
Improved app loading and installing time.
New dpi
Fixed ims registration
VoLte icon fixed for all firmwares
Wifi calling enabled
Fixed Gcam from previous build
--ROM SPECIFIC CHANGES--
Pie control
Switch style preferences
Network indicator fixed
Weather on lock screen
Full Gesture Navbar
Few under the hood fixes for thermals and more
--KERNEL SPECIFIC CHANGES--
Bumped to version 4.9.161
Few optimizations

Ss please OP!

It says its for Redmi Note 4, not Mi A1. And is it official?
Download links point to mido. Our device is Tissot. What the heck?
 @Nickinfinity

Fractals said:
It says its for Redmi Note 4, not Mi A1. And is it official?
Download links point to mido. Our device is Tissot. What the heck?
@Nickinfinity
Click to expand...
Click to collapse
was just setting up thread
its unofficial as of now

Nickinfinity said:
was just setting up thread
its unofficial as of now
Click to expand...
Click to collapse
Great job, I'm glad we finally have a maintainer for best rom ever!

kalkan001 said:
Ss please OP!
Click to expand...
Click to collapse
Added

Can I update from 4.7.2 without deleting data?

ismael chamorro said:
Can I update from 4.7.2 without deleting data?
Click to expand...
Click to collapse
No, that was oreo and it is pie. You have to clean flash

wonderful rom, even so I can not make substratum work

not at all booting , getting blank screen after flashing rom,gapps and magisk..do we need to install any firmware?
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
was able to boot 4.7.2 and followed the same flash process
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
in think default recovery (lineage recovery) is missing in V5 rom

akashavel said:
not at all booting , getting blank screen after flashing rom,gapps and magisk..do we need to install any firmware?
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
was able to boot 4.7.2 and followed the same flash process
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
in think default recovery (lineage recovery) is missing in V5 rom
Click to expand...
Click to collapse
please flash november firmware as well

ismael chamorro said:
wonderful rom, even so I can not make substratum work
Click to expand...
Click to collapse
Substratum is working absolutely fine. I am using it myself. Make sure u use the latest substratum apk from telegram channel.
Here are screen shots

Nickinfinity said:
Substratum is working absolutely fine. I am using it myself. Make sure u use the latest substratum apk from telegram channel.
Here are screen shots
Click to expand...
Click to collapse
akashavel said:
not at all booting , getting blank screen after flashing rom,gapps and magisk..do we need to install any firmware?
---------- Post added at 04:03 AM ---------- Previous post was at 04:00 AM ----------
was able to boot 4.7.2 and followed the same flash process
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
in think default recovery (lineage recovery) is missing in V5 rom
Click to expand...
Click to collapse
I cleaned flash the ROM just to check your issue. The ROM is booting perfectly fine for me. Make sure u use the latest firmware(Nov).

Nickinfinity said:
I cleaned flash the ROM just to check your issue. The ROM is booting perfectly fine for me. Make sure u use the latest firmware(Nov).
Click to expand...
Click to collapse
Pls provide link for Nov firmware..pls add note in post #1 and also give link

Camera features
Does Portrait mode for front camera available?

Roms is ???:good:

Hello can you tell me how is the lte network Stability?

Is seamless OTA working?

[ROM][PORT][10.0.0] OnePlus7 OB 14 [21.05.2020][EOL]

Open Beta Ports for
OnePlus 6T!
••OnePlus 7 - Open Beta 14••
••OnePlus 7T - Open Beta 2••
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another ROM created by "Jay's Dev Team"! With this Dev Team we will be able to provide ports for devices like 6T or 7 Pro, with the help of maintainers that will test everything and keep everything up to date! This way ports will be more stable, support won't be randomly abandoned anymore and I will be able to focus on more ports and once OP6 gets proper full port, 6T will get it afterwards too!
This thread will be mostly updated by MounirHero (Matrix).
Features:
Stock OnePlus 7 OxygenOS Open Beta 14 /Android 10 Firmware
Debloated
Automated Flasher
Performance tweaks
Improved system stability
Prebuilt Latest twrp 3.3.1-32 by Mauronofrio
Horizon lights
Prebuilt Magisk core
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
•Stock Dolby
Use MagiskHide 7 Pro (10) module to get certified (Netflix)
CHANGELOG:
•Fixed Notch hiding issues
•New Clock Styles for ambient display
•Security Patch Level: 2020-05
•OxygenOS Version: OnePlus7 - Open Beta 14
•All op7 ob14 update features
•Updated overlays
•Updated to latest Open Beta
•OnePlus 8 pro Live Wallpapers (Addon folder)
•Prebuilt latest twrp
•Prebuilt Magisk core (install apk only)
(Old Changelog)
•OxygenOS Version: OnePlus7 - Open Beta 13 - Android 10
•Updated to Open Beta 13
•Security Patch Level: 2020-04
•All changes that came with Open Beta 13
•Updated Android security patch to 2020.04
•Improved system stability and fixed general bugs
•Fixed the crash issue while opening the stock camera App
•Fixed the black screen issue
•Smoother animations
•chromatic reading mode works!
•Prebuilt latest twrp 3.3.1-32 by mauronofrio
How to Install:
NOTE: Backup Your nudes before flashing the ROM this process will completely wipe your storage!
• Flash OOS 10/H2OS 10 (any stock Q)
• Reboot to fastboot and Unlock bootloader.
• Boot Device (don't skip this step).
• Reboot to fastboot.
• Connect phone to PC (Windows / Linux) •
On Windows PC:
• Unpack PORTED_ROM .zip
• If it's your first time flashing → Double Click "Clean Flasher.bat" (it could take 5-10 minutes to flash)
• Phone will boot automatically in Ported Firmware.
• Enjoy!
On Linux PC:
• Unpack PORTED_ROM .zip to a folder of your choice.
• Open Terminal, type "cd /home/..../your rom folder".
• If it's your first time flashing → type "sudo sh clean_flasher_linux.sh" (it could take 5-10 minutes to flash).
• Phone will boot automatically in Ported Firmware.
• Enjoy!
------------------------------------------------
[/LEFT]
-Flashing could take 5-10 minutes (Based on your PC/Laptop)
-install magisk for root.
-Additional system apps in the ADDON Folder (Install as normal apk)
Mega Folder
(ob13 and ob14 from mega folder requires 'EPR' so make sure to follow epr guide before flashing the rom)
Google Drive Mirror
OnePlus 7T OB2 BUILD(sep. 2019)
•mirror1
• mirror2
Warning! DO NOT flash OP7-7t OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
Mauronofrio for twrp.
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!

XDA:DevDB Information
[ROM][PORT][10.0.0] OnePlus7 OB 14 [21.05.2020], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS OPEN BETA Q
Based On: OxygenOS
Version Information
Status: Stable
Created 2019-09-22
Last Updated 2020-05-24

it took a lot of effort,
it was my first port on oneplus 6T,
I hope to be able to bring other OEMs roms in the future.
Thank you @ ProtoDevNan0 for following me step by step,
and for giving me so much help. :highfive:
Some screenshots!:cyclops:

Hello Sir ProtoDevNano, been waiting for this, thank you.

7T HYBRID PORT screenshots

This looks promising. Would have flashed right away if Bluetooth was working.

WBT FP?

awesome its available now in 6t. ...
lately i only saw this in oneplus 6 furom
THANKS OP FOR BRINGING IT TO US

Thanks Dev for supporting 1+6t, And here are more testers available for 6t, pls support miui 11 rom tooooooo

Kind sir,
I'm on lineage os 17 android 10. Can you please let me know how to go to DP3 so that I can install this.
Thank you!

kumar akarsh said:
This looks promising. Would have flashed right away if Bluetooth was working.
Click to expand...
Click to collapse
Same here.

First impression is very good. - For me everything works out of the box, except the Video-Camera. Also, the preinstalled TWRP version did not cut it for me. The Storage Structure is the internal OS Structure. So it was impossible for me to install Magsik directly. After sideloading the newest Twrp Zip via Fastboot everything was back to normal. Magisk works fine.

AUSTIN said:
WBT FP?
Click to expand...
Click to collapse
Working exactly like on DP3 in this build
---------- Post added at 11:36 ---------- Previous post was at 11:34 ----------
ceo.mtcl said:
Kind sir,
I'm on lineage os 17 android 10. Can you please let me know how to go to DP3 so that I can install this.
Thank you!
Click to expand...
Click to collapse
http://telegram.me/JaysRoms
Check out our Telegram group for specified guides.
---------- Post added at 11:50 ---------- Previous post was at 11:36 ----------
Phoenix4Life said:
First impression is very good. - For me everything works out of the box, except the Video-Camera. Also, the preinstalled TWRP version did not cut it for me. The Storage Structure is the internal OS Structure. So it was impossible for me to install Magsik directly. After sideloading the newest Twrp Zip via Fastboot everything was back to normal. Magisk works fine.
Click to expand...
Click to collapse
Will be fixed on future build thanks for reporting:fingers-crossed:

Should this work with the T-Mobile version of the phone?

riazsudeen said:
Thanks Dev for supporting 1+6t, And here are more testers available for 6t, pls support miui 11 rom tooooooo
Click to expand...
Click to collapse
As soon as MIUI 11 will be out officially. I'll send my patches to Mounir and soon after that build will be released Pixel 3XL/4XL etc will be ported too.

I have a problem
I am in DB3 flashed the command "fastboot flash boot test-twrp-3.3.0-Q-fajita.img" TWRP and dsn loud instructions in TWRP booted.
Now the problem has only folders with numbers and letters in twrp, can not over twrp from phone copy.
What did I do wrong

Zimty86 said:
I have a problem
I am in DB3 flashed the command "fastboot flash boot test-twrp-3.3.0-Q-fajita.img" TWRP and dsn loud instructions in TWRP booted.
Now the problem has only folders with numbers and letters in twrp, can not over twrp from phone copy.
What did I do wrong
Click to expand...
Click to collapse
Nothing wrong it's an encryption issue with the recovery, I suggest you to sideload latest Mauronofrio twrp installer so everything Will be fine

MounirHero said:
Nothing wrong it's an encryption issue with the recovery, I suggest you to sideload latest Mauronofrio twrp installer so everything Will be fine
Click to expand...
Click to collapse
are the newer twrp synonymous for android q?

Does it require to resize the partition?

Zimty86 said:
are the newer twrp synonymous for android q?
Click to expand...
Click to collapse
You can't flash twrp with fastboot method since Q Is your OS, @ProtoDeVNan0 prebuilt Bluespark in the build, but It can't decrypt, Mauronofrio twrp 3.3.1.8 Is working flawselly, so I suggest you to sideload It if you want to root and flash stuff by your own.
---------- Post added at 16:12 ---------- Previous post was at 16:11 ----------
rob_z11 said:
Does it require to resize the partition?
Click to expand...
Click to collapse
No EPR tool is not necessary.

kumar akarsh said:
This looks promising. Would have flashed right away if Bluetooth was working.
Click to expand...
Click to collapse
Same here, I need BT to unlock my front door!

[UNOFFICIAL][16.0][TREBLE] LineageOS for Motorola Moto Z2 Play (albus)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (P), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Known issues:
Moto Mods Projector and Hasselblad Camera are unknown to work.
Moto Mods with Battery do not report the battery
VoLTE and VoWIFI not working
Moto Mods:
Moto Mods Projector and Hasselblad Camera are unknown to work.
All the other Moto Mods work, but Battery Mods do not report the percentage in the status bar
Instructions:
Always have a backup of the EFS partition made with TWRP stored somewhere, as you may lose IMEI. Restore it if you get 0 as IMEI when booted into the ROM.
Before installing, make sure oreo was the last stock ROM you installed. See notes below if you come from Stock Pie
Download Official TWRP from twrp.me
Flash the TWRP via fastboot
Enter TWRP, go to wipe menu and Wipe Dalvik, Cache, Data, System and Internal Storage.
In TWRP Wipe Menu, do Format Data, then reboot into recovery
Flash the latest build
Flash eventual GApps and SU addon
Reboot
Downloads:
Latest Unofficial build: AFH
Google Apps: OpenGapps
SU Addon: LineageOS Extra Downloads
Notes
TWRP
If the touchscreen doesn't work when rebooting into recovery, press the power button twice to turn off and on the screen. The touchscreen will now work just fine.
GSIs
This LineageOS build ships with Project Treble compatibility (lite VNDK), meaning you can flash a GSI as System Image from TWRP. Please don't report GSI bugs here, report them instead to the GSI's maker. A Format Data from TWRP is required after flashing a GSI in order to avoid problems.
Technical details on our Treble implementation:
This device is a community-treble device, meaning other devs before us made it compatible with Project Treble (lite VNDK), using the oem partion as a vendor. GSIs still have some problems regarding cpu frequency scaling and camera. You have been warned.
.
Coming from stock pie?
For the sake of simplicity, I said that coming from stock oreo was needed. In reality you just need to flash the oreo modem files. There's a script that does exactly that, made by @juniorpassos: https://mega.nz/file/IRxjGDjL#vkdvh4JcMy-LuWgQz4rHhgpWV80029X4ql0_zcMpVug. The script will erase your userdata and cache.
Before starting this script, make sure you have a backup of your EFS partition stored somewhere safe, outside phone's internal storage. After the backup is done, you can reboot your phone into fastboot mode and start the script. Now reboot into TWRP, go into "Wipe" menu and Format Data. Now you can reboot into the ROM. If you get 0 as IMEI, or any other problem related to RIL, go into TWRP and restore the EFS backup made previously.
Wanna help?
If you find a problem or a bug, please share a logcat with us, alongside an explanation of the problem and steps to reproduce. We won't accept bug reporting without a logcat. Collect logcat with:
Code:
adb logcat -b all > logcat.txt
You can also join our Telegram Channels:
Global: https://t.me/z2play
Ex KVT group: https://t.me/Z2PlayGSI
There's a guide made by a user to install the ROM, written in both Portuguese and English, here it is: https://telegra.ph/Como-instalar-LOs-160-How-to-install-LOs-160-08-04
Thanks
Many thanks to @marcost22 for the pair-working we are doing in this adventure, to @davidsonsjesus for his work on KVT, to @jeferson1979 for his help and teaching. Thanks to all the testers that have helped us testing this ROM.
Sources
Device tree
Vendor tree
Kernel
XDA:DevDB Information
LineageOS 16.0 Motorola Moto Z2 Play (albus), ROM for the Moto Z2 Play
Contributors
EmaMaker, marcost22, rahulsnair, @erfanoabdi @vache @kubersharma @jeferson1979
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: ALBUS_OPS27.76-12-25_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC
Version Information
Status: Stable
Current Stable Version: 16.0
Stable Release Date: 2020-09-27
Created 2020-07-31
Last Updated 2020-09-27

So how's battery? I'm not sure what does it mean:
CPU governorns have some issues. Conservative is recommended for an optimal battery life
Click to expand...
Click to collapse
Also if I run Oreo 8.1 ROM currently and never had Pie installed do I need anything to do before flashing this? Like upgrading firmware or something?

meelten said:
So how's battery? I'm not sure what does it mean:
Also if I run Oreo 8.1 ROM currently and never had Pie installed do I need anything to do before flashing this? Like upgrading firmware or something?
Click to expand...
Click to collapse
Regarding battery: it's quite good, it can get you through the day without any flaws. Since I'm doing frequent tests and I often hook up the phone to the computer, I don't have good screenshots to show you. Will edit the post eventually when I get some. In alternative, you can join the telegram groups and ask someone. We worked on the cpu scaling and governorns and an update will come for it soon.
Regarding firmware: no, you don't have need to update firmware, and updating it may actually cause some problems with RIL. It's perfect if you stay on the oreo firmware.

Changelog
2020-12-08: Cleanup and uprev kernel (3.18.113->3
18.116). Update camera blobs: fix Electronic Image Stabilization, bring back laser focus sensor, fix recording in WhatsApp., fix issues with video recording in Snap cam Fix encryption and decryption (official twrp over at twrp.me is needed for this to fully work). SeLinux is now Enforcing. Update VNDK to full enforcement. Update graphics props. This is the final build for Android Pie 9.0. We will will soon start the Q bringup, and will not be building any Pie ROM anymore, unless some critical bug is discovered: https://www.androidfilehost.com/?fid=17248734326145679504
2020-09-27: Updated Moto Mods blobs. Updated Audio and BT Blobs. Updated media profiles. Thanks to @marcost22: https://www.androidfilehost.com/?fid=8889791610682947394
2020-09-10: Updated Radio blobs and radio init scripts. Workaround for Ambient Display in Q GSIs. Remove batt_health (has been discovered useless): https://www.androidfilehost.com/?fid=8889791610682934965
2020-08-03: Fixed CPU governors. Updated init scripts. New kernel, updated to 3.18.113. Batt_health is back. Fixed offline charge. Updated perf and IOP blobs : https://www.androidfilehost.com/?fid=8889791610682905855
2020-07-29: First beta release: https://www.androidfilehost.com/?fid=8889791610682905855

I'm tempted to give it a try and probably will next weekend but as Z2P is my main phone I want to ask few things:
1. Do fingerprint gestures work?
2. Does notification LED work?
3. Does "active display" (showing notifications and time with locked screen) work?
4. Have you tried it with Magisk? I'd prefer Magisk rather than Addon SU.

meelten said:
I'm tempted to give it a try and probably will next weekend but as Z2P is my main phone I want to ask few things:
1. Do fingerprint gestures work?
2. Does notification LED work?
3. Does "active display" (showing notifications and time with locked screen) work?
4. Have you tried it with Magisk? I'd prefer Magisk rather than Addon SU.
Click to expand...
Click to collapse
1. Work
2. Work
3. The feature you are speaking about is Ambient Display, and yes, that works
4. Yes, magisk works

hi people, nobody is testing it?
i would like to try it, but i can't right now
battery work fine after cpu governors fix?
thanks

I tried today. ROM installs and boots fine but my SIM card is not detected at all (I live in Europe if it matters).
Also, encryption doesn't work. Every attempt to encrypt phone resulted in bootloop.
Can't say much more because without SIM I can't use it and had return to LOS 15.1
UPDATE: I tried restoring ESF partition as well as flashed stock modem as stated in #1 post but with no luck. Even tried install 15.1 first and then flash 16.0 on top of it (without full wipe/format) but it didn't help either. SIM is just not detected.

On-Screen Navigation Bar
I upgraded from the old Official Lineage 15.1 today. I am having a problem getting the navigation bar to show up (Back, Home, App). I search the settings and it hits "Enable on-screen nav bar" in the "Buttons" sub-menu, but when I go there, there is no option shown

Hi. I installed this rom a few days ago from Havoc based in 8.0 and I had to flash modem cause my imei was 0 in lineageos, after this i have signal normally but can't get H+ or 4G, only H. Another problem is that my whatsapp voices notes are recorded with low volume. All the other things work fine, battery, performance, active display, fingerprint and motorola gestures, all it's ok. Great rom!
I would like that the power off menu and quick settings can't be disables in the lockscreen. In third world it would be usefull haha.

Nahuel123 said:
...
Click to expand...
Click to collapse
Did you flash this modem linked in first post? I wonder what your "fastboot getvar all" shows because mine says "baseband: not found". Which is strange to me because on Oreo roms everything works. I don't know if I flashed that modem correctly.

Nahuel123 said:
Hi. I installed this rom a few days ago from Havoc based in 8.0 and I had to flash modem cause my imei was 0 in lineageos, after this i have signal normally but can't get H+ or 4G, only H. Another problem is that my whatsapp voices notes are recorded with low volume. All the other things work fine, battery, performance, active display, fingerprint and motorola gestures, all it's ok. Great rom!
I would like that the power off menu and quick settings can't be disables in the lockscreen. In third world it would be usefull haha.
Click to expand...
Click to collapse
Yeah, first issue is modem, second is audio; both things were updated and are now in testing. So keep an eye out!
And lastly, i dont think that's possible, at least on our side, it seems to be Lineage controlled
---------- Post added at 11:05 PM ---------- Previous post was at 11:02 PM ----------
meelten said:
Did you flash this modem linked in first post? I wonder what your "fastboot getvar all" shows because mine says "baseband: not found". Which is strange to me because on Oreo roms everything works. I don't know if I flashed that modem correctly.
Click to expand...
Click to collapse
There were some issues on modem on the latest release, mostly location-related; so keep an eye out for the update!

My sim card don't work even after I flashed the moden and the .EFS backup, and the device cant connect with the pc via usb when it's turned on.

How to get an on screen navigation bar
How to get an on screen navigation bar:
1. Root phone (I used the SU addon in the OP)
2. Enable navbar with the app "Navigation bar remover/activator (root)" by Conena
3. If you want to customize the navbar use "Custom Navigation Bar" by paphonb (you can reorder buttons freely in "Expirimetal tweaks")
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Does anyone know how i can disable the fingerprint gestures ?

Rigulel said:
How to get an on screen navigation bar:
1. Root phone (I used the SU addon in the OP)
2. Enable navbar with the app "Navigation bar remover/activator (root)" by Conena
3. If you want to customize the navbar use "Custom Navigation Bar" by paphonb (you can reorder buttons freely in "Expirimetal tweaks")
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Does anyone know how i can disable the fingerprint gestures ?
Click to expand...
Click to collapse
Use adb shell as su and run setprop qemu.hw.mainkeys 0

Hey there, I was about to tell a friend to give a try to this ROM instead of phhusson's AOSP v222 to see if by any chances it could solve his trouble with NFC not working.
Therefore can we have any feedback from people here about this? So does the NFC work?
Thanks by advance
And thanks @EmaMaker and others for this work!

voxit said:
Hey there, I was about to tell a friend to give a try to this ROM instead of phhusson's AOSP v222 to see if by any chances it could solve his trouble with NFC not working.
Therefore can we have any feedback from people here about this? So does the NFC work?
Thanks by advance
And thanks @EmaMaker and others for this work!
Click to expand...
Click to collapse
NFC it's not reported in the Know Issues section, hence it's a working feature

EmaMaker said:
NFC it's not reported in the Know Issues section, hence it's a working feature
Click to expand...
Click to collapse
I'm feeling dumb to ask you this, but where is the Known Issues section?

up

OK, IDK how I missed it...

THEREALVENDOR | 復活者 [G610X - 10,11]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to THEREALVENDOR | 復活者 thread!
Please enable "View full thread" if you opening this thread on XDA App.
Code:
Before you get started,
i am not responsible for bricking device, dead sdcard,
false alarm, or even thermonuclear war.
[B]YOU[/B] choose this modification,
IF you point your finger to me to brick your device,
i will laugh at you.
What am i looking right now? is it a ROM? why on the thread it say 11? bla bla bla bla.........
Hey Hey calm down!
This is a Vendor, Based on Samsung Galaxy M10, for Samsung Galaxy J7 Prime.
This spare parts will allow you to boot Android 10/11 GSI.
Did you just say "booting Android 11 GSI?"
Yes. I said it. it can boot Android 11 GSI. BUT we need to talk little bit more about Android 11 on third post.
What about features and vendor specs?
Based on Samsung Galaxy M10 (M105MUBU7CUF1_ARO)
Can boot arm32binder64 (A64) a/b GSI
Can boot incompatible OneUI 2 Ports (J6/A6/M10/Wide3 ports)
Camera2Api is fully working (GSI Only; Not OneUI 2)
Fingerprint (GSI and OneUI 2 Ports that have fingerprint support)
Shipped with AresKernel YMIR (GSI) & Simple Kernel 1.0 (OneUI 2 Mode)
Spectrum Support, even if kernel got replaced
Extra Tools (Will be Explained on fourth post)
NightLight on every GSI you installed
180 rotation on every GSI you installed
Preffered network is LTE by default
Installation (GSI)
You will need atleast TWRP version 3.2.3-0 installed
Download & Copy your favorite GSI, T.R.V., CreateVendor 2.0, GApps and Magisk (Optional but recommended) into USB-OTG or PC
Backup your phone before install (optional but recommended)
Reboot your phone into recovery mode / TWRP
Wipe dalvik-cache, system, data, cache
Flash CreateVendor 2.0
Reboot > recovery
Flash your favorite GSI and then T.R.V. (DO NOT SWAP THE ZIP ORDER)
Go to wipe > Advenced wipe > tick system > Repair or Change File System > Resize File System (re-do this step if TWRP fail to resize the system partition)
Flash GApps (Optional) [Flash magisk too if the GSI does not have SuperSU built in]
Reboot to system
Installation (OneUI 2 Ports)
You will need atleast TWRP version 3.2.3-0 installed
Download & Copy your downloaded OneUI 2 ROMs that does not support J7 Prime, T.R.V., CreateVendor 2.0 and Magisk (Optional but recommended) into USB-OTG or PC
Backup your phone before install (optional but recommended)
Reboot your phone into recovery mode / TWRP
Wipe dalvik-cache, system, data, cache
Flash CreateVendor 2.0
Reboot > recovery
Flash your incompatible ROM and then T.R.V. (DO NOT SWAP THE ZIP ORDER)
Flash magisk too if you want root (Optional but recommended)
Reboot to system
Special Thanks / Credits
@soulr344 and @ananjaser1211 for Display, Camera fix, and CreateVendor 2.0 in general
@UKAz-XDA for Guide on fixing Camera2Api on Android Pie
@SPARTANICUS and @bien2004official for AresKernel 7.0 Reborn, AresKernel OG 2.0, AresKernel Cobalt 6.0 & AresKernel YMIR
@Astrako for Simple Kernel 1.0
@frap129 for spectrum kernel manager
@PingVN for Guide on implementing Spectrum on vendor & Disable HW Overlays automation
@CYPHER7870 @CPTAIN_MEHDI for testing
And of course, all of you
Telegram Groups
Groups
News
Downloads on second post, Android 11 Things on third post, Extra Tools on fourth post, Tips on fifth post.

Downloads
Google Drive
MEGA
Microsoft OneDrive
Dropbox
ASUS WebStorage
PruhMirror™
Kernel Source (AresKernel) | Kernel Source (Simple Kernel)
Filename : trv-1.4.1-ab-20211128-OFFICIAL.zip
MD5 Summary : 523cf2a06bf070b91a72e65a692014ed
Current Version : 1.4.1
Changelogs
Update : Using Simple Kernel 1.0 on OneUI 2 Mode
Update : Using AresKernel YMIR on GSI
Experimental : Pre-Android 12 Support
Update : Removed "Disable HW Overlays" automation on OneUI 2 Mode
Update : Fix TWRP error signal 11 when flashing to the other incompatible OneUI 2 Ports
Update : Fix no CSC/OMC on OneUI 2 Mode
Update : Fix blurry/crushed bootanimation on OneUI 2 Mode
Reserved for Downloads posts

About Android 11...
There's 3 things you need to know before flashing Android 11 on SM-G610. This terms doesn't apply on Android 10.
1. Display bug
Since files for Display-related things are from Android Pie (9), Rotating your screen for example, will make the phone get soft-rebooted. The workaround is enabling "Disable HW Overlays" on Phh Treble Settings. (Settings > Phh Treble Settings > Misc Features > Disable HW Overlays)
2. Google Play Services Spam
Google Play Services will spam the notifications about the device is not certified to run Google Apps. This happen because SafetyNet isn't passed. The workaround is to securize the system, on Phh Treble Settings. (Settings > Phh Treble Settings > Misc Features > Securize) [Make sure you flashed Magisk OR keeping the built-in SuperSU first before tapping the option.]
3. Choosing a GSI
Since Android 11, you need to choose the 'vndklite' variant because the actual M10 Vendor itself use VNDK Lite. They usually named like this : system-roar-arm32_binder64-ab-vndklite-vanilla.img.xz
Reserved for Android 11 Things posts

Extra Tools
There is 3 Extra Tools on T.R.V. you might find it useful.
1. Resolution Changer
If you are a T.R.R. Gaming user, you might familiar with this tool. This tool can change your device screen resolutions. For example, you can use this tool to crank down your device resolution, from 1080p to 720p. Also don't go crazy with this tool.
Usage :
Code:
:/ # res <numbers>
0 = 360p
1 = 480p
2 = 720p
3 = 1080p
4 = 1440p
5 = 2160p
2. Force "user setup = complete"
This tool will let you to bypass SetupWizard. This tool is useful for some GSI that have broken GApps inside it.
Usage :
Code:
:/ # force_setup_complete
3. LogGet
This tool will let you take logs from the GSI very easily. Extremely useful when reporting bugs.
Usage :
Code:
:/ # logget <time>
"Time" is how much second you want to Android LogCat taking logs from the device
Reserved for Extra Tools posts

Little bit of tech tips...
This tips is based on my experience flashing and testing some GSI's, I'm sorry if this tips little bit misleading for you.
1. SafetyNet
Remember that SafetyNet that i talked with you on Android 11 Posts? it can be applied to Android 10 GSI too! Oh yea, if the menu does not work, type this on terminal emulator with root :
Code:
:/ # sh /system/bin/phh-securize.sh
2. Terminal Emulator
For accessing those extra tools, you need a terminal emulator, if the ROM does have Local Terminal at developer options, you can use it, but if it doesn't, it's a good idea to keep a terminal emulator apk on your SD Card.
3. Wallpapers
Sometimes applying a high-resolution wallpaper lags the phone. You can change it to lower one or compress it with 3rd party apps.
4. Phh Treble Settings
Since GApps on Android 11 is really annoying, you might need to keep the Phh Treble Settings App installed on your phone to securize the system.
5. Navigation Bar
Some GSI Provider broke the Back, Home, and Recent Apps keys. That is why i keep the Navigation Bar turned on. if the GSI have Back, Home, and Recent Apps keys working then you can disable navigation bar on Phh Treble Settings. (Settings > Misc Features > Force Navigation Bar disabled)
6. Android itself
Android 11 GSI is still too early at this time, so it's recommended to stay on Android 10 GSI.
7. Reduce screen delay
This is the typical problems on SM-G610 when come into AOSP-Based ROMs/GSI, you can reduce it by setting up the "Notifications on lockscreen" to "Don't show any notifications", Setting up fingerprint, and setting up the "lock after screen timeout" to immediately. or... just use SOD Killer to fix screen delay issue
8. Spectrum
If you didn't like my spectrum preset and you want to tune the kernel yourself, you can just delete this file :
Code:
/vendor/etc/init/init.spectrumcore.rc
9. OneUI 2 Ports
Since i add support for TwoUI, you can actually boot any arm32binder64 vndklite OneUI 2 Ports shared on this exynos7870 community. Even if the ports is not designed for J7 Prime! But, of course, since the ports is not designed for J7 Prime, there's may some bugs there and there. Or if you just want to fix some bugs on your current ROM, like brightness slider. And for developer that just stepped in to J7 Prime development, T.R.V. can help yoou boot your own TwoUI Ports without worrying anything! but of course without a working bluetooth since there's a trust issues in the community. For more info about using T.R.V. on your own ROM, please tag me at the discussion group.
10. SM-G610 Single SIM
I just realized there's a version of SM-G610 thats only support Single SIM, and this breaks their IMEI because the vendor is designed for Dual SIM version of SM-G610. To fix this, go to /vendor/build.prop and edit/add this parameters :
From
Code:
ro.multisim.simslotcount=2
To
Code:
ro.multisim.simslotcount=1
11. GSI Provider
Since GSI Provider have their own patches, i will listing some GSI Provider that give us the most stable experience on SM-G610.
Android 10 / Q :
@phhusson GSI releases
SKULSHADY Havoc-OS GSI
Andy Yan LineageOS Personal Builds
eremitein GSI releases
Android 11 / R :
@phhusson GSI releases
eremitein GSI releases
Andy Yan LineageOS Personal Builds
Braira's GSI releases
Reserved for Tips posts

nice work my bud

Very Stable on android 11
If you can pls made arm64 version for supporting a big type of AOSP rom
Thanks for your excellent vendor
You revive life for J7 Prime phones

Does android 10 gsi has screen on delay bug ?

MarkTejo said:
Does android 10 gsi has screen on delay bug ?
Click to expand...
Click to collapse
Yea this problem available for all AOSP roms on J7 Prime

The vendor is so smooth and stable in crdroid 7.4 GSI.
Only a little bug like rotation screen make soft reboot and random reboot every moment. But if you change kernel to simple v2 no more random reboot.
Hope there is a new update for this vendor.

andikanexon said:
The vendor is so smooth and stable in crdroid 7.4 GSI.
Only a little bug like rotation screen make soft reboot and random reboot every moment. But if you change kernel to simple v2 no more random reboot.
Hope there is a new update for this vendor.
Click to expand...
Click to collapse
What crdroid you are use? I can not found crdroid a64_vndklite

AM.Ohadi said:
What crdroid you are use? I can not found crdroid a64_vndklite
Click to expand...
Click to collapse
Im using this gsi name : crdrom-v302-210315-a64-bgZ-lite.img.xz
Link in the 4th post by eremetein

Sar is it possible to make the charging/notify led works on this vendor? Like the way you added fingerprint scanner since M10 doesn't have it. (i'm not a dev or porter so pardon me sar).
Currently I'm running Havoc 3.12 with this vendor, very stable, no any major bug encountered so far.
Oh and I don't know if this doesn't true on Android 11 or not but on Havoc 3.12 I had to use the command: /vendor/bin/res <value> ...to get the res tool works, I wonder if this only happen on android 10 only?
Thank you for your hardwork sar.

Tested on CrDroid 6.11 (Q) and it works mostly fine. Ares kernel switches big cluster to max 1794 automatically though when phone is woken from sleep and this causes the random reboots. Also, it's good if we can enable the charging/notification led. Longest screen on delay is 20 seconds.
Also recently tested on HavocOS 4.3 (R) and experience is really stable apart from the ares kernel problem with auto-switching to higher frequency on the big cluster thus random reboots happen. Also, securize in PHH Treble Settings doesn't work but the terminal method works just fine. The system UI tuner in PHH Treble Settings is also flaky and doesn't seem to fully work and the accent color for UI reverts every reboot to default (blue). Navigation bar settings when accessed in PHH Settings crash the settings as well. Longest screen-on delay is 5 seconds.
And of course this might be gsi-related but wifi dropouts do occur and might be the kernel might not.

andikanexon said:
The vendor is so smooth and stable in crdroid 7.4 GSI.
Only a little bug like rotation screen make soft reboot and random reboot every moment. But if you change kernel to simple v2 no more random reboot.
Hope there is a new update for this vendor.
Click to expand...
Click to collapse
Dude where to download the simple kernel version 2???

singh54 said:
Dude where to download the simple kernel version 2???
Click to expand...
Click to collapse
Here you go (credits to Astrako for kernel):
THEREALROM | 復活者 - Treble Edition [G610X - 10]
Welcome to THEREALROM | 復活者 - Treble Edition thread! Please enable "View full thread" if you opening this thread on XDA App. Before you get started, i am not responsible for bricking device, dead sdcard, false alarm, or even thermonuclear war...
forum.xda-developers.com

Mightx said:
Tested on CrDroid 6.11 (Q) and it works mostly fine. Ares kernel switches big cluster to max 1794 automatically though when phone is woken from sleep and this causes the random reboots. Also, it's good if we can enable the charging/notification led. Longest screen on delay is 20 seconds.
Also recently tested on HavocOS 4.3 (R) and experience is really stable apart from the ares kernel problem with auto-switching to higher frequency on the big cluster thus random reboots happen. Also, securize in PHH Treble Settings doesn't work but the terminal method works just fine. The system UI tuner in PHH Treble Settings is also flaky and doesn't seem to fully work and the accent color for UI reverts every reboot to default (blue). Navigation bar settings when accessed in PHH Settings crash the settings as well. Longest screen-on delay is 5 seconds.
And of course this might be gsi-related but wifi dropouts do occur and might be the kernel might not.
Click to expand...
Click to collapse
Offline charging work on Havoc 4.3 ?

TienDung0402 said:
Offline charging work on Havoc 4.3 ?
Click to expand...
Click to collapse
To some extent I suppose? I am treated with a frozen blank white-ish screen when plugging in the device when off but at least it isn't rebooting to recovery. Still not fully fixed though so we might need to wait for future releases for offline charging to work on GSI's..

Does anyone have a solution for the echo in calls for j7 prime 610f?

yahiaashraf111 said:
Does anyone have a solution for the echo in calls for j7 prime 610f?
Click to expand...
Click to collapse
What GSI rom are you using? Maybe it's a problem on that rom?

Development [ROM][AOSP][13.0][UNOFFICIAL][sweet] CherishOS v4.8 [22/06/2023]

Features / Changelog 2023-06-22
- Fixed bootloop on 3rd party kernel flashing (give a try to included one!)
- Ripple Effect on fingerprint unlock disabled by default (laggy on sweet)
- Some sepolicies improvement
- Kernel:
-- Upstreamed to 4.14.319
-- Added initial support to LN8000 charger (needs testing)
-- Switch to strep_wise thermal governor
-- Energy model recalculated and non-efficient freqs removed
-- Added initial support to FTS_TS touchscreens (no idea if works, needs testing and feedback)
Features / Changelog 2023-06-18
- Changed base kernel
-- Older version based on Vantom 13 branch
-- Newer version based on Vantom courbet-13-KSU
-- The reason is a pair of fails with touchscreen that forced me to reboot.
-- Enabled AUDIT to see selinux auditing on logcat.
- Introduced my own TWRP.
Features / Changelog 2023-06-15
- Gapps version passes SafetyNet out-of-the-box, even using KernelSU app to root. Banking apps work fine and can be used to pay with Google Pay. Other configs (Vanilla + Gapps, or with Magisk) must be checked.
- SoftAP:
-- Add AP band preference
-- Add list to select Country Code spoof
-- Extend funcionality to QS button
- Launcher3:
-- Modded CherishOS base
-- New app icon and modified name
-- Import widget overlap from Lawnchair
-- Switch from Google's Smartspace to Quickspace
-- Option to force monochrome non-themed icons
- ThemePicker:
-- Changed to moded ProtonPlus base
-- Allow color picker on vanilla versions too
- System:
-- Removed keyguard Google's Smartspace
-- Add Omnijaws Weather API
-- Add Jelly browser on vanilla version
-- Add latest MIUI Camera from V14.0.3.0.TKFEUXM
- Selinux Enforcing
- Vendor:
-- Blobs updated to V14.0.3.0.TKFEUXM
- Kernel:
-- Updated to 4.14.318
-- Added KernelSU support

Reserved

OK, this looks better than crDroid. Plus, I won't have to use adb sideload to install it! I like that the Pixel launcher is replaced... dislike that launcher a lot! Time to give it a try.

Well... let see if you need or not adb sideload... maybe the installation instructions must be modified with user feedback.
It's known that FDE devices wont recreate /data/media folder so you cannot use internal storage to copy rom and install it.
I always recommend better to "adb push" the rom file to recovery. Also you can use USB-OTG or SDCard.
In my case, I always go unecrypted. In that case, switching roms is easier as internal storage never get lost between roms.

Also, maybe you can:
- Copy ROM to your internal storage.
- Do a factory reset (don't format data)
- Flash the new ROM (Gapps, Vanilla + Gapps, with or without DFE-NEO, with or without Magisk...)
- Format data
In this case internal storage will be recreated on first boot, and rom is actually inside.

I've modified flashing instructions to avoid adb-sideload or other methods.
Remember that you always can use SDCard or USB-OTG to avoid internal storage problems.

I never attempt to use internal storage to install ROMs, though I found today a YT instruction video for mojito on the RN10 (not RN10P) where he uses TWRP to manually recreate a data/media folder by typing it in using the "Open terminal here" functionality in TWRP, then he installs it from internal, which is bizarre because mojito has a dedicated external SD slot.
I am aware that internal data is recreated on first boot, which is another reason why I just skip attempting to install from internal SD. I was having problems on crDroid since it refused to read my external SD card which was formatted in exFat FROM THE PHONE! I had to format it in NTFS from Windows before it would read it, and crDroid is annoying in requiring adb sideload to install its ROM.
Thanks for your helpful info and suggestions. I appreciate your effort! Now I just need to give this ROM a once-over.

Interesting the way to recerate /data/media... but if you go encrypted... it will destroy it on first boot.
CRDrind problem with sdcard seems to be kernel related. So tell me if my rom works with it. Maybe I can modify config on kernel or add some drivers.

Huexxx said:
Interesting the way to recerate /data/media... but if you go encrypted... it will destroy it on first boot.
CRDrind problem with sdcard seems to be kernel related. So tell me if my rom works with it. Maybe I can modify config on kernel or add some drivers.
Click to expand...
Click to collapse
There is no optional kernel for crDroid today that I am aware of. I did notice some recent XDA kernels warn emphatically that MIUI kernels are not supported right now for some reason, and crDroid uses an MIUI kernel. (the others only support OSS kernels)
I repaired an issue with deep sleep by installing their firmware *.12 update for V13 MIUI, which thankfully remained on their *.02 V14 MIUI firmware install. Not sure if the mojito video was unencrypted, but he did suggest users turn off Screen Lock in MIUI before beginning, so perhaps it was. It won't matter if data is destroyed anyway since the ROM install procedure that he used was successful - next time, he'd have to go the "long way around" procedure again instead of just using the external SD, which works and destroys nothing on it. I never install unencrypted, and as long as I can read the external SD, I won't need to change that.

You cannot jump between different encrypted roms AFAIK, because every rom uses his metadata.

Quick question: where is the control to reverse the buttons for Back and Recent Items?

Idk man, to be honest I always use full screen gestures. I'll look but it should be on Cherish Settings.

Huexxx said:
Idk man, to be honest I always use full screen gestures. I'll look but it should be on Cherish Settings.
Click to expand...
Click to collapse
This is ALWAYS the hardest to find setting in all ROM's. crDroid hides it too. I have yet to find it!

Found.
Cherish Settings -> Buttons -> Invert 3 button navigation bar

FYI, I like that this unofficial CherishOS is keeping MIUI cam -- one of the few reasons I've stuck with Xiaomi.eu.
But does it work on Focaltech (fts_ts) touch devices?

No man... Sorry. In fact the ROM should give error when flashing thanks to an assert.

I have one idea... Maybe using stock kernel...

pnin said:
FYI, I like that this unofficial CherishOS is keeping MIUI cam -- one of the few reasons I've stuck with Xiaomi.eu.
But does it work on Focaltech (fts_ts) touch devices?
Click to expand...
Click to collapse
I've tried some attempts to make stock kernel run on my rom without sucess...
I've tried to inject it with anykernel3 but there's something on dtb that is ****ing up everything... ROM boots but a lot of FCs everywhere so no way ATM to make that work.
You must wait for proper fts_ts drivers integrated on kernel sources.
Sorry.

pnin said:
FYI, I like that this unofficial CherishOS is keeping MIUI cam -- one of the few reasons I've stuck with Xiaomi.eu.
But does it work on Focaltech (fts_ts) touch devices?
Click to expand...
Click to collapse
Huexxx said:
I've tried some attempts to make stock kernel run on my rom without sucess...
I've tried to inject it with anykernel3 but there's something on dtb that is ****ing up everything... ROM boots but a lot of FCs everywhere so no way ATM to make that work.
You must wait for proper fts_ts drivers integrated on kernel sources.
Sorry.
Click to expand...
Click to collapse
correct me if i am wrong... since sleepy kernel seems to have fts_focaltech drivers integrated (take a look at its github source below) https://github.com/itsshashanksp/kernel_xiaomi_sm6150/tree/t13/drivers/input/touchscreen
does it mean that if i flash it with any rom it will make focaltech screen work with it including your cherishos ??

Database Develop

welcome