Database Develop

[GAME] Flight commander working on Samsung Omnia II i8000

If you've tried to play this game on omnia i8000 you had find out that it runs very bad, planes are crazy and it's unplayable.
I've succeded on make it work (more or less).
Following the instructions in the thread http://www.modaco.com/content/i8000...46/flight-commander-runs-choppy/#entry1548800 on modaco, and adding some simple mods.
Installing:
1. Download and install the game.
2. Download and install the modified opengl 1 form modaco:
http://www.modaco.com/content/i8000.../opengl-es-3d-drivers-v1-compatibility-layer/
3. Download and install in the game intallation directory the libgles_cm.dll that you can find here: http://sourceforge.net/projects/omnia2gl/files/
4. Run the game and enjoy .
PROBLEMS:
Blank map Screen:
The maps are in JPG, all other images are in png. What i've done is convert that images to png and then edit the xml of each map to redirect to the new png image, and voilà.
- Planes are too fast (compared with android version):
Just edit the planes xml to slow them down, just put a lower number.
- How to play again after close it.
After completting a game the menus are blank again and if you exit the game and then open it again, it shows an error with the dll, and you can't run it again until you reset your device.
I have no sollution to this one, but if anyone can help us .
It's not perfect but it's playable, of course android version it's better.
Enjoy it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i installed yesterday, sometimes blank(white)screen, sometimes normal ! even on blank screen i can play it! when touch the airplane shows landing arrow!

if you touch forward button (bottom at the left) on the screen, the planes fly faster, touch button again everything normal !!!

If you say it because the note that i posted about the fast planes, i mean taht planes in normal mode are too fast.
Can you tell me wich is your record (i think i'm soo bad).

Thank you, this works perfect

The Wars - HD7-B3 Conversion

Decided to have a go at my first bit of dev (if you can call it that ), by converting a game designed around SDK2 and bringing it to the Streak7's Honeycomb screen, It is similar to Cartoon Wars for the iPhone but nowhere near as good.....But it passes the time and can be quite addictive on the hardest setting!
I decided to do this as my youngest lad loves this type of game (as I do too ) I could not find a version other than the ones designed around a small screen device, although the original runs on the Streak7 it displays a small game, also it was an excuse to learn something new
The original game would scale up when the LCD density was set to 160, but this version scales up & lets you keep DJ_Steve's recommended 106 density setting for his HD7-B3 OS, I have not tried it on any other device other than the Streak7 or any other OS other than HD7-B3, so feedback would be appreciated on other Device/OS combo's.....Although I don't expect it to work on anything else other than Streak7-HD combo
The overall process was time consuming to say the least, mostly in the latter stages of fine tuning the .png sizes for paticular images, too big and the game wouldn't load, too small and it left empty bits of screen everywhere.
The programs I used to help me achieve my goals where:
APKTOOL - by Brut.all - For the decompile/recompile of original .apk (must have tool )
.XML Editor - For the obvious
IMAGE CONVERTER PLUS - A brilliant program for batch image conversions that can be profiled to your specific needs
AUTO-SIGN by Dave Da Illest 1 - Which enables you to sign your recompiled .apk (does what it says on the box )
Anyway, have a try for yourself and let me know your results
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Or
CLICK HERE

Force closes on 2.2.2
Sent from my Streak 7 rocking the Streakdroid7 ROM

Gravityrat said:
Force closes on 2.2.2
Click to expand...
Click to collapse
....As I expected TBH, I rekon the original would work just fine though, but posting that would of been outright piracy IMHO, this is more of a screen mod of the original that is based around the 106 LCD Density setting of HD7, I could of created a few drawable-XXXX folders for the different res, but then this just takes the file size to rediculous levels.
Many thanks for taking the time trying and replying anyway, much appreciated, button pressed!

Google TV set top box

Hi all, I've just bought i Google TV set top nox Called R-box.
http://onhong.en.alibaba.com/product/465052283-212567859/Internet_Smart_Google_TV_Box_RB_101_.html
R-Box specification
Memory a) DDR3 512MB b) NAND flash 4GB(NAND flash canbe extended)
Chip RK2918
OS Android 2.3 or higher version
Power 12V DC
Audio/Video output HDMI 1.3 (CVBS will be supported)
Peripheral Interface IrDA (IrDA and Bluetooth can be used for remote control)
Bluetooth
USB device*1
USB host*1
SD/TF card
Net Interface WIFI 802.11G/N (4g LTE will be supported)
Rj45 10/100 BaseT*1
Processor
ARM Cortex-A8.
Max 1.2 GHz.
55 nm technology.
ARM architecture v7-A instruction set.
Embedded NEON for multimedia processing.
Multimedia
Image & Video Processor
Image post processor 2D Graphics Engine
Image pre processor 3D Graphics Engine
1080p 30fps Video encoder JPEG Encoder
(H.264) (90Mil pixels/s, 4672x3504)
1080p 30fps Video encoder JPEG Decoder
(H263/H264/MPEG2/MPEG4/ (76Mil pixels/s, 8176x8176)
VC-1/VP8/RMVB/AVS)
Pretty much the same thing as many of the new china Tablets .
The firmware uses cramfs , but I've found another firmware that works,,,, BUT since it's made to be used with a touchscreen no USB or remote is working.
Is there anyone who has an idea on what to to..
The firmware i used to flash the box with is rooted and that's really all I need.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Haha
Very cute . But I'm not sure if it was so helpfull...

Meh - just reread the question. If you can't install anything on it then I don't see what you can do. Reflash back to stock and leave it in a working state.

Well
I don't agree... I currently have the stock FW installed but I wan't to root the device to make 100% use of the hardware

johncmolyneux said:
If you can't install anything on it then I don't see what you can do.
Click to expand...
Click to collapse
dicksoft said:
I don't agree... I currently have the stock FW installed but I wan't to root the device to make 100% use of the hardware
Click to expand...
Click to collapse
You don't agree? Oh okay.

PSP Issues

I can run all ISO games but bot all CSO games on my PSP, y is that?
For Midnight Club 3 DUB Edition & Midnight Club LA Remix, my PSP can't seems to recognize the CSO file.
I've tried to export the ISO directly from my UMD or dl the ISO from the Internet, n both work very well.
But than every time when I convert my ISO to CSO, most CSO games will show "Corrupted data" while none of the ISO games hv any issues...
Strange...
All four games r CSO files, but strangely 2 of them works perfectly n in this case, only both Midnight Club not working...but in most cases, most CSO not working...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Btw, how can I decompress CSO back to ISO?
I've tried almost all ISO compressors and CSO decompressors, but all of them only takes 1 sec to convert n give me a 0KB iso file which makes no sense...help...

What software are you using to convert your iso's?
If possible, try compressing the iso's less when you convert them.
Back when I had a psp, I remember a couple of games had that issue, and that's what I did to resolve it. Maybe try using a different program to compress your iso's if that doesn't work, or change in your vsh menu from umd to iso mode or one of the other modes.
But I specifically remember having MC3 Dub Edition working as a cso on my psp

huggs said:
What software are you using to convert your iso's?
If possible, try compressing the iso's less when you convert them.
Back when I had a psp, I remember a couple of games had that issue, and that's what I did to resolve it. Maybe try using a different program to compress your iso's if that doesn't work, or change in your vsh menu from umd to iso mode or one of the other modes.
But I specifically remember having MC3 Dub Edition working as a cso on my psp
Click to expand...
Click to collapse
OFW:
6.60
CFW:
6.60 LME-1.5
6.60 PRO-B10
Compression software:
PSP ISO Compressor v1.4
Compression level:
9

Push
Push~~~~

How can I decompress CSO back to ISO?
How can I decompress CSO back to ISO?
I've tried almost all ISO compressors and CSO decompressors, but all of them only takes 1 sec to convert n give me a 0KB iso file which makes no sense...help...

Emui 10 - desktop mode / easy projection

Hello.
Has anyone tried using deskop mode in emui (beta) 10? Are there any changes?
Thanks in advance

Basically desktop mode works, but I miss keyboard when I connected mouse only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Chrome blackout ribbon tabs after scrolling down
Hello,
i have a trouble with Chrome on EMUI Desktop 10. When I scroll at the end of the web page every time Chrome blackout ribbon tabs. I must close Chrome and open again and than tabs ribbon is visible. I try Huawei P30 and P20Pro with the same result.
Can anyone advise you what to do with it?

Another problem spotted I'm afraid:
I've just installed EMUI 10 on my Mate 20 Pro and noticed that within Huawei desktop mode YouTube videos are capped at 480. Any higher resolutions are not available to select. Using EMUI 9x I could output 1080p60 on my external monitor using USB-C. Very disappointing and hope this gets fixed soon, unless someone else has a solution?

And also in netflix there is only audio with black video, why is that? Widevine L1 should allow 1080p streaming..

This simply happens if you're using incognito mode.
The screen will appear but the link and tabs won't appear. (Even regular screenshot won't work)
Try using standard mode of Chrome tabs then try again.

Yoiii567 said:
This simply happens if you're using incognito mode.
The screen will appear but the link and tabs won't appear. (Even regular screenshot won't work)
Try using standard mode of Chrome tabs then try again.
Click to expand...
Click to collapse
My problem is in normal mode, not incognito.

MysteriousStranger said:
And also in netflix there is only audio with black video, why is that? Widevine L1 should allow 1080p streaming..
Click to expand...
Click to collapse
same issue.
it will not work through the app or through chrome.
could it be a drm issue rather than a bug?