Database Develop

[TREBLE][10.0][arm64] H-VENDOR V1.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-10-06

Reserved

very nice work sar for our old devices

As always, nice work.

Offffffffff finally
Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
OneDrive folder
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-06-16
Click to expand...
Click to collapse
Now my J7 can die in peace after having ARM64 Pie , ARM64 Q and now A/B vendor, Awesome work sar as always
#Saviour_of_7870

Big thanks!

You are awesome developer..

any plans for A520F ?

blunatic said:
any plans for A520F ?
Click to expand...
Click to collapse
Don't get your hopes up. Astrako only works for A3 lol. So don't expect it for your device or any other stuff.

For now, The GSI I have installed is :
AncientOS-Civilization by igor-s7
Just a quick notice
Download Arm64 A/B GSI, not A-Only
I think that is the most stable of them all for now, Although you have to fix the Device Certification error from Google, you can fix this easily though
NOTE : The GSI comes with pre-installed GAPPS, I personally didn't flash OpenGapps on this one
Step 1 : Continue to set up device, ignore all the error showing in the notifications
Step 2 : Go to Google Chrome and download "Device ID"
From there, Go and Copy the Google Service Framework ( GSF )
Step 3 : Tap the notification error, and it should show you 3 options
Now you should pick the "For Custom ROM Users", after that, you will be redirected to Google Chrome.
Step 4 : Paste your Google Service Framework ( GSF ) where it should be, you will then be met by a reCAPTCHA, after that register your device.
Step 5 : Clear Data and Cache of Google Services and Google Play and restart your device.
NOTE : Your device is still not certified, but it makes the error obsolete
For those who are asking, Yes NFC works
And Gaming is pretty outstanding, Camera has some errors sometimes, it is a new built project, so expect other bugs
Thank you again for all the developers who created these projects. Cheers

This is rom for A7 2017 working???
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
Does this rom work for A7 2017 ???

huzunbaz said:
This is rom for A7 2017 working???
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
Does this rom work for A7 2017 ???
Click to expand...
Click to collapse
Do you see it on the list? No? Than not. Different SoC.

Having a really hard time installing other GSI because most of them doesn't really work, like I tried installing Corvus and DerpFest, and it just bootloops, can someone help
But in AncientOS-Civilization it works like magic, no bootloops

Just installed HavocOS 3.6 ROM without Gapps built in, manually installed though. Everything works, no errors so far, I've set up my backups, my apps and nothing is out of the ordinary.

I've tried Andy Yang's Lineage OS builds and while they work perfectly, they lack hardware button enabling. Havoc works just fine too but it lacks hardware button customization.
I'm on Crdroid 6.5 gsi and it has all the customization features, works flawlessly, better than the build provided by Astrako.

Filipe Baltazar said:
I've tried Andy Yang's Lineage OS builds and while they work perfectly, they lack hardware button enabling. Havoc works just fine too but it lacks hardware button customization.
I'm on Crdroid 6.5 gsi and it has all the customization features, works flawlessly, better than the build provided by Astrako.
Click to expand...
Click to collapse
Can send link of the GSI?
Also, I think you can update the Kernel by going to SPART4NICUS' github of AresKernel :good:

Yarida said:
Can send link of the GSI?
Also, I think you can update the Kernel by going to SPART4NICUS' github of AresKernel :good:
Click to expand...
Click to collapse
https://sourceforge.net/projects/treblerom/files/crDRom/2020.04.23/
I'll check spart4nicus

Poll mumm

About the 7870 Exynos SoC and further development:
The Samsung Galaxy Tab A 2016 has same SoC, so I guess it make sense to bundle or exchange knowledge. Maybe both (or better three sides) can learn. Maybe (one can dream) we can get rid of the nasty echo in calls or bluetooth call bugs.
Let's look what @Astrako and the devs for Tab @Valera1978 (who has initiated a lot for this SoC) and @TALUAtXDA will create in next future.

For those trying it with LOS and microG. There is a problem with location provider. For those who need that - better wait. Beside that I am very impressed.
Regarding echo in calls: ATM I am using Treble+LOS16 and my partners did not report echos if I call via telegram. What is the difference and couldn't be used this micro/audio driver for mobile phone calls too?
And for BT calls: Is it same kind of problem? As BT headphones work well (didn't try that with telegram).
Probably it is not a new idea ... so no offence.
Its hard to get a phone in that size and weight, so please keep it alive.

(ROM)(PRISH OS)(M10)(PIE)(PORT)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a full Samsung OneUI ARM port with android version 9.0.
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation.
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
[FOR DEVS] If you want to use this as a base for other exynos7870 Phones. Please ask first, and provide proper credits and links to the original thread.
since i havent got much time to work on this port and to test properly, it might happen that rom doesnt boot at all in that case PM and with proper logs on telegram at @neel0210
Any sort of File Kanging will be reported without hesitation.
As the nature of these ports go, it was a non stop battle for almost 3 weeks straight to get it to this point where all features are working as expected. If you appreacite this work Hit the Thanks button, and consider a Donation.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, don't just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Rebased to Official M105FDDU2BSH2
Updated all hardware libs to comply with recent kernels
Updated GPU Blobs to R28P0 For better performance
Updated Power, memtrack and wifi
Improved RAM and memory to suite our low end devices
Performance improvements related to some libs
Debloated most useless apps
Updated Samsung fonts
Updated camera with new features
Other misc changes
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
BluelightFilter
M10 Wallpapers and multiWallpaper pack
Latest Camera UI
DolbyAtmos
Camera features added
- Live focus fixed for 7870 devices
-Watermark
-Front cam supports HDR and NIght mode
-HEIC option added (beta)
-HDR+
-sports mode
-continuous shot
-rear cam selfie
-Food and much more idr
Heavly optimised for variants
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
VoLTE Support for INS users and countries that use it
Uptodate APN Configration
More features via separate AROMA flashable
KERNEL KRAKEN
GCC version: aarch64-linux-gnu-gcc (GCC) 10.0.1 20200121
kernel: proper hardware GCC optimizations
kernel: removed size optimization
kernel: built with performance optimizations (O3) and other things
kernel: interactiveS9 set as default governor
kernel: interactiveS9: optimized for great performance and decent
battery life
Mali: fixed some timer rates
DEVFREQ: multi-governor support (performance, interactive,
simple-ondemand, powersave and userspace)
DEVFREQ: ported interactive governor from Exynos 7904
Kernel source link
Strongly recommended to use Orangefox recovery by @Astrako
And if you don't have that recovery for your device then go here spam thnx download recovery and then follow below given steps
J7 PRIME Download recovery from here ( DONT FORGET TO PRESS THNX BUTTON)
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device rebootsSetup your rom and READ the F.A.Q for more information.
To Root, Flash the latest Magisk Canary Build after a successful Boot
Imgur Album with ALL photos : IMGUR Album
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@Astrako AKA H-VENDOR's father for his countless discoveries and contribution to Exynos 7870 and helping me in my each and every single spam, you are Awesome SAR
@spartanicus for his nuclear powered kernel to powerup exynos 7870 roms
@Davinash97 for sharing is exceptional knowledge with me and bearing my spam:laugh:
@ananjaser1211 for this camera patch and his contribution to exynos 7870 (for this post base too )
@saifur for making all the required stuff needed for roms and XDA, you're lit bruh!!!!
@axewolf21 for debugging this rom to prime
@ad1yt for his realtime help in everything
to all the lazy ass testers
@ad1yt
@darkweb aka guru
@Jbsjoshua007
And few more that didn't give me their usernames.
if i forgot to mention someone or lack of proper credits PM me on telegram by searching @neel0210
V1.0
-initial release
* note : i know there are some known bugs for me but since i am going through very busy schedule, and too much projects haven't got time to fix them properly and by fixing them there aren't any major bugs iirc but still, as said i didn't tested them all, allowing kang free pass whoever wants to update modify rom they can but first PM me about that and with proper credits u can.
----------------------------------------------------------------
PRISH OS RIP VERSION Based on [LATEST] M105FDDU2BSH2
GDRIVE : FOR J7 PRIME
PATCH : M10 PATCH
(REMEBER PATCH IS MUST AFTER FLASHING ROM, SO DONT FORGET THAT)
Size : 1.1GB
ADDONS : ABLE SOON
AFH : soon
SIZE : unknown
----------------------------------------------------------------
BUGS​
- there is one bug i have noticed in my J7nxt which is present in all variants in settings, the setting lineup is malformed i will try to fix it but due to lack of time, so if anyone have fixed it can PM me, i will credit him with his fix posted here.
- rest fixed on J7Nxt
- other devices you tell me
XDA:DevDB Information
PRISH OS M10 PORT, ROM for the Samsung Galaxy J7
Contributors
neel0210, Astrako, DAvinash97
Source Code: https://github.com/SPART4NICUS/Ares_7870.git
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.1.x
ROM Firmware Required: latest oreo bootloader
Version Information
Status: Testing
Created 2020-07-07
Last Updated 2020-07-07

I will try

Is there a navbar

NO
sooheb said:
Is there a navbar
Click to expand...
Click to collapse
but i will add flashable navbars in patch folder for all

Congrats my dude, nice work and keep it up!

Nice rom, light and simple.
Im flashaholic everytime theres a new rom i always try. Im a tester. Hopefully theres a navigation bar option. I still observing if theres a bug.Thank you for the nice rom and I notice in the setting in the bottom.

danztech said:
Nice rom, light and simple.
Im flashaholic everytime theres a new rom i always try. Im a tester. Hopefully theres a navigation bar option. I still observing if theres a bug.Thank you for the nice rom and I notice in the setting in the bottom.
Click to expand...
Click to collapse
i have flashable zip to enable navbar, just PM me.

I can't find the option to configure the fingerprint

leo31 said:
i have flashable zip to enable navbar, just PM me.
Click to expand...
Click to collapse
I already found the zip.. thanks anyway

Tysm sir
Astrako said:
Congrats my dude, nice work and keep it up!
Click to expand...
Click to collapse
Tanks

Theres no fp
kuzo said:
I can't find the option to configure the fingerprint
Click to expand...
Click to collapse
because M10 doesnt have FP

ideo ?
onde tem o video ?

Front camera is 5mp or 8mp supported,?

installation videos
Where can I find installation videos?????

After flash rom.. it stays in bootloop.

NO
sooheb said:
Is there a navbar
Click to expand...
Click to collapse
Since J7prime has hw buttons, i removed navbars

Rom is treble
AmirRouichi said:
After flash rom.. it stays in bootloop.
Click to expand...
Click to collapse
Must have vendor partition in order to make rom boot

Okay i will make one soon
Dheisinho1 said:
Where can I find installation videos?????
Click to expand...
Click to collapse
Soon you will get links updated here about installation

Rom doesnt change your native cam sensor resolution
Mehedi4000 said:
Front camera is 5mp or 8mp supported,?
Click to expand...
Click to collapse
The camera your device have it will be, same as before i just made m10 cam mods compatible to your device

Vendor partition is must
AmirRouichi said:
After flash rom.. it stays in bootloop.
Click to expand...
Click to collapse
If your device is not treble ready you must flash create vendor file from spaget then flash rom

[ROM][10][TREBLE][ONEUI 2.0] PRISH OS J6Q PORT

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOME INFORMATION YOU SHOULD KNOW​
Galaxy J6 Q Full Port
If u want to Report Any Bug Mention me with Proper Logs
I am not responsible for bricked devices, dead SD card
Please do some research if you have any concerns about features included in this ROM before flashing it!
Any Sort of Kanging Would Reported Without Hesitation
FEATURES​
Deknoxed
Bloatfree
Ram tweaks
RMM - removed
Dolby support
Latest Camera Features
Gboard as system app
BLF
Samsung Facial recognition
Other misc changes
MORE FEATURES​
All the original features are present (Wifi,etc)
Camera Watermark
Latest Camera UI
Heavly optimised for variants
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
VoLTE Support for INS users and countries that use it
More features via separate AROMA flashable (soon)
KERNEL​
H- KERNEL
GCC version: aarch64-linux-gnu-gcc (GCC) 10.0.1 20200121
kernel: proper hardware GCC optimizations
kernel: removed size optimization
battery life
Mali: fixed some timer rates
DEVFREQ: multi-governor support (performance, interactive,
simple-ondemand, powersave and userspace)
You can even go for Ares kernel by @SPART4NICUS
you can download it from here
INSTALLATION​
strongly recommended to use Orangefox recovery by @Astrako
Rom is TREBLE so first you need to flash Create vendor from SPAGET (only if you don't have VENDOR partition)
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK all together)
Flash the ROM.ZIP
Reboot and enjoy and remember first boot will take time.
SCREENSHOTS​
Imgur Album with ALL photos : SCREENSHOTS​
CREDITS​IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@Astrako for giving us the reason to public the roms by fixing bugs like camera and bluetooth, huge respect man without you there is no twoui in 7870
@Davinash97 for sharing is exception knowledge with me and bearing my spam
@ananjaser1211 for his contribution to exynos 7870
@axewolf21 for debugging this rom to prime
@saifur for logos and general help
to all the lazy ass testers
@ad1yt
@kinochan
@Jaxewolf21
@nibiru
@steve_7870
@strix
@dean
And few more that didn't give me their usernames.
if i forgot to mention someone or lack of proper credits PM me on telegram by searching @neel0210
CHANGELOG​V1.0
-initial release
SUPPORTED DEVICES​-J701X - tested
-J710X - tested
-G610X - tested
-J530X - tested
-J730X - untested
-J600X - tested
-A320 - SOON
BUGS​-: NO one is saying this rom is totally bugless but it is so far stable and so far we even got that
- Bluetooth on J710 is still unfixed
- and we haven't tested J730, so the users of J730 are Requested to do inform us about bugs, so that we can get the rom to the stable phase, thnx in advance.
- if you find anything bugged report on given group.
Note : First of all special thnx to @Astrako for bringing and helping in Twoui to make it stable by fixing bugs like camera, bluetooth, idea on Green artifacts and so on, so First many thanks to him and one more imp thing if you're using any kind of fixes from my rom, please do not.
NO ONE is allowed to use a single file from my rom, and if i found any of them from my rom, threads will be reported instantly.
If you find any bugs and wanna report them, visit our TELEGRAM GROUPS
TELEGRAM GROUPS​
CHANNEL | DISCUSSION​
DOWNLOAD​
PRISH OS J6Q PORT Based on J600FXXU7CTC9
Download : SourceForge
-------------------
XDA:DevDB Information
PRISH OS J6Q PORT, ROM for the Samsung Galaxy J7
Contributors
neel0210, Astrako, DAvinash97
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2020-07-24
Last Updated 2020-07-24

Reserved

seem a fine port
I go to see this fine port, until the moment is the ROM that show everything the One UI 2.0 with all tools, it's fine and thanks friend by this amazing work, I wait the next updates and go to report the possibles bugs :good:

the cell phone not know the SIM
I believe that is necessary a multi CSC, because here in America my cell phone haven't signal of telephony is only this bug that I found :good:

how install root?:crying:

very good rom, the only error I found is that magisk doesn't work, it's in bootloop (normal and canary)

It will be fixed soon
kuzo said:
very good rom, the only error I found is that magisk doesn't work, it's in bootloop (normal and canary)
Click to expand...
Click to collapse
Tysm for reporting Guys

You can root it
trash66x said:
how install root?:crying:
Click to expand...
Click to collapse
Try to flash magisk Canary with enforcing kernel

Ofc i will add
Jeffpro12 said:
I believe that is necessary a multi CSC, because here in America my cell phone haven't signal of telephony is only this bug that I found :good:
Click to expand...
Click to collapse
V1 is for the devices just to make sure that once it will get stable phase i could mode then properly, next version will have omc and very soon

Tysm for your kind words
Jeffpro12 said:
I go to see this fine port, until the moment is the ROM that show everything the One UI 2.0 with all tools, it's fine and thanks friend by this amazing work, I wait the next updates and go to report the possibles bugs :good:
Click to expand...
Click to collapse
I will sure look at bugs and try to fix them ASAP.

whatsapp video call working ?

This rom is arm or arm64?

in v1 nope
leo31 said:
whatsapp video call working ?
Click to expand...
Click to collapse
our some users have reported the issue and so far we have tested one fix and it worked so you can expect whatsapp video call to be working in v2

This Rom is ARM
SyntaxDroid said:
This rom is arm or arm64?
Click to expand...
Click to collapse
Based on offical J6Q fw

SyntaxDroid said:
This rom is arm or arm64?
Click to expand...
Click to collapse
Maybe arm32 cz J6 officially arm32

Excellent work, I found some details in 610mn, the front flash can only be activated by moving the options in the selfie, when exiting and re-entering the camera, the same thing happens, you have to move between the camera modes so that you can choose to activate. I am concerned that in "about the phone, battery" battery capacity 2350mAh, being for this model 3300mAh, as an advantage the battery consumption is very slow . Everything else works great, it's smooth and fast, very light, I installed galaxy store, game launch, samsung labs and other apk for optimization and amazingly everything works without errors, very stable. I have not been able to root with any magisk, please provide.

Can give the link of h kernel for a10?

is the best ROM for me, I like the performance and the battery more than any other rom.
The only thing that needs to be fixed is, to be able to do root or SafteyNet CTS Pass, correct the brightness bar because the minimum brightness leaves the screen black, and there is lag in the application drawer (I corrected it using Evie launcher)

How to root?pls reply

Someone who has used this ROM on the G610M, could you tell me, briefly, if everything works?
Apart from the root problem, of course.
I tested several and they look raw, some things work well, others don't. Many are still slow, although they say they are stable

[rom][10][oneui 2] prish os m10 port v2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOME INFORMATION YOU SHOULD KNOW​
Galaxy M10 Q SYSTEM Port
If u want to Report Any Bug Mention me with Proper Logs
I am not responsible for bricked devices, dead SD card
Please do some research if you have any concerns about features included in this ROM before flashing it!
Any Sort of Kanging Would Reported Without Hesitation
FEATURES​
Deknoxed
AROMA INSTALLATION
Bloatfree
Ram tweaks
RMM - removed
Dolby support
Latest Camera Features
BLF
Samsung Facial recognition
Other misc changes
MORE FEATURES​
All the original features are present (Wifi,etc)
Camera Watermark
rootable with magisk
Heavly optimised for variants
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
VoLTE Support for INS users and countries that use it
More features via separate AROMA flashable
INSTALLATION​
strongly recommended to use Orangefox recovery by @Astrako
SYSTEM IS PART OF TREBLE so first you need to flash Create vendor from SPAGET (only if you don't have VENDOR partition)
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK all together)
Flash the ROM.ZIP
AFTER FLASHING ROM.ZIP FLASH PRISH VENDOR V2 ( SINCE ITS ONLY SYSTEM PORT )
Reboot and enjoy and remember first boot will take time.
SCREENSHOTS​
Imgur Album with ALL photos : SCREENSHOTS​
CREDITS​IF you helped in this rom and i forgot you, tell me in a PM or in a reply
[B @Astrako[/B] for giving us the reason to public the roms by fixing bugs like camera and bluetooth, huge respect man without you there is no twoui in 7870
@Davinash97 for sharing is exception knowledge with me and bearing my spam
@saifur for logos and general help
@DEAN for HELPING THE MOST THROUGHOUT THE WORK
@Xgbcx for HELPING THE MOST THROUGHOUT THE WORK
And few more that didn't give me their usernames.
if i forgot to mention someone or lack of proper credits PM me on telegram by searching @neel0210
CHANGELOG​V1.0
-initial release
- BASED on m10 Q FW
- Added support for A3 thnx to @Astrako
- Added Root support with Magisk
- Encryption removed
- Added New Camera mods
- NOW CAN ZOOM IN NIGHT MDOE
- MAX ISO IS 1600 NOW
- SHAPE SELFIE SUPPORT
- LONG EXPOSURE RESOLUTION CHANGED
- HEVC UPDATED
- MUCH MORE WHICH IDK IDC
- Added New Bootamination (SAMSUNG OREO ONE)
- Added some system optimizations
- Dolby support
- Much more idk
- Added GAMING TWEAKS!
- Added TWEAKS FOR RAM MANAGMENT!
- Samsung face Recognition
- HEAVILY DEBLOATED!
- Update Latest Apps!
DOWNLOAD​
PRISH OS M10 Q PORT V2
Download : AFH
MD5 : c1a4c81b1b1104df19c8b798df6e2f23
SUPPORTED DEVICES​
-J701X
-J710X
-G610X
-J730X
-J530X
-J600X
-A320X
BUGS​-: NO one is saying this rom is totally bugless but it is so far stable for daily usage
-: if you find any bugs report in out telegram support group
-: So far we got that ROM has issue of Clock not showing on lockscreen i have shared the fix in my fix folder which is able in my support group so join it and do : /fix_folder you will have links there
Note : First of all special thnx to @Astrako for bringing and helping in Twoui to make it stable by fixing bugs like camera, bluetooth, idea on Green artifacts and so on, so First many thanks to him and one more imp thing if you're using any kind of fixes from my rom, please do not.
NO ONE is allowed to use a single file from my rom, and if i found any of them from my rom, threads will be reported instantly.
If you find any bugs and wanna report them, visit our TELEGRAM GROUPS
TELEGRAM GROUPS​
CHANNEL | DISCUSSION​
DONATIONS​I dont want coffee or anything to wake me up while fulfilling my android addiction your simple one thank in post is enough to make my day, but if you really want to donate then do charity or to the people who suffering in this COVID-19 pandemic.
XDA:DevDB Information
PRISH OS M10 PORT V2, ROM for the Samsung Galaxy J7
Contributors
neel0210, Astrako, DAvinash97
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: latest BL
Version Information
Status: Stable
Current Stable Version: v2
Stable Release Date: 2020-09-18
Created 2020-09-18
Last Updated 2020-09-18

Reserved

Great Rom Appreciate your Hard Work
neel0210 said:
SOME INFORMATION YOU SHOULD KNOW​
Galaxy M10 Q SYSTEM Port
If u want to Report Any Bug Mention me with Proper Logs
I am not responsible for bricked devices, dead SD card
Please do some research if you have any concerns about features included in this ROM before flashing it!
Any Sort of Kanging Would Reported Without Hesitation
FEATURES​
Deknoxed
AROMA INSTALLATION
Bloatfree
Ram tweaks
RMM - removed
Dolby support
Latest Camera Features
BLF
Samsung Facial recognition
Other misc changes
MORE FEATURES​
All the original features are present (Wifi,etc)
Camera Watermark
rootable with magisk
Heavly optimised for variants
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
VoLTE Support for INS users and countries that use it
More features via separate AROMA flashable
INSTALLATION​
strongly recommended to use Orangefox recovery by @Astrako
SYSTEM IS PART OF TREBLE so first you need to flash Create vendor from SPAGET (only if you don't have VENDOR partition)
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK all together)
Flash the ROM.ZIP
AFTER FLASHING ROM.ZIP FLASH PRISH VENDOR V2 ( SINCE ITS ONLY SYSTEM PORT )
Reboot and enjoy and remember first boot will take time.
SCREENSHOTS​
Imgur Album with ALL photos : SCREENSHOTS​
CREDITS​IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@Astrako for giving us the reason to public the roms by fixing bugs like camera and bluetooth, huge respect man without you there is no twoui in 7870
@Davinash97 for sharing is exception knowledge with me and bearing my spam
@saifur for logos and general help
@DEAN for HELPING THE MOST THROUGHOUT THE WORK
@Xgbcx for HELPING THE MOST THROUGHOUT THE WORK
And few more that didn't give me their usernames.
if i forgot to mention someone or lack of proper credits PM me on telegram by searching @neel0210
CHANGELOG​V1.0
-initial release
- BASED on m10 Q FW
- Added support for A3 thnx to @Astrako
- Added Root support with Magisk
- Encryption removed
- Added New Camera mods
- NOW CAN ZOOM IN NIGHT MDOE
- MAX ISO IS 1600 NOW
- SHAPE SELFIE SUPPORT
- LONG EXPOSURE RESOLUTION CHANGED
- HEVC UPDATED
- MUCH MORE WHICH IDK IDC
- Added New Bootamination (SAMSUNG OREO ONE)
- Added some system optimizations
- Dolby support
- Much more idk
- Added GAMING TWEAKS!
- Added TWEAKS FOR RAM MANAGMENT!
- Samsung face Recognition
- HEAVILY DEBLOATED!
- Update Latest Apps!
DOWNLOAD​
PRISH OS M10 Q PORT V2
Download : Drive
SUPPORTED DEVICES​
-J701X
-J710X
-G610X
-J730X
-J530X
-J600X
-A320X
BUGS​-: NO one is saying this rom is totally bugless but it is so far stable for daily usage
-: if you find any bugs report in out telegram support group
-: So far we got that ROM has issue of Clock not showing on lockscreen i have shared the fix in my fix folder which is able in my support group so join it and do : /fix_folder you will have links there
Note : First of all special thnx to @Astrako for bringing and helping in Twoui to make it stable by fixing bugs like camera, bluetooth, idea on Green artifacts and so on, so First many thanks to him and one more imp thing if you're using any kind of fixes from my rom, please do not.
NO ONE is allowed to use a single file from my rom, and if i found any of them from my rom, threads will be reported instantly.
If you find any bugs and wanna report them, visit our TELEGRAM GROUPS
TELEGRAM GROUPS​
CHANNEL | DISCUSSION​
DONATIONS​I dont want coffee or anything to wake me up while fulfilling my android addiction your simple one thank in post is enough to make my day, but if you really want to donate then do charity or to the people who suffering in this COVID-19 pandemic.
XDA:DevDB Information
PRISH OS M10 PORT V2, ROM for the Samsung Galaxy J7
Contributors
neel0210, Astrako, DAvinash97
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: latest BL
Version Information
Status: Stable
Current Stable Version: v2
Stable Release Date: 2020-09-18
Created 2020-09-18
Last Updated 2020-09-18
Click to expand...
Click to collapse
Best Rom Ever i used this Rom For a Month and still this Rom is Smooth Af you must try out this rom
Thanks For Great Roms .

Hi. I wanted to try it on my A3 2017 device. I did the instructions given. Installed successfully. However, I had to return to my old port after staying in the Samsung logo for more than half an hour. Help me!
SM-A750FN cihazımdan Tapatalk kullanılarak gönderildi

Hi, works in SM G611 MT? J7 prime 2 have not anything especifically for It self

Model 610mx, no boot, boot directly in download mode

work whatsapp video call?

facuu.delvaa said:
work whatsapp video call?
Click to expand...
Click to collapse
In my case... it doesn´t work.

RODRI2688 said:
Model 610mx, no boot, boot directly in download mode
Click to expand...
Click to collapse
means you didn't flash rom file first.

Arbustito said:
In my case... it doesn´t work.
Click to expand...
Click to collapse
please let me know link where to download the rom file zip. or let me know for any gsi for G610F

Why entering into downloading mode after installation of rom please help.

arunkumar8888 said:
Why entering into downloading mode after installation of rom please help.
Click to expand...
Click to collapse
Even I have faced the same thing. Rom description mentioned install system image first and then this zip. Flashing only this zip going to download mode. SO I have asked developer where can I get the rom.zip?

[ROM][10][ONEUI 2] PRISH OS Wide3 PORT V1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOME INFORMATION YOU SHOULD KNOW​
Galaxy wide3 Q SYSTEM Port
If u want to Report Any Bug Mention me with Proper Logs
I am not responsible for bricked devices, dead SD card
Please do some research if you have any concerns about features included in this ROM before flashing it!
Any Sort of Kanging Would Reported Without Hesitation
FEATURES​
Deknoxed
AROMA INSTALLATION
Bloatfree
Ram tweaks
RMM - removed
Dolby support
Latest Camera Features
BLF
Samsung Facial recognition
Other misc changes
MORE FEATURES​
All the original features are present (Wifi,etc)
Camera Watermark
rootable with magisk
Heavly optimised for variants
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
VoLTE Support for INS users and countries that use it
More features via separate AROMA flashable
INSTALLATION​
strongly recommended to use Orangefox recovery by @Astrako
SYSTEM IS PART OF TREBLE so first you need to flash Create vendor from SPAGET (only if you don't have VENDOR partition)
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK all together)
Flash the ROM.ZIP
AFTER FLASHING ROM.ZIP FLASH PRISH VENDOR V2 ( SINCE ITS ONLY SYSTEM PORT )
Reboot and enjoy and remember first boot will take time.
SCREENSHOTS​
Imgur Album with ALL photos : SCREENSHOTS​
CREDITS​IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@Astrako for giving us the reason to public the roms by fixing bugs like camera and bluetooth, huge respect man without you there is no twoui in 7870
@Davinash97 for sharing is exception knowledge with me and bearing my spam
@saifur for logos and general help
@DEAN for HELPING THE MOST THROUGHOUT THE WORK
@Xgbcx for HELPING THE MOST THROUGHOUT THE WORK
And few more that didn't give me their usernames.
if i forgot to mention someone or lack of proper credits PM me on telegram by searching @neel0210
CHANGELOG​V1.0
-initial release
- BASED on Wide3 Q FW
- Added support for A3 thnx to @Astrako
- Added Root support with Magisk
- Encryption removed
- Added New Camera mods
- NOW CAN ZOOM IN NIGHT MDOE
- MAX ISO IS 1600 NOW
- SHAPE SELFIE SUPPORT
- LONG EXPOSURE RESOLUTION CHANGED
- HEVC UPDATED
- MUCH MORE WHICH IDK IDC
- Added New Bootamination (SAMSUNG OREO ONE)
- Added some system optimizations
- Dolby support
- Much more idk
- Added GAMING TWEAKS!
- Added TWEAKS FOR RAM MANAGMENT!
- Samsung face Recognition
- HEAVILY DEBLOATED!
- Update Latest Apps!
DOWNLOAD​
PRISH OS Wide3 Q PORT V1
Download : AFH
MD5 : 2287f18e71562ec243de9dbcd96ab0a3
SUPPORTED DEVICES​
-J701X
-J710X
-G610X
-J730X
-J530X
-J600X
-A320X
BUGS​-: NO one is saying this rom is totally bugless but it is so far stable for daily usage
-: if you find any bugs report in out telegram support group
-: So far we got that ROM has issue of Clock not showing on lockscreen i have shared the fix in my fix folder which is able in my support group so join it and do : /fix_folder you will have links there
Note : First of all special thnx to @Astrako for bringing and helping in Twoui to make it stable by fixing bugs like camera, bluetooth, idea on Green artifacts and so on, so First many thanks to him and one more imp thing if you're using any kind of fixes from my rom, please do not.
NO ONE is allowed to use a single file from my rom, and if i found any of them from my rom, threads will be reported instantly.
If you find any bugs and wanna report them, visit our TELEGRAM GROUPS
TELEGRAM GROUPS​
CHANNEL | DISCUSSION​
DONATIONS​I dont want coffee or anything to wake me up while fulfilling my android addiction your simple one thank in post is enough to make my day, but if you really want to donate then do charity or to the people who suffering in this COVID-19 pandemic.
XDA:DevDB Information
PRISH OS Wide3 PORT V1, ROM for the Samsung Galaxy J7
Contributors
neel0210, Astrako, DAvinash97
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: latest BL
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2020-09-18
Created 2020-09-18
Last Updated 2020-09-18

PRISH OS wide3 V2.0 (10/09/2020)
V2.0
- BASED on Wide3 Q FW
- Added support for A3 thnx to @Astrako
- Added Root support with Magisk
-Fixed Wallpaper app lag
-Fixed Lockscreen Clock bug
-Added SmartCapture
-Added Galaxy Store
- Encryption removed
- Added New Camera mods
- NOW CAN ZOOM IN NIGHT MDOE
- MAX ISO IS 1600 NOW
- SHAPE SELFIE SUPPORT
- LONG EXPOSURE RESOLUTION CHANGED
- HEVC UPDATED
- MUCH MORE WHICH IDK IDC
- Added New Bootamination (SAMSUNG OREO ONE)
- Added some system optimizations
- Dolby support
- Much more idk
- Added GAMING TWEAKS!
- Added TWEAKS FOR RAM MANAGMENT!
- Samsung face Recognition
- HEAVILY DEBLOATED!
- Update Latest Apps!
ROM download
PRISH OS Wide3 PORT V2 : Drive
All credits goes to @Xgbcx for doing all the work alone, you're awesome Bruh!
if you like our work do thnx on thread at least !
kthnxbye

Best Rom And Stable
neel0210 said:
SOME INFORMATION YOU SHOULD KNOW​
Galaxy wide3 Q SYSTEM Port
If u want to Report Any Bug Mention me with Proper Logs
I am not responsible for bricked devices, dead SD card
Please do some research if you have any concerns about features included in this ROM before flashing it!
Any Sort of Kanging Would Reported Without Hesitation
FEATURES​
Deknoxed
AROMA INSTALLATION
Bloatfree
Ram tweaks
RMM - removed
Dolby support
Latest Camera Features
BLF
Samsung Facial recognition
Other misc changes
MORE FEATURES​
All the original features are present (Wifi,etc)
Camera Watermark
rootable with magisk
Heavly optimised for variants
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
VoLTE Support for INS users and countries that use it
More features via separate AROMA flashable
INSTALLATION​
strongly recommended to use Orangefox recovery by @Astrako
SYSTEM IS PART OF TREBLE so first you need to flash Create vendor from SPAGET (only if you don't have VENDOR partition)
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK all together)
Flash the ROM.ZIP
AFTER FLASHING ROM.ZIP FLASH PRISH VENDOR V2 ( SINCE ITS ONLY SYSTEM PORT )
Reboot and enjoy and remember first boot will take time.
SCREENSHOTS​
Imgur Album with ALL photos : SCREENSHOTS​
CREDITS​IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@Astrako for giving us the reason to public the roms by fixing bugs like camera and bluetooth, huge respect man without you there is no twoui in 7870
@Davinash97 for sharing is exception knowledge with me and bearing my spam
@saifur for logos and general help
@DEAN for HELPING THE MOST THROUGHOUT THE WORK
@Xgbcx for HELPING THE MOST THROUGHOUT THE WORK
And few more that didn't give me their usernames.
if i forgot to mention someone or lack of proper credits PM me on telegram by searching @neel0210
CHANGELOG​V1.0
-initial release
- BASED on Wide3 Q FW
- Added support for A3 thnx to @Astrako
- Added Root support with Magisk
- Encryption removed
- Added New Camera mods
- NOW CAN ZOOM IN NIGHT MDOE
- MAX ISO IS 1600 NOW
- SHAPE SELFIE SUPPORT
- LONG EXPOSURE RESOLUTION CHANGED
- HEVC UPDATED
- MUCH MORE WHICH IDK IDC
- Added New Bootamination (SAMSUNG OREO ONE)
- Added some system optimizations
- Dolby support
- Much more idk
- Added GAMING TWEAKS!
- Added TWEAKS FOR RAM MANAGMENT!
- Samsung face Recognition
- HEAVILY DEBLOATED!
- Update Latest Apps!
DOWNLOAD​
PRISH OS Wide3 Q PORT V1
Download : Drive
SUPPORTED DEVICES​
-J701X
-J710X
-G610X
-J730X
-J530X
-J600X
-A320X
BUGS​-: NO one is saying this rom is totally bugless but it is so far stable for daily usage
-: if you find any bugs report in out telegram support group
-: So far we got that ROM has issue of Clock not showing on lockscreen i have shared the fix in my fix folder which is able in my support group so join it and do : /fix_folder you will have links there
Note : First of all special thnx to @Astrako for bringing and helping in Twoui to make it stable by fixing bugs like camera, bluetooth, idea on Green artifacts and so on, so First many thanks to him and one more imp thing if you're using any kind of fixes from my rom, please do not.
NO ONE is allowed to use a single file from my rom, and if i found any of them from my rom, threads will be reported instantly.
If you find any bugs and wanna report them, visit our TELEGRAM GROUPS
TELEGRAM GROUPS​
CHANNEL | DISCUSSION​
DONATIONS​I dont want coffee or anything to wake me up while fulfilling my android addiction your simple one thank in post is enough to make my day, but if you really want to donate then do charity or to the people who suffering in this COVID-19 pandemic.
XDA:DevDB Information
PRISH OS Wide3 PORT V1, ROM for the Samsung Galaxy J7
Contributors
neel0210, Astrako, DAvinash97
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: latest BL
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2020-09-18
Created 2020-09-18
Last Updated 2020-09-18
Click to expand...
Click to collapse
This Rom is Pretty Awesome and Recommended for Gaming And Daily Usage

I can't download Prish Vendor v2.
"File link unavailable" error message in Mega apps.
Is it ok to flash all the file you mention without Prish Vendor v2 only ?

Great work as usual @neel0210, you are unstoppable and now also including @Xgbcx. Nice to see this team mate work!

It does not work for me, I followed everything to the letter, wipes, rom, vendor v2, reboot, and it remains for more than 10 minutes in the samsung logo. A320. Does anyone know where I can be failing? I come from rom port n20

davidmu88 said:
It does not work for me, I followed everything to the letter, wipes, rom, vendor v2, reboot, and it remains for more than 10 minutes in the samsung logo. A320. Does anyone know where I can be failing? I come from rom port n20
Click to expand...
Click to collapse
Do a force reboot

pwazoski said:
Do a force reboot
Click to expand...
Click to collapse
and after 20 minutes, if I force a restart, but in the same way it does not start, stuck in the sw samsung logo

Model 610mx >>boot perfectly, on the first try, brightness problem when lowering, the screen is black, in battery information it is still 3000mAh and the model is 3300mAh, in the google meet app, the camera does not work, on facebook it works externally sharing and whatsapp without problems, the main camera and secondary, no errors, front flash ok. Great job next level approved