Database Develop

Gear 2 / Gear 2 Neo Cradle

Samsung should release a nice dock stand for these watches. I hated the Galaxy Gear 'photo frame' cradle. I am not very keen on the new 'snap on' cradle for the Gear 2 and Gear 2 Neo.
I do not mind either cradle for occasional data transfer/connection, but for daily charging, why can't they sell the charging cradle they give to retailers to display the watches..
It sits on the counter, you take the watch off and just sit it into the cradle. There is a small magnet inside that pulls your watch into place and keeps it firmly connected to the two charging pins. It's already been designed and manufactured, now just make them in both white and black and offer them for sale. I'll take two.
---

Another angle of the retail cradle.

Give it some time
Sent from my SM-G900W8 using Tapatalk

Anyone tried to build their own?
The default charger cradle is shockingly cheap and tacky and within months wears down to the point that it doesn't click on
If its not covered under my warranty just going to attempt to make something out of it

I just received the Gear 2 Neo as an early Christmas present last night I would certainly like to have a charging stand.

[Review] Aerios Moduul Smartwatch Dock (LG G Watch R)

Aerios makes the best Smartwatch Docks, IMHO. I ordered it and the package arrived today. Just a few days after ordering. I'm in the USA and they are in Australia. It was shipped FedEx Express. Keep in mind, the amount shown on the web site is Australian Dollars, not US Dollars. So do the conversion, and the dock + shipping probably costs far less for most of you. Don't let the displayed price give you sticker shock .
The dock comes in a nice box, with an additional 3 foot charge cable. Either the supplied cable or another can be used. The hole in the dock for a microUSB is big enough for any I have ever seen. But the supplied one fits the most snug and fills the full whole. In the photos, I'm using a Blackberry MicroUSB charger.
Far as types they offer. Although they have Black with Walnut and Silver with Oak, the Silver with Oak is the only one in stock today.
The bottom of the dock, has a pad with a plastic cover. If you remove the plastic, there is sticky stuff on the bottom, in case you want to hold the dock in place on a desk. You have to supply your own round charger dock, to insert in the wooden circular cut out, and you need your own USB power plug to use with the cable.
I've attached many pictures, which I hope tell the story best.
I'll be happy to answer any questions.

I also received mine yesterday, really a quality product! The only issue I have is that my leather (closed) watch strap is a little too stiff and a too heavy: it "pushes" the watch a little away from the pins ... so I guess I have to manually modify the stand (top and bottom chamfered) in order to keep my watch connected. Do you also experience that problem?

Troxelke said:
I also received mine yesterday, really a quality product! The only issue I have is that my leather (closed) watch strap is a little too stiff and a too heavy: it "pushes" the watch a little away from the pins ... so I guess I have to manually modify the stand (top and bottom chamfered) in order to keep my watch connected. Do you also experience that problem?
Click to expand...
Click to collapse
See the strap in the photos showing my watch. I replaced the strap.
I've never been a real "fan" of LG's pin charger dock. I've had issues positioning things right, even on a flat surface. It takes a moment to position things "just right" in the Aerios dock, but it looks so sweet once in place. I don't blame Aerios, since I had issues with positioning before getting their dock. My strap does not cause the watch to fall off though. The stock leather strap is a bit heavier. Just make sure you position things well. I would not buy a new strap just to test if it works better if I were you.

I just got Wear Charging Widget and it looks really nice on the dock. Also, here's a related article about the widget. It is the only thing I've found that keeps the watch showing anything the entire time it is charging.

Darnell_Chat_TN said:
I just got Wear Charging Widget and it looks really nice on the dock. Also, here's a related article about the widget. It is the only thing I've found that keeps the watch showing anything the entire time it is charging.
Click to expand...
Click to collapse
Just got my silver version in. Ordered earlier this week and just got it today. FAST from AUS to TX, USA!! I think the shipping alone cost a good penny lol. For my take....the stand is very very well done. I also picked up the shapeways one last month. And to compare, this one is much more polished but because I use a lot of third party watch bands on my LG G Watch, the current band kind of pushes the lg dock charger out a bit. Whereas the one I have at home has a deeper cavity to house the lg charger and the angle on this is a tad too vertical. I need to grab some double sided tape to hold into place.
I have my Brembo stick that works a bit better for $20 bux lol. But doesn't look as good lol. Do I like it? Yes, would I recommend it? for $60 bux shipped, I want to say...I'm on the border on this. If you like the look of it, then go for it. I am ok with it. It somewhat matches my desk a bit at work. But I would recommend the Shapeways one for sure. I use that every night without issue.

Tylt Vu Wireless Charging Stand

I wanted to share an interesting observation I made this evening. I have the S6 Edge with the Tylt Vu stand, and it works a heck of a lot better if I put the phone down into it in landscape.
Portrait has a REAL hard time getting a connection. Of course, if I take the case off, it doesn't matter. For now, I don't mind because I can see the night clock better.
UPDATE: Portrait will not work regardless of case vs none. If you are able to get it to get a connection, it cannot maintain it. As stated in post #7, I believe there is an alignment issue with the coils and the phone. I will be emailing Tylt to see what they have to say.

No pics = fail

I was gonna buy a Tylt, but the price was ridiculous, so I ordered one of these, shold be here tomorrow...less than 1/2 the price!
http://www.ebay.com/itm/201195843383?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

wase4711 said:
I was gonna buy a Tylt, but the price was ridiculous, so I ordered one of these, shold be here tomorrow...less than 1/2 the price!
http://www.ebay.com/itm/201195843383?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Maybe less than half in price, but less than half the charging voltage 5v versus 12v of the Tylt

dhonzik said:
Maybe less than half in price, but less than half the charging voltage 5v versus 12v of the Tylt
Click to expand...
Click to collapse
they both put out 1 amp while charging, so there wont be much, if any difference in how long it takes them to charge a phone, especially if they are sitting on the charging stand for awhile, But hey, if it makes you feel better about overpaying by more than double, that's ok..

dk206 said:
No pics = fail
Click to expand...
Click to collapse
I'm not sure why pics are needed? To update, I realized that case, or no case, it's not going to work in portrait orientation. It does get a connection but cannot maintain it. I've updated my OP to reflect that.
Also, there is now at least one review of similar products on Amazon having the same issue. Some of the vendors are even updating their item descriptions saying not to use with the S6/Edge

dhonzik said:
Maybe less than half in price, but less than half the charging voltage 5v versus 12v of the Tylt
Click to expand...
Click to collapse
While that is true, if you're just using it as a charger overnight then it shouldn't be much of an issue. The 3 coil could benefit there as well, as my suspicion is an alignment issue with the S6 and the Tylt, and other products based on its design.

wase4711 said:
I was gonna buy a Tylt, but the price was ridiculous, so I ordered one of these, shold be here tomorrow...less than 1/2 the price!
http://www.ebay.com/itm/201195843383?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Let me know how well it works, with and without a case if possible.

I have 2 tylt Vu wireless chargers and my 6 edge works fine in portrait with both. Maybe it's just your unit ??? Btw i also have the neo hybrid case on while wireless charging .

I can definitely agree with OP. I have two tylt vu chargers, tried it with both case and no case on the edge, and the chargers both exhibit weird behaviors when the phone is in portrait. The behaviors include:
Charger showing green light but phone does not show charging
S6 edge continuously disconnect and reconnects back to the wireless charging
No light and not charging on the S6 edge
I think the position of the wireless charging receiver on the edge must be in between the top and middle coils and is not getting a solid connection. It would also explain why having it landscape will give you a proper connection if it is able to solidly make a connection with bottom coil.
UPDATE: I did some testing with the charger I have at home and it seems that the case might be the real culprit. I cannot seem to replicate the weird behaviors when there is no case on the phone; it chargers just fine. I did take a video that shows the odd behavior when the S6 edge has a neo-hybrid case on, this one. youtube link

I have two Tylt chargers and my S6 Edge works great in portrait. I was lucky and got two Tylt chargers on clearance $30 each from T-Mobile a year ago. Have no issues charging with my clear plastic T-Mobile case. It's very thin though.
My Note 4 had issues wireless charging at times I would have to take it off then set it back down. I had the Samsung Qi back cover.

hippocritical16 said:
I can definitely agree with OP. I have two tylt vu chargers, tried it with both case and no case on the edge, and the chargers both exhibit weird behaviors when the phone is in portrait. The behaviors include:
Charger showing green light but phone does not show charging
S6 edge continuously disconnect and reconnects back to the wireless charging
No light and not charging on the S6 edge
I think the position of the wireless charging receiver on the edge must be in between the top and middle coils and is not getting a solid connection. It would also explain why having it landscape will give you a proper connection if it is able to solidly make a connection with bottom coil.
UPDATE: I did some testing with the charger I have at home and it seems that the case might be the real culprit. I cannot seem to replicate the weird behaviors when there is no case on the phone; it chargers just fine. I did take a video that shows the odd behavior when the S6 edge has a neo-hybrid case on, this one. youtube link
Click to expand...
Click to collapse
I have this case http://www.amazon.com/gp/product/B00SV63WVE/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Probably not the absolute thinnest case but it can't be too far off. If the charger cannot work properly even with a case as thin as this, then that, to me, is an issue. The fact that the "knockoff" versions of this product are starting to see reviews with similar issues should be considered. What I don't know is if the reviewer tested like you did...
Review: http://www.amazon.com/review/R30U94...etail-glance&nodeID=2335752011&store=wireless

Another vote for having two Tylt Vu's (apparently I'm not the only one who can't have just one!), and they both work fine without a case.... that being said, I ordered the Spigen Neo Hybrid CC in gunmetal as my first case I've ever had on any Galaxy device, EVER - this phone is just too damn expensive and thin not to have one this time - and I'll let you know in two days if it still works with that case on it!

S6e + Tylt + Spigen Neo Hybrid = No Bueno
I concur with OP. 5 tylt chargers around the house and my S6e with Spigen Neo Hybrid exhibits inconsistent wireless charging on portrait but no problem in landscape mode. Naked S6e charges with no problems in portrait.

This is my case that I have no issues wirless charging on my Tylt in portrait. The case is made by Samsung and I bought it at T-Mobile at cost $20 instead of $35. Limited protection but does cover the corners. S6 Edge is to damn sexy to hide in a case. I know it's better safe then sorry. Also if you register your phone at Samaung you can get 30% off and buy it from them.
http://www.t-mobile.com/accessories/samsung-galaxy-s-6-edge-protective-cover-clear-silver.html

That pretty unfortunate.
I happened to order this wireless charger/stand http://www.amazon.com/dp/B00S7IBDGW/ref=cm_sw_r_tw_dp_y-5jvb18R9X7M and charging in Portrait with a case/without a case works perfectly.

Galactic2 said:
That pretty unfortunate.
I happened to order this wireless charger/stand http://www.amazon.com/dp/B00S7IBDGW/ref=cm_sw_r_tw_dp_y-5jvb18R9X7M and charging in Portrait with a case/without a case works perfectly.
Click to expand...
Click to collapse
That's interesting because that's the same unit that the one review I saw they had problems. Also, I don't know how new this is or when you bought it, but it says in the item description that this is not for the S6 or S6 Edge, and that there will be a new version that is compatible.
The reviewer doesn't say whether it's the S6 or S6 Edge, however I am seeing on other branded products, the item descriptions are being updated with a warning not to buy for the S6.
I can't make heads or tails of it. I have other receivers that work just fine. Those include a Choetech Stadium, MobilePal battery pack with Qi charging, a Koolpad, and iOttie EasyFlex Wireless Charging Car Dock...

As an update to my comment about my S6E working just fine in the Tylt Vu, it still does, but damn that thing took over 6 hours to charge last night and when I picked it up this morning, it was MUCH hotter than my S5 ever was on the Tylt Vu with wireless charging cover..... I'll have to look how long it took my S5 to charge over night, I got my S6E down to around 15% and charged it from there - and then this morning when I was waking up, it made a charging connection sound, so I went to look at it to see if it had the same issues a few of you had, expecting to get up and see it half-dead, and it was at 100%.... so it was charging all night, no disconnections, just took a loooooooong time and made a looooooot of heat, which can't be good for it!

diehardbattery said:
That's interesting because that's the same unit that the one review I saw they had problems. Also, I don't know how new this is or when you bought it, but it says in the item description that this is not for the S6 or S6 Edge, and that there will be a new version that is compatible.
The reviewer doesn't say whether it's the S6 or S6 Edge, however I am seeing on other branded products, the item descriptions are being updated with a warning not to buy for the S6.
I can't make heads or tails of it. I have other receivers that work just fine. Those include a Choetech Stadium, MobilePal battery pack with Qi charging, a Koolpad, and iOttie EasyFlex Wireless Charging Car Dock...
Click to expand...
Click to collapse
Interesting I didn't even see that in the description before i bought it. But i can confirm this version works just fine with my Edge . And for the time being I am using the Spigen Air Cushion hybrid case and it still charges. It is a Qi enabled charger, I don't see why it would not be for a Qi device such as S6/Edge.

Galactic2 said:
Interesting I didn't even see that in the description before i bought it. But i can confirm this version works just fine with my Edge . And for the time being I am using the Spigen Air Cushion hybrid case and it still charges. It is a Qi enabled charger, I don't see why it would not be for a Qi device such as S6/Edge.
Click to expand...
Click to collapse
The issue is alignment between the coil(s) and the receiver. Are you carefully about how you put your phone onto it.or do you just kind.of drop it in there without giving it any thought?

cheap wireless charging stand that works!!

Just got this bad boy, and tested it out with cases and without..
without cases, works perfectly, portrait and Landscape;
with the spigen clear hybrid case on, works perfectly in portrait and landscape
with 3 different Verus cases on, it sometimes will work, depending on how you place it, in portrait, but worked perfectly in landscape!!!
Save a ton of $$$, and get it here..
http://www.ebay.com/itm/201195843383?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

this wallet dont work
this wallet doesnt work on pc

runforpc said:
this wallet doesnt work on pc
Click to expand...
Click to collapse
huh?

This isn't a stand but it work with a case. Plus it 3 coil so no placement adjustment needed.
CHOE Stadium Qi Wireless Charger 3-Coils Wide Charging Area Wireles... http://www.amazon.com/dp/B00JA7HNZO/ref=cm_sw_r_udp_awd_whmkvb0QKB2M9

nappent said:
This isn't a stand but it work with a case. Plus it 3 coil so no placement adjustment needed.
CHOE Stadium Qi Wireless Charger 3-Coils Wide Charging Area Wireles... http://www.amazon.com/dp/B00JA7HNZO/ref=cm_sw_r_udp_awd_whmkvb0QKB2M9
Click to expand...
Click to collapse
that one looks nice too; I just wanted one that I could use as a stand, and see the display on my desk..

The LG G3 wireless charging stand works fine but had to place the S6E upside down to align the wireless charger
Edit - thought it was working but didn't. Will investigate further

Do you notice any heating issues? I bought one of those ebay wireless chargers for my Nexus 5 and I stopped using after noticing that the phone would heat up every time I charged it using the wireless charger.

sm_x said:
Do you notice any heating issues? I bought one of those ebay wireless chargers for my Nexus 5 and I stopped using after noticing that the phone would heat up every time I charged it using the wireless charger.
Click to expand...
Click to collapse
nope, it gets slightly warm, which happens with all wireless chargers, and this is a metal/glass phone, but no "issues"

Does anyone know if the Nokia lumia stand works with the edge with a case? I have a spare one in the draw but unfortunately, no phone yet.
This one
http://www.amazon.co.uk/Nokia-Universal-Wireless-Charging-Compatible-Black/dp/B009WKGQL6
Sent from my Passport using Tapatalk

I've heard this A6 is good and half the price of a Tylt chargers. I was lucky I got two Tylt chargers on clearance a year ago. I wish I bought 3.

yep, my ebay 20 dollar cheapo works great with cases or without..
the only "weird" thing, is when there is a thicker case on, you have to first place it in landscape mode, then about 5 second later, you see it say "charging wirelessly"; then, if you want, you can turn it back to portrait and it will charge normally..
either way, it works great, so I was glad to save a lot of $$$, and have a desk stand wireless charger!

Yes,it's support fine on charging, great indeed! Also a little sorry for the overheat...

Wireless charging, yup it helped me in a number of ways, above all the availability of charging facility is now available everywhere that makes me very comfortable to keep my phone, ipad and other items alive all the time.

I had a few of the CHOE Qi Wireless chargers from when I bought them for my Note 3. Instead of buying new accessories on top of an already expensive ass purchase with the phone. I decided to 3D print my own charging stand (I have 10 3D printers at work ). This is my first prototype. Still exploring different ways to tweak the stand so it'll work in both portrait and landscape. Currently it only charges in landscape mode.
Wireless charger: http://www.amazon.com/UPGRADED-Wire...&sr=1-2&keywords=CHOETECH+Qi+Wireless+Charger
I can provide my STL file if anyone has access to a 3D printer.

uktivo said:
Does anyone know if the Nokia lumia stand works with the edge with a case? I have a spare one in the draw but unfortunately, no phone yet.
This one
http://www.amazon.co.uk/Nokia-Universal-Wireless-Charging-Compatible-Black/dp/B009WKGQL6
Sent from my Passport using Tapatalk
Click to expand...
Click to collapse
simple answer , no.
It does but you have to put it sideway and wedge something under it. so not worth the hassle

is there any heating issues

[/COLOR]
nappent said:
This isn't a stand but it work with a case. Plus it 3 coil so no placement adjustment needed.
CHOE Stadium Qi Wireless Charger 3-Coils Wide Charging Area Wireles... http://www.amazon.com/dp/B00JA7HNZO/ref=cm_sw_r_udp_awd_whmkvb0QKB2M9
Click to expand...
Click to collapse
They have standing wireless charger now as i recently bought one from them. The charger has 3 coils inside on the iron stand.
---------- Post added at 07:25 AM ---------- Previous post was at 06:57 AM ----------
Mouahmong said:
I had a few of the CHOE Qi Wireless chargers from when I bought them for my Note 3. Instead of buying new accessories on top of an already expensive ass purchase with the phone. I decided to 3D print my own charging stand (I have 10 3D printers at work ). This is my first prototype. Still exploring different ways to tweak the stand so it'll work in both portrait and landscape. Currently it only charges in landscape mode.
Wireless charger: http://www.amazon.com/UPGRADED-Wire...&sr=1-2&keywords=CHOETECH+Qi+Wireless+Charger
I can provide my STL file if anyone has access to a 3D printer.
Click to expand...
Click to collapse
Appreciate it but they already released a standing one recently that I am currently using to charger my S6 Edge lying on my office table!

Does the Gear Live still do the job?

Hi all
Because of the price point ($150 CDN), the gear live is one of my finalists for a smartwatch.
My question is, obviously, is the device still a good purchase in 2016?
Why or why not?
Thanks!

I would say yes I got the watch for christmas from my wife and have been using it every day since, lasts me all day with a few texts here and there, connects to my bluetooth headset, plays music independantly of phone, plenty of watchfaces on android market and can make your own with watchmaker app. Heart rate monitor is pretty consistent, screen res is nice and always on with dimmed mode. All in all a nice looking functional watch

yep mine still works awesome. I think google said that all android wear watches will get marshmallow update so it atleast good for another year. The always on display is a big feature.

I would say no....
I recently bought the Samsung Gear Live (new for $80) and also a new LG Urbane and I think I would have skipped the SGL if I had to do it over.
They are both running the same code and quite frankly, the SGL is a bit flaky compared to the LG.

ekaiser57 said:
Hi all
Because of the price point ($150 CDN), the gear live is one of my finalists for a smartwatch.
My question is, obviously, is the device still a good purchase in 2016?
Why or why not?
Thanks!
Click to expand...
Click to collapse
I would avoid the Samsung Gear Live at any price over $80 USD.
I purchased a SGL in November 2014. I wore it all day every day until December 2015 when I picked up a Huawei Watch.
Samsung Gear Live:
Pros:
AMOLED Display
Heart Rate Sensor
Comfortable Ergonomic feel when worn
Acceptable battery life (I keep tilt to wake, always on display, and Wifi active)
IP67 Certification with silicone straps work well with an active lifestyle
Cons:
Display likely to pick up a few scratches over time. The outter bezel is not raised from the screen which makes the watch easier to interact with, but offers no protections against incidental contact. (I am very careful with electronics but my watches always seem to get nicked up. Unless you go with a Huawei watch with sapphire crystal this will likely be an issue on any android wear watch.)
Charger quality in question. The charger cradle clips on the back of the watch and secures tabs in the cradle into recesses on the sides of the watch. One of the tabs on my charger broke after around 6 months. I purchased a replacement from Samsung which is still holding up. I have even read cases of the recessed cavities on the watch breaking.
The plastic around where the watchbands connect has cracked and chipped off. The band is still held securely in the metal casing but I would think this will happen on all SGLs with time. This appears to affect the watches water resistance as it creates openings into the case.
The Lugs/connection place for the watch bands has a unique profile that in my opinion only looks nice with the watch band that comes with the watch. It will work with most 22mm watch bands but third party bands just don't look right to me.
The connection on the stock watch band is secured with two punch-through pins and can disconnect if the band gets caught on something like your belt or pocket.
The watch does not include an internal speaker and therefore will not support the speaker features in the Marshmallow Android Wear update.
Final Thoughts
I still wear my SGL when playing sports or working out but due to the build quality issues and look/style with custom watch bands I would not recommend it as a daily watch. I would suggest an Asus Zenwatch 2 in a similar price point as it includes an embedded speaker and has a more standard watch lug design that will allow you to use third party straps without compromising the look.
Once the Marshmallow Android Wear update is available you will definitely want a watch with an embedded speaker. I am so looking forward to being able to easily answer a call on my watch while either my phone is close but not accessible or my hands are not able to get to my phone. My most common examples wold be driving, cooking, and playing video games.
I have also accrued 5 new watch bands in addition to the one that came with my Huawei watch and I change them very frequently. I was not able to do this with the Gear Live as I hated the way after marked watch straps looked at the connection between the watch strap and the watch case.
If you still want a Gear Live I would suggest setting up an alert for it on Slickdeals and wait for a good deal to come along. It was available for $80 USD for a short time on 1/15/2016 on eBay.
Let me know if you have any more detailed questions about the SGL.