[SOLVED] New update installed and stuck in boot logo - ASUS ROG Phone 3 Questions & Answers

ROG phone 3 Strix Edition Global
Scenario:
1. 21-SEP-20 11:45 PM~ phone rebooted and download update auto prompted (done usual stuff for update by selecting to proceed)
2. 21-SEP-20 11:55 PM~ download and installation completed and system asked for reboot.
3. As of this writing (22-SEP-20 11:10 AM) still stuck at boot logo and can’t even shut it down
Anyone encountered the same scenario or has any idea on what to do to fix (except to Service Center)?

just update mine to the latest version that have the bypass charging in it and i dont encounter any problem at all....mine is CN ROM 256gb/12gb raml...working as intended good luck friends

johpiks said:
ROG phone 3 Strix Edition Global
Scenario:
1. 21-SEP-20 11:45 PM~ phone rebooted and download update auto prompted (done usual stuff for update by selecting to proceed)
2. 21-SEP-20 11:55 PM~ download and installation completed and system asked for reboot.
3. As of this writing (22-SEP-20 11:10 AM) still stuck at boot logo and can’t even shut it down
Anyone encountered the same scenario or has any idea on what to do to fix (except to Service Center)?
Click to expand...
Click to collapse
Hold volume button down and up and power button to force shutdown.
from off press volume button up and power on this well send you to Fastboot and press volume up to switch boot to recovery then press power button. then you can factory reset if you want.

ryu091 said:
Hold volume button down and up and power button to force shutdown.
from off press volume button up and power on this well send you to Fastboot and press volume up to switch boot to recovery then press power button. then you can factory reset if you want.
Click to expand...
Click to collapse
These solved the problem. Thank you ryu091!

Related

Help with TWRP Recovery Issue

Hopefully you all don't sigh or roll your eyes at my questions, I came from iOS 2 weeks ago and the Android learning curve is pretty damn steep!
Many guides I read says to enter recovery mode by turning the phone off, then holding volume down and power buttons until the screen flashes and you should enter right into recovery, especially guides to flash a rom. I installed TWRP last week and the way I enter it is hit restart with phone powered on and as the phone begins to restart hold volume down only, then I enter it.
When I hold power and volume down when the phone is shut off, I get the HTC boot image as the phone is rebooting and then a message saying something along the lines of the phone will reboot and it counts down 3,2,1 then the phone reboots a second time and not into recovery. Plus my wallpaper gets removed. I rebooted but the wallpaper was still removed.
Two questions; Is this some sort of faulty installation of my recovery? Which way should I boot into recovery when about to wipe and flash a rom? Thanks a million!
twrp quicker reboot...
AcerRacer said:
Hopefully you all don't sigh or roll your eyes at my questions, I came from iOS 2 weeks ago and the Android learning curve is pretty damn steep!
Many guides I read says to enter recovery mode by turning the phone off, then holding volume down and power buttons until the screen flashes and you should enter right into recovery, especially guides to flash a rom. I installed TWRP last week and the way I enter it is hit restart with phone powered on and as the phone begins to restart hold volume down only, then I enter it.
When I hold power and volume down when the phone is shut off, I get the HTC boot image as the phone is rebooting and then a message saying something along the lines of the phone will reboot and it counts down 3,2,1 then the phone reboots a second time and not into recovery. Plus my wallpaper gets removed. I rebooted but the wallpaper was still removed.
Two questions; Is this some sort of faulty installation of my recovery? Which way should I boot into recovery when about to wipe and flash a rom? Thanks a million!
Click to expand...
Click to collapse
way i do it is i unlock the screen hold power down to get the power options screen then i select reboot i wait for the screen to go blank then i hold the power and volume down it will load into bootloader then i just hit whatever boot loader has the recovery on it (twrp 2.5... had a problem wouldnt do system boot just take me back to recovery so i had to do to bootloader then restart from there) then you will hit recovery i would do a factory wipe but dont have it delete anything else just do a normal factory wipe and maybe delete cache and your problem should be fixed unless there is an issue with your rom you are using then if it bugs you that much find a different one.
another not when the system reboots i think you can just hit volume down dont have to hold power also but im so aggrivated with my current issue i just hold power also to make sure it goes thew.
AcerRacer said:
Hopefully you all don't sigh or roll your eyes at my questions, I came from iOS 2 weeks ago and the Android learning curve is pretty damn steep!
Many guides I read says to enter recovery mode by turning the phone off, then holding volume down and power buttons until the screen flashes and you should enter right into recovery, especially guides to flash a rom. I installed TWRP last week and the way I enter it is hit restart with phone powered on and as the phone begins to restart hold volume down only, then I enter it.
When I hold power and volume down when the phone is shut off, I get the HTC boot image as the phone is rebooting and then a message saying something along the lines of the phone will reboot and it counts down 3,2,1 then the phone reboots a second time and not into recovery. Plus my wallpaper gets removed. I rebooted but the wallpaper was still removed.
Two questions; Is this some sort of faulty installation of my recovery? Which way should I boot into recovery when about to wipe and flash a rom? Thanks a million!
Click to expand...
Click to collapse
*Update*
Ok so after trying again to enter bootloader from power off holding volume down and power button, the same thing happened where I got the 3 second countdown but I continued to hold the buttons and I correctly entered into bootloader. So my question then stands, when flashing a new rom does it matter which method I use? (Reboot, volume down or Power on, volume down/power)
Thanks
Sent from my HTC One using xda app-developers app

[Q] Cannot enter recovery mode of Moto G

Hi guys,
I just unlocked my phone and tried entering recovery mode, but it won't work, it just boots normal.
Pressing 3 sec VolDown + Power
Pressing VolDown, then VolUp.
Android Logo appears and after a few seconds phone boots just normal.
Tried it now a thousand times.
Any suggestions?
Moto G, Android 4.4.4, Kernel [email protected]#1, system version 210.12.40.falcon_umts.Retail.en.DE, BuildNo: KXB21.14-L1.40
Timjim01 said:
Hi guys,
I just unlocked my phone and tried entering recovery mode, but it won't work, it just boots normal.
Pressing 3 sec VolDown + Power
Pressing VolDown, then VolUp.
Android Logo appears and after a few seconds phone boots just normal.
Tried it now a thousand times.
Any suggestions?
Moto G, Android 4.4.4, Kernel [email protected]#1, system version 210.12.40.falcon_umts.Retail.en.DE, BuildNo: KXB21.14-L1.40
Click to expand...
Click to collapse
Shutdown your phone and after its completely down Press "Volume Down key +Power Key" for 5 Sec then release, As simple as that
lols21.10 said:
Shutdown your phone and after its completely down Press "Volume Down key +Power Key" for 5 Sec then release, As simple as that
Click to expand...
Click to collapse
That is not helpful at all. I know how to boot to boot menu. I cannot enter recovery mode!
Timjim01 said:
That is not helpful at all. I know how to boot to boot menu. I cannot enter recovery mode!
Click to expand...
Click to collapse
Ohhh srry flash stock recovery
I have a slightly different problem, I try to get into Recovery but in Recovery no options show up at all, all I see is the Android robot laying down with the '!' mark, with no options, sometimes it also says 'No command' with the Android.
Boot menu before you select Recovery works fine. (I'm completely stock)
jay2the1 said:
I have a slightly different problem, I try to get into Recovery but in Recovery no options show up at all, all I see is the Android robot laying down with the '!' mark, with no options, sometimes it also says 'No command' with the Android.
Boot menu before you select Recovery works fine. (I'm completely stock)
Click to expand...
Click to collapse
Similar issue here: I unloacked the bootloader, and can't enter recovery mode of the stock Motorola recovery. Recovery mode stops with same picture as described above, robot lying on it's back. Does Motorola prevent loading the stock recovery when the phone is unlocked? I did not try to enter recovery with locked phone by the way, so can't tell if stock recovery didn't work in the first place.
Hi
That's the correct behaviour. Press volume UP+power, release power then volume UP, that v then shows the menu in recovery
Sent from my XT1068 using XDA Free mobile app
Finally I found correct way to do that
To be clear I will start from beginning
1. Power off device
2. Press Volume DOWN + Power buttons for 3 to 5 sec then release Volume DOWN and then Power
3. Now select Recovery. Android with /!\ will be shown.
[Lollipop]
4. Press Power and while pressing it tap Volume Up
[KitKat]
4. Press Volume UP for 5 sec while pressing Volume UP press Power button.
(don't release Volume UP before pressing Power)
You are now in stock Recovery
bhavin192 said:
3. Now select Recovery. Android with /!\ will be shown.
Click to expand...
Click to collapse
Thanks, for the explanation! Only remaining odd thing: my device reboots to system OS instead of recovery when selecting recovery in the bootloader. I'm only able to go into recovery by:
Code:
fastboot boot recovery
I have the same exact problem where I could not go to recovery mode.
When in fastboot screen, I select Recovery by pressing volume up button and instead of phone going to recovery mode, my phone restarts to lands to lock screen.
When you say that you are able to go to recovery by -
Code:
fastboot boot recovery
What does it mean?
Which directory I have to be in to execute this command?
jheller said:
Thanks, for the explanation! Only remaining odd thing: my device reboots to system OS instead of recovery when selecting recovery in the bootloader. I'm only able to go into recovery by:
Code:
fastboot boot recovery
Click to expand...
Click to collapse
My moto g is having the same problem, let me try the method you mentioned down here
My moto g is having the same problem, let me try the method you mentioned down here.
It is really odd though that you have to follow steps which are not mentioned in fastboot mode to get to the recovery mode.
bhavin192 said:
Finally I found correct way to do that
To be clear I will start from beginning
1. Power off device
2. Press Volume DOWN + Power buttons for 3 to 5 sec then release Volume DOWN and then Power
3. Now select Recovery. Android with /!\ will be shown.
4. Press Volume UP for 5 sec while pressing Volume UP press Power button.
(don't release Volume UP before pressing Power)
You are now in stock Recovery
Click to expand...
Click to collapse
Timjim01 said:
Hi guys,
I just unlocked my phone and tried entering recovery mode, but it won't work, it just boots normal.
Pressing 3 sec VolDown + Power
Pressing VolDown, then VolUp.
Android Logo appears and after a few seconds phone boots just normal.
Tried it now a thousand times.
Any suggestions?
Moto G, Android 4.4.4, Kernel [email protected]#1, system version 210.12.40.falcon_umts.Retail.en.DE, BuildNo: KXB21.14-L1.40
Click to expand...
Click to collapse
Press volume up for 10 seconds and then just tap power button once and release both
My phone won't go past the android with ! in a triangle. I have tried pressing the up button for 15 secs and then the power button but nothing happens.
I have a Consumer Cellular XT1064 with unlocked bootloader which I flashed to retail Rom. Then I was able to go to stock recovery normally with pressing up 15sec and power, and manually flash the 5.0 OTA update. Now a few weeks later when I want to flash the second OTA update, I can't go into recovery.
Any help please.
Trekker56 said:
My phone won't go past the android with ! in a triangle. I have tried pressing the up button for 15 secs and then the power button but nothing happens.
I have a Consumer Cellular XT1064 with unlocked bootloader which I flashed to retail Rom. Then I was able to go to stock recovery normally with pressing up 15sec and power, and manually flash the 5.0 OTA update. Now a few weeks later when I want to flash the second OTA update, I can't go into recovery.
Any help please.
Click to expand...
Click to collapse
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/99808/p/30%2C6720%2C9151/reg/1229018/kw/cache%20partition try this
Stock img?
I've been having this issue too. Can someone post the recovery.img for the latest stock recovery? I want to try and flash it and see if I can get into recovery then.
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Hit thanks if this helped
Trekker56 said:
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Hit thanks if this helped
Click to expand...
Click to collapse
You are the man! Thank you(I also hit the thanks button).
Trekker56 said:
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Hit thanks if this helped
Click to expand...
Click to collapse
This key combination does not work for me
angelgzg said:
This key combination does not work for me
Click to expand...
Click to collapse
Try holding the volume up and tapping the power button at the /!\ Android screen
Trekker56 said:
The key combination to enter recovery at the distressed android screen has changed for Lollipop!
Hold the power button for a few secs and tap the up key!
Click to expand...
Click to collapse
Worked on the first attempt. This is the correct key combination in the Android 5.0 build.

Trying to hard reset my xt1068 kitkat phone, didn't show dead android guy at all.

My phone was frozen when I was taking a video,
then I forced restart the phone by pressing power button until it restarted.
However, my phone stuck at the android logo for a quite long time with the screen on, so I decided to do a factory reset.
I have tried the following steps on my friend's phone as we bought exactly same phone,
and succeded at first attempt.
1, volume down + power button goes into boot options.
2, then android logo, then about 2 seconds later, dead android guy would appear.
HERE is my phone's problem:
in this step after showing android logo, my phone would vibrate once and then just gone black,just like turning off. NO DEAD ANDROID GUY showed up. Certainly would not be able to do the rest steps.
I have searched and tried so many methods that others used when they could not get into the bootloader. NONE of them succeded.
So I need help, guys.
Anyone got any ideas.
Thanks in advanced !!!
no one ?
I guess I had to bring it to the store for repairing.
bluecard said:
no one ?
I guess I had to bring it to the store for repairing.
Click to expand...
Click to collapse
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
bitstra said:
1. power button + volume(down) button
then in bootloader menu:
2. volume(down) button to goto down to 'recovery'
3. volume(up) button for selecting it
Alternative I would try this:
power button + volume(down) button
then in bootloader menu stay here connect usb and use fastboot on pc.
fastboot flashall factoryImage ????
Click to expand...
Click to collapse
post in right forum........... see my signature for 5.0.2 easy installer or search for my kitkat version in xt1068 forum

Help mode "test"

My zuk z2 pro went into test mode and I can not get out
Help
I have the same problem. I cannot even touch the buttons at the bottom, which is very annoying :/
Please see this post
phoenixrap said:
My zuk z2 pro went into test mode and I can not get out
Help
Click to expand...
Click to collapse
I don't enter in the fastboot mode. The phone is blocking in mode FFBM and I can't touch de bottoms on display
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
JBoy53 said:
Nope. I have the same situation and am stuck with the test mode screen when attempt to boot the system. Recovery works fine. Tried the hold both volume buttons and plug into PC, and now have tried this. Always the same screen, nothing about selecting English, just the option to access the Options Menu. Selecting Fastboot takes me to menu where Ican select Recovery, Startup, AND "Boot to FFBM". Have wiped all but internal SD, and "Repaired" System, Persist, Cache. Have tried installing an official ROM and Lineage ROM. No combinations of these have fixed the problem.
Problem started when I was updating the official ROM and decided to try out the FFBM boot option. BIG mistake.
Now am stuck with a system that will no longer boot.
John
Click to expand...
Click to collapse
UPDATE: TWRP 3.0.3-0 saved my ass. It permits selection of booting into EDL (9008) mode, bypassed all the PC based commands that weren't working, and I reloaded Zuk factory ROM again. Got past the test mode screen finally. Discovered that I don't care for the original ROM at all, too many Google things I'm accustomed to (Like Google Play store) missing. Added a few things back in, but wasn't worth the trouble. It took me about 15 minutes to refla sh it using TWRP with the latest nightly version of the Mokee ROM for this device (Android 7.1.2) and it works GREAT. Lineage wasn't ready yet.
The only hold over from all my initial problems is that upon boot it acts of if I'm doing the up Vol button action. It goes to the screen where I can press a Vol button and go into the boot loader or just wait 5 seconds for it to carry on booting normally. I don't know how to correct this, but not really a problem.
Link about TWRP 3.0.3-0 -
HTML:
https://forum.xda-developers.com/zuk-z2-pro/development/twrp-twrp-3-0-3-0-teamwin-recovery-t3529601
N2k1 said:
Press & hold Vol+ and Vol- - now press (and hold) Power until phone vibrates. Release power key.
If there is a new screen, release Vol keys,
Select ENGLISH and shutdown.
Now restart phone
Click to expand...
Click to collapse
Works fine.

Galaxy tab a Sm t510 stuck on TWRP 3.3.1-0 logo

Hi, today i tried to flash twrp on my tablet, i did everything right, like, OEM and unlocked bootloader and etc, i flashed TWRP from the odin on download mode, and now, i cant get out from the twrp logo, its just get stucked there, like, i press vol down + power, the tablet resets, and then, it go back to the twrp screen, and wen i connect to the pc, it dont recognize it, the twrp version that i had installed is the 3.3.1-0, someone can help me with that?
I have the exact same problem except with a T-515 and twrp 3.3.1-2.
Could someone please explain how to solve this problem?
thanks
Same problem with TWRP 3.3.1-1. Did you find any solution?
---------- Post added 13th May 2020 at 12:30 AM ---------- Previous post was 12th May 2020 at 11:44 PM ----------
Solved:
1) used @Magendanz tip how to switch in download mode:
UPDATE: With the right timing, you can break out of a boot loop into Download Mode...but it's tricky:
Insert USB Type C cable connected to your PC
Press and hold the Power and Volume Down keys for exactly 7 seconds (hard reset)
Release the Power key and press and hold both Volume Up & Down keys (enter Download Mode)
If you don't see the blue bootloader unlock warning screen, keep repeating the above two steps
2) in Odin install this TWRP (twrp-3.3.1-7-T510XXS3ATB4-20200413.tar.md5)
https://forum.xda-developers.com/ga...very-twrp-3-3-1-2019-galaxy-tab-10-1-t3934805
---------- Post added at 12:30 AM ---------- Previous post was at 12:30 AM ----------
Solved:
1) used @Magendanz tip how to switch in download mode:
UPDATE: With the right timing, you can break out of a boot loop into Download Mode...but it's tricky:
Insert USB Type C cable connected to your PC
Press and hold the Power and Volume Down keys for exactly 7 seconds (hard reset)
Release the Power key and press and hold both Volume Up & Down keys (enter Download Mode)
If you don't see the blue bootloader unlock warning screen, keep repeating the above two steps
2) in Odin install this TWRP (twrp-3.3.1-7-T510XXS3ATB4-20200413.tar.md5)
https://forum.xda-developers.com/ga...very-twrp-3-3-1-2019-galaxy-tab-10-1-t3934805

Categories

Resources