I create viper4android 2.5.0.5 zip to flash.
Steps:
1. Download zip
2. Put zip to device via cabel
3. Boot to TWRP(you need to have unlocked and rooted device)
4. Flash zip which you download
5. Wipe dalvik cache and reboot
You don't have to set linux to perrmisive, I didn't do it and it's work amazing.
Happy flashing
LINK:
https://drive.google.com/open?id=0B6NFfzOiPwTCaXl2WUEzUEpfbXM
what a bout setting?Is it cool to says "No" on Processing line?!
KarloH said:
I create viper4android 2.5.0.5 zip to flash.
Steps:
1. Download zip
2. Put zip to device via cabel
3. Boot to TWRP(you need to have unlocked and rooted device)
4. Flash zip which you download
5. Wipe dalvik cache and reboot
You don't have to set linux to perrmisive, I didn't do it and it's work amazing.
Happy flashing
LINK:
https://drive.google.com/open?id=0B6NFfzOiPwTCaXl2WUEzUEpfbXM
Click to expand...
Click to collapse
:good:
update!!!! New build "aicp_clover_o-13.1-mordiford-20190129_043407.zip"
1. Download Base ROM-non-gsi AICP-mordiford (aicp_clover_o-13.1-mordiford-20181220_004447.zip)
https://cloud.akane.blue/nextcloud/s/PbGugWPefp9fFNZ?path=/clover
2. Download RR 7.0 GSI (system-190120-arm64-aonly-vanilla-nosu.img)
https://get.resurrectionremix.com/?dir=gsi
3. Download NanoDroid Stable v.20.5.1 https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928
4. TWRP -https://mega.nz/#!qcA2BQIJ!xiBnnC0B4Z7fqpARbIY2ARdDY4hJLZgsriJsWaCCzNQ
============
Step
1. unlocked BootLoader
2. Boot TWRP and clean your ROM.
3. Flash BASE ROM (8.1 non-gsi AICP-mordiford)
4. Advanced wipe -Dalvik , Data , Cache , system
5. Flash System image ( RR 7.0 GSI )
6. Flash Open GAPPs (RM64-9.0-Nano)
***Fix Error 70 Gapps in TWRP
- go to Advanced Wipe
- select System partition
and click repair or change file system
- select Resize File System option
7. Reboot to system
Since the Pie update GSIs are not working because of System-as-root partiton But ASUS launched a new update in which GSIs are working.
READ WHOLE THREAD CAREFULLY.
REQUIREMENTS:
Unlocked bootloader (After Unlocking bootloader you will get a Red END OF STATE Warning. Don't Worry Press Power Button on that screen
Decrypted Data
Should be on latest firmware
If You're Using PitchBlack Recovery:
1. Boot into Recovery
2. Click On Advanced > Additional > Special > Setting OTA
3. Uncheck "Disable DM-Verity" Option Here
4. Done, Now You Can Use PitchBlack To Flash GSI on Pie Vendor.
INSTALLATION METHOD:
1. Download Any GSI of A/B type.
2. Download latest magisk manager zip
3. Patch your boot.img with Magisk (Tick on Preserve dm-verity by clicking on Advanced settins in magisk) or Download from Here
4. Boot into Recovery and Wipe Data, Dalvik Cache. Do not wipe system
5. Flash patched boot.img
Note: If your data is Encrypted then This step should be done with pitchblack otherwise your data may remain encrypted
6. Flash GSI image
7. Flash latest Magisk.
8. Go to Wipe option > Select Advanced Wipe > Tick on system > Click on Repair or Resize > Click on Resize.
9. Optional : Flash Gapps According to your choice If Gapps are not included in GSI.
10. Reboot System.
There is a possibility That your device will reboot again after asus logo. Don't worry
HIT THANKS IF I HELPED YOU:good:
do you see the red state warning after booting into gsi
sir iam unable to flash gapps after flashing the gsi. TWRP says the gapps variant is incompatible. I tried to flash arm 64 pico for pie. The gsi though boots. I flashed RR pie gsi (A/B) with pie vendor.. Please help Thanks in advance
jeno33 said:
sir iam unable to flash gapps after flashing the gsi. TWRP says the gapps variant is incompatible. I tried to flash arm 64 pico for pie. The gsi though boots. I flashed RR pie gsi (A/B) with pie vendor.. Please help Thanks in advance
Click to expand...
Click to collapse
Sorry I didn't mentioned in guide, that you've to modify script of gapps to get it working. I'll upload modified gapps tomorrow. Again I apologize
jeno33 said:
do you see the red state warning after booting into gsi
Click to expand...
Click to collapse
Red state warning is due to unlocked bootloader. It'll remain as long as bootloader is unlocked. But that doesn't create any problem except for increasing boot time by 5-6 seconds.
use A/B type cannot flash gapps,error 64. A type can flash gapps. Why?
gxfuzion92 said:
use A/B type cannot flash gapps,error 64. A type can flash gapps. Why?
Click to expand...
Click to collapse
Updater-script needs to be modified inside gapps, because gapps wrongly detects architecture as arm.
Install this gappshttps://drive.google.com/file/d/1nS2z4emxHovZ0x3CqXl59r8oBqx9DiPU/view?usp=drivesdk
I have modified the script
what rums for example are loaded and working?
currently the Havoc-OS-v2.0-20181027-GSI-ARM64-Aonly-Official is being loaded and running.
tried miui, flyme, Havoc-OS other versions
Is there any video tutorial?
Any tutorial videos?
gxfuzion92 said:
use A/B type cannot flash gapps,error 64. A type can flash gapps. Why?
Click to expand...
Click to collapse
Hey you able to flash any GSI except havoc 2.0 ??
I'm not able to access your document
Guys I successfully installed HAVOC-OS located https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-havoc-os-t3930030. The steps I followed are mentioned below
1. Wipe everything except internal storage.
2. Flashed BRK3 Vendor https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw!IQsjlYzA
2. Installed Endurance GSI kernel https://forum.xda-developers.com/galaxy-s9/samsung-galaxy-s9--s9-cross-device-development/kernel-endurance-kernel-v1-0-t3849434
3. Flashed the system image for ARM 64 A only
4. Boot system
5. Reboot to recovery and Flashed Mgisk
6. Gapps will fail to install at first. Just goto wipe -> Adv wipe -> system partition -> Resize. Reboot to recovery and flash Gapps
7. Reboot and enjoy
8. You can test other GSI Roms also and report. The thread is located at https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Thanks buddy. I was looking for the ways to run the GSI. And the method works. Good job
thanks for the guide! im still on an unrooted s9, but if everything works ill definetly make the jump. Can you tell us more about stability, bugs and if there are things not working
So after testing the ROM for 2 days I can say that
1. It is very stable and can be used as a daily driver
2. Everything works, I am not sure about Bluetooth audio though, haven't checked it
3. It can be heavily customized. Unlike LOS, where we have only few of these features available
4. Battery life is the best I got using any other ROM out there (check the screens below). and I am the guy who gets 3 hrs of SOT, when others claimed 5+ hrs on the same ROM.
5. Security patch is latest even as compared to the TW ROMs
6. Regarding camera... Its the same as LOS pie. Use gcam by idan 3.5 fixed and you are good to go.
fingerprint working?
andreMusers said:
fingerprint working?
Click to expand...
Click to collapse
Yes it is
Thanks for trying this out. I'm only a few months in with my exynos S9 on android pie, so I haven't yet learned the details about rooting/recovery for this phone.
I'll wait for your next update regarding daily use, and would love a more detailed step-by-step for installation if that's not too much trouble. I'm honestly loving those screenshots.
How about IMEI, BRK3 Vendor safe..?
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Thanks for the extra instruction man, will test this out soon.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Doesn't work. Stuck on boot logo, loading forever.
Zwulf said:
Doesn't work. Stuck on boot logo, loading forever.
Click to expand...
Click to collapse
me too dont know any fix
EDIT: Somehow i managed to boot the rom but sim won't get detected
Double tap and AOD - work correctly? On snap it does not work well
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Masterofchicken said:
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Click to expand...
Click to collapse
So camera isn't working ,root is still present with magisk and i couldn't disable it with the adb command so safetynet doesn't pass ,i'll say it's not really usable ?
Has anyone found a fix for getting stuck at the s9 logo?..wanting to move to GSI ROMs
I have tried this,
After flash GSI rom, reboot recovery, reboot system and I have bootloop with the first logo Galaxy S9. Can anybody please help me?
@arunrawat2112
Finally I was able to flash some roms but none of them work properly. Can you please help me?
Each ROM thread has a different installation guide.
So I was confused and tried various installation methods.
"Step 1/2" and "Step 2/2" shown during installation rom, probably means installation on each partition (A, B).
If so, this is the most COMPLETE way I have tried
[Clean Install]
0. reboot to TWRP
1. Format Data, Wipe Cache
2. reboot to recovery
3. Flash latest OOS (necessary)
4. Wipe Data, Cache
5. Flash ROM, TWRP
6. reboot to recovery
7. Flash gapps, magisk (If you do not want to be encrypted, flash disable force encryption)
8. reboot to system
[Update]
0. reboot to TWRP
1. Flash ROM(+TWRP)
2. reboot to recovery
3. Flash gapps, magisk (If you do not want to be encrypted, flash disable force encryption)
4. reboot to system