hey...i use a mi max 2(oxygen)....i got into custom roms a few months back although now i am running stock miui....cus every rom i installed booted up but i wasnt able to charge my phone at all on aosp roms and miui roms ....only xiaomi.eu worked for me...can anyone help me??
What do you mean by chargjng issues? Explain in full detail. Do you mean battery? Did you swap out cables, adapters. Lots of aftermarket cables are rubbish. Is it original battery? is the charging connection dirty or defective? Does it need cleaning?
kaya.md said:
What do you mean by chargjng issues? Explain in full detail. Do you mean battery? Did you swap out cables, adapters. Lots of aftermarket cables are rubbish. Is it original battery? is the charging connection dirty or defective? Does it need cleaning?
Click to expand...
Click to collapse
The aosp rom versions cannot be charged unless they go back to twrp mode to charge them....
You have to follow all the instructions to install custom roms correct. If not you might have charging issues.
RayfG said:
You have to follow all the instructions to install custom roms correct. If not you might have charging issues.
Click to expand...
Click to collapse
I followed the instructions correctly and still got the error, for some reason ...
What kind of recovery do you usw? Twrp, orangefox ? And what Version?
RayfG said:
What kind of recovery do you usw? Twrp, orangefox ? And what Version?
Click to expand...
Click to collapse
That Orangefox R11.0 you
I needed 4 times with orangefox for a flawless and correct installation process..... Perhaps u have a similar problem.
RayfG said:
I needed 4 times with orangefox for a flawless and correct installation process..... Perhaps u have a similar problem.
Click to expand...
Click to collapse
Thank you, I will try....
MIUI 12 beast os repack 5 quick charging is working fine... Try this Rom
Arya Bhardwaj said:
MIUI 12 beast os repack 5 quick charging is working fine... Try this Rom
Click to expand...
Click to collapse
I would never use miui Roms. I am very content with havocos
I also had the same problem when installing rom with android versions from 8.0 to 10.0. Before that I used to install android 10 on my device and it works normally. But recently after from MIUI rom back to AOSP it was unable to charge unless I booted into recovery. Please someone please help us, I don't have a lot of money but I will reward you if your advice helps me. Thanks for reading here.[/B]
LKbyH4D3S said:
I also had the same problem when installing rom with android versions from 8.0 to 10.0. Before that I used to install android 10 on my device and it works normally. But recently after from MIUI rom back to AOSP it was unable to charge unless I booted into recovery. Please someone please help us, I don't have a lot of money but I will reward you if your advice helps me. Thanks for reading here.[/B]
Click to expand...
Click to collapse
Did you find a fix ?
Any possible fix or workaround (besides hanging on twrp) for this issue?
Related
Hello! I want to switch from Sony Lollipop 5.1.1 to a stable AOSP based rom. I tried CyanogenMod 12.1 and AOSP Jaguar but I experienced screen freezes and general lag that makes me to go back to stock rom. It is a problem with my device or it is a problem with AOSP roms? What can I do in case that my device has this problem?
hi i tried all cm based roms and oasp roms and i can confirm you that all of them have screen freezes. There aren't any solutions expect to switch to stock based roms.
benplay said:
hi i tried all cm based roms and oasp roms and i can confirm you that all of them have screen freezes. There aren't any solutions expect to switch to stock based roms.
Click to expand...
Click to collapse
thanks for reply. I thought that my phone has problems, but now i am feeling comfortable.
@ LuciIT thanks for reply. I thought that my phone has problems, but now i am feeling comfortable.
Click to expand...
Click to collapse
No problem dude but it's strange because it seemed that some users don't have this issue. The only one i didn't tried is this one http://fxpblog.co/qualcomm-krait-400-family/sony-xperia-z1/ because i don't understand how to flash it. If you want to try. (the aosp one)
benplay said:
No problem dude but it's strange because it seemed that some users don't have this issue. The only one i didn't tried is this one http://fxpblog.co/qualcomm-krait-400-family/sony-xperia-z1/ because i don't understand how to flash it. If you want to try. (the aosp one)
Click to expand...
Click to collapse
I will try it when i will have time. This one can be flashed via fastboot like on nexus devices if you want to try it
LuciIT said:
I will try it when i will have time. This one can be flashed via fastboot like on nexus devices if you want to try it
Click to expand...
Click to collapse
Hey dude just had an idea. Which gapps are you using? I personnaly have ever used open gapps ans Never tried other ones. Can't try to change now, but will probably tomorrow. I'm going to say you how it evolve. Say me if you find a solution or a rom without this issue.
benplay64 said:
Hey dude just had an idea. Which gapps are you using? I personnaly have ever used open gapps ans Never tried other ones. Can't try to change now, but will probably tomorrow. I'm going to say you how it evolve. Say me if you find a solution or a rom without this issue.
Click to expand...
Click to collapse
I am also using open gapps, the aroma especially.
LuciIT said:
I am also using open gapps, the aroma especially.
Click to expand...
Click to collapse
OK so i tried cm with tk gapps from here http://forum.xda-developers.com/android/software/tk-gapps-t3116347 ans it is still freezing.
benplay64 said:
OK so i tried cm with tk gapps from here http://forum.xda-developers.com/android/software/tk-gapps-t3116347 ans it is still freezing.
Click to expand...
Click to collapse
Hmm, I don't really know. I will give it a try without gapps when I will have time. For the moment I need a fully functional phone.
Hi, i know it's ironic to create an account just to get some help but i tried googling everywhere but there's no solution to my problem.
I have installed cyanogenmod for my s3 mini eveything was fine but it wont stay off when charging. Instead of showing the battery percentage, it reboots my phone automatically. So please just help me fix this
Baboonation said:
Hi, i know it's ironic to create an account just to get some help but i tried googling everywhere but there's no solution to my problem.
I have installed cyanogenmod for my s3 mini eveything was fine but it wont stay off when charging. Instead of showing the battery percentage, it reboots my phone automatically. So please just help me fix this
Click to expand...
Click to collapse
Which version of CM are you using?
Also is this offline charging? I recall in earlier versions of CM12.1 offine charging did not work; this could be the case with other ROMs too. Try updating to the latest version.
If that doesn't help try reinstalling the ROM. That's solved countless problems for me.
Good luck
spydr97 said:
Which version of CM are you using?
Also is this offline charging? I recall in earlier versions of CM12.1 offine charging did not work; this could be the case with other ROMs too. Try updating to the latest version.
If that doesn't help try reinstalling the ROM. That's solved countless problems for me.
Good luck
Click to expand...
Click to collapse
im using cyanogenmod 12.1 2016718 release. Thats the latest version for s3 mini. So its just a bug? or is it just my phone?
Baboonation said:
im using cyanogenmod 12.1 2016718 release. Thats the latest version for s3 mini. So its just a bug? or is it just my phone?
Click to expand...
Click to collapse
Could be either one hey; here's what I would try:
1. Wipe cache/dalvik
2. Do a fresh install of the ROM; might have been a flash error
3. Obtain another ROM (Maybe try a KitKat ROM) and try to flash that and see if it works
1 & 2 will determine if its a minor software error
3 will allow you to determine if there is a problem with your phone
Good luck
Hi Guys,
Could someone help me with TWRP and for that matter root for FXP AOSP 7.0.
Thanks very much in advance
Cheers!!
Yawo
yawo76 said:
Hi Guys,
Could someone help me with TWRP and for that matter root for FXP AOSP 7.0.
Thanks very much in advance
Cheers!!
Yawo
Click to expand...
Click to collapse
Earlier I tried and it worked:
I tried flashing TWRP by Fastboot commands & Latest SU zip with TWRP.
But in AOSP Camera is pathetic and front cam is upside down, Quick Charge (Quick Charger) is not working. Have you checked it??
yawo76 said:
Hi Guys,
Could someone help me with TWRP and for that matter root for FXP AOSP 7.0.
Thanks very much in advance
Cheers!!
Yawo
Click to expand...
Click to collapse
Dont use FXP Roms on your device. They warn all users on their webpage that it is really dangerous and can damage your device permanently. At least it slows your devices at about 60%... " fry your emmc and brick your device (this is not a joke)"
http://fxpblog.co/warning/
[email protected] said:
Earlier I tried and it worked:
I tried flashing TWRP by Fastboot commands & Latest SU zip with TWRP.
But in AOSP Camera is pathetic and front cam is upside down, Quick Charge (Quick Charger) is not working. Have you checked it??
Click to expand...
Click to collapse
Thanks, I'm know it works because I was using it before moving to .305 when it was released. I wanted a working TWRP for AOSP Nougat 7.0
Thanks
saturday_night said:
Dont use FXP Roms on your device. They warn all users on their webpage that it is really dangerous and can damage your device permanently. At least it slows your devices at about 60%... " fry your emmc and brick your device (this is not a joke)"
http://fxpblog.co/warning/
Click to expand...
Click to collapse
I'm aware of that. It's the usual disclaimer. Besides I used it for about a month before updating to the new stock .305 firmware.
Thanks
yawo76 said:
I'm aware of that. It's the usual disclaimer. Besides I used it for about a month before updating to the new stock .305 firmware.
Thanks
Click to expand...
Click to collapse
I know exacly that this is not the usual disclaimer, these two bugs are real. I used fxp roms for about three months and the device is getting slower and slower until it dies complete.
saturday_night said:
I know exacly that this is not the usual disclaimer, these two bugs are real. I used fxp roms for about three months and the device is getting slower and slower until it dies complete.
Click to expand...
Click to collapse
Ok, thanks for the information. I'm currently on the .305 firmware so will stay on that.
Fastest ROM
Credits:Samsung Galaxy Note 10.1 - Samsung Electronics
Firmware: TouchWiz - Samsung Electronics
Android 4.4.2 - Google Inc.
Requirements:twrp-3.0.2-0-n801x.img
Download:https://www.androidfilehost.com/?w=files&flid=282751
- Secretwolf98
Not able to log in to wifi. Any ideas that can help me. Thanks.
wicho71 said:
Not able to log in to wifi. Any ideas that can help me. Thanks.
Click to expand...
Click to collapse
Flash this file in the recovery.
Revived my N8013, works great! Mirroring Fix Zip
Deleted everything on the Internal Storage and EXT-SD and flashed this ROM with the WiFi-fix. Very usable. Have been through all the other Custom Roms - this one works without lags and freezes.
Please add this zip to fix mirroring (Yes, works with FireStick) :
https://forum.xda-developers.com/attachment.php?attachmentid=2784504&d=1402087218
GT-N8000?
I was wondering if this ROM works with GT-N8000. I'm own a N8000 and I'm looking for the fastest ROM for the device. Thank you for any responses in advance
nsian001 said:
I was wondering if this ROM works with GT-N8000. I'm own a N8000 and I'm looking for the fastest ROM for the device. Thank you for any responses in advance
Click to expand...
Click to collapse
Were you able to try the ROM yet? I have the N8000 too, and Lineage just isn't working out well for me, so I'm looking for a stable build, and hoping this is it [emoji16]
Sent from my MAR-LX1M using Tapatalk
While flashing with twrp it is saying unable to mount system. My device is n8000
uzumakivishal96 said:
While flashing with twrp it is saying unable to mount system. My device is n8000
Click to expand...
Click to collapse
Need to use the TWRP 3.0.2 provided, I used a version of 3.2 would have the issue.
mkcs said:
Need to use the TWRP 3.0.2 provided, I used a version of 3.2 would have the issue.
Click to expand...
Click to collapse
Oh, when I re-flashed the rom again, the same problem arised even though the twrp is 3.0.2. After several trials, I found that the solution was to REBOOT to recovery after wiping your old system. Then, it could successfully be installed.
I found that the tablet cannot charge in power off mode. Even though I shutdown my tablet during charging, it automatically reboots. Any reason for this?
mkcs said:
I found that the tablet cannot charge in power off mode. Even though I shutdown my tablet during charging, it automatically reboots. Any reason for this?
Click to expand...
Click to collapse
Mine is N8000 as well. I could flash the rom with TWRP3.2 and I still can charge when tablet is power off.
Thanks for this.
I was having problems on the newer roms and went back to basics. All seems well.
I was also happy to see the Boeffla kernel inside. Any chance you have the final version of the Boeffla app? (now that his website is finished?)
Much appreciated!
Flashed on N8000 running Philz_touch_6.48.4-n8000. So far so good. WiFi working. Much more snappier vs AndroidRevolution 21 and LineageOS. Glad i stumbled upon this post.
androidfilehost isn't getting any mirrors :angel:
thanks for this beaut. Revived my note 10.1 n8000 (got a close error glitch on touchwiz but it only needs to wipe after flash rom). only problem is, this is an n8013 rom - coming from a WiFi only tablet, it isn't capable of making calls or sending SMS. But this is one of the fastest rom I have tried (only if you don't mind using an old stock gnote 10.1 rom)
!!! update Havoc-OS-v2.4-20190424 + EAS Kernel
https://developer.arm.com/tools-and...software/linux-kernel/energy-aware-scheduling
Download https://mega.nz/#!UKYHRKwY!6va1U5-mrWL52W4QUeOiMpLu-MgNL_AnPF96vmm89Bc
+++++F2FS Supported TWRP but not Mount External SD-CARD
!!!!! Now Don't need Mokee's TWRP anymore !!!! you can use havoc 's TWRP here > https://mega.nz/#!TQwH0A6R!-vnd140RjDa8HcoG9NcX3m5NuVD6s4z4FiO1L2hXIgU
======================================
Download Mokee ROM (MK 90.0-nightly-xxxxxx)
https://download.mokeedev.com/?device=clover&type=
Download Official Mokee TWRP
https://drive.google.com/file/d/1eNjbSsE3igYsvB4QIHjPGOcgV6RKZrnI/view
Download ROM lastest Havoc-OS-vxxxxxxxx-clover-Official
https://jaist.dl.sourceforge.net/project/havoc-os/clover/
Flash Official Mokee TWRP
Reboot into new recovery
Flash Mookee ROM
Reboot and setup os.
---> forceencrypt on /data
TWRP (change /data partition from EXT4 to F2FS)
-Wipe--->Advanced Wipe--->select Data Partition---->Repair or change File System--->Change File System--->select F2FS
-wipe all ( Dalvik + Data + Cache + System )
-Settings General= Use rm -rf instread of formatting
Reboot into recovery
Flash Havoc-OS-v2.x-2019xxxx
Since I am running Havoc on my mobile I flashed it right away on my mi pad the moment I got it. Now the rom is running for three days without any bugs and very smooth so far. Thanks :good:
Rom is still running smooth. Got an update notification today. Any changelog available?
Thanks for supporting this device.
I just a bit surprised that so little is going on here within the mi pad forum. ?
Best ROM for mi pad 4 plus?
Droid_1 said:
Rom is still running smooth. Got an update notification today. Any changelog available?
Thanks for supporting this device.
I just a bit surprised that so little is going on here within the mi pad forum. ?
Click to expand...
Click to collapse
Hi, I'm really interested in purchasing this tablet (I am a big fan of redmi phones). I was a bit reluctant with the lack of a true global ROM being available and there was nothing on xda last time I checked. But it appears someone has been quite busy developing for this. Have you only tried the havoc ROM? Is everything still running OK for you? If so, I'm thinking I will make the purchase. Any other feedback would be much appreciated.
Thanks.
shaun_prawn said:
Hi, I'm really interested in purchasing this tablet (I am a big fan of redmi phones). I was a bit reluctant with the lack of a true global ROM being available and there was nothing on xda last time I checked. But it appears someone has been quite busy developing for this. Have you only tried the havoc ROM? Is everything still running OK for you? If so, I'm thinking I will make the purchase. Any other feedback would be much appreciated.
Thanks.
Click to expand...
Click to collapse
In the beginning I had the global Rom running which also was smooth, but since I am using Havoc on all my other devices I switched also on my Mi Pad. The rom runs stable. Had no problems, random reboots or other stuff like that. Rom runs fast and I hope the community for the device will grow, because the device has an awesome price performance ratio! :laugh::good:
Awesome! Thanks!
Droid_1 said:
In the beginning I had the global Rom running which also was smooth, but since I am using Havoc on all my other devices I switched also on my Mi Pad. The rom runs stable. Had no problems, random reboots or other stuff like that. Rom runs fast and I hope the community for the device will grow, because the device has an awesome price performance ratio! :laugh::good:
Click to expand...
Click to collapse
Thanks for the quick response. I think I will be purchasing soon, just waiting for a deal on the 128gb version. I can get the 64gb for a decent price atm, so very tempted to grab that instead.
I recently got the redmi note 6 Pro, I have only unlocked bootloader not long ago. Couldn't decide on which ROM to try first, but I have had a couple people recommend the havoc ROM, so I think I will go with that. Then I can have the same on the tablet when I get it.
I really hope to see a bigger community for this tablet too. Thanks again.
shaun_prawn said:
Hi, I'm really interested in purchasing this tablet (I am a big fan of redmi phones). I was a bit reluctant with the lack of a true global ROM being available and there was nothing on xda last time I checked. But it appears someone has been quite busy developing for this. Have you only tried the havoc ROM? Is everything still running OK for you? If so, I'm thinking I will make the purchase. Any other feedback would be much appreciated.
Thanks.
Click to expand...
Click to collapse
@tom.android
Is there anything special to consider for updating?
Is dirty flashing the rom possible?
Droid_1 said:
@tom.android
Is there anything special to consider for updating?
Is dirty flashing the rom possible?
Click to expand...
Click to collapse
Yes you can do (dirty flashing) with no problems.
Hi, as this is my first time flashing anything, I want to be sure I am doing everything right. I have Mi Pad 4 Plus, already unlocked. To use adb and fastboot I need dl.google.com/android/repository/platform-tools-latest-windows.zip right? Then to flash recovery, I rename the file from your link and do: fastboot.exe flash recovery recovery.img -> fastboot.exe boot recovery.img. Should I also flash new firmware osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/? Should I do it like normal ROM flashing using recovery? I was thinking of using Mokee or HavocOS, in case I would prefer to stay with Mokee, your instructions are good, I just do not flash Havoc over Mokee? I am still not decided which one I should install. Also in future if a new version of ROM comes out ,as my partition would be already changed, I would not need to repeat these steps? Also do ''forceencrypt on /data'' means that I should 'encrypt device using screen lock password' in Android OS? I am not quire sure I understand this step. Also where do I exactly 'Settings General= Use rm -rf instead of formatting'? Browsing though old root/flash tutorials I noticed some of them mention tools like: no-verity-opt-encrypt-6.0.zip/Universal DM-Verity and ForceEncrypt Disabler/Disable_Dm-Verity_ForceEncrypt. Are they still needed in any case? I want to flash open gapps and magisk root. Sorry if it seems stupid, I just could not find anything step by step that is actual, some older guides recommend supersu and as I understand it is a thing of a past now.
tom.android said:
Yes you can do (dirty flashing) with no problems.
Click to expand...
Click to collapse
Running the rom for months without any bugs ?flashing updates worked flawlessly. @tom.android thanks for the work