Related
I have a 2 week old Galaxy Tab which Kies refuses to update I did not mess with it in any way, no root, no aftermarket firmware whatsoever...
Current firmware version: PDA:JMG / PHONE:JMA / CSC:JM6 (LUX)
Model number: GT-P1000
Firmware version: 2.2
Baseband version: P1000XXJMA
Kernel version: 2.6.32.9; [email protected] #1
Build number: FROYO.XWJMG
I got it in Belgium which is where I live but the firmware version says LUX which I assume means Luxembourg. Could this be my problem?
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Thanks! I'm trying this as we speak, do you have any idea which sales code to use for Belgium? I tried EUR, it seems logical (Europe?), but I will try them all if I have to -- I'll report back later
Edit: it's not EUR, it shows some weird alphabet, Greek I think I'll keep trying!
Edit 2: PHN gave a Dutch interface but Kies refused to update it as well, so I'll keep on trying different codes
So I tried doing the sane thing (instead of checking each code separately and waiting 2-3 minutes for the device to reset) and looked up every code and the corresponding country. Here's what I got:
YOG (Spain)
XEO (Poland)
XEH (Hungary)
VDH (Hungary)
TPH (Portugal)
SUN (Switzerland)
PHN (Netherlands)
OPT (Portugal)
MOZ (Switzerland)
LUX (Luxemburg)
IRD (Slovakia)
FOP (Spain)
EUR (Greece)
CYO (Cyprus)
COS (Greece)
AUT (Switzerland)
ATO (Austria)
No Belgium... Does this mean I will never be able to update my tab?
I tried LUX (which is a neighbouring country and the code that came with the device) and PHN (which uses the same language and is also a neighbouring country) but when connected to KIES both refused to update
its mean you have to flash your firmware or ask from anyone to give you the CSC files that has your country that in case you are rooted and have CWM i doubt you don't have
so
in second chance follow my guide to flash your stock firmware http://forum.xda-developers.com/showthread.php?t=1133590
u must download your firmware , from samfirmware.com but before download any one , check if it has your country or no , by this link http://www.samfirmware.com/samfit.htm
start to copy the firmware code from each firmware up there and see if its for your country or no ....
is that so hard ?
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
DarkPal said:
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
Click to expand...
Click to collapse
now he is yours , you are the pro with kies update
lol, I used up all my Google-fu and searched everything I could think of.
Anyway, I know how to root and flash custom firmwares -- I've done it with another Samsung -- but I just wanted to do this one the "official" easy way. But it looks like KIES won't play nice
To answer your question, I won the tab so I didn't buy it from a carrier nor was it SIM-locked. I'll see if I can find a JMG/JMF/JMG .zip somewhere and report back later -- thanks
cannot update out of box
even i purchased a galaxy tab from dubai but when i connected to kies it said my version of device could not be updated. but then i followed this link http://forum.xda-developers.com/showthread.php?p=13682956&mode=linear#post13682956 to install gingerbread and now everything is working fine, market and everything else works fine but the pda field and csc field shows empty when i dial *#1234# .
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
wolfie083188 said:
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
Click to expand...
Click to collapse
It's the exact same work to upgrade using kies as it is to flash a custom (or stock) rom using odin3 1.7 (or heimdal).
So in what way is it a pain?
u mean to say if i flash my tab with a stock rom then it can be later updated using kies when further updates are available.
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
I agree -- it's just that I was curious as to why this would happen with an out-of-box stock device.
I know how to use Odin (that is, I know how to follow a tutorial ), I've used it before to flash an Eclair to Froyo, but I'm not sure which ROM to use. I'm on samfirmware.com and downloaded P1000XXJMQ (2.3.3) -- is this the one I should use?
To be honest, I don't even know which samfirmware.com ROM I would need to revert to my current firmware version (PDA:JMG / PHONE:JMA / CSC:JM6)... I think it's either P1000XXJM6 (because of the CSC:JM6) or P1000XWJMG (because of the PDA:JMG)... It's confusing me
So I have 2 questions:
Is P1000XXJMQ a stock Gingerbread?
What ROM do I need in case I want to downgrade to my current firmware? P1000XXJM6 or P1000XWJMG or another one? Edit: I did *#1234# and assume it's P1000XWJMG.
By the way, CSC = Country Sales Code? (just a guess)
Edit: I'm going to flash P1000XXJMQ, I hope I don't brick it, wish me luck I'm a nervous wreck, I drank way too much coffee this morning
Edit 2: the one that samfirmware.com says is JMQ is actually JQ1... still looking for JMQ because I think that's a newer version
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
sarduwie said:
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
Click to expand...
Click to collapse
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
bongski55 said:
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
Click to expand...
Click to collapse
So far it's always been "cannot be updated". I knew it was a CSC problem, I just don't know where to get the right firmware. That's why I asked if P1000XXJMQ is a stock Gingerbread. I'm going to try and find a stock fw and flash it.
Edit: is this the right one: [stock rom][2.3.3] p1000xxjq1 p1000xxjq1 p1000xxjpz ?
JQ1 is stock for Italy
k0sh said:
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Click to expand...
Click to collapse
This worked fine for me. Thx
Hello,
I had a Galaxy S3 Mini i8190N with Android 4.1.2 (AUT).
But this version haved some problems, and i've found Android 4.1.2 (DBT) from april 2013 and just flashed this ROM.
But now says SAMSUNG KIES i don't can't see you're firmware version and Samsung update can not accepted the rules for checking updates.
Now i see that my CSC code is (KOR/Uknown) and not DBT.
How can i set this good? My phone is 100% original, i only just flashed the version from DBT beacause my calling problems and saw that this one was newer!
My phone is not rooted.
Sorry for the bad english.
Greetz,
Marco
PS: The ROM is downloaded from SamMobile en just fashed with ODIN v3.04
hy, you can change csc code from your mobile:
*#272*imei#
then select csc corect
b0g said:
hy, you can change csc code from your mobile:
*#272*imei#
then select csc corect
Click to expand...
Click to collapse
Sorry, that don't work for the galaxy S3 mini. he find nothing.
marcodehaas1987 said:
Sorry, that don't work for the galaxy S3 mini. he find nothing.
Click to expand...
Click to collapse
Download csc celect, but it needs root and will also wipe everything as it need to do a factory reset.
hy,
please follow this steps:
1. flash original firmware for your phone i8190N (AUT), i this this is: http://hotfile.com/dl/186985702/d6a...T-I8190N-SWC-I8190NXXALL4-1355501275.zip.html
2. Do a factory reset
3. *#272*imei#, and modify csc to original (AUT or SWC)
4. the if you want to change firmware to DBT do again *#272*imei#, and modify csc to DBT;
if dont apear DBT please dont go to step 5, 6, because kies dont will sees the see firmware,
because dont have csc DBT and your CSC will go to default KOR
5. flash firmware DBT
6. Do a factory reset
tys0n said:
Download csc celect, but it needs root and will also wipe everything as it need to do a factory reset.
Click to expand...
Click to collapse
Thnx for the tip. i try firtst the post from b0g. If that don't work i go to look how to root my mobile phone for it.
b0g said:
hy,
please follow this steps:
1. flash original firmware for your phone i8190N (AUT), i this this is: ***
2. Do a factory reset
3. *#272*imei#, and modify csc to original (AUT or SWC)
4. the if you want to change firmware to DBT do again *#272*imei#, and modify csc to DBT;
if dont apear DBT please dont go to step 5, 6, because kies dont will sees the see firmware,
because dont have csc DBT and your CSC will go to default KOR
5. flash firmware DBT
6. Do a factory reset
Click to expand...
Click to collapse
Thnx, i'll download now AUT firmware.
b0g said:
hy,
please follow this steps:
1. flash original firmware for your phone i8190N (AUT), i this this is: [/url]
2. Do a factory reset
3. *#272*imei#, and modify csc to original (AUT or SWC)
4. the if you want to change firmware to DBT do again *#272*imei#, and modify csc to DBT;
if dont apear DBT please dont go to step 5, 6, because kies dont will sees the see firmware,
because dont have csc DBT and your CSC will go to default KOR
5. flash firmware DBT
6. Do a factory reset
Click to expand...
Click to collapse
when i'm using the code *#272*IMEI# he says "Connection problem or invalid MMI code"
tys0n said:
Download csc celect, but it needs root and will also wipe everything as it need to do a factory reset.
Click to expand...
Click to collapse
How can i simple root my mobile?
please check this link:
http://forum.xda-developers.com/showpost.php?p=41136148&postcount=3
E:signature vertification failed
i have download the Galaxy S3 Mini Rom Toolit, donate it en used it.
Now i've got the right CSC.
Can you give a more detailed description?
marcodehaas1987 said:
i have download the Galaxy S3 Mini Rom Toolit, donate it en used it.
Now i've got the right CSC.
Click to expand...
Click to collapse
Hi marcodehaas1987,
I have the same issue with fallback KOR CSC after firmware flashing via Odin.
Can you give a more detailed description of the steps you took to reset the CSC?
I appreciate your help.
Cheers,
tedstryker
tedstryker said:
Hi marcodehaas1987,
I have the same issue with fallback KOR CSC after firmware flashing via Odin.
Can you give a more detailed description of the steps you took to reset the CSC?
I appreciate your help.
Cheers,
tedstryker
Click to expand...
Click to collapse
I am busy now, but monday when i'm back home i'll wil tell you the steps.
I hope this not a problem?
marcodehaas1987 said:
I am busy now, but monday when i'm back home i'll wil tell you the steps.
I hope this not a problem?
Click to expand...
Click to collapse
That's just perfect, thanks for your help.
Hello,
I have SM-N960F with XEH CSC.
I have installed by Odin v.3.13.1 XEO polish firmware (4 part firmware) eaven with .pit file. Odin called PASS!, firmware is changed but CSC is still XEH.
*#272#IMEI# doesn't work.
How to change CSC to XEO?
I suffer the same problem
I suffer the same problem
KartofeLone said:
Hello,
I have SM-N960F with XEH CSC.
I have installed by Odin v.3.13.1 XEO polish firmware (4 part firmware) eaven with .pit file. Odin called PASS!, firmware is changed but CSC is still XEH.
*#272#IMEI# doesn't work.
How to change CSC to XEO?
Click to expand...
Click to collapse
I read that you take a pit-file - why?
Did you take this firmware?
https://www.sammobile.com/firmwares/galaxy-note9/SM-N960F/XEO/download/N960FXXS2ARK2/243456/
Where do you see your CSC?
bininga59 said:
I read that you take a pit-file - why?
Did you take this firmware?
https://www.sammobile.com/firmwares/galaxy-note9/SM-N960F/XEO/download/N960FXXS2ARK2/243456/
Where do you see your CSC?
Click to expand...
Click to collapse
Thank you for intrest in my problem.
Tutorial on polish forum said to take a .pit file and check repartition box - I followed instructions.
I see my CSC in Settings/Telephone - informations (I'm translating from polish it may be diferent named in english, it's last card on the bottom of Settings)/Firmware informations - there I can see CSC
About 10 minutes ago I have resolved the issue.
I have inserted different sim card (from my work) and CSC has changed to XEH/XEH/XEO/XEH.
Then I switch SIM to second slot and CSC become XEH/XEO/XEO/XEH.
Then I did factory reset and now I have XEO/XEO/XEO/XEH
Bottom line instaling new firmware doesn't automaticaly change CSC. You need to insert SIM card to one slot, then to second slot and then do factory reset.
I hope this could help others.
Edit:
Not every SIM card will change CSC. If you have trouble try different SIM card preferably from different operator.
This post was published over 4 year ago, and now I encounter this issue too!
My phone is SM-N960N, and I did flash the corresponding firmware with .pit for multiple times with original system unchanged (CSC code: KTC). What's more, I just got this phone last night!
Does the computer OS itself cause this issue? I promise that Samsung USB driver is well installed.
Hello everyone! I made a tutorial regarding flashing the latest updates, flashing custom ROMs or unbricking your device:
Video guide:
Spoiler: Video
Steps:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by invmini:
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
I hope it helps you!
Hello, I am trying to switch from an Orange operator rom to a Samsung XEF rom, the problem is that when I flash everything goes normally but the rom does not flash and remains in Orange rom. Yet I have no error message.
For some reason I can't get it to detect my phone after plugging it in. Odd.
AlphAndroid said:
For some reason I can't get it to detect my phone after plugging it in. Odd.
Click to expand...
Click to collapse
Does this require the samsung USB drivers?
AlphAndroid said:
Does this require the samsung USB drivers?
Click to expand...
Click to collapse
Yes. Windows is supposed to automatically install the drivers when you plug in your phone.
You may also install them by installing Smart Switch for PC.
give me custom rom first, then will worry how to flash it
Is there any reason (that we know of) why flashing an AT&T device to the unlocked ROM wouldn't work this year as it has in years past?
abowlby said:
Is there any reason (that we know of) why flashing an AT&T device to the unlocked ROM wouldn't work this year as it has in years past?
Click to expand...
Click to collapse
I went from ATT to Verizon without problems. Flashed the Unlocked ROM first and it was fine.
Thanks dude! Removed 409 files verizon bloat with guild and u1 updates as well
[QUOTE = "naudmick, příspěvek: 84390799, člen: 4461390"]
Hello, I'm trying to switch from the Orange operator to the Samsung XEF rom ROM, the problem is that when I blink, everything goes normally, but the ROM doesn't blink and stays in the Orange rom. I need to make a mistake.
[/ CITÁT]
I have the same problem I have orx and I would like xez, dbt multicsc rom via Odin didn't help either
edit:
Problem solved, via Samkey application, S21 5G is already supported
For people who can't switch between csc in the same mult csc pack. OXM multi csc pack contains all the european generic and network branded firmware (csc) so if You are at SFR (part of OXM multi pack), and flash it with BTU (part of OXM multi pack) the SFR will stay. What you need to do is to flash it with different multi csc pack (just see what packs are available for your model), then flash it back with OXM multi pack, and it should switch to some generic csc, then if you instert your sim card it should ask you if you want to customize your phone to the inserted sim card and it will change your csc to the one you want.
EDIT. It works with other models as well, usually there is a domain language in each multi csc pack, and for flagship models it's usually DBT or BTU, for cheaper phones it's usually a langauge where the phone sells the most so for some A series models it's either ROM or XEO or XCZ
sivuha0101 said:
For people who can't switch between csc in the same mult csc pack. OXM multi csc pack contains all the european generic and network branded firmware (csc) so if You are at SFR (part of OXM multi pack), and flash it with BTU (part of OXM multi pack) the SFR will stay. What you need to do is to flash it with different multi csc pack (just see what packs are available for your model), then flash it back with OXM multi pack, and it should switch to some generic csc, then if you instert your sim card it should ask you if you want to customize your phone to the inserted sim card and it will change your csc to the one you want.
EDIT. It works with other models as well, usually there is a domain language in each multi csc pack, and for flagship models it's usually DBT or BTU, for cheaper phones it's usually a langauge where the phone sells the most so for some A series models it's either ROM or XEO or XCZ
Click to expand...
Click to collapse
Thanks for that!
I am from Brazil and wanted to install my regional stock ROM but everytime I did it, it went back to my carrier's ROM.
What I did in this case was installing an OXM csc (the german DBT) and then trying again with my stock regional ROM (ZTO).
Removed my SIM card and didn't connect to wifi untill I was sure the stock ROM sticked to the phone.
PS: If anyone reading wants a rom from the OXM multipack and is having troubles, try using the Brazilian ZTO stock rom and then go back to yours.
Alvincp said:
Thanks for that!
I am from Brazil and wanted to install my regional stock ROM but everytime I did it, it went back to my carrier's ROM.
What I did in this case was installing an OXM csc (the german DBT) and then trying again with my stock regional ROM (ZTO).
Removed my SIM card and didn't connect to wifi untill I was sure the stock ROM sticked to the phone.
PS: If anyone reading wants a rom from the OXM multipack and is having troubles, try using the Brazilian ZTO stock rom and then go back to yours.
Click to expand...
Click to collapse
That's true. ZTO is part of a multi csc pack OWO, so it will work for OXM. Good job mate
My S21 Ultra 5G from AT&T is somehow not getting updates and seems to be stuck on ATLF firmware with the December 1, 2020 security patch. Called AT&T...they blamed Samsung and sent me to Samsung. Samsung blamed AT&T and wants me to travel 50 miles away to a Ubreakifix store (official Samsung repair center). Today I called again and AT&T had me factory reset the phone with the result being the same - - no update - software is up to date.
Frija seems to be downloading the newest AUC8 firmware when I put in the model of SM-G998U with ther correct US code which I hope is the AT&T rom.
Is the firmware from Frija safe?
sivuha0101 said:
For people who can't switch between csc in the same mult csc pack. OXM multi csc pack contains all the european generic and network branded firmware (csc) so if You are at SFR (part of OXM multi pack), and flash it with BTU (part of OXM multi pack) the SFR will stay. What you need to do is to flash it with different multi csc pack (just see what packs are available for your model), then flash it back with OXM multi pack, and it should switch to some generic csc, then if you instert your sim card it should ask you if you want to customize your phone to the inserted sim card and it will change your csc to the one you want.
EDIT. It works with other models as well, usually there is a domain language in each multi csc pack, and for flagship models it's usually DBT or BTU, for cheaper phones it's usually a langauge where the phone sells the most so for some A series models it's either ROM or XEO or XCZ
Click to expand...
Click to collapse
hi there
I have done this recently, perhaps with a slight fail on my sight, since i updated to the latest OXM pack, since i wanted to switch to DBT from DTM (german telekom) without reading this thread and your post first. So my phone didn't switch from DTM to DBT. until yesterday i had to wait for the updated security patch for OWO pack to switch. So all went fine and i switched from DTM OXM to OWO and back to OXM again.
But basically here starts my problem (if it is a problem, not sure yet):
My phone switched not to DBT, instead it went to EUX, which i guess is the generic code for complete EU countries? i am not sure, since i couldn't find the sales code or CSC for this anywhere tbh. i have two SIM prepaid SIM cards from a third party o2 contractor, so normally (i have done it on my Note 10 plus), like you mentioned, it should ask you to customize your phone and switch to DBT, but for me it simply doesn't ask or go to DBT at all. It simply keeps the EUX. Which i would not have a problem with, when i get regular updates with it like i would on DBT.
If anyone could give me a hint how to change to DBT or what i did wrong, i would appreciate the help. If EUX is fine for getting updates, i am also fine with that, if someone can confirm this. on OWO the software updater said please contact a samsung service center, since i have german SIMs in the phone, but with OXM package and CSC on EUX currently it just says "software is up to date" so it can connect to the update servers if that helps.
A short pm would be appreciated or maybe some help from an experienced user (more than me lol) via telegram as well.
Cheers
Mike
Oy, when I try to run frija, it tells me I need to have Visual c++ 2008 installed?!
EDIT: Finally found the download for it, but Frija doesn't seem to have firmware for the S21+
I was working with someone to find a way to remove Retail Mode from our S21 (SM-G991U1 XAA), and when using Odin to flash, we accidentally used the same firmware BL file for every section of the install. Now the phone is stuck in download mode, and we can't find a firmware download with replacement AP or CP files. Only a single BL .md5 file, or a set of files that don't seem to fix the problem. I found a link here on the forums to what appears to be exactly what we need, but it takes hours to download for some reason, and then fails partway through each time. Always at a different point in the download, too. Sometimes it gets to 2.5GB, other times 3.7GB, but never the whole file. That link is over in this thread:
G991U and G991U1 Firmware Links and Flashing Discussion Here
This was the link I followed:
U1 firmware
Any thoughts? Any help getting pointed in the right direction would be much appreciated. !
thank you so much , what CSC country has Call recording setting ?
Bofahad said:
thank you so much , what CSC country has Call recording setting ?
Click to expand...
Click to collapse
I suggest Thailand (THL).
Hi there!
I'm from Brazil, here we use the ZTO CSC, but this file is ARO/ZTO/ZTA. Every time i flash the files on ODIN i got ARO active on the phone, not the ZTO. I have both sims to be brazilian operators (ZTO) but it still gets ARO active.
Somebody have any solutions for this?
Thank you!
Use SamKey
thiagomaximus said:
Hi there!
I'm from Brazil, here we use the ZTO CSC, but this file is ARO/ZTO/ZTA. Every time i flash the files on ODIN i got ARO active on the phone, not the ZTO. I have both sims to be brazilian operators (ZTO) but it still gets ARO active.
Somebody have any solutions for this?
Thank you!
Click to expand...
Click to collapse
Root and then change it via Phone Info app....easy....
Hi! for everyone who has the same issue, i achived changing the CSC by dialling *#272*IMEI OF YOUR PHONE#
Easy!
thiagomaximus said:
Hi! for everyone who has the same issue, i achived changing the CSC by dialling *#272*IMEI OF YOUR PHONE#
Easy!
Click to expand...
Click to collapse
Doesn't work...
I figured out the only way now is samkey
Are you using the CSC_OYM or whatever it is called in the firmware pack instead of the HOME_CSC at time to flash it through Odin?.
Formatting data via stock recovery prior to go to Odin and then flashing the proper firmware including the proper CSC file to clean all the remanent carrier traces may solve it, I think.
Yes
SubwayChamp said:
Are you using the CSC_OYM or whatever it is called in the firmware pack instead of the HOME_CSC at time to flash it through Odin?.
Formatting data via stock recovery prior to go to Odin and then flashing the proper firmware including the proper CSC file to clean all the remanent carrier traces may solve it, I think.
Click to expand...
Click to collapse
SubwayChamp said:
Are you using the CSC_OYM or whatever it is called in the firmware pack instead of the HOME_CSC at time to flash it through Odin?.
Formatting data via stock recovery prior to go to Odin and then flashing the proper firmware including the proper CSC file to clean all the remanent carrier traces may solve it, I think.
Click to expand...
Click to collapse
Yes! I did Just that but without success, I think the code way (*#272...) Will work only with personalized csc, multi csc wont work too