Related
[Tutorial] Null_/FreeFalling Theme/Dr Who Sound,Boot Theme / & More (Updated Jan 16)
[Tutorial] Null_ TWRP / Null_ ROM / FreeFalling Theme / Dr Who Sound,Boot Theme / & More
Created by almulder1092 @ xda-developers.com
"Work In Progress, Need to add in Screenshots, And possibly more tutorials - Enjoy"
No Support Via PM - Please stop with the PM. They will now be ignored!
Well after creating my last tutorial, much has changed, wonderful new things have come about. So I thought it was time to create a new tutorial covering the new things.
So after now I have read 1000+ of pages and posts, hopeful this will help cut down on your searches. BUT read the whole tutorial before you ask questions. There are fare to many people that ask questions that are usually covered in the OP (Original Post) of threads. Please be respectful of the Developers Time and not ask dumb questions that have the answer posted.
Things you will need before you continue reading:
Ability to understand what you read
Time and Patients
How to use Google Search
Time and Patients
A brain
Ability be patient with all of us.
Give Credit where credit is due
Lastly Understand that Nobody is responsible for what you do to your gear, except you. And using the guide below will void your warranty
Now that is covered lets continue.
First get and install Wondershare MobileGo for Andoid this will make life easier. (Google it - Link removed by the request of xda)
(If your to cheap to get this great software, why did you pay so much for a watch?)
Alternative way to download apk's from Google Play without Wondershare Download Here
(Note: I do not plan on doing a tutorial using this method as they show one on the site) (Thanks to fOmey for the info)
Alternative way to get apks to your Gear without Wondershare Tutorial Here
This tutorial will take you from a stock rom to the null_ rom with a theme installed and other options.
In this tutorial we will cover the following:
(Clicking on the Titles will let you jump to that part of the tutorial)
(But I recommend you read everything)
Note: null_ is prerooted (It roots your gear for you)
Update your gear to V700XXUAMK7 Firmware
Installing Null_ TWRP
USB Debug Mode
Installing Null_ ROM
Install freefalling Theme
Remap Wrist Flick Gesture
Enable Unknown Source APK Installation
Enable MTP
Activating & Updating Xposed / Activating Modules
GravityBox - Advanced Reboot Menu
Hack Connectivity Service - AKA (Network Spoofer)
Bluetooth Internet Access
Nova Settings
Notifications Icon
Soft Buttons
Watch Styler OR UCCW?
Watch Styler
UCCW
Custom Fonts
Custom Sounds
Bluetooth GPS
Dr Who Sound/Boot Theme
How to install APK’s to your gear Without Wondershare
Full System UI? Get back DBL tap settings for quick Volume and Brightness
NotiCounter Widget
Note: Whenever connecting the gear to the PC use a direct connection. NEVER USE A HUB or such. It has been know to cause issues.
(Direct connection works best.)
Update: Jan 16, 2014
Added NotiCounter Widget Tutorial
Update: Jan 04, 2014
Added to Xposed Tutorial for new options included in Null_17
Added to Bluetooth Internet Access (2 options now for Working Internet)
Updated some screenshots
Need Null_ HELP? Check out NULL_ROM Official Q/A - FAQ- General Discussion thread
Also Search the forums for your questions. Please only post replies that are related to the tutorial. All other questions please check other threads. I read them as well. THANKS!
Current Screenshots of My Gear
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to the following people: (In no particular Order)
xda-developers - fourms site
Moderators - Their Hard work
mark manning - xda moderator
Wondershare - Awesome App
AdamLange - Rear Original Rom Thread
fOmey - Null_ & Lots of info
freefalling0411 - ffeefalling theme
rovo89 - Xposed
C3C076 - GravityBox
appleflap - GPS Info
broeuschmeul - BlueGPS4Droid
almulder1092 - myself LOL!
TeamWin - Original TWRP
Villain ROM - vrthemes
Google - Awesome Search engine / android
Samsung - For the Note 3 & Gear
ShareDroid - ShareGPS
VasuDev - UCCW
Omnitel - Watch Styler
MrBIMC - Ultimate Dynamic Navbar
TeslaCoil Software - Nova Launcher
Matt Rankin - youtube Revovery Mode Video
shimp208 - Minimal ADB & Fastboot
mohlsson - GearLocationBridge
codekiem - APK Downloader
Kakann - Watch Face Thread
noname81 - LMT Launcher
EatHeat - Pie Control
daerragh - Odin 3.09
sting0387 - Finding Network Spoofer
capslock66 - Creating Network Spoofer
st-tps - Creating NotiCounter Widget
xda Members (Can't name you all) - Feedback and Questions
And anyone else I forgot.
If I missed anyone PM me and let me know who and for what.
Update your gear to V700XXUAMK7 Firmware:
Update your gear to V700XXUAMK7 Firmware: (Skip if your already on MK7)
Thanks to almulder1092 for the info
Make sure your gear is running V700XXUAMK7 Firmware, (If you are, you can skip this section.)
Note:If your in the USA and there is no update yet, just download the UK Version (BTU - United Kingdom)
Let update our Galaxy Gears firmware. (A must in you want to do anything below)
Note: This could wipe you data, save anything you need just incase.
Preparation:
Download V700XXUAMK7 Firmware from here - Thanks to AdamLange
Download Odin from here - Thanks to daerragh (Get version 3.09)
Installation:
Put your Gear into Download Mode
a. Press and hold the power button until the Restarting appears
b. Repeatedly press the power button until the Select REBOOT MODE appears
c. Press the power button once to move the selection to Download
d. Press and hold the power button for about 3 sec.
e. You are now in download mode.
Connect your Gear to you PC. (Using the Cradle and Micro USB)
Open Odin
Click on the PDA Button
Locate the V700XXUAMK7 Firmware and select it. (It should be a .md5 file, if it is zipped, then unzip it)
Press Start
Once it is completed it will reboot the gear.
Note: Let your gear sit for a bit as it updates everything. I might look like it is stuck on the Samsung logo, but you should see the word Samsung pulsating. That means its working. Should it take more than 5 mins, simply Press and hold the power button down until it resets.
Note: Should you get the dreaded screen of death, just flash the MK7 ROM back onto your gear and start all over.
Screen of Death (LOL)
Make sure the Gear is activated and connected to your Phone. (Samsung Manual)
How To:
If your unsure how to do this, Return your Gear. (LOL)
Youtube Video - Samsung Gear Watch Download/Recovery Mode How To
Screenshots
Click For Larger View
.
Installing Null_ TWRP:
Installing Null_ TWRP: (Version as of this tutorial is Null_ 03 TWRP)
Thanks to fOmey for this Null_ TWRP
Installing Null_ TWRP:
Preparation:
Download Null_ TWRP - fOmey
READ THE NULL_ TWRP Original Post
Installation:
Put your Gear into Download Mode
Connect your Gear to you PC.
Open Odin
Click on the PDA Button
Locate the Null_ TWRP file and select it. (It should be a .md5 file, if it is zipped, then unzip it)
UNTICK THE AUTO REBOOT OPTION IN ODIN.
Press Start
Once it is completed it will reboot the gear.
Null Quote:
If you find the recovery is not sticking & your Gear wipes when attempting to access recovery after flashing, you must root your Gear prior to installing TWRP again & Run the following commands in ADB:
*NOTE* You will gave to accept a supersuser request popup when executing "SU" command
*NOTE 2* Probably a good idea to run this prior to first installation (To save time)
Code:
$ adb shell
$ su
# mount -o rw,remount /dev/block/mmcblk0p20 /system
# rm /system/recovery-from-boot.p
ADB stands for Android Debug Bridge
If needed "ADB" can be found here on xda - Thanks to shimp208
Youtube Video - How to Flash a Custom ROM (Null_ and others)
\
Reserved for screenshots (Coming Later)
.
USB Debug Mode
USB Debug Mode
Thanks to fOmey for the info
Now put your gear into USB debug mode:
Preparation:
On your Gear Go to Settings >> Gear Info >> About Gear >> and tap Software version 7 times (After the 3rd tap, it will start counting down on how many taps are left before you can access the developer options.)
Now go back one screen and you should see a new option, USB debug Check the box.
Screenshots
Installing Null_ ROM
Installing Null_ ROM (Version as of this tutorial is Null_ 17)
Thanks to fOmey for this Null_ TWRP
Installing Null_ ROM
Preparation:
Read Null_ Original Post. Make sure you understand everyting. What it can and can't do. (Especially about Bluetooth Tether)
Re Read Null_ Original Post. MAKE SURE YOU UNDERSTAND EVERYTHING
Download Null_
Connect the Gear to the PC.
Open up Wondershare and select your Gear.
Click on files, Select the SDcard, then copy the Null_ ROM zip to the root of the SDCARD.
Installation:
Put your Gear into Recovery Mode (Same steps as Download Mode, but select Recovery Instead)
You should now be in TWRP.
Click on Install
Locate the Null_ Rom zip file. (Scroll down the list, it should default to the root of the SDCARD)
Select the Null zip file
Swipe to Confirm Flash
Follow the on screen questions
Install Everything, unless you know what your doing.
Wait for the Gear to finish installation, then Reboot.
Be patient as it updates. Just put the Gear down and let it do its thing. Even once it's booted, its best to give it time to settle things in. (Once booted let it sit about 5 mins)
Note: Please be considerate of other peoples time and take the time to read and search for your question before asking it. 98 times out of 100 it has already been answered many times. Let fOmey do what he does best and work on Null_ don't keep asking him questions that are answered in the Original Post.
Thanks from all of us to those that do read and search before asking.
Note: Should you get the dreaded screen of death, just flash the MK7 ROM back onto your gear and start all over.
Screen of Death (LOL)
Reserved for screenshots (Coming Later)
.
Install freefalling Theme
Install freefalling Theme (Version as of this tutorial is v4)
Thanks to freefalling0411 for this theme
(No current support or development, freefalling0411 is having twins and need to take care of his wife and get back to life. Thanks for the wonderful theme!)
Installing freefalling Theme:
Preparation:
Download the Freefalling Theme
Connect the Gear to the PC.
Open up Wondershare and select your Gear.
Click on files, Select the SDcard, then copy the Null_ zip to the root of the SDCARD.
Installation:
Put your Gear into Recovery Mode
You should now be in TWRP.
Click on Install
Locate the Freefalling theme zip file. (Scroll down the list, it should default to the root of the SDCARD)
Select the Freefalling theme zip file
Swipe to Confirm Flash
Follow the on screen questions
Wait for the Gear to finish installation, then Reboot.
Be patient as it updates. Just put the gear down and let it do its thing. Even once it's booted, its best to give it time to settle things in. (Once booted let it sit about 5 mins)
Note: If you want SystemUI Notifications Bar back (Theme removed it), Get it from here and flash it after the theme has been flash
Reserved for screenshots (Coming Later)
.
Remap Wrist Flick Gesture / Enable Unknown Source APK Installation / Enable MTP
Remap Wrist Flick Gesture / Enable Unknown Source APK Installation / Enable MTP
Thanks to fOmey for the info
Remap Wrist Flick Gesture
How to:
Open up Nova Settings
Goto Gestures & Buttons >> Home Button
Select Default Page. (If you know what your doing, you can change it to what ever you want)
Enable Unknown Source APK Installation:
How to:
Goto Settings >> Security
Check Unknown Sources
Enable MTP: (Allows you to access the SDCard portion of the gear through your PC as you would a usb drive)
How to:
Goto Settings >> Storage
Click on the Menu Button
Select USB computer connection
Check Media Device (MTP)
Remap Wrist Flick Gesturer Screenshots
Enable Unknown Source Screenshots
Enable MTP Screenshots
.
Activating & Updating Xposed / Activating GravityBox
Activating & Updating Xposed / Activating GravityBox - Advanced Reboot Menu / App Settings / Hack Connectivity Service
Thanks to almulder1092 for the info
Activating & Updating Xposed / Activating Modules
How to:
Goto Settings>>Xposed>>Framework
Click on Install/Update
Grant SuperUser Permissions.
Goto Settings>>Xposed>>Modules
Click the checkbox next to App Settings
Click the checkbox next to GravityBox
Click the checkbox next to Hack Connection Service
Click the checkbox next to UDN (If installed)
Reboot (MUST REBOOT HERE)
GravityBox - Advanced Reboot Menu:
How to:
Goto Settings>>GravityBox>>Power Tweaks
Click the checkbox next to Advanced Reboot Menu
Click the checkbox next to Require Reboot Confirmation
Reboot
Hack Connectivity Service
How to:
Goto Settings>>Network Spoofer
Click Wifi and you should see Wifi Spoofed now.
Activating & Updating Xposed / Activating Modules Screenshots
GravityBox Screenshots
Network Spoofer
.
Bluetooth Internet Access
Bluetooth Internet Access
Thanks fOmey & sting0387 for the info
Note: Phone Must Have BT Tethering Option. Most USA Users don't have this option.
Note 2: Playstore / Google Account Manager / Google Map s- These will only work if you have native BT tethering. (Third party apps do not offer the same protocols as native BT Tether and therefore don't work.) (Null_17 fixes this issue)
Bluetooth Internet Access:
Option 1) Phone must have BT Tethering Option.
Preparation:
Turn On BT Tethering on your Phone. (System Settings >> Tethering and Hotspots >> Enable Bluetooth Tethering)
Activation:
On the Gear go to Settings>>Bluetooth
Click on the settings for the profile for your phone.
Scroll down and if you have activated the option on your phone and it supports it, you will see an option to activate on the profile on your gear.
Check the box Internet Access
Option 2) Use 3rd party apps (Such as PdaNet+ / PdaNet Tablet) (Must use Network Spoofer)
Preparation:
On your Gear, Install PdaNet Tablet
On your Phone, Install PdaNet+
Activation:
On the Phone open PdaNet+
Check the box next to Activate Bluetooth Service
On the Gear open PdaNet Tablet
Click onConfigure
Click onAndroid (Bluetooth)
Click onTap here to start scanning...
Once you see your phone appear, Click on it
Go back to the first screen of PdaNet Tablet
Click on Connect (it might be hidden at the bottom of the screen, just a small part is showing, but you can still click on it)
On the Attention screen scroll down and click on I trust this application then click on OK
You should now be greeted with a PdaNet is connected! screen.
Open your Gear Browser and you should see it connect to Google home page.
Note: Should Google Play and such not work even though your browser works, DBL check that you have Network Spoofer enabled and using Spoof WIFI.
Option 1) Phone with native Bluetooth Internet Access Screenshots
Option 2) Using 3rd Part app such as PdaNet+
.
Nova Settings (My Preferences)
Nova Settings
Thanks to almulder1092
Changing Nova Settings: (Preferred settings)
How to:
Open Nova Settings
Desktop
Desktop Grid >> Rows 4, Columns 5
Width Margin >> None
Height Margin >> None
Persistent Search Bar >> Never
Show Shadow (Your Choice, I prefer None)
Home Screens >> Add or remove as many as you like.
Scroll Effect(Your Choice, I prefer wipe (Only available in Prime Version)
Wallpaper Scrolling (Your Choice, I prefer Off)
infinite Scroll (Your Choice, I prefer Checked)
Label Icons (Your Choice, I prefer unchecked)
Resize all widgets >> checked
Widget Overlap >> Checked
Overlap when placing >> Checked
Lock Desktop (Useful for when your done setting the desktop the way you like to prevent accidental changes)
.
Drawer
Drawer App Grid >> Row 3, Columns 3
Scroll Effect (Your Choice, I prefer None)
Background Transparency >> Leave at default
Drawer Style (Your Choice, I prefer Vertical)
Infinity Scroll (Your Choice, I prefer unchecked)
Folders First >> checked
All other options >> default
.
Dock
Enable Dock >> (Your Choice, I prefer checked)
Dock Style >> OFF
Dock Pages (Your Choice, I prefer 1)
Dock Icons (Your Choice, I prefer 6)
Width Margin >> None
Dock Height >> Medium
Small Icons (Your Choice, I prefer checked)
Show Scroll Indicator (Your Choice, I prefer unchecked)
Show Divider (Your Choice, I prefer unchecked)
Infinite Scroll (Your Choice)
Dock as Overlay >> Checked
Automatically Close >> unchecked
.
Folders
Your Choice
.
Look and Feel
Color Theme (Your Choice)
Icon Theme (Your Choice)
Screen Orientation >> Auto-Rotate (Applies only when charging)
All other options (Your Choice)
.
Gestures and Buttons
Home Button (Your Choice, I prefer Default Page)
.
All other settings > default
Note: Nova's reference to the Home Button is actually the function of the writs flick gesture activation.
Notifications Icon / Soft Buttons
Notifications Icon / Soft Buttons
Thanks to fOmey for the info / Thanks to almulder1092 for the info
Creating a Notifications Icon:
How to:
On Nova desktop press and hold
Select Shortcuts >> Activities >> Notifications >> Notifications Activity
Move the icon to where ever you want on the home screens now.
Adding in soft buttons:
How to:
Download Ultimate Dynamic Navbar - thanks MrBIMC
Connect your Gear to Wondershare
Click on your Gear >> Apps (Should list installed apps)
Drag and drop the Ultimate Dynamic Navbar.apk into Wondershare. (This should install the app)
On your Gear goto settings >> Xposed >> Modules
Check Ultimate Dynamic Navbar
Restart the Gear
Once restarted, let the gear again sit for a few mins before you start doing anything again
Open up UDN, Grant it superuser permissions
Turn it on
General Settings
Start at boot - Checked
Type of Trigger (Your Choice, I prefer Whole bottom edge)
Method to activate (Your Choice, I prefer Swipe)
Alternatives to UDN: (Should you have one you prefer let me know and I will list it for others)
LMT Launcher
Pie Control
GMD Gesture Control
Creating a Notifications Icons Sreenshots
Adding in soft buttons Screenshots
.
Watch Styler OR UCCW? / Watch Styler:
Watch Styler OR UCCW? / Watch Styler
Thanks to almulder1092 for the info
Watch Styler OR UCCW?
This is a matter of opinion I like to use UCCW as it is more customizable. However if all your looking for is a Watch Face only, then my all means get watch styler. Both would be widgets to add to Nova home screens.
Need so Ideas, check out this thread - Thanks to Kakann for starting the thread
Watch Styler:
How to:
On your Phone, Install Watch Styler through the Gear Manger >> Samsung Store. (You may need to hit accept on your Gear to install it)
On your Phone, Open Watch Styler, select or create a new face.
Apply the selected Watch face
In Gear Manager goto >> Clocks
Select WatchStyler
Then select the settings icon.
Select the Watch Face you want again
Apply the theme. (The Applied theme should reflect the new selection
On your Gear, On Nova desktop press and hold
Select Widgets >> WatchStyler
Reserved for screenshots (Coming Later)
.
UCCW (Ultimate Custom Widget)
UCCW (Ultimate Custom Widget)
Thanks to almulder1092 for the info
UCCW:
Preparation:
Disconnect your Gear from the PC (If it was connected)
Connect your Phone to PC,
Open Wondershare, Make sure it sees your phone, If not enable debug mode on it just like you did the gear.
Click on Google Play Apps
Search for UCCW, then install. (This should install it to your Phone)
Once installed unplug your phone and plug in your Gear
Click install again (This should install it to your gear)
Note: Now the best thing here to do is create the new widget on your phone first. (Much easier) then transfer it to your Gear. (But you can just make it on your gear if you want to, then there is no need to download it to your phone)
How to:
On your Phone open UCCW.
Select New
Home Screen Grid Size 4x4
Widget Size 4x4
Give it a name.
Select New Skin
Now before you do anything else select Edit objects >> Background >> Dimensions >> Width x Height
Change it to be 320 x 320 (That is the size of the Gear screen)
Now add and customize to what you like.
Once done press Save.
Select Make uzip (for sharing)
Name the Widget
Plug your Phone into the PC
In Wondershare click on your Phone then files
Click on your SDCard, and locate the uccwOutput folder. (you might have 2 SDcards, so check both)
Click on it, then select the Widget you created (.uzip)
Export the file to your computer
.
Connect your Gear to the PC
In Wondershare Select your Gear
Click on your SDCard
Create a folder called uccwOutput
select the new folder
Drag and drop the widget (uzip) file from your PC to Wondershare.
On your Gear open UCCW
Activate the soft buttons
Press and hold the return button (Long press activates the menu button)
Select Open >> Open uzip
Locate the Widget (uzip) you just transferred
Select it and open it.
Press the soft menu button again and select Save >> Save Skin
Note: Not all items in UCCW are compatible with the gear. Things like Weather, Location, Temperature, Forecast, Gmail, Alerts, do not work.
Installation of Widget.
On your Gear, On Nova desktop press and hold
Select Widgets >> UCCW >> 4X4
Select the New widget you just saved.
Resize to fit desktop if needed.
Note: If you just get a black screen with the words Loading... Then you did not save the Widget correctly.
Reserved for screenshots (Coming Later)
.
Custom Fonts / Sounds
Custom Fonts / Sounds
Thanks to almulder1092 for the info
Custom Fonts for your Gear (by Me)
How to:
Connect your Gear to the PC
In Wondershare Select your Gear
Click on your SDCard
In the root of your SDCard create a new folder called Fonts
Open the new fonts folder.
Drag and drop .ttf fonts into this folder for use on your gear
Custom Sounds (Notifications / Ringtones) (by Me)
How to:
Connect your Gear to the PC
In Wondershare Select your Gear
Click on your SDCard
In the root of your SDCard Find the folder called Notifications or Ringtones (What ever type your looking to add)
Open the folder.
Drag and drop .ogg or .mp3's into this folder for use on your Gear.
Reboot Gear for them to show up under Settings >> Sound >> Notifications or Ringtones
Screenshots
Click For Larger View
.
Bluetooth GPS
Bluetooth GPS (How to receive GPS from phone to gear.) -
(Option 1)
Bluetooth GPS Using ShareGPS: (Uses your Phones GPS, only activate when needed, Battery Drain)
Thanks to appelflap for the info
Installation:
Connect your Phone to Wondershare
Click on Google Play and Download/Install ShareGPS
Disconnect your Phone and connect your Gear to Wondershare
Click on Apps
Downlaod BlueGPS4Droid - Thanks broeuschmeul
Drag and drop the BlueGPS4Droid.apk to Wondershare
Setup:
On your Gear goto Settings >> Developers Options
Locate Allow Mock Locations"and check it
On your Phone launch Share GPS
On your Gear launch BlueGPS4Droid
Select Choose Bluetooth GPS
Select your Phone.
Check Start/Stop GPS
On your phone you can verify if it connected.
Open ShareGPS again
Look at Bluetooth Status it should be now connected to your Gear.
Note: ShareGPS will not connect to the gear if a Third party internet Tether is connected.(Native Tether is OK)
(Option 2) - Preferred!
Bluetooth GPS Using GearLocationBridge: (Options None, Wifi/Cell Location or GPS, better battery life using Wifi/Cell )
Thanks to mohlsson for the app OP
Preparation:
Download GearLocationBridge.apk (github Link)
Installation:
Connect your Phone to Wondershare
Click your Phone >> Apps
Drag and drop the GearLocationBridge.apk into Wondershare. (This should install the app)
Disconnect your Phone and connect your Gear to Wondershare
Click on your [BGear >> ]Apps[/B]
Drag and drop the GearLocationBridge.apk into Wondershare. (This should install the app)
Setup:
On your Phone open Gear Location Bridge
Select Network location bridged
On your Gear goto Settings >> Developers Options
Locate Allow Mock Locations"and check it
On your Gear open Gear Location Bridge
Select Network location bridged
Wait a Min and it should connect automatically.
Wifi/Cell updates every 5 minutes if your location has move 100+ meters.
Method can be changed on Phone or Gear (As it affects both)
GearLocationBridge Screenshots
.
Dr Who Sound Theme
Dr Who Sound/Boot Theme
Thanks to almulder1092 for the theme
Dr Who Sound/Boot Theme
UI Sounds:
Charger Connection - Cyberman "Upgrade in progress"
Hourly Alert - K-9 "Affirmative"
LowBattery - K-9 "Danger Master, Danger)
Power On - Dr "This watch is me"
Power Off - K-9 "Goodby Master"
Alarm - "The Rings of Akhaten - "Wake Up" song (Selected 0:50 of the song)
Notifications: (Selectable)
Dr - "Hello, Im the Doctor"
Dr - "This is my Timey Wimey detector, it goes ding when there is stuff"
Dr - "Wibley Wobley Timey Wimey"
K-9 - "Incoming Message Master"
Ringtones: (Selectable)
Dr Who Theme (8th Doctor)
Ring Ring "Help Me Doctor! Help Me Doctor!" beep beep beep beep
Preparation:
Download the Dr_Who_Sound_Boot_Theme.zip
Connect the Gear to the PC.
Open up Wondershare and select your Gear.
Click on files, Select the SDcard, then copy the Dr_Who_Sound_Boot_Theme.zip to the root of the SDCARD.
Installation:
Put your Gear into Recovery Mode
You should now be in TWRP.
Click on Install
Locate the Dr_Who_Sound_Boot_Theme.zip file. (Scroll down the list, it should default to the root of the SDCARD)
Select the Dr_Who_Sound_Boot_Theme.zip file
Swipe to Confirm Flash
Wait for the Gear to finish installation, then Reboot.
Be patient as it updates. Just put the gear down and let it do its thing. Even once it's booted, its best to give it time to settle things in. (Once booted let it sit about 5 mins)
Restore Original/Samsung Sound/Boot Theme:
Download the Original_Sound_Boot_Theme.zip
Follow the same steps as above but select and use the Original_Sound_Boot_Theme.zip instead.
Screenshots Doctor Who Boot / Samsung Boot
.
How to install APK’s to your gear. Without Wondershare
How to install APK’s to your gear Without Wondershare
Thanks to almulder1092 for the info
This is for anyone looking for an alternative way of getting apps onto the gear.
These instructions work for people who have a Windows/Mac/Linux.
Download fastboot. - DropBox - Zippyshare
Unzip fastboot the root of your drive (You can delete it later when done, or advanced users can unzip it anywhere)
Make sure your Gear is in USB Debug mode
If you’re using Mac or Linux, You can skip this step. If your using windows, make sure you have installed the Samsung USB Drivers.
Plug your Gear into your PC
Now open up a Command Prompt (Terminal window for Mac/Linux) (Google it if you’re unsure how)
.
Type in the following:
For Windows:
cd\
.
cd fastboot
.
adb devices
For Mac:
cd\
cd fastboot
chmod 755 *
./adb-mac devices
For Linux
cd\
cd fastboot
chmod 755 *
./adb-linux devices
Look at your gear, there should be a prompt. Press OK. (If you have connect before using USB this might not appear on the gear, just go to the next step))
If it does not come up, then we will need to kill the process adb.exe running and try launching it from the command prompt again.
Windows:
Open Task Manager, Locate adb.exe and end the task.
Mac/Linux:
Type in the command:
kill adb
Now type in the following:
Windows:
adb devices
Mac:
./adb-mac devices
Linux:
./adb-linux devices
Looking at the Command windows (Terminal window) You should see device. (If you do – GREAT, else go back and try again)
.
Move you apk file you want to install to the fastboot directory
Use the following command to install your apk file:
Windows:
adb install nameoffile.apk
.
Mac:
./adb-mac install nameoffile.apk
Linux:
./adb-linux install nameoffile.apk
Once installed the app should appear on your gear under the apps section.
Noticed AshtonTS had also posted Mac guide so I am linking to it here incase others need it.
Full System UI? Get back DBL tap settings for quick Volume and Brightness
Full System UI? Get back DBL tap settings for quick Volume and Brightness
thanks to fOmey for the info.
If you have installed full system ui, then you might have noticed that a dbl finger dbl tap does not bring up you quick settings anymore. Not current;y there is no way to get that exact view back, as it has been replaced. fOmey has looked into extracting it out, but does not look like i can be done.
But never fear a solution is here.
Option 1)
Put Nova Launcher Prime on your gear so you have access to the Gestures and edit the dbl tap option
Option 2)
Create a shortcut.
What ever option you chose the result will be that same in the end.
How to:
Be sure you have Xposed & GravityBox installed and Activated. (See post #8)
Open up GravityBox
Goto >> Statusbar Tweaks >> QuickSettings Managment >> Statusbar QuickSettings Tiles
Then Select the following
Volume
Ringer Mode
Bluetooth
Brightness
Battery Status
And any other quick options you want.
Now go back to your desktop
press and hold to bring up options
Select Nova Actions >> Expand Quick Settings
You should now have an Icon on your desktop that when pressed will open up Quick Settings for you.
Note: If you have Nova Prime, and want to use a gesture, just select the gesture and then Select Nova Actions >> Expand Quick Settings
Note: You can go back into GraveBox and resort the tiles to your liking. (Along with many other options.
GraveBox Settings Screenshots
Nova Shortcut Screenshots
.
]NotiCounter Widget
NotiCounter Widget (Version as of this tutorial is v1.0)
Thanks to st-tps for creating it.
If your using Null_ and tired of not having a notification badge on your screen, this is the answer.
NotiCounter is just as the title suggests. Its a Widget that you can customize and have notification counts show on your gear screen. And it includes custom sounds.
Preparation.
If you have a previous version be sure to uninstall it before installing the new version.
Download NotiCounter Widget from here
Installation
Install NotiCounterWidget
Reboot Your Gear (Must Reboot after install)
Once rebooted go into Gear Settings >> Sound >> Notifications
Select NotiSilent (If it is not in your list, Did you reboot?) This is simply a blank sound file. this needs to be selected to avoid multiple notifications sounds (Note: Skip this step if you Don't plan to use the sound features in Noti.)
Now to avoid the repeated notification that Noti has been granted SU permissions, lets disable that message.
Open Super SU
Press the # next to NotiCouonter Widget
On the Notifications "Global Default" change that to read Disabled. This will stop the notifications from comming on everytime your screen turns on.
Open NotiCounter Widget app
Read the Pop up box.
Wait for SU permissions to kick in and the give the app SU permissions.
.
Play Sound? Check this box if you want to have a sound play when a notification comes in. (Be sure you did step 4 if you select this)
You can leave the sound file at default or Select a different one. (Click on Choose File)
Once you Select Choose File you will be give a list of sounds that have been included with Noti app.
Select any file and you will hear a preview of the sound file.
If you want to use your own personal sound files, go up one directory and the select Notifications folder. (See previous tutorials for adding custom sound files)
Once you have selected your sound file you want, then click Set
.
Custom Sounds? Check this box if you want to have custom sounds play according to the app .
Select Add Apps
You will be presented with a list of all apps that are set to send notifications to your gear.
Select any app you want a custom sound for
Select the sound file just as you could have above.
Once Selected you will see a Toast message box appear at the bottom letting you know it has been set.
Continue to add any other Custom Apps sounds you want to use.
Once your done got back to main Noti Screen.
If you made a mistake on one of the apps, select Edit List
You will be presented with a list of all the apps selected. Press and hold to edit anyone of them
You will have the option to Change, Abort, Delete.
Once done go back to main Noti Screen
.
Launch Notifications app on tap? Just as it says, Do you want to open the notifications screen when taping on the widget?
Text Size - you can change the text size to larger or small according to your needs
Color - This will alow you to change the color of the text using the sliders as needed.
Widget Background (Ellipse, Round, Transparent, Custom)
Custom Background - Selecting this will allow you to have a custom background
Select your background similar to how you selected a sound. when selecting a pic you will see a preview of it for a few seconds.
Blank spot at 0 unread Notifications? Basically do you want to see a number 0 or nothing at all when there are no notifications?
Power-saving Mode? Normal, Medium Saver, Power Saver. - Normal will give your a more stock feel for the Gear (I prefer Normal)
Normal - Checks for activity in the notifications app, if it´s running it does badge checks with a certain intervall.
Medium Saver - Checks for activity in the notifications app, if it´s running it does badge checks with a certain intervall. When Notifications hit 0 it stops the checks
Power Saver - Only checks Once upon screen On, then nothing.
Restore all Data - This will remove the sound files that Nofi install. If you want to remove Noti you might want to press this button first.
Now that you have your settings Press Save
Now place the widget like you would any other widget.
you will see two options for your widget. Normal and Bold. that is in reference to the Text number. (I prefer Bold)
Check out your new Noti widget.
(Reserved 19) Future Tutorial
Here is a quick guide to enable multi windows in CM11 for the Nook Color.
1. Install Xposed framework installer. Activate and reboot.
2. Install XHalo Floating Windows module. Activate and reboot.
3. Open XHalo Floating Window module. Go to Status Taskbar (2nd from bottom).
4. Enable Statusbar Launcher=ON
5. Set Max Number of Apps
6. Pin Apps
7. Reboot and enjoy.
Alternatives to Statusbar Launcher (steps 5 and 6 do not apply if using either alternative)
4. Blacklist apps (app exclusions only)
4. Whitelist apps (app inclusions only)
Attached are some screen pics of multi window usage.
Introduction
This ROM is based on lost101's, kingkaminari's and VitaTaf's work you can find here. The main aim of my modifications is putting debloating to the extreme and getting rid of intrusive Google spying services that violate user's privacy. Before you flash this ROM read all the information below and make sure you still want to do it as some stuff you find essential might be missing and irreplaceble. Please also mind you will have to setup your device manually with ADB to unlock all of its functions.
Disclaimer
Even if everything works 100% fine for me I take no responsibility for anything that happens to anyone else's device after flashing my ROM. If you want to try it, do it on your own risk. Always backup your data.
Description
This is Identity Crisis 6 LTE v1.0a by lost101, kingkaminari and VitaTaf with the following modifications:
Version 1.2c
Changes
Version 1.0
1. build.prop
#USB debugging lock bypass
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
It is advised to remove these lines from build.prop after you're done with setup as they compromise your device's security
2. Removed from system/app:
- BasicDreams
- BookmarkProvider
- Calculator
- CalendarGoogle
- com.motorola.android.setting.diag_mdlog
- DeskClockGoogle
- Exchange3Google
- FaceLock
- FMRadioService
- GoogleContactsSyncAdapter
- HoloSpiralWallpaper
- HTMLViewer
- LatinImeGoogle
- LiveWallpapers
- LiveWallpaperPicker
- NoiseField
- PartnerBookmarksProvider
- PhaseBeam
- Piktures
- PrintSpooler
- UserDictionaryProvider
3. Removed from system/etc/permissions:
- com.google.android.maps.xml
- com.google.android.media.effects.xml
- com.google.widevine.software.drm.xml
- com.motorola.camera.xml
- com.motorola.context.xml
- com.motorola.gallery.xml
- com.motorola.software.fmradioservice.xml
- com.motorola.software.storageoptimizer.xml
4. Removed from system/framework:
- com.google.android.maps.jar
- com.google.android.media.effects.jar
- com.google.widevine.software.drm.jar
- com.motorola.android.dropboxhelper.jar
- com.motorola.gallery.jar
5. Removed from system/priv-app:
- AppDirectedSmsProxy
- atfwd
- AudioEffects
- BackupRestoreConfirmation
- CalendarProvider
- CallLogBackup
- CellBroadcastReceiver
- ConfigUpdater
- Contacts
- ContactsProvider
- CQATest
- EmaraPhoneExtensions
- GmsCore
- GoogleBackupTransport
- GoogleFeedback
- GoogleLoginService
- GoogleOneTimeInitializer
- GooglePartnerSetup
- GoogleServicesFramework
- MotCamera
- MotoOneTimeInitializer
- Phonesky
- PreloadContacts
- SetupWizard
- SetupWizardExt
- StorageOptimizer
- WallpapaerCropper
- WapPushSI
6. Removed from system/usr/srec:
- en-US folder and its files
7. Removed from system/vendor:
- pittpatt folder and its files
8. Added to system/apps:
- AnySoftKeyboard
- MiXplorer
Flashing
1. Boot into TWRP
(2. Backup)
3. Format data (Wipe>Format data>yes)
4. Transfer ROM to SD card/Local storage
5. Wipe>Factory reset
6. Install
7. Reboot
Setup (version 1.0 only)
When the installation completes you'll find there's no Setup Wizard, and some important UI components (Home button, Notifications, Quick Settings) are blocked. There's also no access to Developer's Options. Don't worry - they're normally being unlocked after you're done with Setup Wizard but since it's not there you need to do it manually:
1. Open ADB terminal on your computer
2. Connect your device
3. Execute the following commands:
Code:
adb shell
su
settings put global device_provisioned 1
settings put secure user_setup_complete 1
reboot
After reboot your device is ready to use.
Known issues
- Please refer to IDCrisis 6 LTE original thread
Life after Google
You can try using Micro GmsCore to access Play Store content, and here are some alternatives:
1. Interesting and useful apps in F-Droid store:
- Adaway (system-wide ad blocker)
- AFWall+ (very nice firewall. I use it in whitelist mode because it blocks internet access to all apps by default)
- Etar (calendar. Won't work without Google calendar service and account)
- K-9 mail (bit ugly but awesome mail client)
- Open camera (stock camera replacement)
- Wifi automatic (turns wifi off when you lock the screen which saves battery and improves security. Bugged a little and randomly disables wifi from time to time)
- SMSsecure (messaging app with encryption)
- 920 Editor (text editor)
- Document Viewer (self explanatory)
- Network Log (self explanatory)
2. Other interesting and useful apps around the web (mostly on XDA):
- ApkTrack (app updates tracker),
- Calc+ (calculator),
- CoolTool (CPU and RAM usage and other info display),
- DejaOffice (office app that looks a bit outdated, but it's the only calendar app to work without Google services I found so far),
- Disconnect.me (private web searches; the app FC right after starting it, probably due to lack of Google search services available)
- DriveDroid (turns the phone into Linux live USB),
- ES File Explorer (file explorer),
- Firefox (web browser),
- Gravity Screen (Turning screen off and on without using physical power button),
- Greenify (apps hibernator),
- KWGT (custom widget maker),
- LiveBoot (Chainfire's app that replaces boot animation with system log display),
- maps.me (open source google maps alternative),
- MiXPlorer (file explorer),
- MoboClean (permissions manager),
- Naked Browser (web browser),
- NetGuard (no-root firewall),
- NeutriNote (notes),
- Nova Launcher (launcher)
- Open Camera (same as F-Droid app),
- Parasol (community based permission manager),
- PryFi (WiFi security),
- QuickPic (gallery),
- Recently ("close all apps" button in recents window),
- Recordr (sound recording app),
- Servicely (services management. Think twice before installing and using it - developer's G+ site, developer's APKMirror downloads
- SD Maid (cleaning tool),
- Super Backup (apps, sms, call logs, etc. backup),
- Titanium Backup (data backup),
- True phone (dialer),
- VLC (media player),
- WifiKill (WiFi killer),
- Wifi Protector (WiFi security, anti-wifikill),
- Xposed
You can find more interesting apps and links on this XDA forum
3. Software that may help you secure your device - sufficientlysecure.org
4. More security software - Secure Mobile Apps
5. XDA Labs (alpha version of XDA app store)
6. Firefox browser add-on that lets you download apk files directly from google play store (without Google account connected to your device) in case you can't find desired app anywhere else.
7. Alternative app-stores, .apk mirrors, etc. - use at your own risk. So far I only tried Amazon's store - the pro is that it exists, the cons are that it requires tons of permissions, has very unfriendly interface, takes a lot of space, and the apps you download will only work as long as the store's app is installed.
Credits and thanks
Motorola for making such a good device
Google for supporting Android (but not for invading it with their intrusive services)
lost101, kingkaminari and VitaTaf - creators of original ROM
HootanParsa - creator of MIxplorer
Menny Even Danan and all creators of AnySoftKeyboard
Tesla Coil and all creators of Nova Launcher
Klaus Weidner, creator of Hacker's Keyboard
All people behind TWRP
All the developers who share useful information and solutions in the web
Please let me know if I missed someone, I'll be happy to update this list
Download
IC6_lte_v1.2c_nogoogle.zip
Identity Crisis 6 LTE v1.0a_NoGApps_mod_v.1.0_beta.zip
Version information
Status: stable
Created: 4.03.2016
Updated: 24.05.2016
reserved
reserved 2
Has anyone had success getting this working yet?
I'm having trouble getting this to work.
Yesterday when I tried to install it i got the following error:
"symlink: no of syymlinks failed = 1
Updater process ended with error: 7
Error installing zip file '/sdcard/Identity+Crisis+6+LTE+v1.0a_NoGApps_mod_v.1.0_beta.zip'
Tried again today and managed to get it to install after rebooting recovery a few times, but ended up getting into a bootloop for 40 minutes.
I tried wiping everything, ART cache, system, data, internal and cache, but still get the same, an endless bootloop.
Any ideas?
Edit: This is on an XT1039
cvamoose said:
Has anyone had success getting this working yet?
I'm having trouble getting this to work.
Yesterday when I tried to install it i got the following error:
"symlink: no of syymlinks failed = 1
Updater process ended with error: 7
Error installing zip file '/sdcard/Identity+Crisis+6+LTE+v1.0a_NoGApps_mod_v.1.0_beta.zip'
Tried again today and managed to get it to install after rebooting recovery a few times, but ended up getting into a bootloop for 40 minutes.
I tried wiping everything, ART cache, system, data, internal and cache, but still get the same, an endless bootloop.
Any ideas?
Edit: This is on an XT1039
Click to expand...
Click to collapse
The first issue is internal TWRP error that happens pretty randomly, just restart recovery and it should be gone. The second thing never really happened to me, and I have to ask if you've followed instalation instructions? They're quite strict. You must wipe data and do a factory reset prior to installation. Just try again, following all steps exactly.
I'd also consider waiting a bit for final stable version with error fixes of lost101's ROM I use as a base. It's still kind of WIP.
I'd sure want to try this out, just wondering how well Google Play and Youtube work with the Micro G framework? Those are basicly the only google apps I use.
I could use the browser for youtube, create a link directly to the homescreen maybe. And I probably could survive without the play store to, just download apk from a mirror and sideload, but it would be kind of a hassle.
Anyhow, I probablt wait a few weeks until the MM rom seems stable.
Are you going to update this with the latest MM build by lost101?
baxtex said:
Are you going to update this with the latest MM build by lost101?
Click to expand...
Click to collapse
V1.2 seems stable, so I'll try to build something on this one, but don't really have much free time atm
No worries, just wondering!
Edit: I could actually remove all this stuff myself, the setup should be identical right?
Edit: Here is a version were I removed the same things you did. But I can't get it to work, or rather, I can't setup the phone. As your description says, you need to set it up with adb. But my computer won't detect the phone. I've tried reinstalling drivers here and there but whatever I do, Windows/adb won't detect any device. I do get a beep however that it is connected, and it says something like MTP usb device. But I can't do anything with that. I've tried installing it as an adb device instead but that didn't work.
https://mega.nz/#!P4k1QYwS!fBCp3E4uyjBXy7x6x_uTLTnj3pWjoIbgpqvodzWfEuQ
So I restored my backup, and I can connect to my pc just fine. In the device manager my device is shown as: Android Device>Motorla ADB Interface.
baxtex said:
No worries, just wondering!
Edit: I could actually remove all this stuff myself, the setup should be identical right?
Edit: Here is a version were I removed the same things you did. But I can't get it to work, or rather, I can't setup the phone. As your description says, you need to set it up with adb. But my computer won't detect the phone. I've tried reinstalling drivers here and there but whatever I do, Windows/adb won't detect any device. I do get a beep however that it is connected, and it says something like MTP usb device. But I can't do anything with that. I've tried installing it as an adb device instead but that didn't work.
https://mega.nz/#!P4k1QYwS!fBCp3E4uyjBXy7x6x_uTLTnj3pWjoIbgpqvodzWfEuQ
So I restored my backup, and I can connect to my pc just fine. In the device manager my device is shown as: Android Device>Motorla ADB Interface.
Click to expand...
Click to collapse
I read through IC thread - Lost101 is still polishing it, so I'll wait for some final build. And I guess you've got problem with ADB connection, because you didn't add persistent ADB debug to build.prop, or added but with some dodgy notepad (in Windows use Notepad++) - the lines that need to be added are in the OP.
minimale_ldz said:
Disclaimer
Even if everything works 100% fine for me I take no responsibility for anything that happens to anyone else's device after flashing my ROM. If you want to try it, do it on your own risk. Always backup your data.
Known issues
- Please refer to IDCrisis 6 LTE original thread
Click to expand...
Click to collapse
I have found a bug.
I was setting a lockscreen password that contained = in it and it came up as bad bad characted (I thought it's just a bug because it wouldn't show that error on stock firmware) so I have tried to enter the same password once more and it worked. Then I have locked the phone and couldn't unlock it because I allways entered the wrong password.
I think that the same thing would happen to encrypted devices.
I have found an interesting app that lets you enter permission control settings without root, because these permission settings is hidden in most android versions that came before marshmallow. Not granual, but still better than nothing.
It's size is 7kb, it asks for no permissions, probably because it's just a shortcut to the settings.
To people who don't have Play Store:
Install BlueStacks on your pc.
Root it using King Root.
Install desired apps using Play Store.
Install ES File Explorer:
From panel select:
-Tools/Root Explorer
-Tools/Show hidden files
-Network/Cloud/+/your desired cloud provider and log in.
-Local/Device/data/app .
Select your installed apps and copy them to your drive.
From your Play Store missing device goto your cloud provider website, log in ,download and install your apps.
This method can be long, but you will have all of the apps that you downloaded on cloud so you won't have to do the same process over and over again.
@minimale_ldz since u bought new phone I have to ask - you still remember about Moto G members, right?
I'm not asking when you'll update this rom, but if you're even going to
toster88 said:
@minimale_ldz since u bought new phone I have to ask - you still remember about Moto G members, right?
I'm not asking when you'll update this rom, but if you're even going to
Click to expand...
Click to collapse
It's coming soon
@toster88 motivated me with his comment to spend some time on preparing updated version of this rom. It' based on @lost101's IC6 LTE 1.2c version and contains a few little changes:
- AnySoftKeyboard replaced with Hacker's Keyboard as ASK is a bit awkward when it comes to accesing numeric keys
- MiXplorer has been updated to the newest version (6.4.0)
- Nova Launcher added (sorry for some artifacts like empty folders or Google search box, but I have no idea how to get rid of them)
- persistent ADB debugging removed from build.prop as it's no longer needed. Init.d script deals with initial device provisionig now. /system/etc/init.d/setup can be removed after first boot if everything is working fine (quick settings, home button, developer's options, etc. are accessible).
That's about it, I hope you'll enjoy this build. Please let me know if there are any bugs specific to this rom (and not to MM or IC6 1.2c) as I'm not using XT1039 as a daily driver anymore.
Temporary Google Drive link is now live
alezardstar said:
@minimale_ldz - Can you share with us how did you manage to debloat all the ROM and purge every GApps out of it preserving its stability? Did you delete the apks by hand using your laptop before installing the zip or what did you exactly do? I'm keen to get this working on the very last release (1.5b) for Falcon.
Thanks in advance.
Click to expand...
Click to collapse
You can just unzip the rom and remove unwanted apps (with their folders) by hand in Windows file explorer and then zip it back. Or, if you wanna feel more like a propper dev you can do it with Superr Kitchen where you create custom debloat list. Both methods are confirmed to work. Removing GApps is a bit tricky as you need to remove all of them - if you leave anything it may give you FCs or black screen after boot. You will also have to choose some way to provision the device without GApps and i believe the smoothest method is by init.d script sice it's enabled in @lost101 rom and doesn't require users to do anything after installation. The script looksi like this:
Code:
#!/system/bin/sh
su -c "settings put global device_provisioned 1"
su -c "settings put secure user_setup_complete 1"
and goes in /system/etc/init.d folder
I hope that helps.
alezardstar said:
Thanks for your response. I definitely shall give it a spin with next Identity Crisis release. It happens to me I do not work on Windows, rather GNU/Linux. Do you think I can delete all the OP mentioned apks and on top of that any missed folder/apk appearing on this link using Fedora 25? As far as I could read, the link I'm passing on has Linux instructions, though being honest, I have no leisure time to read it thoroughly and that's why I'm saying I shall do it next Identity's release better. In the meantime, I want to be a hundred percent sure about what I will do when the moment comes in. Can you tell me what provision is? What does it stand for? Should I get a signature spoofer? All I want to do is Identity working as it works itself, with no GApps and supersu working as it's been working always. Although I'd say installing microG may cushion the blow since it is a FLOSS Google framework that will not make things break in a regular use. To sum it up, do I need to create a .txt file or something with the code and thereafter make it work with a init.d script application or something similar?
Thanks for all your help! Looking forward to hear from you and sorry for my late response. Real life keeps me away from my beloved hobbie: learning.
Click to expand...
Click to collapse
I guess it should work pretty much the same on Linux. Do mind I've removed much more than just GApps and today I'd left some more apps in the rom as I found them useful - eg. Calendar Provider or FM radio, but it's up to you. The bare minimum, required to get rid of GApps is:
Code:
/system/app:
- ConfigUpdater
- CalendarGoogle
- GoogleContactsSyncAdapter
/system/priv-app:
- BackupRestoreConfirmation
- GmsCore
- GoogleBackupTransport
- GoogleFeedback
- GoogleLoginService
- GoogleOneTimeInitializer
- GooglePartnerSetup
- GoogleServicesFramework
- MotoOneTimeInitializer
- Phonesky
- SetupWizard
- SetupWizardExt
The list you linked is more extensive and goes deeper into the system but it's quite similair to what I've done. You cane safely remove
Code:
system/usr/srec/en-US/
as it contains speech recognition files that Google Services use to listen to us.
I was careful with
Code:
system/lib/
because I didn't find any source describing what these libraries are actually for. Removing anything with "google" in its name seems safe. You can compare what IDCrisis has with the list and see if it can be removed safely - there's a lot of experimenting involved but the list looks like a good guide.
Code:
system/vendor/pittpatt/
contains face recognition system that I find useless with or without GApps and it can be safely removed.
Now, when you remove all GApps you'll have to provision your device. Long story short is that when you first boot your phone after flashing new rom it will start with Setup Wizard where you'll be asked for wifi password, google account details and where you accept all terms & conditions. By default you're locked in setup mode until it's finished - you can't use home button to escape it, you can't access settings, etc. If you remove GApps there's no Setup Wizard so your phone will stay in setup mode and you need to end it manually. Like I said before, the best way is to use init.d script. Use Notepad to create new file, copy the lines I posted last time, save it without any extension, I believe its permissions need to be set to 755 (rwxrxrx). Place the file in
Code:
system/etc/init.d
and that's it.
Alternatively you can use ADB or terminal emulator to execute these commands:
Code:
adb shell (only if you use ADB)
su
settings put global device_provisioned 1
settings put secure user_setup_complete 1
or you can use XDRsetup app I made to do the job (it needs root to work).
Good luck
alezardstar said:
@minimale_ldz - Apologies for my late answer. I've been busy. Thanks for your response. It is appreciated what you've done for Peregrine's users and hence for everyone who's willing to ditch GApps from @lost101 builds.
At the moment I'm stuck at a step. I'm on Fedora 25 and I want to remove a whole folder within the system /system/app/MagiskManager/ or whatever the directory is and I can not. Albeit I might delete the superuser and Magisk folders whose location is the very first thing we see as we open the .zip, I can't do the same with folders within the system and I wonder why. The other option is extracting the whole content of the ROM in a new directory and deleting files at my will. Thereafter, I can zip it back. The problem is that I do not know how to zip it back. Do you have any idea of somebody who mod on GNU/Linux?
On the other hand, I saw this apk you passed on to make the init.d script work. The simple steps that popped up on my mind were:
- Factory reset.
- Flash ROM + supersu.zip
How can I put your application within the system folders and ensure it'll work as expected? Another thing that I lack knowledge of is the permissions. How can I give a file or a folder permissions on GNU/Linux? There's nothing else I can think of other than wiping everything, flashing the ROM alongside the supersu.zip and booting up but as you told me, I'd be frozen at the first screen. It's strange for me to get ahead but I'm keen to learn and get ahold from you anytime.
Click to expand...
Click to collapse
My knowlege of Linux is pretty much none. I'm using Ubuntu for Superr's Kitchen and that's it. I don't know how different Fedora is from Ubuntu, but Ubuntu interface is very similair to Windows, so never had any problems with simple files operations like unpacking, deleting, etc, and there's always Google at hand with tons of tips and help. Extracting the rom.zip is a good first step, but I'd install the Kitchen - it really makes things esier.
BTW - beside Magisk and Superuser folders there are also apps in /system/app that need to go if you're deleting binaries. They will survive factory reset but won't work. AFAIK they are in lost101's only temporarily and he said he'll use Chainfire's SU in next version anyway.
For setting permissions, as mostly Windows user, I have two solutions - you can either set them in TWRP using its file manager or do it in Android (I'm using MiXplorer for that). You just need to root your rom first.
And you won't be frozen at the first screen if you remove all GApps and SetupWizard apks.
I got almost everything working, but I can't access the Phone via USB from my WIN7 Desktop. It works with adb/fastboot but not as MobileDevice, also it is shown in WIN-Eplorer as XT1072. It did work before I flashed this ROM.
Any advice would be highly appreciated
Thanks in advance
Solved
"Internal Storage not accessible from PC?
With Marshmallow, the default USB connection type is 'Charging only' mode. You can change USB mode to 'MTP' via the pull-down notification option"
Hello guys ,
New H2OS beta 16/10th is ready to download
#Change Log/Update Log for H2OS Beta 16/10th
-Desktop updates to V2.1, bringing many new features:
-Support weather and calendar dynamic icon display
⁃ add a plus weather table widget
-You can adjust the number of desktop icons and the size of the icon by adding the Desktop Layout option to the desktop settings.
-The desktop grid layout no longer changes as the system displays the size
⁃ application of the new drawer T9 search, search application has never been so fast
⁃ Apply the first row of the drawer to show the most recent search history
⁃ new installation applications have a small blue dot logo, easy to quickly find
-Improve the visual effect of the widget selection page
Functionality Added:
-Bluetooth device power display function
⁃ SMS content automatically identify the email address
⁃ contact lunar birthday reminder function
Optimization:
-The desktop clock widget supports resizing
- Update the clock, a plus account number and other application interface style
-Updated the browser, input method
- Optimize the dual card click on the call log callback logic
- Optimization of a plus add black font library
- Optimize the animation effect of the call interface call
-Optimize Bluetooth device compatibility
Bug fixed/Repair:
⁃ solve the king glory pull down the status bar will stop the operation of the problem
⁃ solve the problem of nail the front camera to take pictures
Source - h2os.com/download
OP3- http://download.h2os.com/oneplus3/P...6_OTA_022_all_1706272151_0da875d901b04b85.zip
OP3T- http://download.h2os.com/OnePlus 3T...8_OTA_022_all_1706272156_d1e5783d21524b6f.zip
link ??
HatRiGt said:
link ??
Click to expand...
Click to collapse
added now
new update is out
Ashish_Maurya said:
Hello guys ,
New H2OS beta 16/10th is ready to download
#Change Log/Update Log for H2OS Beta 16/10th
-Desktop updates to V2.1, bringing many new features:
-Support weather and calendar dynamic icon display
⁃ add a plus weather table widget
-You can adjust the number of desktop icons and the size of the icon by adding the Desktop Layout option to the desktop settings.
-The desktop grid layout no longer changes as the system displays the size
⁃ application of the new drawer T9 search, search application has never been so fast
⁃ Apply the first row of the drawer to show the most recent search history
⁃ new installation applications have a small blue dot logo, easy to quickly find
-Improve the visual effect of the widget selection page
Functionality Added:
-Bluetooth device power display function
⁃ SMS content automatically identify the email address
⁃ contact lunar birthday reminder function
Optimization:
-The desktop clock widget supports resizing
- Update the clock, a plus account number and other application interface style
-Updated the browser, input method
- Optimize the dual card click on the call log callback logic
- Optimization of a plus add black font library
- Optimize the animation effect of the call interface call
-Optimize Bluetooth device compatibility
Bug fixed/Repair:
⁃ solve the king glory pull down the status bar will stop the operation of the problem
⁃ solve the problem of nail the front camera to take pictures
Source - h2os.com/download
OP3- http://download.h2os.com/oneplus3/P...6_OTA_022_all_1706272151_0da875d901b04b85.zip
OP3T- http://download.h2os.com/oneplus3/P...6_OTA_022_all_1706272151_0da875d901b04b85.zip
Click to expand...
Click to collapse
Edit 3t link.
It's same as 3
Nice job. Works fine.
I dirty flash H2os on top of Oos ob18. After first reboot reflash the twrp recovery 3.1.1.28 by eng-stk.
Magisk v.13 beta works for me.
Can anyone tell me which Sound mod you are using ? I'm flashing Viper4Arise, but it doesnt work :/ No sound effect or anything :/
Is It possible another mirror link ? Ive downloaded two time but file is corrupt
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
New launcher feature
SpartaKurd said:
Can anyone tell me which Sound mod you are using ? I'm flashing Viper4Arise, but it doesnt work :/ No sound effect or anything :/
Click to expand...
Click to collapse
i flashed devine beats 9.0 and its working fine for me.
https://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
I'm getting better battery life with this rom than on OOS. not the greatest of SOT but on stock OOS I'm getting close to 4hrs and with hydrogen I'm getting close to 5hrs. no tweaks.
could you please share link for google installer APK
sivajithee said:
could you please share link for google installer APK
Click to expand...
Click to collapse
I flashed oos beta 18 go through the setup wizard signed into my Google account then dirty flash hydrogen.
Someone else made mention of this method on the 1st page I think.
But here's the link for the app https://drive.google.com/file/d/0B_sB5YHbTptcVEdlSFNuLWhUV3M/view?usp=drivesdk
I was on ob18. Used for couple of days. Then i dirty flash H2o. Everything works. No conflict with any google apps.
null0seven said:
I was on ob18. Used for couple of days. Then i dirty flash H2o. Everything works. No conflict with any google apps.
Click to expand...
Click to collapse
Do you have the download "app" in the app drawer? I clean installed H2OS OB 16 and dont have it. Have to access only trough File manager, also, Do you have some chinese characters at Carrier information?
(to access go to cellular data on the quick bar -> more settings -> billing cicle -> carrier information)
Greetings
SpartaKurd said:
Can anyone tell me which Sound mod you are using ? I'm flashing Viper4Arise, but it doesnt work :/ No sound effect or anything :/
Click to expand...
Click to collapse
You must be set selinux to permissive to work viper
Sent from my ONEPLUS A3003 using Tapatalk
niko.gtan said:
Do you have the download "app" in the app drawer? I clean installed H2OS OB 16 and dont have it. Have to access only trough File manager, also, Do you have some chinese characters at Carrier information?
(to access go to cellular data on the quick bar -> more settings -> billing cicle -> carrier information)
Greetings
Click to expand...
Click to collapse
download app in the app drawer ? Never used. I download roms, kernels, recoverys on my laptop.
carrier info? Both options in there are only chinese
I was on ob18. All phone, apps was set up for me. I just dirty flash H2o. I got a few chinese app i can't uninstal. I got root. I disabled them.
Guys I flashed this over Beta18 and lost access to recovery. These are the steps I followed, please help.
1. Backup current ROM (OB18)
2. Dirty Flash New H2OS version
3. Flash recovery image again
4. Reboot system
ROM booted without any problems and all my data is present but I lost access to TWRP.
Solution attempted: Reboot to fastboot and flash recovery image again, the process is successful but still TWRP is not coming up.
Please help. Thanks in advance
franky14 said:
Guys I flashed this over Beta18 and lost access to recovery. These are the steps I followed, please help.
1. Backup current ROM (OB18)
2. Dirty Flash New H2OS version
3. Flash recovery image again
4. Reboot system
ROM booted without any problems and all my data is present but I lost access to TWRP.
Solution attempted: Reboot to fastboot and flash recovery image again, the process is successful but still TWRP is not coming up.
Please help. Thanks in advance
Click to expand...
Click to collapse
Same lost recovery. Have already used H2OS never lost it. Tried flashing recovery through fastboot. Still TWRP is not opening
Somehow managed to flash the twrp using all in one tool. Yet while the twrp boots it asks for the passwrod for encryption. Usually the lockscreen password will be accepted there. But now its not accepting the lockscreen password nor the "default_password" And if i cancel it and reboot to system, it boots to H2OS. But when i try to boot into recovery am reverted back to stock oneplus recovery. Any Solutions ????
I recovered from this situation, steps I took were
1. Reboot to bootloader
2. Flash recovery via fastboot
3. Reboot to recovery (Important)
4. It should reboot to TWRP now
5. Reboot system
You should have recovery. Stock Recovery.
The best way to flash recovery it's to reboot to Bootloader/Fasboot. Flash recovery from PC with ADB. Reboot to Bootloader. Reboot to recovery.
Other ways, are with Flashify or with TWRP.
I found some screen animations that I thought I would share. Originally posted in an aroma installer by stangdriver44. For more detailed information, please visit the link to his thread below. I don't have any gifs or shots of the Animations so if you want to know what they are like, you'll have to visit his thread.
https://forum.xda-developers.com/android/themes/aroma-ozop-mods-animations-8-5-add-ons-t3651748
There are four full animations
Flyme - iOS - MissingLink - Nexus 7
And five add-on Dialog animations
Bounce - Drop - FlipMix - fold - slide
Unzip the ADB installer onto your PC. Run either the bat file, (animinstaller.bat) or if you prefer, the powershell file (one for linux, one for windows).
If you want to mix the full animations with different dialog add-on animations, install the full animation first, then the add-on. When done select "Build the module" option. Flash the mymagiskanimation.zip that is created in a folder called ozop on your sdcard (via Magisk manager).
ADB Installer
https://www.androidfilehost.com/?fid=10763459528675565017