Database Develop

Unable to get S-off - HBOOT 1.54 - rumrunner

Hey I was hoping that someone here would be able to help.
Ive been trying for get s-off on my device, I have tried everything but it dosent wnat to work. I am probably missing something basic.
I have a GPE HTC one that I until recently used with RevolutionHD 30 (Sense version).
Now that 4.4 is out I want to flash that, but every rom seems to require s-off.
Being that my Hboot version is 1.54, i understand that my only option to s-off is using rumrunner.
I have tried to rumrunner a number of times:
Using a windows machine
Using a Linux machine
I have tried both wirh the following roms: CM 10.2, CM 11, ADR 30
But I cant seem to have any luck. On both machines I alwasy get stuck at the same place:
HTML:
Please wait....
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (17/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[************************************************************]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
I dont know if it helps but "fastboot getvar mainver" alwasy rettuns blank.
I tried to log onto the rumrunner irc, but it looks to be empty.
Is their anything that I can do?

Please tell me your cid and your model id and I 'll guide you
Sent from my HTC One using Tapatalk

Thanks,
Cid num: GOOGL001
Model id: PN0712000
Just in case fastboot getvar all output:
HTML:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36JW913072
(bootloader) imei: *******************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4313mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.048s

AmirH said:
Hey I was hoping that someone here would be able to help.
Ive been trying for get s-off on my device, I have tried everything but it dosent wnat to work. I am probably missing something basic.
I have a GPE HTC one that I until recently used with RevolutionHD 30 (Sense version).
Now that 4.4 is out I want to flash that, but every rom seems to require s-off.
Being that my Hboot version is 1.54, i understand that my only option to s-off is using rumrunner.
I have tried to rumrunner a number of times:
Using a windows machine
Using a Linux machine
I have tried both wirh the following roms: CM 10.2, CM 11, ADR 30
But I cant seem to have any luck. On both machines I alwasy get stuck at the same place:
HTML:
Please wait....
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Test 2: Booting device
Waiting for ADB (17/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[************************************************************]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
FATAL: Download updated package at www.rumrunner.us
I dont know if it helps but "fastboot getvar mainver" alwasy rettuns blank.
I tried to log onto the rumrunner irc, but it looks to be empty.
Is their anything that I can do?
Click to expand...
Click to collapse
Since your hboot is 1.54 use Guru Reset: 2.24.xxx.x, such as: http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/ (if this doesnt work try a different 2.24 version)
in installer, select ROOT, and unselect "stock recovery", then give rumrunner a chance

nkk71 said:
Since your hboot is 1.54 use Guru Reset: 2.24.xxx.x, such as: http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/ (if this doesnt work try a different 2.24 version)
in installer, select ROOT, and unselect "stock recovery", then give rumrunner a chance
Click to expand...
Click to collapse
Although not mentiond I also tried with "Guru Reset M7 3.63.707.4" maybe the version number that I tried wasnt good.
The download is on the way and I will try it then.
This wont cause any problems with the touch issues correct? I dont not have a OTG cable.

Or follow this guide http://forum.xda-developers.com/showthread.php?t=2358781 to flash the 4.4 Google edition RUU and be completely stock. Then your main version won't be blank, and can try to get s-off
Sent from my HTC One using Tapatalk

Ivanovic said:
Or follow this guide http://forum.xda-developers.com/showthread.php?t=2358781 to flash the 4.4 Google edition RUU and be completely stock. Then your main version won't be blank, and can try to get s-off
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
That was one of the posts that I was looking at but then i saw this
HTML:
Prerequisites
S-Off,
ADB knowledge
Fastboot knowledge
Should I not be worried about that?

I thought about that but you already have the correct CID and MID. I believe it will flash just fine
Sent from my HTC One using Tapatalk

Sounds reasonable ... I will update once finished.

AmirH said:
Sounds reasonable ... I will update once finished.
Click to expand...
Click to collapse
why not try s-off with 2.24 rom, and if that doesnt work you can always try the second method. once you upgrade you can no longer downgrade with S-On.

nkk71 said:
why not try s-off with 2.24 rom, and if that doesnt work you can always try the second method. once you upgrade you can no longer downgrade with S-On.
Click to expand...
Click to collapse
Thats what I plan to do.. Im downloading both roms at the same time.
Once they are finished and I have gotten a chance to play around with them, I will update.
I do hope that one of the methods work.

OK so both methods failed, maybe I'm doing something wrong...
First:
The real reason that I wanted s-off was because I wanted to install 4.4 so i decided to try with the RUU.
I tried with a locked and unlocked boot loader. the errors i got were;
1. FAILED (remote: 12 signature verify fail)
2. FAILED (remote: 99 unknown fail)
Then I went with the GURU method...
I installed the Rom, flashed stock recovery, and added root (Bootloader still unlocked).
1. Setup my HTC
2. Allowed USB debugging
3. turned fast boot off
4. Tried to run the rumrunner again (Am I missing a step here?!?)
Still get the rumrunner error.
Im not sure if its relevent, but I get this when trying to lock and unlock the bootloader:
HTML:
fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 1.189s
And
HTML:
fastboot oem unlock
...
(bootloader) Erasing userdata...
(bootloader) eMMC Manufacturer ID: 15
(bootloader) Start Verify: 3
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 10.802s
Does this tell you guys anything?

Check your drivers.. ? or install HTC Naked drivers.

SaHiLzZ said:
Check your drivers.. ? or install HTC Naked drivers.
Click to expand...
Click to collapse
Based on what part are you saying that?
Should I update the drivers and try to install RUU
or install and try to lock/unlock the bootloader.
ADB and fastboot do work just fine.
As for the rumrunner it was ran on a Unix machine. So the drivers shouldn't be an issue.

As an added suggestion, perhaps the drivers are not interacting properly to give those messages. Haven't seen those before. http://forum.xda-developers.com/showthread.php?t=2139767
(bootloader) Erasing userdata...
(bootloader) eMMC Manufacturer ID: 15
(bootloader) Start Verify: 3
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.

AmirH said:
OK so both methods failed, maybe I'm doing something wrong...
First:
The real reason that I wanted s-off was because I wanted to install 4.4 so i decided to try with the RUU.
I tried with a locked and unlocked boot loader. the errors i got were;
1. FAILED (remote: 12 signature verify fail)
2. FAILED (remote: 99 unknown fail)
Then I went with the GURU method...
I installed the Rom, flashed stock recovery, and added root (Bootloader still unlocked).
1. Setup my HTC
2. Allowed USB debugging
3. turned fast boot off
4. Tried to run the rumrunner again (Am I missing a step here?!?)
Still get the rumrunner error.
Im not sure if its relevent, but I get this when trying to lock and unlock the bootloader:
HTML:
fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 1.189s
And
HTML:
fastboot oem unlock
...
(bootloader) Erasing userdata...
(bootloader) eMMC Manufacturer ID: 15
(bootloader) Start Verify: 3
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 10.802s
Does this tell you guys anything?
Click to expand...
Click to collapse
I didnt know that "fastboot oem unlock" works with the M7, but maybe it does with the GPe
have you checked the rumrunner thread? recommend you head over there and see if you get some help. i'm not familiar enough with GPe to be able to guide you properly. sorry

I cant believe I cant get this too work... after a little investigation, I'm starting to think that it might have something to do with the fact that
"fastboot getvar mainver" returns "mainver: "
I cant even flash a stock RUU
Edit:
Updated my mainver using this tool:
http://forum.xda-developers.com/showthread.php?t=2344671
still no help

[Q] Help! Phone bricked, TWRP won't start :(

I upgraded the firmware on the HTC One (AT&T Branded). In order to do that, I had to relock the bootloader and flash firmware.zip using fastboot. I did have a proper Nandroid backup from TWRP before doing this.. Now the phone is bricked, and TWRP does not start for some reason...
I can't flash TWRP again because the bootloaded is relocked.. And when I request the bootloader unlock key from htcdev.com, I get an error
Error Code: 173.
Error Reason: Check Rule Fail with exception.
Is there any way I can get around this?

Quick update - @HTCDev came back and told me that their unlock service was down. They fixed it now and I was able to download the unlock code file.
HOWEVER, when I go to fastboot and try to flash it, nothing happens on the device (the status still shows relocked) even though fastboot says that the command succeeded..
C:\Users\walletless\Desktop\One_All-In-One_Kit_v\Data>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.156s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.167s
I also tried "fastboot reboot-bootloader" after this and it still shows status as relocked. I am on hboot 1.56 and supercid if it matters.
Anyone has suggestions?

fastboot getvar all shows:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: (delete)
(bootloader) imei: (delete)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4259mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.095s

Also tried fastboot erase cache.. Command completed successfully but still cannot boot into recovery
Next try would be ruu... any idea which RUU I should try?
I cant use guru reset since booting into recovery does not work (I get a screen with a red triangle and exclamation when I attempt to boot to recovery)

Finally, found a solution. Phew!
Just flashed an older firmware (http://arhd.onedroid.net/db_mirror/Firmware/HTC/HTC_One/401/3.62.401.1.zip) and I am able to boot into android now...

You shouldn't need to lock the bootloader to flash firmware. Anyway, you erased your custom recovery when you flashed that firmware. Re-flash TWRP again. Make sure you have the same version as you did before so you can restore your nandroid. Did you get your bootloader unlocked?
BTW, I'd advise that you delete the Serial and imei numbers from your getvar readout in your post.
Edit: Too slow to post again, glad your device working. Still should delete those numbers.

farang4u said:
You shouldn't need to lock the bootloader to flash firmware. Anyway, you erased your custom recovery when you flashed that firmware. Re-flash TWRP again. Make sure you have the same version as you did before so you can restore your nandroid. Did you get your bootloader unlocked?
BTW, I'd advise that you delete the Serial and imei numbers from your getvar readout in your post.
Edit: Too slow to post again, glad your device working. Still should delete those numbers.
Click to expand...
Click to collapse
I cant reflash anything for some reason.. the bootloader remains in "relocked" state even after I flash unlockcode..
Immediately after flashing unlockcode, my command window shows:
Code:
> fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.156s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.006s]
finished. total time: 0.165s
And the phone freezes on the fastboot screen - does not respond to any button presses, etc..

Finally got everything!!
Managed to unlock bootloader again using revone (./revone -u) and also removed the tamper flag using the -t switch.. flashed twrp and all is good again!!
Thanks....!

walletless said:
Finally got everything!!
Managed to unlock bootloader again using revone (./revone -u) and also removed the tamper flag using the -t switch.. flashed twrp and all is good again!!
Thanks....!
Click to expand...
Click to collapse
for future the best way to reclock and unlock boot loader if you are stuck is to flash any gpe firmware and simply run this command fastboot oem unlock voila it will be unlocked.

gunswordx said:
for future the best way to reclock and unlock boot loader if you are stuck is to flash any gpe firmware and simply run this command fastboot oem unlock voila it will be unlocked.
Click to expand...
Click to collapse
Thanks. I had tried that but it error'd out as well
btw, sorry I am not very good with acronyms.. what does "gpe firmware" mean?
Sent from my SGH-I337 using xda app-developers app

walletless said:
Thanks. I had tried that but it error'd out as well
btw, sorry I am not very good with acronyms.. what does "gpe firmware" mean?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
gpe is the google edition firmware not having sense

gunswordx said:
gpe is the google edition firmware not having sense
Click to expand...
Click to collapse
Ah ok, that I did not try. Thanks for the tip!
Anyway, phone is up and running well now.. Rocking Android RevolutionHD 40.2

[Q] Help! No radios installed at all

I mistakenly wiped the htc one m7 trying to install a rom based off kit kat I believe. Well, now I have no radios listed at all on the boot screen. I followed the tutorial on the forum for using fast boot to reflash the boot I believe. Process involved an older boot, which didn't flash with an error. I successfully flashed the latest 4.06 version of boot which was successful.
The thread went on to say I should start with the stock rom. Couldn't get it to load with adb side loader or fast boot flash zip name.zip. I have been able to successfully side load viper one, the latest version, and I have the latest version of terp as the recovery.
My problem is the phone will stay on no more than 15 sec. Before it reboots. I cannot see it in my computer although it shows up in device manager. I installed the latest driver from a thread on here.
Seems my options are fast boot and side loader, but I get a signed verification fail when I try to fast boot the radio , also taken from a radio thread here. I'm pretty sure I need s off which is the only thing left. Would this cause the phone to reboot continuously?
I'm tired of messing with it is it time to trash it or is this fixable? Thanks in advance and I'll give any info you guys need to help.

Latest Sprint Radio

from fastboot getvar
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3C4S903734
(bootloader) imei: 990004288501756
(bootloader) meid: 99000428850175
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3796mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>
I dont know if this helps or not.

This is what I get from fastboot when I try to load the radio...
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>fastboot flash radio Rad
io_HTC.zip
sending 'radio' (18554 KB)...
OKAY [ 2.250s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 5.500s
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>
This is where I was last night. After searching on the threads, it seems that flashing hboot is ok, but the radios cannot be flashed without S-OFF. At this point what are my options as far as getting this radio in.
It did this auto reboot every 10-15 sec. the minute i flashed the improper rom. Again I've tried fixing with thread guidance on here for softbricking a Sprint device by flashing an ATT, etc. device.
Please help. Are there people you can call to undo damage like this or are you stuck fixing yourself?
Thanks

tpan1983 said:
This is what I get from fastboot when I try to load the radio...
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>fastboot flash radio Rad
io_HTC.zip
sending 'radio' (18554 KB)...
OKAY [ 2.250s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 5.500s
C:\Users\Tai\Desktop\HTC One Backup\Restore Data\Others>
This is where I was last night. After searching on the threads, it seems that flashing hboot is ok, but the radios cannot be flashed without S-OFF. At this point what are my options as far as getting this radio in.
It did this auto reboot every 10-15 sec. the minute i flashed the improper rom. Again I've tried fixing with thread guidance on here for softbricking a Sprint device by flashing an ATT, etc. device.
Please help. Are there people you can call to undo damage like this or are you stuck fixing yourself?
Thanks
Click to expand...
Click to collapse
if you are using fastboot the radio has to be an image file, not a zip, or a boot.img, or get a radio zip file and flash from recovery.

54594563 3255
Aldo101t said:
if you are using fastboot the radio has to be an image file, not a zip, or a boot.img, or get a radio zip file and flash from recovery.
Click to expand...
Click to collapse
Woops typo. So, what I was doing was opening the .zip, and there are two files. A .inf I believe, and the image file (which Windows recognizes as such). I'm copying and pasting this file in the folder with the tools and fastbooting the .img with the command
fastboot devices
I see the phone serial and fastboot
fastboot flash radio radio.img
I get the error I posted before...
I would like to explore flashing from recovery. Given my situation is this possible? Also, do the stock ROMs, the RUU I believe, does it have the radio installed?

The link BD Posted here are flashable zips for recovery install
Sent from my HTCONE using Tapatalk

MODS PLease delete

MODS PLEASE DELETE , cant find solution , thanks anyway
Im a dare to start my own thread to see if i can solve my problem, anyway, i own a xt1063 in wich i unlocked the bootloader in order to install lollipop and root, i have done this in the past with 3 xt1064's with no problem, however im facing a weird problem this time. So after i installed lollipop rom RETUGLB_XT1063_5.0.2_LXB22.46-28_cid9_CFC.xml via fasboot,everything went smooth as always, the phone boots up but after the world and blue m animation the phone goes into a blank (or black) screen and stays there and it goes no further than that, ive waited 20 plus minutes and nothing happens,i know the phone is on because i can see the screen its a bit bright but black, so i went to the original recovery and did a factory reset wich went nice, reboot and same result, so i instaled twrp via the Moto-G-2014-ToolKit-stable i found here, and booted the twrp recovery, wiped davilk cache,cache and after rebooting i got the same result. One thing i notice is, if i want to erase cache via stock recovery, the phone reboots inmediatly as if something went wrong, i twrp i get an error, trying to install the titan rom [ROM][5.0.2][titan][XT1063/64]The Titan Prime ROM[FEB 1](Version 1.1.2 RC) gives me a bunch of errors and nothing happens. Other thing i notice is that if i boot in twrp and mount the usb storage, i get terrible transfer rate speed, also if i copy something,lets say a rom, i can install such rom but once i restart and boot into twrp and mount the usb again, is like nothing was transfered, thres no rom in there, like if it wipes it self . Dont know what ealse to do, wonder if the cache partition its corrupted and dosnt let the phone fully start. Thanks for any help provided, and pardon my bad grammar, english its my second lenguage...
edited to add more details:
Everytime i try to lock the bootloader i get diferent mesages, but it nevers locks the bootloader.
or if i run the boot logo fix, the tool succesfully does the job as i can tell in the command window, but when i reboot i still get the warning logo as if nothing happened.
Click to expand...
Click to collapse

anyone please? im running out of ideas, thanks.

update 2 just in case someone wants to help, i instaled kk 4.4.4 with titan flasher, then instaled twrp, tried to instal any rom in twrp gets stuck in format system partition....

Have you tried to flash any stock firmware with fastboot?

dpdp73 said:
Have you tried to flash any stock firmware with fastboot?
Click to expand...
Click to collapse
Yes, kk 4.4.4 or lollipop 5.0.2 , no go , both gave the same result.

I wonder if theres a way to install a rom,at the same time wipe all the estructure inside the phone, can that be achieved via adb perhaps? as fastboot seems a bit limited. anyway heres a video that shows how the phone boots to a blank screen on a clean fasboot instaled 5.0.2 stock rom www.youtube.com/watch?v=D8CgqNOp-_g
and this is what happens if i try to clean cache with recovery
www.youtube.com/watch?v=oBivRORNH1I

Try things like "fastboot erase cache", "fastboot erase data(/system etc.)".
But it doesn't look good.

dpdp73 said:
Try things like "fastboot erase cache", "fastboot erase data(/system etc.)".
But it doesn't look good.
Click to expand...
Click to collapse
tried too,was a no go.... dont no what ealse to try, i pretty much done everything

another update while someone steps up and helps.
My phone looks like its write protected, but i can install any recovery i want and boot it. so if i install twrp i can boot to it, if i mount the usb system i can copy files to it, but as soon as i reboot, the files get deleted by magic... so next thing i tried, install stock kk 4 or lollipop via stock recover and sideload adb, i get a fingerprint error message, package expects build fingerprint of motorola/titan_retuglb/titan_umts:4.4.4/KXB/21.85-17/14:user/release , but after that i flashed KK rom via fastboot, all goes well , so i reboot and start recovery and tried to install lollipop via adb side load and i get a fingerprint message again, and dont mater how many roms i flash via fasboot and they look like they installed ok, if i restart stock recovery and try to update with any rom , i get this message,
package expects build fingerprint of motorola/titan_retuglb/titan_umts:4.4.4/KXB/21.85-17/14:user/release-keys or motorola/titan_retuglb/titan_umts:5.0/LXB22.39-6/6:user/release-keys; this device has motorola/titan_retuglb/titan_umts:4.4.4/KXB23/25:u
instalation aborted.
even after flashing lollipop, system says device has KK ,wich lead me to think its been wirte protected.
will keep looking and hope for some smart help, thanks.

please help anyone
Code:
C:\mfastboot-v2>fastboot getvar all > command.txt
(bootloader) version: 0.5
(bootloader) version-bootloader: 4807(*)
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8400
(bootloader) radio: 0x1
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: ZX1D3239LM
(bootloader) cid: 0x0009
(bootloader) channelid: 0x8d
(bootloader) uid: D59CBB060F000000000000000000
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 359297052588158
(bootloader) meid:
(bootloader) date: 10-23-2014
(bootloader) sku: XT1063
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 2 3:44:40 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retuglb/titan_umts:
(bootloader) ro.build.fingerprint[1]: 4.4.4/KXB21.85-23/21:user/release-
(bootloader) ro.build.fingerprint[2]: keys
(bootloader) ro.build.version.full[0]: Blur_Version.21.11.23.titan_retug
(bootloader) ro.build.version.full[1]: lb.retuglb.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g668a77b ([email protected]
(bootloader) kernel.version[1]: ilclbld53) (gcc version 4.7 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Aug 26 20:21:50 CDT 2014
(bootloader) sdi.git: git=MBM-NG-V48.07-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.07-0-g683cb0c
(bootloader) rpm.git: git=MBM-NG-V48.07-0-g71b1aae-dirty
(bootloader) tz.git: git=MBM-NG-V48.07-0-ga27c415
(bootloader) aboot.git: git=MBM-NG-V48.07-0-ge875a20
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1D3239LM
(bootloader) sutinfo:
all: listed above
finished. total time: 0.088s

I have the exact same problem

xGiorgos said:
I have the exact same problem
Click to expand...
Click to collapse
come here and fight with us http://forum.xda-developers.com/moto-g-2014/help/phone-write-protected-freezed-t3030812

Motorola Moto G (XT1068) - Softbricked?

Hi.
I have black screen after motorola moto g animation (I can see some light, but blank screen).
I can enter on fastboot mode and have the bootloader unlocked. . I tried to reflash the firmware but i have still the same error.
I tried to downgrade from 5.0.2 to 4.4.4 but I can't do it, it displays this error:
"C:\A>mfastboot.exe flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (2184 KB)...
OKAY [ 0.160s]
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.472s"
I tried a lot of procedures searching my problem in google, but noone works.
Maybe is a wrong firmware image? can you help me with the correct image or solving the issue?
I'm desperate and need a solution, here you can see some information:
"C:\A>mfastboot.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 4882(*)
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8400
(bootloader) radio: 0x5
(bootloader) emmc: 8GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) ram: 1024MB Hynix S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8226 CS
(bootloader) serialno: ZX1D22PPCL
(bootloader) cid: 0x0007
(bootloader) channelid: 0x40
(bootloader) uid: C26F6D070F000000000000000000
(bootloader) securestate: unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: XXXXXXXXXXX
(bootloader) meid:
(bootloader) date: 12-13-2014
(bootloader) sku: XT1068
(bootloader) battid: (null)
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jul 14 15:45:22 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retaildsds/titan_um
(bootloader) ro.build.fingerprint[1]: tsds:5.0.2/LXB22.46-28/28:user/rel
(bootloader) ro.build.fingerprint[2]: ease-keys
(bootloader) ro.build.version.full[0]: Blur_Version.22.21.28.titan_retai
(bootloader) ro.build.version.full[1]: ldsds.retaildsdsall.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g48d3b85 ([email protected]
(bootloader) kernel.version[1]: ilclbld54) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Jan 6 10:38:33 CST 2015
(bootloader) sdi.git: git=MBM-NG-V48.82-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.82-0-g7e74e90
(bootloader) rpm.git: git=MBM-NG-V48.82-0-g20516c3-dirty
(bootloader) tz.git: git=MBM-NG-V48.82-0-g72f9f12
(bootloader) aboot.git: git=MBM-NG-V48.82-0-ge004609
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 0/0
(bootloader) productid: ZX1D22PPCL
(bootloader) sutinfo:
(bootloader) ro.carrier: reteu
all: listed above
finished. total time: 0.101s"
Very thanks guys. :crying:

If you are trying to downgrade from 5.x/6.x to 4.4, remember you do not flash .mbn file. Flashing .mbn will attempt to downgrade your bootloader and might corrupt it, as bootloader downgrade is not supported/advised. I suggest you flash 5.x stock firmware WITH .mbn file and this should solve your problem.
Try firmware from this thread:
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-original-motorola-t3155774

just try to flash a recovery like twrp then install cm like rom first

pank.dhnd said:
If you are trying to downgrade from 5.x/6.x to 4.4, remember you do not flash .mbn file. Flashing .mbn will attempt to downgrade your bootloader and might corrupt it, as bootloader downgrade is not supported/advised. I suggest you flash 5.x stock firmware WITH .mbn file and this should solve your problem.
Try firmware from this thread:
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-original-motorola-t3155774
Click to expand...
Click to collapse
What image should I use for XT1068 Europe Dual Sim ??? in relation with the fastboot vars?

When i Install twrp it won't display errors, but when i access to recovery it access to the stock recovery :/
If I manually boot from twrp whitout flashing it, i get stuck on "teamwin" logo.
vaisakmct said:
just try to flash a recovery like twrp then install cm like rom first
Click to expand...
Click to collapse

lsard said:
When i Install twrp it won't display errors, but when i access to recovery it access to the stock recovery :/
If I manually boot from twrp whitout flashing it, i get stuck on "teamwin" logo.
Click to expand...
Click to collapse
That's what I am saying, flash stock Lollipop, it will restore your bootloader and recovery (if any changes were made during downgrade), and then flash recovery.
---------- Post added at 05:46 AM ---------- Previous post was at 05:37 AM ----------
lsard said:
What image should I use for XT1068 Europe Dual Sim ??? in relation with the fastboot vars?
Click to expand...
Click to collapse
Ohh, for Europe dual sim, you can use image from below thread:
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
The thread I posted earlier has Indian images mostly, but it won't make much difference.

pank.dhnd said:
That's what I am saying, flash stock Lollipop, it will restore your bootloader and recovery (if any changes were made during downgrade), and then flash recovery.
---------- Post added at 05:46 AM ---------- Previous post was at 05:37 AM ----------
Ohh, for Europe dual sim, you can use image from below thread:
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
The thread I posted earlier has Indian images mostly, but it won't make much difference.
Click to expand...
Click to collapse
Still the same error, blank screen after motorola animation, reflashing this firmware -> ***NEW*** DOWNLOAD XT1068 5.0.2 LXB22.99-16.3 RETDSDS WITH STAGE FRIGHT FIX RETAIL DUAL SIM DUAL STANDBY (EU/INDIAN/GLOBAL) 26/08/2015 BUILD ***NEW***

Nobody can help me?
Do you think my phone is not recoverable?
:crying:

lsard said:
Nobody can help me?
Do you think my phone is not recoverable?
:crying:
Click to expand...
Click to collapse
Did u try any custom ROM?
And don't worry, your phone boots perfectly that means no issue with it.

pank.dhnd said:
Did u try any custom ROM?
And don't worry, your phone boots perfectly that means no issue with it.
Click to expand...
Click to collapse
I can't install any ROM, I tried to install cm rom by adb but it fails at the installation process. Can't install neither any recovery.
I think is a blocked partition or something like this.

Please help me solving this.... nobody know why I can't install any rom/recovery?

lsard said:
Please help me solving this.... nobody know why I can't install any rom/recovery?
Click to expand...
Click to collapse
You can try to boot into twrp, you have to use the 2.8.5.0 version, newer ones will fail.
Sent from my Moto G 2014 using XDA Free mobile app

Wolfcity said:
You can try to boot into twrp, you have to use the 2.8.5.0 version, newer ones will fail.
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
Hi Wolfcity, thanks for your support.
I installed twrp 2.8.5.0 version as you told me. I'm still with the same problem. When I installer the twrp recovery it will boot from stock recovery. If I manually boot from trwp it will stuck on the Teawin logo.
I installed this iso -> https://dl.twrp.me/titan/twrp-2.8.5.0-titan.img
I'm desperate

You say your bootloader is possibly corrupt, that would be a result of a bad mbn flash in your phones bootloader. Explain to me exactly how you performed the .mbn flashing process so I may formulate a solution. Thanks

GhettoButta said:
You say your bootloader is possibly corrupt, that would be a result of a bad mbn flash in your phones bootloader. Explain to me exactly how you performed the .mbn flashing process so I may formulate a solution. Thanks
Click to expand...
Click to collapse
I tried various processes searching by google, but the last i think was following this thread:
http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
Thanks you so much, I can post you all the fastboot vars if you need.

You say your bootloader is possibly corrupt, that would be a result of a bad mbn flash in your phones bootloader. Explain to me exactly how you performed the .mbn flashing process so I may formulate a solution. Thanks
EDIT: Also list your previous motoboot.img version you used for the flashing process.
Tell me your carrier?

http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-5-0-2-lxb22-46-t3019612
go here may be this post will help you for your issue .

GhettoButta said:
You say your bootloader is possibly corrupt, that would be a result of a bad mbn flash in your phones bootloader. Explain to me exactly how you performed the .mbn flashing process so I may formulate a solution. Thanks
EDIT: Also list your previous motoboot.img version you used for the flashing process.
Tell me your carrier?
Click to expand...
Click to collapse
I tried so many proceduress..
I used this posts:
- http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
- http://forum.xda-developers.com/moto-g-2014/development/rom-stock-lollipop-rom-t3024800
- http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
Maybe is not the order... i tried like 4 or 5 reflash to stock but nothing changes, i'm getting the exact same error.
Thanks

Can't believe it can't be solved!!
I have a great commitment with this smartphone

go to service center dont mention about ur bootloader unlocked just told them u face this screen at the time of update .dont touch anything else just submit your handset