Related
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
LennartL said:
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
Click to expand...
Click to collapse
You can flash it using modded or patched ODIN to the U1 non-carrier firmware to get rid of the T-Mobile boot animation. It will also remove the T-Mobile video calling dialer though but WiFi Calling will still work.
What he said^^^ flash the U1 firmware. Note your device will be wiped.
Sent from my SM-N960F using Tapatalk
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
LennartL said:
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
Click to expand...
Click to collapse
Do not use the one labeled TMB U1. That firmware isn't official and could potentially break OTA's. You want to use the U1 XAA with the same version or newer bootloader than what your device currently has. The the first character of the last five characters of the build number contains your bootloader version. I don't believe the Note 9 has a v2 bootloader yet, but I have only really followed ATT U firmware, U1 firmware, and TMB U firmware. When you flash, do not use the HOME_CSC! remember your device will be wiped and factor reset so back up what you want before starting.
I'm running the TMB U1 firmware. No bloat or boot screens and I get OTAs around the same time as the U t mobile devices. I honestly dont see a real difference from the XAA u1 vs the TMB U1 firmware to be honest
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
LennartL said:
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
Click to expand...
Click to collapse
The non-branded firmware is the U1. The reason the modded or patched ODIN is needed is to skip the check that you are flashing the same carrier firmware. The hardware for the US and Canadian models are exactly the same. The firmware on Sansung's page isn't meant for flashing in ODIN.
Although I have only seen one user experience issues with the TMB U1, which for some reason, gave him a modded software warning when they tried to check for updates. I would stick to using the actual non-carrier specific firmware, which has T-Mobile's WiFi Calling and still has band 71 enabled.
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
LennartL said:
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
Click to expand...
Click to collapse
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
LennartL said:
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
Click to expand...
Click to collapse
That's correct! The U1 non-carrier firmware is like a stepping stone, If you want to move from one U firmware to one from a different carrier, you need to flash to U1 first and always make sure you never use the HOME_CSC. The HOME_CSC doesn't wipe the device, which can cause a number of issues when converting. Being on the U1 though, makes it very easy to go back to any U firmware because you are already at the point where you could just straight flash to any U or W firmware as long as the bootloader version is the same or newer than what your device has at that time.
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
LennartL said:
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
Click to expand...
Click to collapse
The HOME_CSC prevents wiping while flashing. If you skip the wiping part, you risk having no data, no potential cellular connectivity, no different unlocked bands for the firmware you are flashing to, etc. You pretty much put yourself in a position where you have to flash again, but actually use the other CSC to ensure your device works properly.
Any unlocked USA note 9s willing to upload there modem files somewhere wanna try and make a sim unlock
Help on Flashing Tmobile firmware on Unlocked Note 9
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
lguti46 said:
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
Click to expand...
Click to collapse
Yes you can. Use ODIN to flash the T-Mobile firmware. It's that simple. You don't need an unlocked bootloader or root. No it won't trigger Knox.
If you need detailed instructions, they have been posted in some of the firmware threads here, o you can go to the Note 8 forums and read through the carrier switching thread. Just follow the steps for flashing carrier firmware. The steps are all the same, you just make sure you're using the right firmware for your device.
Thank you so much! I was able to successfully flash to T-Mobile using the forum threads.
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
LennartL said:
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
Click to expand...
Click to collapse
That's because U1 XAA is on ARJ9. There won't be a U1 Firmware with an ARH6 build number.
Hello,
I have a Note 9 N9600 SD845 HongKong Version, I am using Lyca Mobile sim( Tmobile MVNO) with it .
I have gone through this forum and could not figure out if its possible to install the N960U1 firmware on N9600.
If yes, will it activate all the tmobile bands on N9600 ?
I also have a ATT unlocked note 9 N960U, I have flashed it to N960U1 successfully using Odin. Is it the same process for N9600 ?
Thanks in advance
I there, I have the same phone model and the conclusion that I made was that you can't just flash the u1 firmware like how awe are used to. I had to root mine in order to install tmb software. I then had 4g Lte and wifi calling, but before you root look at what you may be missing out on. It is usaully stuff dealing with knox i.e samsung pay, secure folder, etc.
batsup606 said:
I there, I have the same phone model and the conclusion that I made was that you can't just flash the u1 firmware like how awe are used to. I had to root mine in order to install tmb software. I then had 4g Lte and wifi calling, but before you root look at what you may be missing out on. It is usaully stuff dealing with knox i.e samsung pay, secure folder, etc.
Click to expand...
Click to collapse
Thanks for your response
I dont need Samsung Pay but after flashing to u1 would I get OTA updates or every time will have to update manually for the monthly security patches
Funkypoopsy said:
Hello,
I have a Note 9 N9600 SD845 HongKong Version, I am using Lyca Mobile sim( Tmobile MVNO) with it .
I have gone through this forum and could not figure out if its possible to install the N960U1 firmware on N9600.
If yes, will it activate all the tmobile bands on N9600 ?
I also have a ATT unlocked note 9 N960U, I have flashed it to N960U1 successfully using Odin. Is it the same process for N9600 ?
Thanks in advance
Click to expand...
Click to collapse
No
Funkypoopsy said:
Thanks for your response
I dont need Samsung Pay but after flashing to u1 would I get OTA updates or every time will have to update manually for the monthly security patches
Click to expand...
Click to collapse
Unless you flash the official Samsung software using Odin, you will not be able to install OTA updates. But from my understanding you can't flash USA U1 firmware onto the Hong Kong/International N9600 Note 9. The bootloader will only accept firmware for their respective models. All U.S. Note 9's can flash any of the carrier versions or the unlocked U.S. firmware, but you can't flash the international N9600 firmware... and vice versa.
So after a bit of research it looks like it is not possible to flash stock att firmware to the n-960n. Does this sound right. I'm leaving Korea and will be going back to att when I get home.
Noteuser22 said:
So after a bit of research it looks like it is not possible to flash stock att firmware to the n-960n. Does this sound right. I'm leaving Korea and will be going back to att when I get home.
Click to expand...
Click to collapse
Not officially, no. However I don't think samsung pay will work in the US on a Korean Note9 anyway, so if you unlock the bootloader and root you can flash a CSC changer to get all of the ATNT features (including voLTE/voWIFI). You will void your warranty and lose knox/Samsung Pay.
Noteuser22 said:
So after a bit of research it looks like it is not possible to flash stocksevice. att firmware to the n-960n. Does this sound right. I'm leaving Korea and will be going back to att when I get home.
Click to expand...
Click to collapse
you can't flash snapdragon firmware on a exynos device. but regardless, just pop the sim and be happy. no need to change CSC for voice and data.
but if you do root as the suggested then you can get the additional csc features by flashing a csc pack.
bober10113 said:
you can't flash snapdragon firmware on a exynos device. but regardless, just pop the sim and be happy. no need to change CSC for voice and data.
but if you do root as the suggested then you can get the additional csc features by flashing a csc pack.
Click to expand...
Click to collapse
Exactly which CSC pack can I use and where do I get it?
I am in the exact same situation: Korean SM-G960N, rooted, on AT&T's network with Android 9.
Do I extract the CSC from the latest SM-G960U1 file and flash that with Odin? Can I use an Android 10 CSC on an Android 9 phone?
sleepeeg3 said:
Exactly which CSC pack can I use and where do I get it?
I am in the exact same situation: Korean SM-G960N, rooted, on AT&T's network with Android 9.
Do I extract the CSC from the latest SM-G960U1 file and flash that with Odin? Can I use an Android 10 CSC on an Android 9 phone?
Click to expand...
Click to collapse
Are you looking for AT&T specifically? Cause from what I know they don't release them. I used N960U since the 1 is the unlocked version software. Sorry I can't be much help beyond what I know of AT&T files. Best of luck.
macgyver40 said:
Are you looking for AT&T specifically? Cause from what I know they don't release them. I used N960U since the 1 is the unlocked version software. Sorry I can't be much help beyond what I know of AT&T files. Best of luck.
Click to expand...
Click to collapse
Thanks for the respopnse. Well the link from SamMobile has the CSC in it. I tried to flash the HOME_CSC file via Odin and the Odin PrinceComsy version (I don't think this works on Android 8) and it would not flash.
sleepeeg3 said:
Thanks for the respopnse. Well the link from SamMobile has the CSC in it. I tried to flash the HOME_CSC file via Odin and the Odin PrinceComsy version (I don't think this works on Android 8) and it would not flash.
Click to expand...
Click to collapse
The last 2 times I updated I used the Comcast files to update my note9 i got from AT&T i am currently on the newest release this way and everything seems to work at least the limited options I use from AT&T.
I flashed my AT&T S10 SM-G973U to XAA after unlocking to for use on T-Mobile. I can't seem to flash it back to stock, I always get an error usually after abl portion of Odin flashing. I am sure if I am using an incorrect Odin or what. Can some please guide me in the correct direction?
Sent from my SM-G973U using Tapatalk
You mean you want to downgrade?
Actually it's kinda impossible, Samsung forbids flashing firmwares prior to the last security patch, no changes will be made.
I wouldn't say necessarily downgrade, but to flash my phone back to AT&T branded firmware like it was when I got it. I know that when I do a SIM card change yes it does change the firmware and branding but it's still XAA
Sent from my SM-G973U using Tapatalk
sthomps0188 said:
I wouldn't say necessarily downgrade, but to flash my phone back to AT&T branded firmware like it was when I got it. I know that when I do a SIM card change yes it does change the firmware and branding but it's still XAA
Sent from my SM-G973U using Tapatalk
Click to expand...
Click to collapse
you need patched Odin for carrier changing firmware to be flashed. also, you cannot go backwards in bootloader revisions`
youdoofus said:
you need patched Odin for carrier changing firmware to be flashed. also, you cannot go backwards in bootloader revisions`
Click to expand...
Click to collapse
Could you please advise me on what patched Odin version to use and what version of firmware I should use. My baseband Version is G973USQS2BSIX
My bootloader is G973USQS2BSIX
Sent from my SM-G973U using Tapatalk
Google search prince Odin youl find one some where in xda forums
sthomps0188 said:
Could you please advise me on what patched Odin version to use and what version of firmware I should use. My baseband Version is G973USQS2BSIX
My bootloader is G973USQS2BSIX
Sent from my SM-G973U using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
from this thread
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
for what firmware to flash, depends on what carrier crap you want on the phone which is dictated by the csc you flash.
pick your poison
https://www.sammobile.com/samsung/galaxy-s10/firmware/SM-G973U/
sthomps0188 said:
I flashed my AT&T S10 SM-G973U to XAA after unlocking to for use on T-Mobile. I can't seem to flash it back to stock, I always get an error usually after abl portion of Odin flashing. I am sure if I am using an incorrect Odin or what. Can some please guide me in the correct direction?
Sent from my SM-G973U using Tapatalk
Click to expand...
Click to collapse
Did you have any issues changing your AT&T S10 into XAA ? I'm planing to do exact this.
What gets me is, you can't find AT&T firmware anywhere except on shady looking, but legit pay sites so you pay for it when it should be free like all the other carriers firmware.
At & t stuck on android 9!!
Any advice my friends s10 AT & T is stuck on android 9. He's says there's nothing above 9 on Sammy mob. Can he flash from another carrier?
jason13v8 said:
Any advice my friends s10 AT & T is stuck on android 9. He's says there's nothing above 9 on Sammy mob. Can he flash from another carrier?
Click to expand...
Click to collapse
At&t firmware you have to pay for. Yes you can flash another carrier firmware using patched Odin.
You just need to change csc to att which you can do using *#272*IMEI#
No need to flash new firmware
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which I don't think you HAVE to do). Just use frija and download SM-F916W region XAC and use Odin patched. Up and running with no issues.
**updated i actually used model SM-F916W region XAC in Frija.
jcrutchvt10 said:
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which is in common with the Canadian shared CSC). Just use frija and download SM-F916W region XAR and use Odin patched. Up and running with no issues.
Click to expand...
Click to collapse
did you have to wipe your phone? Same on T-Mobile and getting antsy waiting
Is there any drawbacks whatsoever for changing your CSC?
Or let me rephrase, do you still have 5G, Wifi Calling, samsung pay, etc.?
curiousmileo said:
did you have to wipe your phone? Same on T-Mobile and getting antsy waiting
Click to expand...
Click to collapse
I chose to wipe not sure if you must.
abdielol said:
Is there any drawbacks whatsoever for changing your CSC?
Or let me rephrase, do you still have 5G, Wifi Calling, samsung pay, etc.?
Click to expand...
Click to collapse
No drawback at all. Yes I still have all of the above.
jcrutchvt10 said:
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which is in common with the Canadian shared CSC). Just use frija and download SM-F916W region XAR and use Odin patched. Up and running with no issues.
Click to expand...
Click to collapse
Which CSC did you use when searching in Frija? XAR returns no results for the SM-F916W.
XAC?
After looking on Frija I'm seeing XAR is for SM-F916U1 and it's US based Android 10. Not sure how you got Android 11. If you meant XAC there's no option to change the CSC to that.
jcrutchvt10 said:
I'm using an unlocked U1 on T-mobile US and just used the google dialer to switch CSC to XAR (Which is in common with the Canadian shared CSC). Just use frija and download SM-F916W region XAR and use Odin patched. Up and running with no issues.
Click to expand...
Click to collapse
And then did you switch your CSC back to TMB?
abdielol said:
After looking on Frija I'm seeing XAR is for SM-F916U1 and it's US based Android 10. Not sure how you got Android 11. If you meant XAC there's no option to change the CSC to that.
Click to expand...
Click to collapse
GaresTaylan said:
Which CSC did you use when searching in Frija? XAR returns no results for the SM-F916W.
XAC?
Click to expand...
Click to collapse
My apologies i was running on very little sleep. I did indeed use XAC in Frija. So I suppose you could try leaving it on TMB and flashing since i flashed the XAC version for SM-F916W over XAR on my U1. I do have a bunch of extra dev options though that i'm not sure would be exactly the same. I will confirm later but so far, I haven't found a dialer code on XAR that works to change CSC on version CTLL with XAC. But your sim will automatically flip your network CSC to TMB regardless. I'll update my previous posts thanks for the catch.
anuraj1 said:
And then did you switch your CSC back to TMB?
Click to expand...
Click to collapse
Like i mentioned in my post above, so far, I haven't found a dialer code that opens up the CSC menu on the new version. I'm going to try again shortly but your sim will automatically set your network to TMB. I can say that VOLTE and WFC works much more efficiently for me on the new version. You just have to wait for setup to complete and the WFC option will appear as usual.
ODIN allowed you to flash SM-F916W firmware on a SM-F916U1 model? Typically cross flashing between models fails when using ODIN and even if it let you, you'd probably be soft-bricked.
This does work. I have tried it. My fold 2 was bought from Samsung unlocked. It now shows the device as SM-F916W. I am with AT&T and 5g doesn't show up but everything else seems to run just fine.
I was also able to go back to u1 firmware with CSC XAA .
tlbland0426 said:
ODIN allowed you to flash SM-F916W firmware on a SM-F916U1 model? Typically cross flashing between models fails when using ODIN and even if it let you, you'd probably be soft-bricked.
Click to expand...
Click to collapse
Yeah the patched ODIN 3.1.4 did work in this case. I did some checking of the partitioning among various regions/versions and the canadian version didn't really require any changes so i thought i'd take a chance. I do have 5G so that tells me you need to apply sales/network CSC of something that isn't carrier locked prior to updating and everything should work ok. That's speculation and my personal experience.
Test
aj2019 said:
Hey! So, I have SM-F916U. I flashed SM-F916U1 firmware to get rid of the AT&T Bloatware. Everything is working fine but my Samsung Pay shows USA Offers but I live in India.
Going by the same logic as you mentioned, Can I flash CSC of SM-F916B (India Version) to get Samsung Pay Indian Offers?
Click to expand...
Click to collapse
I'd be hesitant to do anything with a non-unlocked variant.
tlbland0426 said:
ODIN allowed you to flash SM-F916W firmware on a SM-F916U1 model? Typically cross flashing between models fails when using ODIN and even if it let you, you'd probably be soft-bricked.
Click to expand...
Click to collapse
This isn't surprising at all. Since the Galaxy S8 and Note 8, the U models and the W models have all been cross compatible with firmware. They are actually the same exact device, and the W only indicates it's running Canadian firmware. Just like the U1 indicates it's non-carrier branded and U indicates it's a carrier model. No issues cross flashing at all.
aj2019 said:
Hey! So, I have SM-F916U. I flashed SM-F916U1 firmware to get rid of the AT&T Bloatware. Everything is working fine but my Samsung Pay shows USA Offers but I live in India.
Going by the same logic as you mentioned, Can I flash CSC of SM-F916B (India Version) to get Samsung Pay Indian Offers?
Click to expand...
Click to collapse
916B and 916U are not the same devices. There are hardware differences, so you can't crossflash firmware.
jcrutchvt10 said:
I'd be hesitant to do anything with a non-unlocked variant.
Click to expand...
Click to collapse
Flashing firmware doesn't do anything to affect the locked or unlocked status. Many, many people here have flashed U1 firmware on locked U devices over the last few years.
Mr. Orange 645 said:
916B and 916U are not the same devices. There are hardware differences, so you can't crossflash firmware.
Flashing firmware doesn't do anything to affect the locked or unlocked status. Many, many people here have flashed U1 firmware on locked U devices over the last few years.
Click to expand...
Click to collapse
Got it! Thankyou so much! So, is there any possible way to get Samsung Pay India app on my US version of Galaxy Fold 2?
aj2019 said:
Got it! Thankyou so much! So, is there any possible way to get Samsung Pay India app on my US version of Galaxy Fold 2?
Click to expand...
Click to collapse
I honestly have no idea. I'd check some of the other Samsung forums, like the Note 20 or Note 10 forums.you may find an answer there as they are more popular devices.
I actually went and flashed my u1 to this version .. everything else works as it should but so far my only drawback is that my samsung sofi account has been deleted after it updated to samsung pay Canada...
Edit: although it samsung pay Canada all I had to the was verify my samsung password and accept samsung pass terms and I was good to go everything is there and works as it should.