Ok, so I ran into a VERY weird issue and was wondering if anyone else has experienced this or has a better solution then what I found.
My Nexus7 was running stock JRO03D. I had it rooted, using the Motley kernel with CWM Recovery - but outside of that, everything else was pretty stock. Anyway, I decided to upgrade to the 4.1.2 image. I pulled the one it downloaded automatically out of /cache and looked at the updater-script to see what it did. I noticed it replaced a lot, including the boot image, so I figured it would be better just to let it do everything and revert my custom stuff later. So I replaced the kernel with the stock JRO03D kernel and, using CWM, flashed the upgrade. Everything seemed to go perfect and it completed the upgrade. Prior to rebooting it, I also flashed the "unofficial" motley 4.1.2 kernel posted on XDA. I rebooted the device, and CWM warned me that 'su' needed to be fixed (how nice!) and made it suid again. It rebooted and after android "updated", everything was up and running. I confirmed in settings that it was on 4.1.2 with the custom kernel. SU was suid root as well. Perfect!
Not quite.
I decided to try rebooting into recovery to make sure CWM was still there, or flash it back if it wasn't. I opened up a terminal emulator, removed the new recovery-recovery image in /system, and did "reboot recovery". The Nexus7 rebooted, but rebooted right back into normal operation. Very weird. So I hooked it up to my computer, figuring CWM was gone, and tried to fastboot flash it back. Fastboot said it did, but I still wasn't able to reboot into recovery. I tried three different versions of CWM and even TWRP, but no dice. Every time I tried rebooting into recovery (using terminal emulator, adb shell or bootloader method) it just went right back into the normal boot process.
I spoke to some people on IRC who recommended reflashing the stock image from Google (without wiping user data). I reflashed the bootloader and then did a fastboot update <stock image>, and it said it replaced boot, recovery, system, etc. It rebooted automatically, and I tried going into stock recovery. That still did NOT work. Instead, I got a very sick looking android guy who was lying down with a red triangle with an exclamation point over him. I was a bit worried and upset at this point. I tried reflashing CWM/TWRP again, but nothing. When I did this, I no longer got the unhappy android image, but it just booted up normally.
I decided to try and doing a more thorough wipe, using fastboot to wipe cache/boot/recovery/system manually. Then I reflashed the bootloader and stock image. Still no recovery (stock or custom).
As you can imagine, I was getting even more concerned now. Especially since I was no without root and no way to get it back (since I couldn't get into recovery to flash the zip for it).
I tried every other thing I could think of to flash recovery back, but nothing worked. It wouldn't load at all.
Finally, I was about to do a complete factory reset and wipe/reflash of everything, but one last thought crossed my mind. I found the older (JRO03D) bootloader and flashed that. Reloaded bootloader and selected "Recovery". Voila, I was in TWRP Recovery Mode! (which was the last one I tried installing). I was able to reinstall my SU.zip and get everything back up and running.
SO, long story short, I'm now on 4.1.2, running the newer unofficial motley kernel and have su back. But I'm also stuck on the older 3.34 bootloader. If I try upgrading it back to 3.41, I won't be able to get into recovery.
Has this happened to anyone else? It doesn't seem like it. Is there a HW issue with my device causing this problem? I can't believe it's software related since I tried two different copies of the 3.41 image. Does anyone have any other suggestions on how I can upgrade the bootloader while keeping the ability to get into recovery mode?
Also, while everything *seems* to be working OK using 3.34, do you think it will cause other problems since I'm using 4.1.2?
Thanks.
*MOD EDIT* please don't quote the entire OP
Thanks for the bootloader info. I was in the same boat, and once I found your post, I went back to JRO03D and my recovery has returned.
Again, thanks, you F'n rule!!!
That android with the red triangle sounds like the stock recovery... so I think you actually got it to work, but you just didn't have a custom recovery...
Then again I don't think I've ever seen the stock recovery. Haha
Sent from my Galaxy Nexus using xda premium
MetalWych said:
Thanks for the bootloader info. I was in the same boat, and once I found your post, I went back to JRO03D and my recovery has returned.
Again, thanks, you F'n rule!!!
Click to expand...
Click to collapse
No problem. I'm glad to hear that my solution above helped someone else, and also that I'm not the only one experiencing the problem. I assume you mean you only went back to the JRO03D bootloader and not the whole image, right?
What I'm most concerned about is that it seems like my N7 (and possibly yours as well) is defective. I'm not an uber-expert on Android, but I'm fairly knowledgeable. With a stock system, outside of userdata, that I reflashed multiple times from multiple sources, to have any type of recovery (stock or custom) not work is a bit upsetting. Since it works fine on the older bootloader, it definitely seems to be an issue with that. But since most people do not have the same issue, the only variable I can see being the difference is hardware.
Metallice said:
That android with the red triangle sounds like the stock recovery... so I think you actually got it to work, but you just didn't have a custom recovery...
Then again I don't think I've ever seen the stock recovery. Haha
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
It looked more like a warning symbol that something went very wrong then a stock recovery screen.
I've gone into stock recovery on other Android devices before, and it looked similar to CWM. There was a menu that allowed you to install "authorized" update.zip files, factory reset the device, etc. There was no menu here, just a very pissed off and sick looking android guy .
I believe I am having the same issue. Would you mind linking me to the bootloader which worked for you? Tried searching but couldn't find it. Thanks, and great post!
Sent from my SCH-I535 using xda premium
There's a big thread around here somewhere with people having the same problem as the op. Unfortunately, staying with the 3.34 bootloader is the only 'fix' I've read about. I still can't figure out why some people run into this problem and some don't. I used twrp to flash the update when it became available, and twrp continued to work afterwards.
spongers said:
I believe I am having the same issue. Would you mind linking me to the bootloader which worked for you? Tried searching but couldn't find it. Thanks, and great post!
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
It took me a long time to find the old full JRO03D update, since Google only has the latest one on their page. I uploaded the bootloader out of it and you can download it here:
http://core.routed.com/bootloader-grouper-3.34.img
Reboot the Nexus7 into bootloader mode and run:
fastboot flash bootloader bootloader-grouper-3.34.img
fastboot reboot-bootloader
and then you should be able to flash recovery and get into it.
Metallice said:
That android with the red triangle sounds like the stock recovery... so I think you actually got it to work, but you just didn't have a custom recovery...
Then again I don't think I've ever seen the stock recovery. Haha
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
The android with the red triangle does not sound like the stock recovery, it is THE stock recovery.
Under JB 4.1.2 you do not need anymore to connect the N7 to a computer - like it had to be under JB 4.1.1 - to access the bootloader and then the recovery.
Now, pressing volume + power brings the bootloader , the up volume, one press, and then power press put the N7 to recovery. The recovery is the android with the red triangle. To enter in the recovery menu pressing power + volume up brings the menu with the following options:
i) reboot system now,
ii) apply update from ADB,
iii) wipe data/factory reset,
iiii)wipe cache partition.
Concerning specifically the OTA update for an unlock and root N7 there should be no problem during the process using stock recovery or CWM 6.0.1.0 as long as OTA Rootkeeper is set, before the installation, in order to keep root.
the fact that you were able to do volume down + power button into bootloader, then select recovery, makes me know its working. and the android guy on his back is the stock recovery... so everything is working fine. you said you flashed motley kernel, it may have something to do with that, and a few other things. you really need to understand how the N7 works, and what it will do if you do not do certain things.
what u should try is, fastboot flash recovery, then fastboot boot recovery
flash a different rom, i prefer Paul's Jr8 as its close to stock with nice little tweaks and see if your issue continues.
at the end of everything, i honestly find this more user error then device related. not everyone understands what the N7 is doing, and why.
smirkis said:
the fact that you were able to do volume down + power button into bootloader, then select recovery, makes me know its working. and the android guy on his back is the stock recovery... so everything is working fine. you said you flashed motley kernel, it may have something to do with that, and a few other things. you really need to understand how the N7 works, and what it will do if you do not do certain things.
what u should try is, fastboot flash recovery, then fastboot boot recovery
flash a different rom, i prefer Paul's Jr8 as its close to stock with nice little tweaks and see if your issue continues.
at the end of everything, i honestly find this more user error then device related. not everyone understands what the N7 is doing, and why.
Click to expand...
Click to collapse
Smirkis, my initial thought was that something went wrong in the upgrade process, possibly with the kernel like you suggested, so, as I mentioned in the OP, I flashed everything back to stock 4.1.2. I used flashboot to manually erase boot, cache, recovery and system. I then reinstalled the bootloader from Google's update tarball. I then used fastboot to update to image-nakasi-jzo54k.zip. At this point, outside of wiping sdcard, everything was stock 4.1.2.
While I will admit that I didn't realize that the dead-looking android meant stock recovery (and that's good to hear), subsequently flashing a custom recovery (CWM or TWRP) would continually fail to load it. In fact, I couldn't even boot into the recovery manually without flashing it. While using 100% stock, I attempted to flash three different versions of CWM and one version of TWRP. It claimed it updated, but I was not able to get back into recovery - either through bootloader, adb or "reboot recovery".
I know it's easy for people to always jump to the "user error" answer, but I fail to see how that is the case here. Based on your response, I don't think you actually read what I did and just jumped to the wrong conclusion, especially since I already tried your recommendation and much more. I am not running any custom ROM - everything was always stock outside of recovery, root and kernel. If you can explain your reasoning for thinking I did something wrong in all of my numerous attempts to get it working, I would appreciate it since maybe that would provide a solution. While I did attempt to use a custom kernel originally, that obviously isn't the issue if going back to stock didn't fix it.
Additionally, reverting back to the older bootloader magically fixed everything, while all other attempts failed. Subsequently reinstalling the custom kernel didn't break anything either. So if it wasn't the bootloader and something else was broken, I would assume it would be broken in both versions of the bootloader. The fact that this problem is affecting others, granted a small number, and the same solution works for them, leads me to believe that there is either a bug in the bootloader affecting some N7s or some rare HW defect causing a few of us problems.
There is a conversation about the new android update the boot-loader update and A Power management chip on the nexus 7.. It seems this chip is being changed out. The new chip functions the same as they have been using but Its not compatible with the old boot-loader . The above is the reason for the boot-loader change.. Google is aware of the troubles everyone in this thread is having . I would be looking for a new very tiny update in the near days. Just a guess im wondering if the truth is they are gearing up for the 3g version of nexus .maybe the pm chip being changed has a issue with the added radios. They did say ITS NOT A Chip upgrade but will not say why they are making the switch .
sorry i do not have a link . but everyone knows how to get to google groups ..
Happy Reading..
I just got another N7 in the mail today, gonna unlock n root it when i get off work. hopefully i end up in your situation so i can attempt to assist in resolving this. why the old bootloader works for you, and never worked for the rest of the world is beyond me. they updated it for a reason lol, i even called google the first week i got mine in july to tell them about the bootloader and they "said" they would forward that info to the development team. it took almost 3 months for them to fix it.
if the old one works for you, then use the old one. the only difference really is the fact that reboot to recovery thru bootloader actually works. if it works for you, don't upgrade.
mine on the other hand, couldn't get into recovery via bootloader. i was dieing for that upgrade, and when it came i was beyond relieved. i did a RMA this week because my first one had screen lift since the 2nd day i owned it lol, so i'll report back when i get home in an hour or so on my results.
smirkis said:
I just got another N7 in the mail today, gonna unlock n root it when i get off work. hopefully i end up in your situation so i can attempt to assist in resolving this. why the old bootloader works for you, and never worked for the rest of the world is beyond me. they updated it for a reason lol, i even called google the first week i got mine in july to tell them about the bootloader and they "said" they would forward that info to the development team. it took almost 3 months for them to fix it.
if the old one works for you, then use the old one. the only difference really is the fact that reboot to recovery thru bootloader actually works. if it works for you, don't upgrade.
mine on the other hand, couldn't get into recovery via bootloader. i was dieing for that upgrade, and when it came i was beyond relieved. i did a RMA this week because my first one had screen lift since the 2nd day i owned it lol, so i'll report back when i get home in an hour or so on my results.
Click to expand...
Click to collapse
Just to clarify, going from bootloader->recovery never worked for me either. Whenever I needed to get into recovery mode, I just opened up a terminal, su'd to root and then ran "reboot recovery", or occasionally doing it via adb. However, those methods always worked for me until I upgraded to the latest bootloader. Then, no custom recoveries would load via any method.
My Nexus7 was first generation. I actually picked it up in Sams Club the day before they were officially released. So if Google made any HW changes in the different revisions, that might explain the difference in results on 4.1.2. Though I imagine most people on XDA also picked theirs up out of the first batch, so I don't think that could be the case. What seems more likely is that there are minor hardware differences that are causing some people's to fail with the 3.41 bootloader, while most don't have that issue. It will be interesting to see if you experience the same issue on your new one though.
gunner1937 said:
Concerning specifically the OTA update for an unlock and root N7 there should be no problem during the process using stock recovery or CWM 6.0.1.0 as long as OTA Rootkeeper is set, before the installation, in order to keep root.
Click to expand...
Click to collapse
It didn't worked for me. I've tried Rootkeeper apk, but it was useless.
This was driving me crazy until I've found this topic! I've tried resetting it to original settings, using rootkeeper and traditional methods, nothing, zero!
At last, phonic saved my life, and finally I a could root my Nexus 7!
I never responded but my RMA worked as it should. but the issue has been resolved with recovery updates from the developers. the rest of the world who had issues should be good to go. I ended up selling my 16gb unit and got a 32 and it works as it should as well. are we all happy campers now?
Sent from my Nexus 7 using xda premium
I've had similar experiences where the way certain kernels install zips are packaged, the wipe custom recoveries at install. In that situation, I've never wiped anything from system, but rebooted into bootloader and fastboot boot recovery "recovery.img". Then from there install the recovery.zip. The worst is when this happens when you get flash happy away from home and the kernel doesn't work. No way to fix without a comp w/SDK. Glad you're back up and running.
(I cannot be held responsible if the aforementioned damages your device; do the research and own the process.)
I am so glad to have found this thread. This problem was beginning to drive me nuts.
I've rooted my Nexus One a long long time ago, and eventually reverted to it's original state. Let's skip ahead a year..
I wan't to use my Nexus One again until I can get my hands on a Nexus 4. I'm trying to root this bad boy, but run into a problem with every method. I got the one click method to work, but it wouldn't boot up. And when I try to go into Bootloader for recovery, it checks for the PASSIMG.ZIP file and then updates. If I click no, it makes no difference, it doesn't let me do anything. Updating will restore the phone to stock(unrooted). So I deleted PASSIMG.ZIP from the SD card. Ever since, I can actually click on Recovery, but I run into trouble(see further below). S is ON btw, I don't remember what this was, but I'm sure I had it OFF before? I have been using an iPhone for the past year and a half, so I apologize for being a noob. I'm not to tech savvy when it comes to these terms, either.
Short explanation:
One Click Root - I can root it, but when I go to Bootloader Recovery it shows the Android guy and a triangle around !
Using the old school method using Windows terminal, recovery-clockwork-5.0.2.0-passion.img was flashed without problem.
But I can't access Recovery!
In the end I'm trying to at least have an ICS ROM, or Jellybean(Really wanna try Google Now or whatever) if possible.
Check the Wiki for instructions on how to bootloader unlock your phone. Much easier. You can then flash everything you want using fastboot (so make sure you have the fastboot driver installed correctly).
Btw, the triangle means you still have stock recovery.
tommert38 said:
Check the Wiki for instructions on how to bootloader unlock your phone. Much easier. You can then flash everything you want using fastboot (so make sure you have the fastboot driver installed correctly).
Btw, the triangle means you still have stock recovery.
Click to expand...
Click to collapse
The unlock padlock icon means the bootloader is unlocked, correct? I've done that. And I actually went through that, and flashed the custom Recovery, still the same result. I'll retry it again.
I figured it out, but I don't get it...
I did this in kind of a different route, so just incase someone runs into a similar problem some how:
I rooted the phone using the one click root software on a windows PC, the N1 was successfully rooted.
However, same error recovery, even after adb flashing recovery(followed wiki and unlockr tutorial).
What I did different to fix the issue, was after the root, I downloaded Rom manager(yes I've done this before too, but...), I flashed the recovery via Rom Manager. After it didn't work(sadface).
I tried it again, but just out of frustration I re-flashed it after flashing. So I flashed the recovery twice, back to back. And poof, I check bootloader, go into recovery, and there it is(just like it used to be).
Close this I guess, (an embarrassing)problem has been solved.
I had a TF701T tablet and dock I sold on ebay. It was neither rooted nor unlocked and worked fine. The buyer later complained saying it didnt work right, wouldn't read the SD nor an external drive. Now i know to read a external drive it needs to be rooted. But I advised it worked perfectly when it was sold. He filed a PP claim. It got here and guess what, it doesnt work right because he unloaded the bootloader flashed CWM on it. IDK what else was done but he lost the PP claim and rightfully so. But with that being said, the tablet would not turn off so eventually it will die. It will charge though. Where would I begin in flashing (I assume) the OEM software to make it usuable again?
Sounds like your buyer was a straight up dumbass.
The first thing I think you need to do is check the forum for the updated bootloader and recovery and go from there if you can install them. If you can't, idk.
You begin by determining which bootloader version you currently have: Boot holding Power and Volume Down until you see some small text. Let go, read the text and post it. Do not use the Wipe Data option from that page with CWM installed!!!!!!!!
Next you need to find the corresponding stock recovery (same firmware version) at Droidbasement and flash it in fastboot.
That done you download the Asus firmware for your SKU, unzip that file once resulting in another zip. If the tablet boots into Android, you can copy the second zip to the root of your internal storage. You should get a notification that an update is available. Confirm it and the stock recovery will flash it. That'll put you back onto stock. But there is no way to relock the bootloader - sorry.
If that does not work there's also a way to flash the stock firmware from a microSD. Let me know.
I wrote a pretty detailed guide on flashing a recovery and rom for the TF700. It's the first sticky in the TF700 General section.
Read that for the basics on getting fastboot to work.
The TF701 is very similar to the the TF700, but there are small but important differences and I wrote that guide for people trying to get AWAY from stock, so you're gonna have to extrapolate. But the basic steps are the same.
Ask here if not sure and flash only once you are clear on each step.
An easier option would be to flash one of sbdag's stock Asus roms. You still have to determine which bootloader you have now and if your CWM version is compatible. But if both are ok, you could just flash the rom and would be on pure Asus stock, but rooted with a custom recovery and could try to sell it as such.
There may be people who actually looking for a tablet all ready for flashing custom roms to it...
Lets face it: Nobody knows what that guy did to the tablet and you should disclose that to the next buyer. So I think you have a better chance to sell it to someone who wants to tinker with it. Swappa would be a good place for that.
Thanks guys. I finally got this back working.
weedahoe said:
Thanks guys. I finally got this back working.
Click to expand...
Click to collapse
Out of curiosity: How?
In the end, a data wipe though CWM that was installed by the buyer.
Thank God it was simple.
Hi, I did a lot of things with my One Mini 2 and I actually really don't know what to do anymore... So much options and yet there always seems to be a problem. Let me explain everything.
What I did:
-flashed a custom rom, then went back to a stock rom of this forum
-flashed the dt2w kernel, it messed up my phone so I then flashed the liberty one, which worked
But with the liberty one I had some memory problems, for exemple I couldn't take screenshots... That's why I decided that I wanted to put my phone just as it was when I bought it, I really hope that's possible, by that I mean having official firmwares etc, therefore being able to do official upgrades from my phone (is that what OTA is?).
I looked on internet and it looks like what I need is RUU, as it includes everything (from what I understood)... I know a lot of threads were made about this, but quite a few months ago, so that's why I'm making a new one, and to make things clear.
Also, I downloaded an official kernel from htcdev.com, but each time I tried flashing it with TWRP, it "failed".
So, if you guys have an answer, solution or, in best case, the actual RUU, that would be great.
Thanx
Linkalex1 said:
Hi, I did a lot of things with my One Mini 2 and I actually really don't know what to do anymore... So much options and yet there always seems to be a problem. Let me explain everything.
What I did:
-flashed a custom rom, then went back to a stock rom of this forum
-flashed the dt2w kernel, it messed up my phone so I then flashed the liberty one, which worked
But with the liberty one I had some memory problems, for exemple I couldn't take screenshots... That's why I decided that I wanted to put my phone just as it was when I bought it, I really hope that's possible, by that I mean having official firmwares etc, therefore being able to do official upgrades from my phone (is that what OTA is?).
I looked on internet and it looks like what I need is RUU, as it includes everything (from what I understood)... I know a lot of threads were made about this, but quite a few months ago, so that's why I'm making a new one, and to make things clear.
Also, I downloaded an official kernel from htcdev.com, but each time I tried flashing it with TWRP, it "failed".
So, if you guys have an answer, solution or, in best case, the actual RUU, that would be great.
Thanx
Click to expand...
Click to collapse
Still no RUU's avaiable as HTC wont release them. your best option is to use TWRP backup and restore.
Original stock backup
Thank you, but my backup kind of disappeared... I saw your post where there was the "HTC Original Backup.zip", I tried to flash but again it failed... Am I supposed to flash it as a backup?
Linkalex1 said:
Thank you, but my backup kind of disappeared... I saw your post where there was the "HTC Original Backup.zip", I tried to flash but again it failed... Am I supposed to flash it as a backup?
Click to expand...
Click to collapse
You need to send it as it is to your phone and use TWRP > restore. choose file and done.
Thanx so much for answering... I uses the backup you told me to. Although I had to use the "install" option instead of the backup one, it now works perfectly! But how do I know if my phone is "official"? Are the upgrades going to be made straight from the phone?
Linkalex1 said:
Thanx so much for answering... I uses the backup you told me to. Although I had to use the "install" option instead of the backup one, it now works perfectly! But how do I know if my phone is "official"? Are the upgrades going to be made straight from the phone?
Click to expand...
Click to collapse
Yes OTA updates should work just fine. just look for updates in settings>about >software update.
you may have one for polaris office.
Hi, I just want to check this too before I screw up wife's phone..
She has CM12 on her phone now as I replaced recovery as well as unlocking bootloader. Now she wants it back to stock as too many things crash on her. I get that I can install your backup but what worries me is that other posts have said you need the stock recovery to allow for OTA updates to work and the link to this no longer works.
She MUST have OTA updates or my balls will be removed, so can you please confirm this, but also explain why.
Thanks (on behalf of my testicles and unborn children!)
(Oh, and she wants it unrooted ant the bootloader relocked)
arm1e said:
Hi, I just want to check this too before I screw up wife's phone..
She has CM12 on her phone now as I replaced recovery as well as unlocking bootloader. Now she wants it back to stock as too many things crash on her. I get that I can install your backup but what worries me is that other posts have said you need the stock recovery to allow for OTA updates to work and the link to this no longer works.
She MUST have OTA updates or my balls will be removed, so can you please confirm this, but also explain why.
Thanks (on behalf of my testicles and unborn children!)
(Oh, and she wants it unrooted ant the bootloader relocked)
Click to expand...
Click to collapse
Stock Recovery
To unroot just lock bootloader:
fastboot oem lock
Even after a year on Android, I'm quite the novice, so please bear with me. So, I rooted my Moto X '14 using CF Autoroot because it was so easy. But, I had no idea how to unroot. So I googled some stuff and I attempted to flash back to total stock rooted rom and recovery. Foolishly, I picked the option to not wipe. So, when it rebooted, it went to the boot screen and crashed.
After trying everything, I realized I had no choice and did an external reset. So, hello 2014 because I'm back on KitKat but still was rooted. After looking around, I realized I can 'unroot' by pressing the option on SuperSU. But, I think all I did was revoke root access because on the bootloader, it still says modified.
I tried to go back to lolipop, but every time I take the OTA, the install crashes, but my phone works fine. So, what I wanna know is how I can go back to stock. Is it easy as flashing as flashing a 5.0 factory image? Or is there more I have to do?
bump
Ownage516 said:
Even after a year on Android, I'm quite the novice, so please bear with me. So, I rooted my Moto X '14 using CF Autoroot because it was so easy. But, I had no idea how to unroot. So I googled some stuff and I attempted to flash back to total stock rooted rom and recovery. Foolishly, I picked the option to not wipe. So, when it rebooted, it went to the boot screen and crashed.
After trying everything, I realized I had no choice and did an external reset. So, hello 2014 because I'm back on KitKat but still was rooted. After looking around, I realized I can 'unroot' by pressing the option on SuperSU. But, I think all I did was revoke root access because on the bootloader, it still says modified.
I tried to go back to lolipop, but every time I take the OTA, the install crashes, but my phone works fine. So, what I wanna know is how I can go back to stock. Is it easy as flashing as flashing a 5.0 factory image? Or is there more I have to do?
Click to expand...
Click to collapse
Just flash system and the root will be gone. Also, if you have other mods like TWRP or different modem the OTA won't install, so in order to get the latest update just flash all the files
Good luck
juliospinoza said:
Just flash system and the root will be gone. Also, if you have other mods like TWRP or different modem the OTA won't install, so in order to get the latest update just flash all the files
Good luck
Click to expand...
Click to collapse
Man, this would've been so helpful a month ago, lol.
Ownage516 said:
Man, this would've been so helpful a month ago, lol.
Click to expand...
Click to collapse
Sorry. Usually I just browse the last 10 questions. And in this post I saw "bump" bit I didn't check that wasn't you who did it LOL.
juliospinoza said:
Sorry. Usually I just browse the last 10 questions. And in this post I saw "bump" bit I didn't check that wasn't you who did it LOL.
Click to expand...
Click to collapse
Haha, it's all good. I just didn't know how that other dude dug this up.