Hi, today I tried to flash stock firmware via Orange Fox recovery and the phone got stuck with a message "The current image have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it."
I was wondering if it's fixable or if anyone of you had the same issue and managed to fix it.
karlo995 said:
Hi, today I tried to flash stock firmware via Orange Fox recovery and the phone got stuck with a message "The current image have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it."
I was wondering if it's fixable or if anyone of you had the same issue and managed to fix it.
Click to expand...
Click to collapse
Did you flash vbmeta.img?
Related
So I had successfully used MOFO to flash the rooted 5.0 img and when using Titanium to freeze some stuff I must've accidentally added a required system apk to my custom filter and I intended to only have bloat so I deleted all of them on the list including the apk and my phone restarted and whenever i try turning it back on, it shows a black screen after the verizon logo shows up than it gets hot and burns up. I can still use fastboot and I tried reflashing rootjunkys rooted img again but that didn't work so i also tried the stock img and that didn't work either. I also tried Motorola device manager and after it checks for update it says no update is needed and my devices' system is n/a. So help please?
I also tried to factory reset but i cant even get into recovery.
sonic1675 said:
I can still use fastboot and I tried reflashing rootjunkys rooted img
Click to expand...
Click to collapse
RJ's 5.0 rooted image does not work.
Get into fastboot mode, connect your phone to your PC and use mofo.exe to flash the 5.0 pre-rooted image that is linked to in the OP of the MoFo thread.
http://forum.xda-developers.com/general/paid-software/mofo-root-turbo-t3064404
ok ill try that and lyk the results. Thanks.
sonic1675 said:
ok ill try that and lyk the results. Thanks.
Click to expand...
Click to collapse
quote me if you do b/c otherwise i may not notice you responded.
JulesJam said:
quote me if you do b/c otherwise i may not notice you responded.
Click to expand...
Click to collapse
So I reflashed every img available on maikos mofo page and the phone still gives me a black screen after the boot logo and whenever i try to get into recovery i get this message:
hab check failed for recovery
failed to validate recovery image
sonic1675 said:
So I reflashed every img available on maikos mofo page and the phone still gives me a black screen after the boot logo and whenever i try to get into recovery i get this message:
hab check failed for recovery
failed to validate recovery image
Click to expand...
Click to collapse
I think you are going to have to try to flash back to stock. It looks like somehow your recovery got messed up. Check out my Noob Guide for instructions on how to flash back to stock 5.0:
http://forum.xda-developers.com/moto-x-2014/general/noob-guide-rooting-verizon-moto-x-2014-t3097375
JulesJam said:
I think you are going to have to try to flash back to stock. It looks like somehow your recovery got messed up. Check out my Noob Guide for instructions on how to flash back to stock 5.0:
http://forum.xda-developers.com/moto-x-2014/general/noob-guide-rooting-verizon-moto-x-2014-t3097375
Click to expand...
Click to collapse
I tried it but it didn't work. I had to go delete everything through fastboot and flag each IMG separately. But though everything got deleted I got a fresh install of 5.0 and I'm not bricked Lol.
Hi, I am new to this forum but old on android. My oneplus 3t brick yesterday and i don't know why. I never rooted phone and always update phone via OTA. I contacted Oneplus support yesterday and they arrange a remote session where they are unable to install anything via msmdownload tool. I download msmdownload tool yesterday from this forum and my phone works but there is no modem in it. I am unable to connect to wifi and SIM internet. Oxygen OS version install at the moment is 3.5.1 and android version is 6.0.1. Need help from some seniors.
Update by using on the of the official "full zips"? These include the modem, so I would think that would fix the problem, unless there is a more serious issue (hardware failure, etc.):
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oxygenos-3-5-4-mm-ota-update-t3519074
redpoint73 said:
Update by using on the of the official "full zips"? These include the modem, so I would think that would fix the problem, unless there is a more serious issue (hardware failure, etc.):
https://forum.xda-developers.com/oneplus-3t/how-to/rom-oxygenos-3-5-4-mm-ota-update-t3519074
Click to expand...
Click to collapse
I tried multiple time but device stuck in boot loop. Downloaded ROM from Oneplus official site.
xusmanmalik said:
I tried multiple time but device stuck in boot loop. Downloaded ROM from Oneplus official site.
Click to expand...
Click to collapse
The full zip or the OTA?
Is your phone rooted/TWRP installed, or is it stock?
redpoint73 said:
The full zip or the OTA?
Is your phone rooted/TWRP installed, or is it stock?
Click to expand...
Click to collapse
Phone is stock not rooted. When i upgrade locally or through adb process phone stuck in bootloop.
xusmanmalik said:
Phone is stock not rooted. When i upgrade locally or through adb process phone stuck in bootloop.
Click to expand...
Click to collapse
Now i updated from 3.5.1 to 3.5.4 but issue still exist
xusmanmalik said:
Now i updated from 3.5.1 to 3.5.4 but issue still exist
Click to expand...
Click to collapse
Upgrading from 3.5.4 to 4.0.2 phone again stuck at boot screen. I don't know what to do know. Should i go for warranty claim or try something else. Need HELP!!!!
Thanks in Advance.
Are you able to go to fastboot mode? If yes, go for it:
https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
Install TWRP too. Now you're able to wipe everything and upload a full ROM to your device (Thanks to MTP-mode via TWRP, so handy!). Flash the full ROM and have a try .
MickyFoley said:
Are you able to go to fastboot mode? If yes, go for it:
https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
Install TWRP too. Now you're able to wipe everything and upload a full ROM to your device (Thanks to MTP-mode via TWRP, so handy!). Flash the full ROM and have a try .
Click to expand...
Click to collapse
Micky Thanks for the help. I will give a try and will inform further.
I ****ed up somewhere. Encryption unsuccessful Error.
xusmanmalik said:
I ****ed up somewhere. Encryption unsuccessful Error.
Click to expand...
Click to collapse
Do you have TWRP installed? Just wipe your phone, get an otg cable and a flash drive, you can flash everything from the flash drive
I revert back trying again now.
xusmanmalik said:
Micky Thanks for the help. I will give a try and will inform further.
Click to expand...
Click to collapse
Hi Micky Foley, I successfully followed all steps and now i am on twrp and su installed.
But still i am unable to install other ROM than 3.5.*
Your last option is the warranty then mate
Hello,
If anyone could help me out it would be greatly appreciated. I have a US model BLA-A09 Mate 10 Pro.
I am definitely somewhat new to this. My Mate 10 is now in a boot loop. It gets to the EMUI recovery, but when attempting to download the recovery package from my wifi it fails and goes no further stating something like "cannot get package info".
I successfully unlocked my phone's bootloader, and succesfully rooted it, and I even got the latest TWRP installed on the phone. What I was trying to do however, was follow this thread https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280.
I was trying to use that thread to get magisk installed but in doing so I went into TWRP and flashed a file called "BKL-L09_ramdisk.img" when my phone is actually BLK-A09.
Now, I have no access to TWRP as far as I can tell, and the EMUI recovery fails as mentioned before. I can only get into fastboot now and I dont know what to do to get the phone working again. Do I need to flash the stock image of my phone or is it possible I messed it up more than that?
Edit: also here is everything I could get from fastboot about the device.
https://ibb.co/dtQ8Rc
Thank you for the help
Ltsmba said:
Hello,
If anyone could help me out it would be greatly appreciated. I have a US model BLA-A09 Mate 10 Pro.
I am definitely somewhat new to this. My Mate 10 is now in a boot loop. It gets to the EMUI recovery, but when attempting to download the recovery package from my wifi it fails and goes no further stating something like "cannot get package info".
I successfully unlocked my phone's bootloader, and succesfully rooted it, and I even got the latest TWRP installed on the phone. What I was trying to do however, was follow this thread https://forum.xda-developers.com/ho...gisk-root-honor-view-10-mate-10-pro-t3749280.
I was trying to use that thread to get magisk installed but in doing so I went into TWRP and flashed a file called "BKL-L09_ramdisk.img" when my phone is actually BLK-A09.
Now, I have no access to TWRP as far as I can tell, and the EMUI recovery fails as mentioned before. I can only get into fastboot now and I dont know what to do to get the phone working again. Do I need to flash the stock image of my phone or is it possible I messed it up more than that?
Edit: also here is everything I could get from fastboot about the device.
https://ibb.co/dtQ8Rc
Thank you for the help
Click to expand...
Click to collapse
Power down your device. Vol+ and Power should bring you to twrp
Ltsmba said:
Hello,
If anyone could help me out it would be greatly appreciated. I have a US model BLA-A09 Mate 10 Pro.
I am definitely somewhat new to this. My Mate 10 is now in a boot loop. It gets to the EMUI recovery, but when attempting to download the recovery package from my wifi it fails and goes no further stating something like "cannot get package info".
I successfully unlocked my phone's bootloader, and succesfully rooted it, and I even got the latest TWRP installed on the phone. What I was trying to do however, was follow this thread https://forum.xda-developers.com/ho...gisk-root-honor-view-10-mate-10-pro-t3749280.
I was trying to use that thread to get magisk installed but in doing so I went into TWRP and flashed a file called "BKL-L09_ramdisk.img" when my phone is actually BLK-A09.
Now, I have no access to TWRP as far as I can tell, and the EMUI recovery fails as mentioned before. I can only get into fastboot now and I dont know what to do to get the phone working again. Do I need to flash the stock image of my phone or is it possible I messed it up more than that?
Edit: also here is everything I could get from fastboot about the device.
https://ibb.co/dtQ8Rc
Thank you for the help
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
-Download UPDATE.zip at the bottom of OP
-Unzip
-Flash in fastboot
253simon said:
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-bla-a09-c567-usa-t3775258
-Download UPDATE.zip at the bottom of OP
-Unzip
-Flash in fastboot
Click to expand...
Click to collapse
I agree, this saved my device yesterday. I would download the already extracted zip at the bottom of that post (in OP). Flash the SYSTEM.img using fastboot. Then try rebooting. If it still boot loops I suggest you also flash the KERNEL and the RECOVERY_RAMDISK
When I tried to flash the system.img in fastboot it wouldn't work I can flash other things but it says unknown partition
I have installed Lineage OS 18 Android 11 Rom from below thread,
https://forum.xda-developers.com/realme-x2-pro/development/rom-lineageos-18-0-realme-x2-pro-t4177291
I have used the OrangFox R11 Recovery for the installation.
Now I can not go back to stock C.33 firmware. I have tried installing OZIP both with TWRP and OrangeFox but no luck so far. Whenever the installation completes and I reboot the device, it shows boot/recovery damaged error message.
I have tried OZIP installation followed by vbmeta.img flashing as well. But no luck. Still the same error message.
I have tried flashing fastboot rom with all files (but no recovery img was inside) as well but still the same error.
I have tried RealMe Flash Tool with Firmware OFP but still the same error.
I'm simply stuck on this LineagOS 18 rom and I badly wanna go back to the Stock rom. :crying:
Please help!
P.S : If this thread needs to be moved somewhere elsle please be kind enough to do so. I'm not so familiar with thread openings. Sorry about it. :fingers-crossed:
Format data after flashing Ozip thats important . try that with twrp
Anask3444 said:
Format data after flashing Ozip thats important . try that with twrp
Click to expand...
Click to collapse
Already tried bro.. no luck
ImperoDroider said:
Already tried bro.. no luck
Click to expand...
Click to collapse
Did you try the fastboot flashable images?
https://forum.xda-developers.com/re...ock-fastboot-flashable-images-realme-t4003107
ImperoDroider said:
I have installed Lineage OS 18 Android 11 Rom from below thread,
https://forum.xda-developers.com/realme-x2-pro/development/rom-lineageos-18-0-realme-x2-pro-t4177291
I have used the OrangFox R11 Recovery for the installation.
Now I can not go back to stock C.33 firmware. I have tried installing OZIP both with TWRP and OrangeFox but no luck so far. Whenever the installation completes and I reboot the device, it shows boot/recovery damaged error message.
I have tried OZIP installation followed by vbmeta.img flashing as well. But no luck. Still the same error message.
I have tried flashing fastboot rom with all files (but no recovery img was inside) as well but still the same error.
I have tried RealMe Flash Tool with Firmware OFP but still the same error.
I'm simply stuck on this LineagOS 18 rom and I badly wanna go back to the Stock rom. :crying:
Please help!
P.S : If this thread needs to be moved somewhere elsle please be kind enough to do so. I'm not so familiar with thread openings. Sorry about it. :fingers-crossed:
Click to expand...
Click to collapse
If it says "boot/recovery damaged" and you're still able to use your phone, you should consider yourself lucky. I had to send mine in warranty for repair. I too am trying to go back to stock ROM after installing LOS 18.
Schumanzuar said:
Did you try the fastboot flashable images?
https://forum.xda-developers.com/re...ock-fastboot-flashable-images-realme-t4003107
Click to expand...
Click to collapse
These images have bricked my phone! Error message:
The current image(boot/recovery) have been destroyed and can not boot.
Please flash the correct image or contact customer service to fix it.
Tried flashing TWRP, no luck. Cannot boot.
do you have flash again the vbmeta.bin
I do that and after the rom start again for me
rpfe26 said:
do you have flash again the vbmeta.bin
I do that and after the rom start again for me
Click to expand...
Click to collapse
I didn't try that, however I did manage to get my phone up and working again after having destroyed the boot/recovery
I used Realme Flash Tool in combination with TWRP to get the phone up and running.
ImperoDroider said:
I have installed Lineage OS 18 Android 11 Rom from below thread,
https://forum.xda-developers.com/realme-x2-pro/development/rom-lineageos-18-0-realme-x2-pro-t4177291
I have used the OrangFox R11 Recovery for the installation.
Now I can not go back to stock C.33 firmware. I have tried installing OZIP both with TWRP and OrangeFox but no luck so far. Whenever the installation completes and I reboot the device, it shows boot/recovery damaged error message.
I have tried OZIP installation followed by vbmeta.img flashing as well. But no luck. Still the same error message.
I have tried flashing fastboot rom with all files (but no recovery img was inside) as well but still the same error.
I have tried RealMe Flash Tool with Firmware OFP but still the same error.
I'm simply stuck on this LineagOS 18 rom and I badly wanna go back to the Stock rom. :crying:
Please help!
P.S : If this thread needs to be moved somewhere elsle please be kind enough to do so. I'm not so familiar with thread openings. Sorry about it. :fingers-crossed:
Click to expand...
Click to collapse
I managed to get my phone up and running. Did you manage to get yours?
Milan-XDA said:
I managed to get my phone up and running. Did you manage to get yours?
Click to expand...
Click to collapse
You mean you got it back to stock from lineage os 18 by flashing through realme flash tool?
adimegarocker said:
You mean you got it back to stock from lineage os 18 by flashing through realme flash tool?
Click to expand...
Click to collapse
Yes, that is correct.
hi all, yesterday morning I installed the pixel experience custom rom on my note 8, in the afternoon I wanted to flash the plus version, but by mistake instead of going into recovery I pressed the keys to go into download mode. Then I did the right key combination to go into recovery but the phone got stuck on the twrp screen and it didn't work. So I thought of flashing the recovery again but it still stuck. I tried to flash a stock firmware but it says failed. I ask you for help what can I do?
marcello.paura said:
(...) I tried to flash a stock firmware but it says failed. I ask you for help what can I do?
Click to expand...
Click to collapse
You need to use 4-file stock firmware for the partitions to be renewed.
done but it says failed
marcello.paura said:
done but it says failed
Click to expand...
Click to collapse
Are you sure you used the correct firmware for your device model?
Yes