Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Connect phone to computer.
Take off battery. And wait.
Is your pc can detect your device on bootloader mode?
yasteellutch said:
Hey guys
Please may your help me. I recently bought a Wileyfox Swift and decided to install CyanogenMod 12.1 for my phone. I installed CM12.1 successfully and used it for a week. 2 days ago I tried to restore stock by fastbooting the ROM found on NeedROM. After it installed my Swift just turned off and couldn't turn back on. My PC sees it as Relink HS-USB QDLoader 9008. May someone please provide me with a way to unbrick this device?
Thanks
Regards
Y Lutch
Click to expand...
Click to collapse
Or google "Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 (if you have the right kind of rom)"
And use that method.
Yes
nhmanas said:
Is your pc can detect your device on bootloader mode?
Click to expand...
Click to collapse
My pc sees the phone in QDLoader 9008 mode
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
I don't know what that is but flash stock rom again via fastboot
General Mobile 4G Dual cihazımdan Tapatalk kullanılarak gönderildi
yasteellutch said:
My pc sees the phone in QDLoader 9008 mode
Click to expand...
Click to collapse
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
I shall try but I pray it works. I am literally stuck in Android Development without my phone, Emulators aren't good enough
My dear sir you are a freaking genius
You my friend are a genius. I dont know where you acquired these files. It works like brand new. Thank you sir. Thank you thank you thank you!!!!!!!!!!!!!!!!
One Problem.
FindYanot said:
Open this link
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction here
Click to expand...
Click to collapse
The phone wont turn on with battery in. It only turns on when I use usb without battery
yasteellutch said:
The phone wont turn on with battery in. It only turns on when I use usb without battery
Click to expand...
Click to collapse
Try flash stock rom via fastboot from here
http://builds.cyngn.com/factory/crackling/cm-12.1-YOG4PAS33J-crackling-signed-fastboot.zip
FindYanot said:
Open https://cloud.mail.ru/public/NExC/qxFwsmmmV/Wileyfox Swift/Recover SW/
"Драйвера" = Drivers. Dowload drivers for your system (86/64)
Download any Recover SW zip with ROM
Then download Tool + instruction https://mega.nz/#!YUFiXRwI!PlPCplXY31Rje57IfmWucTbRY6d56nSU6de46cQxIqU
Click to expand...
Click to collapse
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
dabotsonline said:
Hi @FindYanot , are you able to upload WileyfoxTool1.0 exe on your website and also MEGA? I can't register at 4pda.ru as I always fail the CAPTCHA, even when I use the Russian Keyboard Viewer on Mac.
I have obtained the Android One (General Mobile 4G LUZ17E Retail build) prog_emmc_firehose_8916.mbn , emmc_appsboot.mbn , patch0.xml , rawprogram_upgrade.xml , system.img , NON-HLOS.bin etc. files from Longcheer but I can't get into Emergency Download Mode from my hardbricked Swift, even when pressing Volume Up or Volume Down + Power when inserting USB cable. 'fastboot devices' doesn't list the phone when connected via USB cable, and QFIL 2.0.0.3 within QPST 2.7.429 Qualcomm 9008 2.1.0.5 on Windows 10 x86 gives me a Sahara error and RELINK / Woowellstrong Electronic co., ltd 9008 2.0.0.0 on Windows 8.1 x64 gives me an EDL error.
Thank you.
Click to expand...
Click to collapse
Would you mind posting those files, why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Sent from my SM-N920I using Tapatalk
hmsq said:
... why aren't you using the Swift recover files as findyanot posted it fixed my one, it w was seen as 9008 after I installed driver, I also removed battery before plugging to PC.
Click to expand...
Click to collapse
I have those files as well, and get the same problem even when removing the battery.
hmsq said:
Would you mind posting those files...
Click to expand...
Click to collapse
Will do when I have a chance!
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
virusib said:
Hi everyone, I have a Lenovo zuk z2 pro, and it does not go out of EDL mode
I've tried everything, all the possible key combinations, it also has no indication of any led on, it just gets the screen all black and does nothing else, when I connect it to the USB port, QFIL recognizes it in the EDL 9008 mode, can anyone help me please?
Thank you in advance for your attention.
Click to expand...
Click to collapse
When you flash zui rom with qfil it restart automatically . What about your power button ? Everything was ok before that ?
How to move from edl to fastboot
Look this
youtube.com/watch?v=2m44xKog-dI
I've used this tutorial several times.
Try it, too.
It's safe
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
virusib said:
Hi, I discovered that my USB ports on my PC are broken, sorry and TKS guys
Click to expand...
Click to collapse
How can a broken port ( or do u say all ports?) recognize the phone with 9008, but is unable to flash?
They apparently work, but the copy of the files don't finish 100% in qfil app, I had Sahara error, but when I tried in the computer of my cousin, everything worked ok and I could make the installation of the stock room by qfil normally.
Last night I turned off the phone and today I want to turn on but nothing only black screen. not able to charge, when I connect to PC I hear sound but only in the device manager can see COM/LTP ports Qualcomm HS-USB QDLoader 9008 (COM4).
I read this is the EDL mode but I don't know how started in this mode.
I installed the ADB, XIAOMI Drivers and MiFlash. After I flashed a chinese stock rom and after flashed the latest global stock rom. The flash was successful but When I disconnect and reconnect again to PC my Redmi 4x is still in EDL mode...
I tried the 2-3 buttons restart and some youtube things but the results is same: Redmi 4x stuck EDL mode.
Plz could anyone help me?
I got bricked my xiaomi mi a2, unscrewed it and went into edl mode. When i connect it into computer, it identifies phone like storage device and mi flash tool cannot flash it because of "error: flash timeout". How can i solve it? Maybe i ve installed wrong drivers? (sory for bed inglesh)
have you installed qualcom drivers ??
of not first install the qualcom drivers then try.
Hi,
Trying to install a ROM with fastboot (xiaomi 12.5.7.0) it seems something went wrong during the process.
So once the flash was done, device tried to reboot. All I got is a bleck screen with nothing happening.
Device is of course not detected by computer.
And of course nothing happens when I press the buttons.
Any idea or trick to help me out of this mess ?
Regards.
FRED
Here's some additional info :
if the device is hooked up to Windows, Windows plays a sound when it is hooked up.
And if I pressed the power button long enough, Windows plays like "on sound" and after some seconds a "off" sound.
So it does something...
Unbrick Xiaomi using miflash | Authorization EDL flash Xiaomi | Authorized Account
Unbrick Xiaomi using miflash | Authorization EDL flash Xiaomi | Authorized Account DOWNLOAD MODIFIED MIFLASH AND Qualcomm HS-USB QDLoader 9008 DRIVER The following actions : 1) Connect phone to pc in EDL mode 2) Open Miflash and specify the path to the firmware 3) Click on flash 4) A window...
xiaomi.eu
try this