Database Develop

[Q] Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick

Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick
Phone will not turn on...
power + vol up (not work)
power + vol down (not work)
power + vol up and down (not work)
Charge led (not work) (Pc usb 2.0 - usb 3.0 and normal charge)
home and back light (not work)
Just pc device manager "Qualcomm HS-USB Qdloader 9008" mod activated....
My system Windows 8.1

AngelFRANTIX said:
Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick
Phone will not turn on...
power + vol up (not work)
power + vol down (not work)
power + vol up and down (not work)
Charge led (not work) (Pc usb 2.0 - usb 3.0 and normal charge)
home and back light (not work)
Just pc device manager "Qualcomm HS-USB Qdloader 9008" mod activated....
My system Windows 8.1
Click to expand...
Click to collapse
it depends how it happened
a) you were flashing firmware, then do this: http://forum.xda-developers.com/showthread.php?t=2770684
b) it happened by itself (ie you weren't flashing things) -> hard brick, off to repair / get a new phone

nkk71 said:
it depends how it happened
a) you were flashing firmware, then do this: http://forum.xda-developers.com/showthread.php?t=2770684
b) it happened by itself (ie you weren't flashing things) -> hard brick, off to repair / get a new phone
Click to expand...
Click to collapse
watched the movie.. after... charge finish
phone will not turn on
no led light
no vibration
no feel

AngelFRANTIX said:
watched the movie.. after... charge finish
phone will not turn on
no led light
no vibration
no feel
Click to expand...
Click to collapse
phone is dead, sorry
send it to repair

AngelFRANTIX said:
Htc One M7 - Qualcomm HS-USB Qdloader 9008 - Brick
Phone will not turn on...
power + vol up (not work)
power + vol down (not work)
power + vol up and down (not work)
Charge led (not work) (Pc usb 2.0 - usb 3.0 and normal charge)
home and back light (not work)
Just pc device manager "Qualcomm HS-USB Qdloader 9008" mod activated....
My system Windows 8.1
Click to expand...
Click to collapse
I got the same problem with stock RUU, when trying to repair booting in recovery

Help.....
Hi there.
I am trying to breath life back into my HTC M7,
I have gotten as far as running revive file, but it asks for a phone password.
is there anyway around this - i dont know of any password on this phone.
Help please.

Hello!
The same problem with my M7. Qualcomm HS-USB Qdloader 9008,
I got it in such a way that I was not known with him! The idea was updated by air.
I'm ready to try to raise it via Linux, BUT !!!
Nowhere can I download the required archive, everywhere or deleted or broken links.
Share the archive under Linux if you do not mind PLEASE !!!!

Scorpion23 said:
Hello!
The same problem with my M7. Qualcomm HS-USB Qdloader 9008,
I got it in such a way that I was not known with him! The idea was updated by air.
I'm ready to try to raise it via Linux, BUT !!!
Nowhere can I download the required archive, everywhere or deleted or broken links.
Share the archive under Linux if you do not mind PLEASE !!!!
Click to expand...
Click to collapse
https://mega.nz/#!ZIkFzBCK!utAywqcT64EStjGyQHfqarE8iE1rcoTkQuH5FCYXJCc
Will only work if your phone went in QHSUSB mode after flashing something bad. If your phone went in this mode by itself, it will not work.

Will only work if your phone went in QHSUSB mode after flashing something bad. If your phone went in this mode by itself, it will not work.
Click to expand...
Click to collapse
Thank you so much. I will try. As far as I know, the body left in the down after the update by air. There is no more information. The former owner does not know what is Ctrl + Alt + Del so, the option that there is poured something unnecessary disappears) Only an update on the air. Let's hope for the best)

alray said:
https://mega.nz/#!ZIkFzBCK!utAywqcT64EStjGyQHfqarE8iE1rcoTkQuH5FCYXJCc
Will only work if your phone went in QHSUSB mode after flashing something bad. If your phone went in this mode by itself, it will not work.
Click to expand...
Click to collapse
i bricked it by wrong software ..
how can i use this software .. is there is any manual ?

aamszia said:
i bricked it by wrong software ..
how can i use this software .. is there is any manual ?
Click to expand...
Click to collapse
Guide is linked at post #2

alray said:
Guide is linked at post #2
Click to expand...
Click to collapse
will this be working on windows or Ubuntu ?

aamszia said:
will this be working on windows or Ubuntu ?
Click to expand...
Click to collapse
Ubuntu

QHSUSB_BLUK on LG D415

Hi. I have some huge problem with my LG D415. It doesn't boot any more. When I plug it into my computer, it just shows QHSUSB_BLUK in device manger..Can someone help me please ?

wesson12 said:
Hi. I have some huge problem with my LG D415. It doesn't boot any more. When I plug it into my computer, it just shows QHSUSB_BLUK in device manger..Can someone help me please ?
Click to expand...
Click to collapse
You have your phone bricked, check my guide here: http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429

neverdies said:
You have your phone bricked, check my guide here: http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Click to expand...
Click to collapse
This guide didn't help me at all...The Qualcomm driver (Qualcomm HS-USB QDLOADER 9008(COM3) is installed but the b2b tool can't find it. It is saying the phone is not in DLOAD Mode

wesson12 said:
This guide didn't help me at all...The Qualcomm driver (Qualcomm HS-USB QDLOADER 9008(COM3) is installed but the b2b tool can't find it. It is saying the phone is not in DLOAD Mode
Click to expand...
Click to collapse
Did you choose the right Com Port(3) in b2b?

neverdies said:
Did you choose the right Com Port(3) in b2b?
Click to expand...
Click to collapse
YEs I did ..

Hard Bricked 4x

Hi,
I have a following problem with my Redmi 4X. I tried to flash new rom and reboot my phone on twrp. When the phone shut down nothing happens anymore just black screen. No fastboot or recovery mode. When I contact the phone to Windows pc it shows in device manager: Qualcomm HS-USB Diagnostics 900E (COM20). I have tried to flash new rom with QFIL and Miflash (tried to change the driver to Qualcomm HS-USB QDLoader 9008).
With QFIL the error is: Download Fail: Switch to EDL FailFailed to switch to Emergency Download mode.
With Miflash the error is: Cannot receive hello packet. MiFlash is trying to reset status!
Any suggestions?

https://www.youtube.com/watch?v=uxrhJkSZc6E

Already tried that. Doesn't seem to change a thing.

Shouldn't it turn the driver to "Qualcomm HS-USB QDLoader 9008" after test point method?
This is what shows in command prompt:
C:\Windows\system32>adb reboot edl
error: device '(null)' not found
C:\Windows\system32>adb devices
List of devices attached
C:\Windows\system32>

k4rpp4 said:
Shouldn't it turn the driver to "Qualcomm HS-USB QDLoader 9008" after test point method?
This is what shows in command prompt:
C:\Windows\system32>adb reboot edl
error: device '(null)' not found
C:\Windows\system32>adb devices
List of devices attached
Click to expand...
Click to collapse
After the test point method you will see a new "9008" device in the Device Manager.
Then all of the above commands will be completely irrelevant and useless.
In the 9008 mode use MiFlash, not QFIL/QPST, to reflash your phone.
Cheers!

The test points seems to change nothing. I think that after the " adb devices" command I should see my device listed but that is not the case and therefore impossible to flash rom. Somehow I should be able to change the "900E mode" to "9008 mode" without changing the driver manually and I think the test point method should do just that.

Here is video of what I have tried to do. If someone could point out what to do differently to get the flash work I would be very grateful.
https://drive.google.com/open?id=1aOkb3FCBzanMUW3WSdyuxyQO-33rdsBv

Windows 10 will not accept the 9008 driver because the driversignature ist not signed from Microsoft.
If you will unbrick it with Windows 10 64bit look here: https://www.youtube.com/watch?v=2d8KEruHWPg
and here: https://www.maketecheasier.com/install-unsigned-drivers-windows10/

Had allready done that also. Gave it another try without success

k4rpp4 said:
Had allready done that also. Gave it another try without success
Click to expand...
Click to collapse
Is the Qualcomm 9008 driver now installed?
Did you start the mi-flash tool with administrator privileges?

I installed the Qualcomm drivers but device manager still shows 900E driver unless I manually change it to 9008.
edit:
I finally succeeded with test point method. Now flashing. Im so grateful to you ConradB.

k4rpp4 said:
I installed the Qualcomm drivers but device manager still shows 900E driver unless I manually change it to 9008.
edit:
I finally succeeded with test point method. Now flashing. Im so grateful to you ConradB.
Click to expand...
Click to collapse
Perfect :good:

Bro please help my device in bricked

k23m said:
After the test point method you will see a new "9008" device in the Device Manager.
Then all of the above commands will be completely irrelevant and useless.
In the 9008 mode use MiFlash, not QFIL/QPST, to reflash your phone.
Cheers!
Click to expand...
Click to collapse
Thank you buddy .. Your 4 years old post help me to turn on my hard brick redmi 4x.
I don't know the actual reason of hard brick but The situation was my phone was in condition like
1. Possible to go in fastboot mode
2. When turning on there is only mi logo for fraction of second.
I tried test point method as described . It turned on in one attempt..I just want to add something. I face some issues after test point flashing . So I just flash miui again . Then It's working perfectly fine. After Test point flash check your battery. Maybe fully drained. Just charge it and turn it on..
I am posting this just for Information..

sayan990 said:
Thank you buddy .. Your 4 years old post help me to turn on my hard brick redmi 4x.
I don't know the actual reason of hard brick but The situation was my phone was in condition like
1. Possible to go in fastboot mode
2. When turning on there is only mi logo for fraction of second.
I tried test point method as described . It turned on in one attempt..I just want to add something. I face some issues after test point flashing . So I just flash miui again . Then It's working perfectly fine. After Test point flash check your battery. Maybe fully drained. Just charge it and turn it on..
I am posting this just for Information..
Click to expand...
Click to collapse
I do had same issue with my mobile but even when I tried to flash MIUI I got "ACK count don't match" attached img

Stuck in EDL mode (I guess ?)

I tried to flash through EDL mode with this method:
https://forum.xda-developers.com/rog-phone-2/how-to/how-to-unlock-rog2-phone-via-edl-mode-t4008267
Turned out it didn't work, but now I'm stuck on a black and non-responsive screen wich I guess is EDL mode. Physical keys doesn't work either.
So I tried this repair method:
https://forum.xda-developers.com/rog-phone-2/how-to/repair-rog2-phone-edl-modeofficial-t4012175
to no avail. PC sees the phone, but the flashing fails.
Is there a way out of here ?

Ok so that's Vol-/Vol+/Power to get out.

duck from space said:
Ok so that's Vol-/Vol+/Power to get out.
Click to expand...
Click to collapse
HAHAH. thanks. i was in same situation

same here
apollo3x said:
HAHAH. thanks. i was in same situation
Click to expand...
Click to collapse
same here
i hope someone give us a solution with this problem

bxujayz said:
same here
i hope someone give us a solution with this problem
Click to expand...
Click to collapse
Just follow what the guy above said. That's the solution man.

Same here

Stuck in EDL mode
Im in EDL mode and cant reboot the phone, anyone know how to reset?
Device manager picks it up as Qualcomm HS-USB QDLoader 9008 COM 4

Vol-/Vol+/Power isnt working for me, do you just press each button in that order or hold them down?
Update: I held down all three buttons for around 30 secs and the bootloader popped up.
Thanks.

Question Zenfone 8 bricked

Hey everyone,
yesterday my zenfone 8 just shutdown without any sign of a problem before . i thought its nothing but since then it dosnt turn on !!!
my only hope is when i connected it to my pc i got qualcomm 900e , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update.
but still no fastboot no nothing.
i understand there is a way with qfil tool but i dont know how to get the files for it. any help please???

i see that qfil can fix it with rawdata and patch0 but i dont have this files. can some one please help???

You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip

AzimBahar said:
You can get it on ROMdevelopers
QFIL / UnBrick - QMSCT_ForCSC_DefaultFuseLock_Sake_30.02.46.108_repkg.zip
Click to expand...
Click to collapse
Hey azim , i downloaded the files but it seems it knows that i am on 900e even when i tries to use other drivers to be 9008. can you please assits how to get out of 900e?? btw i managed to get the files out of my device but sahara server failed because of 900e :/

Connect phone to pC using test point and follow guides

Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip

AzimBahar said:
Trigger device to 9008 mode-
1. Remove USB cable and battery (Change a new chipset, UFS
should be empty)
2. Connect the battery
3. Device will boot into the emergency download mode
4. Confirm that the device manager has detected “Qualcomm HS-
USB QDLoader 9008 (COM x)”.
& Its may help too
ZS590KS_Keybox_Keymaster_HDCP_Online_Tool_M1220.zip
Click to expand...
Click to collapse
I dont understand what i need to do . I even tried with edl cable but still stuck on 900e

Once try to uninstall USB Driver & install ASUS QCOM Driver.
As you said , i managed to change it to Qualcomm HS-USB QDLoader 9008 with driver update
Click to expand...
Click to collapse
After try again !
Note - You May use EDL Cable for EDL mode !

AzimBahar said:
Once try to uninstall USB Driver & install ASUS QCOM Driver.
After try again !
Note - You May use EDL Cable for EDL mode !
Click to expand...
Click to collapse
I tried with edl cable... Only test point left to find

duduhayo said:
I tried with edl cable... Only test point left to find
Click to expand...
Click to collapse
sir i have the same issues, are you know the test point right now?

Kiyori said:
sir i have the same issues, are you know the test point right now?
Click to expand...
Click to collapse
Hey, i wish. No one found it, I am still waiting for the one