Hello friends,I recently noticed that vibrator of my phone
(Tancent version with WW ROM pre installed ) is not working.i tried the hard reset and SMMI vibration test but its not fixed.i think this happened after the update .98 on oct 30.
Please reply if any one know the solution
Related
Hi guys...
I've a problem (and i think i see this problem with same reasons on other problem that mine)
However, i tried each of ROM on my GS device, and each ROM working perfectly in first time, but after i saw any sensors are not working. Accelerometer, commpass, light sensor etc.
If you clikc the link (please see top) you can see my Voice Call problem, i think this problem is same this (so light and nearrest sensor not working and so my screen is not turn to on (lighting)
Anybody have an idea?
I was remember only one detail;
I installed SBL version of this firmware without check Phone Bootloader Update... and i think works fine...
But later i installed same version but with check Phone Bootloader Update...
Some professionals are there ? I think if this is an bootloader problem, how i can get my clear bootloader with JVK, if not what is the problem?
I don't know why but...
I reinstalled the JVK / SBL version, with out Phone Bootloader Update check (so noy checked).
Now all sensors are works perfectly...
I think, problem is checked Phone Bootloader Update
or
Rooting with CF JV1
I'm not sure so i'm very tired, i can't install and crash my device again
Hi? sorr for my eng.
Trouble:
i replaced the sens keys with mic and vibro, on phone fw was 4.1.1, key is work well, but after 2 day keys (back and home) don`t working hardware key - work ok.
What i do:
1. change fw to 2.3.5 and *#*#2663#*#* - when i do touch key fw update - phone go to reboot
2. change fw to 2.3.3 and *#*#2663#*#* - phone - faild to update
3. change fw to 2.2.1 and *#*#2663#*#* - phone - cycling and nothing to do ((
problem solved. Close
rmsul said:
Hi? sorr for my eng.
Trouble:
i replaced the sens keys with mic and vibro, on phone fw was 4.1.1, key is work well, but after 2 day keys (back and home) don`t working hardware key - work ok.
What i do:
1. change fw to 2.3.5 and *#*#2663#*#* - when i do touch key fw update - phone go to reboot
2. change fw to 2.3.3 and *#*#2663#*#* - phone - faild to update
3. change fw to 2.2.1 and *#*#2663#*#* - phone - cycling and nothing to do ((
Click to expand...
Click to collapse
how??
rmsul said:
problem solved. Close
Click to expand...
Click to collapse
Hi,
this sounds like my problem.
I have it on 2.3.6 after replacing the keypad because of water damage and wrong cleaning off the home-button...
I am searching for a solution quite a long time.
It would be great if you could post the problem solution here.
Thanks a lot.
nears said:
Hi,
this sounds like my problem.
I have it on 2.3.6 after replacing the keypad because of water damage and wrong cleaning off the home-button...
I am searching for a solution quite a long time.
It would be great if you could post the problem solution here.
Thanks a lot.
Click to expand...
Click to collapse
:victory: :victory: :victory: :victory: :victory:
yeahaa... after 3 days of testing and testing i finaly made it ....
Well the trick with *#*#2663#*#* works only on froyo and not on any other stock rom...
So just get Froyo and after flashing it do a full wipe within the recovery menu. Afterwards boot and enter *#*#2663#*#* and update the TouchPad FW.
greets nears
Anxious to try FroYo
Same thing happened to me a week ago, the four touch keys across the bottom of my T989 suddenly stopped working for no apparent reason.
When I bought my T989 in Nov2011, I got it from a guy who bought it for his son, but his son decided he wanted an iPhone instead, so it was brand new BUT already rooted (juggernaut v3.1, CMR). It was running flawlessy until now. I hadn't done anything to it and was still running the same rom.
Over the past week I've gotten up to speed and I wiped it and flashed stock ICS 4.0.4 UVLH1 rom after which the keys functioned normally UNTIL Kies said there was newer firmware, and so I updated to that. I tried wiping and reflashing ICS in hopes the keys would work again and skip the Kies update, but this time the keys didn't work at all. I've had the phone apart to examine the hardware and (without removing the screen) everything appears perfect. I am still holding out hope that it's a software thing, not a hardware thing.
I tried the *#2663# code trick and pressed the "Touch Key FW Update" button, but it just stayed busy for the four hours I let it grind away (obviously not working).
So, noob question, does anyone know where I could find a stock Froyo rom for the T989? I've only seen it for the T959. I really want to try this and see if it gets my touch keys working again.
Thanks in advance.
hello:
yesterday i flashed g920t with kies , it updated to latest firmware , G920TUVU4EPF1, i think
the touchscreen become left-right inverted , like if i touch left side , it respons on right side of screen ...
i tried to downgrade but it seems couldn't be done ,even the TWRP recovery has same problem that touchscreen is inverted...
any help please ?
never mind , problem solved.
solution post here in case anyone else who run into same problem.
1.back to stock rom
2. in call dial, press *#2663#
3. press TSP FW update (General)
Hi, I broke the display, bought a new one on aliexpress.
Installation succeeded. The display worked.
The phone asked for an update (Some version of Android 9, probably the penultimate before Android 10), which I did. After booting, but did not working touch screen ..
I did the factory settings, but that didn't help.
I didn't deal with the phone for some time, I thought that another system update would fix the bug.
Yesterday the phone got an update to Android 10, I installed it here, made the factory settings. But the touch screen still doesn't work. (I control the telephone via the OTG adapter)
I read how to do a downgrade, but by doing an update on Android 10, I about closed the option that is described here . https://forum.xda-developers.com/nokia-7-plus/how-to/finally-downgrade-phone-official-t3849437
I read a lot of discussions and came to the conclusion that I probably bought the wrong display.
Or is there a solution? Downgrade system? Upload another touch panel firmware?
Now this is on the phone Touch panel firmware version: 07 Goodix-V1.017.20.
I attach a photo display, it might help something.
Is there any way to identify my touch problem?
Thank you for any help
Hi i need help desperately from the experts her e.
After updating to global 12.5.8 miui the phone front showbox camera not working, no sound at all, not even in bluetooth and headphone jack. Most annoying thing is the youtube video maxed out at 720p. Even in youtube vanced. speed test
Very weird problem.
I flashed sweetin 12.5.9 miui but still the problem remains same.
Can anybody help me out please?
I have the same issue. Still waiting after 7 days to unlock boatloader and downgrade the stock rom to 12.0.1 and I hope it will fix the problem.
paulolols24 said:
I have the same issue. Still waiting after 7 days to unlock boatloader and downgrade the stock rom to 12.0.1 and I hope it will fix the problem.
Click to expand...
Click to collapse
Do you solve this problem?
i started having issue with my camera after 12.5.9 update my default miui camera app would close after clicking one photo although it was working in other camera like snapchat or fj camera. But few days after 12.5.10 update both front and back camera completely stopped working.
I unlocked my bootloader to downgrade the rom or flash custom rom as this seemed like a software issue . But after a week when i downgraded to my surprise the issue was still there which implies that the camera hardware has failed . So i dropped the idea of installing custom rom and instead went to service center, now they are replacing the motherboard as its hardware issue . I am gonna get back my phone today from service center so will update you guys accordingly .
Blog Link - This is the blog link which discusses about same problem even xiaomi has accepted the issue.
Its weird that software update can cause hardware bug but what i think is that with the update kernel setting might have been changed which can cause over voltage to camera module or something. Its my wild guess i don't have much idea about it . I would love to know it from experts out here .