I got this case today & It's AMAZING! It's really high quality & feels good in the hand. It also makes back of the phone look good! That texture is amazing! With this case there is no camera bump anymore, it's perfectly aligned. Cuts are precise, it leaves a bit of space for holes, which is good. Phone is a bit thiccer, but it's not an issue for me. I didn't notice any weight increase subjectivily when holding it in the hand. I paid for it 17 euros which is quite expensive but it's worth it. You can get it a bit cheaper through AliExpress.
Highly recommend it!
Pictures:
https://drive.google.com/file/d/1ctcNOXX5JUi7YGFGodYUnPgxkl_a1zed/view?usp=sharing
https://drive.google.com/file/d/1oJj4JI0hcxHgYOQXrq0J9ybVufAp3Mqg/view?usp=sharing
https://drive.google.com/file/d/1Hom6En696KrW08pv8Mo3mv9JEp-2utWy/view?usp=sharing
Not to rain on your parade but that case is terrible, I bought it and got a refund on it not 2 days after.
It's textured sure but it's not rubber texture but plastic texture, meaning it'll slip from the table to the floor more times than you can count, I managed to break my tempered glass because the phone slid from the table to the floor because the case isn't grippy. You're better off with the case the phone came in, at least it isn't slippery. Or get a Spigen case like I did, they got released this week.
Also, I bought it for 7 euros on Aliexpress, how did you paid 17?
Yepi69 said:
Not to rain on your parade but that case is terrible, I bought it and got a refund on it not 2 days after.
It's textured sure but it's not rubber texture but plastic texture, meaning it'll slip from the table to the floor more times than you can count, I managed to break my tempered glass because the phone slid from the table to the floor because the case isn't grippy. You're better off with the case the phone came in, at least it isn't slippery. Or get a Spigen case like I did, they got released this week.
Also, I bought it for 7 euros on Aliexpress, how did you paid 17?
Click to expand...
Click to collapse
Well, there is no free shipping on Aliexpress for Serbia so there is that. Case is not slippy at all imo, it didn't move when placed on table. I looked for Spigen case as I heard they are good quality too but it's not avaliable here, so yeah. I think I read your post somewhere for Nillkin regular case, not this one containing the same issues you described. I could be wrong there.
I used Nillkin case back on Samsung Galaxy S3 Neo & it was also really good. They were very popular back than so that's why I decided to buy Nillkin case.
SkaboXD said:
Well, there is no free shipping on Aliexpress for Serbia so there is that. Case is not slippy at all imo, it didn't move when placed on table. I looked for Spigen case as I heard they are good quality too but it's not avaliable here, so yeah. I think I read your post somewhere for Nillkin regular case, not this one containing the same issues you described. I could be wrong there.
I used Nillkin case back on Samsung Galaxy S3 Neo & it was also really good. They were very popular back than so that's why I decided to buy Nillkin case.
Click to expand...
Click to collapse
Seems the one you bought is cloth based, mine was hard plastic. Nillkin does produce good cases but the one I got was such a disappointment.
I have a Nillkin Frosted Glass plastic case on my Poco X3, it's my fifth phone so far with that case. It's pretty good, although the white ones tend to get... not white very soon.
Is it higher around the camera to protect it?
SykoraLukas said:
Is it higher around the camera to protect it?
Click to expand...
Click to collapse
Yes
I bought this case at aliexpress. The quality looks good. All holes are cut-out perfect
However, I don't like this case. It feels hard. And I hate the texture on the back side. Due to the texture small dirt particles sit between the dots. They don't go away with a fast wipe. The cut-out for the camera is a circle. Spigen uses a rounded rectangle which I prefer.
Sorry to say, but I really don't like this case. It feels just not smooth. The backside feels like sandpaper. Unpleasant to touch or hold the phone.
A member above said the case slips easily around. Like a ice cube. I can't confirm that. Actually it has a good grip on different surfaces.
That's all personal preferences. What I hate, others may love. As I said, quality looks great.
I'll get my spigen case in a few days. I know them from my old phones. Can't wait.
SkaboXD said:
I got this case today & It's AMAZING! It's really high quality & feels good in the hand. It also makes back of the phone look good! That texture is amazing! With this case there is no camera bump anymore, it's perfectly aligned. Cuts are precise, it leaves a bit of space for holes, which is good. Phone is a bit thiccer, but it's not an issue for me. I didn't notice any weight increase subjectivily when holding it in the hand. I paid for it 17 euros which is quite expensive but it's worth it. You can get it a bit cheaper through AliExpress.
Highly recommend it!
Pictures:
https://drive.google.com/file/d/1ctcNOXX5JUi7YGFGodYUnPgxkl_a1zed/view?usp=sharing
https://drive.google.com/file/d/1oJj4JI0hcxHgYOQXrq0J9ybVufAp3Mqg/view?usp=sharing
https://drive.google.com/file/d/1Hom6En696KrW08pv8Mo3mv9JEp-2utWy/view?usp=sharing
Click to expand...
Click to collapse
Hi,
I ordered this case, I paid 11.45 USD only, it might be more expensive than other cases here, but after I bought a cheap case I decided that I won't waste money on cheap useless cases anymore, so I searched and found Nillkin is the most popular.
I have a question though, if you please...
Do I have to remove the case every week to clean the dust that go inside, like other cases?
Thanks in advance
Mysteryagr said:
Hi,
I ordered this case, I paid 11.45 USD only, it might be more expensive than other cases here, but after I bought a cheap case I decided that I won't waste money on cheap useless cases anymore, so I searched and found Nillkin is the most popular.
I have a question though, if you please...
Do I have to remove the case every week to clean the dust that go inside, like other cases?
Thanks in advance
Click to expand...
Click to collapse
Only around the camera. But that can be blowed outside. It's very good protected.
SkaboXD said:
Only around the camera. But that can be blowed outside. It's very good protected.
Click to expand...
Click to collapse
I found a better one which protects the camera, I received it today, hard case feels smooth in my hand, everything is fine except that the edges need to be higher than the screen a lil bit more to protect it, unfortunately it is not; after I installed the case I noticed that my screen protector tempered glass is higher than the case edges.
Mysteryagr said:
I found a better one which protects the camera, I received it today, hard case feels smooth in my hand, everything is fine except that the edges need to be higher than the screen a lil bit more to protect it, unfortunately it is not; after I installed the case I noticed that my screen protector tempered glass is higher than the case edges.
Click to expand...
Click to collapse
agree with you... I also use this case... and somehow my POCO became more light in my hand
Related
I ordered this on ebay after watching the video on youtube.
http://www.youtube.com/watch?feature=player_embedded&v=9RaUUN1Pgh4
I have to say I'm pretty impressed with it. Very unique design. It's hard, and rubberized to so you can keep a good grip on it.
It's not cheap, I paid about 60 bucks USD for it. Check it out, you guys might like it., I know I do!
Cheers!
Thank you for that! Bit bulky, but has cool features. Please give us an update when it arrives.
Same here. Too bulky and cheaplooking for my taste.
Sent from my GT-P1000 using XDA App
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Love the kickstand.
Sent from my GT-P1000 using XDA App
bisto321 said:
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Click to expand...
Click to collapse
I have the same case in pink and love it, but I got it at daydeal dot com.
Sent from my glorious Galaxy tab
bisto321 said:
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Click to expand...
Click to collapse
I bought the 2nd case for my Galaxy TAB and it's exactly the same case like yours except with white side.
It's cheap but it's good.
The case posted by Big_Totoro is good but, kinda worried the front lid with standing stoppers
which might eventually create marking or scratches on Galaxy TAB screen.
I'm using Incipio Silicrylic with kickstand. It is very nice and rugged. The kickstand kind of sucks but I contacted Incipio and they are going to work something out. Kickstand aside, the case is nice and heavy duty without adding much bulk.
I ordered this case in black just over a week ago and it arrived today. Brilliant fit, barely adds any weight while the device feels fully supported. The different prop positions are also great. My only concern was that it wouldnt fold back on itself to allow good usage one handed, but it a actually folds back on itself really well.
Sent from my GT-P1000 using XDA App
Got mine
It isn't really very bulky. compared to a 3mm rubber skin yeah it is, but that isn't going to give you any protection anyhow
The rubberized outside is very grippy. Easy to hold in one hand without the fear of slippage.
The "stand" parts don't contact the screen at all when closed. It might if you have pressure applied to it, but again, it is soft rubberized finish on those stant peices as well on the inside.
The fit is brilliant. Leaving all the external buttons accessible. The front cover folds back easily, and don't fold over on itself at all.
It feels very sturdy and rugged. Not cheap feeling at all.
Just goin to touch on the "bulkiness" topic again briefly. Most leather or PU leather cases I have looked at at alot bulker than this case. While that MAY off a little more padding, I have noticed that most of those leather cases, the clasp interfers with the view of the screen.
Just my 2 cents
Cheers guys!
Thank you. I haven't found a retailer in Europe though. I hope this will change.
Sent from my Galaxy Tab via XDA DEVS app
bisto321 said:
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Click to expand...
Click to collapse
The first peice of accessories for my Tab looks wonderfull I like it , price is fair
Got the same hard case in black, OP said rubberized finish, though mine is more like a textured finish, not sure if there are 2 types?
looks a little plasticy?
sjjones said:
looks a little plasticy?
Click to expand...
Click to collapse
Yes, certainly not what I would call rubbery or soft-touch. I haven't heard back from the seller yet.
Mine is Black as well. I guess we have a difference of opinion on what rubbery feel is
Its hard plastic with a rubberized coating. I dont know how else to explain it. Its not silicon rubbery or so rubbery that it would rub away.
Its not squishy, but its definatly not slippery. So there is a ruberized coating on it.
Sent from my SGH-T849 using XDA App
just got my GT for a week, i saw this case on "yeebay"
will order one during or after the xmas/NY holiday, so i'll receive it as soon as the post office people start working.
Just an update, it turns out that there are 2 versions - the GLARE is not rubberized. I bought this for ~$40 from the seller. According to the seller, this cost less than the rubberized and it made sense cause he is selling the "other" version for ~$60. But when I went back & look at the item # I bought from (he still has units selling under the same item #), the price has gone up to ~$60.
I think the case is fine as is and will not spend return shipping & extra $60 to get the rubberized finish, just put that towards a leather case instaed.
Hi Big_Totoro,
How did you find it at Ebay? I've no idea how it is called or who build it (Manufactor). I was not able to find it anywhere in the web. Can you give me a hint?
Merry Christmas to all people out there!
I bought one of these too and absolutely love it. The fit is perfect, the ergonomics are fantastic (someone has spent a lot of time thinking about how this will be used so it supports all positions), it provides great protection, and the rubberised surface feels great.
I reckon this is the best case I have bought for any device- most useful, and if anything the device feels smaller to me in the case- an illusion obviously, but a testament to the quality of it.
I bought a few cases for my tab, but this is the only one that I will be using
These cases look amazing and I'm interested in to getting the Nillkin one which is made for the i9023 Nexus S, but is it really just for looks? I don't want to get this case if it doesn't protect my phone from a simple drop while walking on the street. I've watched and heard many good reviews about how the case looks and feels, but how good is it protection wise? Thanks.
It's common sense that a case is there to protect the phone. Even though in this case (pun intended) you cannot expect it to offer the protection of some other bulky alternatives, it's still better than nothing. As long as the sides protected by the nillkin hit the ground first I believe you should be ok.
I ordered it about a week ago, should be here in one or two weeks and I'll be able to provide a more hands-on opinion.
Flukzr said:
It's common sense that a case is there to protect the phone. Even though in this case (pun intended) you cannot expect it to offer the protection of some other bulky alternatives, it's still better than nothing. As long as the sides protected by the nillkin hit the ground first I believe you should be ok.
I ordered it about a week ago, should be here in one or two weeks and I'll be able to provide a more hands-on opinion.
Click to expand...
Click to collapse
Ehh.. Can't resist the temptation. After reading some more reviews from the G2x Thread and the Nexus S post I think I'll get it..
I've always been a fan of rubbery/TPU cases myself. Most hard cases I've used in the past pop right out when dropped and those "light" hard cases don't protect your phone on all sides.
Dunno, just seems a bit light on the protection in the end and more expensive than TPUs.
I really like this incipio feather. Its hardly noticeable.
OK so my Nillkin case finally came. I didn't expect much since in the past I bought some other products made to look like other product (ripoffs). Thought this was the case with this and the Incipio Feather. I'm happy to say that it I was wrong.
It adds very little bulk to the phone, and has a snug fit. It feels much better in the hand, due to the rubbery finish, and the cutouts are exactly where they should be.
The screen protector bundled is acceptable although as I was previously aware, due to the curved screen there is a small gap on all sides and the top and bottom does not stick very well. There probably are are better ones out there but I'm happy with it.
I'm not into the habit of dropping my phone so the minimal protection it offers is enough for me. If you are looking for a case to withstand minimal impact, prevent scratches an look awesome I do not believe there is a better alternative for the i9023.
Flukzr said:
OK so my Nillkin case finally came. I didn't expect much since in the past I bought some other products made to look like other product (ripoffs). Thought this was the case with this and the Incipio Feather. I'm happy to say that it I was wrong.
It adds very little bulk to the phone, and has a snug fit. It feels much better in the hand, due to the rubbery finish, and the cutouts are exactly where they should be.
The screen protector bundled is acceptable although as I was previously aware, due to the curved screen there is a small gap on all sides and the top and bottom does not stick very well. There probably are are better ones out there but I'm happy with it.
I'm not into the habit of dropping my phone so the minimal protection it offers is enough for me. If you are looking for a case to withstand minimal impact, prevent scratches an look awesome I do not believe there is a better alternative for the i9023.
Click to expand...
Click to collapse
Thanks for the review, think I'll buy this one.
I've been using a Incipio Feather and I'm loving it!
Hey, do you have a link for that Nillikin case? Bc I went on their website and I didn't see anything.
tase25 said:
Hey, do you have a link for that Nillikin case? Bc I went on their website and I didn't see anything.
Click to expand...
Click to collapse
Look around on obostore.com. I decided last minute that I wasn't going to get this case, but get the silicone and TPU cases from Nillkin. Anyone have either of them(Nillkin Silicone/Nillkin TPU)?
Got a Nillkin lately which is OK. Wondering though how does it compare to Incipio Feather in terms of thickness. Which one makes it more bulky ?
BTW, wondering any frame cases for NS...
Quite like the look of the Case-Mate. Seems like a good balance of protection without adding to much bulk to the device.
The thin cases like these really do help... although they look skimpy they have saved my Nexus a few times. I dropped it down the stairs the other day and not a scratch. If it didn't have it on there I don't know how smashed up the back would have been...
Hello has anyone managed to find a cheap case. Am not after anything flashy. Just need something that can protect the camera when placed on the surface, table etc. If you have found something please share.
Here you go: http://www.amazon.com/s/ref=nb_sb_s...edge+case&sprefix=galaxy+s6+edge+case,aps,342
Soft TPU back for $4.49 http://www.amazon.com/dp/B0109Z0USC
Hard plastic back for $5.39 http://www.amazon.com/EasyAcc-Transparent-Protector-Shockproof-Resistant/dp/B00XN2RWY4
I'm using this $6 case: http://www.amazon.com/Leesentec-Squared-Samsung-Resistant-Absorption/dp/B00WNTIYV8/
plenty of them on ebay, just get a cheap tpu
come here http://www.cowcow.com/custom/hardenamel
and use this code for 1$ phone case.
Phonecase1dollar
Have no idea what price would be the one for you ? $1, $5 or less than $10 ? Anyway, S6 edge is a high-end device and it's no good to have it protected with a $1 which seems cheap and poor, no sense at all..
http://www.ebay.com/itm/201368426957?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT $2 ( clear view, cheap, get the job done)
http://www.ebay.com/itm/251865009225?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT $12 ( better protection)
diztronic makes a great case. been using for years and provides great drop protection and also allows use of headphone jack without removing case.
I just bought this one: http://www.amazon.com/gp/product/B00V44OZ6G?psc=1&redirect=true&ref_=od_aui_detailpages00
So I have been using the case I mentioned above for a few days and I am happy to report that this is a great case. It feels solid. Once I put the phone in the phone stays and doesn't move. Edges are easily accessible and the phone wont slip out of your hands. Overall the case feels very nice. I am not sure about actual protection, but thevmain point was to get something so the phone would be less slippery. So far the case does what its supposed to do.
Is this one cheap enough? http://www.amazon.com/S6-Edge-Case-Galaxy-Designed/dp/B016BSC2EQ
Bought this one for under a dollar
Love the protection that is also on the edges of the camera. Still using it since july 2015
http://www.ebay.com/itm/Hot-Soft-Si...967985?hash=item4aef18ecb1:g:yhEAAOSwMmBV1X8O
I'm using the Hama Crystal Cover.
The phone fitts better in my hand (more grip).
S6 Edge awesome case.
Just wanted to put this out there. I have a unicorn beetle case for my edge. I am a dropper. I've dropped my phone a thousand times. My phone bounces when I drop it. The edges of the case stick out farther than the screen and camera, and is rubbery, so it bounces, and the glass parts never touch the floor. It will only break if it lands on something sticking up, or hits a corner, or something like that. I've tried not to drop it, but I drop everything all the time and it's really aggravating! Get so angry at myself. Point is, I figured that I'm 41, so I should adjust to my clutsy self. I'm gonna drop stuff forever apparently. I paid around $25.00 for it, but it's great protection for this pricey phone. Kinda resembles an otter box. Doesn't block the edge screen either.
try this
I m using this one.
https://www.amazon.in/gp/aw/d/B00SV63URU/ref=ya_aw_od_pi?ie=UTF8&psc=1
Maybe you need a Tempered Glass Screen Protector, too.
devis said:
So I have been using the case I mentioned above for a few days and I am happy to report that this is a great case. It feels solid. Once I put the phone in the phone stays and doesn't move. Edges are easily accessible and the phone wont slip out of your hands. Overall the case feels very nice. I am not sure about actual protection, but thevmain point was to get something so the phone would be less slippery. So far the case does what its supposed to do.
Click to expand...
Click to collapse
Check this out, dude:ww w.ebay.com/itm/191776855391?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
You can find a lot on Aliexpress,but how can a poor quality case fits well and works perfect with your S6 edge?I have tried before,but disapointed in the end.Amazon provides more suprior goods.
MobileProtection said:
Check this out, dude:ww w.ebay.com/itm/191776855391?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Click to expand...
Click to collapse
Ah great... someone with 1 post asking me to buy their stuff.
LG made my favorite case for the N5 and it looks like they've made something similar for the 5x as well.
+The official LG Snap On case is hard, thin plastic with no lip and no button coverings. With my N5, it was nearly impossible to tell there was even a case on: it's just that thin.
-The only downside was due to not having a lip, the phone can shift around a tiny bit inside the case as the lip tends to hold the phone in place. It's also a bit expensive ($20-25).
I'll post some links I've found to buy the product here but most of mine are from sites that sell to Canada. Feel free to share any links you've found to buy the case in the US or other countries as well.
http://www.amazon.ca/LG-CSV140ACCAB...449846523&sr=8-2&keywords=LG+nexus+5x+snap+on
http://www.bestbuy.ca/en-CA/product...spx?path=322ebcd1197afd29b6c2f6bcc1108df9en02
http://www.ebay.com/itm/221956645496
http://www.amazon.co.uk/LG-CSV-140-...sr=8-1-spell&keywords=LG+Hardshell+Snap+On+5x
Thanks to @Infekxion for bringing this case to my attention.
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
bblzd said:
LG made my favorite case for the N5 and it looks like they've made something similar for the 5x as well.
+The official LG Snap On case is hard, thin plastic with no lip and no button coverings. With my N5, it was nearly impossible to tell there was even a case on: it's just that thin.
-The only downside was due to not having a lip, the phone can shift around a tiny bit inside the case as the lip tends to hold the phone in place. It's also a bit expensive ($20-25).
I'll post some links I've found to buy the product here but most of mine are from sites that sell to Canada. Feel free to share any links you've found to buy the case in the US or other countries as well.
http://www.amazon.ca/LG-CSV140ACCAB...449846523&sr=8-2&keywords=LG+nexus+5x+snap+on
http://www.bestbuy.ca/en-CA/product...spx?path=322ebcd1197afd29b6c2f6bcc1108df9en02
http://www.ebay.com/itm/221956645496
Thanks to @Infekxion for bringing this case to my attention.
Click to expand...
Click to collapse
ravichopra said:
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
Click to expand...
Click to collapse
Nice find. Looks like one of the "quick sand" type cases. Those are great too (I had one for my N5) though the official LG case was noticeably thinner and with no lip felt like there wasn't even a case on the device.
On the up side the quicksand cases have unparalleled grip, though some people might be thrown off by the rough texture.
ravichopra said:
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
Click to expand...
Click to collapse
Interesting looking case, I think this'll be #3 or 4 i've bought, I tend to accumulate cases until I find one I like. It's certainly cheap enough to be disposable if I don't like it.
Sweet. I remember this case well (in N5 forums) but never got one they were a pita to find for me So I got the ringke slim for the N5 still have it and phone. I've gone caseless on the 5X so far I really like it but my OCD makes me buy cases....
Does it scratch the phone in any way?
I used similar case for my n5 and I remember it scratches corners when I try to put it on/off
ubcjack said:
Does it scratch the phone in any way?
I used similar case for my n5 and I remember it scratches corners when I try to put it on/off
Click to expand...
Click to collapse
I actually never took that case off my N5 since it was easy to forget it had one on lol. I suspect the same will be true for this version. However I could imagine scratches being a possibility since thin hard cases tend to be quite tight and and difficult to remove.
There is a techniques I've seen used to help remove those types of cases safely using a taped credit card.
Any idea where can I get this in the UK? I got the official one from google but it's just too bulky for my liking...
EDIT: Just found it on amazon UK. Here's the link for anyone interested (white version also available!):
http://www.amazon.co.uk/LG-CSV-140-...sr=8-1-spell&keywords=LG+Hardshell+Snap+On+5x
Is this case as slippery as the phone? I normally have my phones naked but for the 5x it is slipping out of my fingers when trying to pick it up on the sides specifically and it has slid out of my pocket a few times.
Shieze said:
Is this case as slippery as the phone? I normally have my phones naked but for the 5x it is slipping out of my fingers when trying to pick it up on the sides specifically and it has slid out of my pocket a few times.
Click to expand...
Click to collapse
Ive yet to receive mine but if it's the same as with the N5 case, the matte plastic will be almost identical to the 5x plastic.
For something with more grip check out that quicksand case linked earlier in this thread. Or if you don't mind a bulkier case I quite like the Diztonic matte texture I've been using for the last couple weeks. It's your standard case size but very easy to pick up and put down, has a better texture for gripping, and no doubt will protect well in a fall.
This thin hardshell is more just to protect from scratches and minor bumps while not noticeably enlarging the size of the device.
I got my case yesterday and finally have a chance to upload some pics. It's a little bit thicker than the original but I enjoy it just as much. The caliper I used may need slight adjustments and the bottom edges gave me the best reading but you get the idea. I really like how there's no lip on this one either.
Infekxion said:
I got my case yesterday and finally have a chance to upload some pics. It's a little bit thicker than the original but I enjoy it just as much. The caliper I used may need slight adjustments and the bottom edges gave me the best reading but you get the idea. I really like how there's no lip on this one either.
Click to expand...
Click to collapse
Thank you. LG Logo looks removable. Is it?
Yes it is, doesn't look like it'll come out accidentally. It's a nice little accent that goes well with the imprint ring.
Sent from my Nexus 5X
Infekxion said:
Yes it is, doesn't look like it'll come out accidentally. It's a nice little accent that goes well with the imprint ring.
Sent from my Nexus 5X
Click to expand...
Click to collapse
It's enough to be removable. I'll consider to buy this one. Maybe the ice one. I don't know.
Has anyone found this in white for sale in the US?
Infekxion said:
I got my case yesterday and finally have a chance to upload some pics. It's a little bit thicker than the original but I enjoy it just as much. The caliper I used may need slight adjustments and the bottom edges gave me the best reading but you get the idea. I really like how there's no lip on this one either.
Click to expand...
Click to collapse
Is the official one scratching phone in anyway when you remove the case?
ubcjack said:
Is the official one scratching phone in anyway when you remove the case?
Click to expand...
Click to collapse
No scratches yet. I have a way of removing the case, same way with the old N5, hold phone with top end pressing into my waist and pry the bottom edges with my thumbnails. Slides off pretty easy. I recommend sitting down while doing it.
Sent from my Nexus 5X
ravichopra said:
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
Click to expand...
Click to collapse
is imak thinner than spigen one?
i have spigen case installed. but the spigen's lower left corner has space with phone... too bad....
btw imak is really cheap... only $3 in china, so i am afraid of the protection when phone fall from hands....
ourfear said:
is imak thinner than spigen one?
i have spigen case installed. but the spigen's lower left corner has space with phone... too bad....
btw imak is really cheap... only $3 in china, so i am afraid of the protection when phone fall from hands....
Click to expand...
Click to collapse
None of the thin cases are really designed to protect in a drop. More just for scratches and minor bumps.
They might help a bit but even a thick case is no guarantee to protect the device in a drop.
I've personally tried the Diztronic case which is less than $10. It's made from thicker TPU material with a lip that would offer more drop protection than these thin cases.
"My hand is pretty small - but the phone is very comfortable to hold. :3 ( with and without the fusion case. )
The case made the phone less slippery though. ( which is a good thing - as it is less likely to slip out of my hand, lol. )"
I haven't seen that many cases for this phone even on ebay or amazon. Just a handful... Which ones are you using? And how do you like them? Protection and appearance...
Havent found any good on amaxon either but if u like incepio u can check out there site they got like 4 available might be getting one.
Sent from my SM-T280 using Tapatalk
Ive moved from a z3 compact and I had the same leather case for 2 years. Great quality and decent leather. Afte comparing lots of phone sizes I took a slight risk getting this iPhone6 plus sized one
https://www.amazon.co.uk/gp/aw/d/B00NKFZYW6/ref=yo_ii_img?ie=UTF8&psc=1
Only point is I slide my Z play in downwards so it's easier to grasp when pulling it out.
I like that pouch man. Super classy. How's the fit? Is it too tight or loose?
I was expecting it to be slightly too long as the iPhone6 plus is bigger but it's perfect. After having one for my old phone the pouch never gets loose enough for it to fall out. Prefer these cases to open ones so the screen is protected as well.
Looks good man. I may pick one up! It's perfect for the off hours... I also need something for work tho.. I work in an industrial setting and while I'd love to have the phone naked I need something hardcore in case I drop it. I've seen the Incipio ones, I may get one of those I guess... You'd think with the battery life this phone has it would have been a more popular model. But it seems like not too many people are picking it up
Had to order a Nillkin case of Aliexpress, as decent cases arent available yet on local sites.
Recently ordered mine shock proof case in Ali Express
-----------------------
-UPDATE-
This is the case: https://m.pt.aliexpress.com/item/32745245264.html
It hasn't arrived yet, but I think it's pretty neat, the phone seems to fit right into the case, so it doesn't make it that extra bulky, but it doesn't also fit a Mod back there.
I don't use a case. I use protector from the Gadgetshieldz. They act as my primary protection.
http://www.gadgetshieldz.com/moto-z-play-screen-protectors-covers-cases.html
didn't use case only screen protector
Ended up picking this one up for now. Protects the camera well has a decent lip over the screen for a slim case and it's a sticky kinda rubbery plastic so it won't fly out of my hands at work. It was also nice and cheap with prime shipping.
https://www.amazon.com/dp/B01M4FL78Z/ref=cm_sw_r_cp_apa_gm9gybXDR75YJ
Are the leds in your flash of the same color/tone?
No they aren't. One is orange the other pale yellow...
Looks the same in the pics
You can see a slight difference in the first one. Color reproduction accuracy wasn't really a concern there haha
https://www.amazon.com/gp/aw/d/B01LYA7VK6/ref=yo_ii_img?ie=UTF8&psc=1
Nillkin hard shell. Protects everything except the forehead and chin edges.
Andrew
Has anyone bought this Case for Motorola Moto Z Play NILLKIN Super Frosted Shield Hard Back Cover case For Moto Z Force 5.5 inch With screen protector
http://s.aliexpress.com/mMrYbAnM
Does it protrct the camera ? Should I buy this?
Thank you.
Monkey D.Luffy007 said:
Has anyone bought this Case for Motorola Moto Z Play NILLKIN Super Frosted Shield Hard Back Cover case For Moto Z Force 5.5 inch With screen protector
http://s.aliexpress.com/mMrYbAnM
Does it protrct the camera ? Should I buy this?
Thank you.
Click to expand...
Click to collapse
Ordered it but it hasnt arrived yet, but from the looks of it there seems to be a lip around the camera bump so should offer some protection.
Angdvl089 said:
https://www.amazon.com/gp/aw/d/B01LYA7VK6/ref=yo_ii_img?ie=UTF8&psc=1
Nillkin hard shell. Protects everything except the forehead and chin edges.
Andrew
Click to expand...
Click to collapse
i'm looking for a case like this but would cover the top and bottom...
I ordered this case and tempered glass.
Both from Nillkin. I will review it as soon as I receive it.