Related
Anybody knows how to root realme C11 with Magisk?
Will this method work in this dvice?
https://forum.xda-developers.com/re...9-mediatek-t4149531/post83310015#post83310015
Mrinalsaha said:
Anybody knows how to root realme C11 with Magisk?
Will this method work in this dvice?
https://forum.xda-developers.com/re...9-mediatek-t4149531/post83310015#post83310015
Click to expand...
Click to collapse
Not tested but will work. If something goes wrong, you can flash you stock boot.img from fastboot.
To get stock boot.img
You can download stock rom from Software Update realme site and decrypt and convert .ozip to .zip with https://github.com/bkerler/oppo_ozip_decrypt
or
Go to stock recovery with power off your device and then hold Volume Down(-) + Power buttons same time to boot into recovery mode.
Connect device to PC, install drivers for realme and setup ADB & Fastboot Tools
Then run following
Code:
adb devices
adb root
adb pull /dev/block/platform/bootdevice/by-name/boot
Then your working directory in your PC will have stock boot image(rename it to boot.img from boot).
This a a simple guide on how to root realme c11 with magisk
Get boot.img from stock rom.
To patch boot.img
>Select Install
>Select Select and Patch a file
>Select stock boot.img in Magisk Manager app and place Magisk Patched boot.img from Downloads folder to PC then do below
>place magisk_patched.img and vbmeta.img in platform tools folder in your PC
}connect phone in fastboot mode, open Command window and run
>fastboot devices
>fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
>fastboot flash boot magisk_patched.img
>fastboot reboot
Finally Open Magisk Manager, do initial setup and then after reboot do magisk hide in Magisk Manager settings.
Bootloader of your phone should be already unlocked and usb debugging should be enabled before doing this
I have attached vbmeta.img and magisk_patched.img of RMX2185_11_A.79
Use my magisk_patched.img only if you are using RMX2185_11_A.79(check in software update)
Here is vbmeta ang magisk_patched.img for RMX2185_11_A.79
Gofile - Free Unlimited File Sharing and Storage
Gofile is a free, secure file sharing and storage platform. With unlimited bandwidth and storage, you can easily store and share files of any type without any limits. Our advanced features, such as CDN support and password protection, make Gofile the ideal choice for individuals and businesses...
gofile.io
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for OnePlus8T[kebab]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from PixelExperience website
Donate [*]UPI-ID:- [email protected]
[*]Paypal:- paypal.me/KakatkarAkshay
Translation
Help with project translation
Stay tuned
Our Telegram channel
Device Specified Telegram Group
Our blog
Android OS version: 11.0.0_r27
Security patch level: January 2021
Build author/Device Maintainer: Rohan Hasabe
Device Source code: https://github.com/PixelExperience-Devices
Kernel Source code: https://github.com/PixelExperience-Devices/kernel_oneplus_sm8250
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Updated 9/10/2021:-
* October Security Patch
* Clean Flash if you are coming from the last PE official build.
* Trees rebased over the latest LineageOS trees.
* Use PE recovery to flash the build.
Reserved
Flashed. Working fine. Fingerprint is working, included Gcam works well.
Hi will we get a step by step procedure? Thank you very much, great work as always
theincognito said:
Flashed. Working fine. Fingerprint is working, included Gcam works well.
Click to expand...
Click to collapse
how you install this??
Kindly update procedure to install this ROM.
Looking good! I'll try once my 8T arrives
For the KB2005/US version?
Downloaded this, the zip seems flashable, did you get TWRP working or are you flashing through a custom recovery?
I got "Insufficient storage space to upgrade" when install it via system update. Also I got "Resizing 'product_a' FAILED (remote: 'Not enough space to resize partition')" when I am trying to flash it via fastbootd.
manhong2112 said:
I got "Insufficient storage space to upgrade" when install it via system update. Also I got "Resizing 'product_a' FAILED (remote: 'Not enough space to resize partition')" when I am trying to flash it via fastbootd.
Click to expand...
Click to collapse
How are you exactly flashing through the fastbootd?
matteosaeed said:
How are you exactly flashing through the fastbootd?
Click to expand...
Click to collapse
There is a payload.bin inside the zip and you can just unpack it via payload_dumper.py.
New instructions to flash - NOOB Friendly:
1. Download the latest build
2. Download the latest platform tools, if you haven't already: https://developer.android.com/studio/releases/platform-tools
3. Extract the adb and fastboot drivers zip and add that folder to path (if you don't know how to add a path, google it)
4. Enable USB debugging via developer options on your phone and after that connect your phone via USB to PC
5. Extract only the recovery.img file from the ROM zip
6. Open a command prompt window where the extracted recovery.img is present, and enter the following one by one:
Code:
adb reboot bootloader
fastboot boot recovery.img
7.From the phone's recovery page, do the following:
Factory reset -> Format data/factory reset -> Format data.
8. Go back to recovery page from clicking back.
9. Select "Apply Update -> Apply from ADB"
10. From the command window already opened, sideload the rom using:
Code:
adb sideload <ROM>.zip
(Replace <ROM> with actual ROM file name)
11. If you want to root, after first boot, reboot to recovery again, select "Apply Update -> Apply from ADB"
12. Connect your phone to PC, open a command prompt window where Magisk zip is located, execute:
Code:
adb sideload <MagiskFileName>.zip
(Replace <MagiskFileName> with actual file name)
For updating, open a command prompt window where the new ROM zip is present, execute:
Code:
fastboot reboot recovery
, then follow steps 9-12.
Old instructions:
Spoiler
@GDZechariah @Moffei97 @firdoshakir @matteosaeed @manhong2112
The zip is flashable, but without the twrp, you can't flash that way.
Instructions to flash (noob friendly):
YOUR BOOTLOADER SHOULD BE UNLOCKED
1. Flash OOS 11 on both slots (Use local upgrade option/flash via fastbootd).
2. Check using this app if u have OOS on slot_b:-
https://play.google.com/store/apps/details?id=flar2.devcheck
1-2. (ALTERNATE WAY) - Flash OOS to slot_b via fastbootd and set the active partition as slot_b.
3. Download the latest Pixel experience ROM.
4. Download and install Python3 on your PC (TICK THE ADD PYTHON TO PATH OPTION):-
https://www.python.org/downloads/
5. Download payload dumper and extract its zip:-
https://androidfilehost.com/?fid=818070582850510260
6. The Pixel Experience ROM should be on ur PC.
7. Now extract the Pixel Experience ROM.
8. Put the "payload.bin" file from the extracted ROM file to payload dumper/payload_input
9. Run payload dumper.exe
10. Wait for all files to be extracted.
11. Now install adb and fastboot drivers (Skip to step 13, if you already have it):-
https://developer.android.com/studio/releases/platform-tools
12. Extract the adb and fastboot drivers zip and add that folder to path (if you don't know how to add a path, google it).
13. Enable USB debugging via developer options on your phone and after that connect your phone via USB to PC.
14. Now go to payload dumper/ payload_output folder and open a command window there.
15. On the command window, type the following commands one by one:
Code:
adb reboot bootloader
fastboot -w
fastboot flash recovery recovery.img
fastboot reboot fastboot
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot flash odm odm.img
fastboot flash vendor vendor.img
fastboot reboot
16. Done! Enjoy Pixel experience ROM
For updating subsequent builds of Pixel Experience ROM, download the latest build, follow steps 7-10, 14-15. But in step 15, skip the "fastboot -w" command.
Alternate Platform Generic payload dumper: https://github.com/theincognito-inc/payload_extractor.git
theincognito said:
@GDZechariah @Moffei97 @firdoshakir @matteosaeed @manhong2112
The zip is flashable, but without the twrp, you can't flash that way.
Instructions to flash (noob friendly):
YOUR BOOTLOADER SHOULD BE UNLOCKED
1. Flash OOS 11 on both slots (Use local upgrade option/flash via fastbootd).
2. Check using this app if u have OOS on slot_b:-
https://play.google.com/store/apps/details?id=flar2.devcheck
1-2. (ALTERNATE WAY) - Flash OOS to slot_b via fastbootd and set the active partition as slot_b.
3. Download the latest Pixel experience ROM.
4. Download and install Python3 on your PC (TICK THE ADD PYTHON TO PATH OPTION):-
https://www.python.org/downloads/
5. Download payload dumper and extract its zip:-
https://androidfilehost.com/?fid=818070582850510260
6. The Pixel Experience ROM should be on ur PC.
7. Now extract the Pixel Experience ROM.
8. Put the "payload.bin" file from the extracted ROM file to payload dumper/payload_input
9. Run payload dumper.exe
10. Wait for all files to be extracted.
11. Now install adb and fastboot drivers (Skip to step 13, if you already have it):-
https://developer.android.com/studio/releases/platform-tools
12. Extract the adb and fastboot drivers zip and add that folder to path (if you don't know how to add a path, google it).
13. Enable USB debugging via developer options on your phone and after that connect your phone via USB to PC.
14. Now go to payload dumper/ payload_output folder and open a command window there.
15. On the command window, type the following commands one by one:
Code:
adb reboot bootloader
fastboot -w
fastboot flash recovery recovery.img
fastboot reboot fastboot
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot reboot
16. Done! Enjoy Pixel experience ROM
For updating subsequent builds of Pixel Experience ROM, download the latest build, follow steps 7-10, 14-15. But in step 15, skip the "fastboot -w" command.
Alternate Platform Generic payload dumper: https://github.com/theincognito-inc/payload_extractor.git
Click to expand...
Click to collapse
Hi, thanks for your step by step guide. It worked. Also I notice that I am flashing it in the wrong order before.
I can't turn on wifi after flashed. Also It seems that the screen refresh rate is only 60hz. Other than that fingerprint is working, also gcam.
manhong2112 said:
I can't turn on wifi after flashed. Also It seems that the screen refresh rate is only 60hz. Other than that fingerprint is working, also gcam.
Click to expand...
Click to collapse
You can change the refresh rate via display settings. No wifi bug for me though
theincognito said:
You can change the refresh rate via display settings. No wifi bug for me though
Click to expand...
Click to collapse
Can confirm on 120hz and wifi
matteosaeed said:
Can confirm on 120hz and wifi
Click to expand...
Click to collapse
A bit confused by your wording. Both are not working? Or both are working?
Not a native English speaker
Waiting for TWRP
I submitted on ( in deep tool ) still application approved
Can I open bootloader now ?
I need rom for my device and all file to root it
V ( RMX3241_11_A.15 )
do you still want to root smartphone?
Please don't root , useless as no custom ROM is available or you might brick your device
I have rooted my smartphone, on realme 8 5G
Rzk09 said:
I have rooted my smartphone, on realme 8 5G
Click to expand...
Click to collapse
Hello, can you tell me how you got root access, thanks
frenon76 said:
Hello, can you tell me how you got root access, thanks
Click to expand...
Click to collapse
has your device been unlocked bootloader?
Not yet, I'm working on it
frenon76 said:
Not yet, I'm working on it
Click to expand...
Click to collapse
what version of the firmware build is on your device?
RMX3241VF_11_A_23
frenon76 said:
RMX3241VF_11_A_23
Click to expand...
Click to collapse
Global or India?
Global
frenon76 said:
Global
Click to expand...
Click to collapse
if you have unlocked your device, follow these steps
1.donwload boot.img and vbmeta.img, if your firmware version is A.23 global version you can download it in Attachments
2. Patch the boot.img that you downloaded earlier in the magisk manager, when it's finished you can change the name to "boot.img" to make it easier to patch
3. Copy the boot.img patch to your laptop/PC in "adb and fastboot" folder, together with vbmeta.img (don't patch the vbmeta.img file in magisk manager)
4. turn on usb debugging option
5. enter fastboot mode (turn off your device and hold vol up and power)
6. if you have entered fastboot, plug your devices into your laptop/pc and type in adb "fastboot devices" (make sure your devices are connected)
7. And now start patching the boot.img file that you patched earlier and disable boot verification (vbmeta.img)
8. Ok,Patch the boot.img file with the command "fastboot flash boot boot.img"
9. and finally disable vbmeta copy this command "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img"
10. and restart your device
I hope this can help you
Muchas gracias, voy a intentar
Rzk09 said:
if you have unlocked your device, follow these steps
1.donwload boot.img and vbmeta.img, if your firmware version is A.23 global version you can download it in Attachments
2. Patch the boot.img that you downloaded earlier in the magisk manager, when it's finished you can change the name to "boot.img" to make it easier to patch
3. Copy the boot.img patch to your laptop/PC in "adb and fastboot" folder, together with vbmeta.img (don't patch the vbmeta.img file in magisk manager)
4. turn on usb debugging option
5. enter fastboot mode (turn off your device and hold vol up and power)
6. if you have entered fastboot, plug your devices into your laptop/pc and type in adb "fastboot devices" (make sure your devices are connected)
7. And now start patching the boot.img file that you patched earlier and disable boot verification (vbmeta.img)
8. Ok,Patch the boot.img file with the command "fastboot flash boot boot.img"
9. and finally disable vbmeta copy this command "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img"
10. and restart your device
I hope this can help you
Click to expand...
Click to collapse
HELP, I did this on my phone (realme 8 5g global) and now the system does not turn on as something is recovery (TWRP) and fastboot works normally
this is my main and the only relatively new phone so please help
PS sorry for mistakes, I'm from Poland and I'm writing through a translator
Rzk09 said:
if you have unlocked your device, follow these steps
1.donwload boot.img and vbmeta.img, if your firmware version is A.23 global version you can download it in Attachments
2. Patch the boot.img that you downloaded earlier in the magisk manager, when it's finished you can change the name to "boot.img" to make it easier to patch
3. Copy the boot.img patch to your laptop/PC in "adb and fastboot" folder, together with vbmeta.img (don't patch the vbmeta.img file in magisk manager)
4. turn on usb debugging option
5. enter fastboot mode (turn off your device and hold vol up and power)
6. if you have entered fastboot, plug your devices into your laptop/pc and type in adb "fastboot devices" (make sure your devices are connected)
7. And now start patching the boot.img file that you patched earlier and disable boot verification (vbmeta.img)
8. Ok,Patch the boot.img file with the command "fastboot flash boot boot.img"
9. and finally disable vbmeta copy this command "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img"
10. and restart your device
I hope this can help you
Click to expand...
Click to collapse
bro please i need your help i'am on A24 Global version version do u have boot.img of this version if not please give me link of A23 global version full rom thank u
mantap, how to downgrade into RMX3241VF_11_A_23? ada no wa or youtube or ig?.. thank u, terima kasih
Rzk09 said:
I have rooted my smartphone, on realme 8 5G
Click to expand...
Click to collapse
Vbmat.img and boot.img for RMX3241_11_A.16 please
Rzk09 said:
if you have unlocked your device, follow these steps
1.donwload boot.img and vbmeta.img, if your firmware version is A.23 global version you can download it in Attachments
2. Patch the boot.img that you downloaded earlier in the magisk manager, when it's finished you can change the name to "boot.img" to make it easier to patch
3. Copy the boot.img patch to your laptop/PC in "adb and fastboot" folder, together with vbmeta.img (don't patch the vbmeta.img file in magisk manager)
4. turn on usb debugging option
5. enter fastboot mode (turn off your device and hold vol up and power)
6. if you have entered fastboot, plug your devices into your laptop/pc and type in adb "fastboot devices" (make sure your devices are connected)
7. And now start patching the boot.img file that you patched earlier and disable boot verification (vbmeta.img)
8. Ok,Patch the boot.img file with the command "fastboot flash boot boot.img"
9. and finally disable vbmeta copy this command "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img"
10. and restart your device
I hope this can help you
Click to expand...
Click to collapse
Can you send me the attachments for RMX3241_11_C.04 this android version?
Rooted Realme 8 5G to fix unknown IMEI but in the end I know that unknown baseband is the major problem, and no custom ROM for RMX3241.
Stock firmware: RMX3241_11_A.26
Magisk 25.2
Root Tool: MTKClient (GitHub) with Brom/Edl Mode since I got no fastboot
For MTKClient, you'll need to install "MediaTek CDC driver 1.0.8" and manually add legacy hardware in device manager "MediaTek USB PORT" and other thing that you need in the github link.
Root method just same as fastboot method, patch your boot.img with Magisk app and flash patched boot.img + vbmeta.img or using MTKClient flash the patched boot.img and vbmeta.img.empty included in MTKClient.
Where to get your stock boot.img vbmeta.img? Use MTKClient or MTKMETAUTILITY to dump it from your phone. Dump the whole img except userdata to backup just incase....
If somehow the root fail after like 1h bootloop at logo, just reflash with stock boot vbmeta. So keep in mind to backup your stock img file.
I also have TWRP as recovery flashed using MTKClient but no custom ROM?
Found a way to update Magisk to v25.2!
1. Copy to the adb folder with adb+fastboot drivers (which is in the root of C:\ drive) vbmeta.img file from the firmware archive installed on your phone ;
2. In the "Settings" of the Magisk application should be selected "Update channel - Stable";
3. Update the application Magisk Manager to v25.2. After the update, it will restart;
4. Update Magisk itself by selecting the "Direct install" method. After updating is completed, the phone is reloaded into bootloader (fastboot mode);
5. Call the Command line in the adb folder and run the command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
6. Restart the phone. The system starts, Magisk updated to v25.2!
Cool
Thanks I just did the procedure and it works
4. After updating is completed, my phone was trapped in a loop of restart. I entered fastboot manually.
First things first. What you need:
Platform tools
MIUI 14 Beta Stable Stock ROM
Android OTA Extractor
Device updated to MIUI 14 Beta
Magisk app installed on the phone
Step 1
Extract MIUI 14 zip on your PC. Move payload.bin to Android OTA extractor folder.
Open terminal in the same folder.
Enter following command:
Android-ota-extractor.exe payload.bin
Let it extract.
Step 2
Root your phone via Magisk app.
Move the boot.img extracted from payload.bin to you phone's internal storage.
Open Magisk app.
Click install, select file and patch.
Once done, move your patched boot image to your PC and put it in platform-tools folder.
Reboot device into bootloader.
Open terminal in platform-tools folder.
Enter the following:
cmd
Press ENTER
fastboot flash boot patched_magisk_(press TAB to autocomplete).img
Let it finish. Reboot. Check if device is rooted.
Step 3
Download a GSI of your choice. I personally tested Pixel Experience Base/Plus and Evolution X by ponces. Extract and put the img file in platform-tools.
Reboot to fastboot.
Enter the following:
fastboot reboot fastboot
fastboot erase system
fastboot delete-logical-partition product_a
fastboot flash system yourgsiname.img
fastboot -w
If you want root just enter (you might actually need it, check footnotes)
fastboot reboot
If you don't, then flash the stock unpatched boot.img and reboot.
The process is done. Footnotes:
Set up the device offline. Go to phh treble settings. Select Misc.
Install ims package check both:
Request IMS
Force 4G Calling....
Reboot
Now continue setting up and logging in with your google account. SMS verification should work now.
The problems:
Incoming calls will go through on the callers side but won't pop up on your phone. Some say it might be fixed by using the Truecaller app as default phone app but I haven't tested.
Refresh rate is finicky. You need root for this. Do the following:
Download the Dfps magisk module. While you're at it download the Universal SafetyNet bypass module as well. Enable Zygisk in Magisk app and install both modules. Reboot. Should mostly be fixed now.
That's all folks.
rorkeanathema said:
First things first. What you need:
Platform tools
MIUI 14 Beta Stable Stock ROM
Android OTA Extractor
Device updated to MIUI 14 Beta
Magisk app installed on the phone
Step 1
Extract MIUI 14 zip on your PC. Move payload.bin to Android OTA extractor folder.
Open terminal in the same folder.
Enter following command:
Android-ota-extractor.exe payload.bin
Let it extract.
Step 2
Root your phone via Magisk app.
Move the boot.img extracted from payload.bin to you phone's internal storage.
Open Magisk app.
Click install, select file and patch.
Once done, move your patched boot image to your PC and put it in platform-tools folder.
Reboot device into bootloader.
Open terminal in platform-tools folder.
Enter the following:
cmd
Press ENTER
fastboot flash boot patched_magisk_(press TAB to autocomplete).img
Let it finish. Reboot. Check if device is rooted.
Step 3
Download a GSI of your choice. I personally tested Pixel Experience Base/Plus and Evolution X by ponces. Extract and put the img file in platform-tools.
Reboot to fastboot.
Enter the following:
fastboot reboot fastboot
fastboot erase system
fastboot delete-logical-partition product_a
fastboot flash system yourgsiname.img
fastboot -w
If you want root just enter (you might actually need it, check footnotes)
fastboot reboot
If you don't, then flash the stock unpatched boot.img and reboot.
The process is done. Footnotes:
Set up the device offline. Go to phh treble settings. Select Misc.
Install ims package check both:
Request IMS
Force 4G Calling....
Reboot
Now continue setting up and logging in with your google account. SMS verification should work now.
The problems:
Incoming calls will go through on the callers side but won't pop up on your phone. Some say it might be fixed by using the Truecaller app as default phone app but I haven't tested.
Refresh rate is finicky. You need root for this. Do the following:
Download the Dfps magisk module. While you're at it download the Universal SafetyNet bypass module as well. Enable Zygisk in Magisk app and install both modules. Reboot. Should mostly be fixed now.
That's all folks.
Click to expand...
Click to collapse
I tried to flash the pixel experience hsi on my redmi 11 prime 5g using above method
I have successfully rooted my phone but while giving the command.
fastboot flash system yourgsiname.img
It says no such file found..
I tried for almost 4 to 5 times please help us
To install gsi also it's very sad that we cannot flash any twrp on redmi 11 prime 5g....
coolagori said:
I have successfully rooted my phone but while giving the command.
fastboot flash system yourgsiname.img
It says no such file found..
Click to expand...
Click to collapse
yourgsiname.img is given as example, you should put instead your GSI image filename in the command
Thanks for reminding me sir
I have done the same I have entered the name of rom only but then also it got the problem
Please help light users to get custom roms
And I forgot to tell that I didn't had miui 14 beta but I tried on both miui 14 India and miui 14 china but I failed
coolagori said:
And I forgot to tell that I didn't had miui 14 beta but I tried on both miui 14 India and miui 14 china but I failed
Click to expand...
Click to collapse
I am working on RisingOS (formerly know as RiceDroid) for the phone. It might take a while though.
Thank you so much for your efforts sir..
please tell me if you need any help regarding
testing