Lineage_dream2lte & Android Auto - Android Auto General

I instale the Android 10 (lineage.. and Gapps) on my S8+ . All ok ,Thanks to the developer . The only problem is with Android Auto and the usb connection in Lineage software... maybe authorities usb choice is not to file tranfer...
In S8+ with original samsung os "android 9" the application android auto with same version as above function very well.
I think the problem is the way that lineage manage the usb connection with Android Auto!!!
When Android Auto strat in the infotainment the phone usb force (goes) to "without file transfer" and the connection stops
Please help

Related

[Q] Tab plugged on USB is not showing in Windows since Jelly Bean upgrade

I have installed Cyanogen 10 Jelly Bean (build 2012-10-30) on my P7310, and everything went fine. I love it. :laugh:
Now the tab is charging when connected to my PC (Windows 7 x64). The problem is my tab it is not recognized by the PC as a USB device any more, the tab does not even show up in the device manager at all (Windows does not make the "new device" sound when I plug the tab).
I have tried to reinstall Samsung USB driver (v 1.5.15.0), I have rebooted the PC and the tab (many times), tried on two different USB ports, tried with Samsung Kies (nothing detected), tried with debug mode enabled (with Samsung ADB driver installed). Nothing, except when in debug mode, the device is displayed but I can't access the files stored on the internal SD card.
I would like to restore my Titanium backups, but for that I need to copy the backup files to my tab
Does anyone have similar problems with Cyanogen 9 or 10 on a P7310? Any clue on how I can try to solve this without restoring my tab to a previous Android version? Thanks!
I just found the answer in another thread: http://forum.xda-developers.com/showthread.php?t=1951110
Go to Settings -> Storage -> (use menu "USB computer connection" at top right corner) -> check "Media device (MTP)"
As simple as that. :angel:
I can confirm this! easy solution for a long search

[UPDATE] Remix Mini updated to Remix OS 2.0.626

We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
IMPORTANT NOTE: For users who have NOT updated since version 2.0.307, all updates between 2.0.307 and 2.0.626 have been included. This is a critical update for the functions and usability of your Remix Mini. We strongly suggest you update to this version. This also means that this update may take a few minutes longer than regular updates.
__________________________________________________
Please continue to give us feedback here: http://support.jide.com/hc/en-us/requests/new
Thanks!
Do you have it as non ROM but as a firmware file to overwrite all partitions and have a fresh version of 2.0.626?
RemixOS_Jason said:
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
IMPORTANT NOTE: For users who have NOT updated since version 2.0.307, all updates between 2.0.307 and 2.0.626 have been included. This is a critical update for the functions and usability of your Remix Mini. We strongly suggest you update to this version. This also means that this update may take a few minutes longer than regular updates.
__________________________________________________
Please continue to give us feedback here: http://support.jide.com/hc/en-us/requests/new
Thanks!
Click to expand...
Click to collapse
How to exit TV Mode without restarting?
RemixOS_Jason said:
We're back with an OTA update for 1GB and 2GB Remix Minis. Also, please know that if you are experiencing any type of streaming video issues, we've identified the problem, worked on a fix and are currently testing it now. If it passes, it'll be on the next update.
___________________________________________________
Remix OS on Remix Mini (1GB & 2GB) update version: 2.0.626
Release date: November 4, 2016
Release notes:
Updated Remix OS TV mode’s UI to the latest version.
_______________________________________________
Click to expand...
Click to collapse
Can't find a way to close Tv Mode and back to normal desktop. How?
dinh_duy said:
Can't find a way to close Tv Mode and back to normal desktop. How?
Click to expand...
Click to collapse
press circle next to start button
kesmtk said:
press circle next to start button
Click to expand...
Click to collapse
Thanks. Gonna try it later.
Do you mean, you'd rather have a fresh copy of Remix OS on version 2.0.626 with none of your previous saved data and apps? Did you have your previous version rooted? I believe if you were just looking for a fresh start with the latest version of Remix OS, you can reboot your Mini, and then press F2 when prompted, and then do a factory reset. You may need to go through some updates, but I'm told you should restart in 2.0.626.
I hope this helps.
kesmtk said:
Do you have it as non ROM but as a firmware file to overwrite all partitions and have a fresh version of 2.0.626?
Click to expand...
Click to collapse
RM1C was rooted but unrooted cannot apply OTA
My device is RM1C. I Wanted to root on 2.0.512 version. but it autoupdated to some unstable version 2.0.622 with crashes after exiting fullscreen app. (I noticed there appeared an error messages on some missing file when connected via uart port. this is the message:
init: unknown magic init: unknown magic init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
) but 2.0.512 was most stable version for me no errors on the uart also.
I rooted 2.0.622 version and allowed an app that I bought "gamecontroller2touch pro" to grant superuser permissions. It works as mapping xbox360 controller buttons to touch games like a charm, where a jide keymap does not support xbox360 it only works for keyboard input.
Then I saw a version for RM1C 2.0.627 was dowloaded in autoupdater. I unrooted and made system partition as it was. but it detects that the system was accessed as R/W and OTA update aborts with error 7.
I just wonder if the new version will not have that error that makes crash the desktop after exiting from fullscreen(as I found workaround to reutn to desktop after crash is to click xbox360 "back " button ). I have the incremental OTA for RM1C version 2.0.627 on usb, but cant install it . need reflash system.img.
RemixOS_Jason said:
Do you mean, you'd rather have a fresh copy of Remix OS on version 2.0.626 with none of your previous saved data and apps? Did you have your previous version rooted? I believe if you were just looking for a fresh start with the latest version of Remix OS, you can reboot your Mini, and then press F2 when prompted, and then do a factory reset. You may need to go through some updates, but I'm told you should restart in 2.0.626.
I hope this helps.
Click to expand...
Click to collapse
Got it. I remember your issue. I'm trying to work out 2 solutions for you:
1. Downgrade as you asked for. I'm waiting for the Chinese ROM team to give me the package and tutorial to be translated.
2. Flashing the Global (English) ROM into your Mini.
Do you prefer either/or? I'll respond still in private message to you about this.
Thanks!
kesmtk said:
My device is RM1C. I Wanted to root on 2.0.512 version. but it autoupdated to some unstable version 2.0.622 with crashes after exiting fullscreen app. (I noticed there appeared an error messages on some missing file when connected via uart port. this is the message:
init: unknown magic init: unknown magic init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
init: boost open /sys/devices/soc.0/cpu_budget_cool.16/roomage fail, No such file or directory!
) but 2.0.512 was most stable version for me no errors on the uart also.
I rooted 2.0.622 version and allowed an app that I bought "gamecontroller2touch pro" to grant superuser permissions. It works as mapping xbox360 controller buttons to touch games like a charm, where a jide keymap does not support xbox360 it only works for keyboard input.
Then I saw a version for RM1C 2.0.627 was dowloaded in autoupdater. I unrooted and made system partition as it was. but it detects that the system was accessed as R/W and OTA update aborts with error 7.
I just wonder if the new version will not have that error that makes crash the desktop after exiting from fullscreen(as I found workaround to reutn to desktop after crash is to click xbox360 "back " button ). I have the incremental OTA for RM1C version 2.0.627 on usb, but cant install it . need reflash system.img.
Click to expand...
Click to collapse
option 2 ; ) flash RM1C 2GB ram with RM1G firmware
..........option 2, I have pm'ed a message for you Thank You for help. :good:
RemixOS_Jason said:
Got it. I remember your issue. I'm trying to work out 2 solutions for you:
1. Downgrade as you asked for. I'm waiting for the Chinese ROM team to give me the package and tutorial to be translated.
2. Flashing the Global (English) ROM into your Mini.
Do you prefer either/or? I'll respond still in private message to you about this.
Thanks!
Click to expand...
Click to collapse
How and how long will this go on?
As a long time fan of Android-x86 I didn't really notice the Jide hardware until "The Merge"...
Now I see the Mini being sold off for half price and I wonder: Will it be obsolete on arrival?
I don't think I'd need Nougat on the device. I'd even think I'd be able to live with Lollipop.
But I can't operate a computer in my home network, that is unsafe to operate.
So I need the assurance that it will receive security updates until the end of its life cycle (3-5 years after purchase).
And I need the ability to control any computer I operate.
So will there be security updates until 2020?
Will you provide them or will you enable the community to provide them?
And will I be able to administer the system, de-activating services which have un-fixed vulnerabilities, blocking IPs, etc?
Generally that requires operating with root permissions on Linux systems, including those with an Android GUI.
$40 for a multi-media capable Linux systems running an attractive GUI is a great offer.
$40 for a potential IoT bot in my home network, which I can only throw away once somebody manages to subvert it, is a very bad investment, especially if it causes external damage.
So what will it be?
And will your future systems be any different?
BTW: Apart from 8 big desktops (Windows, Linux & Remix), 2 silent Atoms (Remix, Windows + Linux), 6 Notebooks (Windows, Remix & Linux), I operate 5 Android tablets and 10 Android phones (Canogenmod based Android, rooted by design).
Some of the PC hardware is 10 years old (3.4GHz Quad-Core Penryns work just fine with Nvidia GTX 1070), some of the Androids are still great after almost 6 years (e.g. Asus Eee Pad Transformer).
All of them run up-to-date operating systems with the latest patches. Typically not thanks to the vendor who produced the hardware but to the open source community which maintains Linux and Cyanogenmod.
If you treat the software on your hardware differently than Android-x86, you'll burn the brand very, very quickly.
usb boot
i have the remix mini rm1g with 626 is there a way to boot ubuntu via usb if i can boot into ubuntu can i install it and reinstall remix os on ubuntus root directory using grub customizer i know i can do that with remix os for pc
joeylikesubuntu said:
i have the remix mini rm1g with 626 is there a way to boot ubuntu via usb if i can boot into ubuntu can i install it and reinstall remix os on ubuntus root directory using grub customizer i know i can do that with remix os for pc
Click to expand...
Click to collapse
I don know, havent tried load linux on remix, I have rasbpberry pi and orange pi where they load everything from sd card.....remix mini loads from nand flash.
Maybe if you go to remix about screen and keep clicking build number to activate developer options.
Then dev options appear near about button in the options screen. Then enable usb debugging. select usb0 for debugging (the upper usb port)
install adb driver http://adbdriver.com/ . plug male - male usb cable PC-usb>remix upper usb port. Enter adb and enter root console. Maybe from root console it is possible to setup remix to load from sd card(where you linux kernel will be) by edidting uboot .
kesmtk said:
I don know, havent tried load linux on remix, I have rasbpberry pi and orange pi where they load everything from sd card.....remix mini loads from nand flash.
Maybe if you go to remix about screen and keep clicking build number to activate developer options.
Then dev options appear near about button in the options screen. Then enable usb debugging. select usb0 for debugging (the upper usb port)
install adb driver http://adbdriver.com/ . plug male - male usb cable PC-usb>remix upper usb port. Enter adb and enter root console. Maybe from root console it is possible to setup remix to load from sd card(where you linux kernel will be) by edidting uboot .
Click to expand...
Click to collapse
I don't think so. This is not a developer device, and not a traditional PC. It is a closed Android device (like Android phones and tablets), so would require custom bootloader/boot/etc. to loader other software. The Mini is made to show of Jide's bread and butter, their Remix OS software. They likely won't support officially installing any other 3rd party OS, since again, they are selling software and the hardware is incidental. Compared to the Raspberry Pi, which is open hardware designed for developing, and made to run various Linux releases and has broad support.
Now that it's EOL for the mini and no new updates are coming for it could we PLEASE have root?
4llerbuntu said:
Now that it's EOL for the mini and no new updates are coming for it could we PLEASE have root?
Click to expand...
Click to collapse
rooting easy, you must have uart to usb adapter. if you unscrew two screws under the rubber cover you will see 3 pins with GND tx and rx. Your usb to uart dongle shold have gnd tx and rx pins. 3,2 volt reading on the tx and gnd with multimeter. solder uart gnd pin to remix mini gnd. then uart tx to remix mini rx, and uart rx pin to remix mini tx. Open hyperterminal in windows. dial with com port setting 112500 none 8. and you have terminall root. from there you can cd to usb drive to install root
kesmtk said:
rooting easy, you must have uart to usb adapter. if you unscrew two screws under the rubber cover you will see 3 pins with GND tx and rx. Your usb to uart dongle shold have gnd tx and rx pins. 3,2 volt reading on the tx and gnd with multimeter. solder uart gnd pin to remix mini gnd. then uart tx to remix mini rx, and uart rx pin to remix mini tx. Open hyperterminal in windows. dial with com port setting 112500 none 8. and you have terminall root. from there you can cd to usb drive to install root
Click to expand...
Click to collapse
Looool:crying:
This is "easy"??
Seriously?
I always knew about this method. So there must be a reason I haven't tried it.
Anyways, id prefer rooting similar to what we have on numerous other Android devices, smartphones and TV boxes.
They usually don't require opening the device and a UART cable ......
re
4llerbuntu said:
Looool:crying:
This is "easy"??
Seriously?
I always knew about this method. So there must be a reason I haven't tried it.
Anyways, id prefer rooting similar to what we have on numerous other Android devices, smartphones and TV boxes.
They usually don't require opening the device and a UART cable ......
Click to expand...
Click to collapse
Well I had an old usb nokia adpter I tierd it appart and discoverd it has an uart interface with 3.2 volt communications sigal logic which is what is needed for remix mini. I soldered communications and boom I am as root user for remix mini . I copied supersu.zip and a instalation file from zip file inthe same foler. ran instalation file via sh command and root installed.
Maybe its possible to access root terminal from usb debugging.. I didnt try that.
You can install adb driver from adb.com. then click remix mini settings about. keep clicking version to get developer. enable developer. click settings menu again. click developer. click usb debuugging on. click usb0. then connect upper usb remix mini to pc usb. open pc cmd line and enter adb console. maybe from there you could do the stuff as root . I could
How do you install this? I'm currently on 2.0.203 and it says it fails trying to check for a new version. My internet is working fine though.
jbradshw said:
How do you install this? I'm currently on 2.0.203 and it says it fails trying to check for a new version. My internet is working fine though.
Click to expand...
Click to collapse
You must donwload phoenixsuit
https://www.dropbox.com/s/x7mnzui95c4459z/PhoenixSuit_EN_V1.0.8.msi?dl=0
adbdriver from
adbdriver.com
remix image
https://osdn.net/projects/remixos/downloads/66607/factory_image_rm1g_B2016110301-secure.img/
Warnining you will lose your all remix mini data.! games apps etc.
go to remix mini settings > abount. keep clicking on version number . the developer options will enable.
again go to settings>developer options > enable usb debuging , select usb0.
UNplug remix mini power cable.
Get a cliper and make a tool to push a "reset" button that is located in the hole in the back of remix mini. Try to for yourself by sticking cliper in the hole and feel the putton presses.
use usb MALE-MALE cable. connect remix mini upper usb port to laptop/PC usb.
I use windows 7 64bit
in laptop/PC:
1. Install the ADB tool
2. INstall PhoenixSuit. You will be guided through their installation instructions.
!let it autoupdate and restart it after updated
3. After the installation finishes, you can run PhoenixSuit by double-clicking the PhoenixSuit icon on the desktop.
4. Click ‘Firmware’ to enter the firmware flashing interface.
5. Click ‘Image’ to select the Remix OS img file.
!! click download one or multi partition to flash:
https://p5.zdusercontent.com/attach...Df0FXhMJxbcJLYkUku2_vQ.bLJYy1dgTWPhpfUCaIS3WA
6. Connect your Remix Mini to the PC via a USB-USB cable. NOTE: The cable must be plugged into the top USB port of remix mini.
7. Insert a straightened paperclip into the hole ar the back of your Remix Mini to press reset button.
8. while keeping clip inserted (reset button pushed) insert power cable to remix mini. Flashing image will start automatically, you can release the clicp holding reset button.
9. wait to complete, reboot mini.
Wow... what happened to the auto-update feature?

Tablet connect to Android auto head unit.

Hi , how are you guys , I hope everything is fine!
Is it possible for a tablet connect to Sync 3 as client device?
I just bought a china non branded tablet "Voyo i8 max" and I'm try to connect it to my Sync3.... and fail with nothing happened when I connect it.
For this Sync 3 HU , I'm pretty sure it is work well with Android auto , because I had ever connect it successfully to my HTC U Ultra.
The information of this tablet:
1. Android 7.1.1 ( I think it is AOSP)
2. CPU : Mediatek Helio X20
3. 4G ram
4. 64G flash
5. 4G LTE supported and able to dial phone to talk
That is what I tried for this tablet:
1. install Google play , service ....etc.(almost all I know apps from google frame)
2. install AA V3.4.582534 , V2.9xxx , V2.6(?)xxx
3. several USB cable were tried.
4. set tablet usb mode to data-transfer , charge , MTP ......etc.
5. root it and change build.prop from table to phone.
6. set tablet enable developer option and set usb as debug mode.
One thing very special is I follow this:
developer.android.com/training/auto/testing/
To use my PC as simulation HU , it successfully connected!!
so... I'm wondering if it is something need to "init" tablet AA when I plug this tablet to Sync 3?
this tablet is already rooted , so I can change root setting or change Linux kernel files....
it is very appropriate ,if you guys got any idea for this , please hint me .... I'll try it....
thank you very much and sorry about my English....

How can I connect my Android phone to Android Studio?

Android Studio version 3.2
I've got my Android phone connected to my Windows 10 computer via USB.
I can see my phone in Windows Explorer and browse it's files.
On my phone, I have gone into developer settings and set USB Debug enabled.
Proof: when it's connected, in my pull down list on my phone is an item that says "USB debugging connected".
In Android Studio when I click Tools -> SDK Manager -> SDK Tools - I see that Google USB Driver, version 11 is installed.
In Android Studio when I use the Connection Assistant, my phone shows up in the list of USB devices.
Still it says "No Android devices detected."
Has anybody else experienced this?
How can I connect my Android phone to Android Studio?
Try to setup official utilites to browse phone files and contacts. If it exists on oficial site. It helped me with Huawei PSmart. With standart ADB drivers it not work for me.

Android auto not working after phone update

I use a Xiaomi Mi10 (MIUI 12.2.1.0 stable, no root) and here is my problem. Before the update (from android 10 to 11) android auto was working just perfectly. I have an allwinner unit and an android auto dongle( i use the autoplay app version: 2020.12.04.1711). After the update i connect the dongle to my headunit, it always recognizes it, i connect my phone, the app tells me to turn on bluetooth and wifi to complete the setup, and then nothing. I wiped data from google services (phone), from android auto (phone), from autoplay app(headunit) and nothing. Any ideas and/or help?
Do u have USB debugging enabled? I unchecked it and it works now.
Have the same problem. Phone display turns black, WIFI and bluetooth on USB debugging enable, but the car says "connection not possible".
Tried to connect via bluetooth and USB.
Did you try restarting your phone? I had problems at one time and tried a bunch of stuff and totally forgot to just restart my phone. Which fixed it.
DaHype007 said:
I found the solution by myself, but only On Sakura Rom working. But Rom is Great so its OK for me. First i delete the APP. Than I deleted Android Auto Folder from system >system/priv-app and replace it with AndroidAutoStubPrebuilt Folder where the apk inside. Than after Reboot i update the Android Auto App in Google Play.
So now its working great
Click to expand...
Click to collapse
What do you mean prebuilt?

Categories

Resources