[ROM][11][UNOFFICAL][tucana] LineageOS 18.1 - Xiaomi Mi Note 10 ROMs, Kernels, Recoveries, & Oth

[ROM][11][UNOFFICAL][tucana] LineageOS 18.1 - Xiaomi Mi Note 10 ROMs, Kernels, Recoveries, & Oth

Variants:
Vanilla: pure LineageOS
Gapps: Via, GCamGo, Gapps
The installation instructions:
On some devices a full miui V12.1.5.0 flash was required (fastboot version)
Download my TWRP
Flash my TWRP or your ROM does not work
Wipe Dalvik/Art Cache, Cache, System, Product and Vendor
(Yes you have to wipe product. The old partition name was cust, but we use it now as product)
Format data
Reboot to recovery
Download lineage and copy it to your device
Flash lineage
(Download NikGapps core (only stable not canary) - other versions have problems with the clock)
(If you want to flash a different version except core and basic you have to enable the force install to /system in the NikGapps.config. You have been warned !)
For Magisk users:
Please boot lineage fully up
Reboot to recovery
Flash Magisk
Update the ROM:
Download the newest Lineage version
Copy it to your phone
Flash lineage in the recovery
Wipe dalvik
Reboot
Update the ROM for Magisk users:
If your device does not boot after an update please do the following:
Open the Lineage zip
Copy the boot.img from the zip to your phone
Flash the boot.img in the recovery
Flash Magisk
Reboot
When your FOD feels a bit funky please try the following:
Remove all your fingerprints and relearn them without moving your finger to much
If it is still not better please try to recalibrate the FOD

Downloads:
Firmware
Stock ROM
TWRP (This TWRP supports to take a backup of persist. I am not responsible if you loose RIL, WIFI, etc... if you break persist)
Lineage
NikGapps
Sources (lineage):
Device tree
Common tree
Kernel
Sources (TWRP):
Prebuilt kernel

Big special thanks to:
@Chemuski1
Special thanks to:
@ishockwave
@Hlcpereira
@PIPIPIG233666
The LineageOS Team
To all Donators and Contributors
Special thanks to the testers:
Adam M
Gustavo Henrique
ƏR|K
Gus
Sanya Pilot R3B0RN
fjmateus
Tahu Bulat™
Piotr Burdziński
Raphael Buthmann
𝓑𝓮𝓻𝓷𝓭
plutico pluticoman

reserved

Is lock screen brightness is very bright when unlocking phone using fingerprint ?

veimus said:
Is lock screen brightness is very bright when unlocking phone using fingerprint ?
Click to expand...
Click to collapse
No i fixed that

Fingerprints working. But same problem like another custom rom - gcam is unstable and on low resolutions against original tucana camera and its big minus...

Axident1973 said:
Fingerprints working. But same problem like another custom rom - gcam is unstable and on low resolutions against original tucana camera and its big minus...
Click to expand...
Click to collapse
Gcam is working without problems for me. Which one did you use? I'm using GCam_7.3.018_Urnyx05-v.2.4 and I can switch between all lenses

alibei said:
Gcam is working without problems for me. Which one did you use? I'm using GCam_7.3.018_Urnyx05-v.2.4 and I can switch between all lenses
Click to expand...
Click to collapse
Sorry, my mistake, appologies to you. Camera doing shots in big size. But not pure stable (sometimes freeze or force closed when switch mods), but other things is fully right in ROM, good job. (I have strange problem, after flash and boot, connect with PC good and transfer working, but after some minutes, if i remove all from backup, connect with PC don´t work, but it is which some my apk or settings, I don´t know...)

upgraded from rr to this rom. works good. testting Gcam from burial v8. for me works nice.

What manifest file should I use to build this from source?

Will this ever become a supported device?

OnTake said:
What manifest file should I use to build this from source?
Click to expand...
Click to collapse
Just use the default lineage 18 manifest and then use my device and vendor tree

Thanks!

Can anyone recommend gapps with google setup wizard?
NikiGapps has issues with google setup at first boot.
Nevermind, that's sorted.

Nice work. Waiting for Pixel Experience android 11, lineage os is just too plain for me

Very smooth and fluid rom, kudos to the dev.
Only thing fingerprint, which isn't as accurate most of the time.
Thanks for the great work

alibei said:
Gcam is working without problems for me. Which one did you use? I'm using GCam_7.3.018_Urnyx05-v.2.4 and I can switch between all lenses
Click to expand...
Click to collapse
How is now your experience with Gcam? Is still fully working without freezing and closing after switch between lenses?
And how resolutions of pictures and size? Working with full potential of original lenses or pictures are smaller and not so good?
I try this ROM only few minutes and i have a problem with freezing and closing (Burial, i think) and quality looking not so good like with same GCam on miui ROM? But maybe I am wrong.
I want clear android very much for this device, thanks developers, but MiNote10 is photo mobile, so need fully working camera.
Thanks for your experience.

Gcam is working without problems for me. I'm using GCam_7.3.018_Urnyx05-v.2.4 and I can switch between all lenses

Related

[sGSI 9.0]Dirty Unicorns[UNOFFICIAL][06.12.2018][S9/S9+/N9]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dirty Unicorns Semi GSI for Samsung Devices
By CodeFox & OpenSauce9810
I'm no longer maintaining this thread, check the note 9 thread here for latest updates
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimized as much as possible for our Samsung Devices.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
Flash Endurance GSI Kernel in TWRP
Flash BRJ6 Vendor
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
03.12.2018
Initial Release
05.12.2018
Updated sources to 9.0 r21 release. (December Security Patch)
Gapps included, (dialer and messenger also included so you won't start without a phone or sms app)
Bootanimation changed to reduce boot times
Tweaks to ambient play ticker so it clears when you clear media notifications
Further performance tweaks thanks to @malinathani animations transition smoother now.
06.12.2018
PHH Settings Removed.
Dual Speaker permanently integrated, will always persist and no longer needs to be activated.
Enhanced brightness ranges permanently integrated.
Sync latest DU Sources
Potential ratio fix for S9/S9+ Devices.
Screenshots
Video Review Thanks to @vmb265
Click here to view video review
Downloads:
BRJ6 Vendor
System Image GDrive
Endurance Kernel Thread (Use the GSI One)
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated! Donations are always welcome too, I've got electricity bills to pay!
Credits and Thanks
Dirty Unicorns (The best ROM ever)
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
phhusson - thank you for your work on project treble.
XDA:DevDB Information
[sGSI 9.0]Dirty Unicorns[UNOFFICIAL][06.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CodeFox, Rainbow_Dash, malinathani, Ivanmeler, phhusson, Dirty Unicorns
Source Code: https://github.com/DirtyUnicorns/android_manifest
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRJ6 Vendor
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-12-03
Created 2018-12-03
Last Updated 2018-12-29

System image link goes to wrong file?

NisseGurra said:
System image link goes to wrong file?
Click to expand...
Click to collapse
here https://drive.google.com/file/d/1REhuxpQ16VlDepJJKLH1FYMxZ7bwy0S7/view
ot will be updated when hes back

Installs, boots, sim pin ok, but sim menu in settings fc, no network. Kernel, vendor from 1st post

Download link updated. Sorry.

Is nightmode present? couldnt find it on the beta

I've installed it, boots, but no apps in the launcher, just Files, Settings, SIM Toolkit. WTF?

Ronam said:
I've installed it, boots, but no apps in the launcher, just Files, Settings, SIM Toolkit. WTF?
Click to expand...
Click to collapse
You need to install GAPPS 9.0 after rebooting into recovery following install of system image. This should be mentioned in the instructions.
Then you will get the usual install section after boot up and the usual google apps etc. I used GAPPS 9.0 nano.
All working well on my S9+.

Mihalaki said:
You need to install GAPPS 9.0 after rebooting into recovery following install of system image. This should be mentioned in the instructions.
Then you will get the usual install section after boot up and the usual google apps etc. I used GAPPS 9.0 nano.
All working well on my S9+.
Click to expand...
Click to collapse
Thanks, now everything works fine .

Mihalaki said:
You need to install GAPPS 9.0 after rebooting into recovery following install of system image. This should be mentioned in the instructions.
Then you will get the usual install section after boot up and the usual google apps etc. I used GAPPS 9.0 nano.
All working well on my S9+.
Click to expand...
Click to collapse
My bad. It's copy pasta from my PE thread. I'll update it tomorrow. It's a bit of a nightmare I've got so many threads to maintain haha.

Is there any way to use edge screen notifications?

Best rom atm! Perfect to set it up just the way you want it without bloat apps.
Just had to change Product.model to pixel xl in build props to get higher quality on Facebook vids.
Anyways, New daily for me. Thank you. ?

I can't flash the system image . Why is it ending in .xz ?

Its a compressed file, I just used 7zip to extract it.

mackeftw1 said:
Best rom atm! Perfect to set it up just the way you want it without bloat apps.
Just had to change Product.model to pixel xl in build props to get higher quality on Facebook vids.
Anyways, New daily for me. Thank you. ?
Click to expand...
Click to collapse
Is Bluetooth working for you?

which camera you're using on this ROM?

Didn't work for me, had two issues:
-Internal Data not being seen
- No network connection
- Says not to flash gapps, but it is needed as nothing is installed.
For me now, this isn't a usable ROM.

Danish2980 said:
Is Bluetooth working for you?
Click to expand...
Click to collapse
Yes. Using endurance gsi kernel

mackeftw1 said:
Yes. Using endurance gsi kernel
Click to expand...
Click to collapse
nvm
I thought its PE thread
On PE BT wont work with GSI kernel

Fingerprint in 3rd-party-apps
Hello @All,
i installed this good rom on my G965F and everything is working - BIG thx @devs...
I have only one question/issue: With my registered fingerprint i can unlock the screen - this works perfect, but in 3rd-party-apps i get an error with fingerprint and i cant use my fingerprint in these apps (e.g. banking app). Anyone know how to use my fingerprint in 3rd-party-apps? This is not working on all Pie-(s)GSI, not only on DU...
Greetz
Christian

[ROM][OTA][UNOFFICIAL][lavender][9] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android , which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by
installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are
not to blame us or XDA and its respected developers.
Installation
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Take Backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Wipe Cache
Reboot
Update through updater
Open the LineageOS updater
Search for updates
Download and click install
Now your device will reboot and flash automatically
Enjoy
Download
Download ROM:LineageOS 17
What's working :
Boots
RIL (Calls , SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR Camera
Camera
Cam recorder
Video Playback
Audio
Sensors
Flash
LED
GPS
VoLTE
Known bugs :
Offline charging
Some GCams not working
You tell me
News :
Join my telegram channel to see latest news!: lavenderci
Kernel source: At GitLab
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Redmi Note 7
Contributors
daniml3
Source Code: https://github.com/lineageos
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 10.3.6 or higher
Version Information
Status: Stable
Current Stable Version: 02/01/2020
Stable Release Date: 2020-02-01
Created 2020-01-02
Last Updated 2020-01-13

Reserved
There are some screenshots:
https://github.com/daniml3/rom_screenshots

Reserved

Great news! can you make "wifi-call" working? thanks.

agritux said:
Great news! can you make "wifi-call" working? thanks.
Click to expand...
Click to collapse
I didn't know that existed xD, btw will look to see what I can do. And, do you know any ROM for lavender that supports it? If so let me know.

daniml3 said:
I didn't know that existed xD, btw will look to see what I can do. And, do you know any ROM for lavender that supports it? If so let me know.
Click to expand...
Click to collapse
It is working on some pie ROMs. For example on havoc 2.9 it is working fine. And also it is working all miui ROMs. Maybe for Android 10 ROMs you need Android 10 firmware. But I think it will be released tomorrow by Xiaomi eu team. Thanks.

thanks a lot..been waiting for this for so long.
rom is very smooth,bitgapps works fine, magisk works, viper works
though its a first build, still a few notes-
- battery percentage and styles doesnt work
- network indicator in the middle cut by notch
- expanded desktop option is not accessible.
thanks

First of all thank you for your work.
I'm facing an error message on every reboot.
Also trebuchet stopped working message after changing the language and using full screen gestures.

Camera does not work (did not even try GCam as the rest of the ROM is so immature you have to roll back anyways)
GApps installation a nightmare
Whatsapp does not link with Google Account

Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?

eraycetin said:
First of all thank you for your work.
I'm facing an error message on every reboot.
Also trebuchet stopped working message after changing the language and using full screen gestures.
Click to expand...
Click to collapse
That's not happening to anyone, make sure it was a clean installation, and you met the firmware requeriments.

till. said:
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
Click to expand...
Click to collapse
The base of the trees are taken from PE yes

OTA update from 1/2 version to 1/3 version caused boot loop. The phone kept going to recovery. Clearing caches did not help.
I do have magisk installed. Maybe that's the issue? Clean install of 1/3 version worked fine.

till. said:
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
Click to expand...
Click to collapse
Official is not happening I guess.
No one wanted to maintain an official los before.

smvsmv said:
OTA update from 1/2 version to 1/3 version caused boot loop. The phone kept going to recovery. Clearing caches did not help.
I do have magisk installed. Maybe that's the issue? Clean install of 1/3 version worked fine.
Click to expand...
Click to collapse
That's because of the GApps.
You need to reinstall them after updating.

thanks
daniml3 said:
That's because of the GApps.
You need to reinstall them after updating.
Click to expand...
Click to collapse
Thanks! will try with the next update. That also means that I cannot try to install from the OTA update feature because the phone boots up right after flashing the ROM update.

smvsmv said:
Thanks! will try with the next update. That also means that I cannot try to install from the OTA update feature because the phone boots up right after flashing the ROM update.
Click to expand...
Click to collapse
LineageOS is working on a fix so addon.d will work and there wont be the needed to reinstall GApps. A workaround for using OTA is disabling auto-reboot after OTA in recovery, or just when the phone auto reboots, press volume up button to boot again into recovery.

Does this ROM need Gapps to work or can it work with microg? I tried installing LOS 16 without Gapps and I was never able to get it to boot without Gapps.

kari04 said:
Does this ROM need Gapps to work or can it work with microg? I tried installing LOS 16 without Gapps and I was never able to get it to boot without Gapps.
Click to expand...
Click to collapse
I'm using the ROM without gapps and all is ok

darhma said:
I'm using the ROM without gapps and all is ok
Click to expand...
Click to collapse
I'm going to give it a try, thank you

[ROM][UNOFFICIAL]LineageOS 17.1 for Poco X2/Redmi K30 [phoenix][20200405]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree: https://github.com/CryllicBuster273/android_device_xiaomi_phoenix
Common tree: https://github.com/CryllicBuster273/android_device_xiaomi_sm6150-common
Vendor tree: https://github.com/CryllicBuster273/android_vendor_xiaomi_phoenix
Kernel tree: https://github.com/stormbreaker-project/android_kernel_xiaomi_pheonix
Working:
Camera (and flashlight)
WiFi
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
Broken:
You tell me with bug reports
Compatibility:
Compatible with all Xiaomi Poco X2 variants.
Downloads:
lineage-17.1-20200618-UNOFFICIAL-phoenix.zip
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
First time Installation:
Boot to Recovery
Flash ROM Package
Format Data
Install [optional] Magisk if you want
Install [optional] GApps if you want
Updating from older ROM:
Boot to Recovery
Flash ROM Package
Install [optional] Magisk if you
Install [optional] GApps if you want
Important notes:
GApps can only be flashed on clean installs.
If you want to install Magisk make sure to flash it before Gapps
Important notes:
GApps can only be flashed on clean installs.
If you want to install Magisk make sure to flash it before Gapps
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Telegram Support Group: https://t.me/losphoenix
Credits & collaborations:
All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Donation :
If you like my work you can donate me in following places
UPI :- [email protected]
Paypal :- https://paypal.me/KakatkarAkshay
Contributors
CryllicBuster273
ROM OS Version: Android 10
ROM Kernel: Linux 4.14.117
ROM Firmware Required: Latest Stock MIUI
Version Information
Status: Stable
Created 2020-03-28
Last Updated 2020-03-28

Opened XDA just to be 1st to comment here lol

Happpyyyy to seee poco x2 custom rom development ??

Amazing work... Cheers!!

Wew noice work bro

Really nice to see it.
Waited for Lineageos for poco x2 & it's finally here.. thanks all keep it up:good:

Booted

Rom very well, thank you very much

Thanks @RandomRetard4676 for urs wonderful rom.

Vatumb said:
Booted
Click to expand...
Click to collapse
A video with all features & bugs would be appreciated buddy ?

Error not automatically turn off the screen when listening to the call

CanNguyen said:
Error not automatically turn off the screen when listening to the call
Click to expand...
Click to collapse
That's already mentioned in the bug in list please read bro

Jay_B said:
That's already mentioned in the bug in list please read bro
Click to expand...
Click to collapse
Just updated after I reported that bug bro

CanNguyen said:
Just updated after I reported that bug bro
Click to expand...
Click to collapse
Cool..
Sorry didn't know.

Works flawlessly, even install Substratum Lite with working theme. No bugs other than the ones mentioned in the OP as of now. Thank you for this awesome ROM.

@CryllicBuster273 Thanks for this custom ROM
One question: In stock ROM we have display refresh rate option of 60/120Hz (I see the same in your ROM as well), but wanted to know if the display supports setting of 90 Hz refresh rates too which can be unlocked and set in custom ROMs?
---------- Post added at 04:40 AM ---------- Previous post was at 04:38 AM ----------
ir4hul said:
Works flawlessly, even install Substratum Lite with working theme. No bugs other than the ones mentioned in the OP as of now. Thank you for this awesome ROM.
Click to expand...
Click to collapse
Theme is looking good.
Few questions:
1. Which theme is this which you have installed using substratum?
2. Magisk safety net checks is passing?
3. Viper4android working without issues?

Everything works nicely including those like Viper4Android & notification led which do not work in Eu rom. Thank you.

Hi I am new user of Xiaomi phone need a basic guide how can flash this rom,I was user of Samsung phone, Xiaomi is completely new.thanks in advance.

Follow the steps (First time installation) as outlined in the OP assuming you have got twrp installed.
If Opengapp does not appear (no Play Store) after the boot, repeat the same steps without the step to format data to reinstall again.
I use the latest Opengapp nano package downloaded from opengapps.org. It works too.

coolcorner said:
@CryllicBuster273 Thanks for this custom ROM
One question: In stock ROM we have display refresh rate option of 60/120Hz (I see the same in your ROM as well), but wanted to know if the display supports setting of 90 Hz refresh rates too which can be unlocked and set in custom ROMs?
---------- Post added at 04:40 AM ---------- Previous post was at 04:38 AM ----------
Theme is looking good.
Few questions:
1. Which theme is this which you have installed using substratum?
2. Magisk safety net checks is passing?
3. Viper4android working without issues?
Click to expand...
Click to collapse
1. https://play.google.com/store/apps/details?id=liv.substratum.theme
2. No
3. Yes

[ROM][DISCONTINUED] LineageOS 18.1 for Xiaomi Mi MIX 2S

Device tree source code: LineageOS/android_device_xiaomi_polaris
Kernel source code: LineageOS/android_kernel_xiaomi_sdm845
Working:
Camera (and flashlight)
WiFi
NFC
Bluetooth
Telephony (Calls and Data)
IMS (RCS, VoLTE and WiFi Calling)
Audio (Record and Playback)
Video Playback
Sensors
GPS
Encryption (FBE)
WiFi Display
Broken:
Nothing (?)
Compatibility:
Compatible with all Xiaomi Mi MIX 2S variants.Builds are based off the Xiaomi's Android 10 firmware with proprietary blobs from MIUI v11.0.4.0 global stable package.
Downloads:
Official download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (TWRP recovery for Mi MIX 2S)
Format /system, /data and /cache
Install LineageOS zip package
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
* Required * firmware version must be based on MIUI Q-based builds.
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Credits & collaborations:
All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Device wiki:
Official wiki link

Thank you very very much for this great rom, works very smooth and snappy!
My twrp installation got overwritten by LOS-Recovery. It is safe to install TWRP again after installation?
So far I noticed three little bugs:
- Google feed is still missing after installing google search. Maybe this commit is missing: https://review.lineageos.org/c/LineageOS/android_packages_apps_Trebuchet/+/289553
- I can't grant sms permission to google play services. Which unfortunately prevent the installation of google pay
- Automatic brightness seems to be buggy: Sometimes the brightness level changes automatically to the smallest possible value. It will automatically get increased again after a few seconds.

pwn1ca said:
Thank you very very much for this great rom, works very smooth and snappy!
My twrp installation got overwritten by LOS-Recovery. It is safe to install TWRP again after installation?
So far I noticed three little bugs:
- Google feed is still missing after installing google search. Maybe this commit is missing: https://review.lineageos.org/c/LineageOS/android_packages_apps_Trebuchet/+/289553
- I can't grant sms permission to google play services. Which unfortunately prevent the installation of google pay
- Automatic brightness seems to be buggy: Sometimes the brightness level changes automatically to the smallest possible value. It will automatically get increased again after a few seconds.
Click to expand...
Click to collapse
1. That Google feed commit hasn't been merged yet
2. Did you install gapps after the first boot? I've seen other people have that problem when they don't flash gapps with the rom. You can factory reset, or do a clean flash again to resolve the issue.
3. I haven't installed it yet so can't help with that one

cvamoose said:
1. That Google feed commit hasn't been merged yet
Yeah, as there are still merge conflicts.
2. Did you install gapps after the first boot? I've seen other people have that problem when they don't flash gapps with the rom. You can factory reset, or do a clean flash again to resolve the issue.
Unfortunately yes, I did a factory reset and flashed gapps before first boot, issues are resolved now.
3. I haven't installed it yet so can't help with that one
Click to expand...
Click to collapse
Seems to be working for now, I'll keep an eye on that.

Tried to download it to give it a go, Google Drive says the file can't be downloaded at this time, too many downloads.
Can you share the link again, please?
Thank you

aurocha said:
Tried to download it to give it a go, Google Drive says the file can't be downloaded at this time, too many downloads.
Can you share the link again, please?
Thank you
Click to expand...
Click to collapse
Sign in to your google account and it will let you download

cvamoose said:
Sign in to your google account and it will let you download
Click to expand...
Click to collapse
Yep, you're right, it did.
Super smooth rom, daily driver material, I'll jump in.
Regards,

cvamoose said:
Sign in to your google account and it will let you download
Click to expand...
Click to collapse
Why sign in before download though ?

Does GPay work ok? And is it PlayStore certified?

The installation deletes the twrp. If I put it back, it won't start. The brightness bounces.

Encryption works? Decrypt from twrp?

bedson87 said:
Encryption works? Decrypt from twrp?
Click to expand...
Click to collapse
It does

tyratron said:
Does GPay work ok? And is it PlayStore certified?
Click to expand...
Click to collapse
I couldn't test gpay in real life conditions yet, but at least I get no error message, so I think it should work. PlayProtect certification is working. :good:
zoral566 said:
The installation deletes the twrp. If I put it back, it won't start...
Click to expand...
Click to collapse
Many thanks for that information, prevented me from reflashing

I can't flash any zip file via the los-recovery. The internal storage seems to stay encrypted. Any idea how to decrypt? Or ist this behavior expected? Is there any other way to flash zip files?

Quick question to the audience. Is BT working properly?

bgcngm said:
Quick question to the audience. Is BT working properly?
Click to expand...
Click to collapse
I was using it and had no issues.

I was not able to connect with my car BT (yatour cd changer) and my headphones Sony wh-1000xm3. However I was able to pair my watch Polar Vantage V (1st gen).

tyratron said:
I was not able to connect with my car BT (yatour cd changer) and my headphones Sony wh-1000xm3. However I was able to pair my watch Polar Vantage V (1st gen).
Click to expand...
Click to collapse
What happened? Did you get a strange error after pairing?

I can check a2dp with my car headunit later. Do you have any advice regarding the encrypted storage? Is there any way to decrypt storage while in recovery?

pwn1ca said:
I can check a2dp with my car headunit later. Do you have any advice regarding the encrypted storage? Is there any way to decrypt storage while in recovery?
Click to expand...
Click to collapse
What recovery, TWRP or Lineage recovery? TWRP should work, but Lineage one doesn't support userdata decryption by design.

[ROM][UNOFFICIAL][11][TB-X704F/L] LineageOS 18.1 for Lenovo Tab4 10 Plus

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
HOW TO INSTALL LINEAGEOS
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal/external sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package.
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal/external sdcard.
- Flash LineageOS.
- Update the Google Apps addon package if it is installed on your current LineageOS version.
- Reboot
WHAT WORKS:
Wifi
Bluetooth
Audio
Camera
LED
USB
Encryption
Hall sensor
DT2W (disabled by default in settings)
Fingerprint
Selinux Enforcing
BROKEN:
GPS (working for some users, read page 5 and 6)
SIM card (help needed as I have the wifi-only-tablet)
Bluetooth aptx (reported by user, unconfirmed)
Wireless display (reported by user, unconfirmed)
DOWNLOADS
LineageOS 18.1: GitHub
TWRP: XDA Thread
DEVELOPER RESOURCES
GitHub
MANY THANKS TO THE CONTRIBUTORS
@Coffeinflash

Changelog moved to GitHub.
Spoiler: Old changelog
2021-08-07
August security patch
Minor UI changes
2021-06-27
SELinux Enforcing
Support fingerprint authentication in apps
Build kernel with clang compiler
Adjust kernel (add Wireguard VPN, drop zcache and legacy filesystems, etc.)
2021-06-15
Upstream changes (including June security patch)
Fingerprint sensor bring up
Rebase kernel on kuntao
2021-05-11
Camera is working now (many thanks to @Coffeinflash for fixing it)
May security patch
Applied a patch to fix the random shutdowns
2021-04-30
Initial release

Thank you @LumenReaper for this build!
I can confirm fingerprint is not working, but this is no bigger issue to me.
Flashed Magisk and changed fingerprint two times. But safetynet is still failing - no idea. My sim card is also not detected.
I use the tablet for youtube and yatse mostly. Youtube Vanced workes fine and my Bose headphones are also connected and working.

Looking forward to this ROM thank you.

Coffeinflash said:
Thank you @LumenReaper for this build!
I can confirm fingerprint is not working, but this is no bigger issue to me.
Flashed Magisk and changed fingerprint two times. But safetynet is still failing - no idea. My sim card is also not detected.
I use the tablet for youtube and yatse mostly. Youtube Vanced workes fine and my Bose headphones are also connected and working.
Click to expand...
Click to collapse
Thanks for installing. Glad to hear you're getting along with the current feature set. I should have mentioned that my tablet has WiFi only. Feel free to send me a log if you want, but I expect it will be difficult to fix it without the device itself.
Personally, I have not had any problems with failing safetynet. In which situation does it cause you problems?
Will continue with the fingerprint scanner as soon as I have time again.
PureMAD4 said:
Looking forward to this ROM thank you.
Click to expand...
Click to collapse
You' re welcome.

First I want to thank @LumenReaper for the efforts to keeping our tablets up to date.
Is this ROM stable enough to use it daily or can I better wait?

Personally, I have not had any problems with failing safetynet. In which situation does it cause you problems?
Click to expand...
Click to collapse
I do not see any issues with failing safetynet so far. It was working in 17.1 so I just wondered about the error after changing the fingerprint of the device by the help of magisk.
I will try to build the rom on my own with your sources - hopefully I can help with the non working SIM card.

Is this ROM stable enough to use it daily or can I better wait?
Click to expand...
Click to collapse
If you need a SIM card , fingerprint or camera then you need to wait. For normal multimedia usage I call it stable enough.

That won't matter for me, I'll flash the ROM and patiently wait until those work on the new ROM.

Coffeinflash said:
I will try to build the rom on my own with your sources - hopefully I can help with the non working SIM card.
Click to expand...
Click to collapse
Sounds great. Let me know if you run into any issues with building.

Do you think this wll also work for the TB-X705F, the successor model?

I've installed this ROM but one thing I noticed is that the internal storage and the contents in it aren't visible at all on MiXplorer Silver (The file manager I use)
It isn't visible at the default file manager too so I rolled back to Lineage OS 17.1
I would appreciate if this is fixed @LumenReaper

Googole said:
I've installed this ROM but one thing I noticed is that the internal storage and the contents in it aren't visible at all on MiXplorer Silver (The file manager I use)
It isn't visible at the default file manager too so I rolled back to Lineage OS 17.1
I would appreciate if this is fixed @LumenReaper
Click to expand...
Click to collapse
I cannot confirm this problem. The default files app shows me the internal storage and an SD card with content. If I would have had such a serious problem, I would not have published the rom yet.
Have you done a clean flash? Have you tried the format data option in TWRP?
flouli said:
Do you think this wll also work for the TB-X705F, the successor model?
Click to expand...
Click to collapse
I don't know, do you use the TWRP of this series?

No, I dirty flashed it.
I use TWRP for TB-X704F.
I'll also try a clean flash.

LumenReaper said:
I don't know, do you use the TWRP of this series?
Click to expand...
Click to collapse
There is a separate TWRP for the tb-x705f series - any chance that this will work with your ROM?

flouli said:
There is a separate TWRP for the tb-x705f series - any chance that this will work with your ROM?
Click to expand...
Click to collapse
I have not found a link to the code in that thread, but I expect the rom not to work when you need a different TWRP.

Great work Lumenreaper! (now I need to find the courage to install it on the only operational tablet that I own )
I did manage to build it myself using Docker & the docker lineeage-ci-cd image (see https://github.com/lineageos4microg/docker-lineage-cicd )

Hello,
LumenReaper!
Thanx for your work, sir!
Tell me, please - Lineage OS 18.1 made on Android 11.0?
There is no word about it in first topic of this thread.
If Yes, where can i find Google Apps package for it?
Asking , because at https://opengapps.org/ there is nothing for Android 11
Thank you

Installing now
will try BiTGApps
BiTGApps
Custom Google Apps Project
bitgapps.github.io

Installed with a little error after every booting
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Database Develop

welcome