I'm a newbie at this but managed to stumble through installing CM 14.1 on my LG G2.
Phone: LG G2 VS980
CyanogenMod version: 14.1-20161207-unofficial-phoenix-vs980
Kernel version 3.4.0-crdroid-g0f70b4b
TWRP v2.8.6.3 (I don't know how this version got installed, I started out with a 2.7 version and upgraded to a later version but this is the version I see after I got CM installed).
Latest version of ADB and Fastboot from the platform-tools download.
I'm trying to make the phone automatically turn on when plugged into a charger using the " fastboot oem off-mode-charge 0" command .
ADB commands work fine.
If I issue the command "adb reboot bootloader" when the device is booted in CM I get rebooted into a black screen with the following:
"Firmware Update Do not unplug the USB connection until the process is complete." There is a progress bar that remains at 0%.
Any fastboot command I issue returns "waiting for any device". I have to hold down the phone power button for several seconds to exit this screen and then the phone reboots normally.
If I issue the "adb reboot bootloader" command when the phone is in TWRP or I select Reboot - Bootloader from TWRP the phone just reboots into CM.
What am I doing wrong?
Thanks
I'm not too familiar with this phone, but all that I know is that it is in download mode, which is not the same as a bootloader. As a lot of android phones aren't the same as each other, I am not aware of how to boot into a bootloader of this phone.
I will say though, if it is anything like a Samsung phone, then it probably does not have a bootloader and the only way to interface with this mode is through the LG Flash tool found here: https://lgflash.com/LGUP/
Don't take my word for it, but it is possible that this is the case. Again, I don't have any idea how the phone works or anything, but this is possibly the solution.
NTGDeveloper said:
I'm not too familiar with this phone, but all that I know is that it is in download mode, which is not the same as a bootloader. As a lot of android phones aren't the same as each other, I am not aware of how to boot into a bootloader of this phone.
I will say though, if it is anything like a Samsung phone, then it probably does not have a bootloader and the only way to interface with this mode is through the LG Flash tool found here: https://lgflash.com/LGUP/
Don't take my word for it, but it is possible that this is the case. Again, I don't have any idea how the phone works or anything, but this is possibly the solution.
Click to expand...
Click to collapse
I believe I'm in download mode when I'm seeing the black Firmware Update screen. I'm not trying to flash a ROM at this point so I don't think the LGUP program will be helpful.
If there is a another way to get my phone to turn on when power is applied to the USB cord I'm open to it.
RKCRLR said:
If there is a another way to get my phone to turn on when power is applied to the USB cord I'm open to it.
Click to expand...
Click to collapse
Perhaps by modifying whatever starts when it's charging.
Charging animation for example...
The meaning and purpose of Download mode, Bootloader mode and Fastboot mode are same.
Any fastboot command I issue returns "waiting for any device".
Click to expand...
Click to collapse
1st thing of all things in order to run Fastboot commands is you have to run command
Code:
fastboot devices
what establishes the USB connection. As long as the connection isn't established Fastboot throws message "waiting for any device".
BTW:
Booting into device's bootloader ( FYI: each device has a bootloader ) requires in addition to the well-known Fastboot driver the Android USB Driver got installed, too. This driver is OEM ( brand/model ) specific, you have it to obtain from OEM - mostly offered on their website.
jwoegerbauer said:
The meaning and purpose of Download mode, Bootloader mode and Fastboot mode are same.
Click to expand...
Click to collapse
Not the same really - and LGs aren't Samsungs, or whatever either...
One maybe could try emptying LAF partition ("nuking"). Some more drastic ways also suggest it for boot as well. But IDK, is it worth the trouble really? And even if one could get into the fastboot, that command might not work after all...
jwoegerbauer said:
The meaning and purpose of Download mode, Bootloader mode and Fastboot mode are same.
Click to expand...
Click to collapse
The way I get into download mode is to hold the volume up button and plug in the USB cable with the phone off. When I do this I briefly see a screen that says Download with a blue hashmarked bar below it. It then goes to a screen that says "Firmware Update Do not unplug the USB connection until the process is complete." with zero percent progress.
Should I be able to issue fastboot commands when the phone is at that screen?
RKCRLR said:
Should I be able to issue fastboot commands when the phone is at that screen?
Click to expand...
Click to collapse
Nope.
CXZa said:
Not the same really - and LGs aren't Samsungs, or whatever either...
One maybe could try emptying LAF partition ("nuking"). Some more drastic ways also suggest it for boot as well. But IDK, is it worth the trouble really? And even if one could get into the fastboot, that command might not work after all...
Click to expand...
Click to collapse
I'm trying to repurpose the phone as a dedicated Android Auto "server" and would like to be able to leave it connected to my car. It would be really useful to have the phone turn off when there is no USB poser and turn on when there is USB power.
If I make a backup of the Boot and System partitions within TWRP would that allow me to restore my LAF if I nuke the LAF and something goes awry?
RKCRLR said:
to have the phone turn off
If I make a backup of the Boot and System partitions within TWRP would that allow me to restore my LAF if I nuke the LAF and something goes awry?
Click to expand...
Click to collapse
>to have the phone turn off
Could it be there some app for such? IDK, maybe...
>If I make a backup
Nope again, The LAF has a partition of it's own. To backup use lglaf.py or LGUP having the dump option enabled or extract it from kdz if available.
CXZa said:
>to have the phone turn off
Could it be there some app for such? IDK, maybe...
>If I make a backup
Nope again, The LAF has a partition of it's own. To backup use lglaf.py or LGUP having the dump option enabled or extract it from kdz if available.
Click to expand...
Click to collapse
This is probably a bridge too far for my skill level.
Is there a work around like putting it into a deep sleep that will let the battery to last for days or weeks but wake up when the USB has power?
RKCRLR said:
This is probably a bridge too far for my skill level.
Is there a work around like putting it into a deep sleep that will let the battery to last for days or weeks but wake up when the USB has power?
Click to expand...
Click to collapse
There's probably a way to do this via root and there will probably be some app that lets you do this. Other than that, you'll have to dig around and see what you can find.
Thread cleaned and moved to Verizon LG G2 section
Related
Last night I was on my nexus before I would go to bed. I opened the franco kernel app and then noticed that r6 was available for download. I downloaded and flashed it and was about to go to sleep when I noticed the notification light that my phone was charging. I thought it was neat then tried to get some sleep, but my promised sleep did not come quick. After a good chunk of time had passed, I thought that my lack of sleep was caused by the green light that was barely noticable. I searched and searched in the app to try and find an option to disable the LED, but could not. I then decided that the best way to get rid of the light, would be to flash the older r5 kernel so I wouldn't have to see the light anymore. I hit flash and my phone rebooted and then brought me to the bootloader. I attempted to reboot but I could not. I've tried using adb and nexus root toolkit to get my device to work again, but they can't seem to find it without the correct drivers. I installed Motorola device manager, nothing. I tried to follow the instructions in the toolkit to get the correct drivers installed but I can't continue with the need to enable debugging, which I cannot do from being stuck at the bootloader.
Under bootloader logs, I have the following messages:
Invalid boot image size!
failed to validate boot image
Fastboot Reason: Fall-through from normal boot mode
Any help would be greatly appreciated.
USB debugging is an android setting. It can only be used when android is running. If you had USB debugging on, it would make absolutely no difference in recovery or bootloader so don't let that step stop you.
From the logs, it sounds like your kernel download is corrupt or didn't flash properly. I had a similar message when I flashed a partially downloaded recovery image today.
Just fastboot flash a complete boot image
I tried that last night by launching adb and doing 'adb devices' but my device is unrecognized and I am unsure of how to go about fixing that.
thecupman said:
I tried that last night by launching adb and doing 'adb devices' but my device is unrecognized and I am unsure of how to go about fixing that.
Click to expand...
Click to collapse
Tried what exactly? Adb and fastboot are two different things. Adb works in android or recovery only. Fastboot works in boot loader only. Boot to boot loader and do "fastboot devices"
Ah that was my mistake. But the fastboot devices command just returns a new line for a new command to be entered in
thecupman said:
Ah that was my mistake. But the fastboot devices command just returns a new line for a new command to be entered in
Click to expand...
Click to collapse
That probably means there is a blank line between them - showing that no device is found. Unlike Adb it just gives a blank line instead of "no devices".
Probably means a driver issue or cable issue. Try different USB ports / cables if you can. Check to see if there are any yellow triangles in device manager too.
I'm new to this phone so I don't know where the drivers are if you need them. If I ever find them, I'll port my nexus 5 Adb and fastboot thread over here. Unfortunately i use Linux at home so I don't really have a driver issue.
Oh, so if I were to use Linux I wouldn't have to deal with missing drivers? I'm assuming that's the issue since no matter which port I use, 'Connect USB Data Cable' doesn't change
thecupman said:
Oh, so if I were to use Linux I wouldn't have to deal with missing drivers? I'm assuming that's the issue since no matter which port I use, 'Connect USB Data Cable' doesn't change
Click to expand...
Click to collapse
I can't say for sure. In Linux you may need to add UDEV rules. I didn't though. My bootloader is just recognised.
Please do check your device manager though.
I'm sorry i can't help more right now. I'm going to bed.
Okay, thank you! I'll reply if I encounter any other errors!
The Google driver works for all Nexus devices (except the GNex): http://developer.android.com/sdk/win-usb.html
Hi, so my phone's LCD and glass are broken and there is no display nor is touch working but the phone is on. I don't want to spend any money on it for replacing the LCD. It's on Android 7.0 stock, not rooted and everything stock and Wifi and USB debugging is NOT enabled although there is no lock code on the phone. I need to transfer my data to my pc (and no internal SD files are backed up in my Google account) but when I connect my phone to my PC, it doesn't show any files as i need touch to enable file transfer mode even though it recognized the nexus 6. Now i have 2 questions.
1. How to backup/transfer all my data? (preferably an alternative to the OTG mouse and HDMI solution since i can't find it easily in my country and can't order from amazon/ebay etc to my country).
2. How to reset the phone completely if i want to sell it to someone?
Any help would be highly appreciated on this matter...
yasirrfc said:
Hi, so my phone's LCD and glass are broken and there is no display nor is touch working but the phone is on. I don't want to spend any money on it for replacing the LCD. It's on Android 7.0 stock, not rooted and everything stock and Wifi and USB debugging is NOT enabled although there is no lock code on the phone. I need to transfer my data to my pc (and no internal SD files are backed up in my Google account) but when I connect my phone to my PC, it doesn't show any files as i need touch to enable file transfer mode even though it recognized the nexus 6. Now i have 2 questions.
1. How to backup/transfer all my data? (preferably an alternative to the OTG mouse and HDMI solution since i can't find it easily in my country and can't order from amazon/ebay etc to my country).
2. How to reset the phone completely if i want to sell it to someone?
Any help would be highly appreciated on this matter...
Click to expand...
Click to collapse
Adb pull files from recovery
holeindalip said:
Adb pull files from recovery
Click to expand...
Click to collapse
Hi, thanks for your reply. Can you please explain/guide me a bit on adb pull?
yasirrfc said:
Hi, thanks for your reply. Can you please explain/guide me a bit on adb pull?
Click to expand...
Click to collapse
What files are you needing to get off?
holeindalip said:
What files are you needing to get off?
Click to expand...
Click to collapse
I only need my images and the whatsapp folder. btw i dont have usb debugging enabled and not rooted.
yasirrfc said:
I only need my images and the whatsapp folder. btw i dont have usb debugging enabled and not rooted.
Click to expand...
Click to collapse
Do you have e a custom recovery installed? Bootloader unlocked? Can you see anything onscreen?
holeindalip said:
Do you have e a custom recovery installed? Bootloader unlocked? Can you see anything onscreen?
Click to expand...
Click to collapse
Nope no custom recovery installed. i didn't unlock the bootloader so im guessing its locked. and can't see anything on the screen nor can it recognize touch input as LCD and glass is damaged. is there any way?
yasirrfc said:
Nope no custom recovery installed. i didn't unlock the bootloader so im guessing its locked. and can't see anything on the screen nor can it recognize touch input as LCD and glass is damaged. is there any way?
Click to expand...
Click to collapse
I haven't used adb enough to know whether or not if stock recovery can be used, maybe somebody else can chime in
I hate to say it but your getting them by replacing the screen. Without root or adb debugging you won't even have access to the directory or be able to issue the device any commands.
zelendel said:
I hate to say it but your getting them by replacing the screen. Without root or adb debugging you won't even have access to the directory or be able to issue the device any commands.
Click to expand...
Click to collapse
Can i reset my phone in this condition? If i end up selling it, i want to wipe all the data in it so is that possible in this condition?
yasirrfc said:
Can i reset my phone in this condition? If i end up selling it, i want to wipe all the data in it so is that possible in this condition?
Click to expand...
Click to collapse
Maybe if you have it connected to the device the Android device manager. I disable it myself so can't say for sure. Other then that. No you are not gonna be able to. I really would just replace the screen. Not only will you learn something but you will be able to get all your stuff as well as the sale value will be higher.
bump
zelendel said:
Maybe if you have it connected to the device the Android device manager. I disable it myself so can't say for sure. Other then that. No you are not gonna be able to. I really would just replace the screen. Not only will you learn something but you will be able to get all your stuff as well as the sale value will be higher.
Click to expand...
Click to collapse
is wiping through fastboot an option? like if i enter download mode and wipe through a fastboot command.. don't know the exact steps though..
yasirrfc said:
is wiping through fastboot an option? like if i enter download mode and wipe through a fastboot command.. don't know the exact steps though..
Click to expand...
Click to collapse
If you are wanting to just wipe and sell then yes it is an option
holeindalip said:
If you are wanting to just wipe and sell then yes it is an option
Click to expand...
Click to collapse
ok so i've downloaded a fastboot compilation and i need to use fastbook device to check if nexus 6 is in fastboot mode and fastboot -w to wipe. I tried turning my phone off but i think it doesnt turn off until you press the power off button on the screen, even if you hold the power button longer. so ill let my phone fully discharge so it turns off and then charge it a bit while its off and then try to turn it on in fastboot mode by pressing volume down and power and then enter the commands. seems right?
yasirrfc said:
ok so i've downloaded a fastboot compilation and i need to use fastbook device to check if nexus 6 is in fastboot mode and fastboot -w to wipe. I tried turning my phone off but i think it doesnt turn off until you press the power off button on the screen, even if you hold the power button longer. so ill let my phone fully discharge so it turns off and then charge it a bit while its off and then try to turn it on in fastboot mode by pressing volume down and power and then enter the commands. seems right?
Click to expand...
Click to collapse
Yup, if you plug the phone into PC before booting into fastboot, hold vol- then hit power button,while in your fastboot directory on PC, hold shift and right click mouse button, then click open command prompt from here. Then type: fastboot devices this will then tell you on PC if phone is connected and ready to receive commands. If it returns your phones serial number then proceed with the commands
If you hold power button to reboot phone, as soon as phone vibrates hold the vol- key and it should put you into fastboot mode
holeindalip said:
Yup, if you plug the phone into PC before booting into fastboot, hold vol- then hit power button,while in your fastboot directory on PC, hold shift and right click mouse button, then click open command prompt from here. Then type: fastboot devices this will then tell you on PC if phone is connected and ready to receive commands. If it returns your phones serial number then proceed with the commands
If you hold power button to reboot phone, as soon as phone vibrates hold the vol- key and it should put you into fastboot mode
Click to expand...
Click to collapse
can't seem to boot in fastboot mode. My PC recognizes nexus 6 when its connected in normal mode so i know when its normally on. So i tried holding the power down button for 10 seconds or so and then tried holding the volume down button for several seconds and then connected it to PC but fastboot didn't recognize it neither my PC in general but after a while nexus 6 showed up on my PC which probably meant it rebooted normally without going into fastboot mode. any tips?
yasirrfc said:
can't seem to boot in fastboot mode. My PC recognizes nexus 6 when its connected in normal mode so i know when its normally on. So i tried holding the power down button for 10 seconds or so and then tried holding the volume down button for several seconds and then connected it to PC but fastboot didn't recognize it neither my PC in general but after a while nexus 6 showed up on my PC which probably meant it rebooted normally without going into fastboot mode. any tips?
Click to expand...
Click to collapse
Probably need to install drivers
holeindalip said:
Probably need to install drivers
Click to expand...
Click to collapse
tried installing the drivers twice. no luck...
holeindalip said:
Probably need to install drivers
Click to expand...
Click to collapse
it finally worked but after wiping it said erase successful, but not automatically formatting. cant determine partition type and then it said failed twice. dont know if it wiped it or not so ill leave my phone in fastboot mode for a while. any clues? should i flash a stock image on it or something?
Hey everyone
Not sure if anyone can help
I just got some used 5th gen tablets, they were in a storage unit i just purchased. I turned on one of the fire units and it says it was a kids fire, so no real use to me. I hit power to standby and left it in my office, went back to list it and it was updated with new software. The second one, seems like it is stuck in a boot loop, comes on and goes off again. So i looked at the one that updated, said it now updated, had 5.6 on it, so i said maybe i could use it. Did some research, read you can but just android on it.
Well, i read you have to downgrade to 5.3 or older to install android. Not even sure if this is right.
So i followed some youtube genius with software from rootjunky.
I used the adb to flash update-kindle-global-37.5.4.2_user_542168620.bin
Everything was working, installing 100%, then i unplugged and selected 1 from the tablet to reboot.
Needless to say, nothing comes on now, no logo, no nothing, will not respond to recovery mode, down and power.
I just tried taking the back off and unplugging the battery and holding power 20 secs, nothing.
Anyone have any ideas to salvage these, or one of them or are they paperweights haha?
Good news is, the unit had all kinds of stuff in it, i have made my money back already, these were just bonus
Any help would be great, thanks
vetteguy82 said:
Hey everyone
Not sure if anyone can help
I just got some used 5th gen tablets, they were in a storage unit i just purchased. I turned on one of the fire units and it says it was a kids fire, so no real use to me. I hit power to standby and left it in my office, went back to list it and it was updated with new software. The second one, seems like it is stuck in a boot loop, comes on and goes off again. So i looked at the one that updated, said it now updated, had 5.6 on it, so i said maybe i could use it. Did some research, read you can but just android on it.
Well, i read you have to downgrade to 5.3 or older to install android. Not even sure if this is right.
So i followed some youtube genius with software from rootjunky.
I used the adb to flash update-kindle-global-37.5.4.2_user_542168620.bin
Everything was working, installing 100%, then i unplugged and selected 1 from the tablet to reboot.
Needless to say, nothing comes on now, no logo, no nothing, will not respond to recovery mode, down and power.
I just tried taking the back off and unplugging the battery and holding power 20 secs, nothing.
Anyone have any ideas to salvage these, or one of them or are they paperweights haha?
Good news is, the unit had all kinds of stuff in it, i have made my money back already, these were just bonus
Any help would be great, thanks
Click to expand...
Click to collapse
Permanently bricked; can't downgrade below 5.4. Sell it for parts or take it to the target range.
Thanks
Thanks for the reply
Ok, so the one that will not turn on at all , well technically it must be on when i plug it into my pc, it does chime, and then a few seconds later it chimes again. Like it is turning itself on and off, but because you can not see anything on the screen, you can not tell.
What about the second one? It turns on and you see amazon, but then it turns itself off. It does let you go to fastboot and recovery in the corner of the screen using the buttons. However, all you see is that, recovery only says recovery, does not go into the recovery menu.
Any ideas if the second one is recoverable?
Thanks
vetteguy82 said:
Thanks for the reply
Ok, so the one that will not turn on at all , well technically it must be on when i plug it into my pc, it does chime, and then a few seconds later it chimes again. Like it is turning itself on and off, but because you can not see anything on the screen, you can not tell.
What about the second one? It turns on and you see amazon, but then it turns itself off. It does let you go to fastboot and recovery in the corner of the screen using the buttons. However, all you see is that, recovery only says recovery, does not go into the recovery menu.
Any ideas if the second one is recoverable?
Thanks
Click to expand...
Click to collapse
If you can not access the stock recovery menu there is no known method for recovering these devices with one exception: early build devices (bootloader version 5.00 & 5.01) can boot a twrp image from fastboot. If that works you'll be able to install a custom ROM (two choices) assuming nothing else is wrong with the hardware.
fastboot boot <twrp.img>
thanks
I must be doing something wrong again, i download the twrp.imga dn saved it in the fast boot adb folder. I put the kindle in fastboot mode, and plugged into pc, driver installed, from folder i went in to command prompt. in command prompt i added fastboot twrp.img and hit enter command prompt shows all the command prompts and definitions.
Is there something else i should do?
Thanks
Davey126 said:
If you can not access the stock recovery menu there is no known method for recovering these devices with one exception: early build devices (bootloader version 5.00 & 5.01) can boot a twrp image from fastboot. If that works you'll be able to install a custom ROM (two choices) assuming nothing else is wrong with the hardware.
fastboot boot <twrp.img>
Click to expand...
Click to collapse
vetteguy82 said:
I must be doing something wrong again, i download the twrp.imga dn saved it in the fast boot adb folder. I put the kindle in fastboot mode, and plugged into pc, driver installed, from folder i went in to command prompt. in command prompt i added fastboot twrp.img and hit enter command prompt shows all the command prompts and definitions.
Is there something else i should do?
Thanks
Click to expand...
Click to collapse
You need to install this tool on the host PC. Make note of the installation folder as you will need to execute the fastboot command from there. You'll also need to copy any necessary files (eg: twrp image) to that folder unless versed in referencing other folders from the command prompt.
Keep in mind it is highly unlikely your looping device will be able to boot twrp. Only the earliest models had this vulnerability which Amazon quickly plugged.
I have been blundering my way though the internet to get my ROG Phone 2 rooted. I have unlocked the bootloader, I have a modified boot image from magisk, I have the ADB connection set up through USB and it works fantastically. I honestly don't know how I got it work, it involved many different driver update attempts and then figuring out I hadn't put the phone into USB debugging, but now fastboot doesn't work.
ADB will list the device, but fastboot cannot see it. I have tried rebooting the phone into the bootloader, but there is no connection on either. Not sure why I thought that would work, but I tried. I really don't understand enough about fastboot to get any farther on my own.
I have the tencent version and I was pretty certain I have the CN android 9.0 on it, but I am no longer certain of that. I am running windows 10.
This is my build number: PKQ1.190414.001.WW_Phone-16.0622.1906.19-0
I honestly don't know, but does that WW mean my tencent phone is running the WW firmware?
RichDoe252 said:
I have been blundering my way though the internet to get my ROG Phone 2 rooted. I have unlocked the bootloader, I have a modified boot image from magisk, I have the ADB connection set up through USB and it works fantastically. I honestly don't know how I got it work, it involved many different driver update attempts and then figuring out I hadn't put the phone into USB debugging, but now fastboot doesn't work.
ADB will list the device, but fastboot cannot see it. I have tried rebooting the phone into the bootloader, but there is no connection on either. Not sure why I thought that would work, but I tried. I really don't understand enough about fastboot to get any farther on my own.
I have the tencent version and I was pretty certain I have the CN android 9.0 on it, but I am no longer certain of that. I am running windows 10.
This is my build number: PKQ1.190414.001.WW_Phone-16.0622.1906.19-0
I honestly don't know, but does that WW mean my tencent phone is running the WW firmware?
Click to expand...
Click to collapse
Fun fact, I just got Fastboot access from my computer by using the side USB port and rebooting into the bootloader from ADB. Still not to sure about the version bit. I think I'm just going to give it whirl and brick my device, maybe.
RichDoe252 said:
I have been blundering my way though the internet to get my ROG Phone 2 rooted. I have unlocked the bootloader, I have a modified boot image from magisk, I have the ADB connection set up through USB and it works fantastically. I honestly don't know how I got it work, it involved many different driver update attempts and then figuring out I hadn't put the phone into USB debugging, but now fastboot doesn't work.
ADB will list the device, but fastboot cannot see it. I have tried rebooting the phone into the bootloader, but there is no connection on either. Not sure why I thought that would work, but I tried. I really don't understand enough about fastboot to get any farther on my own.
I have the tencent version and I was pretty certain I have the CN android 9.0 on it, but I am no longer certain of that. I am running windows 10.
This is my build number: PKQ1.190414.001.WW_Phone-16.0622.1906.19-0
I honestly don't know, but does that WW mean my tencent phone is running the WW firmware?
Click to expand...
Click to collapse
1. You are running a WW rom, but that doesn't necessarily mean your fingerprint is matched. To update you need to have both WW rom and WW fingerprint. You can check if your fingerprint is CN or WW using device info hw from playstore under 'system'
2. In order to root you need to have a matching root boot img for your current rom ie root img for 1906.19, just checking that your know this?
3. Have you managed to get the phone recognised using the cmd 'fastboot devices'? Also are you using the side port?
4.when you say bootloader, have you definitely got the phone in fastboot mode - hold vol up and power button until you see the screen with some options. That screen is fastboot mode, you don't need to select any further options. Once in that mode, connect to pc, open adb and run the fastboot devices cmd. Once your device is recognised, report back here for further steps
superbrick.
reg66 said:
1. You are running a WW rom, but that doesn't necessarily mean your fingerprint is matched. To update you need to have both WW rom and WW fingerprint. You can check if your fingerprint is CN or WW using device info hw from playstore under 'system'
2. In order to root you need to have a matching root boot img for your current rom ie root img for 1906.19, just checking that your know this?
3. Have you managed to get the phone recognised using the cmd 'fastboot devices'? Also are you using the side port?
4.when you say bootloader, have you definitely got the phone in fastboot mode - hold vol up and power button until you see the screen with some options. That screen is fastboot mode, you don't need to select any further options. Once in that mode, connect to pc, open adb and run the fastboot devices cmd. Once your device is recognised, report back here for further steps
Click to expand...
Click to collapse
Thanks for the reply! I did indeed get fastboot to work over USB. Fastboot devices reported back the serial number and everything. I did not know that the build need to match on both the boot and the rom, but that does make sense and I probably should have realized that before I went ahead and copied the rooted boot.img I had over. Then my phone couldn't boot up proper, and got stuck in fastboot. Then I went ahead and copied all of the contents of the same rom over and now it is literally just a black screen. Won't turn on any more. I think I super bricked it.
Sorry I didn't see your post earlier and I know I am not father into the deep end, but is there a way out from where I am.
RichDoe252 said:
Thanks for the reply! I did indeed get fastboot to work over USB. Fastboot devices reported back the serial number and everything. I did not know that the build need to match on both the boot and the rom, but that does make sense and I probably should have realized that before I went ahead and copied the rooted boot.img I had over. Then my phone couldn't boot up proper, and got stuck in fastboot. Then I went ahead and copied all of the contents of the same rom over and now it is literally just a black screen. Won't turn on any more. I think I super bricked it.
Sorry I didn't see your post earlier and I know I am not father into the deep end, but is there a way out from where I am.
Click to expand...
Click to collapse
Oh jeepers dude. So just a black screen... Can you at least boot into fastboot?
reg66 said:
Oh jeepers dude. So just a black screen... Can you at least boot into fastboot?
Click to expand...
Click to collapse
Nope. The only response I can get out of it now is when I plug it into the fastboot port, the computer recognizes that something was plugged in. I don't even get a device on a device manager.
RichDoe252 said:
Nope. The only response I can get out of it now is when I plug it into the fastboot port, the computer recognizes that something was plugged in. I don't even get a device on a device manager.
Click to expand...
Click to collapse
Try holding the power button for around 20 secs until it shuts down. Then try vol up and power together and see if you get back to fastboot. If that doesn't work try vol up vol down and power buttons all together. Then try again to put it in fastboot mode using vol up and power. Let us know what happens /if you can reach fastboot mode
reg66 said:
Try holding the power button for around 20 secs until it shuts down. Then try vol up and power together and see if you get back to fastboot. If that doesn't work try vol up vol down and power buttons all together. Then try again to put it in fastboot mode using vol up and power. Let us know what happens /if you can reach fastboot mode
Click to expand...
Click to collapse
Unfortunately, nothing. Holding power for 20 seconds showed nothing, and like wise for volume up and power. Battery was fully charged too. Had it plugged in for most of today while I was trying to get fastboot to work.
RichDoe252 said:
Unfortunately, nothing. Holding power for 20 seconds showed nothing, and like wise for volume up and power. Battery was fully charged too. Had it plugged in for most of today while I was trying to get fastboot to work.
Click to expand...
Click to collapse
Is there any sort of illumination to the black screen ie do you think the phone is on but the screen is black or do think the phone is completely off?
Holding power button for a while should switch it off after a while. Try holding for longer than 20 secs, then try booting into fastboot mode
---------- Post added at 04:00 AM ---------- Previous post was at 03:44 AM ----------
Well dude, it's 4 am here. Gotta get some sleep dude. Will check here when I wake. Good luck in the mean time
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
reg66 said:
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
Click to expand...
Click to collapse
Bro get to sleep! Such a good Samaritan
TikiThePug said:
Bro get to sleep! Such a good Samaritan
Click to expand...
Click to collapse
LOL! I would if I could, just can't sleep yet. Hopefully soon tho!
RichDoe252 said:
Unfortunately, nothing. Holding power for 20 seconds showed nothing, and like wise for volume up and power. Battery was fully charged too. Had it plugged in for most of today while I was trying to get fastboot to work.
Click to expand...
Click to collapse
Try a USB 2.0 port? Surprisingly this works for some phones even though it's compatible with 3.0.
reg66 said:
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
Click to expand...
Click to collapse
Well, It's been untouched for a day now, and it still will not react to input. No response from long hold on the power button. I will try again in the morning. Is it possible that I somehow wrote into the BIOS of the phone? Android does use a BIOS, right?
RichDoe252 said:
Well, It's been untouched for a day now, and it still will not react to input. No response from long hold on the power button. I will try again in the morning. Is it possible that I somehow wrote into the BIOS of the phone? Android does use a BIOS, right?
Click to expand...
Click to collapse
Android itself does not have a BIOS, since Android is an OS and BIOS is more similar to firmware. But yes, the phone does have firmware, and it could be that the mismatch in firmware versions (from which you tried to flash), has caused the bootloader to "not know what to do now" when trying to start the phone up.
One thing which comes with all phones with a Qualcomm chipset is something called Qualcomm Crashdump Mode. You can try to see if you can get your phone in EDL (emergency download) mode and restore the correct firmware in that way:
https://www.the***********.com/rog-phone-2-unbrick-guide (URL gets censored for some reason; it should be "the custom droid" with no spaces)
Also, if you continue to have driver issues with connecting the phone to your PC, are you able to test another PC or even a Mac if you have access to one? I find Windows can be a giant pain for getting ADB and fastboot to work properly at times.
Good luck and let us know how it goes.
reg66 said:
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
Click to expand...
Click to collapse
Ok, so here's where I am: I have left the phone unplugged for a long time now. Really had no effect. I just downloaded QPST and I can actually get my computer to see the phone. However, I am still not quite sure how to USE QPST and not make things worse. So this is my plan: I am going to look through the forums here for info on how to use QPST to get my phone working again. Not really sure what that will look like, but fastboot would be a good start. From there, it sounds like I have to get the original firmware back on it, and then go about the process of rooting once again.
Still leaves me with the issue that started me down the path of rooting this phone, but at least it will not longer be bricked.
RichDoe252 said:
Ok, so here's where I am: I have left the phone unplugged for a long time now. Really had no effect. I just downloaded QPST and I can actually get my computer to see the phone. However, I am still not quite sure how to USE QPST and not make things worse. So this is my plan: I am going to look through the forums here for info on how to use QPST to get my phone working again. Not really sure what that will look like, but fastboot would be a good start. From there, it sounds like I have to get the original firmware back on it, and then go about the process of rooting once again.
Still leaves me with the issue that started me down the path of rooting this phone, but at least it will not longer be bricked.
Click to expand...
Click to collapse
You may not HAVE to flash complete firmware, it is quite likely that the boot.img is causing the problem as you flashed an incompatible version. Below you'll flash the correct version which HOPEFULLY will fix your phone, provided you can get into fastboot mode now.
Haven't read back through all the thread so i can't recall all the details of where you're at. As far as i can tell you're still running WW 16.0622.1906.19-0, correct? Can you get the device to now boot into fastboot mode? (from a powered off state, press and hold vol up and power at the same time. You should then be presented with some options, DON'T select any option. With that menu screen open is fastboot mode.
1. Download and install ADB Fastboot from here to C: drive of your pc/laptop.
2. With your phone in fastboot mode (as detailed above) connect it to pc/laptop using the side port of the phone.
3. Navigate to C:\Program Files (x86)\Minimal ADB and Fastboot folder and double click the cmd-here.exe, this will open a cmd window.
4. Type 'fastboot devices' to check that it's recognised, there should be a serial/key shown after entering that cmd.
5. Provided the serial/key is shown in fastboot mode, download the following boot.img (which is for WW 1906.19) from here.
6. Copy that boot img to the same folder you have open for ADB (C:\Program Files (x86)\Minimal ADB and Fastboot)
7. In the cmd window type 'fastboot flash boot boot.img'.
Now, that boot img is the STOCK boot img for your rom version. Don't worry about rooting for now (if i recall correctly, your phone won't boot to system), let's just try to get the phone booting first. Providing there are no errors when flashing the boot img, on the phone fastboot menu, scroll through and choose 'restart'.
Let me know if the device boots to system now... Good luck
I'll pm you my email address so you'll be able to get hold of me if you get stuck at any stage...
EDIT: was forgetting you tried so many times to get into fastboot mode, without success.
---------- Post added at 08:59 PM ---------- Previous post was at 08:17 PM ----------
Dude, is your phone screen still black but switched on? When you tap the screen does it vibrate. I'm thinking you might already be in edl mode (which could be a good thing). Let us know
Check your pm's dude for further info. I can't post links to the site required so have sent via pm
TikiThePug said:
Android itself does not have a BIOS, since Android is an OS and BIOS is more similar to firmware. But yes, the phone does have firmware, and it could be that the mismatch in firmware versions (from which you tried to flash), has caused the bootloader to "not know what to do now" when trying to start the phone up.
One thing which comes with all phones with a Qualcomm chipset is something called Qualcomm Crashdump Mode. You can try to see if you can get your phone in EDL (emergency download) mode and restore the correct firmware in that way:
https://www.the***********.com/rog-phone-2-unbrick-guide (URL gets censored for some reason; it should be "the custom droid" with no spaces)
Also, if you continue to have driver issues with connecting the phone to your PC, are you able to test another PC or even a Mac if you have access to one? I find Windows can be a giant pain for getting ADB and fastboot to work properly at times.
Good luck and let us know how it goes.
Click to expand...
Click to collapse
Just dropping you a quick note to say thanks for thanks! LOL. Yeah, your post earlier seems like the best place to go. Have used Miflash Tool a few times on Xiaomi devices, it's pretty good and straight forward. Should be a LOT easier than using QPST and having to change EMMC to UFS.
Can't remember where i saw it now, but i'm sure i read that if the phone screen is black (but switched on) and vibrates, then it's likely to be in EDL mode already. Which will hopefully be good news for @RichDoe252. Before that (having never been in that situation), i wasn't aware that an all black screen could mean EDL mode is active. Fingers crossed for Rich it'll all work out just fine.
@RichDoe252 If all goes successfully using the QPST file download (and using the Miflash Tool the guide mentions in the pm i sent you) and flashing, DON'T ROOT JUST YET!!!! LOL. Let us know how it goes and then we can look into, and point you in the right direction, for getting you rooted and up to date on latest A9 or A10 whichever you'd prefer
Well I must say Rich, I'm surprised you haven't been back here yet to give any updates on progress!! Sent you a couple of emails through pm... Man, if it was my fairly expensive phone that was in the poo pan, I'd be all over trying to fix it lol
reg66 said:
Well I must say Rich, I'm surprised you haven't been back here yet to give any updates on progress!! Sent you a couple of emails through pm... Man, if it was my fairly expensive phone that was in the poo pan, I'd be all over trying to fix it lol
Click to expand...
Click to collapse
First off, you are a freaking saint. I really do appreciate all the help you have been offering up, and I am sorry I have not been very quick with a response. As my phone currently stands, I get 0% response from anything I do to it. No vibrate, nothing. No indication it even is plugged in. I had it connected to my PC with QPST installed, and it was able to pick up that the phone was there, and then immediately tried to download something to it. Not sure what, not sure why, but that kinda typifiies my interaction with this whole process so far. If you haven't guessed, I'm kinda in over my head.
Back to the problem: QPST started some opperation to download something to it. Wouldn't let me do anything else, said the phone was in "download mode". Either way it stopped at 30% and didn't progress for 30 minutes, so I tried to unplug it and plug it back in. Same interaction. Unable to do anything to the phone, no reaction from the phone what so ever. This was, by the way, plugged into the fastboot side port.
I saw that you PM'ed me, and now I can't find the email notification or the PMs on the site. Forgive me for being unfortunately new at this. I will get back to you bud, and thank you again.
I received my new sony 1 ii and have checked and the bootloader can be unlocked and the phone can be rooted. I thought I was away to the races but I'm mystified. I can't get the phone to boot into fast boot.
I appears I have the drivers in place and the phone is recognized by the computer but no luck with fast boot.
I have searched and can't seem to find out why this is. I suspect some kind of driver issue with win10 but when I connect to the computer with the phone off and hold the up-volume nothing happens. I have also tried to boot into recovery mode and that does not work as well. Any help would be appreciated.
blkair445 said:
I received my new sony 1 ii and have checked and the bootloader can be unlocked and the phone can be rooted. I thought I was away to the races but I'm mystified. I can't get the phone to boot into fast boot.
I appears I have the drivers in place and the phone is recognized by the computer but no luck with fast boot.
I have searched and can't seem to find out why this is. I suspect some kind of driver issue with win10 but when I connect to the computer with the phone off and hold the up-volume nothing happens. I have also tried to boot into recovery mode and that does not work as well. Any help would be appreciated.
Click to expand...
Click to collapse
On Sony devices you need to power off and hold volume up and plug in the USB cable. That should leave the blue LED to indicate fastboot mode. I'm not 100% sure since it's been a while since I've messed around with Sony devices
Thanks for the input. I have done that and am still unable to action ADB - It is a little confusing since the phone only shows the blue light and nothing else.
If I normally boot the phone it will register as an ADB device. I also find it strange that it will not boot into recovery. The android icon flashes but when you release it boots to safe mode. I assume it is a driver issue but it is not revealing its self to me . Cheers
blkair446 said:
Thanks for the input. I have done that and am still unable to action ADB - It is a little confusing since the phone only shows the blue light and nothing else.
If I normally boot the phone it will register as an ADB device. I also find it strange that it will not boot into recovery. The android icon flashes but when you release it boots to safe mode. I assume it is a driver issue but it is not revealing its self to me . Cheers
Click to expand...
Click to collapse
The blue light is fastboot mode. There is no ui interface in fastboot for sony devices. Just a blue light and black screen.
R800x_user said:
On Sony devices you need to power off and hold volume up and plug in the USB cable. That should leave the blue LED to indicate fastboot mode. I'm not 100% sure since it's been a while since I've messed around with Sony devices
Click to expand...
Click to collapse
Same person but had to change user name -- more on the issue
I managed to unlock the boot loader and it seems that at every step for rooting I am running into curve balls. Windows was not working for me so I managed to unlock the bootloader with Linux and going on to the next step I had to go back to windows to find a current factory ROM.
The next issue: going back to the "how to" I am unable to located boot.xxxxx.sin in the factory ROM and the closest I could find is boot_x-Flash-ALL-2389.sin and that doesn't work.
In the boot directory all files are bootloader_X_44 and a combination of zip and sin files
Can anyone steer me through the muddy waters
The factory rom was downloaded through XperiaFirm application
blkair446 said:
Same person but had to change user name -- more on the issue
I managed to unlock the boot loader and it seems that at every step for rooting I am running into curve balls. Windows was not working for me so I managed to unlock the bootloader with Linux and going on to the next step I had to go back to windows to find a current factory ROM.
The next issue: going back to the "how to" I am unable to located boot.xxxxx.sin in the factory ROM and the closest I could find is boot_x-Flash-ALL-2389.sin and that doesn't work.
In the boot directory all files are bootloader_X_44 and a combination of zip and sin files
Can anyone steer me through the muddy waters
The factory rom was downloaded through XperiaFirm application
Click to expand...
Click to collapse
May I know how did you unlock the bootloader? Did you use xperia 1 as your device in https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/#unlock-code?
I have already installed usb drivers and have the platform tools. But everytime I boot my device to fastboot, whether using "adb reboot bootloader" or power button + volume up, screen only shows black (led is solid blue). I did left it for a couple of minutes, nothing happened.
jepher said:
May I know how did you unlock the bootloader? Did you use xperia 1 as your device in ?
I have already installed usb drivers and have the platform tools. But everytime I boot my device to fastboot, whether using "adb reboot bootloader" or power button + volume up, screen only shows black (led is solid blue). I did left it for a couple of minutes, nothing happened.
Click to expand...
Click to collapse
I unlocked my bootloader after obtaining the unlock code from sony developers I used adb/fastboot commands in linux mint. Pretty straight forward but the next step for rooting is giving me issues. Just select xperia 1 and the imei number will identify your phone -- cheers
blkair446 said:
I unlocked my bootloader after obtaining the unlock code from sony developers I used adb/fastboot commands in linux mint. Pretty straight forward but the next step for rooting is giving me issues. Just select xperia 1 and the imei number will identify your phone -- cheers
Click to expand...
Click to collapse
Yes I followed those. But may I know how long it took you to finish the unlocking?
Install ADB/SDK drivers
Download platform tools
Plug the device
Make sure adb can see my device
Use adb reboot bootloader command
Device booted to fastboot mode
Execute the command with the unlock code
...stucked here
If I miss something. Please do let me know
jepher said:
Yes I followed those. But may I know how long it took you to finish the unlocking?
Install ADB/SDK drivers
Download platform tools
Plug the device
Make sure adb can see my device
Use adb reboot bootloader command
Device booted to fastboot mode
Execute the command with the unlock code
...stucked here
If I miss something. Please do let me know
Click to expand...
Click to collapse
I assume you are using windows and I must say I gave up trying to get win10 to work and I was stuck at the same place you are. I then switched to linux and it went a lot smoother and I didn't need all those tools as laid out in the description.
In linux you must use the phone to go into fastboot mode if you boot from computer it actually boots to a visible screen on the phone and I didn't have connection that would take the command line commands. Linux is very good because if you are missing something it will give you a link or a command line input when you execute the ADB or Fastboot command.
I have run a windows/linux dual boot desktop for a while now and I'm no expert but coming from the era of command line I can muddle through. Sorry if I can't give you more info on windows but win10 is such a pain and I find that with a lot of things linux works better. If I didn't need adobe acrobat I would not even bother with windows.
cheers
blkair446 said:
I assume you are using windows and I must say I gave up trying to get win10 to work and I was stuck at the same place you are. I then switched to linux and it went a lot smoother and I didn't need all those tools as laid out in the description.
In linux you must use the phone to go into fastboot mode if you boot from computer it actually boots to a visible screen on the phone and I didn't have connection that would take the command line commands. Linux is very good because if you are missing something it will give you a link or a command line input when you execute the ADB or Fastboot command.
I have run a windows/linux dual boot desktop for a while now and I'm no expert but coming from the era of command line I can muddle through. Sorry if I can't give you more info on windows but win10 is such a pain and I find that with a lot of things linux works better. If I didn't need adobe acrobat I would not even bother with windows.
cheers
Click to expand...
Click to collapse
Yes I am using w10. Will try linux later. I have searched everywhere and stucked at the same step. Thank you.
I have managed to unlock the bootloader and root the phone. But problem is. I can't write on the root folder.
More to this I think I might have located the boot file boot_X-flash-all-2396.sin but using magisk it returns no boot image found. I see the guide says use the canary built but that seems to have been shut down, so at an impasse here and am still reaching out for help - damn op phone were never this funky
I might as well put this one out there then -- Is there anyway to flash a op 8 pro in2025 to dual sim - it's the cause of this painful trip
I was reverting my phone to unroot and locked bootloader. And it is saying that "Your Device is corrupt. It can't be trusted and will not boot" loop.
I tried flashing it using the new flasher. But after flashing, it will do SONY boot loop. If I connect it to a charger it goes back to "Your Device is corrupt. It can't be trusted and will not boot" loop.
I can't use Sony Companion since it is saying that my battery is low, and I can't charge the phone since it will just continue looping.
Do you know/have any recovery.img?
Edt: Fixed my phone. Relocked the bootloader
jepher said:
I was reverting my phone to unroot and locked bootloader. And it is saying that "Your Device is corrupt. It can't be trusted and will not boot" loop.
I tried flashing it using the new flasher. But after flashing, it will do SONY boot loop. If I connect it to a charger it goes back to "Your Device is corrupt. It can't be trusted and will not boot" loop.
I can't use Sony Companion since it is saying that my battery is low, and I can't charge the phone since it will just continue looping.
Do you know/have any recovery.img?
Edt: Fixed my phone. Relocked the bootloader
Click to expand...
Click to collapse
Any chance you could post the steps to relock successfully? I presume using the fastboot commands etc though did you then just re run the command to relock the bootloader? Many thanks
cd993 said:
Any chance you could post the steps to relock successfully? I presume using the fastboot commands etc though did you then just re run the command to relock the bootloader? Many thanks
Click to expand...
Click to collapse
Yes. Relock it using fastboot command.
I use ubuntu to do it. If you can run fastboot commands in windows10 lucky you.