I woke this morning to my Mi A2 unresponsive. Did a reset and phone went into bootloop. Did the same steps 3 weeks ago to flash the stock ROM:
1. Booted the phone in EDL mode
2. Flashed the most recent official ROM with most recent Mi Flash
3. Got this error:
Code:
[12:50:04]:5 COM5 10,4481946s resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: SDCC Error 29 (3)"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Write Failed sector 512, size 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to write 1 slot 0, partition 512, start_sector 97 num_sectors 0, error 3"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 609 and TotalSectorsToProgram 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" />
</data>
What can i do? Thanks.
Related
Has anyone with the i9295 tried following this guide to make a TWRP for the active?
http://www.xda-developers.com/android/compile-twrp-for-your-device/
I tried it today using spegelius' CM-10.2 sources and the compile went through. However, I'm currently a bit scared to flash it (yeah, I know... ). If anyone dares to give a try to my build, send me a PM and I'll send you the recovery.img I got.
This is the roomservice.xml I used:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="spegelius/android_device_samsung_jactivelte" path="device/samsung/jactiveltexx" remote="github" />
<project name="spegelius/android_device_samsung_jactivelte-common" path="device/samsung/jf-common" remote="github" />
<project name="spegelius/android_kernel_samsung_jactivelte" path="kernel/samsung/jactiveltexx" remote="github" />
<project name="CyanogenMod/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" />
<project name="CyanogenMod/android_device_samsung_msm8960-common" path="device/samsung/msm8960-common" remote="github" />
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" />
<project name="CyanogenMod/android_device_samsung_jfltexx" path="device/samsung/jfltexx" remote="github" />
<project name="CyanogenMod/android_device_samsung_jf-common" path="device/samsung/jf-common" remote="github" />
<project name="CyanogenMod/android_kernel_samsung_jf" path="kernel/samsung/jf" remote="github" />
<remove-project name="CyanogenMod/android_bootable_recovery" />
<project name="omnirom/android_bootable_recovery" path="bootable/recovery" remote="github" revision="android-4.3" />
</manifest>
Additionally I added the following in the device/samsung/jf-common/BoardConfigCommon.mk. This is esentially the same as for the S4 except the Screen-Brightness-Regulation, which I suppose is different due to a different LCD (but TWRP should work without any brightness-regulation at all):
Code:
#TWRP
DEVICE_RESOLUTION := 1080x1920
RECOVERY_GRAPHICS_USE_LINELENGTH := true
RECOVERY_SDCARD_ON_DATA := true
TW_INTERNAL_STORAGE_PATH := "/data/media/0"
TW_INTERNAL_STORAGE_MOUNT_POINT := "data"
TW_EXTERNAL_STORAGE_PATH := "/external_sd"
TW_EXTERNAL_STORAGE_MOUNT_POINT := "external_sd"
TW_NO_REBOOT_BOOTLOADER := true
TW_HAS_DOWNLOAD_MODE := true
BOARD_HAS_NO_REAL_SDCARD := true
TW_INCLUDE_CRYPTO := true
TW_INCLUDE_CRYPTO_SAMSUNG := true
TW_CRYPTO_FS_TYPE := "ext4"
TW_CRYPTO_REAL_BLKDEV := "/dev/block/mmcblk0p29"
TW_CRYPTO_MNT_POINT := "/data"
TW_CRYPTO_FS_OPTIONS := "nosuid,nodev,noatime,noauto_da_alloc,discard,journal_async_commit,errors=panic wait,check,encryptable=footer"
TW_CRYPTO_FS_FLAGS := "0x00000406"
TW_CRYPTO_KEY_LOC := "footer"
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun0/file
TWRP_EVENT_LOGGING := true
I used the same recovery.fstab / twrp.fstab as for the S4.
TWRP S4 Active i9295
floeti said:
I tried it today using spegelius' CM-10.2 sources and the compile went through. However, I'm currently a bit scared to flash it (yeah, I know... ). If anyone dares to give a try to my build, send me a PM and I'll send you the recovery.img I got.
This is the roomservice.xml I used:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="spegelius/android_device_samsung_jactivelte" path="device/samsung/jactiveltexx" remote="github" />
<project name="spegelius/android_device_samsung_jactivelte-common" path="device/samsung/jf-common" remote="github" />
<project name="spegelius/android_kernel_samsung_jactivelte" path="kernel/samsung/jactiveltexx" remote="github" />
<project name="CyanogenMod/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" />
<project name="CyanogenMod/android_device_samsung_msm8960-common" path="device/samsung/msm8960-common" remote="github" />
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" />
<project name="CyanogenMod/android_device_samsung_jfltexx" path="device/samsung/jfltexx" remote="github" />
<project name="CyanogenMod/android_device_samsung_jf-common" path="device/samsung/jf-common" remote="github" />
<project name="CyanogenMod/android_kernel_samsung_jf" path="kernel/samsung/jf" remote="github" />
<remove-project name="CyanogenMod/android_bootable_recovery" />
<project name="omnirom/android_bootable_recovery" path="bootable/recovery" remote="github" revision="android-4.3" />
</manifest>
Additionally I added the following in the device/samsung/jf-common/BoardConfigCommon.mk. This is esentially the same as for the S4 except the Screen-Brightness-Regulation, which I suppose is different due to a different LCD (but TWRP should work without any brightness-regulation at all):
Code:
#TWRP
DEVICE_RESOLUTION := 1080x1920
RECOVERY_GRAPHICS_USE_LINELENGTH := true
RECOVERY_SDCARD_ON_DATA := true
TW_INTERNAL_STORAGE_PATH := "/data/media/0"
TW_INTERNAL_STORAGE_MOUNT_POINT := "data"
TW_EXTERNAL_STORAGE_PATH := "/external_sd"
TW_EXTERNAL_STORAGE_MOUNT_POINT := "external_sd"
TW_NO_REBOOT_BOOTLOADER := true
TW_HAS_DOWNLOAD_MODE := true
BOARD_HAS_NO_REAL_SDCARD := true
TW_INCLUDE_CRYPTO := true
TW_INCLUDE_CRYPTO_SAMSUNG := true
TW_CRYPTO_FS_TYPE := "ext4"
TW_CRYPTO_REAL_BLKDEV := "/dev/block/mmcblk0p29"
TW_CRYPTO_MNT_POINT := "/data"
TW_CRYPTO_FS_OPTIONS := "nosuid,nodev,noatime,noauto_da_alloc,discard,journal_async_commit,errors=panic wait,check,encryptable=footer"
TW_CRYPTO_FS_FLAGS := "0x00000406"
TW_CRYPTO_KEY_LOC := "footer"
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun0/file
TWRP_EVENT_LOGGING := true
I used the same recovery.fstab / twrp.fstab as for the S4.
Click to expand...
Click to collapse
Has anyone tried this? did it work ? i want to install TWRP on my S$ Active i9295
Cheers,
does galaxy s4 active have twrp
Is there a twrp for galaxy s4 active because I really need it
johnathanw22 said:
Is there a twrp for galaxy s4 active because I really need it
Click to expand...
Click to collapse
not at the moment
I want to build 12.1 CAF
this way is right?
Code:
Checking out files: 100% (13/13), done.king out files: 30% (4/13)
Checking out files: 100% (168/168), done.
Syncing work tree: 100% (556/556), done.
[email protected] ~/cm12.1 $ . build/envsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-mips/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including vendor/cm/vendorsetup.sh
including sdk/bash_completion/adb.bash
including vendor/cm/bash_completion/git.bash
including vendor/cm/bash_completion/repo.bash
[email protected] ~/cm12.1 $ lunch
You're building on Linux
Lunch menu... pick a combo:
1. aosp_arm-eng 54. cm_kltechnduo-userdebug
2. aosp_arm64-eng 55. cm_kltespr-userdebug
3. aosp_mips-eng 56. cm_l900-userdebug
4. aosp_mips64-eng 57. cm_m7-userdebug
5. aosp_x86-eng 58. cm_m7vzw-userdebug
6. aosp_x86_64-eng 59. cm_m8-userdebug
7. m_e_arm-userdebug 60. cm_mako-userdebug
8. mini_emulator_mips-userdebug 61. cm_manta-userdebug
9. mini_emulator_x86_64-userdebug 62. cm_maserati-userdebug
10. mini_emulator_arm64-userdebug 63. cm_mb886-userdebug
11. mini_emulator_x86-userdebug 64. cm_mondrianwifi-userdebug
12. cm_acclaim-userdebug 65. cm_n3-userdebug
13. cm_amami-userdebug 66. cm_n5100-userdebug
14. cm_bacon-userdebug 67. cm_n5110-userdebug
15. cm_castor-userdebug 68. cm_nicki-userdebug
16. cm_castor_windy-userdebug 69. cm_obake-userdebug
17. cm_condor-userdebug 70. cm_peregrine-userdebug
18. cm_d2att-userdebug 71. cm_picassowifi-userdebug
19. cm_d2spr-userdebug 72. cm_quark-userdebug
20. cm_d2tmo-userdebug 73. cm_scorpion-userdebug
21. cm_d2vzw-userdebug 74. cm_scorpion_windy-userdebug
22. cm_d850-userdebug 75. cm_serrano3gxx-userdebug
23. cm_d851-userdebug 76. cm_serranoltexx-userdebug
24. cm_d852-userdebug 77. cm_shamu-userdebug
25. cm_d855-userdebug 78. cm_sirius-userdebug
26. cm_deb-userdebug 79. cm_spyder-userdebug
27. cm_dlx-userdebug 80. cm_superior-userdebug
28. cm_e975-userdebug 81. cm_t0lte-userdebug
29. cm_e980-userdebug 82. cm_t6-userdebug
30. cm_evita-userdebug 83. cm_t6spr-userdebug
31. cm_falcon-userdebug 84. cm_t6vzw-userdebug
32. cm_find7-userdebug 85. cm_targa-userdebug
33. cm_find7s-userdebug 86. cm_tf300t-userdebug
34. cm_flo-userdebug 87. cm_thea-userdebug
35. cm_fugu-userdebug 88. cm_tilapia-userdebug
36. cm_ghost-userdebug 89. cm_titan-userdebug
37. cm_grouper-userdebug 90. cm_togari-userdebug
38. cm_hammerhead-userdebug 91. cm_togari_gpe-userdebug
39. cm_hammerheadcaf-userdebug 92. cm_trltetmo-userdebug
40. cm_hlte-userdebug 93. cm_trltexx-userdebug
41. cm_hltespr-userdebug 94. cm_umts_spyder-userdebug
42. cm_hltetmo-userdebug 95. cm_v410-userdebug
43. cm_i605-userdebug 96. cm_v500-userdebug
44. cm_i925-userdebug 97. cm_victara-userdebug
45. cm_honami-userdebug 98. cm_ville-userdebug
46. cm_jflteatt-userdebug 99. cm_vs985-userdebug
47. cm_jfltespr-userdebug 100. cm_xt897-userdebug
48. cm_jfltetmo-userdebug 101. cm_xt907-userdebug
49. cm_jfltevzw-userdebug 102. cm_xt925-userdebug
50. cm_jfltexx-userdebug 103. cm_xt926-userdebug
51. cm_klimtwifi-userdebug 104. cm_z3-userdebug
52. cm_klte-userdebug 105. cm_z3c-userdebug
53. cm_kltechn-userdebug
Which would you like? [aosp_arm-eng] 39
ls: невозможно получить доступ к device/*/hammerheadcaf/cm.mk: Нет такого файла или каталога
build/core/product_config.mk:234: *** Can not locate config makefile for product "cm_hammerheadcaf". Останов.
Device hammerheadcaf not found. Attempting to retrieve device repository from CyanogenMod Github ([url]http://github.com/CyanogenMod[/url]).
Found repository: android_device_lge_hammerheadcaf
Default revision: cm-12.1
Checking branch info
Adding dependency: CyanogenMod/android_device_lge_hammerheadcaf -> device/lge/hammerheadcaf
Using default branch for android_device_lge_hammerheadcaf
Syncing repository to retrieve project.
Fetching project CyanogenMod/android_device_lge_hammerheadcaf
Fetching projects: 100% (1/1), done.
Repository synced!
Looking for dependencies
Adding dependencies to manifest
Adding dependency: CyanogenMod/android_kernel_lge_hammerhead -> kernel/lge/hammerhead
Adding dependency: CyanogenMod/android_device_qcom_common -> device/qcom/common
Using default branch for android_device_qcom_common
Syncing dependencies
Fetching project CyanogenMod/android_device_qcom_common
Fetching project CyanogenMod/android_kernel_lge_hammerhead
Fetching projects: 100% (2/2), done.
Checking out files: 100% (41719/41719), done.
Looking for dependencies
Dependencies file not found, bailing out.
Looking for dependencies
Dependencies file not found, bailing out.
Done
build/core/product_config.mk:239: *** _nic.PRODUCTS.[[device/lge/hammerheadcaf/cm.mk]]: "vendor/lge/hammerheadcaf/hammerheadcaf-vendor.mk" does not exist. Останов.
** Don't have a product spec for: 'cm_hammerheadcaf'
** Do you have the right repo manifest?
then open
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_lge_hammerheadcaf" path="device/lge/hammerheadcaf" remote="github" />
<project name="CyanogenMod/android_kernel_lge_hammerhead" path="kernel/lge/hammerhead" remote="github" revision="cm-12.1-caf" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
</manifest>
and add this
https://github.com/TheMuppets/proprietary_vendor_lge/tree/cm-12.1
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_lge_hammerheadcaf" path="device/lge/hammerheadcaf" remote="github" />
<project name="TheMuppets/proprietary_vendor_lge" remote="github" revision="cm-12.1" />
<project name="CyanogenMod/android_kernel_lge_hammerhead" path="kernel/lge/hammerhead" remote="github" revision="cm-12.1-caf" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
</manifest>
and again repo sync -j5
right ? or need something else to fix for a good build? if need,please show me example ...
thx.
I think so right
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_lge_hammerheadcaf" path="device/lge/hammerheadcaf" remote="github" />
<project name="CyanogenMod/android_kernel_lge_hammerhead" path="kernel/lge/hammerhead" remote="github" revision="cm-12.1-caf" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="myfluxi/proprietary_vendor_lge" path="vendor/lge" remote="github" revision="cm-12.1" />
</manifest>
not build
Code:
target SharedLib: libRSDriver (/home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/LINKED/libRSDriver.so)
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdAllocation.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdBcc.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdCore.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdElement.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdFrameBuffer.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdFrameBufferObj.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdGL.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdMesh.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdMeshObj.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdPath.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdProgram.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdProgramRaster.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdProgramStore.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdRuntimeStubs.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdSampler.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdScriptGroup.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdShader.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdShaderCache.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdType.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8/arm-linux-androideabi/bin/ld: error: /home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/driver/rsdVertexArray.o: file is empty
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [/home/garynych/cm12.1/out/target/product/hammerheadcaf/obj/SHARED_LIBRARIES/libRSDriver_intermediates/LINKED/libRSDriver.so] Ошибка 1
make: *** Ожидание завершения заданий...
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
[email protected] ~/cm12.1 $
tell me what's wrong? how fix?
Delete the folder local_manifests in .repo and do the following:
$ . build/envsetup.sh
$ lunch -> and choose the number that matches with cm_hammerhead-userdebug
Wait for the roomservice.xml sync and when it's done open the file and add at the top: <project name="TheMuppets/proprietary_vendor_lge" path="vendor/lge" remote="github" revision="cm-12.1" />
$ repo sync
and
$ brunch hammerhead
Your roomservice needs to look like this:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="TheMuppets/proprietary_vendor_lge" path="vendor/lge" remote="github" revision="cm-12.1" />
<project name="CyanogenMod/android_device_lge_hammerhead" path="device/lge/hammerhead" remote="github" />
<project name="CyanogenMod/android_kernel_lge_hammerhead" path="kernel/lge/hammerhead" remote="github" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
</manifest>
Next time just do:
$ . build/envsetup.sh
$ breakfast hammerhead
$ brunch hammerhead
PS: WHIT THIS STEPS YOU'LL BUILD NON CAF. FOR CAF CHECK IN LUNCH MENU FOR IT
Be happy!
Cristiano Matos
how to build cm12.1 i`m know
me need build exactly CAF variant,but after 2h build is error
garynych said:
Cristiano Matos
how to build cm12.1 i`m know
me need build exactly CAF variant,but after 2h build is error
Click to expand...
Click to collapse
Which linux distro do you use?
garynych said:
Cristiano Matos
how to build cm12.1 i`m know
me need build exactly CAF variant,but after 2h build is error
Click to expand...
Click to collapse
You're a smart person may i presume. The answer lies in my post. Regards
Snoop05 said:
Which linux distro do you use?
Click to expand...
Click to collapse
mint 17.1 rebecca (x64)
Cristiano Matos said:
You're a smart person may i presume. The answer lies in my post. Regards
Click to expand...
Click to collapse
sorry,maybe that's the problem with online translator google
am try
1
Delete the folder local_manifests in .repo and do the following:
$ . build/envsetup.sh
$ lunch -> and choose the number that matches with cm_hammerhead-userdebug
Click to expand...
Click to collapse
yes
2
Wait for the roomservice.xml sync and when it's done open the file and add at the top: <project name="TheMuppets/proprietary_vendor_lge" path="vendor/lge" remote="github" revision="cm-12.1" />
$ repo sync
Click to expand...
Click to collapse
yes
3
Next time just do:
$ . build/envsetup.sh
$ breakfast hammerhead
$ brunch hammerhead
Click to expand...
Click to collapse
$ . build/envsetup.sh
$ breakfast hammerheadcaf
$ brunch hammerheadcaf
no build
or
$ . build/envsetup.sh
$ lunch cm_hammerheadcaf-user
$ make -j3 otapackage
or
$ . build/envsetup.sh
$ lunch cm_hammerheadcaf-user
$ mka -j3 otapackage
no build
or
$ . build/envsetup.sh
$ lunch cm_hammerheadcaf-userdebug
$ mka -j3 otapackage
no build
all time ,this error
Which python version you use?
when my aosp buildbox is ready, i will try to build a cm12.1 caf... my build time is only 20min so that helps
Snoop05 said:
Which python version you use?
Click to expand...
Click to collapse
Python 2.7.6 (default, Mar 22 2014, 22:59:56)
[GCC 4.8.2] on linux2
now I did so
make clobber
ccache -C
and start build
already it's been 3 hours,I think must collect
Try it like this:
. build/envsetup.sh
lunch
39
breakfast hammerheadcaf
brunch hammerheadcaf
because i followed what Cristiano Matos sed and it works for me...
build.sh
Code:
#!/bin/bash
make clobber
repo sync -j16
source build/envsetup.sh
breakfast hammerheadcaf
mka bacon
cd $OUT
.repo/local_manifests/roomservice.xml
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="CyanogenMod/android_device_lge_hammerhead" path="device/lge/hammerhead" remote="github" />
<project name="CyanogenMod/android_kernel_lge_hammerhead" path="kernel/lge/hammerhead" remote="github" revision="cm-12.1-caf" />
<project name="CyanogenMod/android_device_lge_hammerheadcaf" path="device/lge/hammerheadcaf" remote="github" />
<project name="TheMuppets/proprietary_vendor_lge" path="vendor/lge" remote="github" revision="cm-12.1"/>
</manifest>
This worked for me. If problem persist try to reinstall all dependencies (check cm build wiki), gcc, g++, python and openjdk
garynych said:
now I did so
make clobber
ccache -C
and start build
already it's been 3 hours,I think must collect
Click to expand...
Click to collapse
this help me
build completed successfully
to everyone who helped,thank you
I'm happy
it is not activated with the latest version of the xposed installer 31-10-2017 module: device emulator
Mensage Error:
Module is disabled in xposed
enabled_modules.xml
?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<int name="com.device.emulator.pro" value="1" />
</map>
Link installer: https://forum.xda-developers.com/devdb/project/?id=13191#downloads
2 days ago i bought edl account from s-unlock web site. The guy wrote me from whatsapp and we started to unbrick process from teamviewer. He bounds the account for my pc but while flashing latest Chinese rom we got that error multiple times. He wastes 4 account for that process.
[16:53:17]:5 COM5 3,4904387s [16:53:17 COM5]:dump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication." /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
What's that error points for?
P.S: After that i tried to sideload Miui 9.6.7 Global from XiaomiADB. It flashed succesfully but wont boot again. Also i tried to flash Chinese 9.6.7 from XiaomiADB it won't flash due to license etc. errors. It's too weird that i can sideload Global rom but i can't sideload Chinese rom for my Chinese device.
Xda is a dead community now. Thanks for no answer. While 2010s someone could make a jailbreak for our devices for unbricking.
OzanSRC said:
Xda is a dead community now. Thanks for no answer. While 2010s someone could make a jailbreak for our devices for unbricking.
Click to expand...
Click to collapse
Once upon a time...
Hi guys, my MI A2 have a edl mode, and i need flash stock rom, but, i have the problems(log file):
[00:00:42]:0 COM9 5,0475537s [00:00:42 COM9]:dump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication."/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" />
</data>
[00:25:03]:9 COM9 4,0064887s [00:25:03 COM9]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Only nop and sig tag can be recevied before authentication."/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" />
</data>
[00:26:1
PHP:
3]:9 COM9 74,0407942s Elemento raiz inexistente.
[00:29:02]:9 COM9 0,5908906s [00:29:02 COM9]:System.IO.IOException: Recurso solicitado em uso.
em System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
em System.IO.Ports.SerialStream..ctor(String portName, Int32 baudRate, Parity parity, Int32 dataBits, StopBits stopBits, Int32 readTimeout, Int32 writeTimeout, Handshake handshake, Boolean dtrEnable, Boolean rtsEnable, Boolean discardNull, Byte parityReplace)
em System.IO.Ports.SerialPort.Open()
em XiaoMiFlash.code.bl.SerialPortDevice.registerPort(SerialPort port)
em XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() em System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
em System.IO.Ports.SerialStream..ctor(String portName, Int32 baudRate, Parity parity, Int32 dataBits, StopBits stopBits, Int32 readTimeout, Int32 writeTimeout, Handshake handshake, Boolean dtrEnable, Boolean rtsEnable, Boolean discardNull, Byte parityReplace)
em System.IO.Ports.SerialPort.Open()
em XiaoMiFlash.code.bl.SerialPortDevice.registerPort(SerialPort port)
em XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[00:30:56]:8 COM8 9,9252977s [00:30:56 COM8]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: SDCC Error 3 (3)"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Write Failed sector 512, size 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to write 1 slot 0, partition 512, start_sector 97 num_sectors 0, error 3"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 609 and TotalSectorsToProgram 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" />
</data>
[00:34:39]:8 COM8 9,5074713s [00:34:39 COM8]:resdump:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: SDCC Error 3 (3)"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Write Failed sector 512, size 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to write 1 slot 0, partition 512, start_sector 97 num_sectors 0, error 3"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="Finished programming start_sector 609 and TotalSectorsToProgram 97"/>
</data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" />
</data>
The main error is: SDCC error 3, failed to write. I did not understand it.
Download Different MI FLASH TOOL With Installation files which have all the drives
Hello! How did u solved this problems!?