Just wondering if anybody could please help me out, I've been looking for a particular file to unbrick my phone using QFIL as it's stuck in fastboot and I've had no success through the command prompt.
The file in question is titled " NONHLOS_ONLY__ze620kl_QFIL_15.0501.1711.36.tar.gz "
Surely somebody has it laying around on their computer that could reupload it, thank you very much!
Issue solved, although I have no IMEI or baseband if sombody could please help!
asusasus55 said:
Just wondering if anybody could please help me out, I've been looking for a particular file to unbrick my phone using QFIL as it's stuck in fastboot and I've had no success through the command prompt.
The file in question is titled " NONHLOS_ONLY__ze620kl_QFIL_15.0501.1711.36.tar.gz "
Surely somebody has it laying around on their computer that could reupload it, thank you very much!
Click to expand...
Click to collapse
how did you solve the problem?
my phone is also locked in fastboot mode
sant0aqw said:
how did you solve the problem?
my phone is also locked in fastboot mode
Click to expand...
Click to collapse
You'll have to put your phone in EDL mode and use QFIL to unbrick it. I had to open my phone and use the test points inside to get it to connect. You'll be able to find a tutorial and the files needed here: https://firmwarex.net/asus-zenfone-5-ze620kl-official-firmware/
Related
Hey guys I attempted to S OFF my phone and it was going swimmingly until my mother unplugged my phone while I wasn't looking.
It got stuck in a bootloop and I'm not sure what to do.
Any help would be appreciated.
Thanks
Eshraq said:
Hey guys I attempted to S OFF my phone and it was going swimmingly until my mother unplugged my phone while I wasn't looking.
It got stuck in a bootloop and I'm not sure what to do.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
maybe you can try ruu to get it back
chapter007 said:
maybe you can try ruu to get it back
Click to expand...
Click to collapse
To run RUU, the phone has to be able to be recognized by the computer, and if its doing what his device is doing won't be able to be read at all.
Sent from my HTC first using XDA Premium 4 mobile app
Eshraq said:
Hey guys I attempted to S OFF my phone and it was going swimmingly until my mother unplugged my phone while I wasn't looking.
It got stuck in a bootloop and I'm not sure what to do.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
ok with RUU is possible
try this:
Download ruu file
http://www.androidruu.com/?developer=Myst
RUU_MYST_UL_Cingular_US_1.08.502.1_Radio_1.15.40.00.13_2_10.64.40.33AL_release_316579_signed_2.exe
open the file RUU.exe and leave it open
type key windows+ R, write %temp%
this open windows temp , here decompresses RUU file
in temp folder you find a folder name this 91B0E17D-0DCF-409F-AECF-45012397AC62 (example) or similar
browse rom.zip a copy in desktop
you need fastboot, search tutorials for fastboot, is very easy, install drivers etc...
reset your phone in booloader (power + vol-)
in windows open a terminal
put fastboot and adb in desktop and open it in terminal
in terminal type
fastboot oem rebootRUU
your phone star in RUU mode
in terminal type
fastboot flash zip rom.zip
it’s all! you wait for install the rom a few minutes
PD: block the booloader again... fastboot oem lock booloader and install the stock recovery this is indispensable for install!!!!
Thanks for the help
Sorry that this is such a late reply but I was on vacation.
I figured it out by relocking the bootloader with the fastboot command and then just running the ruu files.
Hi, I have LG D405N with hard brick (bad recovery.img flashed). From this moment phone doesn't give any signals.
Trying to solve this problem, by copy aboot.img to partition on linux system.
Not work. I think i have a bad aboot.img.
Anyone can help me?
Are you able to get to download mode? If so flash the KDZ.
same problem no download mode i need aboot file please
k01vu said:
Hi, I have LG D405N with hard brick (bad recovery.img flashed). From this moment phone doesn't give any signals.
Trying to solve this problem, by copy aboot.img to partition on linux system.
Not work. I think i have a bad aboot.img.
Anyone can help me?
Click to expand...
Click to collapse
see my guide here: http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429
Hello
Can anyome help me please? I bricked my Lg L90 P405n after choose bad recovery.img file. Phone is dead, when i connect it to the computer, i see Android USB serial device and one drive with etc 60MB capacity.
I tried some advices from forum, but nothing was succesful.
Now i see phone as QUALCOM USB .... device , but when i set boardiag and click on Start button a see message Failed during loading flash programmer, Test aborted when i choose G2MLTE (MSM8926) and Device was not found in dload trying flash programmer when i choose W7 (MSM8226).
Attempts over LG Flash tool ended after 4% with error communication with the phone.
Have anyone correct method for D405n and correct MBM files with partition.txt?
Thank you
Martin
mcambel said:
Hello
Can anyome help me please? I bricked my Lg L90 P405n after choose bad recovery.img file. Phone is dead, when i connect it to the computer, i see Android USB serial device and one drive with etc 60MB capacity.
I tried some advices from forum, but nothing was succesful.
Now i see phone as QUALCOM USB .... device , but when i set boardiag and click on Start button a see message Failed during loading flash programmer, Test aborted when i choose G2MLTE (MSM8926) and Device was not found in dload trying flash programmer when i choose W7 (MSM8226).
Attempts over LG Flash tool ended after 4% with error communication with the phone.
Have anyone correct method for D405n and correct MBM files with partition.txt?
Thank you
Martin
Click to expand...
Click to collapse
Did you choose the right Com Port in b2b?
Yes i choose correct one. Today i make some other things and now is phone functional, but after restore phone lost IMEI information.
I use advice in this post http://forum.xda-developers.com/showpost.php?p=61636749&postcount=34.
Next question - is some way to restore/fill IMEI ?
Help! I think i flashed something wrong for my Z2Pro, now it's stuck in recovery/fastboot mode, i can still access the menu, but i cannot flash anything via fastboot, my computer says waiting for adb device, inputting the command adb devices show nothing. Trying to flash stock ROM via QFIL but instead of port 9008, its showing port 900E, if i try to flash, it says this:
Download Fail: Switch to EDL Fail Failed to switch to Emergency Download Mode.
@OP
Try this method, I think you'll be OK!
But you need to use Google Translation!
and download a Rom from the "Rom Section".
Good luck.
http://www.zukfans.it/2016/07/06/gu...procedure-di-aggiornamento-sui-terminali-zuk/
Edit: I just saw your thread over "ZUK Fans Europe", I'm glad you got it working again!
Yup! Thanks!
Guys I am facing the exact same problem.
Could you please let me know how you resolved it.
Thanks
@digitalguy13 and @alvintan38, did you already solve it? I have the same problem
DavidWel said:
@digitalguy13 and @alvintan38, did you already solve it? I have the same problem
Click to expand...
Click to collapse
Maybe you can get it to work trying this guide: http://www.androidbrick.com/zuk-z2-z2-pro-qpst-qfil-miflash-rom-flashing-guide/
Thanks for the suggestion, I managed to fix the 900e message using the DIY cable. This was a really easy solution So for anyone, which encouters the same problem, just follow the guide from zukfans called "deep-flash-revive-your-zuk-z2-from-hard-brick-state-9008-mode-easily" (sorry, I'm not allowed to post links yet)
Guys I was trying to do unlock my ROG Phone II with EDL mode:
https://forum.xda-developers.com/rog-phone-2/how-to/how-to-unlock-rog2-phone-via-edl-mode-t4008267
My phone is still in edl mode it shows as a COM port in my pc. I really need help I cannot do anything. I tried to flash it in MiFlash and it gives an error every time. Please help me!!!!!!!! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I NEED HELP IMMIDIETELY PLEASE
The app works just fine... Also why are you trying to use a Xiaomi flash tool on an Asus device?
Get out of EDL mode with vol- vol+ power all three together.
EfeKamil said:
Guys I was trying to do unlock my ROG Phone II with EDL mode:
https://forum.xda-developers.com/rog-phone-2/how-to/how-to-unlock-rog2-phone-via-edl-mode-t4008267
My phone is still in edl mode it shows as a COM port in my pc. I really need help I cannot do anything. I tried to flash it in MiFlash and it gives an error every time. Please help me!!!!!!!! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I NEED HELP IMMIDIETELY PLEASE
Click to expand...
Click to collapse
Have you tried doing the process with the correct drivers installed? (I have not done this method, but it could be driver related) See here for drivers
EDIT: at the bottom of your EDL thread it does state you need the Qualcom drivers installed, not sure if they're the same as the ones i linked to, but the ones in that thread are here
Also, this post may be of some use to you, might wanna read the rest of the thread too for tips...
'I read somewhere that you must start the EDL unlocking process as soon as you run the fastboot command to boot it into EDL mode. It wouldn't run correctly for me at first, but then I rebooted into fastboot, ran the enter dload command, then immediately ran the unlocker (or if it fails because your device hasn't entered EDL mode just yet, keep spamming it).
I have no idea why that's the case but it worked for me.'
My Red Magic 3 stuck in fastboot mode. I can enter the recovery mode. I tried to wipe all the data, and after that i reboot the phone, still stuck in fastboot mode. Also, because of the wipe, I think it disabled USB Debugging.
Can someone help me plz? The only way I know is take out the battery for while. But im not sure how to do that. Also, I can maybe wait for the battery run out, but it may take a long time.
sorry for my bad grammar
fafa123321 said:
My Red Magic 3 stuck in fastboot mode. I can enter the recovery mode. I tried to wipe all the data, and after that i reboot the phone, still stuck in fastboot mode. Also, because of the wipe, I think it disabled USB Debugging.
Can someone help me plz? The only way I know is take out the battery for while. But im not sure how to do that. Also, I can maybe wait for the battery run out, but it may take a long time.
sorry for my bad grammar
Click to expand...
Click to collapse
use unbrick tool put your phone in edl mode and flash it
walkwitmeinhel said:
use unbrick tool put your phone in edl mode and flash it
Click to expand...
Click to collapse
What is EDL mode? im new to this
fafa123321 said:
What is EDL mode? im new to this
Click to expand...
Click to collapse
Just search for red magic 3 unbrick tool on Google it'll give you a link to download a file, there will also be a word file to assist you
reuben_46 said:
Just search for red magic 3 unbrick tool on Google it'll give you a link to download a file, there will also be a word file to assist you
Click to expand...
Click to collapse
Thank you I will try that!
fafa123321 said:
Thank you I will try that!
Click to expand...
Click to collapse
Did it work?
reuben_46 said:
Did it work?
Click to expand...
Click to collapse
New problem occur. I booted my phone, and i cant turn on wifi. I viewed some post and noticed that i have to reflash the boot.img. I tried it but it doesnt work.
reuben_46 said:
Did it work?
Click to expand...
Click to collapse
the unbrick tool doesnt work for me. I tried flash everything i can in fastboot, and it booted up
Edit: I think the unbrick tool doesnt work is the cable or the port's problem..
Well i dont know why but when i tried to install the chinese rom in recovery, it stuck at 25% and told me that the install failed
does anyone have the boot.img for ENCommon_V1.09? I think i might need that