Me176CX Update Problems - MeMO Pad 7 Q&A, Help & Troubleshooting

Hello everybody,
first of all, I would like to apologize for my English. The Google translator helps me to explain my concern to you.
I know that the life of this tablet is actually long gone, but I would still like to revive it. I don't want to buy a new tablet while it is still working. It should only be used for watching movies and surfing the Internet a little.
I bought the tablet with Android 4.4 back then. During the last update to Android 5.0 it was bricked. A few months later I got it working again thanks to some instructions here. However, I could no longer install an update. At some point it disappeared in the box.
I found it again a few days ago. I tried to install the updates with various instructions so that I can install LineAgeOS 16.0 later. Unfortunately, the same error message keeps coming up when I try to install an update. I do not know how to continue. Maybe someone of you can help me.
I have already tried the following instructions:
1st Link
2nd Link
I wanted to try these instructions, but unfortunately could not find the Intel PhoneFlashTool:
3rd Link
That is the error message I always get.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Greetings - Peter

Have you tried flashing https://dlcdnets.asus.com/pub/ASUS/EeePAD/ME176C/UL-K013-WW-12.10.1.36_KK-user.zip (note: I assume that you are still on Android 4.4)

Hello and thank you for your reply.
It is a bit difficult for me to explain my individual steps because my English is not very good and the google translator sometimes spits out strange cryptic blocks of words.
Yes, i tried this File too. But after flashing this, i get into a Bootloop.
if the tablet does not start and I try to flash this file, I get a bootloop. I also tried to install this File when UL-K013-WW-3.2.23.182-user.zip is installed and started successfully. But even then I get a bootloop.
the only two versions that I can flash that also start without a bootloop are UL-K013-WW-3.2.23.182-user.zip and UL-K013-CN-3.2.23.182-user.zip. But with both versions I cannot install updates. After flashing the version cn, I saw that this is the version for China.
Yes, i am on Android 4.4.2
Is the Error "Unable to find Partition size for '/FWUP'" normal?
Greetings - Peter

cody3264 said:
It is a bit difficult for me to explain my individual steps because my English is not very good and the google translator sometimes spits out strange cryptic blocks of words.
Click to expand...
Click to collapse
What is your native language?
cody3264 said:
Yes, i tried this File too. But after flashing this, i get into a Bootloop.
if the tablet does not start and I try to flash this file, I get a bootloop. I also tried to install this File when UL-K013-WW-3.2.23.182-user.zip is installed and started successfully. But even then I get a bootloop.
the only two versions that I can flash that also start without a bootloop are UL-K013-WW-3.2.23.182-user.zip and UL-K013-CN-3.2.23.182-user.zip. But with both versions I cannot install updates. After flashing the version cn, I saw that this is the version for China.
Yes, i am on Android 4.4.2
Is the Error "Unable to find Partition size for '/FWUP'" normal?
Click to expand...
Click to collapse
It doesn't sound good at least.

I am from Austria. German is my native Language.

cody3264 said:
I am from Austria. German is my native Language.
Click to expand...
Click to collapse
I'm not sure I'm really able to help you (I have no experience with upgrading from Android 4.4) but if it's easier for you can send me a private message in German.

Nobody here who can help me with my problem?
Niemand hier der mir mit meinem Problem helfen kann?

Hello, sorry for necro, but im reviving this tablet aswell, i have the same problem as you, able to install only the one specified firmware and nothing else.
Could you let me know, if you have figured out something?
Thanks!
EDIT:I fixed my issue, checkout the thread i made!

Related

[ROM TEST] PPC-SHIFTPDA SERIES WP7S H1 (07.Feb)

[ROM BLACK STONE TEST] PPC-SHIFTPDA SERIES WP7S H1 (07.FEB)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Change remove titanium, manila. add WP7S Host v1.5. build 29007, language WWE.
Thank for all, I remove link, fix rom.
can not download
@boyppc
Any other details?!
RAM on boot, more(& bigger) pictures...
Thx!
does anyone try it?
@anukult
There's nothin' wrong with DOWNLOAD, keep tryin'
teti77 said:
@anukult
There's nothin' wrong with DOWNLOAD, keep tryin'
Click to expand...
Click to collapse
There's something wrong with DL: I've tried twice and failed for unkown reasons(this is first time it happens to me after hundreds of downloads)!
is this some like a skin? or it is really a windows phone 7 SO?
thanks!
hectorzin said:
is this some like a skin? or it is really a windows phone 7 SO?
thanks!
Click to expand...
Click to collapse
More like UI, not really WP7...
Correct me if I'm wrong...
bib*oops said:
There's something wrong with DL: I've tried twice and failed for unkown reasons(this is first time it happens to me after hundreds of downloads)!
Click to expand...
Click to collapse
Third time was lucky: DL successfull...
Let's make some tests...
it's bad
Hello! I tested it and here are my issues:
- the installation was a big trouble, I needed many hard resets to get somehow working it;
- the video driver crashed from the beginning;
- I wasn't able to do anything with my phone, so I had to install another OS.
tibi73 said:
- I wasn't able to do anything with my phone, so I had to install another OS.
Click to expand...
Click to collapse
+1
This is not a beta version...it's pre alpha.Good luck boyppc
tibi73 said:
Hello! I tested it and here are my issues:
- the installation was a big trouble, I needed many hard resets to get somehow working it;
- the video driver crashed from the beginning;
- I wasn't able to do anything with my phone, so I had to install another OS.
Click to expand...
Click to collapse
Totally agree & more(weird ROM with blurry&mixed colours graphics before first sleep):
-no settings in start?!
-Today screen has one window: internet calling off...;
-using File explorer, I can't select files by simple touch, touchscreen not responding;
-in phone tab I can't dial more than 2 digits, after that touchscreen not responding;
-sounds settings(ring type,ring tone,keypad) not active;
-and many others, a big waste of time to mention them...
Sorry, but this is a failure, for the moment, at least...
Maybe some other time, a possible nice ROM demanding (probably) a lot of future work...
Good luck !
Not recommended for rookies or unpatient users!!!
i have some error message in first install:
Error:
install \windows\opera_skin.cab failed, code=0x80004005
Error: htclog
tested it, graphic driver crashes from word go phone froze b4 complete setup complete dud but likin the idea will sure test if improvements are made
ROM TEST?
The graphics are terrible, the installation fails with the error - missing OperaSkin. CAB. Please solve installation errors, then you could call "ROM TEST. I do not think anything else should be said.
I flash this rom and install "Rescoexplorer" => run "system info"
the message show
"windows mobile 6.5 (wince 5.2)"
...
...
Any more details on this ROM? Progress, updates? Or is it discontinued?

[Q] Hi I can't flash the V20A to my LG P880, can someone help me please?

I've spent the best part of all morning trying to flash v20A, and I don't know what to do anymore.
I've tried both the method which uses LG official software, and an LG hack so that you can update using the official lg pc suite, and tried all morning, following all instructions to the letter, and it never worked. Then i tried the other, the regular method, using the update tools, and again I followed half a dozen very similar tutorials to the letter, each time trying the same thing, and it still never worked. The phone is fine, it is showing the S/W Upgrade, the drivers are installed, and yet, every time I get stuck here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This has been going on for more than an hour, and I've tried tons of times. WIndows 7 64-bit. DOn't know what I'm doing wrong can someone help me please?
For me one thing worked perfectly:
LG PC Suite has something like a recovery for our devices
built in (somewhere in Extras or Tools or smth. like that).
It downloads and installs the latest official V20A for your device.
Try it and report back
EDIT: If the tools always get stuck on unpacking kdz try reinstalling them (+drivers)
and download another V20A.kdz. Maybe there's something wrong with them.
Can you please give me the link to the best drivers ? And the best link for the kdz file, to make sure im getting the best there is and that they really work!
Hello again! I just tried again, I used the drivers from this link http://forum.xda-developers.com/showpost.php? p=38907170&postcount=1450
and for the kdz this: http://csmgdl.lgmobile.com/swdata/WDLSW/LGP880/ANEUBK/V20a_00/V20A_00.kdz
It's still not working! still stuck there !
Chrsp said:
Can you please give me the link to the best drivers ? And the best link for the kdz file, to make sure im getting the best there is and that they really work!
Hello again! I just tried again, I used the drivers from this link http://forum.xda-developers.com/showpost.php? p=38907170&postcount=1450
and for the kdz this: http://csmgdl.lgmobile.com/swdata/WDLSW/LGP880/ANEUBK/V20a_00/V20A_00.kdz
It's still not working! still stuck there !
Click to expand...
Click to collapse
Did you try to reinstall your LG Tools?
And you can find your latest (working) kdz + drivers here:
Rom Linker
Chrsp said:
I've spent the best part of all morning trying to flash v20A, and I don't know what to do anymore.
I've tried both the method which uses LG official software, and an LG hack so that you can update using the official lg pc suite, and tried all morning, following all instructions to the letter, and it never worked. Then i tried the other, the regular method, using the update tools, and again I followed half a dozen very similar tutorials to the letter, each time trying the same thing, and it still never worked. The phone is fine, it is showing the S/W Upgrade, the drivers are installed, and yet, every time I get stuck here:
This has been going on for more than an hour, and I've tried tons of times. WIndows 7 64-bit. DOn't know what I'm doing wrong can someone help me please?
Click to expand...
Click to collapse
Did you install "msxml"? Look like the tool can't unpack the kdz...
Search for updates in windows update, re-start your PC.
Drivers you can download from here:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Don't forget to turn ON "Windows Enabler".
Good luck

[Q] HTC ONE M7 Update

hello, i have a htc one EU and im tryin to install the official update released a week ago or something like that, never rooted, never custom rom, never water damaged, but the OTA update says everytime that is corrupt and has to be downloaded again, have done this many times, tried two differents wifi-connections, after all and not a single chance of success, i did a factory reset, everyone was gone ... and then a clean update, but again error update package is corrupted or something like that, everything deleted for nothing. someone with the same problem? and there is a way to flash this update manually instead of OTA? Thanks in advance
kocheko said:
hello, i have a htc one EU and im tryin to install the official update released a week ago or something like that, never rooted, never custom rom, never water damaged, but the OTA update says everytime that is corrupt and has to be downloaded again, have done this many times, tried two differents wifi-connections, after all and not a single chance of success, i did a factory reset, everyone was gone ... and then a clean update, but again error update package is corrupted or something like that, everything deleted for nothing. someone with the same problem? and there is a way to flash this update manually instead of OTA? Thanks in advance
Click to expand...
Click to collapse
strange
anyway, from which version to which version? you could download it from it (if available) from http://www.htc1guru.com/ and flash it manually
nkk71 said:
strange
anyway, from which version to which version? you could download it from it (if available) from *************** and flash it manually
Click to expand...
Click to collapse
thanks , im gonna try with the JB43 SENSE 55 ota update, hope it works
nkk71 said:
strange
anyway, from which version to which version? you could download it from it (if available) from***************** and flash it manually
Click to expand...
Click to collapse
Nope, nothing works and now restarting randomly...
kocheko said:
Nope, nothing works and now restarting randomly...
Click to expand...
Click to collapse
can you post a "fastboot getvar all" (remove IMEI and s/n) and a screenshot of bootloader
nkk71 said:
can you post a "fastboot getvar all" (remove IMEI and s/n) and a screenshot of bootloader
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks
i really appreciate the time u take to help me, i have myself not too much time for this and im very thankful, i wont try harder bcuz is working except for a random restart off and on, i repair cellphones daily but if same problem keeps coming on after factory reset on stock rom then im clueless
kocheko said:
i really appreciate the time u take to help me, i have myself not too much time for this and im very thankful, i wont try harder bcuz is working except for a random restart off and on, i repair cellphones daily but if same problem keeps coming on after factory reset on stock rom then im clueless
Click to expand...
Click to collapse
sorry no ideas, everything looks good from the shots you posted (hboot, firmware, radio), and you're on stock phone, so can't help much, sorry.
(also i didnt find any OTA.zip to flash manually)

[Q] Nexus 6 rooted won't take 5.1.1 update

I got the notification for the 5.1.1 upgrade, downloaded, reboots the phone, gets about half way, and the green android robot lays down and throws up a red exclamation point error.
Looked on the developers .google .com /android/nexus/images site, can't find a 5.1.1 image for my phone (AT&T / LMY47D)
Any way to fix this? Don't care about loosing any apps/data, I can install it all again.
Thanks for your suggestions.
In Lollipop any modifications to the system partition, such as rooting, will result in OTAs failing. I guess to prevent possible bricking.
AFAIK, You should be okay flashing the "5.1.1 (For Sprint, USC ONLY) (LMY47Z)", LMY47Z is the same build AT&T is rolling out OTA. If you're not experienced flashing images there are a couple tutorials on here.
n6android said:
I got the notification for the 5.1.1 upgrade, downloaded, reboots the phone, gets about half way, and the green android robot lays down and throws up a red exclamation point error.
Looked on the developers .google .com /android/nexus/images site, can't find a 5.1.1 image for my phone (AT&T / LMY47D)
Any way to fix this? Don't care about loosing any apps/data, I can install it all again.
Thanks for your suggestions.
Click to expand...
Click to collapse
Follow the advice above but i would first do `fastboot erase system` to erase root files before you start flashing to avoid problems.
All done
Got it working - thanks for your help!
Is it wrong or correctly?
I was buyed my nexus 6 before 2 weeks stock, (shamu, international LMY47Z, not rooted)and im not sure is it correctly this on software (firmware) update display?
Wunder is it, when i try check update on down windows, nothing happened like connected on update site or network connecting, etc, only - nothing happened.
Screenshot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks forwarding on answer.
Regards
miro666 said:
I was buyed my nexus 6 before 2 weeks stock, (shamu, international LMY47Z, not rooted)and im not sure is it correctly this on software (firmware) update display?
Wunder is it, when i try check update on down windows, nothing happened like connected on update site or network connecting, etc, only - nothing happened.
Screenshot :
View attachment 3381929
Thanks forwarding on answer.
Regards
Click to expand...
Click to collapse
English screenshot please ☺
Verstuurd vanaf mijn Nexus 6 met Tapatalk
gee2012 said:
English screenshot please
Verstuurd vanaf mijn Nexus 6 met Tapatalk
Click to expand...
Click to collapse
Satisfacted? Anyway you have Google translate...
miro666 said:
Satisfacted? Anyway you have Google translate...
Click to expand...
Click to collapse
I don`t make the rules but its a hassle to Google translate posts all the time from users from all over the world.`s. That`s why the used forum language here on XDA is English
miro666 said:
Satisfacted? Anyway you have Google translate...
Click to expand...
Click to collapse
N9 one is going to translate YOUR errors so they can help YOU.
If you want help, YOU must translate.
danarama said:
N9 one is going to translate YOUR errors so they can help YOU.
If you want help, YOU must translate.
Click to expand...
Click to collapse
Hear hear .....
Whats now is wrong? I was translated to english on last screeenshot (red worth on picture)...
Regards
Nobody help?
miro666 said:
Nobody help?
Click to expand...
Click to collapse
Just flash the latest factory image for the international unlocked devices wich is LMY47Z in fastboot, download link https://dl.google.com/dl/android/aosp/shamu-lmy47z-factory-33951732.tgz. Flash radio, bootloader (optional), system, boot and format and flash cache.img.

Moto G9 Play bricked by booting wrong twrp?

Hello forum, if someone could help me finding out, whether I bricked my device doing a pat step, or if it's still possible to recover it, I'd be most glad!
After unlocking the bootloader, it might be, I did a wrong step restarting too soon or something, or trying to boot into a wrong twrp-version. Actually I don't remember each step, as this happened a few months ago...
Thank you for now,
draftflash
if you still can, boot into fastboot and on your pc type
fastboot -w reboot.
if it doesn't work then consider using this firmware updater https://forum.xda-developers.com/t/rom-stock-rom-for-xt2083-reteu.4214883/
NoEscapeCh said:
if you still can, boot into fastboot and on your pc type
fastboot -w reboot.
...
Click to expand...
Click to collapse
worked! Wow! Life can be so easy Thank you!
But how come, I cannot boot into the proper twrp?
-> https://forum.xda-developers.com/t/...0-guamp-moto-g9-g9-play.4189901/post-83917303
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
draftflash said:
worked! Wow! Life can be so easy Thank you!
But how come, I cannot boot into the proper twrp?
-> https://forum.xda-developers.com/t/...0-guamp-moto-g9-g9-play.4189901/post-83917303
Click to expand...
Click to collapse
Try download stock rom then open find recovery.img and fastboot flash...woork for my bootloop
also twrp.img not work touch screen im bypass this by using PC mouse put USB rerciever in phone trough usb-c to USB from samsung box from mobile
draftflash said:
Hello forum, if someone could help me finding out, whether I bricked my device doing a pat step, or if it's still possible to recover it, I'd be most glad!
After unlocking the bootloader, it might be, I did a wrong step restarting too soon or something, or trying to boot into a wrong twrp-version. Actually I don't remember each step, as this happened a few months ago...
Thank you for now,
draftflash
Click to expand...
Click to collapse
Hi, were did you got that version of TWRP?
rogue.bot said:
Hi, were did you got that version of TWRP?
Click to expand...
Click to collapse
Hi rogue.bot, don't remember, maybe an instruction to install /e/ for Moto G7. Anyway, new state is that I recovered the STOCK and now 'd like to install the proper twrp, which should be available now, as I saw.
will the files on this thread be fine?
https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-4-0-0-guamp-moto-g9-g9-play.4189901/
draftflash said:
Hi rogue.bot, don't remember, maybe an instruction to install /e/ for Moto G7. Anyway, new state is that I recovered the STOCK and now 'd like to install the proper twrp, which should be available now, as I saw.
will the files on this thread be fine?
https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-4-0-0-guamp-moto-g9-g9-play.4189901/
Click to expand...
Click to collapse
Thanks, sorry for my late replay. I thought that /e/ was only for pixel phones, is it any better (in privacy) than LinageOS?
rogue.bot said:
Thanks, sorry for my late replay. I thought that /e/ was only for pixel phones, is it any better (in privacy) than LinageOS?
Click to expand...
Click to collapse
ouh, don't think so. I choose it for being said to be a bit lighter. But I am thinking of changing back to LineageOS for /e/ is a bit too close to conventional ROMs, regarding the user surface. But actually I don't know the newer versions of LineageOS.
draftflash said:
ouh, don't think so. I choose it for being said to be a bit lighter. But I am thinking of changing back to LineageOS for /e/ is a bit too close to conventional ROMs, regarding the user surface. But actually I don't know the newer versions of LineageOS.
Click to expand...
Click to collapse
I dont know if it is available, but for another phone I´ve tried dotOS and was pretty nice, at least on the surface, didn´t dig too deep inside the OS but it seems like a good option, also it has optimization in its DNA
is there a tutorial to root your device on here

Categories

Resources