MOTO G7 - Fastboot problem after installing rom - Moto G7 Plus Questions & Answers

Good morning friends! I have a problem that has become painful for me these past few days! I took my moto g7 xt1962-4 (river) and installed a PixelExperience recovery and a rom for this build.
Version: 10
File name: PixelExperience_river-10.0-20201123-1209-OFFICIAL.zip
MD5 hash: 4f9130df18136891e982baa925fc9bc6
Date: November 23, 2020 12:09 UTC
Downloads: 121
However after installing the recovery and finalizing the installation of the zip (ROM) my device restarted and remained on fastboot, I tried to use the minimal adb to repair the device, I tried to use rsd to repair the device, and I also used the tool lenovo repair, if anyone knows what is happening, thank you. Below I will leave the reading of getvar all.
(before installing the rom the bootloader was unlocked and now the oem_locked status)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 1056de9d
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
(bootloader) pcb-part-no:
all: listed above
finished. total time: 0.113s
C:\Program Files (x86)\Minimal ADB and Fastboot>

João Pedro Cordeiro said:
Good morning friends! I have a problem that has become painful for me these past few days! I took my moto g7 xt1962-4 (river) and installed a PixelExperience recovery and a rom for this build.
Version: 10
File name: PixelExperience_river-10.0-20201123-1209-OFFICIAL.zip
MD5 hash: 4f9130df18136891e982baa925fc9bc6
Date: November 23, 2020 12:09 UTC
Downloads: 121
However after installing the recovery and finalizing the installation of the zip (ROM) my device restarted and remained on fastboot, I tried to use the minimal adb to repair the device, I tried to use rsd to repair the device, and I also used the tool lenovo repair, if anyone knows what is happening, thank you. Below I will leave the reading of getvar all.
(before installing the rom the bootloader was unlocked and now the oem_locked status)
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) product: river
(bootloader) board: river
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB MICRON S0J9N8 RV=08 PV=10 FV=0000000000000004
(bootloader) ram: 4GB MICRON LP3 DIE=8Gb M5=FF M6=01 M7=00 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 1056de9d
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-river_retail-f238a87f119-201124
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
(bootloader) pcb-part-no:
all: listed above
finished. total time: 0.113s
C:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
When the bootloader changes from unlocked to lock by itself or after flashing a rom, only fix I've seen is.
Booting to EDL Mode
Try
Code:
fastboot oem blankflash
If you can boot a custom recovery like TWRP
see reboot options for EDL
or use
Code:
adb reboot edl
With twrp booted.
If device is in Emergency Download Mode (EDL Mode)
Screen will be black and will be shown as Qualcomm device on PC

i also faced this problem when i flash the lineageos, this is a low version bootloader and cannot turn to edl mode, i use TinyFastbootScript fix this issue.
get a stock rom and flash the BP/BL.
net time you'd better install the copy-partitions-20200903_1329.zip before flash a new custom rom.

I managed to get him to go to edl and use blankflash but still no ah how to install twrp or firware

I bought another plate for the device, I thank everyone on the forum for their attention, you are excellent people, and now we have a story about a brick

sd_shadow said:
When the bootloader changes from unlocked to lock by itself or after flashing a rom, only fix I've seen is.
Booting to EDL Mode
Try
Code:
fastboot oem blankflash
If you can boot a custom recovery like TWRP
see reboot options for EDL
or use
Code:
adb reboot edl
With twrp booted.
If device is in Emergency Download Mode (EDL Mode)
Screen will be black and will be shown as Qualcomm device on PC
Click to expand...
Click to collapse
everything worked fine on EDL but it still doesn't work, I can put it in qualcomm mode but I didn't succeed

João Pedro Cordeiro said:
everything worked fine on EDL but it still doesn't work, I can put it in qualcomm mode but I didn't succeed
Click to expand...
Click to collapse
you mean the phone can worked on EDL mode but you cannot use blankflash function?
blankflash - mirrors.lolinet.com > firmware > motorola > lake > blankflash
make sure the edl driver has been installed and check the 9008 mode shown in the device manager.
after the blankflash the phone can be set to bootloader mode, then you can do other trying.

Related

Moto E5 plus bricked - fastboot only - all stock

Hi all.
My phone bricked out of the blue, all stock, locked fastboot, no upgrades installed for quite some time, only Play Store apps installed.
It can't get past fastboot. When I try to Start Android, it shows "Failed to validate boot image. ERROR: failed to pass validation, backup to fastboot".
Same messages when I try to enter Recovery Mode.
Tried installing TWRP, but I can't get the fastboot unlock code, shows error message below:
C:\Program Files\Android\Android Studio>fastboot oem get_unlock_data
...
(bootloader) Unlock data:
(bootloader) read datablock error
(bootloader) Failed
OKAY [ 0.004s]
finished. total time: 0.004s
Baseband field is blank, and IMEI is 0.
Product/Variant is showing: hannah 000000000000000 16GB P3
ATM I have no need for custom roms, unlocks or anything like that, but if it's the way to go, I would go for it.
Any ideias on how to approach this?
Below I send all vars, if it helps somehow:
C:\Program Files\Android\Android Studio>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F(*)
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: d0f001b8
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 1ECC453900000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 535822336
(bootloader) reason: Last time flashing failed
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.055s
What variant do u have
Pbsipher1 said:
What variant do u have
Click to expand...
Click to collapse
Thanks for your reply, and I apologize if I don't answer this correctly, I'm not very knowledgeable in these things...
I'm from Brazil, and bought it here, so doing some research, I found this:
OPP27.91-146 Brazil / XT1944-4
I don't know if there's any way to check it within fastboot as well... a lot of vars are blank at this moment...
The only other thing that looks like a variant here is: hannah
Lenovo Moto Smart Assistant
Try using the "Lenovo Moto Smart Assistant". After installing, connect your phone to your computer, open the program, click flash - rescue - and follow the instructions.
Ex novo said:
Try using the "Lenovo Moto Smart Assistant". After installing, connect your phone to your computer, open the program, click flash - rescue - and follow the instructions.
Click to expand...
Click to collapse
Just tried that, but no dice. Tried all variations of Moto E5, never got recognized.
"Failed to match the connected device. Please plug it out, and try again".
Tried plugging it out/in several times, but no luck.
Thank you for the suggestion, though.
Have the same problem. Could you fix it? Thx
Only hope is blankflash or possibly flashing newer stock firmware, its on telegram group
I seem to have the same issue.
Did you manage to find a way to fix this?

Motorola One Lite (X 1941-4) fastboot brick

Start Up Failed:
Your device didn't start up successfully.
...
Blocked into fastboot - Bootloader logs after wrong firmware adb flashing.
Flashed the android 10 update via lenovo moto smart assistant, it worked, after that it wouldn't recognise my phone, had the boot message "Your device has failed verification and may not work properly" and I tried to get rid of it plus that android 10 looked laggy in comparison with android 9, so i tried to flash the lastest android 9 rom so I bricked my phone. Tried to flash the android 10 rom available here and every rom I found for my phone. My bootloader is locked, i cannot unlock it bc i forgot to unlock oem and I'm stuck with the bricked phone. Tried to flash via RSD Lite, didn't recognise, flashed via adb, via Moto Flash Tool, tried everything. I know it could be blankflashed via EDL Mode, but I cannot get it in EDL mode, i don't have an EDL cable, i can't pin or i don't know how to short-circuit the pinpoint and don't have the tools to disassemble the phone. Please help me, I bought this phone like a week ago and I bricked it in the third day. Thank you very much!
Info form fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-deen_retail-c30fda1-200130
(bootloader) product: deen
(bootloader) board: deen
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 7
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GD6BMB RV=08 PV=01 FV=0000000000000001
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY326936FS
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 01EF607800000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 534773760
(bootloader) reason: Fall-through from normal boot mode
(bootloader) imei: 359548095218017
(bootloader) meid:
(bootloader) date: 06-18-2019
(bootloader) sku: XT1941-4
(bootloader) carrier_sku: XT1941-4
(bootloader) battid: SB18C30734
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Mar 31 11:14:27 UTC 2020"
(bootloader) ro.build.fingerprint[0]: motorola/deen/deen_sprout:10/QPK30
(bootloader) ro.build.fingerprint[1]: .54-22/6add:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.6.r1-02600-89xx.0
(bootloader) version-baseband: M8953_37.155.02.28R DEEN_APACDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.124-perf-gb0c3168-dir
(bootloader) kernel.version[1]: ty ([email protected]) (gcc version 4
(bootloader) kernel.version[2]: .9.x 20150123 (prerelease) (GCC) ) #1 SM
(bootloader) kernel.version[3]: P PREEMPT Thu Jan 30 10:24:24 CST 2020
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-deen_retail-c30fda1-200130
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: reteu
(bootloader) current-slot:
(bootloader) running-boot-lun: 0
(bootloader) running-slot:
(bootloader) slot-suffixes: _a,_b
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: No
(bootloader) slot-successful:_b: No
(bootloader) slot-bootable:_a: No
(bootloader) slot-bootable:_b: No
(bootloader) slot-retry-count:_a: 0
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.180s
Thank you!

Moto G6 Play Recovery

Hi,
I was hoping someone may be able to point me in the right direction with an issue with a Moto G6 play that seems to be stuck with what I'm guessing is a corrupted firmware. The phone is my partners and was totally standard, she asked me to take a look yesterday as it seemed to be locked on the charging screen. I managed to get it to power off but it seems to have gone into the boot loader where I have various warnings about being unable to validate the image (Boot or recovery).
The only options I seem to have are:-
Bootloader logs
switch tools mode
start
restart bootloader
recovery mode
power off
factory
barcodes
bp tools
Qcom
but pressing the power button on each of these seems to cycle to the next one rather than take me to a sub menu.
I did manage to get to the android droid with the open hatch once, but can't seem to get back to that.
I'm not entirely sure what version the phone is and when I run the getvar option with fastboot it looks like a lot of the fields are blank (Not sure if this is normal):-
C:\Users\sgpow\AppData\Local\Android\Sdk\platform-tools>fastboot.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader[0]: MBM-2.1-aljeter_retail-b1f322d35c1-2
(bootloader) version-bootloader[1]: 00404
(bootloader) product: jeter
(bootloader) board: jeter
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 6
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG GD6BMB RV=08 PV=01 FV=0000000000000001
(bootloader) ram: 3GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: MSM8937
(bootloader) serialno: 8a7cd3d2
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 159A3D7400000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-aljeter_retail-b1f322d35c1-200404
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.314s
I have tried to follow a few guides to reflash back to stock, but have had no success so far. Suspect that may be down to not being able to identify the correct stock roms.
Any thoughts or help greatly appreciated.
Regards
Frank

moto g9 plus odessa hardbricked totally no edl no fastboot

Hi good day, i flashed pixelExperience UNOFFICIAL ROM last week but i found a bug that wifi kept disconnecting so I wanted to return back to stock so I did the process to go back to stock, and everything was fine until i decided to relock the bootloader, the phone got stuck at a screen that said "Operating system not valid this device wont boot" <--- it was something like that, i dont remember so I inmediately went to fastboot mode and try to reflash the rom but everything I tried to do didn't work because it kept asking me that my bootloader needed to be unlock by going to system usb debugging etc, but how would I do that if the phone was already stuck at fastboot, then i thought I don't know twhy I got the stupid idea that running "fastboot erase all" command would help me, so yes I ran that command and guess what the phone got much worse than it already was
now i can't do anything I've searched on a lot of forums and nothing seems to work I heard that using a blankflash would help me the thing is no matter the command i run it will always sends me back to fastboot mode I tried moto rescue and didn't work as well I've heard that EDL mode but phone keeps going to fastboot or maybe I'm doing something wrong, please help me!!!!
this is what fastboot getvar all shows
fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-odessa_retail-e69c40c38d-220105
(bootloader) product: odessa
(bootloader) board: odessa
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: BRLAP
(bootloader) storage-type: UFS
(bootloader) emmc: N/A
(bootloader) ufs: 128GB MICRON MT128GASAO4U21 FV=0106 WB=0
(bootloader) ram: 4GB MICRON LP4 DIE=32Gb M5-M8=FF 06 00 18
(bootloader) cpu: SM7150 1.0
(bootloader) serialno: ZY22CRQG7F
(bootloader) cid: 0x0032
(bootloader) channelid: 0x03
(bootloader) uid: D2DE5AB3
(bootloader) token: inactive
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 805306368
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 355537115810642
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 06-29-2021
(bootloader) sku: XT2087-1
(bootloader) carrier_sku: XT2087-1
(bootloader) battid: SB18C98040
(bootloader) battery-voltage: 3914
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: amxmx
(bootloader) ro.build.fingerprint[0]: motorola/odessa_retail/odessa:11/R
(bootloader) ro.build.fingerprint[1]: PAS31.Q2-59-17-4-3-2/37446:user/re
(bootloader) ro.build.fingerprint[2]: lease-keys
(bootloader) ro.build.version.qcom: LA.UM.9.1.r1-09100-SMxxx0.0
(bootloader) version-baseband: M7150_22.31.04.72R ODESSA_BRLAP_CUST
(bootloader) kernel.version[0]: Linux version 4.14.190-perf+ ([email protected]
(bootloader) kernel.version[1]: roid-build) (clang version 10.0.7 for An
(bootloader) kernel.version[2]: droid NDK, GNU ld (binutils-2.27-bd24d23
(bootloader) kernel.version[3]: f) 2.27.0.20170315) #1 SMP PREEMPT Wed J
(bootloader) kernel.version[4]: an 5 04:57:51 CST 2022
(bootloader) git:xbl: MBM-3.0-odessa_retail-ce4c20166-220105
(bootloader) git:xbl_config: MBM-3.0-odessa_retail-ce4c20166-220105
(bootloader) git:aop: MBM-3.0-odessa_retail-9817cf3-220105
(bootloader) git:tz: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) git:hyp: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) git:devcfg: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) git:cmnlib: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) git:keymaster: MBM-3.0-odessa_retail-db27bc4-220105
(bootloader) git:storsec: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) gitrov: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) git:abl: MBM-3.0-odessa_retail-e69c40c38d-220105
(bootloader) git:uefisecapp: MBM-3.0-odessa_retail-c8525e1a1-220105
(bootloader) frp-state: no protection (0)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 2
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x1000
(bootloader) erase-block-size: 0x1000
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28D02302
(bootloader) primary-display: txd_ft8756_fhd_vid
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.041s
please help is there really no way to fix this phone?
[IMG alt="sd_shadow"]https://forum.xda-developers.com/data/avatars/s/4267/4267571.jpg?1641263152[/IMG]
have you tried to flash stock rom ? and if so whats the response ?

Motorola Moto G5S Plus (XT1802) that does not boot, calls now on the Bootloader screen (failed to validate boot image)

Hello guys
First I apologize for my bad English
I'm new in the business, I came across the first big problem with a Motorola Moto G5S Plus (XT1802) that doesn't boot, it turns on the Bootloader logs screen, and presents the following messages:
AP Fastboot Flash Mode (Secure)
Fastboot Reason: Volume down key pressed
failed to validate boot image
ERROR: Failed to pass validation, backup to fastboot
The device worked perfectly, it started to crash, with difficulties to restart, then it crashed in the bootloader. I put root a while ago, and I was with android 8.1.0. I've tried everything.
Here is my output of the command "fastboot getvar all":
C:\Users\PRISTON TALE\Desktop\Comandos ADB Romtekcell>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C2.12(*)
(bootloader) product: sanders
(bootloader) board: sanders
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B
(bootloader) cpu: MSM8953
(bootloader) serialno: 2006e0b2
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: FBC7888C00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 534773760
(bootloader) reason: Fall-through from charger boot mode
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: git=MBM-NG-VC2.12-0-g07ff23c
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.141s
As you can see in the command output and in the attached photos, what worries me the most is that both the IMEI and the model are zeroed, neither the IMEI number nor the XT1802 appears. On the Barcodes screen, everything is also reset, with the exception of the serial, which appears perfectly.
Same situation for me, no solution available after 2 years.

Categories

Resources