Related
Hi, I am on Open beta 28 on my OnePluse 3T. I have tried multiple times to sideload official builds 4.5.14 and 4.5.0. But all of the time it fails at 47% and shows ''Total xfer : 1.00x''. I wanted to go back to stable version of os.Tried local upgrade with 4.5.1 and 4.5.0 too, every thing fails. Googled and searched for solution but haven't found any.Please help guys.TIA.
rahatx7 said:
Hi, I am on Open beta 28 on my OnePluse 3T. I have tried multiple times to sideload official builds 4.5.14 and 4.5.0. But all of the time it fails at 47% and shows ''Total xfer : 1.00x''. I wanted to go back to stable version of os.Tried local upgrade with 4.5.1 and 4.5.0 too, every thing fails. Googled and searched for solution but haven't found any.Please help guys.TIA.
Click to expand...
Click to collapse
Did you mean Open Beta 18? (This is the current Beta Oreo build for OP3T)
You can get back on Stable channel in two ways. Download the .zip for Oreo 5.0 and use 'Local Upgrade' option to update. (See OP here: https://forum.xda-developers.com/oneplus-3t/how-to/oxygenos-5-0-released-op3-3t-t3707149)
I find Oreo to be buggy right now so i followed this guide and downgraded back to Nougat: https://forums.oneplus.net/threads/guide-how-to-go-from-oreo-beta-25-16-to-stock-nougat.661713/
You have to use the special builds in that guide, which is why you have been running into problems.
Hello,
I have install magisk on my mi a2 and now it cant install any ota updates.
There is a lot of time and i cant remember correctly what partition i used, so there is any safe method to restore my phone in unrooted mode and install updates?
It runs 8.1 with September 5 security updates.
Hi
I have the exactly same problem, but with the 5 November update, and it download the update and give me the error Installation problem, no root, and no camera2 api enable
Exciting to see android 11 come to our OP7 series!
Can someone who doesn't mind being a guinea pig test the update out? I am currently on a third party ROM (i do prefer OEM) however i had to go that route since my usb to audio splitter didn't work after 10.X.X.X update here since November. Was wondering if someone who doesn't mind could update to this latest, and test it out. https://www.xda-developers.com/oneplus-7-7-pro-7t-7t-pro-stable-oxygenos-11-android-11/
Regards,
Travis
i would love to do it but no file for the 7 pro yet
There aren't files for 7 series, only for 7T and 7T Pro.
I've read something about problems with Camera app, so they turned off distributing update. Still waiting
Global version is on Oxygen Updater now.
Nothing for EU yet.
Official Global Link : https://otafsg1.h2os.com/patch/amaz...1.P.35_OTA_0350_all_2103221240_0ebe9c8a78.zip
Android File Host Mirror : https://www.androidfilehost.com/?fid=2188818919693770547 (MD5 : 3ec7940e9e50032b540ceaf2a3364f85 )
Pack with rooted boot image and instructions for Global : https://www.androidfilehost.com/?fid=2188818919693770594 ( MD5 : b24c7463ef9a78ab0ae7ae708dc46c37 )
I've extracted all the image files but AFH is still being a pile of crap, FTP uploads won't work and web uploads keep stopping or not completing, uploaded mirror to Dropbox for now, will try to get it uploaded to AFH asap.
Pack with all extracted images for Global version : (TEMP Dropbox Link) https://www.dropbox.com/s/nwfo6433wdkkkk3/Default-OxygenOS11-Final-Images_Global.zip?dl=0
Is it true AOD is missing??
I will keep Beta 4 if this is true
vegetaleb said:
Is it true AOD is missing??
I will keep Beta 4 if this is true
Click to expand...
Click to collapse
AOD was in the labs, labs is not included in the stable release ring (probably never will be) as it's supposed to be test software.
djsubterrain said:
AOD was in the labs, labs is not included in the stable release ring (probably never will be) as it's supposed to be test software.
Click to expand...
Click to collapse
Can someone try this trick to enable AOD on stable OOS 11?
[ROOT/Magisk] Enable Always on Ambient Display on Oxygen OS 11 Beta 1
Contrary to what OnePlus have said, the code for the Always on Ambient Display is in the first beta of Oxygen OS 11. All you have to do is enable the feature, which is disabled in the "OPFeatures" framework. This is very simple, and can be done...
forum.xda-developers.com
Installed and working stable for me. No problems observed with camera, messaging etc. AOD is irrelevant to me - won't miss it. Battery seems to be stable too - no indication of excessive power usage. Will update if I see anything. BTW, I am stock non-rooted.
Can we return nanroid if 11 is buggy ?
zelenko said:
Can we return nanroid if 11 is buggy ?
Click to expand...
Click to collapse
There will possibly be a rollback link provided if OnePlus ever make an actual thread for the release, there isn't one at the moment.
OK, I'm mistaken, there is actually a thread now :
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
No rollback link though so you'd likely need to do a full flash which would probably wipe the phone.
Has anyone rooted yet? And if so, which version of majisk did you use?
Hi, I tried rooting with the patched boot.img linked above but it fails to boot twice then enters recovery. Also tried patching the img myself using the latest magisk 22.0 app but it gave the same behavior. I use the command: fastboot flash boot magisk_patched.img to flash.
Anyone know what's up ?
EDIT: after the failed boot I have a "BOOT REASON" menu in recovery giving this message:
Code:
--------------------------------
Boot Reason : RescueParty
--------------------------------
Unable to parse kernel log. For more debug information,
adb pull /mnt/vendor/op2/rbr_log
or pull op2.img
Trying the adb command in recovery tells me it's unauthorized and I had to give access from the phone (which isn't possible it seems). Doing the adb pull with the system booted gives:
Code:
adb: error: failed to stat remote object '/mnt/vendor/op2/rbr_log': Permission denied
EDIT 2: After a backup and clean wiping the userdata magisk seems to work now.
From OxygenOS 11 Open Beta 4
to OxygenOS 11
without losing your data.
1.) Download and install OxygenOS 11
2.) Download keep_data.apk
You need to install it after the update was installed but before you restart.
After the apk is installed, run the application, click "KEEP DATA".
You should now be able to restart the phone without losing your data
P.S.
All your applications
and data remain intact
vegetaleb said:
Can someone try this trick to enable AOD on stable OOS 11?
[ROOT/Magisk] Enable Always on Ambient Display on Oxygen OS 11 Beta 1
Contrary to what OnePlus have said, the code for the Always on Ambient Display is in the first beta of Oxygen OS 11. All you have to do is enable the feature, which is disabled in the "OPFeatures" framework. This is very simple, and can be done...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes, that does put the option back into the display settings, but just like before it gets lost in reboot unless you add that sh file
btvolta said:
Has anyone rooted yet? And if so, which version of majisk did you use?
Click to expand...
Click to collapse
Coming from ob4, I reflashed magisk to the inactive slot in the app after the upgrade was complete but before I rebooted the phone. After the reboot, I tapped on the magisk app and it said it needed additional files. After it downloaded and installed the additional files the phone rebooted and my root works fine. I started with magisk 22.
I am on 10.3.7 rooted with magisk. Before starting, a few questions. Is it possible to upgrade to 11 without losing data and retaining root? If not, is there a magisk for 11. What is the safest way to upgrade? Also, is there twrp for 11? Any help would be greatly appreciated.
Fresh install from factory reset. Screen still wigs out on FHD. Unlocking causes everything to be gigantic and have to hard reset. So no change for me from beta 4 to stable 11.
djsubterrain said:
Global version is on Oxygen Updater now.
Nothing for EU yet.
Official Global Link : https://otafsg1.h2os.com/patch/amaz...1.P.35_OTA_0350_all_2103221240_0ebe9c8a78.zip
Android File Host Mirror : https://www.androidfilehost.com/?fid=2188818919693770547 (MD5 : 3ec7940e9e50032b540ceaf2a3364f85 )
Pack with rooted boot image and instructions for Global : https://www.androidfilehost.com/?fid=2188818919693770594 ( MD5 : b24c7463ef9a78ab0ae7ae708dc46c37 )
I've extracted all the image files but AFH is still being a pile of crap, FTP uploads won't work and web uploads keep stopping or not completing, uploaded mirror to Dropbox for now, will try to get it uploaded to AFH asap.
Pack with all extracted images for Global version : (TEMP Dropbox Link) https://www.dropbox.com/s/nwfo6433wdkkkk3/Default-OxygenOS11-Final-Images_Global.zip?dl=0
Click to expand...
Click to collapse
I read the instructions in the zip file. My question is do we install the magisk and boot image before or after we install the update?
So I'm stuck in a boot loop after taking the OTA.
There is a Eu version of Android 11, I woke up with notification )
Please read all indications before proceeding.
Proceed always at your own risk!!!
I did the test to perform the transition from OpenBeta firmware to stable release, using the keep_data file without deleting data, and keeping the root already present on the phone.
The steps are simple, first of all you need to:
Download the complete firmware file
Download the keep_data apk file
save them in the phone's memory, after which you proceed with the local update (ignore the data deletion warning) and once the installation is completed you DO NOT NEED TO RESTART THE PHONE (if you restart now all data will be erased).
Now we install the keep_data.apk and run it, confirming that we do not want to delete the data, even now we DO NOT RESTART but we open magisk, select the "install" button next to the magisk version already present and select "install in the inactive slot (after OTA)", proceed with the installation and when completed, we can finally reboot.
We will have our Oneplus with OxygenOS 11 Stable firmware, root and magisk installed and all our data present.
I tested everything on Oneplus 7 going from OpenBeta4 to OxygenOS 11.0.1.1, I still recommend making a backup of all your data before proceeding, safety first of all.
TESTED ONLY WITH OXYGENOS 11 FIRMWARE.
The keep_data application, has been released for use with OxygenOS 11, I have no way of knowing if it is also possible to use it with OxygenOS 10.
I was a tester and everything went smoothly, no problems or abnormal behavior but
it is important to remember that proceed always at your own risk!!!
full wipe is always recommended in the transition from beta to stable and vice versa.
Good luck!
Original reference source for the keep_data.apk file, present on the oneplus forum here.
UPDATE: the guide is valid and working even using the rollback package firmware necessary to switch from OpenBeta 5 to OxygenOS 11.0.1.1
Proceed always at your own risk!!!
If I wanna try this, it means that I have to install the rollback build from here and then install the keep_data.apk, right?
kamalikhwan3 said:
If I wanna try this, it means that I have to install the rollback build from here and then install the keep_data.apk, right?
Click to expand...
Click to collapse
I didn't use the rollback package, I used the standard 11.0.1.1 firmware.
I believe that, with rollback package, wipe is done before firmware installation so keep_data apk would be useless.
However, using the standard firmware file I have not encountered any problems.
UPDATE: keep_data apk work also with rollback package firmware.
dianoandr said:
I didn't use the rollback package, I used the standard 11.0.1.1 firmware.
I believe that, with rollback package, wipe is done before firmware installation so keep_data apk would be useless.
However, using the standard firmware file I have not encountered any problems.
Click to expand...
Click to collapse
Alright. I already downloaded the full 11.0.1.1 firmware but now a new problem arise in which it doesn't allow me to downgrade as per the attached image. My device is OnePlus 7 Pro and currently on Open Beta 5. Is there any workaround for this?
kamalikhwan3 said:
Alright. I already downloaded the full 11.0.1.1 firmware but now a new problem arise in which it doesn't allow me to downgrade as per the attached image. My device is OnePlus 7 Pro and currently on Open Beta 5. Is there any workaround for this?
Click to expand...
Click to collapse
Unfortunately this is normal, OpenBeta 5 is newer than stable 11.0.1.1.
In this situation, the options are full wipe with the rollback firmware package, another option is to wait for a new stable firmware release, that will be newer than openbeta 5, another option is to check if the procedure I wrote also works with the firmware rollback but I have no information about it.
kamalikhwan3 said:
Alright. I already downloaded the full 11.0.1.1 firmware but now a new problem arise in which it doesn't allow me to downgrade as per the attached image. My device is OnePlus 7 Pro and currently on Open Beta 5. Is there any workaround for this?
Click to expand...
Click to collapse
Update from the Oneplus forum:
the guide is valid and working even using the rollback firmware necessary to switch from OpenBeta 5 to OxygenOS 11.0.1.1
Tried this just now and it works flawlessly! Thanks bud!!!! Now to wait until the pixel 6 comes out and switch to that
FYI for those who want, the new stable update V11.0.2.1 can be updated over Beta 5 without having to use the rollback update and using the keep_data apk works to avoid wiping data when flashing.
Hello is that working for Update from 11.0.0.2 to 11.0.2.1 without losing root ?
prad1po said:
Hello is that working for Update from 11.0.0.2 to 11.0.2.1 without losing root ?
Click to expand...
Click to collapse
No, this guide Is only for switch from beta firmware to stable without data wipe.
For update firmware without losing root, follow this step (before to start make a BACKUP, BACKUP, BACKUP,
BACKUP, BACKUP ):
Remove all installed magisk module and reboot phone.
Download full firmware 11.0.2.1 and save in phone storage memory.
Install new firmware but DO NOT REBOOT WHEN INSTALLATION IS COMPLETE.
Open Magisk and select "install" in magisk section.
Select "Install to inactive slot (After OTA update)".
When magisk installation end, reboot your phone.
Restore your magisk module.
Finish...latest firmware release installed and rooted .
Regards.
Thank you
My phone is rooted with a modified boot.img
It will work also ?
prad1po said:
Thank you
My phone is rooted with a modified boot.img
It will work also ?
Click to expand...
Click to collapse
Yes, work only with pre-rooted phone, to retain root after a firmware update
thanks for your help
it's worked perfectly
Just used this to rollback from Open Beta 5 to stable, thank you!!
Will it work with a prerooted phone?
I mean I am just on beta build (didn't root). Can I install the stable firmware and use the app to retain the data? Or is root a pre-requisite?
Shubham87 said:
Will it work with a prerooted phone?
I mean I am just on beta build (didn't root). Can I install the stable firmware and use the app to retain the data? Or is root a pre-requisite?
Click to expand...
Click to collapse
Root privileges is not required to perform the firmware change while retaining user data, just ignore the magisk installation step and reboot phone after running the keep_data application
dianoandr said:
Root privileges is not required to perform the firmware change while retaining user data, just ignore the magisk installation step and reboot phone after running the keep_data application
Click to expand...
Click to collapse
Thank you.
I have a new problem now. Local upgrade is not allowing me to install the 11.0.0.2.GM21AA firmware. I am currently running O2_Beta_5.
Local upgrade says "Version of selected package is lower than that of current system, hence downgrading not allowed".
Please help.
Shubham87 said:
Thank you.
I have a new problem now. Local upgrade is not allowing me to install the 11.0.0.2.GM21AA firmware. I am currently running O2_Beta_5.
Local upgrade says "Version of selected package is lower than that of current system, hence downgrading not allowed".
Please help.
Click to expand...
Click to collapse
You cannot update with "Local upgrade" feature, if the new firmware is older than the firmware installed on the phone.
If you currently have Openbeta 5 firmware, you can install the stable 11.0.2.1 or the latest 11.0.3.1.
The downgrade is still possible but requires a specific firmware package and the complete data wipe.
Thread closed on request of OP @dianoandr as the OP doesn't possess the device any longer!
Hi all!,
I have now MIUI Global 13.0.10.0 and a few days ago I got an update 13.0.15.0 SKDEUXM. My question is - can I follow the procedure from MIUI 12 to do it in the same way:
Procedure for OTA update with magisk: (Thanks to @Toug )
- Allow MIUI to download the last update
- Allow installation
- Don't allow to reboot just after the update
- Open magisk
- select install Magisk (the first one)
- select the third option
- Select go (maybe wrong translation from french)
- Wait until this image appear (the first line may indicate _b instead of _a)
- Select reboot
Click to expand...
Click to collapse
What I know, it shouldn't be used during update from MIUI 12 to MIUI 13 but later?
Is here anyone who tried it?
Thanks in advance!
Haven't tried that way, I installed OTA , then flashed twrp again and magisk, everything done in 2mins, 10mins with update.
i did it this way with magisk ota , ça fonctionne nickel chrome , it's work fine
I flashed 15 and have no issues.
Hi, another question: Has anyone tried rooting 13.0.15? Is it the same procedure used for other 13.0.X versions?
I have udpate just yesterday done. I have uninstalled magisk by restore image, then update WITHOUT REBOOT, then install in inactive slot and finally reboot. Just like in MIUI 12.
Further no issues!
krzywojc said:
Hi all!,
I have now MIUI Global 13.0.10.0 and a few days ago I got an update 13.0.15.0 SKDEUXM. My question is - can I follow the procedure from MIUI 12 to do it in the same way:
What I know, it shouldn't be used during update from MIUI 12 to MIUI 13 but later?
Is here anyone who tried it?
Thanks in advance!
Click to expand...
Click to collapse
Thank's man for this tuto ! Perfect !