Related
I bought a second hand galaxy note 5, on the back cover of the phone the model is written SM-N920C but in download mode is written SM-N920d ! Nevertheless when I check the model at "setting/about the device" the model was SM-N920I
The problem started when my note 5 was flashed with venom rom then I accidentally formated all system files so the phone stuck in Android logo, I tried to flash the phone using Odin and SM-N920c but Odin said FAILED just when I click start. Now the phone is off for the battery is dead and it couldn't be charged , please help me to find the right flash and is there any way to flash it without download mood?
Use Kies and do an emergency recovery. It'll also be able to determine the actual model number. You probably didn't update the bootloader when usong Venom or something. Usually you want to update to the official marahmallow and then flash after that.
Turbine1991 said:
Use Kies and do an emergency recovery. It'll also be able to determine the actual model number. You probably didn't update the bootloader when usong Venom or something. Usually you want to update to the official marahmallow and then flash after that.
Click to expand...
Click to collapse
Thanks for your comment, I did that already but kies does not support emergency recovery for Note 5 SM-N920c!
I've used it once on my 920c when I initially messed something up. You may need to invoke download mode. Turn the phone off and hold home, volume down and power.
Oh, and there's a modern version of kies which works for modern Samsung phones only.
Did you install a custom recovery immediately after rooting? Always do this first.
Mohannad 14 said:
I bought a second hand galaxy note 5, on the back cover of the phone the model is written SM-N920C but in download mode is written SM-N920d ! Nevertheless when I check the model at "setting/about the device" the model was SM-N920I
The problem started when my note 5 was flashed with venom rom then I accidentally formated all system files so the phone stuck in Android logo, I tried to flash the phone using Odin and SM-N920c but Odin said FAILED just when I click start. Now the phone is off for the battery is dead and it couldn't be charged , please help me to find the right flash and is there any way to flash it without download mood?
Click to expand...
Click to collapse
N920d or N9200?
In your case, I would go with what is mentioned in the download mode since the back glass can be replaced with another model and ROM flashing can alter model # sometimes.
PS: you need to be sure that it was an original Note 5, not just a copy. I'd recommend taking it to the nearest service center to have it checked out.
Turbine1991 said:
I've used it once on my 920c when I initially messed something up. You may need to invoke download mode. Turn the phone off and hold home, volume down and power.
Oh, and there's a modern version of kies which works for modern Samsung phones only.
Did you install a custom recovery immediately after rooting? Always do this first.
Click to expand...
Click to collapse
How to do a custom recovery? Thanks for your help my friend.
RazorMC said:
N920d or N9200?
In your case, I would go with what is mentioned in the download mode since the back glass can be replaced with another model and ROM flashing can alter model # sometimes.
PS: you need to be sure that it was an original Note 5, not just a copy. I'd recommend taking it to the nearest service center to have it checked out.
Click to expand...
Click to collapse
I went with what is mentioned in the download mode which is N920d but I didn't find this firmware at any site?
Mohannad 14 said:
I went with what is mentioned in the download mode which is N920d but I didn't find this firmware at any site?
Click to expand...
Click to collapse
Because that firmware does not exist.
It's either 920C or 920CD (for dual-sim) or 9200 for Chinese models.
The first two will have similar firmwares but the 9200 uses different one.
Have you verified exactly which model it is? What does Kies mention when you connect?
RazorMC said:
Because that firmware does not exist.
It's either 920C or 920CD (for dual-sim) or 9200 for Chinese models.
The first two will have similar firmwares but the 9200 uses different one.
Have you verified exactly which model it is? What does Kies mention when you connect?
Click to expand...
Click to collapse
Thanks for your help, Yes, it is SM-N920D and it really confusing! do you think that this phone is fake?
Mohannad 14 said:
Thanks for your help, Yes, it is SM-N920D and it really confusing! do you think that this phone is fake?
Click to expand...
Click to collapse
As per my search on google, the n920D is Docomo variant.
I haven't been able to find the stock firmware anywhere as of yet.
Flash a custom recovery for your variant (TWRP>others) and then flash a custome ROM that is compatible with 920D.
There must be some on XDA itself.
RazorMC said:
As per my search on google, the n920D is Docomo variant.
I haven't been able to find the stock firmware anywhere as of yet.
Flash a custom recovery for your variant (TWRP>others) and then flash a custome ROM that is compatible with 920D.
There must be some on XDA itself.
Click to expand...
Click to collapse
Thanks a lot. I appreciate your great efforts my friend. The problem still the same, no stock firmware for N920D
Hy i tried to root my sm-m205fn and i ended with this error
kernel check fail device 2 binary 1 boot
i try all versions of odin with all factory firmware availlable for my region(from sammobile) i struggle for 5 days. i know that i need the firmware with U1.
I try with an old version of Smart switch it does recognize model but serial number is wrong seems that it doesn't exist on samsung database.
the phone is original not a clone.
seems i can't figure out what is wrong. i also try to put custom os from within twrp nothing works . please advice me because i don't have any idea .
sorry for my bad english. thanks in advance
tekken1979 said:
Hy i tried to root my sm-m205fn and i ended with this error
kernel check fail device 2 binary 1 boot
i try all versions of odin with all factory firmware availlable for my region(from sammobile) i struggle for 5 days. i know that i need the firmware with U1.
I try with an old version of Smart switch it does recognize model but serial number is wrong seems that it doesn't exist on samsung database.
the phone is original not a clone.
seems i can't figure out what is wrong. i also try to put custom os from within twrp nothing works . please advice me because i don't have any idea .
sorry for my bad english. thanks in advance
Click to expand...
Click to collapse
the phone was flashed with U1 but the device is U2 now kernel is corrupt sboot is corrupt ..... almost all files. need to erase all.
tekken1979 said:
the phone was flashed with U1 but the device is U2 now kernel is corrupt sboot is corrupt ..... almost all files. need to erase all.
Click to expand...
Click to collapse
SOLVED by myself this thread can be closed.
help me!
tekken1979 said:
SOLVED by myself this thread can be closed.
Click to expand...
Click to collapse
Don't close mate. Help me I need your help. Exactly same case i have explained it all here . Help me out brother. https://forum.xda-developers.com/galaxy-m20/help/help-t3986897
In short, I can't boot into anything.
You'll forever be my hero. Help me solve this thing bro.
Rooted.ndroid said:
Don't close mate. Help me I need your help. Exactly same case i have explained it all here . Help me out brother. https://forum.xda-developers.com/galaxy-m20/help/help-t3986897
In short, I can't boot into anything.
You'll forever be my hero. Help me solve this thing bro.
Click to expand...
Click to collapse
As i said in private message download the correct firmware and flash with odin
connect phone to laptop via usb cable. keep pressing Volume down and power till phone restarts then keep pressing both volume up and down till a blue screen appear then press volume up.
If flash fail then u use the wrong firmware look at this Letter and number when u look for firmware download.
I use the firmware name for SM-m205FN/DS for explanation
M205FDDU2BSH3
If the odin fail to flash the firmware search for U1 firmware even it's for another country i use my phone in Germany and the firmware is for India
PS. sorry for my bad english
tekken1979 said:
As i said in private message download the correct firmware and flash with odin
connect phone to laptop via usb cable. keep pressing Volume down and power till phone restarts then keep pressing both volume up and down till a blue screen appear then press volume up.
If flash fail then u use the wrong firmware look at this Letter and number when u look for firmware download.
I use the firmware name for SM-m205FN/DS for explanation
M205FDDU2BSH3
If the odin fail to flash the firmware search for U1 firmware even it's for another country i use my phone in Germany and the firmware is for India
PS. sorry for my bad english
Click to expand...
Click to collapse
Thanks Mate
Please I need help with manual update to android 9.
OTA keeps saying processing failed
Below is my device info
Product Code SM-N950UZVAXAS
PDA N950USQU4CRF3
CSC N950UOYN3CRF2
Baseband N950USQS5CRKI
Bootloader N950USQS5CRKI
Messrben said:
Please I need help with manual update to android 9.
OTA keeps saying processing failed
Below is my device info
Product Code SM-N950UZVAXAS
PDA N950USQU4CRF3
CSC N950UOYN3CRF2
Baseband N950USQS5CRKI
Bootloader N950USQS5CRKI
Click to expand...
Click to collapse
You cannot OTA update from Baseband N950USQS5CRKI. You need to manually flash the latest version using Odin.
MrMike2182 said:
You cannot OTA update from Baseband N950USQS5CRKI. You need to manually flash the latest version using Odin.
Click to expand...
Click to collapse
Tell me how please. Never done it
Messrben said:
Tell me how please. Never done it
Click to expand...
Click to collapse
It's quite simple.. You download the latest version of firmware for the device which is N950USQS6DSI3 after it's downloaded you need to unzip it one time and then boot the phone into download mode and connect it to the PC USB port and open Odin and put the files in their respective place and then flash.
MrMike good to see you bro
My SM-N950U Still Rooted Note 8
butchieboy said:
MrMike good to see you bro
My SM-N950U Still Rooted Note 8
Click to expand...
Click to collapse
Thanks bro! Nice to see you too! How are you doing? Everything alright? I sent my Note 10 back because I just can't stand certain features or LACK of features namely the notification light being gone and the screen protectors breaking the fingerprint scanner so.. I don't know what phone to even get at this point now.
MrMike2182 said:
It's quite simple.. You download the latest version of firmware for the device which is N950USQS6DSI3 after it's downloaded you need to unzip it one time and then boot the phone into download mode and connect it to the PC USB port and open Odin and put the files in their respective place and then flash.
Click to expand...
Click to collapse
I'm seeing different carriers (vzw, tmb, cct, usc,spr) except mine which ends in XAS. Which will work for me? Will any of these stop my device from supporting my sim??
Messrben said:
I'm seeing different carriers (vzw, tmb, cct, usc,spr) except mine which ends in XAS. Which will work for me? Will any of these stop my device from supporting my sim??
Click to expand...
Click to collapse
Doesn't matter they're all the same just choose whichever and flash it the phone will choose the correct information on it's own!
Are there update limits? I usually get a new phone, root it, find a rom I like and stick with it a long time. I recently updated many apps and they are not working right. Only google maps will get the location from the GPS for example. Also trying to get it to work with my new car radio (kenwood) with wireless mirroring and android auto. Anyway, as much as I like root, I am thinking it may be time to just update. I am currently at N950USQS2BQK2. Yeah way back. Can I odin a current like N950UOYN7DSK3 or do I have to go in steps? Also how do I get an unlocked USA from sammobile? Just pick a USA that doesn't list a carrier? Any other gotcha's since 2017?
Thanks,
Bob
Hi.
I have downloaded and installed by TWRP this BL file;
https://androidfilehost.com/?fid=4349826312261628198
That by mistake I wanted to install this other BL;
https://androidfilehost.com/?fid=11410963190603901376
And now it turns out that when I start I don't have IMEI. How can I solve it?
My device is a;
Samsung Galaxy Note 8 SM-N950F.
Android 8.
I have tried to install a 5-file ROM (BL, AP, CP, CSC AND USER DATA) and ODIN gives me FAIL. When the phone is in DOWNLOAD mode I get a red letter on the bottom that says; SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8. BINARY: 5.
Please help!!
D-Mak said:
Hi.
I have downloaded and installed by TWRP this BL file;
https://androidfilehost.com/?fid=4349826312261628198
That by mistake I wanted to install this other BL;
https://androidfilehost.com/?fid=11410963190603901376
And now it turns out that when I start I don't have IMEI. How can I solve it?
My device is a;
Samsung Galaxy Note 8 SM-N950F.
Android 8.
I have tried to install a 5-file ROM (BL, AP, CP, CSC AND USER DATA) and ODIN gives me FAIL. When the phone is in DOWNLOAD mode I get a red letter on the bottom that says; SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8. BINARY: 5.
Please help!!
Click to expand...
Click to collapse
When I have lost IMEI before, flashing stock filmware has resolved it for me.
You are getting that error in Odin as you are trying to flash bootloader 5 over bootloader 8. You can't downgrade the bootloader version. You need to download the latest filmware.
I take it you updated your phone in the last couple of days to be on bootloader 8. Just download that same filmware and it should flash fine.
stonedpsycho said:
When I have lost IMEI before, flashing stock filmware has resolved it for me.
You are getting that error in Odin as you are trying to flash bootloader 5 over bootloader 8. You can't downgrade the bootloader version. You need to download the latest filmware.
I take it you updated your phone in the last couple of days to be on bootloader 8. Just download that same filmware and it should flash fine.
Click to expand...
Click to collapse
It works now!
I have downloaded the last available ROM and I have flashed it with Odin and to start everything went well.
Thank you very much @stonedpsycho :good:
hi
I have Galaxy Note 8 - N950F DOUS , my mobile used to restart on its own two to three times a day, so I thought I need to change my present rom which was -{ [Note 8][OneUI Pie][JetBlackUI][06Apr-2020][v50] LightROM}so first I tried LineageOS17 but it did not install so I did a clean wipe and reflashed the Oneui Pie Light Rom again, I noticed no network so after checking the phone info I saw both my IMEI is showing NA , yes the problem of restarting did go but both my both -IMEI numbers are also gone, I reflashed it a few times but its same, I reinstalled my backup but still no IMEI, I tried everything I cannot get back my IMEI, I do have it on the box and back of my phone but I don't know what to do, any help please , its been three days my phone is dead no IMEI, please advice, I am not a phone expert just know basics, Please don't mind , if I have to install the original rom or something please , Please give me links. Thanks in advance. Guys please Help. oh, I installed it throw USB is that a problem ?
Samad.
zdarkstranger said:
hi
I have Galaxy Note 8 - N950F DOUS , my mobile used to restart on its own two to three times a day, so I thought I need to change my present rom which was -{ [Note 8][OneUI Pie][JetBlackUI][06Apr-2020][v50] LightROM}so first I tried LineageOS17 but it did not install so I did a clean wipe and reflashed the Oneui Pie Light Rom again, I noticed no network so after checking the phone info I saw both my IMEI is showing NA , yes the problem of restarting did go but both my both -IMEI numbers are also gone, I reflashed it a few times but its same, I reinstalled my backup but still no IMEI, I tried everything I cannot get back my IMEI, I do have it on the box and back of my phone but I don't know what to do, any help please , its been three days my phone is dead no IMEI, please advice, I am not a phone expert just know basics, Please don't mind , if I have to install the original rom or something please , Please give me links. Thanks in advance. Guys please Help. oh, I installed it throw USB is that a problem ?
Samad.
Click to expand...
Click to collapse
First off, did you back up your EFS folder before flashing a rom? You should always do this. If you did, try restoring the EFS with TWRP.
If that fails, flash stock filmware with Odin. The thread below gives you all the information you need to do this. At the end of post number 2, you can download Samfirm, this is an excellent program for Pc that will allow you to download the filmware much faster than a free SamMobile account or Updato.
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
stonedpsycho said:
First off, did you back up your EFS folder before flashing a rom? You should always do this. If you did, try restoring the EFS with TWRP.
If that fails, flash stock filmware with Odin. The thread below gives you all the information you need to do this. At the end of post number 2, you can download Samfirm, this is an excellent program for Pc that will allow you to download the filmware much faster than a free SamMobile account or Updato.
https://forum.xda-developers.com/galaxy-note-8/how-to/official-stock-firmware-update-odin-t3677072
Click to expand...
Click to collapse
there is no backup of EFS, I just pressed backup and got three options then, - Boot, System and Data.
zdarkstranger said:
there is no backup of EFS, I just pressed backup and got three options then, - Boot, System and Data.
Click to expand...
Click to collapse
Try flashing stock filmware then, this will usually resolve this issue. All you need to know on how to do this is in the link I posted above.
stonedpsycho said:
Try flashing stock filmware then, this will usually resolve this issue. All you need to know on how to do this is in the link I posted above.
Click to expand...
Click to collapse
HI AGAIN I tried using Samfirm, I put in SM-N950F and Region Middle east as the country in phone is United Arab Emirates, but its asking to please verify input or use manual, but where can I find information for ( PDA, CSC AND PHONE ) and do I use Middle East ? thanks
zdarkstranger said:
HI AGAIN I tried using Samfirm, I put in SM-N950F and Region Middle east as the country in phone is United Arab Emirates, but its asking to please verify input or use manual, but where can I find information for ( PDA, CSC AND PHONE ) and do I use Middle East ? thanks
Click to expand...
Click to collapse
Leave it on auto, put the model number in the Model section, for region put XSG, which I believe is correct for UAE.
zdarkstranger said:
HI AGAIN I tried using Samfirm, I put in SM-N950F and Region Middle east as the country in phone is United Arab Emirates, but its asking to please verify input or use manual, but where can I find information for ( PDA, CSC AND PHONE ) and do I use Middle East ? thanks
Click to expand...
Click to collapse
ok got it ,Region - yes UAE is (XSG) Thanks again , downloading now .
stonedpsycho said:
Leave it on auto, put the model number in the Model section, for region put XSG, which I believe is correct for UAE.
Click to expand...
Click to collapse
Just I quick question, I can flash it in TWRP right ? or do I need Odin ?
Thank you so much .:good:
zdarkstranger said:
Just I quick question, I can flash it in TWRP right ? or do I need Odin ?
Thank you so much .:good:
Click to expand...
Click to collapse
Odin. You can also find the download for that in the thread link I posted to you.
stonedpsycho said:
Odin. You can also find the download for that in the thread link I posted to you.
Click to expand...
Click to collapse
Thanks you and I already have it installed. :good:
stonedpsycho said:
Odin. You can also find the download for that in the thread link I posted to you.
Click to expand...
Click to collapse
Hi man, am in trouble, that samfirm downloader is a pain, its downloaded more then one GB and stopped when i choose to append download it said connection lost , start again, happened 3 times and then I tried to download by Jdownloader from other sites, and I downloaded a firmware but it's not installing, I was using android 9 and maybe I downloaded android 8 , really internet has become hell, most downloads are scams and spam, anyway I don't know where to download the latest firmware, if you could please give me a link, terrible here because the internet is so slow I started download yesterday and today just got completed, sorry to disturb you but I really don't understand where to download the latest firmware from, thank you again.
zdarkstranger said:
Hi man, am in trouble, that samfirm downloader is a pain, its downloaded more then one GB and stopped when i choose to append download it said connection lost , start again, happened 3 times and then I tried to download by Jdownloader from other sites, and I downloaded a firmware but it's not installing, I was using android 9 and maybe I downloaded android 8 , really internet has become hell, most downloads are scams and spam, anyway I don't know where to download the latest firmware, if you could please give me a link, terrible here because the internet is so slow I started download yesterday and today just got completed, sorry to disturb you but I really don't understand where to download the latest firmware from, thank you again.
Click to expand...
Click to collapse
You can download from SamMobile, you will have to create a free account so you can download. I suggest using ADM (advanced download manager) as your internet is not good, it should let you carry on downloading if it gets interrupted.
Here is the filmware link (SamMobile is safe to use)
https://www.sammobile.com/samsung/galaxy-note-8/firmware/SM-N950F/XSG/download/N950FXXSADTB1/325565/
If the download in Samfirm stops at any point the download becomes corrupted, and you have to start again! So this way should be better for you (SamMobile)
stonedpsycho said:
You can download from SamMobile, you will have to create a free account so you can download. I suggest using ADM (advanced download manager) as your internet is not good, it should let you carry on downloading if it gets interrupted.
Here is the filmware link (SamMobile is safe to use)
https://www.sammobile.com/samsung/galaxy-note-8/firmware/SM-N950F/XSG/download/N950FXXSADTB1/325565/
If the download in Samfirm stops at any point the download becomes corrupted, and you have to start again! So this way should be better for you (SamMobile)
Click to expand...
Click to collapse
Thank you, I have a free account, but this site is very annoying, just does not allow free download, like force buy, that will never happen, I WILL buy another Mobile if I have to but will never pay to download from SamMobile site. :good:
zdarkstranger said:
Thank you, I have a free account, but this site is very annoying, just does not allow free download, like force buy, that will never happen, I WILL buy another Mobile if I have to but will never pay to download from SamMobile site. :good:
Click to expand...
Click to collapse
Maybe it has changed, I have not used it for a good while, you used to be able to download for free but at a very slow speed.
You could try Updato.com, but I'm not sure if it has the latest firmware.
stonedpsycho said:
Maybe it has changed, I have not used it for a good while, you used to be able to download for free but at a very slow speed.
You could try Updato.com, but I'm not sure if it has the latest firmware.
Click to expand...
Click to collapse
Thank you so much again, you are a great person, I got a super site, lets you download the ROm like free ans super fast, I used Jdownloader , I could not find proper ADM most were viruses as soon as it got downloaded the Antivirus blocked it saying virus. Anyway the download speed was 15. mb plus, and it installed and my IMEI is back, again I thank you so much.
I put up the link if anyone else needs to download the Firmware in the future. here's the link -
https://samfrew.com/download/Galaxy__Note8__/zfm4/XSG/N950FXXSADTB1/N950FOXMADTB1/
zdarkstranger said:
Thank you so much again, you are a great person, I got a super site, lets you download the ROm like free ans super fast, I used Jdownloader , I could not find proper ADM most were viruses as soon as it got downloaded the Antivirus blocked it saying virus. Anyway the download speed was 15. mb plus, and it installed and my IMEI is back, again I thank you so much.
I put up the link if anyone else needs to download the Firmware in the future. here's the link -
https://samfrew.com/download/Galaxy__Note8__/zfm4/XSG/N950FXXSADTB1/N950FOXMADTB1/
Click to expand...
Click to collapse
I apologise that ADV seemed to be a virus for you I won't recommend that ever again to someone. It seemed to work fine for Windows Defender...
Really glad you have fixed your issue though :highfive:
Hello there, I'm stuck with a situation and I can't fix the phone.
I live in Canada and I bought the phone here (Canadian software version and also unlocked) and gave it to a relative who lives in the USA to use. Recently, she has a firmware update notification from her phone, however, it always gets stuck at 28%, and the download fails. So she plugged the s10 device into her computer and used Smart Switch to download the new firmware. After she finished downloading it, she clicked to install the new firmware on her phone. That's when the problem starts... She got stuck on this screen forever and she even tried to soft reset/restart the phone but it just went back to that screen.
What I think happened was it's a Canadian version phone but the new firmware is the US version and it tried to install and crashed.
Could anyone give me some advice on fixing this problem?
jimyall said:
Hello there, I'm stuck with a situation and I can't fix the phone.
I live in Canada and I bought the phone here (Canadian software version and also unlocked) and gave it to a relative who lives in the USA to use. Recently, she has a firmware update notification from her phone, however, it always gets stuck at 28%, and the download fails. So she plugged the s10 device into her computer and used Smart Switch to download the new firmware. After she finished downloading it, she clicked to install the new firmware on her phone. That's when the problem starts... She got stuck on this screen forever and she even tried to soft reset/restart the phone but it just went back to that screen.
What I think happened was it's a Canadian version phone but the new firmware is the US version and it tried to install and crashed.
Could anyone give me some advice on fixing this problem?
Click to expand...
Click to collapse
youre gonna want to flash the FW with Odin. I can give further details if the solution i provided doesnt make sense
Youdoofus said:
you're gonna want to flash the FW with Odin. I can give further details if the solution I provided doesn't make sense
Click to expand...
Click to collapse
Could you please provide me more details? I'm not really a tech person >_>. Do I need to flash the FW with new Canadian version of FW? Also where can i download Odin from a trusted source?
jimyall said:
Could you please provide me more details? I'm not really a tech person >_>. Do I need to flash the FW with new Canadian version of FW? Also where can i download Odin from a trusted source?
Click to expand...
Click to collapse
for sure man, i sometimes skip the long winded Odin stuff because ive typed out like 3 paragraphs of Odin instructions and the person i was replying to already knew 75% of what i just typed LOL
aaaaanyways, downloading Odin from a trusted source isnt an issue. Ive downloaded soooo many versions of Odin over the years and from so many different places, i cant imagine an infected Odin. Im sure they exist, but ive never seen one. ive got Odin from here before, and it was fine. Also, yes, youd definitely want to download the canadian version of it. You should be able to flash the U1 version (fully unlocked) so long as you have a snapdragon processor, but youd need whats called "Patched Odin" to do it. The U1 thing is kind of a tangent, but youll find out that there are a TON of rabbit holes you can find yourself in from time to time. The best thing to do is to just flash the FW for the model of phone you own unless you plan on tinkering. sammobile.com/firmwares is where you want to search for the FW and samfirm is an exe youre going to want to use to actually download the FW itself. Samfirm downloads it literally 5x faster.
Youdoofus said:
for sure man, i sometimes skip the long winded Odin stuff because ive typed out like 3 paragraphs of Odin instructions and the person i was replying to already knew 75% of what i just typed LOL
aaaaanyways, downloading Odin from a trusted source isnt an issue. Ive downloaded soooo many versions of Odin over the years and from so many different places, i cant imagine an infected Odin. Im sure they exist, but ive never seen one. ive got Odin from here before, and it was fine. Also, yes, youd definitely want to download the canadian version of it. You should be able to flash the U1 version (fully unlocked) so long as you have a snapdragon processor, but youd need whats called "Patched Odin" to do it. The U1 thing is kind of a tangent, but youll find out that there are a TON of rabbit holes you can find yourself in from time to time. The best thing to do is to just flash the FW for the model of phone you own unless you plan on tinkering. sammobile.com/firmwares is where you want to search for the FW and samfirm is an exe youre going to want to use to actually download the FW itself. Samfirm downloads it literally 5x faster.
Click to expand...
Click to collapse
For the firmware, do I just download the latest one for Canada Version? There are so many links so do I just click on Canada (the one without Provider) and Do i download PDA or CSC or both? My phone is unlocked already btw. Also will i able to flash my phone even though it is currently stuck in the "BLUE SCREEN OF DEATH"?
I even tried to you the samfirm to download the firmware but it keeps saying authorization failed after I filled in the blank and clicked update.
Checking firmware for SM-G973W/XAC/G973WVLS4ETK1/G973WOYV4ETK1/SMG973WW12/G973WVLS4ETK1
Error: Could not send BinaryInform. Status code 200/401
Authorization failed
jimyall said:
For the firmware, do I just download the latest one for Canada Version? There are so many links so do I just click on Canada (the one without Provider) and Do i download PDA or CSC or both? My phone is unlocked already btw. Also will i able to flash my phone even though it is currently stuck in the "BLUE SCREEN OF DEATH"?
I even tried to you the samfirm to download the firmware but it keeps saying authorization failed after I filled in the blank and clicked update.
Checking firmware for SM-G973W/XAC/G973WVLS4ETK1/G973WOYV4ETK1/SMG973WW12/G973WVLS4ETK1
Error: Could not send BinaryInform. Status code 200/401
Authorization failed
Click to expand...
Click to collapse
yep. sorry, i forgot to mention that part. Zero worry tho, its just a thing caused by the bootloader that your phone was most recently on being too new for the FW youre trying to flash. Thats whats causing the binary error, the binary currently installed is greater than the one youre trying to install so the phone wont physically allow it. Its not even a software thing, it gets hard coded. Anyways, get the most current one and reflash. It wont fail again with the same reason on the newest firmware, but if it does fail, try a different cable, download the file again. it might have corrupted during the download. If youre not using patched Odin, you literally cant screw it up so badly you cant recover it
Youdoofus said:
yep. sorry, i forgot to mention that part. Zero worry tho, its just a thing caused by the bootloader that your phone was most recently on being too new for the FW youre trying to flash. Thats whats causing the binary error, the binary currently installed is greater than the one youre trying to install so the phone wont physically allow it. Its not even a software thing, it gets hard coded. Anyways, get the most current one and reflash. It wont fail again with the same reason on the newest firmware, but if it does fail, try a different cable, download the file again. it might have corrupted during the download. If youre not using patched Odin, you literally cant screw it up so badly you cant recover it
Click to expand...
Click to collapse
thanks you! I used Frija to download the latest Canadian version of the firmware. Next step do I just use the Odin to flash and follow the instruction on sammobile websites? Can I flash the new firmware without deleting data on my phone?
jimyall said:
thanks you! I used Frija to download the latest Canadian version of the firmware. Next step do I just use the Odin to flash and follow the instruction on sammobile websites? Can I flash the new firmware without deleting data on my phone?
Click to expand...
Click to collapse
yep, when flashing the 4 parts of the FW, the home_csc will not wipe your userdata, csc will factory reset. let us know if you run into trouble, but you shouldnt have any issues. it sounds like you got this
Thank you so so much! I fixed the phone and it works now. For future firmware updates, I have to do this every time? Is there any option that i can change my firmware permanently to the US version so that I can get auto-update on the phone instead of using ODIN every time?