Related
I'm rooted 5.1.1 and wanted to try and activate Android Pay since my bank is supported. Found some workarounds people were posting online, but they seem to not work for certain devices/roms. Just wondering if anyone here has had success.
Nope, I've tried everything short of flashing from ftf. I'm also curious if anyone's had luck.
Sent from my iPad using Tapatalk
Tried rootcloak for hiding root to Android pay?
Disable SuperSU in settings, setup android pay, re-enable SuperSU - worked for me.
Android Pay + Root?
cschmitt said:
Disable SuperSU in settings, setup android pay, re-enable SuperSU - worked for me.
Click to expand...
Click to collapse
Just tried this and couldn't get it to work.... can you give some more detail since I might be doing something wrong. Thanks! I unchecked the setting for (enable Superuser) is that correct?
Bayouland1 said:
Just tried this and couldn't get it to work.... can you give some more detail since I might be doing something wrong. Thanks! I unchecked the setting for (enable Superuser) is that correct?
Click to expand...
Click to collapse
Yes, that's exactly what I did. Are you receiving 'unable to add card' or 'could not verify system' (something like that.)
Guys i had this issue and then i flashed a PRF zip and set up android pay and it worked fine. Then i enabled xposed and all i think it came with supersu but i didnt use any root apps before setting up Android pay. But now i tried to use it and it said my card was not supported... maby my bank??It worked fine on Google Wallet. So i deleted card and was gonna re add it but now cant get past the error message again. I have rootcloak and disable device check xposed modules still no worky. Please let me know if you find a fix.
Sent from my D5803 using Tapatalk
I've seen a few threads on the Blackberry Work app, but they all seemed have become idle at the end of 2017. Has anyone been able to run new versions of Blacberry Work with the new versions of Magisk?
I'm running an unrooted custom ROM, but the way new versions of the ROM are compiled (using Android Clang) are triggering the checker. Was hoping I could flash Magisk to hide root and custom rom detection from the app.
It depends on what the app is detecting, of course, but take a look under "Hiding root from apps" in the troubleshooting guide. The rest of the post might have some useful tips as well.
I ended up installing Magisk and hiding from the app. It works really well, so we can go ahead and close this thread. Thanks for the follow up.
napes22 said:
I ended up installing Magisk and hiding from the app. It works really well, so we can go ahead and close this thread. Thanks for the follow up.
Click to expand...
Click to collapse
Is BB Work still working for you with Magisk? Our company moved to BB Good (now Work) years ago. I stopped rooting back then since it was too much of a hassle to figure out and I need to have my work email. If this works, the only thing holding me back would be getting official updates from OnePlus. I have the 5T.
jvnat said:
Is BB Work still working for you with Magisk? Our company moved to BB Good (now Work) years ago. I stopped rooting back then since it was too much of a hassle to figure out and I need to have my work email. If this works, the only thing holding me back would be getting official updates from OnePlus. I have the 5T.
Click to expand...
Click to collapse
Yes I can confirm that magisk root does work with BB Work. You have to use the "hide" function in the Magisk Manager and select BB work.
FYI
I am using a stock rom with root.
Tip: don't use xposed framework if you want a working BB work app.
I flashed Magisk in my redmi note 3 kate and installed the magisk manager apk app, everything is working fine, but my question is: Should I install phhSuperUse, rather than this variant has SU because it was built to be installed with magisk ?
Excuse me, I'm not very familiar with the subject and I've been reading about this and I'm a little confused
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
What is the difference when using the magisk modules?
always use xposed framework plus S.U. But since I can no longer download some apps in play store I have resorted to install magisk on my device.
Hello,
Is it still working ?
It work with Good for Enterprise , but i am not able to install UEM Client and BB Work ?
UEM Client seems fine and show device as unrooted but then setting up Blackberrry Dynamics failed due to that , any idea ?
Regards,
Darkwa said:
Yes I can confirm that magisk root does work with BB Work. You have to use the "hide" function in the Magisk Manager and select BB work.
FYI
I am using a stock rom with root.
Tip: don't use xposed framework if you want a working BB work app.
Click to expand...
Click to collapse
I have a message bb work data wiped. And installation fails at the last point. How can I solve it?
Greetings
Wysłane z mojego MI 6 przy użyciu Tapatalka
As of yesterday, blackberry is detecting my root for some reason. Nothing has changed so my guess is that it has something to do with my company's policy changing? At this point I'm very confused
napes22 said:
As of yesterday, blackberry is detecting my root for some reason. Nothing has changed so my guess is that it has something to do with my company's policy changing? At this point I'm very confused
Click to expand...
Click to collapse
I am in the same boat. I can no longer get Magisk 18.0 and BB Work (or any of the BB enterprise apps) to function. I immediately get the "jailbroken" message. I have no idea what changed. :crying:
I am going to try 18.1 and will report if things change.
DaCHeF36 said:
I am in the same boat. I can no longer get Magisk 18.0 and BB Work (or any of the BB enterprise apps) to function. I immediately get the "jailbroken" message. I have no idea what changed. :crying:
I am going to try 18.1 and will report if things change.
Click to expand...
Click to collapse
Magisk 18.1, Manager 7.0, and following this guide is what works:
https://www.didgeridoohan.com/magisk/MagiskHide
Make sure the "Basics" are taken care of, manually.
Hide Magisk Manager package under settings, MagiskHide "Work" only now (no "Work Profile" choice present in the new version). I removed all root-requiring apps. The combo here worked. I may go one by one to see if any of those apps made a difference. Regardless, it works following those instructions. Good luck. :good:
DaCHeF36 said:
Magisk 18.1, Manager 7.0, and following this guide is what works:
https://www.didgeridoohan.com/magisk/MagiskHide
Make sure the "Basics" are taken care of, manually.
Hide Magisk Manager package under settings, MagiskHide "Work" only now (no "Work Profile" choice present in the new version). I removed all root-requiring apps. The combo here worked. I may go one by one to see if any of those apps made a difference. Regardless, it works following those instructions. Good luck. :good:
Click to expand...
Click to collapse
Perfection, thanks so much. Running DU on taimen with Magisk 18.1 substratum TitaniumBackup Franco app. All good!
Sent from my Pixel 2 XL using Tapatalk
Blackberry Appstore
bigknowz said:
Perfection, thanks so much. Running DU on taimen with Magisk 18.1 substratum TitaniumBackup Franco app. All good!
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
@DaCHeF36 Spoke too soon, not able to load BB Access or Appstore, thoughts?
bigknowz said:
@DaCHeF36 Spoke too soon, not able to load BB Access or Appstore, thoughts?
Click to expand...
Click to collapse
I'm not sure about the Appstore, but I am stuck at an "Authenticating" screen for Access. If I make any progress I'll let you know.
Canary
DaCHeF36 said:
I'm not sure about the Appstore, but I am stuck at an "Authenticating" screen for Access. If I make any progress I'll let you know.
Click to expand...
Click to collapse
Everything works on Canary, running 18100.
bigknowz said:
Everything works on Canary, running 18100.
Click to expand...
Click to collapse
Magisk 19.0 and the new 7.1.1 Manager combination seem to work with all BB apps. Maybe it's just me, but the Work Profile option returned in Hide.
Are there any dependencies for BB apps we need to also hide from Magisk?
DaCHeF36 said:
Magisk 19.0 and the new 7.1.1 Manager combination seem to work with all BB apps. Maybe it's just me, but the Work Profile option returned in Hide.
Click to expand...
Click to collapse
I only need to use the BB work app, are you hiding any other app except BB Work ? Also,a) are you hiding the Magisk Manager, b)using Magisk Hide to hide BB Work or c)doing both?
TarunN5 said:
I only need to use the BB work app, are you hiding any other app except BB Work ? Also,a) are you hiding the Magisk Manager, b)using Magisk Hide to hide BB Work or c)doing both?
Click to expand...
Click to collapse
Work and Work profile setup are hidden. Work profile setup is definitely there again. I use Access, Tasks, and Connect too. I have them all hidden even though that may be overkill. I hide Magisk Manager using the built in package option too. I also followed the guide to ensure that all settings like debug, etc. were off. Gold. I excluded the BB apps from auto-updating. I don't plan to upgrade them unless the back-end requires it at some point.
DaCHeF36 said:
Work and Work profile setup are hidden. Work profile setup is definitely there again. I use Access, Tasks, and Connect too. I have them all hidden even though that may be overkill. I hide Magisk Manager using the built in package option too. I also followed the guide to ensure that all settings like debug, etc. were off. Gold. I excluded the BB apps from auto-updating. I don't plan to upgrade them unless the back-end requires it at some point.
Click to expand...
Click to collapse
Thanks, can you please tell me what exactly do you mean by "work profile" and "work profile setup". The app I see is i dont see a work profile app in the play store either. Can you also please send a screenshot of the BB apps that you have hidden in Magisk? This is the first time I'm using BB on my phone so pardon my noobness
Hello everyone. I have created this thread (hopefully in the right place) to start a discussion on methods/developing methods to get fortnite to work on a rooted device, with magisk installed. Im currently running Dr. Ketan's rom (android pie) on a samsung galaxy note 9 and for obvious reasons (the fortnite galaxy skin) would like to play a few games and have it work without any hiccups. Im not looking to hack the game or any nonsense like that, so if anyone has a currently functioning method that doesnt require me to reflash stock firmware (as i dont have a pc and had to use a friends to unlock bootloader and such) and play on the unrooted device then re-root and install custom rom
evan5935 said:
Hello everyone. I have created this thread (hopefully in the right place) to start a discussion on methods/developing methods to get fortnite to work on a rooted device, with magisk installed. Im currently running Dr. Ketan's rom (android pie) on a samsung galaxy note 9 and for obvious reasons (the fortnite galaxy skin) would like to play a few games and have it work without any hiccups. Im not looking to hack the game or any nonsense like that, so if anyone has a currently functioning method that doesnt require me to reflash stock firmware (as i dont have a pc and had to use a friends to unlock bootloader and such) and play on the unrooted device then re-root and install custom rom
Click to expand...
Click to collapse
Uhh. Its already working. Atleast for me. You just need to hide magisk manager , hide Fortnite app and installer on magisk hide tab, disable usb debugging, and make sure there isn't magisk named folder or files inside your internal storage. That should do it. I'm on the note 8 and it works just fine
white7561 said:
Uhh. Its already working. Atleast for me. You just need to hide magisk manager , hide Fortnite app and installer on magisk hide tab, disable usb debugging, and make sure there isn't magisk named folder or files inside your internal storage. That should do it. I'm on the note 8 and it works just fine
Click to expand...
Click to collapse
Dang, really? Thanks man!
evan5935 said:
Dang, really? Thanks man!
Click to expand...
Click to collapse
Yep!! Its working on mine ....
white7561 said:
Yep!! Its working on mine ....
Click to expand...
Click to collapse
Its not workin for me bro, i hide magisk manage, have no folders or files named makgisk, or even have magisk in the name, hide the root apps with magisk as well as the fortnite installer and app before i launch each of them. It just deosnt work for me :'(
Are you running in magisk core mode, with adb/root disabled as well?
And what about USB/ADB Debugging? Have you turned that off as well?
white7561 said:
Yep!! Its working on mine ....
Click to expand...
Click to collapse
Didgeridoohan said:
And what about USB/ADB Debugging? Have you turned that off as well?
Click to expand...
Click to collapse
Yes but developer options is still on, does that make a difference? Also, I have not tried with magisk core mode off and root disabled, so if you are doing that then that may also be my issue
Edit: i turned on magisk core mode and disabled root and still does not work. Would having lucky patcher installed be an issue?
evan5935 said:
Yes but developer options is still on, does that make a difference? Also, I have not tried with magisk core mode off and root disabled, so if you are doing that then that may also be my issue
Edit: i turned on magisk core mode and disabled root and still does not work. Would having lucky patcher installed be an issue?
Click to expand...
Click to collapse
Prob yeah ...
white7561 said:
Prob yeah ...
Click to expand...
Click to collapse
Definitely was the issue. Deleted lucly patcher and also the Xposed installer (even though exposed isnt on Pie yet) and that combined with everything else did the trick
evan5935 said:
Definitely was the issue. Deleted lucly patcher and also the Xposed installer (even though exposed isnt on Pie yet) and that combined with everything else did the trick
Click to expand...
Click to collapse
Yep. Also . No xposed . Since it fails the safety net [emoji4]. Well. Happy gaming!! [emoji4][emoji4][emoji4]
Working still Season 9 Magisk 19.1? Not I
Anybody still using this method? I get all the way to the drop then get kicked out "can't sync user profile"
Magisk is hidden in a random folder, installer and game both hidden. Tried with Developer settings off and also with them on. Rooted.
Even Google Pay works so I'm head scratching here if there is a system processes that is now needing hidden or what to play the newest Beta. All help appreciated.
I have the same problem. Google pay is working but fortnite not
I'm on a rooted OnePlus 7 Pro and mine just stopped working yesterday. Was fine for about an hour after the Star Wars event then logged on around 10pm and I get kicked out as soon as I exited the bus. Keeps happening over and over again. No other software changes so I'm guessing there needs to be some update to Magisk to get it working again.
Chuck_C said:
I'm on a rooted OnePlus 7 Pro and mine just stopped working yesterday. Was fine for about an hour after the Star Wars event then logged on around 10pm and I get kicked out as soon as I exited the bus. Keeps happening over and over again. No other software changes so I'm guessing there needs to be some update to Magisk to get it working again.
Click to expand...
Click to collapse
Curious what was your setup? To have it work?
Pvt WhoOkid said:
Curious what was your setup? To have it work?
Click to expand...
Click to collapse
Stock OnePlus 7 pro with magisk and TWRP. Epic launcher and Fortnite both hidden in magisk hide. USB debugging turned off. No modules installed. Just using it for root. Worked fine until last night. Gpay and all other safety net apps work fine. It's just Fortnite. Logged in on a friend's Xbox and a really laggy ipad and could play on both so it's not my account - it's definitely the rooted phone and magisk no longer hides itself from Fortnite.
I'm really irritated with the whole thing because I was so close to finishing the season pass and now I can't play at all.
Here's another fix. These last few updates they have added more things to the blacklist. So remember that they basically scans the internal sdcard etc for MagiskManager folder right? Well now they scan TWRP folder too!! So try renaming it to something else without TWRP in it. And see if it works!. Just tried mine and still working just fine!
white7561 said:
Here's another fix. These last few updates they have added more things to the blacklist. So remember that they basically scans the internal sdcard etc for MagiskManager folder right? Well now they scan TWRP folder too!! So try renaming it to something else without TWRP in it. And see if it works!. Just tried mine and still working just fine!
Click to expand...
Click to collapse
Thanks for posting that. I renamed the folder and now it works again.
Now I need to figure out if I can leave it that way or if I need to keep switching the folder name back and forth to be able to use TWRP correctly.
Chuck_C said:
I'm on a rooted OnePlus 7 Pro and mine just stopped working yesterday. Was fine for about an hour after the Star Wars event then logged on around 10pm and I get kicked out as soon as I exited the bus. Keeps happening over and over again. No other software changes so I'm guessing there needs to be some update to Magisk to get it working again.
Click to expand...
Click to collapse
I have pretty much the same setup as you. Do you happen to get lag here and there? During game play? I was able to get mine working again by renaming the folder for trwp as suggested.
Chuck_C said:
Thanks for posting that. I renamed the folder and now it works again.
Now I need to figure out if I can leave it that way or if I need to keep switching the folder name back and forth to be able to use TWRP correctly.
Click to expand...
Click to collapse
With Tasker or Automate, you can set a trigger to automatically rename folder on start of Fortnite and rename back, after the game is closed.
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
hycraig said:
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
Click to expand...
Click to collapse
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
vash_h said:
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Biggest_Noob said:
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
Click to expand...
Click to collapse
My safteynet passes fine on both my devices
Thanks
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
h4lli said:
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
Click to expand...
Click to collapse
thanks @h4lli i couldn't see sky go version 13.1.1 for uk
so i got Sky Go UK 12.4.14 from apkmirror and can confirm is working fine
yeah still doesnt work, latest sky go app 20, latest magisk, still detects, anyone able to reverse the sky app to see what methods its using?
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
beardymarrow said:
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
Click to expand...
Click to collapse
Yeah still can't get it working. Damn it.
Hast everyone a sollution for running the sky Go App on rooted phones?
Skygo doesnt Work... hast anyone a sollution?
eula1977 said:
Skygo doesnt Work... hast anyone a sollution?
Click to expand...
Click to collapse
Have you tried this? It worked for me
SkyGo app detected root!
Hi everyone i have a problema using SkyGo app on my device because It detects the root. I renamed magisk , used magisk Hide , tried magiskhide props config , tried to delete cache and re-install SkyGo app but nothing worked...any solution...
forum.xda-developers.com
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Same here...
I am using MicroG without Safetynet support and I think that is the issue, unfortunately.
Payconiq by bancontact / rooted device
Hello
I have the same problem with OP6 rooted ... magisk hide activated but when run the payconiq Bancontact app " There is an error " not possible to run the app.
Anybody for a solution ?
veronesi.n said:
Hi everyone,
I'm just hitting my head against the wall with this applciation...
I'm running OP6 with evolution X 4.5.
This app refuses to let me uses it saying that "There's an error, Check if usb debugging is activated. Check if you're rooted or if a custom rom is installed"
I've tried magisk hide, also hidding some google services, usb debugging isn't activated,...
It's the only app I knoiw so far that can detect root on my phone.
Can anyone help me find a workaround please?
thanks.
Click to expand...
Click to collapse
I used to use an old apk of the app but now it doesn't let me use it and forces me to upgrade to last version.
My wife's app is working well but she has a lg g7 thinq unrooted.
So if someone can help, it would be very much appreciated as every other app is working well, safety net is passed, and this app is my only way to pay contactless because my banking app doesn't have a payement option in it.
I'm using it without issues. I hide it and just turn off USB debugging when I'm using it.
Just to make sure, did you just enable Magisk Hide in the options and nothing else?
Or did you also - after enabling - go into the Magisk Hide option that now appeared in the menu and placed a checkmark after all programs for which you want to hide Magisk from, in this case Payconiq ?
Clear Payconiq cache and data, reboot and setup Payconiq.
I have the same problem.
Magic hide is enabled. USB debugging is disabled.
In the Magic hide menu, the Payconiq app has a checkmark. All my other banking apps work fine.
Phone = Samsung J7 (2016)
Does someone have a solution?
Thanks
What's your problem with this app Can't you run it Can someone show what message is showing For me, this application is not available in my country, so I downloaded it from outside. I have Magisk 21000 root and Magisk manager 8.0.2 (307) (11) and it works for me and nothing is screaming about root etc :highfive:
It is the "Payconiq by Bancontact" app.
It worked on my phone without root. Since my phone is rooted, it doesn't work any more.
My phone is rooted with Magisk 20.4 (20400) and Manager 8.0.2 (307)
When I use the app: I receive this message. I hope this can help...
Date: 12 Oct 2020 15:23:47 GMT+02:00
Device: samsung SM-J710F
App version: 5.5.3
OS version: 8.1.0
App token: /
Failure code: ERROR_SDK_INTEGRITY (81)
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Veke123 said:
Hello,
Problem solved.
Thanks to Spartacus500 .
I ’ve seen there is an other version of Magisk. I didn’t even know there was an update. :silly:
I did the following thinks:
In Magisk Hide menu, uncheck Payconiq app.
Stopped Payconiq app and Cleared data.
In Magisk Hide, place checkmark at payconiq app.
Installed Magisk 21.0 (21000) Beta.
Reboot.
Run Payconiq app, and it works fine
Hope it stay this way :fingers-crossed:
Click to expand...
Click to collapse
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
flotheking said:
Which version of the app did you use?
Is it 5.5.3?
Can you share the apk?
I tried 5.8.3, 5.5.3 and 5.3.3 but there are all stuck at the start.
I am passing all checks on rootbeerfresh (root checker).
Click to expand...
Click to collapse
I use the "Payconiq By Bancontact" app. I don't know which version it was that worked before, but after an update I can not run it anymore on a rooted phone.
I will send you the apk of the "Payconiq by Bancontact" app. Hope you can find a solution.
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
flotheking said:
I tried the other app (Payconiq) version 4.3.5.3 (latest) and it seems to be working.
Click to expand...
Click to collapse
sorry for bumping an old thread but what are you using now?
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
seeschloss said:
In my case I'm still using the old Payconiq and I don't know what I'm going to do when it gets finally phased out.
Well, I'll just pay in another way I guess.
Click to expand...
Click to collapse
thx for responding, what version are you using?
5.14.1 Payconiq app works for me Magisk hide root
Spartacus500 said:
5.14.1 Payconiq app works for me Magisk hide root
Click to expand...
Click to collapse
sadly not working for me, when i hide app in magisk, launching gets aborted without error message
got it working again
latest magisk, latest riru, lsposed, gravitybox all installed without issues to payconiq
payconiq app hidden in magisk, magisk manager isn't hidden
the thing that got it working again was disabling magisk module G-visual mod, same for magisk module fullscreen immersive gestures. Apparently payconiq app doesn't like keyboard spacing to be changed ????
i'm quite happy that i found it, but if anyone could explain i'd very gratefull
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Bergfex2 said:
Hello,
Can I also ask a question, please? How can payconiq detect that someone is using a custom-rom? I also get a message that I am using a Custom-rom and that it is not possible to install. However, I have not installed MAGISK and my phone is not rooted.
Thanks
Andi
Click to expand...
Click to collapse
Could be detecting your unlocked bootloader, various prop values, etc. For a list of props that are common detectors, and that MagiskHide changes (which of course is removed in the next stable release) you can check here:
https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf#setreset-magiskhide-sensitive-props