Database Develop

[ROM][GUIDE][UNOFFICIAL] ResurrectionRemix, LineageOS 15.1 + MORE! - Project Treble

Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!​

DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it

Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself

DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?

Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?

DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device

What about jio volte is it working on it and if yes then how because in minbe it is working

Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely

wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot

Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried

Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte

If you try arm64aonly it will stuck at mi logo.

DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link

M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it

M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed

M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/

can any1 confirm if volte works or not plz ?

xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix

Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!

Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.

[Guide] How to boot Port Rom

Introduction:
Hello guys am Yashraj Yadav, after alots of struggle and effort I am able to know how to boot port rom with the help of @AYUSH KUMAR and @sumitr3ddy so am sharing this method with you
How to chose device:
Make sure that the device from which you are porting rom has similar specification as your device some important thing which should be same are listed below :
Processor(Snapdragon 410 ==> Snapdragon 410)
Rom 64-bit to 64-bit, 32-bit to 32-bit
Resolution(1280*720)
Ram and Rom (not much necessary)
Camera(not much necessary)
How to Port boot.img:
Unpack the boot.img both stock and port (just google it in case you don't know how to do it)
Just go to folder where stock boot.img is unpacked
search for file "boot.img-zimage"(something like this)
And search for "boot.img-dtb"(something like this)
copy this both files and paste at same folder where port boot.img is unpacked
Repack the port boot.img
Done!!
This will make rom bootable, if not booting take rom from another device, Try this but if this not work (in roms like miui and roms like this ), try searching guide for that particular rom
Devices for Porting
From these devices you can try to port for oppo a37f
Redmi 2/Redmi 2 prime(only 64bit Roms)
Yu Yuphoria
Lenovo a6000/Lenovo a6000 Plus
Moto x play
Hit thanks if you like?

Ok. Thanks very much.

khaikate said:
Ok. Thanks very much.
Click to expand...
Click to collapse
press thanks if liked

I tried on miui 9 redmi 2. But it resulted in flashing one finished twrp. I failed. I tried many times. Please tell me how to fix it.

khaikate said:
I tried on miui 9 redmi 2. But it resulted in flashing one finished twrp. I failed. I tried many times. Please tell me how to fix it.
Click to expand...
Click to collapse
Bro I thinks that rom is 32bit?? as many roms from redmi 2 are 32 bit

Yashraj22 said:
Bro I thinks that rom is 32bit?? as many roms from redmi 2 are 32 bit
Click to expand...
Click to collapse
I tried on 32bit and 64bit. miui8 and even miui9. But failed to boot boot

khaikate said:
I tried on 32bit and 64bit. miui8 and even miui9. But failed to boot boot
Click to expand...
Click to collapse
pm me

Yashraj22 said:
pm me
Click to expand...
Click to collapse
check out i have sent you pm

Tried to port but stuck on TWRP ERROR 7. Anyone knows how to make updater script?

[ROM] LineageOs-v16.0-UNOFFICIAL [P v9.0] for Samsung A5 2016 [A510XX]

Mod Edit : Link Removed.

Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Please report bugs if found any.
Click to expand...
Click to collapse
A small amount of token would be appreciated as an encouragement.
Click to expand...
Click to collapse
Please Hit Thanks if you found this useful. It costs nothing.
Click to expand...
Click to collapse
You can buy me a Coffee at my PayPal, if you found this helpful.
Click to expand...
Click to collapse

Ui is laggy

hi, thanks for this rom, installed on A510F successfully.
ui is a little laggy but the rom is usable everyday

This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy

Hi Bunny,
Congratulations for this first version!
You did a great job.
In fact I have not found any triple crashes, any kind of problems with third-party apps, no spontaneous reboot, no jamming and / or blocking.
Obviously there is still work on the front of the optimization, in fact the UI laggy in practically every sector, consumption is as anomalous (even if they are not bad to be the first version) and the recharge has problems of overheating, in addition to do not indicate if it is a fast or slow charge
I hope you will continue to develop and that every month you will update the security patches, and maybe one day you will also grow into making it a LOS Official (as it was for dotOS).

hi
bunny the rom is very good .but only one request
please add indian volte file ..

On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?

Thanks

rusiu559 said:
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Click to expand...
Click to collapse
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE

When a new build comes out, can I just flash the new build over the old build without wiping everything? (TLDR= Dirty Flash Update/New Build?)

Installed yesterday on french A510F.
No problem until now except in configuration wizard if I choose to configure via data instead of WiFi.
Thank you!
Can't find a way to root in order to restore my Titanium backups, is there a way that works? (I've tried these zip: SuperSu v2.82, addonsu arm 16.0 unofficial, magisk v18.0)

Great man! All the best hope you make it stable soon

This ROM on A710FD?
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
DF11GB said:
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Click to expand...
Click to collapse

darenhoff said:
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
Click to expand...
Click to collapse
Yes, it can be installed on all a710 devices ,and I'm trying to port it for a7108 and a5108. I can tell you how to install it on a710, but can't give you the zip. Because some files are from GitHub. The partitions of a510 and a710 are totally the same, except a5108 and a7108.

Really looks good idea
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
DF11GB said:
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
Click to expand...
Click to collapse

darenhoff said:
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
Click to expand...
Click to collapse
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.

@bunnyy: are you following this
This thread is for A5 devices, so I hope your uploades are for A5 (2016). But somebody saying it can be flashed on A7 (2016).
Is it correct? OR it may brick a7
bunnyy said:
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Click to expand...
Click to collapse

Work ota update ?

DF11GB said:
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
Click to expand...
Click to collapse
You said you installed this on A7 2016 device, does it run smoothly with no problems? Can you share us the step by step procedure? Will it also be installed on my A710Y device?Thanks

[GNU/LINUX][3.4.0.24] Sailfish OS for Samsung Galaxy Tab 2

Disclaimer:
THIS IS NOT ANDROID! Android apps(.apk) do not work here, no Play Store!
Use this at your own risk. I'm not responsible for any problem.
Prerequisites:
Installed TWRP recovery
Downloaded CyanogenMod 13 and SailfishOS zip files from below
The basic linux & android knowledge
Patience
Installation:
Copy downloaded CyanogenMod and SailfishOS zips to device
Reboot to recovery
(of course)Make a nandroid backup
Wipes
Flash CyanogenMod zip
Flash Sailfish OS zip
Reboot (First boot will take long time to show UI, it took around 6 minutes for me)
Downloads:
SailfishOS (espresso3g)
SailfishOS (espressowifi)
CyanogenMod 13 (espresso3g by Andi)
CyanogenMod 13 (espressowifi by Andi)
What Works
Display
Touch
WiFi
Audio/Video
What Doesn't Work
Bluetooth
Terminal app crashes when opened from device, you can use ssh from your computer to access the terminal.
Power Off (we need to power off from twrp)
You tell!
Optional
Get Storeman for more apps. You need to enable in Settings/Developer Tools/Remote Connection. To install download harbour-storeman 0.2.3-1.sfos3_.4.armv7hl.rpm from the link, copy it to the device using ssh (tab should be connected via usb/wifi to the computer) and run
Code:
scp /path/to/downloaded/storeman [email protected]:/home/defaultuser
Password is what is set in Settings/Developer Tools/Remote Connection. Then run
Code:
ssh [email protected]
and in that run
Code:
devel-su pkcon refresh install
devel-su pkcon install-local path-to-storeman-rpm
, same password as in Settings/Developer Tools/Remote Connection. From there you can install more apps! (There is Jolla App Store built in but this has more apps)
Source Code:
mer-hybris https://github.com/mer-hybris
espressowifi device tree https://github.com/MightyM17/android_device_samsung_espressowifi
espresso3g device tree https://github.com/CyanogenMod/android_device_samsung_espresso3g
kernel https://github.com/MightyM17/android_kernel_samsung_espresso10
device
https://github.com/MightyM17/droid-hal-espresso3g
https://github.com/MightyM17/droid-config-espresso3g
https://github.com/MightyM17/droid-hal-version-espresso3g
Sailfish OS Version: 3.4.0.24
ROM Base OS Version: CyanogenMod 13
ROM Kernel: Linux 3.0.101

For espressowifi users facing issue with touch
Fix In SailfishOS
Could you try commenting out a part in a file `sparse/var/lib/environment/compositor/droid-hal-device.conf` that is add # before
QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS="/dev/input/event0:rotate=270"
OR
Fix in twrp
The location of the file in twrp will be in /data/.stowaways, add # before
QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS="/dev/input/event0:rotate=270" in the file `sparse/var/lib/environment/compositor/droid-hal-device.conf

Mithil17 said:
Hey I just ported sfos to the tab 2 using cm13 base!
How's it?
What Works
Display
Touch
WiFi
Mostly everything (Needs to be tested a lot)
What Doesn't Work
Bluetooth
Browser (kinda laggy)
More to be tested!
Click to expand...
Click to collapse
Where’s the link to test?

HippoInWindow said:
Where’s the link to test?
Click to expand...
Click to collapse
Right now i am testing it with @aat56 if all works well will release download link in few days

How does it run, performance wise? It´s my kid´s device and Lineage is a bit laggy on it.

Mithil17 said:
Right now i am testing it with @aat56 if all works well will release download link in few days
Click to expand...
Click to collapse
Okay, waiting patiently. I would like to test a totally new OS other than mainstream custom ROMs.

zackwire said:
How does it run, performance wise? It´s my kid´s device and Lineage is a bit laggy on it.
Click to expand...
Click to collapse
Firstly this isnt Android so dont expect android apps will work otherwise it is pretty smooth, issues i'm facing are browser having touch issues, Bluetooth not working and USB issues, havent tested camera yet bluetooth will be an easy fix i hope. Other things like Jolla Store, Gallery, WiFi etc work. And about Modem (calls/sms/mobile network) i have no way to check as providers have switched to 4G while the tab has 3G

I will try to run some benchmarks if possible

HippoInWindow said:
Okay, waiting patiently. I would like to test a totally new OS other than mainstream custom ROMs.
Click to expand...
Click to collapse
Well i wont be able to work more on it due to time issue. There are some issues like usb,bluetooth etc. do you still want me to release it?

Mithil17 said:
Well i wont be able to work more on it due to time issue. There are some issues like usb,bluetooth etc. do you still want me to release it?
Click to expand...
Click to collapse
Would like to test, since mine is already dedicated to testing

HippoInWindow said:
Would like to test, since mine is already dedicated to testing
Click to expand...
Click to collapse
What device? 7 or 10 inch?

Mithil17 said:
What device? 7 or 10 inch?
Click to expand...
Click to collapse
10 inch (espressowifi). Is the build unified?

HippoInWindow said:
10 inch (espressowifi). Is the build unified?
Click to expand...
Click to collapse
I don't know xD, I have built for espresso3g and espressowifi but both were 7 inch models

Mithil17 said:
I don't know xD, I have built for espresso3g and espressowifi but both were 7 inch models
Click to expand...
Click to collapse
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD

HippoInWindow said:
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
Click to expand...
Click to collapse
Well it's at your own risk! This is actually my 1st ever port so I'm very nervous

HippoInWindow said:
Can tell, but not sure how it will work, I can test for you and I will make sure to backup my current ROM (CyanogenMod 9, for nostalgia) before testing, hope this doesn’t brick my recovery XD
Click to expand...
Click to collapse
It didnt brick recovery in mine plus i kinda actually like it (only issue being no android app support)

Want me to upload?

Oh wow! you actually made a new ROM for the samsung galaxy tab 2! I am definitely gone help out by installing this and mentioning any bugs I find! Also I can't wait to see newer android versions!

KappaTheCapper said:
Oh wow! you actually made a new ROM for the samsung galaxy tab 2! I am definitely gone help out by installing this and mentioning any bugs I find! Also I can't wait to see newer android versions!
Click to expand...
Click to collapse
Newer android versions, I tried building Oreo but without success
Also this isn't android it's sailfish os

Mithil17 said:
Newer android versions, I tried building Oreo but without success
Also this isn't android it's sailfish os
Click to expand...
Click to collapse
That is linux reminding everyone.
Final build will have bluetooth intergrated?

General Spark os

Spark Os
Sharing this awesome rom!
2.45 GB file on MEGA
mega.nz
-— Flashing Instructions ---
* download zip and place in same folder in fastboot.exe
* open command prompt inside same folder
* reboot phone to bootloader (adb reboot bootloader)
* fastboot -w (optional)
* fastboot update <rom.zip>

Thanks for sharing this Rom, Is it necessary to patch init.bot.img with this rom or is it already done? I saw in Pixelflasher app that you can flash a custom rom from the app, but I need to know if you have to patch the file.

Bestiole222 said:
Thanks for sharing this Rom, Is it necessary to patch init.bot.img with this rom or is it already done? I saw in Pixelflasher app that you can flash a custom rom from the app, but I need to know if you have to patch the file.
Click to expand...
Click to collapse
Read the instructions, just follow them.
Love this rom, battery is insane on wifi

thanks for sharing this amazing rom!
It would be cool to have Kirisakura kernel built in and 32 bits apps support and face id too!

I got an unlocked pixel 7 pro just for the sake of custom Roms. I like having more freedom. That's all. Not being tied to just stock.

flyinglotus said:
thanks for sharing this amazing rom!
It would be cool to have Kirisakura kernel built in and 32 bits apps support and face id too!
Click to expand...
Click to collapse
Dumb question: But is that possible ? To have 32 bits app support? I thought it was a hardware limitation

antonio_d25 said:
Dumb question: But is that possible ? To have 32 bits app support? I thought it was a hardware limitation
Click to expand...
Click to collapse
It's not a hardware limitation, it's purely software. Google stripped the 32-bit libraries from the ROM.

BTW, there's a thread for this ROM over in the Pixel 7 Pro section:
SparkOS 13.2 | Android 13 | [UNOFFICIAL] - [11/29/2022]
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance. In short a fully functional operating system as stable and customizable as it should be. /* Your warranty is now void. * * I am not...
forum.xda-developers.com

When I attempt to flash, it says the bootloader version cloudripper-1.0-9231809 is outdated and will only work if updated to cloudripper-1.0-9231810. I've tried searching all over and can't find out where to download it.

EtherealRemnant said:
It's not a hardware limitation, it's purely software. Google stripped the 32-bit libraries from the ROM.
Click to expand...
Click to collapse
Gotcha, thanks. Been looking but I haven't been able to find any ROMs or Kernels that offer 32-bit app support. Hopefully there will be one in the future

antonio_d25 said:
Gotcha, thanks. Been looking but I haven't been able to find any ROMs or Kernels that offer 32-bit app support. Hopefully there will be one in the future
Click to expand...
Click to collapse
Cherish OS, DerpFest or Corvus OS litteraly support 32 bits apps

flyinglotus said:
Cherish OS, DerpFest or Corvus OS litteraly support 32 bits apps
Click to expand...
Click to collapse
thanks !!! I will check them out

I also have the issue with:
When I attempt to flash, it says the bootloader version cloudripper-1.0-9231809 is outdated and will only work if updated to cloudripper-1.0-9231810.
Any help would be greatly appreciated.
Thanks!

For anyone interested, the newest version is RC1 for the Pixel 7.
Located here:
2.45 GB file on MEGA
mega.nz

Thanks for the update. I no longer have the cloudripper problem just a boot loop problem. Starts the booting process (the Spark animation starts) then it just goes black and reboots. I tried changing the active slots but that did not work. This is a brand new Pixel 7 phone. There are no issues loading google's stock rom. Any help or suggestions would be appreciated.
Thanks

Jack Swartz said:
Thanks for the update. I no longer have the cloudripper problem just a boot loop problem. Starts the booting process (the Spark animation starts) then it just goes black and reboots. I tried changing the active slots but that did not work. This is a brand new Pixel 7 phone. There are no issues loading google's stock rom. Any help or suggestions would be appreciated.
Thanks
Click to expand...
Click to collapse
Could be a bad download. Try download again, and perform same setup instructions.

Jack Swartz said:
Thanks for the update. I no longer have the cloudripper problem just a boot loop problem. Starts the booting process (the Spark animation starts) then it just goes black and reboots. I tried changing the active slots but that did not work. This is a brand new Pixel 7 phone. There are no issues loading google's stock rom. Any help or suggestions would be appreciated.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it's because you're on the December update. Spark hasn't been updated for the December update just yet, it's still on the November update.

Misuto said:
I'm pretty sure it's because you're on the December update. Spark hasn't been updated for the December update just yet, it's still on the November update.
Click to expand...
Click to collapse
Thanks for the help. That did the trick!

I have a test build of bliss for pixel 7 (panther). If anybody is interested in testing. I built the p7pro rom we have now

omariscal1019 said:
I have a test build of bliss for pixel 7 (panther). If anybody is interested in testing. I built the p7pro rom we have now
Click to expand...
Click to collapse
I would absolutely love any test build you have for the 7. I just don't have the 7 pro.