Database Develop

[ROM] Oxygen OS 3.2.5 untouched system.img + boot.img (twrp + fastboot)

If someone wants to make mirrors or a flashable zip, feel free to contact me and I will update thread
I've got my new OP3 today and what I've noticed that it runs with Oxygen OS 3.2.5. So I have looked around and saw that nobody backed up their 3.2.5 und uploaded it so I decided to do it.
Here is the download link: https://mega.nz/#!PJhzRDyL!wX12zmq9ptiu8gNbtfQfypB2Q6wGdu3IfNFFwi9acQk
The only requirement is an unlocked bootloader as fastboot doesn't allow to flash on locked devices
How to install:
via twrp:
- boot into twrp recovery
- press "install"
- press "install image" on the bottom right
- select the image and confirm on which partition it should flash
(not recommended) via fastboot:
- boot into fastboot
- use these commands to flash it:
ignore the little warning message and pe patient because it can take a while till you get a response from cmd because fastboot splits the image into 6 parts
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Note: if your phone isn't booting, flash supersu and it should boot.
screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Fastboot flashing is not working.

Can you comment on the LTE reception and performance? It was the only issue i had with 3.2.4

Anyone tried looks tempting
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

TWRP is working, fastboot not.
Im on 3.2.5 now so yes its working, but only with TWRP

*Extracted fine with newest winrar*
Error on my end, sorry, thank you!

Chronzy said:
@hellcat50 zip is corrupt, "unexpected end of archive" when I tried to extract the img's. Downloaded it twice. Don't recommend wiping and trying to install at this time.
Would love to have this though, would you mind repacking?
---------- Post added at 12:19 PM ---------- Previous post was at 12:18 PM ----------
you were able to extract the imgs? I downloaded it twice and got corrupt zip both times.
Click to expand...
Click to collapse
It did extract without any issues on my end.
I downloaded and extracted the file on my PC with the latest winrar.
EDIT:
Worked as described in the first post.
I flashed both files, followed by the latest SuperSU 2.78 and Xposed,
then did a reboot.
All works well!

So, I will not lose my data, right?

No, but you should still do a backup in TWRP.

AcmE85 said:
No, but you should still do a backup in TWRP.
Click to expand...
Click to collapse
Sorry, but I haven't installed TWRP. I'm completely on stock (system and recovery)

Andrea224 said:
Sorry, but I haven't installed TWRP. I'm completely on stock (system and recovery)
Click to expand...
Click to collapse
Then there is probably no way to install this to your device, as a user already said that using fastboot does not work.
I also think that your bootloader should be unlocked for this to work.

AcmE85 said:
Then there is probably no way to install this to your device, as a user already said that using fastboot does not work.
I also think that your bootloader should be unlocked for this to work.
Click to expand...
Click to collapse
Mmh...ok, thanks anyway.

So basically you should have unlocked bootloader, supersued, and TWRP'ed

Reconfigured said:
So basically you should have unlocked bootloader, supersued, and TWRP'ed
Click to expand...
Click to collapse
SuperSU is not needed, why should it be? With this you overwrite the whole System partition, thus removing all mods including SuperSU and Xposed.

waiting for someone to confirm the LTE issue resolution.. if it's resolved, I'll flash this ASAP..

AcmE85 said:
EDIT:
Worked as described in the first post.
I flashed both files, followed by the latest SuperSU 2.78 and Xposed,
then did a reboot.
All works well!
Click to expand...
Click to collapse
Pick your brain for a moment if you don't mind...
Still having issues with both methods... in TWRP, at the install image screen i'm only getting boot and recovery partition options, supposed to have system too right?
Fastboot it hangs for a moment at an error of something about invalid sparsing but continues to flash, apparently successfully, but when i reboot system it just boots back to recovery.

Chronzy said:
Pick your brain for a moment if you don't mind...
Click to expand...
Click to collapse
I am using this recovery
http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
After switching to image install, I simply picked the system.img and was able to pick between system, boot and recovery.
Repeated for boot.img as boot...

AcmE85 said:
I am using this recovery
http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
After switching to image install, I simply picked the system.img and was able to pick between system, boot and recovery.
Repeated for boot.img as boot...
Click to expand...
Click to collapse
Can we directly flash it over 3.2.4 in twrp ?

Any differences with the previous version guys?3.2.4....Tnx!!

AcmE85 said:
I am using this recovery
http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
After switching to image install, I simply picked the system.img and was able to pick between system, boot and recovery.
Repeated for boot.img as boot...
Click to expand...
Click to collapse
I was on an older recovery, should have known... that did it, Thanks! :good:

[TOOL][OP5] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)

This is the OnePlus 5's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​

Thaaaanks but has anyone rooted there op5 with this yet? Does it actually work? Probably does but just would like to make 110% sure

icem8n said:
Thaaaanks but has anyone rooted there op5 with this yet? Does it actually work? Probably does but just would like to make 110% sure
Click to expand...
Click to collapse
This tool cant directly root your phone, but it can unlock your bootloader and help you to flash a twrp. If you want to root your phone you can flash twrp and then flash the root zip through twrp

Bootloader successfully unlocked
I´ve also flashed this Chinese TWRP with your tool due to my eagerness
and finally rooted with Magisk
@mauronofrio your efforts are really appreciated

Deacon-Frost said:
Bootloader successfully unlocked
Click to expand...
Click to collapse
Perfect:good:

Awesome looking tool. I'll be downloading and donating as soon as I get my OP5 on Monday.
I plan on running stock software for awhile but can I simply unlock, flash TWRP, and flash the same SuperSU I always use for custom ROMs?

biglilsteve said:
Awesome looking tool. I'll be downloading and donating as soon as I get my OP5 on Monday.
I plan on running stock software for awhile but can I simply unlock, flash TWRP, and flash the same SuperSU I always use for custom ROMs?
Click to expand...
Click to collapse
Yes, i don't know if there are a supersu specific version must be flashed, but yes, unlock the bootloader, flash the twrp and then flash supersu or magisk. I don't know if you need to disable dm-verity before reboot but i think yes

was impatient... and got everything working... unlocked, TWRP recovery, and then Magisk rooted. woot woot.!!
now hopefully there is a working xposed

AznMTboy said:
was impatient... and got everything working... unlocked, TWRP recovery, and then Magisk rooted. woot woot.!!
now hopefully there is a working xposed
Click to expand...
Click to collapse
Perfect:good:
Made a backup before flash xposed

perfect！thank you！

Which version of magisk 13 you use?
Gesendet von meinem Nexus 6P mit Tapatalk

cant install twrp
i cant install twrp and also cant root the phone, some one can help me? i try all i can to get it work....
this is what i get always..

hounter17 said:
i cant install twrp and also cant root the phone, some one can help me? i try all i can to get it work....
this is what i get always..
View attachment 4192075 View attachment 4192076
Click to expand...
Click to collapse
When you flash the twrp select the options "And boot it" and you will rebooted directly to the twrp, someone say that the TWRP survive for only 1 reboot
Craxx said:
Which version of magisk 13 you use?
Gesendet von meinem Nexus 6P mit Tapatalk
Click to expand...
Click to collapse
I have not tested it, i think the last should work

mauronofrio said:
When you flash the twrp select the options "And boot it" and you will rebooted directly to the twrp, someone say that the TWRP survive for only 1 reboot
the problem is that i can get it flashed
Click to expand...
Click to collapse

hounter17 said:
mauronofrio said:
When you flash the twrp select the options "And boot it" and you will rebooted directly to the twrp, someone say that the TWRP survive for only 1 reboot
the problem is that i can get it flashed
Click to expand...
Click to collapse
You are the first until now. To flash the twrp you need to have an internet connection, because the tool before download the recovery and then flash it. If you have made all of this try to delete the downloaded recovery and flash it again (maybe the download has failed). To delete the downloaded recovery you need to go in the advanced options and use the "Delete Files" (top right of the page) button to delete what you want (in this case you need only to delete TWRP recoveries). Tell me if you solve
Click to expand...
Click to collapse

Someone said that TWRP will only survive for one reboot. I've flashed yesterday that Chinese TWRP and rooted with Magisk. My experience is that TWRP will stay. I've booted today three times into TWRP. Everything seems to be as normal as it should be.

Deacon-Frost said:
Someone said that TWRP will only survive for one reboot. I've flashed yesterday that Chinese TWRP and rooted with Magisk. My experience is that TWRP will stay. I've booted today three times into TWRP. Everything seems to be as normal as it should be.
Click to expand...
Click to collapse
Perfect so the problem is another one. When the twrp is booted for the first time it automatically delete or hide the stock recovery so if you flash the twrp and you boot directly from fastboot to twrp, the twrp will survive but if you flash the twrp and power one normally the phone the stock recovery will be restored. So when you flash the twrp, directly boot in it, from the tool you need to check "And boot it" option to boot it directly after flash.

mauronofrio said:
hounter17 said:
You are the first until now. To flash the twrp you need to have an internet connection, because the tool before download the recovery and then flash it. If you have made all of this try to delete the downloaded recovery and flash it again (maybe the download has failed). To delete the downloaded recovery you need to go in the advanced options and use the "Delete Files" (top right of the page) button to delete what you want (in this case you need only to delete TWRP recoveries). Tell me if you solve
Click to expand...
Click to collapse
i try all and it tucks here:
View attachment 4192182
Click to expand...
Click to collapse

hounter17 said:
mauronofrio said:
i try all and it tucks here:
View attachment 4192182
Click to expand...
Click to collapse
i'm unable to load this image and please be more specific, when you got this problem?
Click to expand...
Click to collapse

mauronofrio said:
hounter17 said:
i'm unable to load this image and please be more specific, when you got this problem
Click to expand...
Click to collapse
im sorry about the troubles... i unlock the bootloader i enable usb debuging and i reboot it in fastboot mode. them i use the tool to flash the recovery but when the cmd screen gets on it stucks and doesnt finish the process...
i dont know what to do in this point
i also see that in fastboot mode screen appear that the product name was "QC_reference_phone" and the bootloader and the baseband brands are empty.
the device state was "unlocked"
Click to expand...
Click to collapse

help rooting device with oreo 8.1

Hello,
I have this phone (infinix note 4 x572) running oreo 8.1 , build number :X572-H5312CE-O-180531V117
I wish to root it but after a while of searching i'm overly confused and frustrated..
can you please guide me through rooting it?
thanks alot

btw, does local update help in any way ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

All the info and installation instructions you need can be found in the release thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
And if you encounter problems along the way, take a look at the troubleshooting guide.
https://www.didgeridoohan.com/magisk/Magisk
If you have further questions after that, make sure to be specific about what you need help with. "Guide me through it" is a bit too general and is already covered in the links above.

Didgeridoohan said:
All the info and installation instructions you need can be found in the release thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
And if you encounter problems along the way, take a look at the troubleshooting guide.
https://www.didgeridoohan.com/magisk/Magisk
If you have further questions after that, make sure to be specific about what you need help with. "Guide me through it" is a bit too general and is already covered in the links above.
Click to expand...
Click to collapse
thanks, the first prerequisite is the stock boot.img,, i tried backing it up using miracle box but encountered the 'unstable port' problem, what other possible ways i could extract the boot.img from my phone ?

and btw, i remember asking a guy somewhere and he told me that magisk won't root my device, is that true considering it's a less-known manufacturer ?

yazansayed said:
thanks, the first prerequisite is the stock boot.img,, i tried backing it up using miracle box but encountered the 'unstable port' problem, what other possible ways i could extract the boot.img from my phone ?
Click to expand...
Click to collapse
I'd try the TWRP route instead. I found this thread after about 2 minutes of searching on XDA (search words "infinix note 4 x572"):
https://forum.xda-developers.com/android/general/infinix-one-support-root-twrp-firmware-t3695803
It's a really good idea to use the XDA search, because it often works quite good.
If you want to keep the stock recovery on your device, you can actually just boot the TWRP image instead of flashing it. In that case, the command used in that thread:
Code:
fastboot flash recovery recovery.img
should be changed to:
Code:
fastboot boot recovery recovery.img
If that doesn't work, you can actually make quite easily make a backup of your boot image in TWRP and then patch that file in the Manager, to see if that works better.
If things don't work out in TWRP, make sure to provide the recovery log.
---------- Post added at 20:35 ---------- Previous post was at 20:32 ----------
yazansayed said:
and btw, i remember asking a guy somewhere and he told me that magisk won't root my device, is that true considering it's a less-known manufacturer ?
Click to expand...
Click to collapse
It's very possible... It depends on how stock the Manufacturer has kept Android on your device, what chipset the device has, and so on...

Didgeridoohan said:
I'd try the TWRP route instead. I found this thread after about 2 minutes of searching on XDA (search words "infinix note 4 x572"):
https://forum.xda-developers.com/android/general/infinix-one-support-root-twrp-firmware-t3695803
It's a really good idea to use the XDA search, because it often works quite good.
If you want to keep the stock recovery on your device, you can actually just boot the TWRP image instead of flashing it. In that case, the command used in that thread:
Code:
fastboot flash recovery recovery.img
should be changed to:
Code:
fastboot boot recovery recovery.img
If that doesn't work, you can actually make quite easily make a backup of your boot image in TWRP and then patch that file in the Manager, to see if that works better.
If things don't work out in TWRP, make sure to provide the recovery log.
---------- Post added at 20:35 ---------- Previous post was at 20:32 ----------
It's very possible... It depends on how stock the Manufacturer has kept Android on your device, what chipset the device has, and so on...
Click to expand...
Click to collapse
thanks alot for the quick responses, i will try it and reply as fast as possible

okay, i downloaded the twrp recovery image for Note 4, flashed it using Fastboot method successfully,
the problem is when i try to boot into the twrp recovery mode, i tried holding the power menu+ vol.down buttons, it sends me into a black screen with "factory mode" upwards in yellow, no button is working.
i then tried
Code:
adb reboot recovery
the phone reboots and says "No command" under a red triangle.
i then tried to flash the twrp img using sp flash tools, and flashed it successfully but the same errors occur, i can't seem to be able to boot into recovery mode.

i looked up for a solution for the "no command" problem, here's one:
I faced the same problem with nexus 6p. It works when you root immediately after flashing the TWRP. Keep the superSU file in the storage. Get into bootloader. Flash TWRP via fastboot. Without restarting anything, just press volume up/down buttons while in the bootloader to select recovery. TWRP will open. Flash the SuperSU.zip. Then restart the system. Next time, if you open recovery, you won't get the "no command". If you don't flash SuperSU and you try to open recovery later, you will get the "No command".
Click to expand...
Click to collapse
what i understood is that i shouldn't reboot my device using "fastboot reboot" , he says i should get into recovery mode directly without restarting, idk how to do that since there are no option for it on the screen, i just have
Code:
=> FASTBOOT mode...
on the screen !

Didgeridoohan said:
It's very possible... It depends on how stock the Manufacturer has kept Android on your device, what chipset the device has, and so on...
Click to expand...
Click to collapse
unfortunately i never used the sp flash tool before, so i tried flashing a stock rom but the device is now dead with "dram failed" error, i'll try fixing this first

It's tricky trying to help with a device you don't have...
Did you manage to boot to recovery? Usually you use the volume buttons to select the options and then the power button to confirm. You could also just use the fastboot boot option command I wrote earlier. It'll boot straight into TWRP.
There are a few threads for your device around, so if you need help specific to your device, that's the place to go...

everything is fine now,, fixed the device by flashing a rom named (X572-H5312CE-O-180203V55) then used magisk app to patch the included boot.img, flashed the patched boot.img using sp flash tool,, and everything is working fine now,,,
thanks alot

the twrp from the post you provided is for an older firmware, this is why i couldn't get into recovery after i flashed the provided twrp img,, there is no available twrp for the oreo version of the firmware, but i requested one from twrp builder project,, thanks alot, i've learnt alot in the last 24 hours

yazansayed said:
everything is fine now,, fixed the device by flashing a rom named (X572-H5312CE-O-180203V55) then used magisk app to patch the included boot.img, flashed the patched boot.img using sp flash tool,, and everything is working fine now,,,
thanks alot
Click to expand...
Click to collapse
could you upload the boot.img pls (the stock and the patched if possible )

Lenovo Z5s Update to ZUI 11.5 (Android 10)

Disclaimer: No guarantees. Follow at your own risk. I am not responsible for bricked phones.
Credits to 4PDA
Prerequisites:
Knowledge of OEM unlocking from Developer options, adb, and fastboot
Knowledge of QPST in case you encounter bootloop, so you can revert to a reliable stock ROM
Unlocked bootloader (from here)
1) Get your bootloader unlocked, if you haven't already.
- Visit https://www.zui.com/iunlock
- Enter the IMEI1 (Second number when you call *#06# with the phone)
- Enter the Device ID from the Bootloader/Fastboot (Hold VOL- and Power, while device is off)
- Enter your email and captcha and set the checkmark to acknowledge voiding your warranty.
- If you get an error saying that your IMEI1 is wrong, put in a sim card and wait a few hours. If it still doesn't work, write an email to [email protected]
- In the developer settings in android, enable usb debugging and oem unlock.
- Flash the sn.img file you receive with fastboot (again, hold vol- and power while the device is off). Command is 'fastboot flash unlock sn.img'. You need compatible usb drivers, qualcom drivers and adb/fastboot to do that. Use google or write me a PM if you have trouble with that.
- execute 'fastboot oem unlock-go'
- This allows you to use fastboot to flash custom system/boot/vendor/vbmeta images
Click to expand...
Click to collapse
@wzsx150's recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img MEGA Google Drive
@wzsx150's TWRP for Android 10 TWRP-3.3.2B-0508-LENOVO_Z5S-10.0-CN-wzsx150-fastboot.7z (extract the IMG file and flash using fastboot)
3) Now you can flash TWRP.
- Download ...
- Flash it from the Bootloader with 'fastboot flash recovery recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img'
- Press VOL UP / VOL DOWN to navigate to recovery.
Click to expand...
Click to collapse
11.3.169: L78071_11.3.169_DEV_FullOTA.zip
11.5.096 Update: ZUI_11.3.169_DEV_TO_ZUI_11.5.096_ST.zip
11.5.111 Update: ZUI_11.5.096_TO_ZUI_11.5.111_ST.zip
Other files, use at your own risk
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Official TWRP for jd2019
In recovery, Format data, then wipe Dalvik/ART Cache, Cache, Data
Reboot to recovery
Install in order, without rebooting, 11.3.169 -> 11.5.096 Update -> 11.5.111 Update.
Install Magisk 20.4
Install TWRP for Android 10 (above) using fastboot if the update replaces stock recovery after rebooting
Edited out from original
Wipe Data and flash Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
In order not to encrypt Data in the future, install Official TWRP immediately after installing updates. Install > Install Image > twrp-3.3.1-0-jd2019.img
Install GApps
Note: I do not know if the 11.5 update relocks the bootloader. It doesn't lock the bootloader.
I had bootloop from OpenGApps. 4PDA post advises to use BiTGApps. You can install Google Play Store from the built-in Lenovo App Center and that's what I did.
Haven't tried disabling dm-verity and forceencrypt.

Good job, my man, I'll check it out tonight and prepare ourselves an updateable package for people coming from any rom to avoid the hassle of going through all of that. As soon as I get it working will release a new TWRP for Android 10.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlshark said:
View attachment 5036881
Click to expand...
Click to collapse
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier

jacoghi said:
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
Click to expand...
Click to collapse
I've been using the phone on 11.5.111 for a couple of days now.
I flashed both the 3.3.2 TWRP of @wzsx150 and the official TWRP and they seem to be working. I didn't turn off encryption so it seems to work well.
Happy to have helped in a small way. Thank you for your hard work!

links not works

vesdan said:
links not works
Click to expand...
Click to collapse
Thanks for the heads up, apparently the original poster removed the links. Will be uploading the ones I used.
Reuploading done.

Thank you very much

Thanks for the rom my friend.
Can you please upload the latest update cause i am rooted and it cannot be installed via the system.
Also guys ,does anyone knows if i can put the latest android 10 with multilanguage rom ?Thank you for everything ,i appreciate.

thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number

sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?

galardo_2 said:
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
Click to expand...
Click to collapse
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!

vesdan said:
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
Click to expand...
Click to collapse
but the qpst app need an aditional content.xml file, where can i get one

Install global via fastboot, all is included or in qfil ROM is all in zip file

vesdan said:
Install global via fastboot, all is included or in qfil ROM is all in zip file
Click to expand...
Click to collapse
I tried and failed again

i tired and failed again

galardo_2 said:
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
Click to expand...
Click to collapse
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably

carlshark said:
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
Click to expand...
Click to collapse
after a few atempts (3-4 days) the imei number got accepted, but now i have another problem as you can see, i flashed the gapps and now i have the bootloop and i dont have a clue how to undone it

hello friends I have all the updates installed, but it tells me that there is a new one, where can I download it?
On the other hand, what difference is there between installing by twrp and qfill?

galardo_2 said:
i tired and failed again
Click to expand...
Click to collapse
This is problem with program, drivers sahara. Try fastboot

Need some help rooting my one plus 6t

Hey peeps,
Its been about a 7-8 years since i last tinkered with an android phone so im totally out the loop.
My one plus 6t recently went up in flames due to the latest update and I had to wipe it.
I've been wanting to root my phone and potentially install an alternate android rom as i've lost all my confidence in one plus.
I've managed to unlock the bootloader but i'm stuck with twrp and magisk.
Everytime I run twrp in the boot loader I get a qualcomm crash dump, I was told this was due to my phone being one android 11.
Totally lost right now so i little direction would be totally appreciated.
Thanks.

You need flash stable.img from here https://forum.xda-developers.com/t/...os11-open-beta-2-3-and-stable-latest.4316563/

iggyx2 said:
You need flash stable.img from here https://forum.xda-developers.com/t/...os11-open-beta-2-3-and-stable-latest.4316563/
Click to expand...
Click to collapse
I'm running Pixel Experience A11. How do i root this ROM? Flashing them img's made my phone bootloop recovery?

Clarkiieh said:
I'm running Pixel Experience A11. How do i root this ROM? Flashing them img's made my phone bootloop recovery?
Click to expand...
Click to collapse
I'm not running custom rom on my OP6t or OP6 so I can't confirm what img works.
That being said, if you're running custom ROM on your OP6t try this one https://forum.xda-developers.com/t/...recovery-project-v3-1-0.4198277/post-85713789

iggyx2 said:
You need flash stable.img from here https://forum.xda-developers.com/t/...os11-open-beta-2-3-and-stable-latest.4316563/
Click to expand...
Click to collapse
Thanks for the reply,
so in the guide I was following it says to 'fastboot boot (image file name).img' through adb in the bootloader would I do the same with the stable image you suggested?

abenfares said:
Hey peeps,
Its been about a 7-8 years since i last tinkered with an android phone so im totally out the loop.
My one plus 6t recently went up in flames due to the latest update and I had to wipe it.
I've been wanting to root my phone and potentially install an alternate android rom as i've lost all my confidence in one plus.
I've managed to unlock the bootloader but i'm stuck with twrp and magisk.
Everytime I run twrp in the boot loader I get a qualcomm crash dump, I was told this was due to my phone being one android 11.
Totally lost right now so i little direction would be totally appreciated.
Thanks.
Click to expand...
Click to collapse
Are you still stuck in Qualcomm crash dump?? Or what?

s.seila said:
Are you still stuck in Qualcomm crash dump?? Or what?
Click to expand...
Click to collapse
No I got out of that and it’s booting fine but I’m still trying to root my device

abenfares said:
No I got out of that and it’s booting fine but I’m still trying to root my device
Click to expand...
Click to collapse
Then try to flash magisk patched image.

Clarkiieh said:
I'm running Pixel Experience A11. How do i root this ROM? Flashing them img's made my phone bootloop recovery?
Click to expand...
Click to collapse
Flash the magisk zip through twrp.

s.seila said:
Flash the magisk zip through twrp.
Click to expand...
Click to collapse
so i would just do fastboot flash stable.img ( that being the file the other user suggested?

abenfares said:
so i would just do fastboot flash stable.img ( that being the file the other user suggested?
Click to expand...
Click to collapse
Did you already flash Stable.img and are you on Oxygen 11 or Oxygen 11.1.1.1.1?

iggyx2 said:
Did you already flash Stable.img and are you on Oxygen 11 or Oxygen 11.1.1.1.1?
Click to expand...
Click to collapse
I haven't flashed anything i'm still on stock, i literally just unlocked the bootloader.

abenfares said:
I haven't flashed anything i'm still on stock, i literally just unlocked the bootloader.
Click to expand...
Click to collapse
I see.. Don't flash Stable.img if you're on Oxygen 11.1.1.1 you would need 11.1.1.1 magisk patched img as @s.seila said but if you're on Oxygen 11 then use Stable.img.

iggyx2 said:
I see.. Don't flash Stable.img if you're on Oxygen 11.1.1.1 you would need 11.1.1.1 magisk patched img as @s.seila said but if you're on Oxygen 11 then use Stable.img.
Click to expand...
Click to collapse
So I flashed the magisk patched img and now its boot looping, I get to the screen that says the boot loader is unlocked and it loops back to the android splash screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This was the command i used to flash btw.

abenfares said:
So I flashed the magisk patched img and now its boot looping, I get to the screen that says the boot loader is unlocked and it loops back to the android splash screen.
View attachment 5439489
This was the command i used to flash btw.
Click to expand...
Click to collapse
What version are you on 11 or 11.1.1.1. its maybe because you flash wrong image that why it lead you into bootloop.
Tell me the version I'll help you.

s.seila said:
What version are you on 11 or 11.1.1.1. its maybe because you flash wrong image that why it lead you into bootloop.
Tell me the version I'll help you.
Click to expand...
Click to collapse
it was 11.1.1.1

abenfares said:
it was 11.1.1.1
Click to expand...
Click to collapse
if you still stuck in bootloop, flash boot.img and then reboot phone.
Root..
flash magisk_patched_v11.1.img in fastboot mode.
Code:
fastboot flash boot magisk_patched_v11.1.img
follow here Link if you want detail instruction.

s.seila said:
if you still stuck in bootloop, flash boot.img and then reboot phone.
Root..
flash magisk_patched_v11.1.img in fastboot mode.
Code:
fastboot flash boot magisk_patched_v11.1.img
follow here Link if you want detail instruction.
Click to expand...
Click to collapse
Thanks worked like a charm thanks, you're a legend.