GSI flashing on k20 pro - Redmi K20 Pro / Xiaomi Mi 9T Pro Questions & Answe

Can someone give me a process on how can i boot gsi images on my k20 pro.
Any gsi images..

Do you already know?

Dimasik137 said:
Do you already know?
Click to expand...
Click to collapse
nope i tried some gsi with fcrypt disabler but they didn't boot so just left trying.

Ezio553 said:
nope i tried some gsi with fcrypt disabler but they didn't boot so just left trying.
Click to expand...
Click to collapse
Same thing, i tried to install Flyme

Dimasik137 said:
Same thing, i tried to install Flyme
Click to expand...
Click to collapse
Yeah now i don't know but there should be some modifications needed to boot gsi on this phone or maybe an older vendor might be required i am not sure but i have never tried booting gsi with miui vendors only v12 vendors and oss vendor probably will never boot any gsi directly

you need android 11 vendor from MIUI 12.5. Android 10 vendor are borked that you can't use it for booting GSI ROMs. Just download MIUI 12.5 recovery ROM and delete everything except vendor.

Kursem said:
you need android 11 vendor from MIUI 12.5. Android 10 vendor are borked that you can't use it for booting GSI ROMs. Just download MIUI 12.5 recovery ROM and delete everything except vendor.
Click to expand...
Click to collapse
Ok so that means i can even use eu roms vendor to boot gsis .

Ezio553 said:
Ok so that means i can even use eu roms vendor to boot gsis .
Click to expand...
Click to collapse
yep, as long as it's based on Android 11

Kursem said:
yep, as long as it's based on Android 11
Click to expand...
Click to collapse
Ok i will test out this.

Related

Android P Treble GSI

Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk
PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?
Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?
PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?
_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality
jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me
marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )

Fingerprint don't work after replace display and it's rebooted

Hi
I replaced my 9t pro's display but when I want set fingerprint it's suddenly rebooted!!!
I have the same issue, searched over the internet for two days but haven't got the solution except using MIUI 11
mrcandy108 said:
I have the same issue, searched over the internet for two days but haven't got the solution except using MIUI 11
Click to expand...
Click to collapse
With miui 11 you haven't any problem with fingerprint?
vhahoora said:
With miui 11 you haven't any problem with fingerprint?
Click to expand...
Click to collapse
Yup, i am using EvoX with vendor miui 11 and fingerprint works fine
mrcandy108 said:
Yup, i am using EvoX with vendor miui 11 and fingerprint works fine
Click to expand...
Click to collapse
which version of Evo X did you install ?? and what is the procedure to install the vendor of miui 11? I'm running Evo X but without a fingerprint on vendor miui 12
(forgive me for bad english)
renanpanzarini said:
which version of Evo X did you install ?? and what is the procedure to install the vendor of miui 11? I'm running Evo X but without a fingerprint on vendor miui 12
(forgive me for bad english)
Click to expand...
Click to collapse
I edited file update-script to skip checking version of current installed vendor. So that i can flash EvoX without installing MIUI12 vendor.
I have been living with this issue for quite sometime now. Tried various things. I found out that newer Miui 12 roms fp will not work. Some dont even boot for me. Im using aosp roms though. But they also have problems like oss vendor roms fingerprint only work on high brightness and newer miui 12 vendors will have problem in fp even in aosp roms as well. I have got 12.0.0.9 vendor working for my device which is an Indian variant. So what i do is first flash latest rom+vendor and then after that i flash this 12.0.0.9 vendor on top of it and the fp works flawlessly.
mrcandy108 said:
I edited file update-script to skip checking version of current installed vendor. So that i can flash EvoX without installing MIUI12 vendor.
Click to expand...
Click to collapse
Is everything working without limitations?
Would you like to do a tutorial of the procedure?
renanpanzarini said:
Is everything working without limitations?
Would you like to do a tutorial of the procedure?
Click to expand...
Click to collapse
Simpliest way is
1. Usinf custom recovery to install miui 11 vendor then back up vendor partition.
2. Install EvoX with miui12 vendor
3. Restore backed up vendor that you made in step 1
4. Boot to system, create password and register fingerprint
mrcandy108 said:
Simpliest way is
1. Usinf custom recovery to install miui 11 vendor then back up vendor partition.
2. Install EvoX with miui12 vendor
3. Restore backed up vendor that you made in step 1
4. Boot to system, create password and register fingerprint
Click to expand...
Click to collapse
Friend, it didn't work for me. I followed all the steps, but at boot time the phone goes back to TWRP and does not start
Anirudh44 said:
I have been living with this issue for quite sometime now. Tried various things. I found out that newer Miui 12 roms fp will not work. Some dont even boot for me. Im using aosp roms though. But they also have problems like oss vendor roms fingerprint only work on high brightness and newer miui 12 vendors will have problem in fp even in aosp roms as well. I have got 12.0.0.9 vendor working for my device which is an Indian variant. So what i do is first flash latest rom+vendor and then after that i flash this 12.0.0.9 vendor on top of it and the fp works flawlessly.
Click to expand...
Click to collapse
link vendor indian please ?
mrcandy108 said:
Yup, i am using EvoX with vendor miui 11 and fingerprint works fine
Click to expand...
Click to collapse
What about Oss vendor?
IoIam said:
What about Oss vendor?
Click to expand...
Click to collapse
Just flash rom Corvus came with OSS vendor, nothing happens when i press fingerprint icon on the screen.
mrcandy108 said:
Yup, i am using EvoX with vendor miui 11 and fingerprint works fine
Click to expand...
Click to collapse
Same problem but fixed using the 10.0.6.0 vendor and the latest EvoX too. Thanks for the tip!
Draknodd said:
Same problem but fixed using the 10.0.6.0 vendor and the latest EvoX too. Thanks for the tip!
Click to expand...
Click to collapse
Friend, can you pass the vendor link and the installation procedure used? PLEASE
---------- Post added at 03:02 PM ---------- Previous post was at 02:43 PM ----------
mrcandy108 said:
Yup, i am using EvoX with vendor miui 11 and fingerprint works fine
Click to expand...
Click to collapse
What version of vendor miui 11 is installed?
renanpanzarini said:
Friend, can you pass the vendor link and the installation procedure used? PLEASE
---------- Post added at 03:02 PM ---------- Previous post was at 02:43 PM ----------
What version of vendor miui 11 is installed?
Click to expand...
Click to collapse
Vendor https://downloads.akhilnarang.dev/MIUI/raphael/
Edit the update-script in the rom you want to install. The path is ROM.zip\META-INF\com\google\android
Delete the lines where there is the vendor check (they are at the beginning of the file)
Flash vendor.
Flash rom
Draknodd said:
Vendor https://downloads.akhilnarang.dev/MIUI/raphael/
Edit the update-script in the rom you want to install. The path is ROM.zip\META-INF\com\google\android
Delete the lines where there is the vendor check (they are at the beginning of the file)
Flash vendor.
Flash rom
Click to expand...
Click to collapse
Still no success. I performed all the steps, installed two vendors (V11.0.4 QFKMIXM and V11.0.6 QFKEUXM), the installation was successful, both for the vendor and the rom, but when starting the smarthphone, the boot image (Mi) flashes , and returns to twrp. What can I be doing wrong?
renanpanzarini said:
Friend, can you pass the vendor link and the installation procedure used? PLEASE
---------- Post added at 03:02 PM ---------- Previous post was at 02:43 PM ----------
What version of vendor miui 11 is installed?
Click to expand...
Click to collapse
renanpanzarini said:
Still no success. I performed all the steps, installed two vendors (V11.0.4 QFKMIXM and V11.0.6 QFKEUXM), the installation was successful, both for the vendor and the rom, but when starting the smarthphone, the boot image (Mi) flashes , and returns to twrp. What can I be doing wrong?
Click to expand...
Click to collapse
You must use the correct vendor for your region, not a random one.
Draknodd said:
Vendor https://downloads.akhilnarang.dev/MIUI/raphael/
Edit the update-script in the rom you want to install. The path is ROM.zip\META-INF\com\google\android
Delete the lines where there is the vendor check (they are at the beginning of the file)
Flash vendor.
Flash rom
Click to expand...
Click to collapse
Draknodd said:
You must use the correct vendor for your region, not a random one.
Click to expand...
Click to collapse
My region is Global, with vendor QFKMIXM. Before upgrading to miui 12, the fingerprint sensor worked correctly with version 11.0.4QFKMIXM, however I tested the procedure with all variants on android 10 QFKMIXM, without success.
the digital sensor stopped working with version 12.0.1 QFKMIXM.
renanpanzarini said:
My region is Global, with vendor QFKMIXM. Before upgrading to miui 12, the fingerprint sensor worked correctly with version 11.0.4QFKMIXM, however I tested the procedure with all variants on android 10 QFKMIXM, without success.
the digital sensor stopped working with version 12.0.1 QFKMIXM.
Click to expand...
Click to collapse
Renan pelo nome parece brasileiro
Se for me chama no WhatsApp 16992415123

What is vndklite version in gsi roms?

I have tried system32-arm64-ab(not vndklite) gsi on my device and it boots into fastboot but the vndklite one works.
what exactly is vndklite version and in which device should I use that?
(My device supports VNDK 29.0)
Hey what procedure did you use to flash the GSI? I can't find anything about flashing GSIs on Redmi 9C.
I used lineage os,havoc os etc it works.
Patrick022 said:
I used lineage os,havoc os etc it works.
Click to expand...
Click to collapse
My bad. I thought you were using ported GSIs

Question vendor_hardware_overlay

Does anyone have the vendor hardware overlay for the POCO M3 Pro / Redmi Note 10 5G? It says here you can create your own with linux, but I don't have access to a linux machine myself.
camellian it's fully supported by phhusson gsi. i think vendor overlay is not necessary. but if you want to try the only way is linux. you can install in dual boot on you pc. it's easy
wetito said:
camellian it's fully supported by phhusson gsi. i think vendor overlay is not necessary. but if you want to try the only way is linux. you can install in dual boot on you pc. it's easy
Click to expand...
Click to collapse
That wouldn't solve the problems with the screen brightness, then? If that's the case, it sucks because it's the only thing that doesn't work properly with the rom
has somebody check whether miui 13's vendor fixes the brightness issue?
sucius said:
That wouldn't solve the problems with the screen brightness, then? If that's the case, it sucks because it's the only thing that doesn't work properly with the rom
Click to expand...
Click to collapse
there's a fix to solve this. or wait future updates. or install a11 based gsi
wetito said:
there's a fix to solve this. or wait future updates. or install a11 based gsi
Click to expand...
Click to collapse
I'm currently using the fix but in low light conditions the screen will still go blank sometimes. I'll wait for future updates, then
wetito said:
camellian it's fully supported by phhusson gsi. i think vendor overlay is not necessary. but if you want to try the only way is linux. you can install in dual boot on you pc. it's easy
Click to expand...
Click to collapse
this phone not supported but note 10s
look this: https://github.com/phhusson/vendor_...pie/Xiaomi/RedmiNote10S/res/values/config.xml
The developer will get phuked because they add values for note 10 5g.
wetito said:
camellian it's fully supported by phhusson gsi. i think vendor overlay is not necessary. but if you want to try the only way is linux. you can install in dual boot on you pc. it's easy
Click to expand...
Click to collapse
Brightness bug
wetito said:
there's a fix to solve this. or wait future updates. or install a11 based gsi
Click to expand...
Click to collapse
A11 is bugged too
wetito said:
there's a fix to solve this. or wait future updates. or install a11 based gsi
Click to expand...
Click to collapse
How to fix
https://github.com/iamverycute/brightness_fix
could you add on on your guide for flashing gsi
Does "wake screen for notifications" work for any of you? I'm assuming this is related to brightness bug. The brightness_fix app doesn't seem to fix this at all.

Question Vendor

Do You Have Redmi Note 11 Vendor I Didint Find?
nikoboo said:
Do You Have Redmi Note 11 Vendor I Didint Find?
Click to expand...
Click to collapse
Vendor is inside the super partition, you could find it in the fastboot ROM.
SubwayChamp said:
Vendor is inside the super partition, you could find it in the fastboot ROM.
Click to expand...
Click to collapse
I Download LineageOS 20.0 But Is Have Vendor?
nikoboo said:
I Download LineageOS 20.0 But Is Have Vendor?
Click to expand...
Click to collapse
Some custom ROMs use something called AOSP vendor (LTS), not based on the Xiaomi vendor, while others use from the Xiaomi, I didn't check this ROM, some developers make files apart for every partition (like the Xiaomi.eu recovery ROMs) but some, just integrate them where it has to reside, you can see inside the zip, if it's apart, you may find it, if it's integrated, then you have to decompile it, Linux has good tools to do that.
By the way, for what you need it?

Categories

Resources