Related
I'm with a problem that I consider serious xD
try to update my kernel to the version of voodoo, completed the process I restart the phone constantly and will not let me enter recovery mode ... I can only enter the download mode probe charge but again my rom (I use the 2.3.4) but still is constantly restarting and no longer do
someone tells me how I can revive my phone? : (
estoy con un problema que yo lo considero grave xD
trate de actualizar mi kernel a la version de voodoo, terminado el proceso el celular se me reinicia constantemente y no me deja entrar al modo recovery... solo puedo ingresar al modo download pero ya probe cargarle de nuevo mi rom (uso la 2.3.4) pero igual sigue reiniciandose constantemente y ya no se que hacer
alguien me dice como puedo revivir mi telefono?
there any way to install the recovery mode from the menu download?
hay alguna manera de instalar el recovery mode desde el menu download?
If you were on an AT&T gingerbread ROM, then i would suggest grabbing either boog's kernel or the corn kernel and flashing the kernel via Odin or heimdall. That will give you cwm recovery from download mode.
I have tried everything but still get to restarting the screen AT & T and I still can boot into recovery mode, I can only enter the download mode ...
He explained briefly that's what I did if you can tell me where the problem is: enter the page http://project-voodoo.org/download voodoo and download this file: Eclair: Galaxy S Captivate AT & T (SGH-i897) Voodoo lagfix-only 3.0 update.zip (updated 09/02/2010):
you need to rename it to update.zip, see Installation
after installing on my phone began to restart the phone constantly and after that I could not make it work
someone please help me because I lost my phone: (
ya he intentado de todo pero sigue reiniciandose al llegar a la pantalla de AT&T y sigo sin poder iniciar en el modo recovery, solo puedo ingresar al modo download...
Explico brevemente que fue lo que hice por si puedan decirme donde esta el problema: ingrese a la pagina de voodoo http://project-voodoo.org/download y descargue este archivo: Eclair: Galaxy S Captivate AT&T (SGH-I897) Voodoo lagfix-only 3.0 Update.zip (updated 2010-09-02):
you need to rename it to update.zip, see Installation
despues de instalar en mi telefono el telefono empezo a reiniciarse constantemente y luego de eso ya no pude hacerlo funcionar
alguien me puede ayudar por favor porque no quiero perder a mi telefono
reading in various parts of my encounter that perhaps the bootloop ... how I can solve a bootloop if I can not access the recovery menu? as I said earlier, only I can access the download menu
leyendo en varias partes encuentro que lo mio tal vez sea el bootloop... como puedo solucionar un bootloop si no puedo acceder al menu recovery? como dije al principio, solo en el menu download puedo acceder
You'll need to Use Odin to flash a compatible kernel. Odin is used with on a computer work your phone hooped up to it in download mode.
UPDATE: Now I got used to reinstall the ROM that used previously (2.3.4), I also install the CWM V4.0.1.5 but when I reboot system now goes back into recovery mode, what is the problem now?
ACTUALIZACION: ahora consegui reinstalar la ROM que solia usar anteriormente(2.3.4), tambien logre instalar el CWM V4.0.1.5 pero cuando le doy reboot system now vuelve a entrar en el modo recovery, cual seria el problema ahora?
Hello everybody !
As I would like to use an Adblocker and install Macrodroid as root user as well..........I'm just thinking to unlock my bootloader to install TWRP and Magisk.
However....I'm wondering if I will still be able to receive the OTA after that....?
OTA of the stable Global Rom or from the beta channel....as well..
I'm not sure of what rom I will use...because the PIE Global stable Rom is available ......I guess .:victory:
Thank you in advance for yours answers.
@+
Currently, no.
You'd need a custom recovery with muiui ota survival features like redwolf orangefox recover.
Twrp doesn't support ota
I have TWRP, Magisk and I am receiving OTAs (although I install it from TWRP because I want to keep Magisk)
It's not available. Hence me saying "currently, no"
But like Bortex said you can always just manually flash new Rom updates
That's it. Your are going to receive the OTA as long as you use an official Xiaomi ROM. If you are using Magisk, I recommend you to download the OTA but install it using TWRP instead of the Xiaomi updater.
Thanks you all for your replies.....
I think that I will unlock next week........Because I no longer support this flood of crappy ads...
?
If TWRP is not supported for the update you will have to use the original recovery, it is inside the download of the ROM in fastboot format and change it to support the update, some problems that you can find as the ARB and TWRP / Recovery that may you have to jump somehow, you have to re-download the complete ROM so you can finish the update, I happened with the redmi note 5, just tired as it was always a restart, another option is that you look a .eu since these are updated by TWRP, the original recovery is in the images folder, in fact they are all of the phone, within the download in .tgz format, the replacement of the recovery will have to do with fastboot commands and CMD (assuming you use windows) or Terminal, you need the unlocked bootloader for this.
----------------------
Lo pongo en expañol también ya que tengo que utilizar un traductor automático, mi inglés es muy básico.
Si TWRP no admite la actualización tendrás que usar la recovery original, está dentro de la descarga de la ROM en formato fastboot y cambiarla para que admita la actualización, algunos problemas que te puedas encontrar pues el ARB y TWRP/Recovery que puede que te lo tengas que saltar de alguna manera, que tengas que volver a descargar la ROM completa para que pueda terminar con la actualización, me pasaba con el redmi note 5, acaba cansando ya que era siempre un volver a empezar, otra opción es que busques una .eu ya que estas sí actualizan por TWRP, la recovery original la tienes en la carpeta images, de hecho están todas las del teléfono, dentro de la descarga en formato .tgz, la sustitución de la recovery la tendrás que hacer mediante comandos fastboot y CMD (suponiendo que emplees windows) o Terminal, necesitas el bootloader desbloqueado para esto.
Friends, it is my first discussion in the forum of this phone, like many, it happened to me that I lost the imei after trying to return to the rom stock from the rom experience pixel, I will be brief since my English is very poor, I installed via flash the rom stock SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml, since twrp recovery I did hard reset and left the phone without an operating system, then I just installed the updates and I had my imei again, I currently have the OPSS28.65-36 version -11-4 with my imei and VOLTE, I hope this information works for me, I will be aware of the forum and try to post the links this weekend, greetings from Colombia c:
------- español-------
amigos , es mi primera discucion en el foro de este telefono, como a muchos, me pasó que perdi el imei despues de intentar volver a la rom stock desde la rom experience pixel , seré breve ya que mi ingles es muy pobre, instalé via flash la rom stock SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml, desde twrp recovery hice hard reset y dejé el movil sin sistema operativo, luego solo instalé las actualizaciones y ya tenía nuevamente mi imei, actualmente tengo la versión OPSS28.65-36-11-4 con mi imei y VOLTE, espero les funcione tal como a mi esta información, estaré pendiente del foro y tratare de postear los links este fin de semana, saludos desde colombia c:
Como?
Hola, a que se refiere con "luego solo instale las actualizaciones" que actualizaciones, como lo hizo ?
uknown BASEBAND xt1801
RiichartM™ said:
Friends, it is my first discussion in the forum of this phone, like many, it happened to me that I lost the imei after trying to return to the rom stock from the rom experience pixel, I will be brief since my English is very poor, I installed via flash the rom stock SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml, since twrp recovery I did hard reset and left the phone without an operating system, then I just installed the updates and I had my imei again, I currently have the OPSS28.65-36 version -11-4 with my imei and VOLTE, I hope this information works for me, I will be aware of the forum and try to post the links this weekend, greetings from Colombia c:
------- español-------
amigos , es mi primera discucion en el foro de este telefono, como a muchos, me pasó que perdi el imei despues de intentar volver a la rom stock desde la rom experience pixel , seré breve ya que mi ingles es muy pobre, instalé via flash la rom stock SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml, desde twrp recovery hice hard reset y dejé el movil sin sistema operativo, luego solo instalé las actualizaciones y ya tenía nuevamente mi imei, actualmente tengo la versión OPSS28.65-36-11-4 con mi imei y VOLTE, espero les funcione tal como a mi esta información, estaré pendiente del foro y tratare de postear los links este fin de semana, saludos desde colombia c:
Click to expand...
Click to collapse
-----English
I installed the version for the xt1800 on my xt1801, it must be borne in mind that this does not bring any problem in terms of compatibility since it is basically the same hardware, there is also no problem if you are from a region other than South America or Europe, since how does it work ...
the procedure is easy, via fastboot Flash the rom stock SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml - clean installation, wipe data / system / cache / dalvik cache-
--https: //drive.google.com/file/d/1I_4Oydd97dSpjJEMuy03Pz_GjzS4mYAk/view? usp = sharing ---
Then I just started the computer, connect to the internet via Wi-Fi, eye you should not change anything of the ROM, this included the recovery stock, you must keep in mind that this process has only been tested on two reference teams xt1801 and xt1800 both with bootloader unlocked However, the process must work on phones with the locked bootloader that have this imei null problem, after starting the phone, in the configuration section download the new patches, these will be in order OPSS28.65-36-11- 4 (without imei) subsequently OPSS28.65-36-14 with security patch level of 1 August 2019, in this compilation the imei will be present and your imei null problem would be solved c:
I appreciate the thanks c:
-- español--
instalé la versión para el xt1800 en mi xt1801, hay que tener en cuenta que esto no trae ningún problema en cuanto a compatibilidad ya que es basicamente el mismo hardware, tampoco hay pronblema si eres de una region diferente a america del sur o europa, ya que igual funciona ...
el procedimiento es facil, via fastboot Flash the rom stock SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml - instalación limpia, wipe data/system/caché/dalvik cache-
--https://drive.google.com/file/d/1I_4Oydd97dSpjJEMuy03Pz_GjzS4mYAk/view?usp=sharing ---
luego solo inicié el equipo, conecte a internet por wifi , ojo no debe cambiar nada de la rom, esto incluido el recovery stock, debe tener en cuenta que este proceso solo ha sido probado en dos equipos de referencias xt1801 y xt1800 ambos con bootloader desbloqueado, sin embargo el proceso debe funcionar en telefonos con el bootloader bloqueado que presenten dicho problema de imei null, luego de haber iniciado el telefono, en el apartado de configuracion descargue los nuevos parches, estos serán en orden OPSS28.65-36-11-4 (sin imei) posteriormente OPSS28.65-36-14 con nivel de parche de seguridad de 1 agosto 2019, en está compilación el imei estará presente y su problema de imei null estaría solucionado c:
agradezco los agradecimientos c: :good::good::good:
Few days ago I wanted to flash Global Stable ROM & replace Chinese Stable ROM for xiaomi k20 pro. I got the permission to unlock my bootloader through mi flash unlock tool.
So I unlocked the bootloader on PC. Then I tried to flash Global Stable Fastboot ROM using mi flash tool. While I was flashing, mistakenly I chose "clean all & locked" on mi flash tool.
After flashing, my phone got stuck on recovery mode & it shows "This MIUI version can't be installed on this device". While I am trying to unlock my bootloader again using mi flash unlock tool then it says: active mi account from developer options but my phone is stuck on recovery mod.
Anyone can give me a proper solution how to get rid of it? I am stuck with it since a week.
Your help will be very much appreciated.
mshirq said:
Few days ago I wanted to flash Global Stable ROM & replace Chinese Stable ROM for xiaomi k20 pro. I got the permission to unlock my bootloader through mi flash unlock tool.
So I unlocked the bootloader on PC. Then I tried to flash Global Stable Fastboot ROM using mi flash tool. While I was flashing, mistakenly I chose "clean all & locked" on mi flash tool.
After flashing, my phone got stuck on recovery mode & it shows "This MIUI version can't be installed on this device". While I am trying to unlock my bootloader again using mi flash unlock tool then it says: active mi account from developer options but my phone is stuck on recovery mod.
Anyone can give me a proper solution how to get rid of it? I am stuck with it since a week.
Your help will be very much appreciated.
Click to expand...
Click to collapse
Only EDL flashing will unbrick. U need to search on net someone with EDL authorized account to flash your phone. This means u need to disassembly your back cover and do test point also.
You could have just unlocked the BL, installed TWRP/ORF and flash MIUI Global on it. Or you could have asked someone here before flashing. Now there is no other way but to flash MIUI CN through EDL mode. By looking at your mistake, I strongly believe you have no idea about these stuffs. Hence, I would not recommend you to try EDL at home. Better take the device to the service center and see if they are ready to help you for free.
Dadovvv said:
Only EDL flashing will unbrick. U need to search on net someone with EDL authorized account to flash your phone. This means u need to disassembly your back cover and do test point also.
Click to expand...
Click to collapse
Thank you, dear, but how can I get an authorized account, can I buy it, for example?
Saswata Chakraborty said:
You could have just unlocked the BL, installed TWRP/ORF and flash MIUI Global on it. Or you could have asked someone here before flashing. Now there is no other way but to flash MIUI CN through EDL mode. By looking at your mistake, I strongly believe you have no idea about these stuffs. Hence, I would not recommend you to try EDL at home. Better take the device to the service center and see if they are ready to help you for free.
Click to expand...
Click to collapse
Thank you very Mach
mshirq said:
Hace unos días quería actualizar la ROM estable global y reemplazar la ROM estable china para xiaomi k20 pro. Obtuve el permiso para desbloquear mi cargador de arranque a través de mi herramienta de desbloqueo flash.
Así que desbloqueé el cargador de arranque en la PC. Luego intenté flashear la ROM Global Stable Fastboot usando mi herramienta flash. Mientras parpadeaba, elegí por error "limpiar todo y bloquear" en mi herramienta flash.
Después de parpadear, mi teléfono se atascó en el modo de recuperación y muestra "Esta versión de MIUI no se puede instalar en este dispositivo". Mientras intento desbloquear mi cargador de arranque nuevamente usando mi herramienta de desbloqueo flash, dice: mi cuenta activa desde las opciones de desarrollador, pero mi teléfono está atascado en el modo de recuperación.
¿Alguien puede darme una solución adecuada para deshacerme de él? Estoy atrapado con eso desde una semana.
Tu ayuda será muy apreciada.
Click to expand...
Click to collapse
Hola,
Pudiste solucinar el problema?
mshirq said:
Hace unos días quería actualizar la ROM estable global y reemplazar la ROM estable china para xiaomi k20 pro. Obtuve el permiso para desbloquear mi cargador de arranque a través de mi herramienta de desbloqueo flash.
Así que desbloqueé el cargador de arranque en la PC. Luego intenté flashear la ROM Global Stable Fastboot usando mi herramienta flash. Mientras parpadeaba, elegí por error "limpiar todo y bloquear" en mi herramienta flash.
Después de parpadear, mi teléfono se atascó en el modo de recuperación y muestra "Esta versión de MIUI no se puede instalar en este dispositivo". Mientras intento desbloquear mi cargador de arranque nuevamente usando mi herramienta de desbloqueo flash, dice: mi cuenta activa desde las opciones de desarrollador, pero mi teléfono está atascado en el modo de recuperación.
¿Alguien puede darme una solución adecuada para deshacerme de él? Estoy atrapado con eso desde una semana.
Tu ayuda será muy apreciada.
Click to expand...
Click to collapse
Hola, pudiste recuperarlo?
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Authi said:
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Click to expand...
Click to collapse
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hi,
If you want to remove all the junk apps, then i would recommend using this tool
https://github.com/Szaki/XiaomiADBFastbootTools
Its a very simple and useful tool
All the instructions are given there as well.
For the list of bloatware, you can refer these websites:
https://rootmygalaxy.net/xiaomi-bloatware-list-remove-safely-from-miui/
https://selivan.github.io/2020/02/25/removing-bloatware-from-xiaomi-miui-android.html
https://technastic.com/xiaomi-bloatware-list-miui/
suarezfco said:
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
Click to expand...
Click to collapse
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
dajohlopez said:
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
Click to expand...
Click to collapse
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
suarezfco said:
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
Click to expand...
Click to collapse
Hola, si te bajas una rom que sea compatible con fastboot, NO necesitas para nada ninguna aplicación adicional, ni xiaomitools ni nada. Descomprimes el archivo .tgz (con Winrar por ejemplo) en una carpeta lo mas cercana a la raiz de C:\ (yo uso C:\Temp) Acto seguido, allí dentro, encontrarás un archivo llamado "flash_all.bat". Simplemente, verifica que tu pc reconozca el móvil, si conseguiste desbloquear el bootloader, ya deberías reconocerlo sin problemas, entonces clica ese archivo, se abrirá una ventana de Ms-Dos, y con un poco de paciencia, deja trabajar el archivo por lotes, y en unos minutos, tendrás flaseado tu telf. sin problemas. No te deseperes, si pasa algún minuto sin que parezca que no avanza, déjalo trabajar, y si todo va bien, lo tendrás resuelto.
Saludos
--------------------------------------------------
Hello, if you download a ROM that is compatible with FastBoot, you do not need any additional application, or Xiaomitools or anything else. Unzip the .tgz file (with WinRAR for example) in a folder as close to the root of c: \ (I use c: \ temp) Then, there inside, you will find a file called "flash_all.bat". Simply, check that your PC recognizes the mobile, if you managed to unlock the bootloader, you should already recognize it without problems, then click on that file, an MS-DOS window will open, and with a little patience, let the batch file to work in a few minutes, you will be flaky of your tel. No problem. Do not desperate, if you spend some minute without it, it seems that it does not advance, let it work, and if everything goes well, you will have it resolved.
Greetings