Database Develop

[RECOVERY] Team Win Recovery Project (TWRP)

Team Win Recovery Project 3.x​
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
One recovery to rule them all:
The common TWRP is compatible with GT-P3100, GT-P3110, GT-P3113, GT-P5100, GT-P5110 and GT-P5113 at the same time.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or lost Data!
* Please do some research if you have any concerns about this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this recovery: Stay away from this thread!
*/
Download:
http://andi34.github.io/recoveries_tab2.html
Note:
The new "Common TWRP" won't be able to flash Roms compiled before 22.03.2016.
Important links:
https://twrp.me - official TWRP page
https://twrp.me/FAQ - official FAQ
http://andi34.github.io/faq.html - FAQ by myself
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[unified] TWRP, Tool/Utility for the Samsung Galaxy Tab 2
Contributors
Android-Andi
Version Information
Status: Stable
Created 2016-09-18
Last Updated 2016-09-18

Reserved
DEVICE SPECIFIC TWRP
Device specific TWRP are discontinued!
Please note: our kernel detects your Tab2 variant at boot and chooses the right driver and config for your device! In some cases (e.g. if the mainboard or the screen got replaced) your device variant isn't detected right and it will use wrong driver!
I am not sure how many user are affected, but in such case we can skip the intelligent board detection and hardcode the variant.
Attached device specific TWRP should work to flash latest Android 7 builds.
Feel free to buy me a coconut water if it helped you to keep your Tab still, after many years, almost up to date.

Old recovery threads have been closed because device specific recoveries are discontinued and cwm & philz touch are not maintained anymore.
Let's keep this thread on topic here please:
- No rom questions
- no questions about other recoveries
- make sure posting a recovery.log, maybe dmesg if you have issues on this common twrp
~ All my work, news etc. on http://andi34.github.io ~

Thank you Andi for your kindness... I don't see twrp 3.0.2.5 in your files. Is it OK to install it

zidane01 said:
Thank you Andi for your kindness... I don't see twrp 3.0.2.5 in your files. Is it OK to install it
Click to expand...
Click to collapse
Yeah, it is ok. I'll upload it tomorrow to androidfilehost. It was a quick test to check if eMMC 4.5 work fine (some tab2 seem to have newer emmc, because of that current twrp wasn't able to use the emmc and flashing wasn't possible. Its also the reason why latest builds don't boot on some tab2 and getting only a black screen).
~ All my work, news etc. on http://andi34.github.io ~

hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?

arnavb8 said:
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
Click to expand...
Click to collapse
right, you can flash it with your current recovery (if you download the zip)

arnavb8 said:
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
Click to expand...
Click to collapse
Just flash it via current recovery :good:

Hello! Thank you for your good work, Android-Andi
Anyway, I'm just asking. Does everytime I update my CM13, do I also need to re-flash the Common TWRP? (Flash TWRP > Update CM13 > Flash TWRP again)

Kursem said:
Hello! Thank you for your good work, Android-Andi
Anyway, I'm just asking. Does everytime I update my CM13, do I also need to re-flash the Common TWRP? (Flash TWRP > Update CM13 > Flash TWRP again)
Click to expand...
Click to collapse
no not needed

Perfect & faster recovery 3.0.2-6.... Works very correctly for me ... Ty Andi

TWRP 3.0.2-7 uploaded
- Update the ext-csd.rev check for eMMC5.1 (fixes emmc detection for some tab2)

Hey everyone., how to install twrp in tablet,,?

jimwel said:
Hey everyone., how to install twrp in tablet,,?
Click to expand...
Click to collapse
Do u know how to use Odin?
If yes, flash twrp using Odin

ok, I know how to use odin, but am I flashing the twrp tar.md5 file only or is there something else I'm supposed to be flashing? can't find a thorough guide for rooting the galaxy tab 2 7.0 p3113

You can read here
BlaineLondon said:
ok, I know how to use odin, but am I flashing the twrp tar.md5 file only or is there something else I'm supposed to be flashing? can't find a thorough guide for rooting the galaxy tab 2 7.0 p3113
Click to expand...
Click to collapse
http://forum.xda-developers.com/sitesearch.php?q=How to root p3113 (here is wrong thread for this )
---------- Post added at 18:55 ---------- Previous post was at 18:47 ----------
jimwel said:
Hey everyone., how to install twrp in tablet,,?
Click to expand...
Click to collapse
Take zip twrp , sent zip to SD & install via recovery...Or take .tar-md5 file and flash it with Odin... From here by Andi : https://andi34.github.io/recoveries_tab2.html (you must read first)

Windows Defender detected a Trojan in the latest TWRP zip (3.0.2-8).
https://www.androidfilehost.com/?w=...d44fd3d141077f60723133fd33b53c552b55892a840a0
Not sure if it's a false positive, or if maybe the Android File Host mirror was infected.
Update: I searched the md5 in VirusTotal and it came up clean
https://www.virustotal.com/en/file/...86575991df34d1ebd93aaf4a6fea9bf9f4c/analysis/
I also redownloaded the zip file a 2nd time, with no virus warning. So looks like it was a false alarm.

I use 3.0.3-0 .... Excellent ! Thanks Andi

I have tried the common 3.0.3-0 on my tab 2 7.0 (p3110) but it installs larger than the screen and the touch wont work, connected mouse to OTG but nothing would work. ended up forcing a shutdown and reflash old version.

peeko1979 said:
I have tried the common 3.0.3-0 on my tab 2 7.0 (p3110) but it installs larger than the screen and the touch wont work, connected mouse to OTG but nothing would work. ended up forcing a shutdown and reflash old version.
Click to expand...
Click to collapse
Sounds like your bootloader makes trouble.
Edit:
https://androidfilehost.com/?w=files&flid=37700
Flash the one for your device using Odin.
Gesendet von meinem A0001 mit Tapatalk

[TOOL][TISSOT]Tissot Suite V2.0 [Remove Bootloader Unlock Warning][Backup Partitions]

Hi Guys
Today i'm Presenting Tissot Suite V2.0
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features & Info:​
-Veriffy the Deivce (ADB recognized)
-Unlock Bootloader
-Boot TWRP 3.2.1-2 Recovery
-Remove Bootloader Unlocked Warning
-Backup your Partitions
-Pull, edit, flash build.prop
- Pull apk from system
- Boot in Bootloader mode.
- Backup Modem to Internal Storage
- Flash Modem from Backup
- Reboot bootloader.
-Go to recovery.
-Reboot the Phone.
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Instructions:
1.Unpack the Tools Zip
2.Run the Tissot_Suite.bat
3.Connect the Device
Download:​
Get It​
Issues:​
I dont know of any, you tell me.​
Donate:​
You can Support This Project for Next Release with Paypal Donations for my Work ,List with People who Donated will be posted in this OP.​
P.S If you like the Tool smash the Thanks Button​
Enjoy!​
XDA:DevDB Information
[TOOL][TISSOT]Tissot Suite V2.0 [Remove Boot Warning] [Bootloader-Unlock][Backup].etc, Tool/Utility for the Xiaomi Mi A1
Contributors
Alek Dev
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2018-04-14
Created 2018-04-14
Last Updated 2018-04-15

Changelog:​
Version 2.0​-Remove Bootloader Unlocked Warning
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Version 1.0​-First Release

Thank you so much dude.Hope you will be able to add imei flash and backup tool soon.:good:

You can add the feature to flash stock rom

Any Linux version

??????

Today coming new version with new feature to remove the Bootloader Unlocked Watermark [emoji6]
Sent from my Mi A1 using Tapatalk

Alek Dev said:
Today coming new version with new feature to remove the Bootloader Unlocked Watermark [emoji6]
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Oh, wow. May I ask how is that possible?

UPDATE!!!:​
Version 2.0​-Remove Bootloader Unlocked Warning
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Download:​​
Get It​

Alek Dev said:
Today coming new version with new feature to remove the Bootloader Unlocked Watermark [emoji6]
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Wonderfull,
May i ask how the tool proceed to remove the warning?

Alek Dev said:
UPDATE!!!:
Version 2.0​-Remove Bootloader Unlocked Warning
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Download:
Get It​
Click to expand...
Click to collapse
Getting permission denied error while backing up partitions also I'm not able to pull apk from device it is also giving error

Midomad said:
Wonderfull,
May i ask how the tool proceed to remove the warning?
Click to expand...
Click to collapse
I make custom splash which removes the bootloader warning and the tool first erases the splash then updates with the new one... that's it
Sent from my Mi A1 using Tapatalk

gthakur said:
Getting permission denied error while backing up partitions also I'm not able to pull apk from device it is also giving error
Click to expand...
Click to collapse
Run as Admin the Tissot suite bat also enable developer options and check Allow usb debugging that will work you will get some prompt and check that Yes
Sent from my Mi A1 using Tapatalk

Alek Dev said:
Run as Admin the Tissot suite bat also enable developer options and check Allow usb debugging that will work you will get some prompt and check that Yes
Click to expand...
Click to collapse
Sir getting this type of error while pulling apk from bat file . I am running it as administrator.
Thanks for your time

gthakur said:
Sir getting this type of error while pulling apk from bat file . I am running it as administrator.
Thanks for your time
Click to expand...
Click to collapse
Thank you i will check and fix[emoji6]
Sent from my Mi A1 using Tapatalk

Remove Bootloader Unlocked working fine..
Thanks for the Tool

Nice.. thanks for sharing buddy

try removing unlock bootloader splash, and it work.
But the animations is to slow, not blink up like stock.

gusbalaa said:
try removing unlock bootloader splash, and it work.
But the animations is to slow, not blink up like stock.
Click to expand...
Click to collapse
Yeah stays black at the part when says Bootloader warning this is the reason i was thinking to replace that part but it's very hard...
Sent from my Mi A1 using Tapatalk

Thanks for this! I do have 2 concerns.
1.
Code:
adb reboot bootloader
TIMEOUT /T 10 /NOBREAK
Is not necessary. Issuing a fastboot command will wait for the device to get into fastboot and will perform the command once it's there.
2.How were you able to fix the splash.img? Some folsk were trying to get the bootloader unlocked warnings removed but no one has succeeded so far. I'll try out your splash image a bit later to see if it's removed all of them.
Edit - Yes, it did remove all bootloader warnings.

[LOCKED BOOTLOADER] Temporary TWRP3.3.1 for Samsung Galaxy S7Edge (Snapdragon) G935XX

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Code:
* [B][U]Your warranty is now void.[/U][/B]
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
DOWNLOAD:
Download TWRP from here
HOW DO I ENTER RECOVERY:
- Flash ENG OREO RECOVERY via Odin in AP slot
- Reboot into recovery
If you are on android 8.0 and this is first time using this TWRP you need to install modified fstab.qcom into /system/vendor/etc if not you will fall into encryption issues
WARNING: this require data wipe otherwise skip over next step
- Windows user: Run fstab.bat
- Linux user: Run fstab.sh in terminal
- Wipe data/factory reset
To enter TWRP recovery
- Windows: Run twrp.bat
- Linux: Run twrp.sh in terminal
BUGS:
- MTP
THANKS:
@jrkruse for most stuff, guides and help
Hashcode
TWRP team
jcadduono for device tree

reserved

Wait can we flash roms now?

Leone/kyleproxx said:
Wait can we flash roms now?
Click to expand...
Click to collapse
Why not, but dont flash custom recovery/boot img we still locked

afaneh92 said:
Why not, but dont flash custom recovery/boot img we still locked
Click to expand...
Click to collapse
Um it doesn't work for my sprint s7 edge, it a on bootloader 7 btw
Edit: when I try to flash in odingbit says fuse 2 binary 1

Leone/kyleproxx said:
Um it doesn't work for my sprint s7 edge, it a on bootloader 7 btw
Edit: when I try to flash in odingbit says fuse 2 binary 1
Click to expand...
Click to collapse
Your recovery partition fused on B2 you cant flash recovery from older Rev.

afaneh92 said:
Your recovery partition fused on B2 you cant flash recovery from older Rev.
Click to expand...
Click to collapse
would you be able to fix it so i can?

Wait, what is this if the bootloader is locked?

rlewis312010 said:
Wait, what is this if the bootloader is locked?
Click to expand...
Click to collapse
I think this allows you to install roms even with the locked bootloader
Edit: if you are willing to try this try installing one of the port roms for snapdragon

Leone/kyleproxx said:
would you be able to fix it so i can?
Click to expand...
Click to collapse
If there ENG recovery with rev2 you can run it
Leone/kyleproxx said:
I think this allows you to install roms even with the locked bootloader
Edit: if you are willing to try this try installing one of the port roms for snapdragon
Click to expand...
Click to collapse
As I said before skip installing custom boot/recovery img

afaneh92 said:
If there ENG recovery with rev2 you can run it
As I said before skip installing custom boot/recovery img
Click to expand...
Click to collapse
Could I build a recovery myselft?

Flagged as Virus in Windows Defender
Windows flagged both downloads as Trojans (Win32/Spursint.F!cl) Has anyone else downloaded with this warning or did AFH get spammed?

Sagoode said:
Windows flagged both downloads as Trojans (Win32/Spursint.F!cl) Has anyone else downloaded with this warning or did AFH get spammed?
Click to expand...
Click to collapse
I was able to download but I cant install because of fuse 2 binary 1 error

i got this to work and actually flashed the norma s9+ port from hillary trump on my g935t. (after removing the kernel insall lines from the updater script) since the rom was made for the 9350 it was VERY buggy/laggy. BUT IT DID BOOT UP!!!!!:laugh::laugh::laugh::laugh:
now we just need someone to build us a rom...:good:

bigTINY779 said:
i got this to work and actually flashed the norma s9+ port from hillary trump on my g935t. (after removing the kernel insall lines from the updater script) since the rom was made for the 9350 it was VERY buggy/laggy. BUT IT DID BOOT UP!!!!!:laugh::laugh::laugh::laugh:
now we just need someone to build us a rom...:good:
Click to expand...
Click to collapse
And to make a rev 2 eng recovery file so u can install twrp

Leone/kyleproxx said:
And to make a rev 2 eng recovery file so u can install twrp
Click to expand...
Click to collapse
the one provided here worked for me

bigTINY779 said:
the one provided here worked for me
Click to expand...
Click to collapse
Read the conversations above from beginning to ed then ull understand

I'm also getting fuse 2 > binary 1 when I try to flash it.
Wish I had not installed the updates a few days ago. :/

bigTINY779 said:
i got this to work and actually flashed the norma s9+ port from hillary trump on my g935t. (after removing the kernel insall lines from the updater script) since the rom was made for the 9350 it was VERY buggy/laggy. BUT IT DID BOOT UP!!!!!:laugh::laugh::laugh::laugh:
now we just need someone to build us a rom...:good:
Click to expand...
Click to collapse
Try flashing magisk and see if we now have a new root alternative
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
@jrkruse could you make a rev 2 ENG Oreo recovery?

Leone/kyleproxx said:
Try flashing magisk and see if we now have a new root alternative
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
@jrkruse could you make a rev 2 ENG Oreo recovery?
Click to expand...
Click to collapse
Please stop posting things you dont know about!
We cant make stock recovery, samsung do.
Also you cant flash custom boot.img or modify it by any root method. Only boot.img or recovery.img signed by samsung can be flashed.

[FASTBOOT][UNOFFICIAL][9.0] Android One port for Nokia 7

If you want to repost this unofficial port to other websites, please ask me for permission, thanks.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void. *
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
*/
As we all know, Nokia 7 C1N doesn't have global release at all.
By coincidence, the Nokia 6.1 PL2 Global system works perfectly on Nokia 7, so I did few modifications to make it work on Nokia 7.
What I modified?​- Detection to Nokia 7 TA-1041, to make fingerprint responses as expect
- Magisk patched boot image integration to make the modification valid, so you'll see Magisk Manager stub app once you finished first boot
Base build​source: C1N-347D-0-00CN-B02
target: PL2-351F-0-00WW-B04
result: HCTSW_C1N-351F-0-00WW-B04
So March 2019 security update.
What's working?​- Camera
- Fingerprint
- NFC
- WiFi
- LTE Mobile Data, including VoLTE (Google Fi SIM is known working)
- Telephony and SMS
- SafetyNet and CTS integration (Google Pay working!)
- Widevine L1 DRM
What's not working?​- OTA Update (It's unofficial, so you can't expect any official update, as recent security updates seems meaningless)
- You will not see Android One splash if you flash it on TA-1054
- You tell me!
How to flash​
1. To flash this custom ROM, you must have a fully unlocked bootloader, which you can confirm unlock state by this command:
Code:
fastboot oem device-info
2. You must change SKUID to 600WW by using TWRP for other sdm660 based devices (e.g. Nokia 7 Plus or Nokia 6.1 Plus), or under rooted state.
Following command under Terminal can change your SKUID immediately:
Code:
# printf '600WW' | busybox dd of=/dev/block/bootdevice/by-name/deviceinfo bs=1 seek=5040 count=5 conv=notrunc
You can push a busybox binary if command not found.
3. For Windows users, please extract GFS_for_Windows and place all seven files along with other 47 files you extracted, so you'll get 54 files. For macOS/Linux distro users, I would assume you're familiar with fastboot commands, so I guess you can write one by looking at my batch...
4. Double click the "generic_flash_script_gsi_sdm660_64.bat", then input "yes" (without quotes), press enter, connect your phone that powered off or entered fastboot mode.
5. Press enter twice to start flashing, and wait for the procedure complete.
6. As for FRP lock, don't worry, as the phone can't search any new updates from Google server, you'll be asked to input your valid Google account. (For Chinese users who can't get access to Google services, please solve yourself lul)
7. You can either choose remove the Magisk Manager stub or reinstall it as you wish, then you can reinstall Magisk under Magisk Manager itself to make module function valid.
8. That's it, enjoy
Screenshots​see attachments
Download link​
For Chinese users: Baidu Netdisk Password: em60
For International users: Android File Host
Checksum​
Code:
File: GFS_for_Windows.zip
Size: 1017769 bytes
MD5: 9509D0F0B2AB0EADEAAF0B9BA0D64010
SHA1: 37E38A5CEAF1221FB180454DF1C9712C48AA76B2
CRC32: F2107F02
File: HCTSW_C1N-351F-0-00WW-B04_unofficial_CTSpass_homebrew_ntonly.7z
Size: 1676749049 bytes
MD5: 56E1CB3DEDA34AC661F7A7E638A1952A
SHA1: EB2CDB64B624137954DEAA7EFDF38B5B1E624CE5
CRC32: 20EDFE34

reserved

reserved for later use

Oh my God I can't believe. :laugh:
Thank you but I'm not feeling confident to try now. :silly:
But I will do at the right time.

I cant flash becoz its said u dont have unlocked bootlooader properly

hikari_calyx said:
To flash this custom ROM, you must have a fully unlocked bootloader
Click to expand...
Click to collapse
Click to expand...
Click to collapse
please any help/clue how to unlock the bl

Faisal kacho said:
I cant flash becoz its said u dont have unlocked bootlooader properly
Click to expand...
Click to collapse
Unlock Bootloader and Install Android ONE , My Nokia 7 can share location Thank You Very Much , @hikari_calyx @narender singh

RyanCMS said:
Unlock Bootloader and Install Android ONE , My Nokia 7 can share location Thank You Very Much , @[email protected] singh
Click to expand...
Click to collapse
The Ok Google command working?

RyanCMS said:
Unlock Bootloader and Install Android ONE , My Nokia 7 can share location Thank You Very Much , @hikari_calyx @narender singh
Click to expand...
Click to collapse
how does the unlocking work?

paidelis said:
the ok google command working?
Click to expand...
Click to collapse
perfect
---------- Post added at 03:58 AM ---------- Previous post was at 03:39 AM ----------
wieraz said:
how does the unlocking work?
Click to expand...
Click to collapse
@hikari_calyx @narender singh ask him ,

s***t ... forget to check this device here in xda
downloading now ... thanks man ...
ps: can we expect any update if 6.2 is update?

Working as it should ... and finally Location History Working ...
but
no double tap to wake up the screen ... everything else just perfect ??

@hikari_calyx I bought a new PC and maybe try this port of Android One but I have some doubts:
1 - I unlocked my phone's bootloader once and backed up the key, there's a way to use this key again or I have to do all the process?
2 - If something goes wrong (like LTE only working on slot 2) there's a way to go back to official firmware?
3 - Do you have plan to update it someday?
Thank you and respect bro.

PaideLis said:
@hikari_calyx I bought a new PC and maybe try this port of Android One but I have some doubts:
1 - I unlocked my phone's bootloader once and backed up the key, there's a way to use this key again or I have to do all the process?
2 - If something goes wrong (like LTE only working on slot 2) there's a way to go back to official firmware?
3 - Do you have plan to update it someday?
Thank you and respect bro.
Click to expand...
Click to collapse
try answering ...
1. if you're not relocked it then it still unlock
2. as long as it unlocked ... you can easily go back to stock or any other rom

hikari_calyx said:
..
[/CODE]
Click to expand...
Click to collapse
Which 7Z of the 2 should i download from android file host?
HCTSW_C1N-351F-0-00WW-B04_unofficial_CTSpass_homebrew_ntonly.7z OR HCTSW_C1N-354H-0-00WW-B01_C1C_TA1041_NTOnly.7z ?
I have a nokia 7 ta-1041.
Thank you very much

pappalard0 said:
Which 7Z of the 2 should i download from android file host?
HCTSW_C1N-351F-0-00WW-B04_unofficial_CTSpass_homebrew_ntonly.7z OR HCTSW_C1N-354H-0-00WW-B01_C1C_TA1041_NTOnly.7z ?
I have a nokia 7 ta-1041.
Thank you very much
Click to expand...
Click to collapse
the latest one ... see the date

3Dota said:
the latest one ... see the date
Click to expand...
Click to collapse
Bulls*It... I installed the latest One and It automaticaly upgraded to android 10. Camera and mic not working, and my bootloader Is locked now..damn

pappalard0 said:
Bulls*It... I installed the latest One and It automaticaly upgraded to android 10. Camera and mic not working, and my bootloader Is locked now..damn
Click to expand...
Click to collapse
lmao ... is there any instructions that state the rom is upgrade able? who tell you to update it to Android 10? ...
be smart man ... this is port not official rom ... how the hell official update will work?

It says need to unlock nootloader where infact it is already unlock, i can even flash 7.1.1 and 8.0.0 back and fort

Development [Recovery] [13] [BETA] [venus]・ OrangeFox - UNOFFICIAL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OrangeFox Recovery is one of the most popular custom recoveries, with amazing additional features, fixes and a host of supported devices.​- Warnings :
​ Your warranty is now void, or not... (i have no idea bruh)
・ I'm not responsible for bricked devices, thermonuclear war or alarm app fails.
・ If it's your first time or you're unexperienced with flashing ROMS, please do some search before flashing!
・ YOU are choosing to make these modifications, you're the only responsible guy for messing up if you do so.
- Informations :
- Was built on the 11th of September 2022.
- Maintained by kota. (me)
- Used Kernel : Here!
- What's broken ?
- The Status Bar can now be totally seen but doesn't totally fit.
- Vibration still doesn't work normally (there have been changes to it tho)
- Please report anything else if you do find an issue!
- Installation Guides :
- Notes :
A glitch may happen where booting it via fastboot makes touch doesn't work sometimes.
To fix that, i also provided a flashable zip via sideloading (tested on TWRP) that directly installs it.
- First way to install : (Casual way, if touch works okay | .img )
1 · Reboot into bootloader and boot OrangeFox by using this command : fastboot boot OrangeFox.img
2 · Once the Recovery boots up, go to 4th menu (3 lines), and on it, click "More".
3 · Then click More, and Flash Current OrangeFox Recovery, then swipe and reboot!
- Second way : (More tricky, but always works out fine | .zip )
1 · Reboot into Recovery Mode with TWRP installed.
2 · Prepare an ADB Session on your PC and add to it the .zip version of OrangeFox.
3 · Get into Sideload Mode and do this command on adb : adb sideload OrangeFox_Name_Example.zip
- You're now done with flashing!
- Download Links :
- OrangeFox Folder (ZIP + IMG version) : Here!
- End :
Well, here it is! Real working OrangeFox for Mi 11.
At first it was just a random idea that went threw my head two month ago.
Now it's a real thing, it was really time consuming and head scratching but it was all worth it!
Enjoy and have a nice day!
By kota.

Please note!
For the second flashing method, TWRP isn't really "required", it's more to assure that your recovery let's you sideload any unsigned packages. You should be able to flash from some recoveries such as Pixel Experience and ArrowOS recovery.
As for unsupported ones such as CherishOS, RiceDroid, etc... They'll probably throw an Error 21 when trying to sideload any unsigned packages. (in this case, Orangefox but could also be Magisk) For them, simply use TWRP.

Reserved! #2

does this allow full backup and restore of the ROM?

Sage said:
does this allow full backup and restore of the ROM?
Click to expand...
Click to collapse
The "quick backup" (whatever it is) provides a backup of data and boot partitions. I'm not totally sure that the quick backup option is related to the one on main screen tho

Hello, thanks for your work, this recovery is amazing !

Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)

bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted

Nysioko said:
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Click to expand...
Click to collapse
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response

bongmeiister said:
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
Click to expand...
Click to collapse
The code to decrypt the partition is the same you had to put in to lock your phone. Say you have a pin code of 3926, just type 3926 to unlock the score from orangeFox

bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Of course it's made for A12

First link is dead

Nysioko said:
First link is dead
Click to expand...
Click to collapse
Oops! Fixing that

kotalol said:
Oops! Fixing that
Click to expand...
Click to collapse
Thanks

Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...

nelvinchi said:
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
Click to expand...
Click to collapse
Yep, A13 is coming soon...
With A13 decryption support, fix trial to vibration, removal of flashlight button, base on latest sekaiacg TWRP and much better holepunch handle!

Does it recognize and mount USB OTG? So I can do backups to USB storage?

seemebreakthis said:
Does it recognize and mount USB OTG? So I can do backups to USB storage?
Click to expand...
Click to collapse
Not yet because of the used kernel in pre-release, the next version will probably support ExFat USB OTG.

Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !

epcwong said:
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
Click to expand...
Click to collapse
It does!