Related
ah please help. I have rc29 or whatever because when i type in reboot it restarts my phone. I ahve a SIM card in but I cannot get adb shell started. :/
when i plug in my phone nothing happens.
I d/l the sdk but it doesnt ask for the usb thing.
PLEASE HELP
i have tried everything. adb isnt seenig my device
you have to make sure USB debugging is on inside Settings | Applications | Development
Edit: hehehe ^^^ what he said.
Go to Settings > Applications > Development > USB Debugging (check)
well you cant do that when you cant even activate your phone. im doing the activate without data plan. help?
samrozzi said:
well you cant do that when you cant even activate your phone. im doing the activate without data plan. help?
Click to expand...
Click to collapse
did you try typing
<enter>setprop persist.service.adb.enable 1<enter>
?
yes hundreds of times. when i enter it and i plug into computer nothing happens. nothing pops up on vista. is there a way to maybe delete a driver for android I maybe installed already?
its that my pc isnt detecting my g1. it says no device detected. PLEASE HELP.
idk maybe I need a way to usb debug without activating?
i think its something with my driver. i might have installed it long ago? idk. any way to uninstall and reinstall?
samrozzi said:
i think its something with my driver. i might have installed it long ago? idk. any way to uninstall and reinstall?
Click to expand...
Click to collapse
If you have Windows Vista or 7 you can right click my comptuer > Manage > Device Manager (or just call up device manager in xp) and look for ADB Interface.
Right Click HTC Dream Composite ADB Interface and click Uninstall.
Unplug and replug the USB and it should re-detect.
nevermind me =)
Same problems
I am having the same problems as "samrozzi".
Phone is OK with Reboot command.
Will not recognize "Setprop Persist etc".
My device manager shows (HTC Android Phone USB Device) in "Disk Drives" but nothing about ADB interface.
Also you guys are saying
"Go to Settings > Applications > Development > USB Debugging (check)
Settings where? On the phone? not possible without getting past the registration screen.
In SDK ?
In ADB ?
On Computer somewhere ?
I have un-installed the driver for the phone. I reconnect and turn the phone on. The computer says HTC Google phone--hardware is installed and ready to use. Then it goes away and doesn't seem to be of any further use.
Please help, my brain is starting to sizzle from info-overload.
unkabuzz said:
I am having the same problems as "samrozzi".
Phone is OK with Reboot command.
Will not recognize "Setprop Persist etc".
My device manager shows (HTC Android Phone USB Device) in "Disk Drives" but nothing about ADB interface.
Also you guys are saying
"Go to Settings > Applications > Development > USB Debugging (check)
Settings where? On the phone? not possible without getting past the registration screen.
In SDK ?
In ADB ?
On Computer somewhere ?
I have un-installed the driver for the phone. I reconnect and turn the phone on. The computer says HTC Google phone--hardware is installed and ready to use. Then it goes away and doesn't seem to be of any further use.
Please help, my brain is starting to sizzle from info-overload.
Click to expand...
Click to collapse
did you install the driver
USBDeview
Try this:
- get USBDeview : http://www.nirsoft.net/utils/usb_devices_view.html
- unplug phone from PC
- in USBDeview delete all drivers that have anything to do with HTC
- plug phone in PC; drivers should now install correctly IF you have downloaded and installed them before
If the above procedure does not work reinstall drivers (from SDK) and start all over.
check out this thread on "How to solve "G1/HTC Magic not recognized by ADB under Windows"
http://groups.google.com/group/android-beginners/browse_thread/thread/ff713181959c48ee
pascanu said:
If the above procedure does not work reinstall drivers (from SDK) and start all over.
Click to expand...
Click to collapse
I don't see any "drivers" in SDK. I assume they are in "tools"??
unkabuzz said:
I don't see any "drivers" in SDK. I assume they are in "tools"??
Click to expand...
Click to collapse
it should be in the main folder of the sdk "usb driver"
Vulgrim said:
it should be in the main folder of the sdk "usb driver"
Click to expand...
Click to collapse
When I open "android-sdk-windows" I see;
add ons (empty)
platforms (empty)
SDK Readme
SDK Setup (green droid) running/opening this gives me a black rectangle that is gone in an instant. (I assume that this is a command screen)
and tools
Inside tools are 24 folders.
I have opened all that I can inside tools "all" of them open the same black rectangle and then disappear.
Closest thing I can see is AdbWinUsbApi.dll Don't see any way to open it successfully............
Found another thread
http://href.to/eNE
http://www.anddev.org/download.php?id=449
(Android USB Drivers)
that gave me drivers that seem OK.... HOWEVER...
You guys are also saying
"Go to Settings > Applications > Development > USB Debugging (check)
Settings where? On the phone? not possible without getting past the registration screen.
In SDK ?
In ADB ?
On Computer somewhere ?
unkabuzz said:
You guys are also saying
"Go to Settings > Applications > Development > USB Debugging (check)
Settings where? On the phone? not possible without getting past the registration screen.
In SDK ?
In ADB ?
On Computer somewhere ?
Click to expand...
Click to collapse
Can anybody help ?? Please ??
unkabuzz said:
Can anybody help ?? Please ??
Click to expand...
Click to collapse
settings on the phone
unkabuzz said:
When I open "android-sdk-windows" I see;
add ons (empty)
platforms (empty)
SDK Readme
SDK Setup (green droid) running/opening this gives me a black rectangle that is gone in an instant. (I assume that this is a command screen)
and tools
Inside tools are 24 folders.
I have opened all that I can inside tools "all" of them open the same black rectangle and then disappear.
Closest thing I can see is AdbWinUsbApi.dll Don't see any way to open it successfully............
Found another thread
http://href.to/eNE
http://www.anddev.org/download.php?id=449
(Android USB Drivers)
that gave me drivers that seem OK.... HOWEVER...
You guys are also saying
"Go to Settings > Applications > Development > USB Debugging (check)
Settings where? On the phone? not possible without getting past the registration screen.
In SDK ?
In ADB ?
On Computer somewhere ?
Click to expand...
Click to collapse
Run the setupsdk.exe and it should be under "available" for download, it will be called something like Usb Drivers r2 or something
Hi all
How to write the IMEI What should I do?
Also, as BT address or going on?
Sent from my SC-02C using xda premium
Why whould you change imei?
Thanks for reply
We think the Internet can not be used for different IMEI is written in the back of the battery pack
Sent from my SC-02C using xda premium
I don't know man, I think that mobile operators identify users with simcards.
Maybe say something more about your situation.
xnorenkaix said:
Hi all
How to write the IMEI What should I do?
Click to expand...
Click to collapse
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
You should know that in many countries changing IMEI is illegal!
How did your reply Thanks...
I have come to learn about the IMEI
How did your reply Thanks
Sent from my SC-02C using xda premium
radkor said:
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
You should know that in many countries changing IMEI is illegal!
Click to expand...
Click to collapse
i cant do it coz i recieved unknown device alert when selected CP USB
i recieve error when pressing enter after typing the right IMEI.
What should i do?
sorry
i didn't type ","
everything is perfect now.
Thanks
p.s. i used "tutty" instead of "hyperterminal" cause of windows 7
i cant do it ....coz when i go to ur 2nd step ....it says coonection problem or invalid MMI code
P.S my IMEI is not displaying after flashing CM7 ...and i seriously want it back :|
Help rebuild imei after smartflesh tool. Now installed Zeus 2.2 + Hidden menu pack. In "Port settings" i have only three points: "Diag setting" "USB Switching" "Data Setting". "Select CP USB" - I do not have.
--
update: Found a shift in the "AP CP USB Switchings". Now another problem, I do not see the printed text in HyperTerminal. If i tape "at" blind to dial and press enter, see the corresponding OK.
---
In the blind well replaced. Thank you.
This was successful as if by magic!
Was really helpful, thank you.
Sent from my optimus bright
hi,
i always get "imei write error" when i try changing imei on my p970 ob.
do i need root rights maybe?
hxxp://www7.pic-upload.de/25.06.12/brc5zeolbtj.jpg
I have tried with all terminal apps like hyperteminal, tutty, putty,...
thanks
Same problem
rakeem78 said:
hi,
i always get "imei write error" when i try changing imei on my p970 ob.
do i need root rights maybe?
hxxp://www7.pic-upload.de/25.06.12/brc5zeolbtj.jpg
I have tried with all terminal apps like hyperteminal, tutty, putty,...
thanks
Click to expand...
Click to collapse
I have the same exact problem and don't know what to do about it. I don't think you can get root as that's not really a terminal??
EDIT: i just got it to work. 2 things I did differently 1) turned off airplane mode. 2) didn't change the baud rate setting to match the one in the lg mobile modem details. probably airplane mode was the problem though . Also, I used the commas, but not one at the end.
Hello.
thanks, it work perfect.
Thanks for your help.
Sent from my LG-P970 using xda app-developers app
terminal does not respond
Hi all,
i have t-mobile g2x (aka p999dw). i followed all steps. For access to hidden menu i typed "1809#*999" (coz my device is 999dw. It appeared and i tapped to port settings. I also checked "retain cp usb after reboot" and phone rebooted. i chose correct port. and in putty i checked "serial" section, then typed comx (which my own), baud rate 115200. Everything fine. When i hit the Enter putty pops-up a window but nothing respond.
Where am i wrong?
I have used tutty. for the first time i saw no signs in window. they appear after second open
tutorial request
ramrod said:
I have used tutty. for the first time i saw no signs in window. they appear after second open
Click to expand...
Click to collapse
can you upload a video about "how did you" or could you share photo tutorial?
try another hyperterminal
the first two ones did not work for me
i had to do a full-flash of my p970 and after this, there is no imei
i tried to change it but at point 3. "to set into cp-mode", my computer didn't install a driver and so he didn't recognized my phone.
when i turn back into ap-mode, he recognize it. in cp-mode not
Brainfart91 said:
i had to do a full-flash of my p970 and after this, there is no imei
i tried to change it but at point 3. "to set into cp-mode", my computer didn't install a driver and so he didn't recognized my phone.
when i turn back into ap-mode, he recognize it. in cp-mode not
Click to expand...
Click to collapse
How about trying another USB port? Or maybe another PC, if you have the chance, to use another one
I cannot get ADB to work with the instructions provided here:
http://stackoverflow.com/questions/22894521/lg-l90-doesnt-install-debug-usb-drivers
what am I missing?
You need to enable developer options & USB debugging.
Sent from my LG-D415
If you still need help I can team view your computer and help you set it up
I have installed this drive package : http://www71.zippyshare.com/v/54274586/file.html my device (D410) was not being recognized by my computer.
kinesis said:
I cannot get ADB to work with the instructions provided here:
http://stackoverflow.com/questions/22894521/lg-l90-doesnt-install-debug-usb-drivers
what am I missing?
Click to expand...
Click to collapse
Does 'adb devices' report your device as offline? If so, you need newer adb binaries. I've created a zip with the newest adb binaries and am hosting it. I'll post a link if you'd like.
Sent from my LG-D415 using Tapatalk
In the PC connection settings theres goto connection type and in the top left corner there is a little button that looks like a download button. Hit that and it will open up on your PC as an install disc that will install the adb drivers and lg mobile support program that'll keep the drivers up to date. Then. Open the android SDK manager and make sure your platform tools are fully updated
Sent from my LG-D415 using XDA Free mobile app
enable usb debugging lg 90
how exactly do you enable it? it is greyed out on my phone and wont let me enable
creativetrendz said:
You need to enable developer options & USB debugging.
Sent from my LG-D415
Click to expand...
Click to collapse
dextrom16 said:
how exactly do you enable it? it is greyed out on my phone and wont let me enable
Click to expand...
Click to collapse
For CM:
Go to Settings->About Phone and tap on the Build Number 7 - 8 times. You should see a Toast message popup that says "You're now a developer". Back out of About Phone to Settings. You should see a entry "Developer Options" just above "About Phone".
I haven't been on stock for many many months. If you're running stock it may be different. I honestly don't remember.
Hello guys.
I can't get the two apps in the title to work. GSam doesn't even load once opened (all set to 0:00:00 and on "loading"), and both of them reject the command from adb for advanced stats, telling me "operation not allowed [...] neither user 2000 nor current process has android.permission.GRANT_RUNTIME_PERMISSIONS."
Do you know what's going on?
Answer on your question. Give all permissions to bbs from security app.
xdamami said:
Answer on your question. Give all permissions to bbs from security app.
Click to expand...
Click to collapse
Still no luck, I went to security app, manage application, BBS and activated all it needs, so permissions to phone, storage, start in background, lockscreen and home screen.
What am I still missing? From my PC I can't use the adb command..
Up
Anyone?
"operation not allowed [...] neither user 2000 nor current process has android.permission.GRANT_RUNTIME_PERMISSIONS."
Be sure you enabled TWO settings in Developer Options :
USB Debugging
USB Debugging (Security Settings)
Good luck!
virgil31 said:
"operation not allowed [...] neither user 2000 nor current process has android.permission.GRANT_RUNTIME_PERMISSIONS."
Be sure you enabled TWO settings in Developer Options :
USB Debugging
USB Debugging (Security Settings)
Good luck!
Click to expand...
Click to collapse
Thanks, found that two days ago! Now it's fine
virgil31 said:
"operation not allowed [...] neither user 2000 nor current process has android.permission.GRANT_RUNTIME_PERMISSIONS."
Be sure you enabled TWO settings in Developer Options :
USB Debugging
USB Debugging (Security Settings)
Good luck!
Click to expand...
Click to collapse
Thanks man. It was giving me issues on Android Pie
[GUIDE] Enable VoLTE + VoWiFi for German and other EU carriers on the Oneplus 6T running LineageOS 17.1
Requirements:
- Phone must be rooted
- A computer running Windows to connect your phone with (Also tested Windows 7 running in Virtualbox)
- Qualcomm USB Driver (Downloadlink)
- Qualcomm PST Tool (Downloadlink)
- ADB
IMPORTANT: This can break your phone! Make a backup of your EFS Partition! This can be done with TRWP.
1)
Download and install Qualcomm USB Driver and PST Tool on your computer. Make sure, you have the adb tool as well.
2)
On your phone activate the hidden developer settings:
Settings -> About -> Build-Number (press it multiple times)
then
Settings -> System -> Devloperoptions
Activate:
Android-Debugging
Local Shell
Connect your phone to your computer.
3)
Open a shell on your computer and type:
Code:
adb shell
Watch your phone to accept the incoming connection from your computer.
Type:
Code:
su
and watch your phone again to accept root access.
Activate the Diagnostic Mode by typing:
Code:
setprop sys.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb
Your phone will disconnect from adb, but thats ok.
4)
On your computer open "PDC" from the installed QPST application as admin.
In the device list, select your phone.
In the upcoming list look for "Oversea-Commercial_DS", right click it and deactivate Sub0 and Sub1
Click "Oversea-Commercial_DS" again and press the Remove button.
Close the PDC Tool and open it again.
Select your phone again
Look for Telefonica_UK_Commercial, right click and SetSelectedConfig for both Sub0 and Sub1
Click on Telefonica_UK_Commercial again and click the Activate button
Close the application
5)
Unplug your phone and reboot it.
Make sure you have activated VoLTE/VoWiFI in your settings.
6)
No VoLTE/VoWIFI icon is shown in the status bar. You can check the IMS status as followed:
Open the dialer and enter the code: *#*#4636#*#*
This will open the Testing menu. Select the first entry "Phone information".
In the option "Select phone index" you can choose your sim card you want to get information about.
Then, press the three dotted menu in the upper right and select "IMS Service Status"
If it says "IMS Registration: Registered" everything is working fine. Depending on whether you are on WiFi or LTE, "Voice over LTE" or "Voice over WiFi" will be shown as "Available as well.
Enjoy!
Great work. I'm on Linux. What is this qpst and psd tools for exactly and is there a way to do the changes from Linux?
Termehansen said:
Great work. I'm on Linux. What is this qpst and psd tools for exactly and is there a way to do the changes from Linux?
Click to expand...
Click to collapse
I'm on Linux too. Qpst is a USB Modem driver and PSD is a Tool to access and alter the modem firmware on the phone.
Unfortunately these will only run on Windows. I used VirtualBox and run Windows 7 (I bought a cheap license key some time ago) on it.
So none of these tools could be helpful?
https://github.com/openpst
Termehansen said:
So none of these tools could be helpful?
https://github.com/openpst
Click to expand...
Click to collapse
Interesting, I didn't know these tools. Maybe it could work.
Thank you for the guide. Still, I think you have a typo:
Sayonara123 said:
Code:
setprop sys.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage ,adb
Click to expand...
Click to collapse
There's a space preceding ',adb', and with blindly using this command something went wrong on my Windows PC. Had to restart. 'setprop' also supports only 2 arguments.
Another thing:
Sayonara123 said:
Remark:
I did not test it, yet. But you may have to repeat the procedure after every LineageOS update.
Click to expand...
Click to collapse
You should put that on top, maybe make it bold and set a bigger font. It looked like a tested and working method, I just blindly followed the instructions without questioning (also a mistake on my part).
Anyway, I followed the steps successfully but cannot see if VoLTE/VoWifi is functional as there is not indicator in LineageOS 17.1. If anyone knows a way, feel free to tell.
Thanks again.
Thank you for your reply.
martin.42 said:
Thank you for the guide. Still, I think you have a typo:
Click to expand...
Click to collapse
You are right, It's a typo, I didn't notice. Fixed it.
Another thing:
Click to expand...
Click to collapse
The whole procedure was tested on my own phone. There was just one unclear thing, whether these changes survive an update of the LineageOS system. It does! So I removed this obsolet remark.
Anyway, I followed the steps successfully but cannot see if VoLTE/VoWifi is functional as there is not indicator in LineageOS 17.1. .
Click to expand...
Click to collapse
Yes, it's a pitty there's no indicator in the status bar. I've found another way to check functionality and added it to the guide.
Hope this make things more clearly.
Thx
Tried it on stock oos 10.3.6, and windows 10. Have swedish carrier Tre (Hallon).
Works great! Thanks for your guide! ?
Procedure fails on OP6 with LineageOS20, phone is not visible in PDC.