here the gpu clock is 1420mhz. how can I do that
KonaBess apk
kpykpy said:
KonaBess apk
Click to expand...
Click to collapse
yes mate i made it using this. So does this really make a visible difference?
bencozzy said:
No one else has been playing around with this?
Click to expand...
Click to collapse
Now that I know this exists, I will be playing with it
I have edited the settings for the 865 sdm. I added two new frequencies as 670mhz and 865mhz. two voltages in the same way. and set the temperature partition to 670mhz. I'm just playing pubg. Maximum system temperature 44 degrees in a game of 25 minutes. it was 42-43 degrees in old stock settings. I haven't had a problem for two weeks with only two streams of difference. but I don't know what will happen in the future.
This is insane...
800Mhz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vagenrider said:
This is insane...
800Mhz
View attachment 5269549
Click to expand...
Click to collapse
config?
kpykpy said:
config?
Click to expand...
Click to collapse
800Mhz at L2 volt mate..
here is my results...raised 930Mhz at L3 and when applied screen something like flashing randomly..i drop to 890 and bench crash few minutes later..i set up 870Mhz at L2 and it is pretty solid stable with temps around 40-50.
really surprised me that adreno 650 have so super abilities.
i made up some rounds just for the ranking
bencozzy said:
EDIT** Doesn't work for me.
What are your ram clock speed at?
Click to expand...
Click to collapse
mate I have not made any ram editing
Works on Poco X3 Pro ?
astronomy2021 said:
Works on Poco X3 Pro ?
Click to expand...
Click to collapse
I also want to know, did you find anything about?
TheKaikera said:
I also want to know, did you find anything about?
View attachment 5321149
Click to expand...
Click to collapse
First, we download the current version from the releases section of the app from github page.
You must register to see the links.
2. We install the app, grant Root access and open the app.
3. First of all, we click BACKUP OLD IMAGE and back up our stock boot image. The backup boot image you receive when you click will come to your phone's main memory. If you flash this boot.img image as an image from recovery when you have problems, it will return to its original state.
4.Then we click on THE GPU FREQ TABLE and select what your processor is from the list.
5. We click on the New section and click on the new frequency.
6. Here we click Frequency and change the first 3 values. So if the phone's stock max GPU speed frequency is 675 mhz, we make the first three digits 692 without touching the zeros and click SAVE GPU FREQ TABLE.
Now we're throwing a voltage level at this new frequency.
7. We click on THE GPU VOLT TABLE, click New and click on the new frequency.
8. In the same way that we enter the new frequency value(692)from the Frequency section, where we set the first 3 values. Then we click Voltage Level and select SVS_L2 from the list.
9. Finally, we click SAVE GPU VOLT TABLE and click REPACK AND FLASH NEW IMAGE on the top left.
Now your phone will automatically ask if you want to do the transactions and reboot. Yes click and reboot. That's all the transactions...
If you want to use this new frequency optimally, you should set the GPU governor to simple_ondemand or performance with any kernel manager
application. This ensures maximum performance, but as I said, it's good to use cooling during long sessions.
astronomy2021 said:
First, we download the current version from the releases section of the app from github page.
You must register to see the links.
2. We install the app, grant Root access and open the app.
3. First of all, we click BACKUP OLD IMAGE and back up our stock boot image. The backup boot image you receive when you click will come to your phone's main memory. If you flash this boot.img image as an image from recovery when you have problems, it will return to its original state.
4.Then we click on THE GPU FREQ TABLE and select what your processor is from the list.
5. We click on the New section and click on the new frequency.
6. Here we click Frequency and change the first 3 values. So if the phone's stock max GPU speed frequency is 675 mhz, we make the first three digits 692 without touching the zeros and click SAVE GPU FREQ TABLE.
Now we're throwing a voltage level at this new frequency.
7. We click on THE GPU VOLT TABLE, click New and click on the new frequency.
8. In the same way that we enter the new frequency value(692)from the Frequency section, where we set the first 3 values. Then we click Voltage Level and select SVS_L2 from the list.
9. Finally, we click SAVE GPU VOLT TABLE REPACK AND FLASH NEW IMAGE on the top left.
Now your phone will automatically ask if you want to do the transactions and reboot. Yes click and reboot. That's all the transactions...
If you want to use this new frequency optimally, you should set the GPU governor to simple_ondemand or performance with any kernel manager
application. This ensures maximum performance, but as I said, it's good to use cooling during long sessions.
Click to expand...
Click to collapse
Thanks, I will test it, I saw it in other places using 692 mhz but can I go further than that in the poco x3 pro? I don't see that much advantage from 675 to 692mhz
TheKaikera said:
Thanks, I will test it, I saw it in other places using 692 mhz but can I go further than that in the poco x3 pro? I don't see that much advantage from 675 to 692mhz
Click to expand...
Click to collapse
No all 855+ devices can't not go higher that 692 MHz. 692 Mhz overclock + underclock with lowest power consumption by almost 1 W and lowest temperature 2-5 C so with performance governor fo cpu you are looking for best performance.
You can change timings of memory in FREQ TABLE you can experiment betewen 4-9 with ddr7 and ddr8 bus freq.
Change Drivers in developers options to System Drivers you will gain another 1-2 %
But the biggest change is to remove thermal limit of 860 with magisk module " Thermal Unlocker 855 " and F2FS Optimizer(incease reading speed by +50% ) and kernel optimizer.
Settings for kernel :
[SmartPack-Kernel Manager] (v16.3) CPU Prime/Big/Little Cluster Max/Min Frequency: 2956/844 2419/710 1804/300
CPU Governor: Performance/Performance/Performance
CPU Hotplug Minimum
CPUs big: 3 Busy
Down Threshold: 0 Busy
Up Threshold: 100
Task Threshold: 1 (Default) Offline Delay: 100ms
GPU Max/Min Frequency: 692/692mhz (Default) GPU Governor: performance GPU Power Level: 0 (Default)
I/O Scheduler Sheduler: cfq
Read-Ahead: 8192kB
Rotation Storage: Enabled
I/O Stats: Disabled
Add Random: Enabled
RQ Affinity: 2
No-Merges: 2
NR Requests: 128
Read-Ahead: 8192kB
Rotation Storage: Enabled
I/O Stats: Disabled
Add Random: Enabled
RQ Affinity: 2
No-Merges: 2
NR Requests: 128
[Ex Kernel Manager] (v5.59)
CPU Settings Max/Min Cores Online: 4
(Cluster 1) Up/Down threshold: 100/0 Max/Min Cores Online: 3 (Cluster 2)
Up/Down threshold: 100/0
Thermal Profile: Evaluation Max/Min GPU Frequency: 692/692mhz
(Default) GPU initial frequency: 692mhz (Default)
astronomy2021 said:
First, we download the current version from the releases section of the app from github page.
You must register to see the links.
2. We install the app, grant Root access and open the app.
3. First of all, we click BACKUP OLD IMAGE and back up our stock boot image. The backup boot image you receive when you click will come to your phone's main memory. If you flash this boot.img image as an image from recovery when you have problems, it will return to its original state.
4.Then we click on THE GPU FREQ TABLE and select what your processor is from the list.
5. We click on the New section and click on the new frequency.
6. Here we click Frequency and change the first 3 values. So if the phone's stock max GPU speed frequency is 675 mhz, we make the first three digits 692 without touching the zeros and click SAVE GPU FREQ TABLE.
Now we're throwing a voltage level at this new frequency.
7. We click on THE GPU VOLT TABLE, click New and click on the new frequency.
8. In the same way that we enter the new frequency value(692)from the Frequency section, where we set the first 3 values. Then we click Voltage Level and select SVS_L2 from the list.
9. Finally, we click SAVE GPU VOLT TABLE and click REPACK AND FLASH NEW IMAGE on the top left.
Now your phone will automatically ask if you want to do the transactions and reboot. Yes click and reboot. That's all the transactions...
If you want to use this new frequency optimally, you should set the GPU governor to simple_ondemand or performance with any kernel manager
application. This ensures maximum performance, but as I said, it's good to use cooling during long sessions.
Click to expand...
Click to collapse
Please, help me!
Why can't I activate Rog 3 overclocking changes - ZS661ks (Tencent Games) - Android 10 - Global Firmware WW....147 by Konabess, neither in the original kernel nor in this Kirisakura 2.2.5 kernel, without bootlooping ?
-> with bootloader unlocked
-> with TWRP recovery
-> with Magisk root (24.1)
-> with Konabess +0.16
Are there any others locks or blocks I need to remove first?
Rfranca.bh said:
Please, help me!
Why can't I activate Rog 3 overclocking changes - ZS661ks (Tencent Games) - Android 10 - Global Firmware WW....147 by Konabess, neither in the original kernel nor in this Kirisakura 2.2.5 kernel, without bootlooping ?
-> with bootloader unlocked
-> with TWRP recovery
-> with Magisk root (24.1)
-> with Konabess +0.16
Are there any others locks or blocks I need to remove first?
Click to expand...
Click to collapse
Why do use Android 10 ? I recommend updating to A11 and should work.
astronomy2021 said:
Why do use Android 10 ? I recommend updating to A11 and should work.
Click to expand...
Click to collapse
Thanks astronomy2021 !
Finally.. even keeping Android 10, I got some access to be able to change the Frequency Table via Konabess apk
=> However, the maximum frequency I can raise is only up to 683Hz. Above this value it goes back into bootloop.. either at any voltage level (Nom_L1; Nom_L2; Nom_L3)
So, could someone please give me some guidance on why I can't get past the 683Hz limit?
Could it be because of the Kernel?
Rog 3 - ZS661KS (Tencent Games)
Android 10
ROM Stock - Global Firmware WW....147
Konabess +0.16
Kirisakura Kernel 2.2.5
Rfranca.bh said:
Thanks astronomy2021 !
Finally.. even keeping Android 10, I got some access to be able to change the Frequency Table via Konabess apk
=> However, the maximum frequency I can raise is only up to 683Hz. Above this value it goes back into bootloop.. either at any voltage level (Nom_L1; Nom_L2; Nom_L3)
So, could someone please give me some guidance on why I can't get past the 683Hz limit?
Could it be because of the Kernel?
Rog 3 - ZS661KS (Tencent Games)
Android 10
ROM Stock - Global Firmware WW....147
Konabess +0.16
Kirisakura Kernel 2.2.5
Click to expand...
Click to collapse
It because of Qualcomm lock frequency one to 683MHz even Poco F3 and most of all Snapdragon 870 are lock.
Related
The Ace Kernel-OC/Non-OC
FEATURES
Two versions-OC/Non-OC in single installer(Amarullz aroma installer).
Cleancache and frontswap support.
3 new frequencies to the overclocked kernel between 480 and 787 Mhz,i.e.,604,672 and 729.
Frequencies supported-OC-Version
122,200,245,320,480,604,672,729,787,806,825,844,864,883,902,921,940,960.
Frequencies supported-Non-OC-Version-
122,200,245,320,480,604,672,729,768,800
.Customizable governor adding and enabling/disabling logcat during install.
Total 19 cpu governors-
13-Default
Intellidemand
Smartass
Savagedgen
Smartass2
Scary
Performance
Lagfree
Interactive
InteractiveX
Brazillianwax
Ondemand
Conservative
6-Modules
Userspace
Powersave
ondemandx
lionheart
lazy
minmax
Ext4 patches from linux 3.0 kernel
Lib sha1 patches for 10% faster boot
6 I/O Schedulers-noop as default-Others being Deadline,SIO,VR,BFQ and CFQ.
Two way call recording.
Various performance improvements and battery life optimizations to the kernel.
BLN/TUN/CIFS/ZRAM
Some bug fixes
Disabled some logging and debugging options including logcat to improve battery life.If you require logcat you can enable it at boot time through amarulz installer.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
INSTALLATION
Download the zip from download section on project page as stated below on second post, put it in sdcard, reboot into clockworkmod recovery .Follow instructions in amarulz installer.Select OC/Non-OC.Select the next options(Governors/Logcat enable/disable).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
WARNING! CARELESS OVERCLOCKING MAY FRY YOUR PHONE.SO USE WITH CAUTION. I AM NOT RESPONSIBLE FOR ANY DAMAGE!
SOURCES
https://github.com/akashnk/android_kernel_samsung_cooper
Click to expand...
Click to collapse
DOWNLOADS
Latest Version-http://code.google.com/p/the-ace-kernel/downloads/detail?name=TheAceKernel-beta4.zip
All Downloads-http://code.google.com/p/the-ace-kernel/downloads/list
SOURCES
The linux kernel is under GPL.Whoever modifies it must share source code.
My sources-https://github.com/akashnk/android_kernel_samsung_cooper
http://code.google.com/p/the-ace-kernel/source/browse/#git%2Fsamsung_kernel_cooper
CHANGELOG
Code:
03/05/12-vBeta4
1.Added and enabled cleancache and frontswap.
2.Rewrote battery code again.
3.Added bfq i/o scheduler.
4.Enabled ksm.
5.Speed up access to cgroupfs mounted entries in /proc/mounts.
6.mmc: core: Fix possible race between runtime suspend and runtime resume.
25/04/2012-vBeta3.1
1.Deep sleep not working on wifi on should be fixed.
2.Modified lulzactive to tegrak lulzactive.
Lulzactive app from market working.
23/04/2012-Beta3
1. Add 3 more governors 13 default and 6 as modules.
2. Ext4 patches from linux 3.0 kernel.
3. change page writeback values.
4. Dm cache enabled
5. Lowered VDD levels of frequencies below 672 Mhz.
6. Add lib sha1 patches for 12% faster boot time.
7. Added ARM CPU topology
8. Fixed USB Tethering
9. use Amarulz installer script installer script.
10.Compiled wifi driver from ar6ksdk 3.0 source.
11.Disabled fsync.
12.Fixed memory leaks.
20/04/2012-Beta2
1.Optimized rcutree-better application responsiveness.
2.Added 3 governors-Intellidemand,Interactive and InteractiveX...Recommend Intellidemand for balanced battery and performance.
3.Removed some changes to drivers.
4.Performance update-removed some bugs and optimize more for performance.
18/04/2012-Initial Release
-Compiled from Samsung Kernel sources using Sourcery G++ Lite
-13 governors and 5 I/O schedulers
-3 new frequencies to overclock code in frequency table between 480 and 787 Mhz.
-Rewrote battery driver code(Thanks Anonymous and LibSc)
-Performance optimisations.Disabled some logging and debugging
-Added 2 way call recording
CREDITS
-Ketut Kumajaya for his source patches.
-Anonymous for his source patches.
-Developers of various kernels like SpeedMod,FreeXperia,Phiexz,TomGiordino etc. and their sources
-Code aurora
-Amarulz for the installer.
-LibiSC for formula showing correct mV
-Samsung for Source Code
-Google for Android.
FAQS
Why is logcat disabled and how do I enable it?
Logcat is a useful service to log and find out whats wrong with the system.But it runs even when it is not required
and eats battery.So I compiled it as module and disabled it by default.
You can enable it at boot by installer
or
To make it permanent Download This script here http://dl.dropbox.com/u/18323177/logcat-enabler.zip and flash it via cwm. If you want to delete it again just delete 37logcat
from /system/etc/init.d.
Click to expand...
Click to collapse
About Governor Modules?
Modules can be selected at boot which can be deleted from /system/etc/init.d later.
or
Governor modules can be loaded in the same way as other module.They are in /system/lib/modules.
e.g.- insmod /system/lib/modules/cpufreq_lionheart.ko
Remove modules
e.g.- rmmod /system/lib/modules/cpufreq_lionheart.ko
Click to expand...
Click to collapse
Why some can overclock to 921 Mhz and some only to 864 Mhz and others different frequency?
Every CPU is unique.The CPU may go upto different frequencies but they were tested for stability at a common 800 Mhz Frequency
only.
Click to expand...
Click to collapse
How to Overclock,Change Schedulers and Governors
You can use apps like No Frills CPU Control,SetCPU,CM settings or write some script yourself
Click to expand...
Click to collapse
What all these governors and schedulers do and how do I know what to use?
Have a look here
http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
First WOW! new Cm kernel
Sent from my GT-I9100 using xda premium
future may be
Welcome back! Will try your kernel
Excellent work
Cool.. will try..
Sent from my GT-S5830 using XDA
Nice work
Cool, hope it does something with the battery life
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
dredremon said:
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Click to expand...
Click to collapse
As stated in FAQ different phones will be stable at different frequencies.
encik_racun said:
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
Click to expand...
Click to collapse
I need your feedback. I intend to increase battery life.
Testing now
Sent from my GT-S5830 using Tapatalk
Testing.
Sent from my GT-S5830 using xda premium
Who has tested?
Battery seems a little more consistent, percentage is not fluid thoug (eg 100% -> 91 in around 5 minutes of browsing on wifi).
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Quadrant score?
Sent from my GT-S5830 using xda premium
dragonnn said:
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Click to expand...
Click to collapse
I have used some parts of both anonymous and ketut sources and also other sources .
It is not about "looking better".It is about running at real frequency steps.Our Phone does not really run at 800 Mhz but at 787 Mhz.
On a stock Galaxy Ace the CPU gets its clock from different PLL's using dividers. Our device has 3 PLL's running at 245(PLL1), 960(PLL0) and 800(PLL2) MHz. The 480MHz step is using PLL0 divided by 2 and the "800MHz" step uses PLL2 divided by 1.
But this is not all.The PLL speeds are configured with a multiplier that can be configured up 63 (6-bits) and it multiplies with a clock called PLL_TCXO which runs at 19.2MHz. On the Galaxy Ace PLL2 is configred as 41*19.2MHz which means it really isn't running at 800MHz but rather at 787.2MHz.
The same applies for other speeds.
I made this for man to discuss about making a CM kernel for S5570I
It have the same hardware with glx y,like a glx y with different screen size,can use any stock rom of glx y without any modify
Sir hell lock plz post any thing u need help here
Hope this will bring bright to the future of s5570i
I will update this post once i know st new
First all. You can't port ROM without changing Kernel, Keys, and libs. About kernel... hmm... if i have this device i would make one. Cause Pop Plus have 832 Mhz Processor, can OC up-to a Giga-Hertz (Maybe), this phone is NEXT generation of Mini :highfive:
claudiotimo said:
Wow! if you can do that you'll be my god xD . However galaxy mini plus have the same hardware as galaxy y we can ports roms of it, we ony need a cm kernel and possibility for overclock.
Click to expand...
Click to collapse
How about stock kernel but with OC Support ?
Eyes on it. It would be interesting and probably all s5570i owners will pray
I am intrested to in one of those kernels. One that is capable to OC ( up to 1Ghz/or something there) to underclock to 156Mhz ( or something like this) and to undervolt. This can be posibble, right?
F4uzan said:
How about stock kernel but with OC Support ?
Click to expand...
Click to collapse
Can you make one for us (owners of s5570I device) ?
bogdan99999 said:
I am intrested to in one of those kernels. One that is capable to OC ( up to 1Ghz/or something there) to underclock to 156Mhz ( or something like this) and to undervolt. This can be posibble, right?
Click to expand...
Click to collapse
bogdan99999 said:
Can you make one for us (owners of s5570I device) ?
Click to expand...
Click to collapse
UV = Can't be done, somehow the stock kernel are un-voltable (lol, or i was lazy, don't know)
OC = Working on it, since i don't have the device. I test it on my brother Mini Plus, so i will need he got back from school.
Also, OC cannot reach a Giga Hz (1 Ghz), i can only limit it into 982 Mhz, i got 1 Ghz working but it just reboot. On 9xx Mhz it got very hot. On 8xx i got it stable.
So you set OC max freq to 8xx or you let it to 9xx? UC can go down to 1xx? It has ondemand, powersave or smartass v2 scaling on it? "thanks" for helping us
F4uzan said:
UV = Can't be done, somehow the stock kernel are un-voltable (lol, or i was lazy, don't know)
OC = Working on it, since i don't have the device. I test it on my brother Mini Plus, so i will need he got back from school.
Also, OC cannot reach a Giga Hz (1 Ghz), i can only limit it into 982 Mhz, i got 1 Ghz working but it just reboot. On 9xx Mhz it got very hot. On 8xx i got it stable.
Click to expand...
Click to collapse
One dev of our said that under 356mhz can cause reboot then he remove that frequence and the kernel with less frequence but not get reboot
One more,i think the 832mhz working very well,a bit lag but good. Now we need a cm kernel to boot the cm7,hell lock was busy cant help
832 is the default value of freq. it cant lag into that freq. Under 312 it can go into sleep of death ( or something like that ) i dont think it can reboot into that freq.
bogdan99999 said:
832 is the default value of freq. it cant lag into that freq. Under 312 it can go into sleep of death ( or something like that ) i dont think it can reboot into that freq.
Click to expand...
Click to collapse
The freq under 312 causes random reboot
When can you post your work on this kernel that all we waiting for?
Now fixing the OC.
Finally. My Brother are going to his University in US. So i can't meet his Mini Plus until 2014, so sorry everyone.
Here's my last untested work :
1. Fixed OC
OC Up to 1031 Mhz (My brother Mini Plus stable up to 972 Mhz)
2. Undervolted
3. Governors Support :
smartassV2, smartass, MiniX Plus, ondemand, ondemandx, userspace, lionheartX, lionheart, performance, powersave, CPUMaster, etc...
4. I/O Support :
noop, sio, etc...
Tested and Working :
1. OC Up-To 972 Mhz (it's hot !)
2. smartassv2, smartass, and ondemand Governor (other governor are almost make me crazy)
3. noop only I/O
Another features :
1. New Bootsplash by flowish
2. ReNamed kernel version (3.0.8, hehe... )
3. Fixed battery drain
4. Fixed lags in 832 Mhz (thanks to Flowish for his Chocobread)
5. Fixed performance, now 832 Mhz feels like a Giga Hertz (1 Ghz)
6. No Bootanimation (Fastest boot i ever had in Mini Plus)
7. No more fancy things (Improve performance)
Downloads :
1. GigaBoot Kernel (Later... sorry, have no time)
2. PerformanceMaster Kernel (Untested, have 99.00 % Brick chance)
3. Fancy Kernel (Have no time to upload)
so wich one if those 3 kernels is the one that you sugest us? wich one is capable to do everything that you have mention above? Thanks you for doing this kernel.
bogdan99999 said:
so wich one if those 3 kernels is the one that you sugest us? wich one is capable to do everything that you have mention above? Thanks you for doing this kernel.
Click to expand...
Click to collapse
Read new features above !
Merged Performance + Fancy Kernel into EveryDriver Kernel
Currently doing my homework.
Have new features above ! :
GigaBoot Kernel
1. Performance :
Overclock up-to 1 Ghz
Fixed battery drain
Fixed UV
Fix lags
zRam Enabled
Swap enabled
2. Appareance :
ICS Transition animation (Horizontal Animation), lightweight transition too !
No bootanimation by default
Fixed graphic glitch
EveryDriver Kernel
1. Performance :
Overclock up-to 900 Mhz for daily driver
Fixed battery drain
Fix lags
Swap Enabled
2. Appareance :
JB Transition animation (Vertical Animation)
Fixed Graphic glitch
Better 3D Graphics
Better transition
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will try gigaboot kernel after you post links for downloading. I guess it is stable now, right?
Android_United said:
Click to expand...
Click to collapse
What about facepalm ?
Kernel it's not really stable yet. Since it's untested, also my broadband are suck. I only have 300 Mb left. 300 Mb it's only for syncing repo and updating my Ubuntu.
claudiotimo said:
Can you upload the 1 ghz kernel?? Please.. *___*
Sent from my GT-S5570I using xda app-developers app
Click to expand...
Click to collapse
Can't, my internet only left 190 Mb. My Mom will angry at me if i use it for Android.
[KERNEL][3.4.5][Sandy Kernel V 1.1] for Micromax A250
First Custom Kernel for Micromax Canvas Turbo
WARNING:
Code:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
FEATURES :
As of now basic features added. Will keep updating new version regularly.
Based on Blu life One x source
LZMA Compression for zImage and Gzip for ramdisk.
MTK Vermagic Hack
Optimized ARM algorithm ( Credits to @faux123 )
Governors added :
Smartass2
Nightmare
Pegasusq
Sakuractive
Intellidemand
Performance
Powersave
I/O schedulers added :
SIO
Fifo
Fiops
Row
Vr
Zen
Sioplus
Click to expand...
Click to collapse
Use Trickster mod App to change governors. For more detailed review on governors read post #3
Installation instructions :
Copy zip to your Sd card / Internal memory
Install zip
Reboot :laugh:
DOWNLOADS :
V 1.1 : http://d-h.st/M5y
OLDER VERSIONS
V 1.0 : http://d-h.st/Jzq
CREDITS :
@kashifmin for his support and guidance
@suhas.holla for his support
Couple of A250 guys for testing it
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel sources :
https://github.com/sandymanu/CM11_a250_kernel
XDA:DevDB Information
[KERNEL][3.4.5][Sandy Kernel V 1.1] for Micromax A250, Kernel for the Micromax Canvas Turbo A250
Contributors
Santhosh M
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2014-06-27
Created 2014-06-27
Last Updated 2014-08-01
FAQ's on Kernel :
What is a kernel? Why should I install it?
A: Click here to know the answer.
Will this work on all MT6589 / 6589T Phones?
A: NO
Is this kernel compatible with all ROMs?
A: This kernel works for all stock based ROM's. Non stock ROM's replace ramdisk.
Will this work on other clones of these devices such as Blu life One X ?
A: YES. It will work
Is this kernel recommended for daily use?
A: Yes!
What are the best governor+io combinations?
A: Hotplug+cfq, Smartassv2+cfd, Sakuractive+cfq. You can give me feedback on the thread so that others can know.
Governors explained
Explanation on Governors :
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Sakuractive:
This driver mimics the frequency scaling behavior in "on demand" but with several key differences. First is that frequency transitions use the CPUFreq table directly, instead of incrementing in a percentage of the maximum available frequency. Second "sakuractive" will offline auxillary CPUs when the system is idle, and online those CPUs once the system becomes busy again. This last feature is needed for architectures which transition to low power states when only the "master" CPU is online, or for thermally constrained devices
ZZmoove
ZZmove Governor optimized for low power consumption with the screen off, with particular attention to the limitation of consumption applications in the background with the screen off, such as listening to music. It has three settings: battery saver, balanced and performance. In addition to a performance boost, there is also the governor zzmove optimized.
Pegasusq/Pegasusd
The Pegasus-q / d is a multi-core based on the Ondemand governor and governor with integrated hot-plugging.
Ongoing processes in the queue, we know that multiple processes can run simultaneously on. These processes are active in an array, which is a field called "Run Queue" queue that is ongoing, with their priority values arranged (priority will be used by the task scheduler, which then decides which process to run next).
To ensure that each process has its fair share of resources, each running for a certain period and will eventually stop and then again placed in the queue until it is your turn again. If a program is terminated, so that others can run the program with the highest priority in the current queue is executed.
SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
Reserved
Great Work Bro ..... :good::good::laugh::laugh:
First ever custom kernel for A250 .... Development for A250 taken to a new level :good:
nrupesh2912 said:
Great Work Bro ..... :good::good::laugh::laugh:
First ever custom kernel for A250 .... Development for A250 taken to a new level :good:
Click to expand...
Click to collapse
Thanks bro
Sent from my Micromax using Tapatalk
Finally First Custom Kernel For our Canvas Turbo ...U made it happen .. @Santhosh M ..Just Awesome
suhas.holla said:
Finally First Custom Kernel For our Canvas Turbo ...U made it happen .. @Santhosh M ..Just Awesome
Click to expand...
Click to collapse
Thanks a lot bro Will keep it updating
Hi,
Sorry to ask a noob question. I am using stock rom v4, i have downloaded this kernal.and tried to install with CWM (stock cwm). But error "installation aborted". I have changed the zip name to update.zip, but same error. Am i doing anything wrong?
sai.suri1983 said:
Hi,
Sorry to ask a noob question. I am using stock rom v4, i have downloaded this kernal.and tried to install with CWM (stock cwm). But error "installation aborted". I have changed the zip name to update.zip, but same error. Am i doing anything wrong?
Click to expand...
Click to collapse
Dunno where you are making error ! Download it freshly and put it inside root of internal storage/ SD card. ( Don't touch/edit anything in zip ).
Just boot to CWM and install zip. All should be okay
I'm using stock recovery. I think i should use custom recovery. What do u say?
sai.suri1983 said:
I'm using stock recovery. I think i should use custom recovery. What do u say?
Click to expand...
Click to collapse
What...OMG !!! Stock recovery isn't cwm recovery. Its called 3e recovery. CWM is custom recovery. First install cwm.
Ok. Installed recovery- TWRP. And flashed kernal. Now testing. Will give u fead back.
Edit:
I'm using hotplug. Does it gives good battery backup.
Great job @Santhosh M, I'm using the kernel with Purexperia Z2 on my Wiko Darkfull and so far everything is operating ok. I'll test a few more days to give feedback.
best regards
EDIT: im testing it with smartass v2 + cfq
sai.suri1983 said:
Ok. Installed recovery- TWRP. And flashed kernal. Now testing. Will give u fead back.
Edit:
I'm using hotplug. Does it gives good battery backup.
Click to expand...
Click to collapse
Hotplug is the default even in ur stock kernel. Use any other by reading about governors
V 1.1
V1.1 released with newly added schedulers and optimized ARM algorithm
Antutu Benchmarks
Here is some results from Antutu Benchmark using Purexperia Z2 rom and Sandy Kernel v1.1 on Wiko Darkfull
Governor Hotplug
Click to expand...
Click to collapse
Governor Smartass v2
Click to expand...
Click to collapse
Governor Performance
Click to expand...
Click to collapse
Governor Lulzactiveq
Click to expand...
Click to collapse
I'm using lulzactiveq and my phone is flying. Later i will show the batery usage
FSadino said:
Here is some results from Antutu Benchmark using Purexperia Z2 rom and Sandy Kernel v1.1 on Wiko Darkfull
I'm using lulzactiveq and my phone is flying. Later i will show the batery usage
Click to expand...
Click to collapse
Thanks for the screenies & thanks for trying
Hi,
I am using stock rom v4 tweaked by mahendra. After flashing this kernal my mobile freezes some times. If i use hotplug governor, nothing will happen. If i change the governor after some time it will freeze. Then i have to force it to restart. Most of the times it freezed when i opened what's app. Sorry, i forgot which governor i have used.
Thanks.
sai.suri1983 said:
Hi,
I am using stock rom v4 tweaked by mahendra. After flashing this kernal my mobile freezes some times. If i use hotplug governor, nothing will happen. If i change the governor after some time it will freeze. Then i have to force it to restart. Most of the times it freezed when i opened what's app. Sorry, i forgot which governor i have used.
Thanks.
Click to expand...
Click to collapse
It's because of that ROM ( Tweaked Stock ROM). You should flash only on stock ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the original HTC kernel for Butterfly s My Butterfly S project stops here.
Today I changed the rear camera (due to the purple issue), and after I closed the phone no way to switch it on, I reopened the shell and after a long search I've found a little flat cutted (the one fron the power on button).
It means to change the mainboard, and I have no intention to make this job.
Just wanna say thanks to anyone who wrote to me along this months.
Now I will move on m9.
Good luck and long life to Butterfly S, still one of the best phones.
Informations :
Stock 5.0.2 HTC Kernel rel. 3.4.10
Giampa's Kernel for Android 5.0.2
Source: GitHub
Compiler Toolbox: Linaro_arm-cortex_a15-linux-gnueabihf 4.7.4.
Kernel Version: 3.4.10
defconfig: dlxp_ul_defconfig
Supported Devices :
Daily use on DLXP_UL
DLXP_U you just try and let me know (got a few positive feedbcaks)
Supported Roms :
Still 100% working (compass too) on stock and modified ROM 5.16.709.4 (thanks to Migascalp)
About others ROMs you just try and let me know.
Features :
Wake gestures support.
GPU Overclock.
CPU Overclock.
USB Fastcharge.
ExFAT support.
Perflock removed.
Changelog :
Code:
1.0.0
- Initial release
1.1.0
- Added simple GPU Governor
- Added GPU Overclock
1.2.0
- Added CPU Overclock
- Added more CPU min frequncies
1.2.1
- Added SmartassV2 & Lulzactive CPU Governors
1.2.2
- Removed 2214 Mhz Overclock
- Changed voltage range to allow 2106 Mhz full operative
1.2.3
- Removed Back Button wakes the phone bug (what a fight!)
- Added USB Fastcharge
- Recompiled with Linaro
1.2.4
- Added advanced USB Fastcharge
- RAM optimization
- ExFAT support
1.2.5
- Perflock removed (bye bye, not gonna miss you)
- Wake gestures refined (more sensitive and now is possible to set sweep vibration)
Downloads :
in attachments
zImage_XXX: if you want to play with your own boot.img repacking
boot1_XXX.img: just flash it with fastboot: fastboot flash boot bootXXX.img
Don't forget to make a Nandroid backup before installing
Credits :
@xXminiWHOOPERxX - I really learned many things just exploring your kernel source code, 'twas a big inspiration for me.
@flar2 - You made a fantastic job with your Sweep2wake, Doubletap2wake & Wake Gestures.
@show-p1984 - You made a fantastic job with your Sweep2wake project and with your Ville perflock hack.
@Matrix}{ - For your competence.
To anybody who wants to start by himself to add wake gestures to a kernel I sugget to look at this Matri}{ commit:
AddWakeGestures
It's a perfect track for any beginner
Wake gestures support
You can manage them with Sense 6 Toolbox or Wake Gestures, both are Xposed Framework modules and Mr. Google will help you to find them.
GPU Governor & Overclock
At this point init.d support is a must, stock roms don't have it, I used "Universal init.d Support" from the market and it made its job to add the support.
To set the GPU max clock freq use the following lines in an init.d script (could be /etc/init.d/99bootGPU with 755 permissions)
Code:
echo XXXXXXXXX > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
chmod 444 /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
Values for XXXXXXXX are:
585000000 558000000 531000000 504000000 490500000 477000000 450000000 409500000 320000000 200000000 128000000
To set the governor use the following line:
echo "governortype" > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/pwrscale/trustzone/governor;
Values for "governortype" are:
simple
ondemand
performance
powersave
Let's test and feed back to me.
CPU Overclock & more CPU min. frequencies
Ok, this is a minefield, so I must be clear:
We are playing with Krait 300 CPU frequencies and voltage, apply these changes only if you have experience on this matter at your own risk and responsibility, I'm not responsible about any damage at your phone.
I added 2 overfrequencies:
1998 Mhz
2106 Mhz
and 4 minum frequencies:
81 Mhz
135 Mhz
189 Mhz
270 Mhz
You can set these values with SetCPU or 3C CPU Manager
System seem stable, but please test and feed back to me.
>1.2.2 shows a sensible performance improvement
SmartassV2 & Lulzactive CPU governors
You can set these values with SetCPU or 3C CPU Manager
Advanced USB Fast charge
There are two settings to play with in /sys/kernel/fast_charge/
- force_fast_charge:
0 - disabled (default)
1 - substitute AC to USB unconditional
2 - custom
- fast_charge_level
values to set are: 500 700 900 1100 1300 1500 (mA)
use an init.d script, I don't know if there are APKs who can manage these settings.
ExFAT
It's managed as module, so use it only if you need.
1) Copy exfat.ko in /system/lib/modules
2) Change permission in 664
3) add this line in your favourite init.d script: insmod /system/lib/modules/exfat.ko
My Antutu score
Reserved
thank you for sharing I test as soon
Envoyé de mon HTC One M9 en utilisant Tapatalk
Can work smoothly on insertcoins 7.0.7. Bravo new dev!
One thing found, compass not working under insert coins 7.0.7 rom.
dioooi said:
One thing found, compass not working under insert coins 7.0.7 rom.
Click to expand...
Click to collapse
Yep, and that's why Mini's Kernel has the same problem in stock ROM, different drivers between ROM and kernel.
If you agree I could try to share .ko modules compiled with kernel, to replace the ones in IC 7.0.7., just to try.
I'll do it soon.
Edit:
Ok, here are the modules, just unzip, push to /system/lib/modules and set permissions.
If 'twill work I'll add them to main post.
Thanks.
Slán!
foggydew88 said:
Yep, and that's why Mini's Kernel has the same problem in stock ROM, different drivers between ROM and kernel.
If you agree I could try to share .ko modules compiled with kernel, to replace the ones in IC 7.0.7., just to try.
I'll do it soon.
Slán!
Click to expand...
Click to collapse
Sure no harm to try!
Seems to work fine for me with stock modules.
Rom base 5.16.709.3 Sense 7 and Wake Gestures by @flar2
hi foggydew88,
any idea to add the GPU overclock option? can i just copy n paste from the elementalX GPU setting (build.config) into mini's kernel or your kernel? any corruption will happen?
shiropetto said:
hi foggydew88,
any idea to add the GPU overclock option? can i just copy n paste from the elementalX GPU setting (build.config) into mini's kernel or your kernel? any corruption will happen?
Click to expand...
Click to collapse
Reference to GPU I don't know, but for CPU oc there's to play with some driver under cpufreq and mach-msm, I'm still in research stage but 'twill be my next step, our phone is quite fast enough, but I would like the see its limit.
Slán!
Sent from my HTC Butterfly s
foggydew88 said:
Reference to GPU I don't know, but for CPU oc there's to play with some driver under cpufreq and mach-msm, I'm still in research stage but 'twill be my next step, our phone is quite fast enough, but I would like the see its limit.
Slán!
Sent from my HTC Butterfly s
Click to expand...
Click to collapse
For CPU overclock, stock speed best for me. Only GPU is my consideration. Because I playing some HD games between butterfly S n Note2 and found that graphic speed smoothly n better than butterfly S (check the spec between note2 n butterfly S, of coz butterfly S better). But, My Butterfly S playing any games also lag. Donno y...
Sent from my HTC Butterfly s using xda premium
You're right, I will check.
Added in the to do list
Sent from my HTC Butterfly s
hi foggydew88,
does this kernel support FAT32 or exfat?
shiropetto said:
hi foggydew88,
does this kernel support FAT32 or exfat?
Click to expand...
Click to collapse
FAT32 supported, exfat as module, as HTC standard defconfig.
when I press the back button not slide yet ,901e wake up, why? stock 5.0.2 rom use gp kernal. Button panel locks to s2w after this distance -> http://forum.xda-developers.com/showthread.php?t=2662415 I also have one x ,and flash the kernal ,there' no problem,i need to slide to second button,then the device wake up . Thanks for your effort to this kernal!!
kimi996 said:
when I press the back button not slide yet ,901e wake up, why? stock 5.0.2 rom use gp kernal. Button panel locks to s2w after this distance -> http://forum.xda-developers.com/showthread.php?t=2662415 I also have one x ,and flash the kernal ,there' no problem,i need to slide to second button,then the device wake up . Thanks for your effort to this kernal!!
Click to expand...
Click to collapse
In think it could be logo2wake related, the wake gestures driver that I used in this kernel is M7 derived, I will check.
Slàn.
kimi996 said:
when I press the back button not slide yet ,901e wake up, why? stock 5.0.2 rom use gp kernal. Button panel locks to s2w after this distance -> http://forum.xda-developers.com/showthread.php?t=2662415 I also have one x ,and flash the kernal ,there' no problem,i need to slide to second button,then the device wake up . Thanks for your effort to this kernal!!
Click to expand...
Click to collapse
I tried to solve this little annoying bug phishing lot of codes, from M7 (old versions too) bug remains, from OneX as you suggested code is too different (at least for my knowledge) and touchscreen wont work after code insertion.
Sorry but at this moment I spent too many time on it and no solution, but all the rest of wake gestures seems to work fine and I found no other bugs yet.
If someone has some idea or input on it I will be glad to restart to work on it, but now I will start to work on todo list.
Cheers.
Anyway, thanks for your help!!
Please fix bright screen when pressing the back button
Very strange, but installing v1.2.2 to 7.0.7 IC, phone on butanimation does not start ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for bricked devices, dead sd cards, explosions, nuclear wars, alarm applications getting failed, please read the first 3 posts (features, faq, settings) carefully before flashing this kernel to make sure everything goes well with your installation.
This kernel will focus on quality over quantity, I will add only those features which don't cause instability and really improve performance or battery life of our device. I like to test my changes properly before release and keep stability the topmost priority, I don't guarantee weekly or nightly builds, updates will be given whenever required.
Some Kernel Features-
Cpu Improvements -
Balanced, Battery and Gaming modes available for interactive governor
Mild undervolt for our cpu, reduces heat, helps battery backup
All basic governors and relaxed governors available, default is interactive
Toggles for wakeup boost, hotplug boost, touch boost
IO & Memory Improvements -
Added fiops, bfq, zen, maple, sio io schedulers
Disabled io crc check for more performance
Zram with lz4 & lz0 compression support available
NTFS, exFAT, F2FS, EXT filesystems support
Gpu/Display Improvements -
Fixed wrong gpu frequency reflected in sysfs
Optional enhanced color profile, choose while flashing
Adreno idler and adreno boost are available, off by default
Savoca's kcal color control, full control over colors
Wake gestures, dt2w, s2s and s2w for all panels
Charging/Battery Improvements -
Option to select 2000mA or 2400mA charging rates
Tuned interactive governor for better battery backup
Mild stable undervolt for both cpu and gpu
Optimizations for better load and power management
Other Improvements -
Sound control for speaker, earphones, mic etc
Option to select selinux mode while installing
Compiled with aosp 4.9.4 aarch64 toolchain
Fsync toggle available, enabled by default
Custom vibration intensity control available
Confirmed working or not working on -
Works on all lineage and aosp based nougat roms
Works on all lineage and aosp based marshmallow roms
Works on all MIUI 8+ marshmallow roms
Flashing Instructions -
Prefer flashing over your rom's stock kernel for best results
Read post #2 for some frequently asked questions
Download correct version of Radon kernel
Make backup of system, boot in twrp
Now, wipe dalvik cache and cache
Flash the kernel zip and reboot
Note - In case the kernel doesn't boot for you, restore your system and boot partition from twrp and you will not lose any data.
Stable build downloads -
Radon V6.3 Stable Builds ( Android 8.1.0, 7.1.2 & 6.0.1 )
Kernel control app -
Radon kernel control
If you like my work, consider donating -
Paypal
XDA:DevDB Information
Radon Kernel For Kenzo, Kernel for the Xiaomi Redmi Note 3
Contributors
Umang96, TheStrix, Balika011, ktomov, abhishek987
GuneetAtwal, MOVZX, franciscofranco, flar2
alex9yust, billchen1977
These are not in any specific order, please pm me If I missed anyone
Version Information
Source: Github
Status: Stable
Current Stable Version: V6.1
Created 2016-07-09
Last Updated 2017-12-10
Frequently Asked Questions -
Q ) I like this kernel, can I be a part and contribute to this project ?
It takes many hours to maintain this kernel, If you are a user then donations are appreciated. If you want to contribute to development then you can create your pull requests on my github or pm me with your patch.
Click to expand...
Click to collapse
Q ) I flashed this kernel, what next ? How and where do I configure kernel related settings ?
Recommended app is Radon kernel control, it offers very easy to use custom profile based tweaking, you may check post #3 for some tuning tips if you like to tune kernel settings yourself.
Click to expand...
Click to collapse
Q ) Read mode in miui is not working after flashing this kernel ?
Xiaomi hasn't provided the opensource code for this feature, so read mode is not going to work on custom kernels, but you can try going into display tab of radon kernel control app and make a custom profile with R,G,B(254,234,195) and saturation 40 for very similar experience to miui read mode.
Click to expand...
Click to collapse
Q ) My fingerprint doesn't work, what to do ?
Kenzo comes with two different sensors, fpc and goodix, all nougat roms have fixed support for both sensors, but if you use miui rom and you have goodix sensor then you might need to flash the patch from post #6196.
Click to expand...
Click to collapse
Q ) I flashed this kernel, but I want to return to my stock kernel, how to do that ?
If you read flashing instructions in first post, you will see that I asked you to make backup of boot and system partitions before flashing my kernel, now you can restore that backup and you will have your stock kernel back. In case you didn't take a backup, just dirty flash your rom zip without wiping data and that will restore stock kernel and modules.
Click to expand...
Click to collapse
Q ) How much battery backup does this kernel give ? Will it give me x hours of SOT ?
The battery backup depends a lot on your usage, like screen brightness, wifi, 3g/4g data. Changing your kernel or rom will not make battery backup double. If you are just wifi user, your device can give 9+ hrs screen on time. Heavy 3G, 4G, Bluetooth users shouldn't expect huge battery backup. Regarding battery consumption when display is off, I normally lose 2% battery for about 8-9 hours of standby, but if you you keep wifi and data off in night, then you should get 0-1% drain per night.
Click to expand...
Click to collapse
Kernel tuning tips -
Cpu -
Governor: Interactive for all kind of users, select battery/balanced/gaming mode while installing according to your need, balanced and gaming modes are totally smooth but battery mode might have little lags.
Users who wish to further push battery backup can try using relaxed cpu governor on small cluster, reducing max frequency of small cluster will also improve battery backup.
By default, I use these min cpu frequencies 691Mhz (small cluster) and 883Mhz(big cluster), there is also 400Mhz option but I don't recommend using that since it saves negligible battery.
Input boost and touch boost should be kept on by balanced/gaming users, battery biased users can consider turning them off.
Memory -
Adaptive lmk should be enabled by all users
Z-RAM 512MB with at least 40 swappiness
Z-RAM will increase battery consumption a little bit
Keep Z-RAM off if you need extra battery backup
IO Scheduler -
FIOPS for good performance and battery
Read ahead at least 512 KB on both internal and external
Screen -
Adjust this yourself, I don't know what you like.
Gpu -
Adreno idler - only battery biased users should keep this on.
Adreno boost - gamers or performance biased users should keep this on.
Misc -
Fsync -Enabled for more stability, disabled for more performance.
Vibration intensity - I use 60, select whatever you like here.
Note - All settings are compatible with Radon kernel control.
I am using RADON Kernel From very first Build and to be honest ,
RADON is Awesome In Performance , Super Smooth and Fully Stable Kernel.
It Rocks Redmi note 3 Development :highfive:
please bring the Over clock feature
Will try to boot it on mokee! Will update !
Edit : Doesnot boots on Mokee
Sent from my Redmi Note 3 using Tapatalk
biku123 said:
please bring the Over clock feature
Click to expand...
Click to collapse
Our phones performance is already great
No point in over clock.
Sent from my Redmi Note 3 using Tapatalk
picarito said:
Our phones performance is already great
No point in over clock.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Right, overclock is not useful unless you are using a low end or outdated device.
Umang96 said:
Right, overclock is never useful unelss you are using a low end device.
Click to expand...
Click to collapse
Are you using the stock frequency table?
Umang96 said:
Right, overclock is never useful unelss you are using a low end device.
Click to expand...
Click to collapse
Yes so please don't add over clock lol maybe any sound changes like faux sound or Franco sound? If it's possible of course.
Sent from my Redmi Note 3 using Tapatalk
Pls add Exfat support
Please consider adding color control and Intel gov and if possible Westwood TCP algorithm, since data is not stable in bsnl sim and radio of our device is also not perfect it would be useful.
Sent from my Redmi Note 3 using Tapatalk
Its the any posibility to add manual features to the camera by kernel?
Enviado desde mi Redmi Note 3 mediante Tapatalk
please add color saturation control support ,is it already there?? if not please add .Then only i will be able to use cm13 roms.:good:
@Umang96 Can u share the voltage for each frequency?
shubham tech said:
please add color saturation control support ,is it already there?? if not please add .Then only i will be able to use cm13 roms.:good:
Click to expand...
Click to collapse
That should not be the only reason to switch to cm13.cm13 is way superior than miui.
Sent from my Redmi Note 3 using Tapatalk
Umang96 said:
Cpu Big -
400 - 1747 Impulse
Cpu Small -
400 - 1401 Impulse
IO Scheduler -
BFQ on both external and internal
Read ahead 1024 on both
Click to expand...
Click to collapse
In official RR....minimum frequency is not staying in CPU small.....its coming back to 1305
Add qnovo fast charging in a future update please
sanjeev7 said:
In official RR....minimum frequency is not staying in CPU small.....its coming back to 1305
Click to expand...
Click to collapse
That is fine, it shows wrong, it's cm feature, cpu is boosted in input, it will jump from 400 to 1305 sometimes but will come back.
Was Expecting Cyanpro :3 Btw cool u rocket In Yu forums Man hatf off !
Sent from my Redmi Note 3 using Redmi Note 3 Forums