Related
Hej guys. I really hope that you can help me with my problem
Have been trying for 2 days and looking at post but haven't been able to get it fixed.
Here goes.
I have been playing around with custom roms on my htc one for a while now.
Then when i was about to install a new custom rom, i first wiped my phone.
I properly wiped something that should not be wiped, because i ended up with no os and no custom rom zip file that i could install in twrp.
I then tryed sideloading revolutions, and it seemed to work because it ended up booting on the phone and i could select what programs too install with it... but halfway through it stoped and rebooted.
now i cant even get into recovery anymore, and booting the phone only gets it to htc briliant logo. Then it restarts and tryes going into recovery, but it cant, and ends up just restarting over and over again.
Tryed flashing cwm and twrp again, but still cant get into recovery.
adb dont fint my device, and i have tryed all drivers i could find.
Tryed using a RUU, but it fails. Properly because its not the right one, but cant fint one that fits.
Sooo... i think im in a real pickle right now.
my radio is :4a.14.3250.13
hboot: 1.44.0000
Thinking about going back with my phone, but with the warranty gone i dont know if they'll even look at it.
Hoping for some advise, or some ideas on what to do.
-dealba
fastboot erase cache in terminal or with all in one toolkit
Arh thanks for your reply.
Cant belive i dident try that.
but it worked, im now able to get into twrp.
It says that i have 0 mb internal storage?
should i try to flash twrp again or what should my aproach be ?
dealba said:
Arh thanks for your reply.
Cant belive i dident try that.
but it worked, im now able to get into twrp.
It says that i have 0 mb internal storage?
should i try to flash twrp again or what should my aproach be ?
Click to expand...
Click to collapse
try reboot recovery if that doesnt work install cwm non touch. i love twrp but i had the same issue with it and i havent had it with cwm
skinsfanbdh said:
try reboot recovery if that doesnt work install cwm non touch. i love twrp but i had the same issue with it and i havent had it with cwm
Click to expand...
Click to collapse
Okay thanks
So i tryed installing cwm the non touch version. but it says the same thing as twrp.
And that is that it cant mount /sdcard/
dealba said:
Okay thanks
So i tryed installing cwm the non touch version. but it says the same thing as twrp.
And that is that it cant mount /sdcard/
Click to expand...
Click to collapse
i dont think that is a problem. im not absolutely sure about that but what is the next step you trying to accomplish
skinsfanbdh said:
i dont think that is a problem. im not absolutely sure about that but what is the next step you trying to accomplish
Click to expand...
Click to collapse
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
dealba said:
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
Click to expand...
Click to collapse
you on a windows computer?
dealba said:
Well, im really just trying to get an os flashed back on the phone so i can boot it, either by another custom rom or a stock rom.
But since i cant use adb commands, how do i get a new rom on there?
Click to expand...
Click to collapse
i have had the same problem. what i did is in twrp recovery go to wipe --- format data --- type yes (WARNING you will lose all your files)
skinsfanbdh said:
you on a windows computer?
Click to expand...
Click to collapse
Yes, im running windows
dealba said:
Yes, im running windows
Click to expand...
Click to collapse
download all in one toolkit if you havent already its easy to use and easier for me to tell you what to do. plus i dont know how well you know adb and fastboot commands
rambo12345 said:
i have had the same problem. what i did is in twrp recovery go to wipe --- format data --- type yes (WARNING you will lose all your files)
Click to expand...
Click to collapse
okay thanks, now i can see my sdcard.
But still wondering how to get a rom on it so i can flash from twrp..
dealba said:
okay thanks, now i can see my sdcard.
But still wondering how to get a rom on it so i can flash from twrp..
Click to expand...
Click to collapse
adb sideload
its an option in the all in one tool kit but its easier or you can type the command
skinsfanbdh said:
download all in one toolkit if you havent already its easy to use and easier for me to tell you what to do. plus i dont know how well you know adb and fastboot commands
Click to expand...
Click to collapse
I got the toolkit now
got a 5 min post restriction so little slow on replying
dealba said:
I got the toolkit now
got a 5 min post restriction so little slow on replying
Click to expand...
Click to collapse
i think it it will be over after 3 more posts. plug your phone in. then open all in one toolkit and select adb sideload then just follow the on screen instructions
skinsfanbdh said:
i think it it will be over after 3 more posts. plug your phone in. then open all in one toolkit and select adb sideload then just follow the on screen instructions
Click to expand...
Click to collapse
Okay, did the side loader, and used android revolutions rom. It installed and and after staying on boot animation a few minnuts it started.
Thank you so much for your help, really appreciate it
dealba said:
Okay, did the side loader, and used android revolutions rom. It installed and and after staying on boot animation a few minnuts it started.
Thank you so much for your help, really appreciate it
Click to expand...
Click to collapse
no problem. have fun:victory:
skinsfanbdh said:
fastboot erase cache in terminal or with all in one toolkit
Click to expand...
Click to collapse
So I'll try here first. I am having the same issue, I can't get the device to boot into recovery, no matter if I clear the cache, or flash either one of twrp or CWM.
I unlocked the bootloader, I think used the all in one toolkit to flash the recovery. When that didn't work, I erased the cache and manually flashed the recovery, and it said it pushed successfully.
I am at a loss, I have no idea what to try next, any help would be appreciated.
******Finally got it, I had to disable Fast Boot in the Power options in Settings******
How do you copy update.zip from external to internal SD?
Sorry if it's a total no-brainer, but how do I manually copy a recovery zip to the internal update.zip? Can I do this from my phone (which is stuck in a bootloop: see below)? Or do I have to use ADB with my computer?
Turbojugend said:
So I'll try here first. I am having the same issue, I can't get the device to boot into recovery, no matter if I clear the cache, or flash either one of twrp or CWM.
I unlocked the bootloader, I think used the all in one toolkit to flash the recovery. When that didn't work, I erased the cache and manually flashed the recovery, and it said it pushed successfully.
I am at a loss, I have no idea what to try next, any help would be appreciated.
******Finally got it, I had to disable Fast Boot in the Power options in Settings******
Click to expand...
Click to collapse
My situation:
Using Open Recovery I tried to install CM7 with custom kernel on my XT720
It gave an error: "assert failed: write_raw_image... Status 7" As I was looking that up, my phone blackscreened. After a while I pulled the battery.
Then on startup it went into a bootloop after a picture of a broken screen saying "2ndboot kernel restart in progress." (Presumably the kernel wasn't properly applied?)
Trying to boot into bootloader says battery is too low.
Phone will only turn on when plugged into outlet.
What I think I need to do:
- Copy a good update from my external SD over the bad update.zip on the internal SD, and apply the update to reset the kernel, etc.
- Open Recovery could do this, if I could load it.
- I could load Openrecovery if I could get the bootloader to run,
- I could get the bootloader to run if my battery would charge
My phone is f'd up.
I tried installing Liquid Smooth 6/10 version, and I got nothing but system UI FC's over and over. So, I held power and volume up until the screen rebooted, and then volume down to get to bootloader.
Then, I selected recovery from there. When I got into recovery, there was nothing in the internal memory, so I did the "fix" where you type in adb on your computer. Every thing went well, I suppose, but when I tried to reboot, it went to the splash screen and did nothing else.
Well, I went back into recovery to restore a backup, a stock Sense back up, and TWRP rebooted. It has been doing this every time I try to get into recovery. I can't do anything. I even installed a previous TWRP by going into bootloader and using an SD converter card with my PC, because ADB doesn't even recognize the device anymore.
I was using Cpt Throwbacks recovery, the newest one, and then I tried reverting to an older one.
Any help....PLEASE!?
Have you tried formatting data and internal storage?
Do you have a recovery log?
Captain_Throwback said:
Have you tried formatting data and internal storage?
Do you have a recovery log?
Click to expand...
Click to collapse
I tried redoing a wipe of dalvik, cache, system, and data....have not tried to do internal, but it reboots before it finishes anyway.
I will try again to do internal.
mcwups1 said:
I tried redoing a wipe of dalvik, cache, system, and data....have not tried to do internal, but it reboots before it finishes anyway.
I will try again to do internal.
Click to expand...
Click to collapse
Sounds like an RUU might be in your future. Some partition(s) seem to be corrupted.
Captain_Throwback said:
Sounds like an RUU might be in your future. Some partition(s) seem to be corrupted.
Click to expand...
Click to collapse
Capt, I did this "fix".
http://forum.xda-developers.com/showthread.php?t=2773203
Could this mess up my partitions?
mcwups1 said:
Capt, I did this "fix".
http://forum.xda-developers.com/showthread.php?t=2773203
Could this mess up my partitions?
Click to expand...
Click to collapse
I honestly don't know. If you used that command I assume you also had the random encryption issue, which could mean you have a different problem altogether.
Did you try using the partition repair options in TWRP?
Captain_Throwback said:
I honestly don't know. If you used that command I assume you also had the random encryption issue, which could mean you have a different problem altogether.
Did you try using the partition repair options in TWRP?
Click to expand...
Click to collapse
I will try partition repair, but is that on the newest version only?
I can still get into bootloader, and when I plug it in to my computer, it still makes the connection sound, but recovery will not stay active. After about 10 seconds, it reboots to splash screen, but goes no further because I don't believe there is anything installed now.
Well, it won't stay in TWRP long enough to do anything. My internal is there now at least. I just don't get it.
Running RUU as we speak. I hope that since I have the .13 firmware installed, that it won't mess up.
Wow. Again.
I made a mistake by doing a backup, then trying to install another ROM, but forgot to wipe data. Went through the process (splash screen, boot animation, updating apps) and it booted for a second and rebooted. I figured it would happen, since I didn't wipe correctly.
Try to go into TWRP, and the damn thing reboots out of TWRP! I can't stay in TWRP for more than 5-7 seconds, before it reboots on its' own. Went to flashboot to reinstall TWRP, no change. I can't even do a restore.
I know I installed a ROM once through fastboot with a "fastboot flash zip rom.zip" command, but that isn't working either. Can't get a log, because I can't stay booted in anything other than fastboot/bootloader.
I searched for an answer, and this is all I got! My phone must be borked. Guess I'll have to RUU again.
I had this issue last night and I got it to restore a backup by unplugging it from the wall first. I think the voltage is too high or something during a flash or something.
mcwups1 said:
I know I installed a ROM once through fastboot with a "fastboot flash zip rom.zip" command, but that isn't working either. Can't get a log, because I can't stay booted in anything other than fastboot/bootloader.
Click to expand...
Click to collapse
You can't install a custom ROM this way, unless it's been built into an image file. This is only for flashing image files that have been zipped up with an android-info.txt file.
Have you tried updating firmware, then booting back into recovery?
Captain_Throwback said:
You can't install a custom ROM this way, unless it's been built into an image file. This is only for flashing image files that have been zipped up with an android-info.txt file.
Have you tried updating firmware, then booting back into recovery?
Click to expand...
Click to collapse
I already RUU'd, so I should have had the appropriate firmware.
mcwups1 said:
I already RUU'd, so I should have had the appropriate firmware.
Click to expand...
Click to collapse
I was suggesting flashing the firmware to normalize your device, so that maybe you could get back into recovery. I wasn't suggesting it because I thought you were on the wrong firmware.
Captain_Throwback said:
I was suggesting flashing the firmware to normalize your device, so that maybe you could get back into recovery. I wasn't suggesting it because I thought you were on the wrong firmware.
Click to expand...
Click to collapse
I ended up RUU'ing again.
If it happens again, I will take your advice and report back.
Trying to sell my Nexus 6 I believe I bricked it. After rooting the device I used Chainfire 3d program and it made me stuck on google sign. I tried literally everything. I can boot into teamwin TWR recovery. I tried factory resetting wiping cache and delvic. Problem is my bootloader is coming up locked. Tried using fastboot many times to flash everything back keep getting remote failure. Need help, is it possible im just screwed at this point. Ive used about everything it is just stuck saying Google. PLEASE HELP!!!!
chainfires 3d program hasnt worked on a nexus in years. and you do need to boot back up to enable unlocking the bootloader in the developer options. have you tried wiping data in twrp recovery?
zacrivera24 said:
Trying to sell my Nexus 6 I believe I bricked it. After rooting the device I used Chainfire 3d program and it made me stuck on google sign. I tried literally everything. I can boot into teamwin TWR recovery. I tried factory resetting wiping cache and delvic. Problem is my bootloader is coming up locked. Tried using fastboot many times to flash everything back keep getting remote failure. Need help, is it possible im just screwed at this point. Ive used about everything it is just stuck saying Google. PLEASE HELP!!!!
Click to expand...
Click to collapse
Relax, deep breath. You need to use fastboot from bootloader. Issue these commands:
fastboot format cache
fastboot format userdata
That should get you into TWRP and from there you can transfer a ROM to internal, flash it and go from there.
Evolution_Freak said:
Relax, deep breath. You need to use fastboot from bootloader. Issue these commands:
fastboot format cache
fastboot format userdata
That should get you into TWRP and from there you can transfer a ROM to internal, flash it and go from there.
Click to expand...
Click to collapse
well, he wrote that he can boot into twrp recovery already. wiping data should fix his use of chainfires app. but flashing a new rom would do the same
simms22 said:
well, he wrote that he can boot into twrp recovery already. wiping data should fix his use of chainfires app. but flashing a new rom would do the same
Click to expand...
Click to collapse
Yeah, guess I missed that part.
Evolution_Freak said:
Yeah, guess I missed that part.
Click to expand...
Click to collapse
thinking about it now.. with the bootloader locked, would twrp let you flash anything?
simms22 said:
thinking about it now.. with the bootloader locked, would twrp let you flash anything?
Click to expand...
Click to collapse
Yes, it has been done to fix the soft brick I thought we were dealing with here. Only if TWRP is installed though.
Doesn't chainfire 3d modify system? I though it did. May need to flash a rom zip after a factory reset.
rootSU said:
Doesn't chainfire 3d modify system? I though it did. May need to flash a rom zip after a factory reset.
Click to expand...
Click to collapse
honestly, i dont remember. its been about 3-4 years since last thinking of that app. if it does, a rom flash would be needed.
Here's the whole story:
I was on an unofficial build of RR CM13, encrypted, using TWRP 3.0.2-1.
I wiped data, dalvik, cache, and flashed the newest Official RR 7.1.1 and open-gapps.
I boot into the new ROM and start setting stuff up.
I restore some apps' data using Titanium Backup, then reboot.
On reboot I'm greeted with the device setup screen
I reboot, wipe, reflash a bunch of times
A few times:
When I rebooted after using the system my PIN doesn't decrypt the system/data (booting into the system)
When I rebooted after using TWRP my PIN does decrypt (booting into the system)
At some point during this I try wiping everything from TWRP, but it freezes, goes black, and then the notification LED turns white. I hold the power button and boot back to TWRP.
Apparently wiping /data is the problem (everything else wipes just fine if I do them individually)
I boot back into the system, set it up, and do a full factory reset from there (after offloading my stuff from Internal Storage)
Back to TWRP, now no matter what I flash or restore, I don't end up booting into the system, only into TWRP
I've also tried TWRP 3.0.4-0 (which wouldn't decrypt my data), and I've reflash TWRP a few times.
How do I actually boot into my system? It's been 7 hours, and I'm losing my mind.
Deleted
Boot to your ROM through the power button...
Manually..
Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Do what he said. You've already wiped your internal storage, so just start from scratch.
Just Passing By said:
Not sure if you've tried this yet, but considering you've already backed your phone up, I'd just recommend to start clean and use the unbricker tool.
Click to expand...
Click to collapse
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
RustySpackleford said:
Thanks, that worked, but now when I try to boot into recovery I get a black screen.
I was able to use the Toolkit to boot into TWRP and flash my ROM. Any ideas how to fix this?
Click to expand...
Click to collapse
flash twrp
adb push os zip
adb push su
flash all , if needed format data.
This is what I have done yesterday,
edit: If u brick I don't take any responsibility.
Deleted
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
uttam.ace said:
TWRP has enormous potential and so does ADB try to use them.
First ensure TWRP is working, If it works you're 80℅ safe , then further do some XDA search as per your need. I am sure it will work again.
This is purely my experience since 6 years I am flashing .
Click to expand...
Click to collapse
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
bluuquthug said:
hi bro, i facing 'white led black screen' on my 3T, can you explain what should i do for fix this?
please.. :crying:
Click to expand...
Click to collapse
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
uttam.ace said:
Hi ! Do not worry try this
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Click to expand...
Click to collapse
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
bluuquthug said:
it cant bro, i tried using that unbrick tool but still facing same problem after i update or flashing ROM again.
or can you explain step by step to fix that? almost all ROM i tried but still happening, am i wrong?
Click to expand...
Click to collapse
Your TWRP is working right!
go to TWRP/ Advanced/ADB Sideload
type "adb sideload /path/to/rom.zip"
Mate, recommend using ADB Sideload on TWRP itself is the only viable option you have. OR if that doesn't work and you still have the PIN issues, you should definitely use the Unbrick Tool and get everything back to Stock, and then reflash everything
Note: Using the unbrick tool will cause it to relock bootloader, so you're gonna have to start over again.
Cheers!
Hi everyone.
I was trying to flash Nitrogen OS. First I flashed the latest firmware, then the actual rom and then GAPPS. After that my mobile got stuck in Oneplus logo without being able to go into recovery mode.
I tried using fastboot to flash the files in this thread(https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306) which worked once, but even after that I can't surpass the logo screen.
I've been trying to look for information but I can't find anything.
To clarify:
- I already tried erasing userdata and cache from fastboot
-I already tried flashing recovery images from twrp, stock and bluspark
Thanks in advance guys.
Pavononer23 said:
Hi everyone.
I was trying to flash Nitrogen OS. First I flashed the latest firmware, then the actual rom and then GAPPS. After that my mobile got stuck in Oneplus logo without being able to go into recovery mode.
I tried using fastboot to flash the files in this thread(https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306) which worked once, but even after that I can't surpass the logo screen.
I've been trying to look for information but I can't find anything.
Thanks in advance guys.
Click to expand...
Click to collapse
Which TWRP are you using? Which firmware are you flashing? You can't access recovery at all? I've run into plenty of bricks like this and I'm usually able to get back to recovery by forcing the device off (vol up + power hold) and rebooting back to recovery. and if that doesn't work I can at least get to the bootloader and re-flash a recovery file.
rykanator said:
Which TWRP are you using? Which firmware are you flashing? You can't access recovery at all? I've run into plenty of bricks like this and I'm usually able to get back to recovery by forcing the device off (vol up + power hold) and rebooting back to recovery. and if that doesn't work I can at least get to the bootloader and re-flash a recovery file.
Click to expand...
Click to collapse
I was using last bluspark recovery. I was flashing OB21 when everything happened.
There is no way I can access to recovery. I tried reflashing the stock recovery from that unbricking thread with all the other things through fastboot and I can't boot into recovery at all. It is the first time I face this error so I am lost.
Pavononer23 said:
I was using last bluspark recovery. I was flashing OB21 when everything happened.
There is no way I can access to recovery. I tried reflashing the stock recovery from that unbricking thread with all the other things through fastboot and I can't boot into recovery at all. It is the first time I face this error so I am lost.
Click to expand...
Click to collapse
can you boot into the bootloader/fastboot?
rykanator said:
can you boot into the bootloader/fastboot?
Click to expand...
Click to collapse
Yes I can
Pavononer23 said:
Yes I can
Click to expand...
Click to collapse
okay, well what I would do is boot into the bootloader, and then reflash the blu_spark recovery via adb so you can boot into it. then wipe everything and restart. but this time I would try the OB 20 firmware and not the 21. when I was on NOS I used that one and it worked just fine. I'm not sure if it made a difference, but I flashed the firmware both right before and right after flashing NOS
rykanator said:
okay, well what I would do is boot into the bootloader, and then reflash the blu_spark recovery via adb so you can boot into it. then wipe everything and restart. but this time I would try the OB 20 firmware and not the 21. when I was on NOS I used that one and it worked just fine. I'm not sure if it made a difference, but I flashed the firmware both right before and right after flashing NOS
Click to expand...
Click to collapse
It doesnt recognize my device through adb and I don't know why. If that worked I would have tried to sideload some firmware, but when I do adb devices it doesn't appear
Pavononer23 said:
It doesnt recognize my device through adb and I don't know why. If that worked I would have tried to sideload some firmware, but when I do adb devices it doesn't appear
Click to expand...
Click to collapse
idk if it'll recognize as an adb device if it's in the bootloader. maybe try fastboot devices? sorry, I'm just spitballin here
rykanator said:
idk if it'll recognize as an adb device if it's in the bootloader. maybe try fastboot devices? sorry, I'm just spitballin here
Click to expand...
Click to collapse
Somehow fastboot devices does send me that my device is there but adb devices no, I will try looking into that to see if that works. Thanks for the help anyway
Pavononer23 said:
Somehow fastboot devices does send me that my device is there but adb devices no, I will try looking into that to see if that works. Thanks for the help anyway
Click to expand...
Click to collapse
yeah! try fastboot flash recovery "recovery file name".img
make sure that recovery img file is in the platform-tools file (or wherever your adb files are) and see if that works!
rykanator said:
yeah! try fastboot flash recovery "recovery file name".img
make sure that recovery img file is in the platform-tools file (or wherever your adb files are) and see if that works!
Click to expand...
Click to collapse
It is not working, I think I lost my Oneplus 3t...
Pavononer23 said:
It is not working, I think I lost my Oneplus 3t...
Click to expand...
Click to collapse
I mean idk if you wanna do this, but you could always try to "format userdata", then flash the stock recovery, and then sideload OOS. but you would lose all of your data in your internal storage, and it's still not a guarantee. there are some posts about doing a full wipe and starting from scratch. I'd look into those. Best of luck reviving your OP3T
Pavononer23 said:
It is not working, I think I lost my Oneplus 3t...
Click to expand...
Click to collapse
just a tip, try posting the output instead of "it's not working",
so the devs here might be able to analyze the problem..
nicknacknuke said:
just a tip, try posting the output instead of "it's not working",
so the devs here might be able to analyze the problem..
Click to expand...
Click to collapse
I already post a lot of information on the first post:
Mobile not passing the first time Oneplus logo appears.
Only fastboot is working, not adb, not recovery.
I already tried flashing other recoveries and the stock one->Can't pass Oneplus logo anyway
Tried formatting userdata through fastboot and flashing the .img files from my first post->Not working
Then just do the Qualcomm restore and unlock, boot to fastboot and flash the latest TWRP. Then boot into TWRP and format cache partitions, system and data and then adb sideload using this option under TWRP advanced to flash firmware zip, NitrogenOS zip and then 8.1 Gapps and try booting to see if same thing happens again. You are using the NitrogenOS stock kernel and not some other?
pitrus- said:
Then just do the Qualcomm restore and unlock, boot to fastboot and flash the latest TWRP. Then boot into TWRP and format cache partitions, system and data and then adb sideload using this option under TWRP advanced to flash firmware zip, NitrogenOS zip and then 8.1 Gapps and try booting to see if same thing happens again. You are using the NitrogenOS stock kernel and not some other?
Click to expand...
Click to collapse
What do you mean by the Qualcomm restor and unlock? I already tried the flashing of latest TWRP and it did not work.
I was coming from Validus last beta but did a previous factory reset and that stuff.
Thank you for the answer
Pavononer23 said:
What do you mean by the Qualcomm restor and unlock? I already tried the flashing of latest TWRP and it did not work.
I was coming from Validus last beta but did a previous factory reset and that stuff.
Thank you for the answer
Click to expand...
Click to collapse
What he meant is probably unbrick tool - https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Try flashing official firmware with it and then try again by flashing TWRP and flashing Nitrogen.
przemcio510 said:
What he meant is probably unbrick tool - https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Try flashing official firmware with it and then try again by flashing TWRP and flashing Nitrogen.
Click to expand...
Click to collapse
I can't install the drivers:
-First, stupid Windows policy saying that its driver is the best one available.
-Second, choosing from a disk to avoid one saying that the driver is not a x64 one.
Pavononer23 said:
I already post a lot of information on the first post:
Mobile not passing the first time Oneplus logo appears.
Only fastboot is working, not adb, not recovery.
I already tried flashing other recoveries and the stock one->Can't pass Oneplus logo anyway
Tried formatting userdata through fastboot and flashing the .img files from my first post->Not working
Click to expand...
Click to collapse
None of that answer what he actually asked, which is: what was the output (error message, result, etc.) when you tried to flash TWRP?
Did it flash successfully, but still can't boot to TWRP? Or else, what was the exact error message?
In general, when asking for help and giving status, be specific as possible, and give as many details as possible. Saying you "tried xxx" or "it did not work" is not specific enough.
Seems silly, but I've seen a lot of times where it's as simple as the user not using the correct command or entering the right file name.
redpoint73 said:
None of that answer what he actually asked, which is: what was the output (error message, result, etc.) when you tried to flash TWRP?
Did it flash successfully, but still can't boot to TWRP? Or else, what was the exact error message?
In general, when asking for help and giving status, be specific as possible, and give as many details as possible. Saying you "tried xxx" or "it did not work" is not specific enough.
Seems silly, but I've seen a lot of times where it's as simple as the user not using the correct command or entering the right file name.
Click to expand...
Click to collapse
There were no errors when flashing TWRP. When I tried rebooting using fastboot(fastboot boot recovery.img) it got stuck in the message saying booting up... and the only thing that changed was that my phone left the bootloader screen to a screen with the Oneplus logo and a fastboot mode message under it.
The command I used was fastboot flash recovery recovery.img(Name of the actual recovery file)