I install pbrp and followed the steps its unlocked, complete recovery and vbmeta after installed them and when i put fastboot reboot recovery i got (unknown reboot target recovery) instead, if i use adb reboot recovery i just go in annoying colorOS Recovery instead of PBRP
install the recovery again, happened with me too
Related
so after following the instrucions down below, I can't access TWRP recovery. Everytime I go to the recovery from bootloader, it will restart the phone automatically. I made a backup before doing this, but now i can't even get into recovery mode from boot loader
Installing recovery using fastboot
You can use fastboot to install your recovery image to the device.
Installing ClockworkMod Recovery on the One (Sprint)
Download koush's ClockworkMod Recovery.
koush's ClockworkMod Recovery: download
md5: 8e1001f45ad07d4cda03b813739f85c1
Connect the One (Sprint) to the computer via USB.
Make sure the fastboot binary is in your PATH or that you place the downloaded image in the same directory as fastboot.
Open a terminal on your PC and reboot the device into fastboot mode by typing adb reboot bootloader or by using the hardware key combination.
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
Flash ClockworkMod Recovery onto your device by entering the following command: fastboot flash recovery your_recovery_image.img where the latter part is the name of the file you downloaded.
Once the flash completes successfully, reboot the device into recovery to verify the installation.
Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
stevenpyang said:
so after following the instrucions down below, I can't access TWRP recovery. Everytime I go to the recovery from bootloader, it will restart the phone automatically. I made a backup before doing this, but now i can't even get into recovery mode from boot loader
Installing recovery using fastboot
You can use fastboot to install your recovery image to the device.
Installing ClockworkMod Recovery on the One (Sprint)
Download koush's ClockworkMod Recovery.
koush's ClockworkMod Recovery: download
md5: 8e1001f45ad07d4cda03b813739f85c1
Connect the One (Sprint) to the computer via USB.
Make sure the fastboot binary is in your PATH or that you place the downloaded image in the same directory as fastboot.
Open a terminal on your PC and reboot the device into fastboot mode by typing adb reboot bootloader or by using the hardware key combination.
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
Flash ClockworkMod Recovery onto your device by entering the following command: fastboot flash recovery your_recovery_image.img where the latter part is the name of the file you downloaded.
Once the flash completes successfully, reboot the device into recovery to verify the installation.
Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately
boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
Click to expand...
Click to collapse
get Into fastboot ; from cmd type, fastboot erase cache
and then try getting into recovery
nope
prunzzz said:
get Into fastboot ; from cmd type, fastboot erase cache
and then try getting into recovery
Click to expand...
Click to collapse
I did that and the same problem. instead of the phone restarting it just shuts down now.
stevenpyang said:
I did that and the same problem. instead of the phone restarting it just shuts down now.
Click to expand...
Click to collapse
put here the link of guide you followed
also the link of download of recovery
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Try another recovery and if it failed try full flash latest stable rom
Well, I have been warning so many times that use any TWRP in MI9:
1. format data partition
2. reboot TWRP and then enter twrp. Make twrp mount data partition
3. wipe everything BUT please keep system partition only
4. reboot twrp and then enter twrp again
5. Now wipe system partition and then flash any rom you want
6. reboot
How to save your phone now ? Please try fastboot ROM and use miflash app to save your phone !
Kris
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Some questions here:
1. Is Redmi K20 CN the same as Mi9T?
If yes, that twrp is correct and the best one
2.After flashing twrp, can you enter twrp by general
method : power + volume up to enter twrp?
If yes, I think the problem is coming from your data
partition. Please format your data partition first and
then reboot to Twrp again. Then copy your rom in your
phone and then wipe cache/ dalvik cache/system. Next
to flash rom. Always Remeber not to reboot your
phone if you haven't flashed rom under twrp after
flashing system partition.
Kris
Ardysan said:
@Kris Chen I am in similar situation here... Can you please help?
First of all - which TWRP should we use for Mi9T? IS this one good? https://mifirm.net/model/davinci.ttt#other-twrp
After flashing recovery-TWRP-3.3.1-0607-REDMI_K20-CN-wzsx150.img - fastboot boot twrp.img goes okay
And then after "fastboot boot twrp.img" the phone restarts and is just stuck on the "semitransparent" MI logo...
I can press Vol+- and power buttons and boot into Mi 3 recovery, wipe data, set up the phone again. And then it is all over again. I am new to this and probably making some basic mistake?
EDIT. I think the mistake was to trying to use a wrong TWRP...
Click to expand...
Click to collapse
Thank you Kris!
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Failykun said:
Download the fastboot rom (Google it )then flash it with miflashtool just make sure the archive of the ROM is "tgz"before you unzip it .
Click to expand...
Click to collapse
This is what I had to do both times this happened.
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
RebornCheiko said:
I have the same exact problem
I used the same TWRP and I also wiped system.
Did you fixed it already?
Click to expand...
Click to collapse
As i understand, you wiped system and then restarted? And now you can enter only fastboot?
When you wipe system you must flash a ROM without restart or after restart, only fastboot available. TWRP version has nothing to do with this.
Now you must use mi flash or adb and fastboot utility. Download fastboot version of ROM, then open archive and flash it using mi flash or flash_all.bat script. flash_all_lock.bat will also lock your bootloader and mi flash has that option too, so check twice what option you choose
After flashing ROM you can flash TWRP again and it will be available, because by flashing ROM you restored system
I had the same problem.
Try to flash vbmeta.img via fastboot (fastboot --disable-verity flash vbmeta vbmeta.img) and then flash recovery then boot recovery.
Or try to flash boot.img (fastboot flash boot boot.img) then flash recovery.
ManuBBXX said:
Hello all.
Here is my problem
I successfully unlocked my bootloader and I flashed latest maunofrio twrp v35
In TWRP, I did a full wipe in TWRP and formatted data partition to remove encryption
But now, I can't boot again in twrp and I'm stucked in fastboot.
Vol UP + power does not boot in twrp but still in fastboot..
When I hit the command : fastboot flash recovery recovery.img, it says OK
But fastboot boot recovery.img no longer workos now, failed
( before wiping and formatting all it worked )
I don't know what to do now to access twrp..
Any help is very appreciated
Greetings
Click to expand...
Click to collapse
I got you chief. Make sure you have adb and fastboot installed.
No you don't need Mi flash tool for this. All you need is a computer.
Go to fastboot mode, plug in your device and expand cepheus.tgz file you downloaded. Link below
https://xiaomifirmwareupdater.com/
Now open the folder. You have the flash_all files in there. Any .bat file is for Windows only. Any .sh files are for Mac and Linux.
Make sure the device is recognized in fastboot via cmd or terminal
WINDOWS ONLY: Open Command prompt and drag flash_all.bat into the cmd window and press enter
MAC/LINUX: Open terminal and drag flash_all.sh into the terminal window and press enter.
This part requires some patience. Wait until everything is finished.
Reboot using power button and it should be back to normal.
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
same problem here... were you able to fix it?
You might have to use the QFIL method to get your phone going again. Remember you MUST backup the EFS partition and anything associated with your phones imei and SN
Lirimaer said:
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
Click to expand...
Click to collapse
flash the boot partition then flash stock recovery then try to flash twrp then try to flash a custom or stock rom what you want.
Lirimaer said:
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
Click to expand...
Click to collapse
Anyone solve this problem?
Juninalilla said:
有人解决这个问题吗？
Click to expand...
Click to collapse
这两个可怕的重锁码吓了我一跳，以为手机没电了。幸运的是，我找到了解决方案。你可能需要找个老股rec，跟着视频操作，不用拆机，重点解压。进入adb文件夹，生效
Lirimaer said:
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
Click to expand...
Click to collapse
Hey guy,
My phone was running the rom "UL-ASUS_X00QD-ASUS-AOSP-17.0615.2005.25-1.1.1-user.zip" (downloaded from Asus Web). I tried to install the TWRP ver 3.3.1 unofficial and my phone was stuck on the fastboot mode only.
After a lot of searching on how to fix the issue, I didn't change anything and almost gave up, until I've read this thread.
My Asus Zenfone 8 flip is STUCK in CSC FASTBOOT MODE PLZ HELP!, RAW FIRMWARE ANYONE???
These are what I did to get the phone into the recovery mode:
1. Extract the rom zip file that my phone was running on.
2. Copy the file boot.img to adb folder.
3. On PC, at adb folder enter CMD, connect the phone then type
fastboot -w
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot recovery
4. After that, my phone can be booted into the recovery mode.
Hope you can solve the same problem as me.
Bye bye ...
Hello,
I was trying to install a custom ROM after upgrading to Android Q beta. So I tried to install TWRP 3.4.0, I could flash with `fastboot flash recovery twrp.img` but the `fastboot boot twrp.img` never worked. Reboot to recovery was always leading to old recovery.
I always could have reboot into system until I enter the command. I guess that was a bad thing.
$ fastboot boot twrp.img
So right now I can access to fastboot, recovery and twrp boot but not android system anymore.
Here's where I boot when I chose to reboot into partition from twrp :
System -> TWRP
Recovery -> Old Recovery
Bootloader -> fastboot
How can I recover from all this mess ?
Hi my k20 pro in working normally, means it boot like normally does, bootloaders are also unlocked, but when i trys to flash recovery via adb, it flashes normally, but when i try to boot into recovery it goes into fastboot mode, boot into recovery command also dosent work, i tried with latest twrp "twrp-3.5.2_9-0-raphael.img" and some old versions also.
tried flashing orange fox recovery also, but no luck, the only method via which i can boot into recovery is adb command "fastboot boot recovery.img"
Flashing recovery in TWRP when you fastboot booted twrp works or not?