Just wondering if anybody else has tried this. I've got my Chromecast connected to an HDMI to Composite converter box in order to stream Google Play Music through an old audio receiver. The video out goes to an old monitor. It works at first, but if I try switching apps it causes the Chromecast to reboot. I assume this due to some kind of feedback from the HDMI converter, as the Chromecast works fine connected to a newer receiver with an HDMI port. Anyone tried anything similar, or have any advice? I haven't tried since the OTA, but I'm thinking I may do a factory reset and give it another go just to see what happens.
Hi folks, I have my chromecast connected directly to my Denon avr 3310 and powered from the USB port on my TV. Chromecast is working as expected. I get dolby digital plus with no problems and great hd pictures from Netflix. Trouble happens when I switch back to my satellite box. That's connected to my TV via hdmi and receiver via optical. Since adding chromecast I get audio dropouts when watching satellite. How do I know it's chromecast? When I remove the USB cable powering the chromecast from the TV all audio issues dissappear. Anyone have similar issues? Cheers mick
I would do what was suggested and move the usb to maybe a wall adapter for power for troubleshooting. Also make sure that somehow your optical input is not assigned to the same source as your chromecast hdmi input and double check all your input assignments on the Denon.
007shark said:
I would do what was suggested and move the usb to maybe a wall adapter for power for troubleshooting. Also make sure that somehow your optical input is not assigned to the same source as your chromecast hdmi input and double check all your input assignments on the Denon.
Click to expand...
Click to collapse
Tried everything but in the end changed my satellite receiver to send audio via hdmi to the reciever and everything is playing nice now
micks_address said:
Hi folks, I have my chromecast connected directly to my Denon avr 3310 and powered from the USB port on my TV. Chromecast is working as expected. I get dolby digital plus with no problems and great hd pictures from Netflix. Trouble happens when I switch back to my satellite box. That's connected to my TV via hdmi and receiver via optical. Since adding chromecast I get audio dropouts when watching satellite. How do I know it's chromecast? When I remove the USB cable powering the chromecast from the TV all audio issues dissappear. Anyone have similar issues? Cheers mick
Click to expand...
Click to collapse
Same here with a Denon 790 and analog sources. The Chromecast is plugged on back of the receiver inside a bookshelf nook, so disconnecting it is impractical.
The workaround is to drill down the menu through Input Assign > [HDMI] for the port used by Chromecast > set to "None". When using the Chromecast again, reverse the procedure and reassociate the port. Don't forget which port number holds the Chromecast.
It's inconvenient and my wife explicitly Does Not Like It, but the dropouts stop when you disassociate the port. You eventually memorize the remote key sequence without needing the onscreen menu.
Hope this helps, even after 3+ years.
Hi
Does the moto x support HDMI out? I want to watch a large video file and the Chromecast keeps pausing when I'm trying to stream it, so I've downloaded it and want to now use HDMI out to watch it.
However the MHL adapter I have isn't working, what adapter do I need to get HDMI out to work or doesn't the phone have this function?
Thanks
Threads on this exist,
http://forum.xda-developers.com/moto-x/moto-x-qa/mhl-hdmi-t2425216
http://forum.xda-developers.com/moto-x/moto-x-qa/to-enable-mhl-hdmi-cable-support-t2858577
http://forum.xda-developers.com/moto-x/accessories/micro-usb-to-hdmi-moto-x-t2853888
?
A quick "no" also exists. Being helpful is not that hard.
Hi
I've received my P20 Pro this week and am loving the phone so far. However, one big issue remains that i can't seem to get my head around - how to play audio from the phone through my non-Bluetooth car stereo?
I previously had an iPhone 6 where this was easy; plug the phone in to the stereo via USB and it would simultaneously charge and play music from the phone through the car stereo.
But when I plug in the P20 Pro via the same USB port, I can't seem to get audio coming out. I know it's possible - as obviously headphones plug in to the same USB-c port - so is there something I have to turn on or toggle to get it to send audio out?
Any help much appreciated. Thanks.
slangking said:
Hi
I've received my P20 Pro this week and am loving the phone so far. However, one big issue remains that i can't seem to get my head around - how to play audio from the phone through my non-Bluetooth car stereo?
I previously had an iPhone 6 where this was easy; plug the phone in to the stereo via USB and it would simultaneously charge and play music from the phone through the car stereo.
But when I plug in the P20 Pro via the same USB port, I can't seem to get audio coming out. I know it's possible - as obviously headphones plug in to the same USB-c port - so is there something I have to turn on or toggle to get it to send audio out?
Any help much appreciated. Thanks.
Click to expand...
Click to collapse
Check you don't have this option enabled in developer options?
danifilth4king said:
Check you don't have this option enabled in developer options?
Click to expand...
Click to collapse
Thanks - I looked and it's not checked. In fact, the headphones work when you plug them in, so it is allowing audio out with certain connections.
It's just when I use the charging lead to connect the phone to the car stereo (USB) - nothing happens. It doesn't even charge, and says "check USB" on the front of the stereo. if I play music when it's connected, it just comes out the phone - which obviously it wouldn't do if it was connected to the stereo.
Do I need a specific audio lead, rather than just the basic charging one that comes with it?
Coming from an iPhone background, it's just the same lead... so I'm struggling to see why this won't work either.
My case was huawei p20 pro generate so much noise and jitter during playing through USB audio connect to Helix dsp, it solved by changing USB speed mode from full speed mode to high speed mode on the Helix dsp USB setting. As my iPhone was working fine on both mode. In case if you can try to change setting on your car stereo system. Try to consult with your car stereo manufacturer.
Hi Slangking, did you already find a solution to use P20 (pro) audio over USB in your car? I'm having the same issue as you, went from the iPhone 6 to p20. Just a cheap USB stick works, and I could even remote spotify on my iPhone with my steer trough USB. Changing the USB output in the developer settings to audio source didn't work
- EDITED -
I did some research and mounting your memory card as a USB Mass Storage will work like explained over here, but I still can't find out how this will work for the internal storage...
UPDATE
I found something called WIRELINQ: Smart Android USB Converter Cable for Car Stereo. Started as a kickstarter project, but are now able to buy. Will try that one out.
I got one of these and found I can't get anything to play through the stereo, the audio plays on the phone speakers but the track info displays on the stereo screen and the steering wheel controls also work, I can disable USB audio streaming via the dashlinq app which makes radio player within dashlinq work properly.. but nothing else works.. have you had any luck?
Thanks for your reply. You are a step ahead of me. I have the Wirelinq cable but couldn't get it to work, not even the track info on my cars stereo display. It recognise the Wirelinq cable, but not my phone. I am in contact with GROM and even tried to install a new firmware update (which I was able to install myself by connecting the cable to my computer), so there last message was:
This is issue of the phone USB Audio output in software not working correctly as standardized by Android's AOSP. You will have to contact Huawei to get support and resolve it on phone's software end.
Click to expand...
Click to collapse
brumemail said:
Thanks for your reply. You are a step ahead of me. I have the Wirelinq cable but couldn't get it to work, not even the track info on my cars stereo display. It recognise the Wirelinq cable, but not my phone. I am in contact with GROM and even tried to install a new firmware update (which I was able to install myself by connecting the cable to my computer), so there last message was:
Click to expand...
Click to collapse
Did you ever get anywhere with this? I'm a new P20 Pro owner (also having switched from iphone 6) and wanting to crack this issue. Thanks.
Not sure if there is a solution. iPhones behave differently when connected to stereos, just like an usb stick. Android devices don't, unfortunately. I am using an AUX cable with the usb-c adapter in my husbands car, or bluetooth streaming in my car.
Bleutooth receiver to AUX
fell.matt1602 said:
Did you ever get anywhere with this? I'm a new P20 Pro owner (also having switched from iphone 6) and wanting to crack this issue. Thanks.
Click to expand...
Click to collapse
No, it didn't work. Maybe it will if GROM will come out with an update. I've returned my cable and have bought a bluetooth to AUX receiver adapter on eBay for just a few dollar. This actually works very well, you plug the bluetooth adapter in your USB and the cable in your AUX and you can listening wireliss music on each app through bluetooth. The downside is that you won't be able to see your track details, no remote from your steer and the quality is different. But you can still charge you phone with a normal USB cable while listening. It's not a solution, but I got used to it now.
Not a bad idea with the bluetooth to aux!
all the pugs said:
Not sure if there is a solution. iPhones behave differently when connected to stereos, just like an usb stick. Android devices don't, unfortunately. I am using an AUX cable with the usb-c adapter in my husbands car, or bluetooth streaming in my car.
Click to expand...
Click to collapse
iphones actually don't behave like a usb stick when connected to a stereo. the music is still played on the iphone, but the sound is streamed to the stereo. controls on the stereo actually control the playback on the iphone itself.
with android, to play audio over usb, you need to use mass storage mode, which will behave just like a usb stick.
ios can output digital audio over it's usb cable, which the stereo can receive.
android can output audio through usb-c, but i don't think that it can be used to output audio over the usb cable like iphones can. it might be some protocol that iphones use and android phones don't, but technically it should be possible.
Just stumbled upon this thread as I am in the same situation. Basically, I have a P20 Pro and a Huawei Mediapad M5 Lite that are behaving exactly the same..i.e they cannot play audio from USB to car stereo's USB ports. The internal media can be browsed and played via car stereos interface but you cannot stream music via USB from phone (say Spotify) to car stereo.
USB audio streaming works if I enabled ANDROID AUTO at the car stereo and installed ANDROID AUTO in the phone/tablet. You might ask why not just settle for this setup?
I can, butI I hate so much the AA's "Swipe to Unlock" lock and the changes in the UI when AA is active.
What I want is the plain/original phone interface (without AA) and all audio routed via USB.
Bluetooth, I know is an option, but again, it would be nice if this (USB) can be solved. It seems possible, I think. If AA can switch USB audio streaming on, can other apps or workaround/reverse engineering not?
BTW, i tried playing with the Developer Options, USB Configuration as "MTP or Audio Source" --- no luck here
Just bought a Kenwood DDX6906S receiver for my 2013 GMC Sierra I cannot get anything to work via USB. USB debugging enabled. I feel like I've been going in circles. any help would be super appreciated, TIA
Hi! Im wondering if there is a adapter to plug any HDMI device to an AA headunit? I think the dongle must run an Android OS which let the headunit think there is a AA smartphone connected. But the dongle will stream the HDMI input via USB as AA stream.
I searched for HDMI to Android Auto adapter but there are only tons of adapters to convert an android headunit to Android Auto and CarPlay compabillity.
If such a dongle doesn’t exist yet... may it be possible to realize this with a raspberry pi?
Also interested in this, please someone answer.
I don't know if the product below is what you need.
https://v.youku.com/v_show/id_XNDY1NTU5OTQwOA==.html
If you need to link the Android host to the screen with MDMI, you need to confirm whether your Android host supports this function.