Dear forum,
Long time no talk! I have been able to get "root" for our phones on G925VVRU4BOG7, which anyone can downgrade to. The catch is that even with /system mounted as rw, I am unable to write to it directly through most conventional means. (I can write to /data, though, which means i can patch dalvik-cache, which means my mods are coming ) However, I am able to still write to it using another, more complicated way (I can go into more detail for those interested), as a whole. Here's where you come in-- is anyone still full-rooted? If so, please message me as soon as possible! I may be able to have users who are on newer builds downgrade to older builds and get su properly installed, then manually upgrade back up to the later builds again!
If you are rooted still, all i'm going to have you do is perform this command:
Code:
su
dd if=/dev/block/platform/15570000.ufs/by-name/SYSTEM bs=4096 of=/sdcard/system.img
Then send me that system.img file on your sdcard! It'll be pretty big, so you can zip it or .7z (7-zip), whatever you'd like to do.
I will also need what build you are on. You can just send me your Build number within "Settings->About phone".
First one who does it gets credits on the official release thread i'll make, when I get a procedure down that people can follow!
Thanks!
-Trailblazer101
i have an s6 edge on 5.0.2 rooted. Would that be of help?
Did you get the system.img file? I really wish I could help you. I have this phone on 6.0.1 and stuck without root, but the thing is I really need the root because I bought it used, worked fine the first few days, then didn't get any signal (turns out that it was reported as stolen and of course the IMEI got blacklisted; I tried to contact the seller but he was gone, and his ebay account deleted, so basicly I'm stucked with a ' 5.1" tablet' . I got scammed :/ )
I would be very grateful if you could explain how did you get root on G925VVRU4BOG7 . I know that you want the file mentioned for creating some kind of universal root for the phone, but right now I'm kind of desperate and need root as soon as possible to fix my IMEI issue and I would follow your steps if you made a tutorial.
Thank you very much!
trailblazer101 said:
Dear forum,
Long time no talk! I have been able to get "root" for our phones on G925VVRU4BOG7, which anyone can downgrade to. The catch is that even with /system mounted as rw, I am unable to write to it directly through most conventional means. (I can write to /data, though, which means i can patch dalvik-cache, which means my mods are coming ) However, I am able to still write to it using another, more complicated way (I can go into more detail for those interested), as a whole. Here's where you come in-- is anyone still full-rooted? If so, please message me as soon as possible! I may be able to have users who are on newer builds downgrade to older builds and get su properly installed, then manually upgrade back up to the later builds again!
If you are rooted still, all i'm going to have you do is perform this command:
Code:
su
dd if=/dev/block/platform/15570000.ufs/by-name/SYSTEM bs=4096 of=/sdcard/system.img
Then send me that system.img file on your sdcard! It'll be pretty big, so you can zip it or .7z (7-zip), whatever you'd like to do.
I will also need what build you are on. You can just send me your Build number within "Settings->About phone".
First one who does it gets credits on the official release thread i'll make, when I get a procedure down that people can follow!
Thanks!
-Trailblazer101
Click to expand...
Click to collapse
I am currently running on A0E2 using your rooted rom for this phone. It runs great....except I tried flashing xposed framework using Flashfire and it of course failed...due to the fact that xposed only works on 5.1.1 or above...sucks we are in such a catch 22 with our devices...although I'm happy because I am still rooted.. Anyway...I set up ADB and entered that command you posted and it worked...I just don't know where the storage location of the system.img file is for me to transfer to my PC, 7zip, and send to you. Any help would be excellent....as I desperately want to run xposed framework on my device....but am stuck on 5.0.2
r0ckinb0i said:
I am currently running on A0E2 using your rooted rom for this phone. It runs great....except I tried flashing xposed framework using Flashfire and it of course failed...due to the fact that xposed only works on 5.1.1 or above...sucks we are in such a catch 22 with our devices...although I'm happy because I am still rooted.. Anyway...I set up ADB and entered that command you posted and it worked...I just don't know where the storage location of the system.img file is for me to transfer to my PC, 7zip, and send to you. Any help would be excellent....as I desperately want to run xposed framework on my device....but am stuck on 5.0.2
Click to expand...
Click to collapse
Looking at the last part of the command and if it ran successfully, it should be in /sdcard. Did you ever find it?
gabes100 said:
Looking at the last part of the command and if it ran successfully, it should be in /sdcard. Did you ever find it?
Click to expand...
Click to collapse
Thank you I found it...I'm new to command prompt although I am learning quickly. I found it. I just need to load it onto my computer and compress it so I can send it to Trailblazer. I will do that tomorrow night when I get back home.
I have the img on my computer. It is 4.3G. How do I get it to Trailblazer? Google Drive? EDIT: it is 4.58GB. I am uploading now to google drive, it will an hour
Hi Trailblazer,
Here is a link to system.img:
https :// drive google com / open?id=0B-j3XfGrnj9PbUdwaml5eERvbFU
I am too new to post links the correct way.
Are there any updates on this topic? When I first saw this thread last week, It got me thinking about what a Tethered Root (Temporary/Semi - Root) would still be capable of doing for those of us still on Official Firmware in this day and age.
And really it occurred to me at that moment, that if we could just attain a Root Shell even if it was only for 60 seconds to five minutes, that would be sufficient to get enough root information off of the phone and into a PC editable format.
I ask, because I am in the process of forming a method for the G925V 6.0.1 [PI2] Build. The problem I'm pretty sure I'm going to run into sooner or later in my experiments/research, is the fact that I am one of the few who have the 64GB Verizon S6 Edge. Technically speaking, my device refers to itself in Download/ODIN mode as a SM-G925VZKE model. This also means that my Stock .PIT file is going to be very different than most people's, also meaning my FSTAB configuration probably will be different.
Because there shouldn't be a reason I can't at least get a temporary Root Shell very soon.
So whats up with this? My wife has 6.0.1 on Verizon and I have international much better choice. Will we have root on this phone?
If you are currently on 6.0.1 on your Verizon device. It would serve you well for the time being to disable Automatic Security Updates.
Settings > Lock Screen and Security > Other Security Settings > Security Policy Updates
Turn OFF Automatic Updates, and Turn OFF Wi-Fi Only.
If you leave these on, any potential root option will be patched by Samsung/Google before you know it exists. Disable it for now so you can find an exploit for the build the device is on.
UPDATE:
So apparantly, I've had a rooted 6.0.1 PI2 device persistent through factory resets for over a week, but didn't realize just how much was achieved on my device! According to diagnostics.
I'm already started on writing up the combination of methods that the OP was walking into. Turns out it works up to the September patch too.
But lucky me and not you this time. I got my device essentially decommissioned because I ran my code too soon. But in the sweetest possible way after being so pissed when my tech coach said my warranty was void.
By the end of tomorrow night I should have a thread.
Anyone still working on this?
d0lph said:
Anyone still working on this?
Click to expand...
Click to collapse
Yes. Using the dirtycow vulnerability we've managed to get an arm64 version running that will indeed allow a root console on MM builds.
The last thing standing in the way, for at least a tethered root, is for someone to help me convert the script from the flashable zip version of the SuperSu installer into basically a batch script. Because the how-to guide ChainFire wrote in comments inside his installer script is kind of hard to read because it covers all the different versions of android in a tiny block of text and not every device sets up the same SELinux environment.
Not to mention, if I could get SuperSU to try and install itself as a System Application, it would probably work with what I have already. But for some reason I CANNOT find a single guide anywhere on how to perform a "System" Install of SuperSU, everyone wants to use the "Systemless" version, which is NOT going to work I believe.
We can manage booting the device in the event of DM-Verity Failure, when that happens with the 5.1.1 OG ENG Kernel, we can indeed mount "/system" as read/write, and we can indeed change the contents of the System partition that persist through a reboot.
I just need help setting Perms & Contexts. Because at one point in time, I DID actually manage to get SuperSU to give me a root shell instead of a user shell, but only on the ADB Command Line. In that test I could not get an application to start from the launcher and have Root Permissions.
Delgoth said:
Yes. Using the dirtycow vulnerability we've managed to get an arm64 version running that will indeed allow a root console on MM builds.
The last thing standing in the way, for at least a tethered root, is for someone to help me convert the script from the flashable zip version of the SuperSu installer into basically a batch script. Because the how-to guide ChainFire wrote in comments inside his installer script is kind of hard to read because it covers all the different versions of android in a tiny block of text and not every device sets up the same SELinux environment.
Not to mention, if I could get SuperSU to try and install itself as a System Application, it would probably work with what I have already. But for some reason I CANNOT find a single guide anywhere on how to perform a "System" Install of SuperSU, everyone wants to use the "Systemless" version, which is NOT going to work I believe.
We can manage booting the device in the event of DM-Verity Failure, when that happens with the 5.1.1 OG ENG Kernel, we can indeed mount "/system" as read/write, and we can indeed change the contents of the System partition that persist through a reboot.
I just need help setting Perms & Contexts. Because at one point in time, I DID actually manage to get SuperSU to give me a root shell instead of a user shell, but only on the ADB Command Line. In that test I could not get an application to start from the launcher and have Root Permissions.
Click to expand...
Click to collapse
Thank you for taking the time to still work on this. Subscribed. Following this to the T.
Rand0lph said:
Thank you for taking the time to still work on this. Subscribed. Following this to the T.
Click to expand...
Click to collapse
If you want to follow the complete story of what I just mentioned please follow and contribute to this thread: Injecting Root & Setting SELinux - End Stages?
This is the thread that contains the Greyhat Root console, first designed for the AT&T Galaxy Note 5. But that device uses the same Exynos7420 Mainboard as the Galaxy S6 Edge, so the project is still compatible.
I haven't kept the OP maintained as I should yes. But it is actually worth it to read that whole thread as @droidvoider went out of his way explaining some of his methods. I have a bit of R&D that isn't posted in that thread as well, if you can read up on the project. I'd be more than happy to share what I know with anyone wanting to help as long as they can catch up with what we have accomplished so far.
Look at some of the other threads I've started as well for the initial methods.
Delgoth said:
If you want to follow the complete story of what I just mentioned please follow and contribute to this thread: Injecting Root & Setting SELinux - End Stages?
This is the thread that contains the Greyhat Root console, first designed for the AT&T Galaxy Note 5. But that device uses the same Exynos7420 Mainboard as the Galaxy S6 Edge, so the project is still compatible.
I haven't kept the OP maintained as I should yes. But it is actually worth it to read that whole thread as @droidvoider went out of his way explaining some of his methods. I have a bit of R&D that isn't posted in that thread as well, if you can read up on the project. I'd be more than happy to share what I know with anyone wanting to help as long as they can catch up with what we have accomplished so far.
Look at some of the other threads I've started as well for the initial methods.
Click to expand...
Click to collapse
Sorry, I didn't even acknowledge this is for the EDGE S6. I have a regular Verizon S6.
Rand0lph said:
Sorry, I didn't even acknowledge this is for the EDGE S6. I have a regular Verizon S6.
Click to expand...
Click to collapse
I don't really think that matters as much for the thread I referred to.
I tested the Greyhat Root Console on my S7 Edge, and it worked as well using the September build.
The S6 Line plus the Note 5, all use the same System on a Chip.
If anything, there may be just a couple tweaks to make when compiling it using the NDK.
I have two G9+ phones, both rooted with Adaway installed. One has the stock ROM (Android 10) & the other has LineageOS 18.1.
On the phone with Lineage there are no ads when running a particular game. The same version of the game on Moto Android 10 has ads.
There is some app I don't understand called Moto GameTime that appeared when I started the game but I have disabled it. (I tried to move GameTime out of system using system/app mover but I got an error: "Could not remount /system".)
Still, Google ads appear with the stock ROM despite having Adaway.
Everything looked ok in Adaway. It tells me its three sources are up to date. When I try to reload & reinstall hosts from those sources I get an error: "Unable to copy hosts file to /system partition. Please check Magisk systemless module is enabled the reboot." (Magisk Manager shows Magisk 23.0 is installed.)
Something is causing problems that seem to involve lack of access to the /system partition. I don't know if that is related to the appearance of ads on the stock ROM, but any thoughts? How can I fix this?
As I've stimulated no response here, I took the ugly step of wiping the phone, flashing the experimental LineageOS and restoring everything from backup (not a fully successful process because the data for certain apps was not backed up by Super Backup & Restore).
At least there are now no ads getting through onto the phone.
The issue you are having is related to stock Android 10. It does not allow you to make any changes to the system partition, as it won't allow you to mount it as r/w. There is a workaround for it (currently in development stages). It's a flash able zip script that dumps the super partition "fixes" it and flashes it back. Your phone must have the bootloader unlocked and be rooted for it to work. It currently works for A only devices without any issues, but is throwing an lpmake error 73 for mysterious/unknown reasons, but a fix is in the works. I will post a link when I get home.
I assume the phone is rooted with Magisk which is a systemless root method. Even with older devices /system remains unmodified. All changes are only overlays/modules managed by the Magisk App.
doktorspin said:
(I tried to move GameTime out of system using system/app mover but I got an error: "Could not remount /system".)
Click to expand...
Click to collapse
This could also be done with a own module. See instructions here.
Keven11 said:
The issue you are having is related to stock Android 10. It does not allow you to make any changes to the system partition, as it won't allow you to mount it as r/w.
Click to expand...
Click to collapse
Thanks. I decided to replace the stock ROM with LOS18.1. That problem solved. (Got a new one: can't use data over the phone connection.)
doktorspin said:
Thanks. I decided to replace the stock ROM with LOS18.1. That problem solved. (Got a new one: can't use data over the phone connection.)
Click to expand...
Click to collapse
I fixed the issue by ditching Android 10 for LOS 18.1. But thanks for the pointer.
doktorspin said:
Thanks. I decided to replace the stock ROM with LOS18.1. That problem solved. (Got a new one: can't use data over the phone connection.)
Click to expand...
Click to collapse
I'm glad you got it figured out. The data issue, along with many other bugs will be rectified any day now with the new release. The issue you are having with LOS 18.1 is because at the time of development the kernel for A11 hadn't been released by Moto yet. However, they did finally release it a little under 2 weeks ago. So the new version of it will be much much better. It will be linked to the same link I posted. It's just a matter of time now, and not much of it.
Telegram Odessa Devs and testers group: https://t.me/joinchat/SaZ2BX0M8bQmkioW
Hey everyone,
after some trial and error, I was able to pass Safety Net.
I just want to mention what I did in the process to get there. May have been a combination of things or just one...
1. I followed this guide, but make sure you notice that It's for the Pixel 5 not 5a. But the process is similar. This process didn't fix the issue. However, it's also a good how-to on how to root. I did also modify the props to the 3a.
How to Root the Pixel 5 & Still Pass SafetyNet — Full Guide for Beginners & Intermediate Users
The Pixel 5 is a great value proposition in this era of $1,500 phones. With its reasonable price tag, fully open-sourced software, and unlockable bootloader, it's also an ideal phone for rooting.
android.gadgethacks.com
2. When that didn't work, I followed this video, and hid all my banking apps besides the Google Play Services:
3. When that didn't work, I installed these both using Magisk from this post:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
4. Cleared my data and cache with Google Play and GPay + any other banking apps.
That worked for me!
EDIT: IF GOOGLE MAPS reports the wrong location, its likely XPrivacy-LUA, Google Services. Uncheck some of them.
Oh man....the only thing holding me back is the safety net thing, and it looks like we have a work around tell someone has an actual method made for this phone. Not sure if I'm ready to actually mess with this yet...but thanks for the post, bro!
anubis2k3 said:
Oh man....the only thing holding me back is the safety net thing, and it looks like we have a work around tell someone has an actual method made for this phone. Not sure if I'm ready to actually mess with this yet...but thanks for the post, bro!
Click to expand...
Click to collapse
Didnt think it was that big of a deal to me. But it was fun with a new phone with nothing on it.
This was the Magisk module that worked to pass safety net for me. I didn't need any others.
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
Google Pay "appears" to be working too. Haven't gone out and tried it yet though.
joemommasfat said:
Google Pay "appears" to be working too. Haven't gone out and tried it yet though.
Click to expand...
Click to collapse
That's the part that I use the most, and the reason I haven't rooted yet. Please let us know if it works. Much appreciated!
I can confirm that using google pay (newer GPay app) on my rooted 5a works at merchants. I've already used it several times over the last week or so with no problems.
Deadmau-five said:
3. When that didn't work, I installed these both using Magisk from this post:
Click to expand...
Click to collapse
Why? Isn't the shim version just for Samsungs? Either way, it's the same mod, just different versions.
Someone who actually knows what they're doing needs to write up a tutorial. Following instructions posted by people who have no idea what they're doing but "it works" for them is dangerous.
borxnx said:
Why? Isn't the shim version just for Samsungs? Either way, it's the same mod, just different versions.
Someone who actually knows what they're doing needs to write up a tutorial. Following instructions posted by people who have no idea what they're doing but "it works" for them is dangerous.
Click to expand...
Click to collapse
You're absolutely correct about the dangers in following instructions posted by who knows who. I'll go further and say when it comes to root and associated items stay away from anything posted on a site other than XDA. In many cases even if the instructions were correct at some point in time they may well be outdated now.
I haven't rooted yet for a few reasons yet but will, hopefully sometime very soon. In the meantime I can state the following:
They're is no need to modify props. Modifying props to identify as a different phone would only be required for custom ROMs that don't handle it themselves (or some non-certified Chinese phones, which doesn't apply here). If you're running stock just leave that portion alone. And, if I'm not mistaken (although not 100% certain) I think safetynet-fix takes care of that for you in any case.
You will definitely need kdragOn/safetynet-fix.
Hopefully that's all you need.
I'm not sure which version of Magisk you'll need. Unless you know what you're doing and how to get out of trouble I recommend staying away from the current alphas, they're extremely cutting edge and you can expect problems.
Best best is to check the following threads and see what's going on:
Actually see this post and the 2 posts immediately following
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
That should pretty much cover things for the moment. If nobody else (@hfam ?) has done it by the time I get around to rooting I'll write something up specific for the 5a.
I only mentioned what works for me since there was no step-by-step guide.
Dangerous how? Doing any mods to your phone is "dangerous". I fail to see how this is more so than others. Modifying your phone is risky.
If it didn't work I wouldn't have posted this guide. I only mentioned the steps that I took. It's not really a guide, just how I passed safety net.
But, my 5a has still been working great since then. GPay included.
jcmm11 said:
You're absolutely correct about the dangers in following instructions posted by who knows who. I'll go further and say when it comes to root and associated items stay away from anything posted on a site other than XDA. In many cases even if the instructions were correct at some point in time they may well be outdated now.
I haven't rooted yet for a few reasons yet but will, hopefully sometime very soon. In the meantime I can state the following:
They're is no need to modify props. Modifying props to identify as a different phone would only be required for custom ROMs that don't handle it themselves (or some non-certified Chinese phones, which doesn't apply here). If you're running stock just leave that portion alone. And, if I'm not mistaken (although not 100% certain) I think safetynet-fix takes care of that for you in any case.
You will definitely need kdragOn/safetynet-fix.
Hopefully that's all you need.
I'm not sure which version of Magisk you'll need. Unless you know what you're doing and how to get out of trouble I recommend staying away from the current alphas, they're extremely cutting edge and you can expect problems.
Best best is to check the following threads and see what's going on:
Actually see this post and the 2 posts immediately following
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
That should pretty much cover things for the moment. If nobody else (@hfam ?) has done it by the time I get around to rooting I'll write something up specific for the 5a.
Click to expand...
Click to collapse
Just a quick note to say I just finished with everything (new Pixel 5a 5G, rooted + Safety net, restored all my apps, etc) and it's a flawless victory, ALL banking apps work great, SafetyNet passes, no hiccups.
I'd be happy to craft up a step by step and post it if there's some interest. It's not often I get to give back to this outstanding community, so it's the least I can do jumping on the opportunity. UFC 266 Main card is just starting, so I'll get started right after the fight and post it here in this thread.
Great to see ya again @jcmm11! Coming back to root a new phone feels like a family reunion, so great to see many of you active folks still here helping out!!
hfam
Alright, as promised, here is my writeup for a step-by-step tutorial for rooting your new Pixel 5a and getting SafetyNet up and going. I know it looks like a book, but I wanted to put it into plain language and attempt to explain the process for everyone, even absolute first timers. I know when I first started I really appreciated when the person helping didn't presume I had any knowledge, so for those that may have some experience, sorry for the wordiness. I'll also include how I apply updates when a new Android security update is pushed out. I understand that there are now elegant ways to accept OTA updates, but that is out of the scope of this tutorial as I have always had issues with OTA, and have to catch up on how that works myself. I can attest to years of using this method though (using a full factory image) to perform the "monthly" security updates, and I have never had anything but full success, so I'll share that here below the rooting tutorial.
*Disclaimer and heads-up* this is for an UNLOCKED PIxel 5a purchased directly from Google Store. At the time of this writing that is the only place I'm aware of which currently offers the PIxel 5a. Once carriers like Verizon, etc, offer this device, there may be some changes to the process, so just know up front this is for the unlocked Pixel 5a*
*WARNING*! When you unlock the bootloader on your phone it WILL WIPE YOUR PHONE and reset it to factory. If you've already used your phone and set it up, you're going to lose that setup. If you can't bear it, then the rest of this isn't for you, as root cannot be achieved without unlocking the bootloader.
First, you'll need a few things
- https://developers.google.com/android/images
and download the latest FACTORY IMAGE for "barbet", which is the Pixel 5a. You want to download the SAME VERSION that is currently installed on your device. At the time of this writing, it's the September release.
From that same page, you will need the ADB+Fastboot platform tools which will allow you to perform the required tasks, download from this link:
- https://developer.android.com/studio/releases/platform-tools.html
I use Windows 10, and extract this tools download to a folder in the root of C: called "platform-tools". You will then need to add "c:\platform-tools" to your environment path.
On the Pixel 5a, you need to enable developer options. Go into Settings/About Phone/and tap "Build Number" 7 times. This enables developer options and it will let you know when you've unlocked this as you tap 7 times. Once developer options is unlocked, go back to Settings/System/Advanced, and you'll see Developer Options is now available.
Select Developer Options, and enable "USB Debugging" and also enable "OEM Unlocking".
(**NOTE** For now at least, until you decide how you want to proceed with handling updates in future (more on that later), I strongly recommend turning OFF "Automatic System Updates" as well, just a few items below "OEM Unlocking". This prevents any updates happening automatically on a phone reboot. You don't want to wake up and find an OTA update pushed out and removed root, or worse. You can always turn it back on later.)
Plug your phone into a USB port on your PC. Allow the PC to do it's thing. You can open up Computer Management on the PC (right click the windows menu button icon lower left of your toolbar and select "Computer Management". Select "Device Manager" on the left panel. You should see "Android ADB Device" appear at the top of the right pane list of devices. if not, then visit:
Install OEM USB drivers | Android Studio | Android Developers
Discover links to the web sites for several original equipment manufacturers (OEMs), where you can download the appropriate USB driver for your device.
developer.android.com
and download the appropriate USB driver for your system and retry the above directions.
First thing we have to do is unlock the bootloader.
On the PC, open a command prompt and change directory to "C:\platform-tools" as discussed above.
Now, type in "adb reboot bootloader". The phone will reboot into bootloader. (you may receive a dialog on the phone which says something to the effect of not recognizing the PC. Go ahead and allow it, check the box to allow it in the future, and proceed.
Phone is now at the bootloader, and shows you some info letting you know it's so, including that the bootloader is locked. Also, look at the Device Manager we opened earlier and confirm that you see Android ADB Device (or similar) which confirms your PC recognizes the phone and setup for ADB commands .
To unlock the bootloader, in the command prompt type:
fastboot flashing unlock
This will unlock the bootloader, you will likely see a warning that it's going to wipe the phone. Proceed and allow the unlock. The phone will then reboot and take you to your wiped phone just as you received it out of the box, except the bootloader is now unlocked and Developer Options are still available. Let the phone continue through it's first-time setup, and leave the phone plugged into the PC. If you unplugged no biggie, but we're going right back to the PC shortly and it will need to be plugged back in before the next step to accept the file we're going to push to it.
Now, you want to open a browser on the phone and go to (at the time of this writing, v23.0 is the current stable Magisk):
Release Magisk v23.0 · topjohnwu/Magisk
This release is focused on fixing regressions and bugs. Note: Magisk v22 is the last major version to support Jellybean and Kitkat. Magisk v23 only supports Android 5.0 and higher. Bug Fixes [App]...
github.com
Scroll down and under "Assets" select that Magisk 23.apk file, download and install it. Open Magisk if it doesn't open on install, and just let it sit, we're coming back to it shortly.
PATCHING THE BOOT.IMG FILE
On the PC, go back to the Factory Image you downloaded, and extract it to a temporary directory. You will see 6 files; a few "flash-all" files, a radio image, a bootloader image, and a ZIP file called "image-barbet-XXXXXXXXXXX.zip (the xxx's are whatever the version number is you've downloaded). Double click that ZIP file and you will see a dozen files. The one we need to root the device is "boot.img".
Copy (don't move!!) this file to c:\platform-tools. Now, go back to your command prompt (still pointing to c:\platform-tools) and type in:
adb push boot.img /sdcard/Download
Now back on the phone, within the Magisk app we left open, at the top where it says Magisk, choose to install. A dialog box will open, select Patch Boot File Image. Point the process to your /sdcard/Download, and select the boot.img file we just pushed there. Now allow it to patch the boot.img and Magisk will show you it's patching it, and in a moment tell you it was successful. Close the Magisk app, open "Files" and direct it to sdcard/Download. Note the name of the patched boot file, which is called "magisk_patched-XXXXX_xxxxx.img (the X's are the Magisk version, and the x's are 5 random chars). Feel free to leave it there as you go back to the PC...
Back on the PC, in the command prompt, now type:
adb pull /sdcard/Download/magisk_patched-XXXXX_xxxxx.img
make certain you get the name exact or it won't go, no worries, just get it correct. The file now resides in the "c:\platform-tools" directory along with the unpatched "boot.img" and your ADB+Fastboot tools.
Just about done rooting, here we go!
Now, in the command prompt type:
adb reboot bootloader
The phone reboots into bootloader. Now type:
fastboot flash boot magisk_patched-XXXXX_xxxxx.img (again, use the numbers and letters in YOUR patched file!)
Lastly, type:
fastboot reboot
Your phone reboots, and you should be rooted!! Unplug your phone from the PC, open up Magisk App and confirm, the Magisk entry at the top of the main Magisk App screen should now show you the version you installed, etc!
Time to get your banking apps (and any others that may detect unlocked bootloaders/root/etc) working!
In the Magisk App, on the bottom of the screen is a 4 item menu bar. Select the right-most icon, which is "Modules". At the top of the screen select "sorting order" and sort alphabetically. Scroll down to "riru" and select the module that is JUST "RIRU", (not any of the other "riru _______" modules). Choose to download it, then choose to install it. You'll be prompted to reboot the phone, so reboot the phone.
Next, we're going to install drag0n's Universal SafetyNet fix (at the time of this writing it's currently v 2.1.1) You will need to download this via a browser on your phone, so open a web browser and go to:
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
On the right-hand side, you'll find "Releases", and v2.1.1 is the latest. Select that, then scroll down to "Assets" and download "safetynet-fix-v2.1.1.zip" By default this will download to sdcard/Download.
Go back into the Magisk App, select the "Modules" menu as above, and at the very top select the "Install from Storage" bar. Point to the file we just downloaded and install it (don't extract it, etc, it requires the zip exactly as downloaded and will do it's thing). Again, it will install the module and prompt you to reboot. Reboot.
Almost there!
At this point, if you havent installed your banking apps, do so. DON'T RUN THEM, just install them. I also have a Nintendo Switch Online app which failed because of root, so if you also have or want this app, install it now, again, do NOT run it yet, just install. Same with any other apps you are aware which have root/bootloader unlocked issues, get them installed, but don't run 'em.
Now, we're going to use MagiskHide to hide these apps and complete the process for passing SafetyNet and running apps which may not run due to root.
in the Magisk App, at that 4 item menu bar at the bottom, select the 2nd from left, or "MagiskHide". Select the MagiskHide item and it will open to a scan of all the apps on your system. By default I believe Magisk sets up to hide Google Play Services. You will see it selected, and all the other apps on your system unselected. Select each of the banking apps, the Nintendo Switch Online (if you have it), and any other apps that YOU ARE SURE will complain about unlocked bootloaders and/or root. Any onilne gaming that's popular are good choices, but again, it's easiest to NOT RUN them PRIOR to hiding them via MagiskHide. Pokemon GO comes to mind as one I've seen that needs hiding, etc, so make it easy on yourself and do a little research on any suspect apps prior to running them, then hide them if needed.
Anyhow, select your banking apps to hide them.
Now, we're going to check SafetyNet to make sure youll now pass.
On the Home menu in the Magisk App, select "Check SafetyNet". You will be prompted to download some proprietary SafetyNet shhhhhhhtuff....so let it download. Once done, SafetyNet check will open, and you should show a blue screen which says SUCCESS, and "basicintegrity" and "ctsProfile" will be checkmarked, evalType will show BASIC.
You're good to go, rooted, SafetyNet works perfect, and you can now open your banking apps and should open right up!!
If you find any specific issues about specific apps not working, or detecting root, etc, the best place to get help is in the Magisk General Discussion forum:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
I owe those folks eternally for showing me what I know, and always having the answers for any issues I've ever had. Some of the nicest, smartest people Ive had the pleasure of knowing, they're always helpful, and even maintain fantastic sites for FAQ and chock full of great info about every aspect of Magisk.
BONUS ITEM: As I indicated above, I'd share the method I know, trust, and have used many many times, trouble free, to apply a system update to the phone without overwriting anything, and not hitting any issues many encounter using the OTA method (though I understand that's been vastly improved, I haven't educated myself as to that process and will likely continue to use this method).
Security Update (monthlies) Process using Full System Image
As above, download the newest Full Factory Image from the site. Extract this full image to a directory inside C:\platform-tools
In this directory, if you're on Windows, open the "flash-all.bat" file (don't run it, open it with Notepad or something similar, I really like Notepad++ as it's free, has a LOT of great functionality and, like the native Notepad, doesn't do any goofy formatting/fonting/etc when modifying and saving a file.)
In flash-all.bat, look for the "-w" entry in the fastboot command near the end of the file and REMOVE ONLY THE "-w", leaving the line correctly formatted (don't leave an extra space or something goofy), then save the file over the top of the original with the same name. This will remove the overwriting of your data when pushing the image, the "-w" tells the process to overwrite, so we remove it.
Open up a Windows Explorer and go to your c:\platform-tools directory. Delete (or move to another location) any "boot.img" files along with any "magisk_patched-XXXXX_xxxxx.img" files from previous operations. Also note and confirm that you have correctly extracted the latest Full System Image to it's own directory, residing in c:\platform-tools.
Now, connect your phone to the PC. Open your command prompt and point to "C:\platform-tools" again. Type: cd <name of Full system Image directory>
In command prompt, type:
adb reboot bootloader
The phone is now in bootloader. In command prompt, confirm you're pointing to "C:\platform-tools\<Full System Image extract dir>" Type:
flash-all
This will do a full factory image push to your phone, you'll see a couple quick writes and phone reboots, then begins writing the rest of the image to your phone, but since we removed the "-w" from "flash-all.bat", it's NOT overwriting your data, just the necessary system files to update it to the latest version!
Reboot your phone, let it do any optimizing and updating it needs to do, and don't run anything yet, we're not quite done, just let the phone settle in and finish booting and doing it's thing.
Now, go back and perform the steps above listed under "PATCHING THE BOOT.IMG FILE" to patch the newest boot.img from the Full System Image we just updated the phone with (push the boot.img to sdcard/Download, patch with Magisk App, pull magisk_patched-XXXXX_xxxxx.img to your PC, blast it back using fastboot), and you've now rerooted the phone.
Lemme just say again that I know this was a friggin' book, and I tried to make it as clear and plain language as I could to help even a first timer, so my apologies if it seems like an onerous process. It's really not, and once you've done this once or twice, it's a cakewalk and takes about 10 minutes of your time from start to finish to do the whole system update and reroot. Again, the newer methods to take OTA without losing root may be something you'd like to look into, i definitely will, but I'm very confident in sharing this method as I know it works like a champ and is foolproof if you take your time the first few times and make sure you do what's required (remove the "-w" from the flash-all.bat, etc)
Lastly, I've been using this method since the Pixel 2, and just performed it on my new 5a, it worked exactly as it has for years for me on the P2, so you can be confident moving forward that, if you follow instructions and take your time until it's all familiar, you'll be successful in rooting, passing SafetyNet, and applying system updates without screwing up the A/B slots or overwriting your data in the process.
I hope this helps even one person, and since I rarely find myself able to give back to the community in any real meaningful way (many of these folks are WAAAY beyond my modest skills and know so much!!), I hope that this provides some folks with a useful and meaningful tutorial, providing confidence that anyone can root their P5a (or about any Pixel it seems) without being a Magisk/Android prodigy.
@Didgeridoohan, @pndwal, @zgfg, @jcmm11, and so many others over the years have been so helpful, I couldn't have done any of this without their selfless help, so give those folks a big thanks also if this is any help to you.
Best of luck,
hfam
Thanks for the write-up @hfam, it's good to know that some of the steps that i tried aren't really necessary, like using props config or hiding the actual magisk app.
Appreciate you!
nsoult said:
Thanks for the write-up @hfam, it's good to know that some of the steps that i tried aren't really necessary, like using props config or hiding the actual magisk app.
Appreciate you!
Click to expand...
Click to collapse
Awww, thanks! Glad to do it and really hope it helps some folks tackle rooting their phones and passing SN!
Rooted with magisk v.23 - flashed zip as a module
So has anyone installed the October update yet?
GrandAdmiral said:
So has anyone installed the October update yet?
Click to expand...
Click to collapse
Yep, good to go. I used the same method I shared above.
Is this working with Android 12? Which Magisk version to use?
This method did not work for Android 12. I updated my rooted phone to android 12 OTA. It returned to stock. I followed the method above to patch the factory boot.img file with magisk. After flashing my phone in bootloader with the patched boot.img, my phone will not reboot. says:
failed to load/verify boot images
Any advice? My Magisk is v23. Do I need to use a beta version?
Poking around in this thread, it seems that android 12 root is a much more involved process, requiring factory wipe and additional steps.
[Guide] Flash Magisk on Android 12
Trying to root the Pixel 5 running Android 12 by flashing a magisk-patched boot image results in the phone only booting to fastboot mode ("failed to load/verify boot images") Some users have reported that booting (instead of flashing) the patched...
forum.xda-developers.com
tintn00+xda said:
This method did not work for Android 12. I updated my rooted phone to android 12 OTA. It returned to stock. I followed the method above to patch the factory boot.img file with magisk. After flashing my phone in bootloader with the patched boot.img, my phone will not reboot. says:
failed to load/verify boot images
Any advice? My Magisk is v23. Do I need to use a beta version?
Click to expand...
Click to collapse
As you stated, you are correct. You need to perform a full wipe or flash the factory image with a wipe and then root works fine and phone boots. Tried myself and works fine.
Hya,
i have a sagit phone, with lineageos 18.1 on it, pioneer head unit capable of AA and CP. Until last weekend, it worked fine. After an error, where i had to factory default the phone and reinstall the apps again,i get the message "Phone permission needed to take calls. When it's safe, turn on the phone permission in Settings."
But all permissions are set for AA, including phone.
Any hint in how to solve this?
Thx in advance!
Did you check your Bluetooth settings if phone permission is on for your pioneer head unit Bluetooth connection?
Hi, same problem, not tried yet with bluetooth settings as suggested above. Did it work? ('m lazy to make a new attempt with LOS 18.1, I explain why below)
So if it's not working with the tip above, I give here some clues :
I recently upgraded my Sony X Compact from Android 8 to lineageos 18.1 (Android 11) with MindTheGapps installed. Everything works fine except these call permissions.
I decided, after several failures, to test LOS 17 and calls are now possible from AA.
In Android 11, AA is natively integrated. In A10, it's not, it doesn't appear in the bluetoth/NFC settings, like in Android 8. Does this make the difference? A8 and A10 seem using the same permissions process, A11 not.
About permissions, I found another thread close to my issue and could be related: https://forum.xda-developers.com/t/linageos-16-overlay-permission-denied-but-it-is-checked.3924101/ . I tried the second method (Magisk) but it gave nothing and I'm just a newbie in Android world to try the other methods.
Any suggestions ?
Update from last reply
I finally installed LOS 19.1 (Android 12) with still MindTheGapps and everything works perfectly with AA. So it doesn't seem to be an Android version issue but rather LOS 18.1 itself or MindTheGapps. Maybe by using other gapps you'll get it work (I didn't try).
Hi,
I've upgraded my 9 y.o. Galaxy Note 4 to LineageOS 18.1 recently and was very happy with it until I stumbled on the same problem.
Android Auto claimed to have phone permission in the Application settings but the permission was impossible to change (mandatory/grayed out) and the unit in my Civic 10 was showing the same error as pw44's.
Having no UI to fiddle with, I thought maybe that can be tweaked with some ADB command, and after some reading here:
How to Grant Permissions Using ADB in Android
It can be tricky to grant advanced permissions to Android apps without rooting your phone. Here's how you can use ADB to achieve it.
www.makeuseof.com
and there:
Listing permissions of Android application via adb
Using adb, how can I find out the which permissions an Android application requires? Because I want to display the permissions of multiple applications on different devices, viewing them in Google...
stackoverflow.com
I came up with a command that fixed it:
adb shell pm grant com.google.android.projection.gearhead android.permission.CALL_PHONE
Obviously, I googled that exact command and found confirmation here:
Lineage OS 18.1 Xiaomi Redmi Note 6 Pro cant phone calls in Android Auto (#5092) · Issues · LineageOS / issues / android · GitLab
Expected Behavior Realize phone calls in Android auto Current Behavior Android auto...
gitlab.com