Database Develop

Won't stay in fastboot mode

Hello guys, i have a problem:
I haven't used this phone in a while and i can't make it stay in fastboot mode:
I disabled driver signature enforce, reinstalled drivers(adb & fastboot) and still nothing. In adb it's working but when i rr into fastboot, after 10 sec the phone is restarting.
I know there is a solution, but i forgot what was it.
Can you help me please?

Mi3 W bricked ( please help )

Hi All,
Hope some will help guide me to the right way
Its My friend phone Mi3
I tried to update his phone using updater in miui, after choose update rom cancro .zip just finish sucessfull but restart like nothing happen.now Simcard not detected.
I tried to reset factory, failed it just delete some of it but data still there, so went to recovery ( in chinese just know the word emmc , so i choose to wipe data) successfully reseted .
Ok fine, i tried to root using kingroot ( success ) after that i tried to flash twrp, nothing happen, so try to enter fastboot (manual and adb)it just restart and came back to system, tried to go into recovery also the same reboot and nothing happened.
In adb mode ' adb devices ' detect 0123456789abcdef , when i check in phone imei and baseband 'unknown'
Already tried fix using adb shell but failed
miui pc suite not detecting phone
Try most driver suggested not working
Pc just detect storage only
So now
The phone
-boot normaly,
-no sim detected
-rooted by kingroot but cant flash twrp
-wifi useable (working)
-no imei (unknown)
-no fastboot ( cant go edl mode)
-recovery mode just (chinese ,test mode... And emmc deleted)
This Mi3 W
-Cannot enter or go into Fasboot manually or adb command ( so cannot miflash, flash boot or recovery img, cant edl mode)
-tried flash twrp but cannot boot to twrp recovery
So most unbricked steps need to go into fastboot in order to recover back. Is there any other way?
Please help
Im blurred rite now

Anybody?

I don't understand be a bit clear and specific
Which ROM was the phone on before flashing?

hi
1. please first try fastboot rom flashing via EDL...
for going to EDL ;
on adb ;
# reboot edl
or with a EDL cable ...
or via test point ;
photo ; https://1.bp.blogspot.com/-wKylsSuw...Xe7YbdcIsaIgCK4B/s640/mi3_9008_test_point.jpg
2. or restore qcn via qpst from here ; https://drive.google.com/open?id=0B4oUiKSTOb7oRUhPUm5kekpTOUk

Xiaomi Mi 5x Bricked, Need help.

Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!

Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.

SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.

I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.

I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.

eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?

I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e​

Help Please My A2 BlackScreen Fastboot

Help Please My A2 BlackScreen Fastboot and also my computer can detect the phone

After the black screen phone goes to fastboot mode?
İf it goes then i think you tried to root with magisk (flash patched_boot.img) just flash back original boot.img

stuck on corrutted screen

iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!

You give problem because your'Mg3 not yet uninstall root complete, so Android system prevent it booting.
=> Solution:
- Step 1: re-unbrick your phone with unbrick tool (eu).
- Step 2: reboot to bootloader.
- Step 3: fastboot oem nubia_unlock NUBIA_NX629J
- Step 4: use volumn up or down to choose line with content "unlock bootloader". Then wait for your phone working. => Done
≠==========================≠
|Source: sSjBlue197 (vietnamese).|
|Contact: fb.com/ssjblue197. |
≠==========================≠

Nanilucky11 said:
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
Click to expand...
Click to collapse
Enter bootloader POWER BUTTON+VOLUME DOWN
Use PC enter adb command :
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
Then, reboot device
enter command
"fastboot reboot"